Commit Graph

740867 Commits

Author SHA1 Message Date
Thomas Hellstrom
89dc15b76f drm/vmwgfx: Stricter count of legacy surface device resources
For legacy surfaces, they were previously registered as device resources
when the driver resources were created. Since they are evictable we instead
register them as device resources once they are created on the device,
just like for guest-backed surfaces. This has implications during
hibernation where we can't hibernate with device resources active.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22 12:08:24 +01:00
Himanshu Jha
6073a09210 drm/vmwgfx: Use kasprintf
Use kasprintf instead of combination of kmalloc and sprintf. Also,
remove the local variables used for storing the string length as they
are not required now.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22 12:08:24 +01:00
Thomas Hellstrom
4e3e733b45 drm/vmwgfx: Get rid of the device-private suspended member
It was used to early block fbdev dirty processing. Replace it with an
unprotected check of the par->dirty.active field. While this might
race with the vmw_fb_off() function, we do a protected check later so
the race will at worst lead to grabbing and releasing a couple of locks.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22 12:08:23 +01:00
Thomas Hellstrom
c3b9b16573 drm/vmwgfx: Improve on hibernation
Make it possible to hibernate also with masters that don't switch VT at
hibernation time. We save and restore modesetting state unless fbdev is
active and enabled at hibernation time.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22 12:08:23 +01:00
Thomas Hellstrom
bf833fd36f drm/vmwgfx: Avoid pinning fbdev framebuffers
fbdev framebuffers were previously pinned to be able to keep them mapped
across updates.

This commit introduces a mechanism that instead revalidates the map on
each update, keeping the map cached across updates. The cached map is torn
down if the underlying pages change. Typically on buffer object moves and
swapouts.

This should be nicer to the system when we have resource contention.

Testing done: Basic fbdev functionality under Fedora 27.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-03-22 12:08:23 +01:00
Thomas Hellstrom
dc366364c4 drm/vmwgfx: Fix multiple command buffer context use
The start / stop and preempt commands don't honor the context argument
but rather acts on all available contexts.

Also add detection for context 1 availability.

Note that currently there's no driver interface for submitting buffers
using the high-priority command queue (context 1).

Testing done:
Change the default context for command submission to 1 instead of 0,
verify basic desktop functionality including faulty command injection and
recovery.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-03-22 12:08:23 +01:00
Thomas Hellstrom
ef86cfee7d drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blits
This blit was previously performed using two large vmaps, one of which
was teared down and remapped on each blit. Use the more resource-
conserving TTM cpu blit instead.

The blit is used in boundary-box computing mode which makes it possible
to minimize the bounding box used in host operations.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22 12:08:23 +01:00
Thomas Hellstrom
79273e1b7e drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bos
The utility uses kmap_atomic() instead of vmapping the whole buffer
object. As a result there will be more book-keeping but on some
architectures this will help avoid exhausting vmalloc space and also
avoid expensive TLB flushes.

The blit utility also adds a provision to compute a bounding box of
changed content, which is very useful to optimize presentation speed
of ill-behaved applications that don't supply proper damage regions, and
for page-flips. The cost of computing the bounding box is not that
expensive when done in a cpu-blit utility like this.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22 12:08:23 +01:00
Thomas Hellstrom
9c11fcf1a7 drm/ttm: Export the ttm_k[un]map_atomic_prot API.
It will be used by vmwgfx cpu blit.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22 11:10:06 +01:00
Thomas Hellstrom
403c1826a4 drm/ttm: Clean up kmap_atomic_prot selection code
Use helpers to perform the kmap_atomic_prot() functionality to
a) Avoid in-function ifdefs that violate the kernel coding policy,
b) Facilitate exporting the functionality.

This commit should not change any functionality.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22 11:09:37 +01:00
Lucas Stach
4ed75c3e52 drm/etnaviv: bump HW job limit to 4
The current limit of 2 leads to some GPU idle times, as the usual
IRQ latency leads to up to 3 jobs getting signaled at once with some
standard workloads.

A larger HW job limit might lead to slightly worse QoS, but we accept
that to not sacrifice GPU throughput in the common case.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-03-22 11:08:48 +01:00
Thomas Hellstrom
25db875401 drm/vmwgfx: Cursor update fixes
Use drm_plane_helper_check_update also for the cursor plane.
Some applications, like gdm on gnome shell still uses cursor front-buffer
like rendering without notifying the kernel. We do need some kind of
noficiation, but work around this for now by updating the cursor image on
every cursor move.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22 10:58:23 +01:00
Deepak Rawat
904efd9e3f drm/vmwgfx: Send the correct nonblock option for atomic_commit
Page flip can be slow for vmwgfx in some cases, like need to do surface
copy to different surface or waiting for IN_FENCE_FD. Enabling
nonblocking commits for vmwgfx in case userspace request it.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22 10:57:52 +01:00
Deepak Rawat
ac3069e67f drm/vmwgfx: Move the stdu vblank event to atomic function
Atomic ioctl can also send the same page flip flags as legacy ioctl.
In those cases also need to send the vblank event to userspace.

vmwgfx does not support flag DRM_MODE_PAGE_FLIP_ASYNC, so this flag is
never expected.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22 10:57:28 +01:00
Deepak Rawat
aa64b3f18a drm/vmwgfx: Move screen object page flip to atomic function
The dmabuf_dirty/surface_dirty in case of screen object is moved to
plane atomic update, so that page flip in atomic ioctl also works.

vmwgfx does not support DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never
expected.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22 10:57:04 +01:00
Deepak Rawat
3cbe87fcf0 drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flush
The function drm_crtc_arm_vblank_event should be used for the driver
which have vblank interrupt support. In case of vmwgfx we do not have
vblank interrupt.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22 10:56:32 +01:00
Deepak Rawat
4e2f9fa7ff drm/vmwgfx: Move surface copy cmd to atomic function
When display surface is different than the framebuffer surface, atomic
path do not copy the surface data. This commit moved the code to copy
surface from legacy to atomic path.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22 10:55:56 +01:00
Deepak Rawat
91e9f352cd drm/vmwgfx: Avoid iterating over display unit if crtc is available
In case of page flip there is no need to iterate over all display unit
in the function "vmw_kms_helper_dirty". If crtc is available then
dirty commands is performed on that crtc only.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22 10:55:28 +01:00
Takashi Iwai
8e6b1a72a7 ALSA: aloop: Fix access to not-yet-ready substream via cable
In loopback_open() and loopback_close(), we assign and release the
substream object to the corresponding cable in a racy way.  It's
neither locked nor done in the right position.  The open callback
assigns the substream before its preparation finishes, hence the other
side of the cable may pick it up, which may lead to the invalid memory
access.

This patch addresses these: move the assignment to the end of the open
callback, and wrap with cable->lock for avoiding concurrent accesses.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22 10:40:27 +01:00
Takashi Iwai
67a01afaf3 ALSA: aloop: Sync stale timer before release
The aloop driver tries to stop the pending timer via timer_del() in
the trigger callback and in the close callback.  The former is
correct, as it's an atomic operation, while the latter expects that
the timer gets really removed and proceeds the resource releases after
that.  But timer_del() doesn't synchronize, hence the running timer
may still access the released resources.

A similar situation can be also seen in the prepare callback after
trigger(STOP) where the prepare tries to re-initialize the things
while a timer is still running.

The problems like the above are seen indirectly in some syzkaller
reports (although it's not 100% clear whether this is the only cause,
as the race condition is quite narrow and not always easy to
trigger).

For addressing these issues, this patch adds the explicit alls of
timer_del_sync() in some places, so that the pending timer is properly
killed / synced.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22 10:34:12 +01:00
Kailang Yang
88d42b2b45 ALSA: hda/realtek - Fix speaker no sound after system resume
It will have a chance speaker no sound after system resume.
To toggle NID 0x53 index 0x2 bit 15 will solve this issue.
This usage will also suitable with ALC256.

Fixes: 4a219ef8f3 ("ALSA: hda/realtek - Add ALC256 HP depop function")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22 09:43:28 +01:00
Kailang Yang
f0ba9d699e ALSA: hda/realtek - Fix Dell headset Mic can't record
This platform was hardware fixed type for CTIA type for headset port.
Assigned 0x19 verb will fix can't record issue.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22 09:07:30 +01:00
Greg Kroah-Hartman
3b82a4db8e drm: udl: Properly check framebuffer mmap offsets
The memmap options sent to the udl framebuffer driver were not being
checked for all sets of possible crazy values.  Fix this up by properly
bounding the allowed values.

Reported-by: Eyal Itkin <eyalit@checkpoint.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.com
2018-03-22 07:59:01 +01:00
Pierre-Yves MORDRET
3e4543bf20 dmaengine: stm32-dmamux: fix a potential buffer overflow
The bitfield dma_inuse is allocated of size dma_requests bits, thus a
valid bit address is from 0 to (dma_requests - 1).
When find_first_zero_bit() fails, it returns dma_requests as invalid
address.
Using such address for the following set_bit() is incorrect and, if
dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer
overflow.
Currently this driver is only used in DT stm32h743.dtsi where a safe value
dma_requests=16 is not triggering the buffer overflow.

Fixed by checking the return value of find_first_zero_bit() _before_
using it.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-22 10:51:35 +05:30
Alex Williamson
834814e802 Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"
This reverts commit 2170dd0431

The intent of commit 2170dd0431 ("vfio-pci: Mask INTx if a device is
not capabable of enabling it") was to disallow the user from seeing
that the device supports INTx if the platform is incapable of enabling
it.  The detection of this case however incorrectly includes devices
which natively do not support INTx, such as SR-IOV VFs, and further
discussions reveal gaps even for the target use case.

Reported-by: Arjun Vynipadath <arjun@chelsio.com>
Fixes: 2170dd0431 ("vfio-pci: Mask INTx if a device is not capabable of enabling it")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-21 22:50:19 -06:00
NeilBrown
a63d706ea7
MIPS: ralink: Fix booting on MT7621
Since commit 3af5a67c86 ("MIPS: Fix early CM probing") the MT7621 has
not been able to boot.

This commit caused mips_cm_probe() to be called before
mt7621.c::proc_soc_init().

prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out
the bootloader config" and means that configuration registers are no
longer available. It has some code to re-enable this config.

Before this re-enable code is run, the sysc register cannot be read, so
when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and
panic() is called.

If we move the config-repair code to the top of prom_soc_init(), the
registers can be read and boot can proceed.

Very occasionally, the first register read after the reconfiguration
returns garbage, so add a call to __sync().

Fixes: 3af5a67c86 ("MIPS: Fix early CM probing")
Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.5+
Patchwork: https://patchwork.linux-mips.org/patch/18859/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-22 00:06:30 +00:00
NeilBrown
891731f6a5
MIPS: ralink: Remove ralink_halt()
ralink_halt() does nothing that machine_halt() doesn't already do, so it
adds no value.

It actually causes incorrect behaviour due to the "unreachable()" at the
end. This tells the compiler that the end of the function will never be
reached, which isn't true. The compiler responds by not adding a
'return' instruction, so control simply moves on to whatever bytes come
afterwards in memory. In my tested, that was the ralink_restart()
function. This means that an attempt to 'halt' the machine would
actually cause a reboot.

So remove ralink_halt() so that a 'halt' really does halt.

Fixes: c06e836ada ("MIPS: ralink: adds reset code")
Signed-off-by: NeilBrown <neil@brown.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/18851/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-21 23:43:39 +00:00
Dave Airlie
82269df3bb Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
A few more fixes for 4.16.  Mostly for displays:
- A fix for DP handling on radeon
- Fix banding on eDP panels
- Fix HBR audio
- Fix for disabling VGA mode on Raven that leads to a corrupt or
  blank display on some platforms

* 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/display: Add one to EDID's audio channel count when passing to DC
  drm/amd/display: We shouldn't set format_default on plane as atomic driver
  drm/amd/display: Fix FMT truncation programming
  drm/amd/display: Allow truncation to 10 bits
  drm/amd/display: fix dereferencing possible ERR_PTR()
  drm/amd/display: Refine disable VGA
  drm/amdgpu: Use atomic function to disable crtcs with dc enabled
  drm/radeon: Don't turn off DP sink when disconnected
2018-03-22 08:52:21 +10:00
David S. Miller
ba9a190872 Merge branch 'net-sched-action-idr-leak'
Davide Caratti says:

====================
fix idr leak in actions

This series fixes situations where a temporary failure to install a TC
action results in the permanent impossibility to reuse the configured
value of 'index'.

Thanks to Cong Wang for the initial review.

v2: fix build error in act_ipt.c, reported by kbuild test robot
====================

Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:12:46 -04:00
Davide Caratti
f29cdfbe33 net/sched: fix idr leak in the error path of tcf_skbmod_init()
tcf_skbmod_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure skbmod rules
using the same idr value will systematically fail with -ENOSPC, unless
the first attempt was done using the 'replace' keyword:

 # tc action add action skbmod swap mac index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action add action skbmod swap mac index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc action add action skbmod swap mac index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in tcf_skbmod_init(), ensuring that tcf_idr_release() is called
on the error path when the idr has been reserved, but not yet inserted.
Also, don't test 'ovr' in the error path, to avoid a 'replace' failure
implicitly become a 'delete' that leaks refcount in act_skbmod module:

 # rmmod act_skbmod; modprobe act_skbmod
 # tc action add action skbmod swap mac index 100
 # tc action add action skbmod swap mac continue index 100
 RTNETLINK answers: File exists
 We have an error talking to the kernel
 # tc action replace action skbmod swap mac continue index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action list action skbmod
 #
 # rmmod  act_skbmod
 rmmod: ERROR: Module act_skbmod is in use

Fixes: 65a206c01e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:12:37 -04:00
Davide Caratti
d7f2001573 net/sched: fix idr leak in the error path of tcf_vlan_init()
tcf_vlan_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure vlan rules using
the same idr value will systematically fail with -ENOSPC, unless the first
attempt was done using the 'replace' keyword.

 # tc action add action vlan pop index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action add action vlan pop index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc action add action vlan pop index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in tcf_vlan_init(), ensuring that tcf_idr_release() is called on
the error path when the idr has been reserved, but not yet inserted. Also,
don't test 'ovr' in the error path, to avoid a 'replace' failure implicitly
become a 'delete' that leaks refcount in act_vlan module:

 # rmmod act_vlan; modprobe act_vlan
 # tc action add action vlan push id 5 index 100
 # tc action replace action vlan push id 7 index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action list action vlan
 #
 # rmmod act_vlan
 rmmod: ERROR: Module act_vlan is in use

Fixes: 4c5b9d9642 ("act_vlan: VLAN action rewrite to use RCU lock/unlock and update")
Fixes: 65a206c01e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:12:27 -04:00
Davide Caratti
1e46ef1762 net/sched: fix idr leak in the error path of __tcf_ipt_init()
__tcf_ipt_init() can fail after the idr has been successfully reserved.
When this happens, subsequent attempts to configure xt/ipt rules using
the same idr value systematically fail with -ENOSPC:

 # tc action add action xt -j LOG --log-prefix test1 index 100
 tablename: mangle hook: NF_IP_POST_ROUTING
         target:  LOG level warning prefix "test1" index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 Command "(null)" is unknown, try "tc actions help".
 # tc action add action xt -j LOG --log-prefix test1 index 100
 tablename: mangle hook: NF_IP_POST_ROUTING
         target:  LOG level warning prefix "test1" index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 Command "(null)" is unknown, try "tc actions help".
 # tc action add action xt -j LOG --log-prefix test1 index 100
 tablename: mangle hook: NF_IP_POST_ROUTING
         target:  LOG level warning prefix "test1" index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in the error path of __tcf_ipt_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup(). Since tcf_ipt_release() can now be called
when tcfi_t is NULL, we also need to protect calls to ipt_destroy_target()
to avoid NULL pointer dereference.

Fixes: 65a206c01e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:12:16 -04:00
Davide Caratti
94fa3f929e net/sched: fix idr leak in the error path of tcp_pedit_init()
tcf_pedit_init() can fail to allocate 'keys' after the idr has been
successfully reserved. When this happens, subsequent attempts to configure
a pedit rule using the same idr value systematically fail with -ENOSPC:

 # tc action add action pedit munge ip ttl set 63 index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action add action pedit munge ip ttl set 63 index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc action add action pedit munge ip ttl set 63 index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in the error path of tcf_act_pedit_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().

Fixes: 65a206c01e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:12:08 -04:00
Dan Williams
fe9a552e71 libnvdimm, nfit: fix persistence domain reporting
The persistence domain is a point in the platform where once writes
reach that destination the platform claims it will make them persistent
relative to power loss. In the ACPI NFIT this is currently communicated
as 2 bits in the "NFIT - Platform Capabilities Structure". The bits
comprise a hierarchy, i.e. bit0 "CPU Cache Flush to NVDIMM Durability on
Power Loss Capable" implies bit1 "Memory Controller Flush to NVDIMM
Durability on Power Loss Capable".

Commit 96c3a23905 "libnvdimm: expose platform persistence attr..."
shows the persistence domain as flags, but it's really an enumerated
hierarchy.

Fix this newly introduced user ABI to show the closest available
persistence domain before userspace develops dependencies on seeing, or
needing to develop code to tolerate, the raw NFIT flags communicated
through the libnvdimm-generic region attribute.

Fixes: 96c3a23905 ("libnvdimm: expose platform persistence attr...")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-21 15:12:07 -07:00
Davide Caratti
5bf7f8185f net/sched: fix idr leak in the error path of tcf_act_police_init()
tcf_act_police_init() can fail after the idr has been successfully
reserved (e.g., qdisc_get_rtab() may return NULL). When this happens,
subsequent attempts to configure a police rule using the same idr value
systematiclly fail with -ENOSPC:

 # tc action add action police rate 1000 burst 1000 drop index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action add action police rate 1000 burst 1000 drop index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc action add action police rate 1000 burst 1000 drop index 100
 RTNETLINK answers: No space left on device
 ...

Fix this in the error path of tcf_act_police_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().

Fixes: 65a206c01e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:12:00 -04:00
Davide Caratti
60e10b3adc net/sched: fix idr leak in the error path of tcf_simp_init()
if the kernel fails to duplicate 'sdata', creation of a new action fails
with -ENOMEM. However, subsequent attempts to install the same action
using the same value of 'index' systematically fail with -ENOSPC, and
that value of 'index' will no more be usable by act_simple, until rmmod /
insmod of act_simple.ko is done:

 # tc actions add action simple sdata hello index 100
 # tc actions list action simple

        action order 0: Simple <hello>
         index 100 ref 1 bind 0
 # tc actions flush action simple
 # tc actions add action simple sdata hello index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc actions flush action simple
 # tc actions add action simple sdata hello index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc actions add action simple sdata hello index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in the error path of tcf_simp_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup().

Fixes: 65a206c01e ("net/sched: Change act_api and act_xxx modules to use IDR")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:11:53 -04:00
Davide Caratti
bbc09e7842 net/sched: fix idr leak on the error path of tcf_bpf_init()
when the following command sequence is entered

 # tc action add action bpf bytecode '4,40 0 0 12,31 0 1 2048,6 0 0 262144,6 0 0 0' index 100
 RTNETLINK answers: Invalid argument
 We have an error talking to the kernel
 # tc action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel

act_bpf correctly refuses to install the first TC rule, because 31 is not
a valid instruction. However, it refuses to install the second TC rule,
even if the BPF code is correct. Furthermore, it's no more possible to
install any other rule having the same value of 'index' until act_bpf
module is unloaded/inserted again. After the idr has been reserved, call
tcf_idr_release() instead of tcf_idr_cleanup(), to fix this issue.

Fixes: 65a206c01e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:11:46 -04:00
Colin Ian King
3f2176dd7f qede: fix spelling mistake: "registeration" -> "registration"
Trivial fix to spelling mistakes in DP_ERR error message text and
comments

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:09:46 -04:00
Colin Ian King
924613d3a8 bnx2x: fix spelling mistake: "registeration" -> "registration"
Trivial fix to spelling mistake in BNX2X_ERR error message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 18:09:03 -04:00
Mathias Kresin
a821328c2f
MIPS: lantiq: ase: Enable MFD_SYSCON
Enable syscon to use it for the RCU MFD on Amazon SE as well.

The Amazon SE also has similar reset controller system as Danube and
XWAY and use their drivers mostly. As these drivers now need syscon also
activate the syscon subsystem for for Amazon SE.

Fixes: 2b6639d4c7 ("MIPS: lantiq: Enable MFD_SYSCON to be able to use it for the RCU MFD")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18817/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-21 21:57:35 +00:00
Mathias Kresin
3223a5a7d3
MIPS: lantiq: Enable AHB Bus for USB
On Danube and AR9 the USB core is connected though a AHB bus to the main
system cross bar, hence we need to enable the gating clock of the AHB
Bus as well to make the USB controller work.

Fixes: dea54fbad3 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18814/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-21 21:57:35 +00:00
Mathias Kresin
214cbc1473
MIPS: lantiq: Fix Danube USB clock
On Danube the USB0 controller registers are at 1e101000 and the USB0 PHY
register is at 1f203018 similar to all other lantiq SoCs. Activate the
USB controller gating clock thorough the USB controller driver and not
the PHY.

This fixes a problem introduced in a previous commit.

Fixes: dea54fbad3 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18816/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-21 21:57:29 +00:00
Dan Williams
896196dc4e libnvdimm, region: hide persistence_domain when unknown
Similar to other region attributes, do not emit the persistence_domain
attribute if its contents are empty.

Fixes: 96c3a23905 ("libnvdimm: expose platform persistence attr...")
Cc: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-21 14:06:23 -07:00
Andrey Grodzovsky
b6356df3eb drm/amdgpu: Fix NULL ptr on driver unload due to init failure.
Problem:
When unloading due to failure amdgpu_device_fini was called twice
which was leading to NULL ptr in amdgpu_irq_disable_all.

Fix:
Call amdgpu_device_fini only once from amdgpu_driver_unload_kms.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21 15:04:42 -05:00
Christian König
2333bf9ad9 drm/amdgpu: fix "mitigate workaround for i915"
Mixed up exporter and importer here. E.g. while mapping the BO we need
to check the importer not the exporter.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105633
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21 15:04:03 -05:00
Rex Zhu
3296c4ae97 drm/amd/pp: Add smu irq handlers in sw_init instand of hw_init
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21 14:36:59 -05:00
Rex Zhu
4d2003721c drm/amd/pp: Refine register_thermal_interrupt function
v2: add Vega12 support

1. delete useless argument in function register_thermal_interrupt
2. rename function name register_thermal_interrupt to register_irq_handlers

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21 14:36:58 -05:00
Rex Zhu
160b8e7593 drm/amdgpu: Remove wrapper layer of cgs irq handling
v2: add Vega12 support

1. remove struct cgs_os_ops
2. delete cgs_linux.h
3. refine the irq code for vega10, can fix set pp table
   failed issue.
4. add common smu irq process function

Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21 14:36:58 -05:00
Kenneth Feng
7436854ebd drm/amd/powerplay: Return per DPM level clock
Add change to return per DPM level clock in DAL interface

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21 14:36:58 -05:00
Kenneth Feng
7f3f106e44 drm/amd/powerplay: Remove the SOC floor voltage setting
Remove W/A carried over from VG10 to set VDDSOC Floor Voltage
prior to enabling DPM since the VBIOS covers the floor voltage
setting now

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21 14:36:57 -05:00