Fix for 4.14, zone device page always have an elevated refcount of one
and thus page count sanity check in uncharge_page() is inappropriate for
them.
[mhocko@suse.com: nano-optimize VM_BUG_ON in uncharge_page]
Link: http://lkml.kernel.org/r/20170914190011.5217-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Evgeny Baskakov <ebaskakov@nvidia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following lockdep splat has been noticed during LTP testing
======================================================
WARNING: possible circular locking dependency detected
4.13.0-rc3-next-20170807 #12 Not tainted
------------------------------------------------------
a.out/4771 is trying to acquire lock:
(cpu_hotplug_lock.rw_sem){++++++}, at: [<ffffffff812b4668>] drain_all_stock.part.35+0x18/0x140
but task is already holding lock:
(&mm->mmap_sem){++++++}, at: [<ffffffff8106eb35>] __do_page_fault+0x175/0x530
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&mm->mmap_sem){++++++}:
lock_acquire+0xc9/0x230
__might_fault+0x70/0xa0
_copy_to_user+0x23/0x70
filldir+0xa7/0x110
xfs_dir2_sf_getdents.isra.10+0x20c/0x2c0 [xfs]
xfs_readdir+0x1fa/0x2c0 [xfs]
xfs_file_readdir+0x30/0x40 [xfs]
iterate_dir+0x17a/0x1a0
SyS_getdents+0xb0/0x160
entry_SYSCALL_64_fastpath+0x1f/0xbe
-> #2 (&type->i_mutex_dir_key#3){++++++}:
lock_acquire+0xc9/0x230
down_read+0x51/0xb0
lookup_slow+0xde/0x210
walk_component+0x160/0x250
link_path_walk+0x1a6/0x610
path_openat+0xe4/0xd50
do_filp_open+0x91/0x100
file_open_name+0xf5/0x130
filp_open+0x33/0x50
kernel_read_file_from_path+0x39/0x80
_request_firmware+0x39f/0x880
request_firmware_direct+0x37/0x50
request_microcode_fw+0x64/0xe0
reload_store+0xf7/0x180
dev_attr_store+0x18/0x30
sysfs_kf_write+0x44/0x60
kernfs_fop_write+0x113/0x1a0
__vfs_write+0x37/0x170
vfs_write+0xc7/0x1c0
SyS_write+0x58/0xc0
do_syscall_64+0x6c/0x1f0
return_from_SYSCALL_64+0x0/0x7a
-> #1 (microcode_mutex){+.+.+.}:
lock_acquire+0xc9/0x230
__mutex_lock+0x88/0x960
mutex_lock_nested+0x1b/0x20
microcode_init+0xbb/0x208
do_one_initcall+0x51/0x1a9
kernel_init_freeable+0x208/0x2a7
kernel_init+0xe/0x104
ret_from_fork+0x2a/0x40
-> #0 (cpu_hotplug_lock.rw_sem){++++++}:
__lock_acquire+0x153c/0x1550
lock_acquire+0xc9/0x230
cpus_read_lock+0x4b/0x90
drain_all_stock.part.35+0x18/0x140
try_charge+0x3ab/0x6e0
mem_cgroup_try_charge+0x7f/0x2c0
shmem_getpage_gfp+0x25f/0x1050
shmem_fault+0x96/0x200
__do_fault+0x1e/0xa0
__handle_mm_fault+0x9c3/0xe00
handle_mm_fault+0x16e/0x380
__do_page_fault+0x24a/0x530
do_page_fault+0x30/0x80
page_fault+0x28/0x30
other info that might help us debug this:
Chain exists of:
cpu_hotplug_lock.rw_sem --> &type->i_mutex_dir_key#3 --> &mm->mmap_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(&type->i_mutex_dir_key#3);
lock(&mm->mmap_sem);
lock(cpu_hotplug_lock.rw_sem);
*** DEADLOCK ***
2 locks held by a.out/4771:
#0: (&mm->mmap_sem){++++++}, at: [<ffffffff8106eb35>] __do_page_fault+0x175/0x530
#1: (percpu_charge_mutex){+.+...}, at: [<ffffffff812b4c97>] try_charge+0x397/0x6e0
The problem is very similar to the one fixed by commit a459eeb7b8
("mm, page_alloc: do not depend on cpu hotplug locks inside the
allocator"). We are taking hotplug locks while we can be sitting on top
of basically arbitrary locks. This just calls for problems.
We can get rid of {get,put}_online_cpus, fortunately. We do not have to
be worried about races with memory hotplug because drain_local_stock,
which is called from both the WQ draining and the memory hotplug
contexts, is always operating on the local cpu stock with IRQs disabled.
The only thing to be careful about is that the target memcg doesn't
vanish while we are still in drain_all_stock so take a reference on it.
Link: http://lkml.kernel.org/r/20170913090023.28322-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Artem Savkov <asavkov@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea has noticed that the oom_reaper doesn't invalidate the range via
mmu notifiers (mmu_notifier_invalidate_range_start/end) and that can
corrupt the memory of the kvm guest for example.
tlb_flush_mmu_tlbonly already invokes mmu notifiers but that is not
sufficient as per Andrea:
"mmu_notifier_invalidate_range cannot be used in replacement of
mmu_notifier_invalidate_range_start/end. For KVM
mmu_notifier_invalidate_range is a noop and rightfully so. A MMU
notifier implementation has to implement either ->invalidate_range
method or the invalidate_range_start/end methods, not both. And if you
implement invalidate_range_start/end like KVM is forced to do, calling
mmu_notifier_invalidate_range in common code is a noop for KVM.
For those MMU notifiers that can get away only implementing
->invalidate_range, the ->invalidate_range is implicitly called by
mmu_notifier_invalidate_range_end(). And only those secondary MMUs
that share the same pagetable with the primary MMU (like AMD iommuv2)
can get away only implementing ->invalidate_range"
As the callback is allowed to sleep and the implementation is out of
hand of the MM it is safer to simply bail out if there is an mmu
notifier registered. In order to not fail too early make the
mm_has_notifiers check under the oom_lock and have a little nap before
failing to give the current oom victim some more time to exit.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170913113427.2291-1-mhocko@kernel.org
Fixes: aac4536355 ("mm, oom: introduce oom reaper")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible that on a (partially) unsuccessful page reclaim,
kref_put() called in z3fold_reclaim_page() does not yield page release,
but the page is released shortly afterwards by another thread. Then
z3fold_reclaim_page() would try to list_add() that (released) page again
which is obviously a bug.
To avoid that, spin_lock() has to be taken earlier, before the
kref_put() call mentioned earlier.
Link: http://lkml.kernel.org/r/20170913162937.bfff21c7d12b12a5f47639fd@gmail.com
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: <Oleksiy.Avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices. If enum
values are defined, but never used, pinmux_pins[] contains (zero-filled)
holes. Such entries are treated as pin zero, which was registered
before, thus leading to pinctrl registration failures, as seen on
sh7722:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
Remove GPIO_PH[0-7] from the enum to fix this.
Link: http://lkml.kernel.org/r/1505205657-18012-5-git-send-email-geert+renesas@glider.be
Fixes: ef0fa5331a ("sh: Add pinmux for sh7269")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices. If enum
values are defined, but never used, pinmux_pins[] contains (zero-filled)
holes. Such entries are treated as pin zero, which was registered
before, thus leading to pinctrl registration failures, as seen on
sh7722:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
Remove GPIO_PH[0-7] from the enum to fix this.
Link: http://lkml.kernel.org/r/1505205657-18012-4-git-send-email-geert+renesas@glider.be
Fixes: 41797f7548 ("sh: Add pinmux for sh7264")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3810e96056 ("sh: modify pinmux for SH7757 2nd cut") renamed
GPIO_PT[JLNQ]7 to GPIO_PT[JLNQ]7_RESV, and removed the existing users
from the pinmux_pins[] array.
However, pinmux_pins[] is initialized through PINMUX_GPIO(), using
designated array initializers, where the GPIO_* enums serve as indices.
Hence entries were not really removed, but replaced by (zero-filled)
holes. Such entries are treated as pin zero, which was registered
before, thus leading to pinctrl registration failures, as seen on
sh7722:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
Remove GPIO_PT[JLNQ]7_RESV from the enum to fix this.
Link: http://lkml.kernel.org/r/1505205657-18012-3-git-send-email-geert+renesas@glider.be
Fixes: 3810e96056 ("sh: modify pinmux for SH7757 2nd cut")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "sh: sh7722/sh7757i/sh7264/sh7269: Fix pinctrl registration",
v2.
Magnus Damm reported that on sh7722/Migo-R, pinctrl registration fails
with:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices. Apparently
GPIO_PTQ7 was defined in the enum, but never used. If enum values are
defined, but never used, pinmux_pins[] contains (zero-filled) holes.
Hence such entries are treated as pin zero, which was registered before,
and pinctrl registration fails.
I can't see how this ever worked, as at the time of commit f5e25ae52f
("sh-pfc: Add sh7722 pinmux support"), pinmux_gpios[] in
drivers/pinctrl/sh-pfc/pfc-sh7722.c already had the hole, and
drivers/pinctrl/core.c already had the check.
Some scripting revealed a few more broken drivers:
- sh7757 has four holes, due to nonexistent GPIO_PT[JLNQ]7_RESV.
- sh7264 and sh7269 define GPIO_PH[0-7], but don't use it with
PINMUX_GPIO().
Patch 1 fixes the issue on sh7722, and was tested. Patches 3-4 should
fix the issue on the other 3 SoCs, but was untested due to lack of
hardware.
This patch (of 4):
On sh7722/Migo-R, pinctrl registration fails with:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array
initializers, where the GPIO_* enums serve as indices. As GPIO_PTQ7 is
defined in the enum, but never used, pinmux_pins[] contains a
(zero-filled) hole. Hence this entry is treated as pin zero, which was
registered before, and pinctrl registration fails.
According to the datasheet, port PTQ7 does not exist. Hence remove
GPIO_PTQ7 from the enum to fix this.
Link: http://lkml.kernel.org/r/1505205657-18012-2-git-send-email-geert+renesas@glider.be
Fixes: 8d7b5b0af7 ("sh: Add sh7722 pinmux code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Magnus Damm <magnus.damm@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a bug in madvise() where if you'd try to soft offline a
hugepage via madvise(), while walking the address range you'd end up,
using the wrong page offset due to attempting to get the compound order
of a former but presently not compound page, due to dissolving the huge
page (since commit c3114a84f7: "mm: hugetlb: soft-offline: dissolve
source hugepage after successful migration").
As a result I ended up with all my free pages except one being offlined.
Link: http://lkml.kernel.org/r/20170912204306.GA12053@gmail.com
Fixes: c3114a84f7 ("mm: hugetlb: soft-offline: dissolve source hugepage after successful migration")
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In this place mm is unlocked, so vmas or list may change. Down read
mmap_sem to protect them from modifications.
Link: http://lkml.kernel.org/r/150512788393.10691.8868381099691121308.stgit@localhost.localdomain
Fixes: e86c59b1b1 ("mm/ksm: improve deduplication of zero pages with colouring")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's a typo in recent change of VM_MPX definition. We want it to be
VM_HIGH_ARCH_4, not VM_HIGH_ARCH_BIT_4.
This bug does cause visible regressions. In arch_vma_name the vmflags
are tested against VM_MPX. With the incorrect value of VM_MPX, a number
of vmas (such as the stack) test positive and end up being marked as
"[mpx]" in /proc/N/maps instead of their correct names.
This confuses tools like rr which expect to be able to find familiar
vmas.
Fixes: df3735c5b4 ("x86,mpx: make mpx depend on x86-64 to free up VMA flag")
Link: http://lkml.kernel.org/r/20170918140253.36856-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kyle Huey <me@kylehuey.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some of the more spelling mistakes and typos that I've found
while fixing up spelling mistakes in kernel error message text over the
past eight weeks.
[akpm@linux-foundation.org: s/|/||/, per Joe]
Link: http://lkml.kernel.org/r/20170919090818.5989-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This parameter is named kp, so the documentation should use that.
Fixes: 9b473de872 ("param: Fix duplicate module prefixes")
Link: http://lkml.kernel.org/r/20170919142656.64aea59e@endymion
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The build of alpha allmodconfig is giving error:
arch/alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
arch/alpha/include/asm/mmu_context.h:160:2: error:
implicit declaration of function 'task_thread_info';
did you mean 'init_thread_info'? [-Werror=implicit-function-declaration]
The file 'mmu_context.h' needed an extra header file.
Link: http://lkml.kernel.org/r/1505668810-7497-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- bpf prog_array just like all other types of bpf array accepts 32-bit index.
Clarify that in the comment.
- fix x64 JIT of bpf_tail_call which was incorrectly loading 8 instead of 4 bytes
- tighten corresponding check in the interpreter to stay consistent
The JIT bug can be triggered after introduction of BPF_F_NUMA_NODE flag
in commit 96eabe7a40 in 4.14. Before that the map_flags would stay zero and
though JIT code is wrong it will check bounds correctly.
Hence two fixes tags. All other JITs don't have this problem.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 96eabe7a40 ("bpf: Allow selecting numa node during map creation")
Fixes: b52f00e6a7 ("x86: bpf_jit: implement bpf_tail_call() helper")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add constants and callback functions for the dwmac on rk3128 soc.
As can be seen, the base structure is the same, only registers
and the bits in them moved slightly.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In blk_mq_debugfs_register(), I remembered to set up the per-hctx sched
directories if a default scheduler was already configured by
blk_mq_sched_init() from blk_mq_init_allocated_queue(), but I didn't do
the same for the device-wide sched directory. Fix it.
Fixes: d332ce0918 ("blk-mq-debugfs: allow schedulers to register debugfs attributes")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A recent commit made null_blk depend on configfs, which is kind of
annoying since you now have to find this dependency and enable that
as well. Discovered this since I no longer had null_blk available
on a box I needed to debug, since it got killed when the config
updated after the configfs change was merged.
Fixes: 3bf2bd2073 ("nullb: add configfs interface")
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a case which will lead to io stall. The case is described as
follows.
/test1
|-subtest1
/test2
|-subtest2
And subtest1 and subtest2 each has 32 queued bios already.
Now upgrade to max. In throtl_upgrade_state, it will try to dispatch
bios as follows:
1) tg=subtest1, do nothing;
2) tg=test1, transfer 32 queued bios from subtest1 to test1; no pending
left, no need to schedule next dispatch;
3) tg=subtest2, do nothing;
4) tg=test2, transfer 32 queued bios from subtest2 to test2; no pending
left, no need to schedule next dispatch;
5) tg=/, transfer 8 queued bios from test1 to /, 8 queued bios from
test2 to /, 8 queued bios from test1 to /, and 8 queued bios from test2
to /; note that test1 and test2 each still has 16 queued bios left;
6) tg=/, try to schedule next dispatch, but since disptime is now
(update in tg_update_disptime, wait=0), pending timer is not scheduled
in fact;
7) In throtl_upgrade_state it totally dispatches 32 queued bios and with
32 left. test1 and test2 each has 16 queued bios;
8) throtl_pending_timer_fn sees the left over bios, but could do
nothing, because throtl_select_dispatch returns 0, and test1/test2 has
no pending tg.
The blktrace shows the following:
8,32 0 0 2.539007641 0 m N throtl upgrade to max
8,32 0 0 2.539072267 0 m N throtl /test2 dispatch nr_queued=16 read=0 write=16
8,32 7 0 2.539077142 0 m N throtl /test1 dispatch nr_queued=16 read=0 write=16
So force schedule dispatch if there are pending children.
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Joseph Qi <qijiang.qj@alibaba-inc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Treat the ef/04/01 interface class/subclass/protocol combination used
by the Novatel Verizon USB730L (1410:9030) as a possible RNDIS
interface.
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 3
P: Vendor=1410 ProdID=9030 Rev=03.10
S: Manufacturer=Novatel Wireless
S: Product=MiFi USB730L
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
Once the network interface is brought up, the user just needs to run a
DHCP client to get IP address and routing setup.
As a side note, other Novatel Verizon USB730L models with the same
vid:pid end up exposing a standard ECM interface which doesn't require
any other kernel update to make it work.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.
This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Fixes: e93da0a013 ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com
(cherry picked from commit e19c1eb885)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We used to assign IRQs for all devices at boot-time, before any drivers
claimed devices. The following commits:
30fdfb929e ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
0e4c2eeb75 ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
changed this so we now call pci_assign_irq() from pci_device_probe() when
we call a driver's probe method.
The ide_scan_pcibus() path (enabled by CONFIG_IDEPCI_PCIBUS_ORDER) bypasses
pci_device_probe() so it can guarantee devices are claimed in order of PCI
bus address. It calls the driver's probe method directly, so it misses the
pci_assign_irq() call (and other PCI initialization functions), which
causes failures like this:
ide0: disabled, no IRQ
ide0: failed to initialize IDE interface
ide0: disabling port
cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
cmd64x 0000:00:02.0: can't reserve resources
CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
sysfs: cannot create duplicate filename '/class/ide_port/ide0'
...
Trace:
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
[<fffffc00005b9d64>] device_add+0x2a4/0x7c0
[<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
[<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
[<fffffc00005ba690>] device_create+0x50/0x70
[<fffffc00005df36c>] ide_host_register+0x48c/0xa00
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005ba2a0>] device_register+0x20/0x50
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005df944>] ide_host_add+0x64/0xe0
[<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
[<fffffc0000310288>] do_one_initcall+0x68/0x260
[<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
...
---[ end trace 24a70433c3e4d374 ]---
ide0: disabling port
Fix the IRQ allocation issue by calling pci_assign_irq() from
ide_scan_pcidev() before probing the IDE PCI drivers, so that IRQs for a
given PCI device are allocated for the IDE PCI drivers to use them for
device configuration.
Fixes: 30fdfb929e ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb75 ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Recent pci_assign_irq() changes uncovered a problem with missing freeing of
PCI BARs on PCI IDE host initialization failure:
ide0: disabled, no IRQ
ide0: failed to initialize IDE interface
ide0: disabling port
cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
cmd64x 0000:00:02.0: can't reserve resources
CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
Fix the problem by adding missing freeing of PCI BARs to
ide_setup_pci_controller() and ide_pci_init_two().
Fixes: 30fdfb929e ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb75 ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[bhelgaas: add Fixes:]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
nbd-general@sourceforge.net becomes nbd@other.debian.org, because
sourceforge is just a spamtrap these days.
Signed-off-by: Wouter Verhelst <w@uter.be>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull cgroup fix from Tejun Heo:
"The recent migration code updates assumed that migrations always
execute from the top to the bottom once and didn't clean up internal
states after each migration round; however, cgroup_transfer_tasks()
repeats the inner steps multiple times and the garbage internal states
from the previous iteration led to OOPS.
Waiman fixed the bug by reinitializing the relevant states at the end
of each migration round"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Reinit cgroup_taskset structure before cgroup_migrate_execute() returns
When RTM_GETSTATS was added the fields of its header struct were not all
initialized when returning the result thus leaking 4 bytes of information
to user-space per rtnl_fill_statsinfo call, so initialize them now. Thanks
to Alexander Potapenko for the detailed report and bisection.
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: 10c9ead9f3 ("rtnetlink: add new RTM_GETSTATS message to dump link stats")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull percpu fixes from Tejun Heo:
"Rather important fixes this time.
- The new percpu area allocator had a subtle bug in how it iterates
the memory regions and could skip viable areas, which led to
allocation failures for module static percpu variables. Dennis
fixed the bug and another non-critical one in stat calculation.
- Mark noticed that the generic implementations of percpu local
atomic reads aren't properly protected against irqs and there's a
(slim) chance for split reads on some 32bit systems. Generic
implementations are updated to disable irq when read size is larger
than ulong size. This may have made some 32bit archs which can do
atomic local 64bit accesses generate sub-optimal code. We need to
find them out and implement arch-specific overrides"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: fix iteration to prevent skipping over block
percpu: fix starting offset for chunk statistics traversal
percpu: make this_cpu_generic_read() atomic w.r.t. interrupts
Pull libata fixes from Tejun Heo:
"Nothing too interesting.
Arnd's gcc-7 warning fixes that slipped through the cracks for two
release cycles (my bad), and two minor low level driver updates"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: don't ignore result code of ahci_reset_controller()
ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs
ata: avoid gcc-7 warning in ata_timing_quantize
Here are a number of USB fixes for 4.14-rc4 to resolved reported issue.
There's a bunch of stuff in here based on the great work Andrey
Konovalov is doing in fuzzing the USB stack. Lots of bug fixes when
dealing with corrupted USB descriptors that we've never seen in "normal"
operation, but is now ensuring the stack is much more hardened overall.
There's also the usual XHCI and gadget driver fixes as well, and a build
error fix, and a few other minor things, full details in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWdN/yw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl6pQCdGY+nPJhzj9EIeFj5QUpSuS4b1pYAoKrbNn+V
CMpg4iG1oXUtVL8jBbKa
=fVpl
-----END PGP SIGNATURE-----
Merge tag 'usb-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 4.14-rc4 to resolved reported
issues.
There's a bunch of stuff in here based on the great work Andrey
Konovalov is doing in fuzzing the USB stack. Lots of bug fixes when
dealing with corrupted USB descriptors that we've never seen in
"normal" operation, but is now ensuring the stack is much more
hardened overall.
There's also the usual XHCI and gadget driver fixes as well, and a
build error fix, and a few other minor things, full details in the
shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (38 commits)
usb: dwc3: of-simple: Add compatible for Spreadtrum SC9860 platform
usb: gadget: udc: atmel: set vbus irqflags explicitly
usb: gadget: ffs: handle I/O completion in-order
usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction
usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe
usb: gadget: udc: renesas_usb3: Fix return value of usb3_write_pipe()
usb: gadget: udc: renesas_usb3: fix Pn_RAMMAP.Pn_MPKT value
usb: gadget: udc: renesas_usb3: fix for no-data control transfer
USB: dummy-hcd: Fix erroneous synchronization change
USB: dummy-hcd: fix infinite-loop resubmission bug
USB: dummy-hcd: fix connection failures (wrong speed)
USB: cdc-wdm: ignore -EPIPE from GetEncapsulatedResponse
USB: devio: Don't corrupt user memory
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: g_mass_storage: Fix deadlock when driver is unbound
USB: gadgetfs: Fix crash caused by inadequate synchronization
USB: gadgetfs: fix copy_to_user while holding spinlock
USB: uas: fix bug in handling of alternate settings
usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives
usb-storage: fix bogus hardware error messages for ATA pass-thru devices
...
Here are a small number (5) of patches for some reported TTY and serial
issues. Nothing major, a documentation update, timing fix, error
handling fix, name reporting fix, and a timeout issue resolved.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWdN+uw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykZmgCbBSJmwcbVhuhZ64Fx4OE0eprjOgoAoMLmHaT2
jTjQTxM/Gaz108t3o9rt
=5ve+
-----END PGP SIGNATURE-----
Merge tag 'tty-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a small number (5) of patches for some reported TTY and
serial issues. Nothing major, a documentation update, timing fix,
error handling fix, name reporting fix, and a timeout issue resolved.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sccnxp: Fix error handling in sccnxp_probe()
tty: serial: lpuart: avoid report NULL interrupt
serial: bcm63xx: fix timing issue.
mxser: fix timeout calculation for low rates
serial: sh-sci: document R8A77970 bindings
Here are some small staging/IIO driver fixes for 4.14-rc4
Most of these have been in my tree for a while due to travels, sorry for
the delay. They resolve a number of small issues reported by people,
mostly for the iio drivers. Nothing major in here, full details are in
the shortlog.
All have been linux-next for a few weeks with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWdN+KQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yluygCgneh7i/okOfsmt/p75eCA4ClWVLwAoIE7BZzt
1WdBcY/Zxv1ANIoY7ZTQ
=K+FX
-----END PGP SIGNATURE-----
Merge tag 'staging-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are some small staging/IIO driver fixes for 4.14-rc4
Most of these have been in my tree for a while due to travels, sorry
for the delay. They resolve a number of small issues reported by
people, mostly for the iio drivers. Nothing major in here, full
details are in the shortlog.
All have been linux-next for a few weeks with no reported issues"
* tag 'staging-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack.
iio: core: Return error for failed read_reg
iio: ad7793: Fix the serial interface reset
iio: ad_sigma_delta: Implement a dedicated reset function
IIO: BME280: Updates to Humidity readings need ctrl_reg write!
iio: adc: mcp320x: Fix readout of negative voltages
iio: adc: mcp320x: Fix oops on module unload
iio: adc: stm32: fix bad error check on max_channels
iio: trigger: stm32-timer: fix a corner case to write preset
iio: trigger: stm32-timer: preset shouldn't be buffered
iio: adc: twl4030: Return an error if we can not enable the vusb3v1 regulator in 'twl4030_madc_probe()'
iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
staging: rtl8723bs: avoid null pointer dereference on pmlmepriv
staging: rtl8723bs: add missing range check on id
staging: vchiq_2835_arm: Fix NULL ptr dereference in free_pagelist
staging: speakup: fix speakup-r empty line lockup
staging: pi433: Move limit check to switch default to kill warning
staging: r8822be: fix null pointer dereferences with a null driver_adapter
staging: mt29f_spinand: Enable the read ECC before program the page
...
In KVM's XICS-on-XIVE emulation, kvmppc_xive_get_xive() returns the
value of state->guest_server as "server". However, this value is not
set by it's counterpart kvmppc_xive_set_xive(). When the guest uses
this interface to migrate interrupts away from a CPU that is going
offline, it sees all interrupts as belonging to CPU 0, so they are
left assigned to (now) offline CPUs.
This patch removes the guest_server field from the state, and returns
act_server in it's place (that is, the CPU actually handling the
interrupt, which may differ from the one requested).
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Here are a few small fixes for 4.14-rc4.
The removal of DRIVER_ATTR() was almost completed by 4.14-rc1, but one
straggler made it in through some other tree (odds are, one of mine...)
So there's a simple removal of the last user, and then finally the macro
is removed from the tree.
There's a fix for old crazy udev instances that insist on reloading a
module when it is removed from the kernel due to the new uevents for
bind/unbind. This fixes the reported regression, hopefully some year in
the future we can drop the workaround, once users update to the latest
version, but I'm not holding my breath.
And then there's a build fix for a linker warning, and a buffer overflow
fix to match the PCI fixes you took through the PCI tree in the same
area.
All of these have been in linux-next for a few weeks while I've been
traveling, sorry for the delay.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWdN8qA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymLEgCfUSSBhxW04teEcPua4QygLv2omK0An2SRkpnY
28nn+D+AfeOByQImY8v+
=RQY+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are a few small fixes for 4.14-rc4.
The removal of DRIVER_ATTR() was almost completed by 4.14-rc1, but one
straggler made it in through some other tree (odds are, one of
mine...) So there's a simple removal of the last user, and then
finally the macro is removed from the tree.
There's a fix for old crazy udev instances that insist on reloading a
module when it is removed from the kernel due to the new uevents for
bind/unbind. This fixes the reported regression, hopefully some year
in the future we can drop the workaround, once users update to the
latest version, but I'm not holding my breath.
And then there's a build fix for a linker warning, and a buffer
overflow fix to match the PCI fixes you took through the PCI tree in
the same area.
All of these have been in linux-next for a few weeks while I've been
traveling, sorry for the delay"
* tag 'driver-core-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: remove DRIVER_ATTR
fpga: altera-cvp: remove DRIVER_ATTR() usage
driver core: platform: Don't read past the end of "driver_override" buffer
base: arch_topology: fix section mismatch build warnings
driver core: suppress sending MODALIAS in UNBIND uevents
Here are a handful of char/misc driver fixes for 4.14-rc4.
Nothing major, some binder fixups, hyperv fixes, and other tiny things.
All of these have been sitting in my tree for way too long, sorry for
the delay in getting them to you. All have been in linux-next for a few
weeks, and despite some people's feeling about if linux-next actually
tests things, I think it's a good "soak test" for patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWdN4YA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yluhQCgmL0xgVGvO5uXNNwY+PsWdp7cELYAoNmGxVoP
AKnvi1ZeDNSu1+O3+j6Q
=wjBg
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are a handful of char/misc driver fixes for 4.14-rc4.
Nothing major, some binder fixups, hyperv fixes, and other tiny
things.
All of these have been sitting in my tree for way too long, sorry for
the delay in getting them to you. All have been in linux-next for a
few weeks, and despite some people's feeling about if linux-next
actually tests things, I think it's a good "soak test" for patches"
* tag 'char-misc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: fcopy: restore correct transfer length
vmbus: don't acquire the mutex in vmbus_hvsock_device_unregister()
intel_th: pci: Add Lewisburg PCH support
intel_th: pci: Add Cedar Fork PCH support
stm class: Fix a use-after-free
nvmem: add missing of_node_put() in of_nvmem_cell_get()
nvmem: core: return EFBIG on out-of-range write
auxdisplay: charlcd: properly restore atomic counter on error path
binder: fix memory corruption in binder_transaction binder
binder: fix an ret value override
android: binder: fix type mismatch warning
The read of ->dynticks_nmi_nesting in rcu_irq_enter() and rcu_irq_exit()
is currently protected with READ_ONCE(). However, this protection is
unnecessary because (1) ->dynticks_nmi_nesting is updated only by the
current CPU, (2) Although NMI handlers can update this field, they reset
it back to its old value before return, and (3) Interrupts are disabled,
so nothing else can modify it. The value of ->dynticks_nmi_nesting is
thus effectively constant, and so no protection is required.
This commit therefore removes the READ_ONCE() protection from these
two accesses.
Link: http://lkml.kernel.org/r/20170926031902.GA2074@linux.vnet.ibm.com
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The trampoline allocated by function tracer was overwriten by function_graph
tracer, and caused a memory leak. The save_global_trampoline should have
saved the previous trampoline in register_ftrace_graph() and restored it in
unregister_ftrace_graph(). But as it is implemented, save_global_trampoline was
only used in unregister_ftrace_graph as default value 0, and it overwrote the
previous trampoline's value. Causing the previous allocated trampoline to be
lost.
kmmeleak backtrace:
kmemleak_vmalloc+0x77/0xc0
__vmalloc_node_range+0x1b5/0x2c0
module_alloc+0x7c/0xd0
arch_ftrace_update_trampoline+0xb5/0x290
ftrace_startup+0x78/0x210
register_ftrace_function+0x8b/0xd0
function_trace_init+0x4f/0x80
tracing_set_tracer+0xe6/0x170
tracing_set_trace_write+0x90/0xd0
__vfs_write+0x37/0x170
vfs_write+0xb2/0x1b0
SyS_write+0x55/0xc0
do_syscall_64+0x67/0x180
return_from_SYSCALL_64+0x0/0x6a
[
Looking further into this, I found that this was left over from when the
function and function graph tracers shared the same ftrace_ops. But in
commit 5f151b2401 ("ftrace: Fix function_profiler and function tracer
together"), the two were separated, and the save_global_trampoline no
longer was necessary (and it may have been broken back then too).
-- Steven Rostedt
]
Link: http://lkml.kernel.org/r/20170912021454.5976-1-shuwang@redhat.com
Cc: stable@vger.kernel.org
Fixes: 5f151b2401 ("ftrace: Fix function_profiler and function tracer together")
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The mmu context on the 40x, 44x does not define pte_frag entry. This
causes gcc abort the compilation due to:
setup-common.c: In function ‘setup_arch’:
setup-common.c:908: error: ‘mm_context_t’ has no ‘pte_frag’
This patch fixes the issue by removing the pte_frag initialization in
setup-common.c.
This is possible, because the compiler will do the initialization,
since the mm_context is a sub struct of init_mm. init_mm is declared
in mm_types.h as external linkage.
According to C99 6.2.4.3:
An object whose identifier is declared with external linkage
[...] has static storage duration.
C99 defines in 6.7.8.10 that:
If an object that has static storage duration is not
initialized explicitly, then:
- if it has pointer type, it is initialized to a null pointer
Fixes: b1923caa6e ("powerpc: Merge 32-bit and 64-bit setup_arch()")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 41d0c2ecde ("powerpc/powernv: Fix local TLB flush for boot
and MCE on POWER9") introduced calls to __flush_tlb_power[89] from the
cpufeatures code, specifying the number of sets to flush.
However, these functions take an action argument, not a number of
sets. This means we hit the BUG() in __flush_tlb_{206,300} when using
cpufeatures-style configuration.
This change passes TLB_INVAL_SCOPE_GLOBAL instead.
Fixes: 41d0c2ecde ("powerpc/powernv: Fix local TLB flush for boot and MCE on POWER9")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For write_pending if the queue is down or client failed then return -EIO
so that LIO can properly process the completed command. Prior we
returned 0 since LIO could not handle it properly. Now with commit
fa7e25cf13 ("target: Fix unknown fabric callback queue-full errors")
that patch addresses LIO's ability to handle things right.
Signed-off-by: Bryant G. Ly <bgly@us.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsi_session_teardown was the only user of this function. Function
currently is just short for iscsi_remove_session + iscsi_free_session.
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Session attributes exposed through sysfs were freed before the device
was destroyed, resulting in a potential use-after-free. Free these
attributes after removing the device.
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A user may lower the max_sectors_kb setting in sysfs to accommodate
certain workloads. Previously we would always set the max I/O size to
either the block layer default or the optional preferred I/O size
reported by the device.
Keep the current heuristics for the initial setting of max_sectors_kb.
For subsequent invocations, only update the current queue limit if it
exceeds the capabilities of the hardware.
Cc: <stable@vger.kernel.org>
Reported-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SBC-4 states:
"A MAXIMUM UNMAP LBA COUNT field set to a non-zero value indicates the
maximum number of LBAs that may be unmapped by an UNMAP command"
"A MAXIMUM WRITE SAME LENGTH field set to a non-zero value indicates
the maximum number of contiguous logical blocks that the device server
allows to be unmapped or written in a single WRITE SAME command."
Despite the spec being clear on the topic, some devices incorrectly
expect WRITE SAME commands with the UNMAP bit set to be limited to the
value reported in MAXIMUM UNMAP LBA COUNT in the Block Limits VPD.
Implement a blacklist option that can be used to accommodate devices
with this behavior.
Cc: <stable@vger.kernel.org>
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Reported-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drm/i915 fixes for 4.14-rc3
Couple fixes for stable:
- Fix ELD connector types and consequently audio on DP (Jani).
- Ignore HDMI on Port A and consequently fix an ops on i915 probe
when VBT advertises HDMI on Port A (Jani).
And a small fix:
- That removes a reduntant hw_check on modeset. (Colin)
* tag 'drm-intel-fixes-2017-09-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915/bios: ignore HDMI on port A
drm/i915: remove redundant variable hw_check
drm/i915: always update ELD connector type after get modes
Starting from linux-4.4, 3WHS no longer takes the listener lock.
Since this time, we might hit a use-after-free in sk_filter_charge(),
if the filter we got in the memcpy() of the listener content
just happened to be replaced by a thread changing listener BPF filter.
To fix this, we need to make sure the filter refcount is not already
zero before incrementing it again.
Fixes: e994b2f0fb ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph made it so that if we return'ed BLK_STS_RESOURCE whenever we
got ERESTARTSYS from sending our packets we'd return BLK_STS_OK, which
means we'd never requeue and just hang. We really need to return the
right value from the upper layer.
Fixes: fc17b6534e ("blk-mq: switch ->queue_rq return value to blk_status_t")
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.
Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.
Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170929082306.16193-6-wens@csie.org
ahci_pci_reset_controller() calls ahci_reset_controller(), which may
fail, but ignores the result code and always returns success. This
may result in failures like below
ahci 0000:02:00.0: version 3.0
ahci 0000:02:00.0: enabling device (0000 -> 0003)
ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.0: controller reset failed (0xffffffff)
ahci 0000:02:00.0: failed to stop engine (-5)
... repeated many times ...
ahci 0000:02:00.0: failed to stop engine (-5)
Unable to handle kernel paging request at virtual address ffff0000093f9018
...
PC is at ahci_stop_engine+0x5c/0xd8 [libahci]
LR is at ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci]
...
[<ffff000000a17014>] ahci_stop_engine+0x5c/0xd8 [libahci]
[<ffff000000a196b4>] ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci]
[<ffff000000a197d8>] ahci_init_controller+0x80/0x168 [libahci]
[<ffff000000a260f8>] ahci_pci_init_controller+0x60/0x68 [ahci]
[<ffff000000a26f94>] ahci_init_one+0x75c/0xd88 [ahci]
[<ffff000008430324>] local_pci_probe+0x3c/0xb8
[<ffff000008431728>] pci_device_probe+0x138/0x170
[<ffff000008585e54>] driver_probe_device+0x2dc/0x458
[<ffff0000085860e4>] __driver_attach+0x114/0x118
[<ffff000008583ca8>] bus_for_each_dev+0x60/0xa0
[<ffff000008585638>] driver_attach+0x20/0x28
[<ffff0000085850b0>] bus_add_driver+0x1f0/0x2a8
[<ffff000008586ae0>] driver_register+0x60/0xf8
[<ffff00000842f9b4>] __pci_register_driver+0x3c/0x48
[<ffff000000a3001c>] ahci_pci_driver_init+0x1c/0x1000 [ahci]
[<ffff000008083918>] do_one_initcall+0x38/0x120
where an obvious hardware level failure results in an unnecessary 15 second
delay and a subsequent crash.
So record the result code of ahci_reset_controller() and relay it, rather
than ignoring it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
