Since commit 7ecaf069da ("kbuild: move headers_check rule to
usr/include/Makefile"), 'make headers_check' is no-op.
This stub target is remaining here in case some scripts still invoke it.
In order to prompt people to remove stale code, show a noisy warning
message if used. The stub will be really removed after the Linux 5.15
release.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit f2f02ebd8f ("kbuild: improve cc-option to clean up all
temporary files"), running 'make kernelversion' in a read-only source
tree emits a bunch of warnings:
mkdir: cannot create directory '.tmp_12345': Permission denied
No-build targets such as kernelversion, clean, help, etc. do not
need to evaluate $(call cc-option,) or friends. Skip Makefile.compiler
so $(call cc-option,) becomes no-op.
This not only fixes the warnings, but also runs non-build targets much
faster.
Basically, all installation targets should also be non-build targets.
Unfortunately, vdso_install requires the compiler because it builds
vdso before installation. This is a problem that must be fixed by a
separate patch.
Reported-by: Israel Tsadok <itsadok@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/Kbuild.include is included everywhere, but macros such as
cc-option are needed by build targets only.
For example, when 'make clean' traverses the tree, it does not need
to evaluate $(call cc-option,).
Split cc-option, ld-option, etc. to scripts/Makefile.compiler, which
is only included from the top Makefile and scripts/Makefile.build.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When the .config file is missing, 'make config', 'make menuconfig', etc.
uses a file listed in DEFCONFIG_LIST, if found, as base configuration.
Ususally, /boot/config-$(uname -r) exists, and is used as default.
However, when you are cross-compiling the kernel, it does not make
sense to use /boot/config-* on the build host. It should default to
arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG).
UML previously did not use DEFCONFIG_LIST at all, but it should be
able to use arch/um/configs/$(KBUILD_DEFCONFIG) as a base config file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is a partial revert of commit 2a86f66121 ("kbuild: use
KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST").
Now that the reference to $(DEFCONFIG_LIST) was removed from
init/Kconfig, the default KBUILD_DEFCONFIG can go back home.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The "mrproper" target is still looking for build time generated keys in
the kernel root directory instead of certs directory. Fix the path and
remove the names of the files which are no longer generated.
Fixes: cfc411e7ff ("Move certificate handling to its own directory")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This change adds support for Clang’s forward-edge Control Flow
Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler
injects a runtime check before each indirect function call to ensure
the target is a valid function with the correct static type. This
restricts possible call targets and makes it more difficult for
an attacker to exploit bugs that allow the modification of stored
function pointers. For more details, see:
https://clang.llvm.org/docs/ControlFlowIntegrity.html
Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain
visibility to possible call targets. Kernel modules are supported
with Clang’s cross-DSO CFI mode, which allows checking between
independently compiled components.
With CFI enabled, the compiler injects a __cfi_check() function into
the kernel and each module for validating local call targets. For
cross-module calls that cannot be validated locally, the compiler
calls the global __cfi_slowpath_diag() function, which determines
the target module and calls the correct __cfi_check() function. This
patch includes a slowpath implementation that uses __module_address()
to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a
shadow map that speeds up module look-ups by ~3x.
Clang implements indirect call checking using jump tables and
offers two methods of generating them. With canonical jump tables,
the compiler renames each address-taken function to <function>.cfi
and points the original symbol to a jump table entry, which passes
__cfi_check() validation. This isn’t compatible with stand-alone
assembly code, which the compiler doesn’t instrument, and would
result in indirect calls to assembly code to fail. Therefore, we
default to using non-canonical jump tables instead, where the compiler
generates a local jump table entry <function>.cfi_jt for each
address-taken function, and replaces all references to the function
with the address of the jump table entry.
Note that because non-canonical jump table addresses are local
to each component, they break cross-module function address
equality. Specifically, the address of a global function will be
different in each module, as it's replaced with the address of a local
jump table entry. If this address is passed to a different module,
it won’t match the address of the same function taken there. This
may break code that relies on comparing addresses passed from other
components.
CFI checking can be disabled in a function with the __nocfi attribute.
Additionally, CFI can be disabled for an entire compilation unit by
filtering out CC_FLAGS_CFI.
By default, CFI failures result in a kernel panic to stop a potential
exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the
kernel prints out a rate-limited warning instead, and allows execution
to continue. This option is helpful for locating type mismatches, but
should only be enabled during development.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com
This provides the ability for architectures to enable kernel stack base
address offset randomization. This feature is controlled by the boot
param "randomize_kstack_offset=on/off", with its default value set by
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT.
This feature is based on the original idea from the last public release
of PaX's RANDKSTACK feature: https://pax.grsecurity.net/docs/randkstack.txt
All the credit for the original idea goes to the PaX team. Note that
the design and implementation of this upstream randomize_kstack_offset
feature differs greatly from the RANDKSTACK feature (see below).
Reasoning for the feature:
This feature aims to make harder the various stack-based attacks that
rely on deterministic stack structure. We have had many such attacks in
past (just to name few):
https://jon.oberheide.org/files/infiltrate12-thestackisback.pdfhttps://jon.oberheide.org/files/stackjacking-infiltrate11.pdfhttps://googleprojectzero.blogspot.com/2016/06/exploiting-recursion-in-linux-kernel_20.html
As Linux kernel stack protections have been constantly improving
(vmap-based stack allocation with guard pages, removal of thread_info,
STACKLEAK), attackers have had to find new ways for their exploits
to work. They have done so, continuing to rely on the kernel's stack
determinism, in situations where VMAP_STACK and THREAD_INFO_IN_TASK_STRUCT
were not relevant. For example, the following recent attacks would have
been hampered if the stack offset was non-deterministic between syscalls:
https://repositorio-aberto.up.pt/bitstream/10216/125357/2/374717.pdf
(page 70: targeting the pt_regs copy with linear stack overflow)
https://a13xp0p0v.github.io/2020/02/15/CVE-2019-18683.html
(leaked stack address from one syscall as a target during next syscall)
The main idea is that since the stack offset is randomized on each system
call, it is harder for an attack to reliably land in any particular place
on the thread stack, even with address exposures, as the stack base will
change on the next syscall. Also, since randomization is performed after
placing pt_regs, the ptrace-based approach[1] to discover the randomized
offset during a long-running syscall should not be possible.
Design description:
During most of the kernel's execution, it runs on the "thread stack",
which is pretty deterministic in its structure: it is fixed in size,
and on every entry from userspace to kernel on a syscall the thread
stack starts construction from an address fetched from the per-cpu
cpu_current_top_of_stack variable. The first element to be pushed to the
thread stack is the pt_regs struct that stores all required CPU registers
and syscall parameters. Finally the specific syscall function is called,
with the stack being used as the kernel executes the resulting request.
The goal of randomize_kstack_offset feature is to add a random offset
after the pt_regs has been pushed to the stack and before the rest of the
thread stack is used during the syscall processing, and to change it every
time a process issues a syscall. The source of randomness is currently
architecture-defined (but x86 is using the low byte of rdtsc()). Future
improvements for different entropy sources is possible, but out of scope
for this patch. Further more, to add more unpredictability, new offsets
are chosen at the end of syscalls (the timing of which should be less
easy to measure from userspace than at syscall entry time), and stored
in a per-CPU variable, so that the life of the value does not stay
explicitly tied to a single task.
As suggested by Andy Lutomirski, the offset is added using alloca()
and an empty asm() statement with an output constraint, since it avoids
changes to assembly syscall entry code, to the unwinder, and provides
correct stack alignment as defined by the compiler.
In order to make this available by default with zero performance impact
for those that don't want it, it is boot-time selectable with static
branches. This way, if the overhead is not wanted, it can just be
left turned off with no performance impact.
The generated assembly for x86_64 with GCC looks like this:
...
ffffffff81003977: 65 8b 05 02 ea 00 7f mov %gs:0x7f00ea02(%rip),%eax
# 12380 <kstack_offset>
ffffffff8100397e: 25 ff 03 00 00 and $0x3ff,%eax
ffffffff81003983: 48 83 c0 0f add $0xf,%rax
ffffffff81003987: 25 f8 07 00 00 and $0x7f8,%eax
ffffffff8100398c: 48 29 c4 sub %rax,%rsp
ffffffff8100398f: 48 8d 44 24 0f lea 0xf(%rsp),%rax
ffffffff81003994: 48 83 e0 f0 and $0xfffffffffffffff0,%rax
...
As a result of the above stack alignment, this patch introduces about
5 bits of randomness after pt_regs is spilled to the thread stack on
x86_64, and 6 bits on x86_32 (since its has 1 fewer bit required for
stack alignment). The amount of entropy could be adjusted based on how
much of the stack space we wish to trade for security.
My measure of syscall performance overhead (on x86_64):
lmbench: /usr/lib/lmbench/bin/x86_64-linux-gnu/lat_syscall -N 10000 null
randomize_kstack_offset=y Simple syscall: 0.7082 microseconds
randomize_kstack_offset=n Simple syscall: 0.7016 microseconds
So, roughly 0.9% overhead growth for a no-op syscall, which is very
manageable. And for people that don't want this, it's off by default.
There are two gotchas with using the alloca() trick. First,
compilers that have Stack Clash protection (-fstack-clash-protection)
enabled by default (e.g. Ubuntu[3]) add pagesize stack probes to
any dynamic stack allocations. While the randomization offset is
always less than a page, the resulting assembly would still contain
(unreachable!) probing routines, bloating the resulting assembly. To
avoid this, -fno-stack-clash-protection is unconditionally added to
the kernel Makefile since this is the only dynamic stack allocation in
the kernel (now that VLAs have been removed) and it is provably safe
from Stack Clash style attacks.
The second gotcha with alloca() is a negative interaction with
-fstack-protector*, in that it sees the alloca() as an array allocation,
which triggers the unconditional addition of the stack canary function
pre/post-amble which slows down syscalls regardless of the static
branch. In order to avoid adding this unneeded check and its associated
performance impact, architectures need to carefully remove uses of
-fstack-protector-strong (or -fstack-protector) in the compilation units
that use the add_random_kstack() macro and to audit the resulting stack
mitigation coverage (to make sure no desired coverage disappears). No
change is visible for this on x86 because the stack protector is already
unconditionally disabled for the compilation unit, but the change is
required on arm64. There is, unfortunately, no attribute that can be
used to disable stack protector for specific functions.
Comparison to PaX RANDKSTACK feature:
The RANDKSTACK feature randomizes the location of the stack start
(cpu_current_top_of_stack), i.e. including the location of pt_regs
structure itself on the stack. Initially this patch followed the same
approach, but during the recent discussions[2], it has been determined
to be of a little value since, if ptrace functionality is available for
an attacker, they can use PTRACE_PEEKUSR/PTRACE_POKEUSR to read/write
different offsets in the pt_regs struct, observe the cache behavior of
the pt_regs accesses, and figure out the random stack offset. Another
difference is that the random offset is stored in a per-cpu variable,
rather than having it be per-thread. As a result, these implementations
differ a fair bit in their implementation details and results, though
obviously the intent is similar.
[1] https://lore.kernel.org/kernel-hardening/2236FBA76BA1254E88B949DDB74E612BA4BC57C1@IRSMSX102.ger.corp.intel.com/
[2] https://lore.kernel.org/kernel-hardening/20190329081358.30497-1-elena.reshetova@intel.com/
[3] https://lists.ubuntu.com/archives/ubuntu-devel/2019-June/040741.html
Co-developed-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210401232347.2791257-4-keescook@chromium.org
VPATH is used in Kbuild to make pattern rules search for prerequisites
in both $(objtree) and $(srctree). Some of *.c, *.S files are not real
sources, but generated by tools such as flex, bison, perl.
In contrast, I doubt the benefit of --include-dir=$(abs_srctree) because
it is always clear which Makefiles are real sources, and which are not.
So, my hope is to add $(srctree)/ prefix to all check-in Makefiles,
then remove --include-dir=$(abs_srctree) flag in the future.
I am touching only some Kbuild core parts for now. Treewide fixes will
be needed to achieve this goal.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus reported a build error due to the GCC plugin incompatibility
when the compiler is upgraded. [1]
GCC plugins are tied to a particular GCC version. So, they must be
rebuilt when the compiler is upgraded.
This seems to be a long-standing flaw since the initial support of
GCC plugins.
Extend commit 8b59cd81dc ("kbuild: ensure full rebuild when the
compiler is updated"), so that GCC plugins are covered by the
compiler upgrade detection.
[1]: https://lore.kernel.org/lkml/CAHk-=wieoN5ttOy7SnsGwZv+Fni3R6m-Ut=oxih6bbZ28G+4dw@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
'make image_name' needs include/config/auto.conf to show the correct
output because KBUILD_IMAGE depends on CONFIG options, but should not
attempt to resync the configuration.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 78d3bb4483 ("kbuild: Fix <linux/version.h> for empty SUBLEVEL
or PATCHLEVEL") fixed the build error for empty SUBLEVEL or PATCHLEVEL
by prepending a zero.
Commit 9b82f13e7e ("kbuild: clamp SUBLEVEL to 255") re-introduced
this issue.
This time, we cannot take the same approach because we have C code:
#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL)
#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL)
Replace empty SUBLEVEL/PATCHLEVEL with a zero.
Fixes: 9b82f13e7e ("kbuild: clamp SUBLEVEL to 255")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-and-tested-by: Sasha Levin <sashal@kernel.org>
'make -s' should be really silent. However, 'make -s V=1' prints noisy
log messages from some shell scripts.
Of course, such a combination is odd, but the build system needs to do
the right thing even if a user gives strange input.
If -s is given, KBUILD_VERBOSE should be forced to 0.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Instead of 'make distclean', 'make clean' should remove build artifacts
unneeded by external module builds. Obviously, you do not need to keep
this directory.
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210225193912.3303604-1-masahiroy@kernel.org
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
-----BEGIN PGP SIGNATURE-----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=sLxb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
kbuild: remove deprecated 'always' and 'hostprogs-y/m'
kbuild: parse C= and M= before changing the working directory
kbuild: reuse this-makefile to define abs_srctree
kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
kconfig: omit --oldaskconfig option for 'make config'
kconfig: fix 'invalid option' for help option
kconfig: remove dead code in conf_askvalue()
kconfig: clean up nested if-conditionals in check_conf()
kconfig: Remove duplicate call to sym_get_string_value()
Makefile: Remove # characters from compiler string
Makefile: reuse CC_VERSION_TEXT
kbuild: check the minimum linker version in Kconfig
kbuild: remove ld-version macro
scripts: add generic syscallhdr.sh
scripts: add generic syscalltbl.sh
arch: syscalls: remove $(srctree)/ prefix from syscall tables
arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
gen_compile_commands: prune some directories
kbuild: simplify access to the kernel's version
...
If Kbuild recurses to the top Makefile (for example, 'make deb-pkg'),
C= and M= are parsed over again, needlessly.
Parse them before changing the working directory. After that,
sub_make_done is set to 1, so they are parsed just once.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When using AMD's Optimizing C/C++ Compiler (AOCC), the build fails due
to a # character in the version string, which is interpreted as a
comment:
$ make CC=clang defconfig init/main.o
include/config/auto.conf.cmd:1374: *** invalid syntax in conditional. Stop.
$ sed -n 1374p include/config/auto.conf.cmd
ifneq "$(CC_VERSION_TEXT)" "AMD clang version 11.0.0 (CLANG: AOCC_2.3.0-Build#85 2020_11_10) (based on LLVM Mirror.Version.11.0.0)"
Remove all # characters in the version string so that the build does not
fail unexpectedly.
Link: https://github.com/ClangBuiltLinux/linux/issues/1298
Reported-by: Michael Fuckner <michael@fuckner.net>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I noticed we're invoking $(CC) via $(shell) more than once to check the
version. Let's reuse the first string captured in $CC_VERSION_TEXT.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[masahiro.yamada:
CC_VERSION_TEXT is assigned by = instead of :=, so this $(shell ) is
evaluated multiple times anyway. The number of $(CC) invocations will
be still the same. Replacing 'grep' with the built-in $(findstring )
will give real performance benefit.]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Generate __mcount_loc in objtool (Peter Zijlstra)
- Support running objtool against vmlinux.o (Sami Tolvanen)
- Clang LTO enablement for x86 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=htKJ
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more clang LTO updates from Kees Cook:
"Clang LTO x86 enablement.
Full disclosure: while this has _not_ been in linux-next (since it
initially looked like the objtool dependencies weren't going to make
v5.12), it has been under daily build and runtime testing by Sami for
quite some time. These x86 portions have been discussed on lkml, with
Peter, Josh, and others helping nail things down.
The bulk of the changes are to get objtool working happily. The rest
of the x86 enablement is very small.
Summary:
- Generate __mcount_loc in objtool (Peter Zijlstra)
- Support running objtool against vmlinux.o (Sami Tolvanen)
- Clang LTO enablement for x86 (Sami Tolvanen)"
Link: https://lore.kernel.org/lkml/20201013003203.4168817-26-samitolvanen@google.com/
Link: https://lore.kernel.org/lkml/cover.1611263461.git.jpoimboe@redhat.com/
* tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: lto: force rebuilds when switching CONFIG_LTO
x86, build: allow LTO to be selected
x86, cpu: disable LTO for cpu.c
x86, vdso: disable LTO only for vDSO
kbuild: lto: postpone objtool
objtool: Split noinstr validation from --vmlinux
x86, build: use objtool mcount
tracing: add support for objtool mcount
objtool: Don't autodetect vmlinux.o
objtool: Fix __mcount_loc generation with Clang's assembler
objtool: Add a pass for generating __mcount_loc
When doing non-clean builds and switching between CONFIG_LTO=n and
CONFIG_LTO=y, the build system (correctly) didn't notice that assembly
and LTO-excluded C object files were rewritten in place by objtool (to
add the .orc_unwind* sections), since their build command lines were the
same between CONFIG_LTO=y and CONFIG_LTO=n. The objtool step would fail:
vmlinux.o: warning: objtool: file already has .orc_unwind section, skipping
make: *** [Makefile:1194: vmlinux] Error 255
Avoid this by making sure the build will see a difference between an LTO
and non-LTO build (by including "-fno-lto" in KBUILD_*FLAGS). This will
get ignored when CC_FLAGS_LTO is present, and will not be included at
all when CONFIG_LTO=n.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
- Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)
-----BEGIN PGP SIGNATURE-----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=6peY
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit dc5723b02e
("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
build:
make LLVM=1 LLVM_IAS=1 defconfig
scripts/config -e LTO_CLANG_THIN
make LLVM=1 LLVM_IAS=1
(To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
and "ARCH=arm64" to the "make" command lines.)
Summary:
- Clang LTO build infrastructure and arm64-specific enablement (Sami
Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"
* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
arm64: allow LTO to be selected
arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
arm64: vdso: disable LTO
drivers/misc/lkdtm: disable LTO for rodata.o
efi/libstub: disable LTO
scripts/mod: disable LTO for empty.c
modpost: lto: strip .lto from module names
PCI: Fix PREL32 relocations for LTO
init: lto: fix PREL32 relocations
init: lto: ensure initcall ordering
kbuild: lto: add a default list of used symbols
kbuild: lto: merge module sections
kbuild: lto: limit inlining
kbuild: lto: fix module versioning
kbuild: add support for Clang LTO
tracing: move function tracer options to Kconfig
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build
host fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device(). In preparation for
this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
-----BEGIN PGP SIGNATURE-----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=9V4A
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
Pull networking updates from David Miller:
"Here is what we have this merge window:
1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik.
2) Add RSS multi group support to octeontx2-pf driver, from Geetha
Sowjanya.
3) Add support for KS8851 PHY. From Marek Vasut.
4) Add support for GarfieldPeak bluetooth controller from Kiran K.
5) Add support for half-duplex tcan4x5x can controllers.
6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw
Liew.
7) Rework RX port offload infrastructure, particularly wrt, UDP
tunneling, from Jakub Kicinski.
8) Add BCM72116 PHY support, from Florian Fainelli.
9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir
Oltean.
10) Add support for picosecond rx delay in dwmac-meson8b chips. From
Martin Blumenstingl.
11) Support TSO on xfrm interfaces from Eyal Birger.
12) Add support for MP_PRIO to mptcp stack, from Geliang Tang.
13) Support BCM4908 integrated switch, from Rafał Miłecki.
14) Support for directly accessing kernel module variables via module
BTF info, from Andrii Naryiko.
15) Add DASH (esktop and mobile Architecture for System Hardware)
support to r8169 driver, from Heiner Kallweit.
16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron.
17) Add support for 100 base0x SFP devices, from Bjarni Jonasson.
18) Support link aggregation in DSA, from Tobias Waldekranz.
19) Support for bitwidse atomics in bpf, from Brendan Jackman.
20) SmartEEE support in at803x driver, from Russell King.
21) Add support for flow based tunneling to GTP, from Pravin B Shelar.
22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder.
23) TLS RX offload for bonding, from Tariq Toukan.
24) RX decap offklload support in mac80211, from Felix Fietkou.
25) devlink health saupport in octeontx2-af, from George Cherian.
26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung
27) Delegated actionss support in mptcp, from Paolo Abeni.
28) Support receive timestamping when doin zerocopy tcp receive. From
Arjun Ray.
29) HTB offload support for mlx5, from Maxim Mikityanskiy.
30) UDP GRO forwarding, from Maxim Mikityanskiy.
31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach.
32) Weighted random twos choice algorithm for ipvs, from Darby Payne.
33) Fix netdev registration deadlock, from Johannes Berg.
34) Various conversions to new tasklet api, from EmilRenner Berthing.
35) Bulk skb allocations in veth, from Lorenzo Bianconi.
36) New ethtool interface for lane setting, from Danielle Ratson.
37) Offload failiure notifications for routes, from Amit Cohen.
38) BCM4908 support, from Rafał Miłecki.
39) Support several new iwlwifi chips, from Ihab Zhaika.
40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski.
41) Support for mhi prrotocols, from Loic Poulain.
42) Optimize bpf program stats.
43) Implement RFC6056, for better port randomization, from Eric
Dumazet.
44) hsr tag offloading support from George McCollister.
45) Netpoll support in qede, from Bhaskar Upadhaya.
46) 2005/400g speed support in bonding 3ad mode, from Nikolay
Aleksandrov.
47) Netlink event support in mptcp, from Florian Westphal.
48) Better skbuff caching, from Alexander Lobakin.
49) MRP (Media Redundancy Protocol) offloading in DSA and a few
drivers, from Horatiu Vultur.
50) mqprio saupport in mvneta, from Maxime Chevallier.
51) Remove of_phy_attach, no longer needed, from Florian Fainelli"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits)
octeontx2-pf: Fix otx2_get_fecparam()
cteontx2-pf: cn10k: Prevent harmless double shift bugs
net: stmmac: Add PCI bus info to ethtool driver query output
ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary
ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.
ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.
ptp: ptp_clockmatrix: Clean-up dev_*() messages.
ptp: ptp_clockmatrix: Remove unused header declarations.
ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.
ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.
net: stmmac: dwmac-sun8i: Add a shutdown callback
net: stmmac: dwmac-sun8i: Minor probe function cleanup
net: stmmac: dwmac-sun8i: Use reset_control_reset
net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check
net: stmmac: dwmac-sun8i: Return void from PHY unpower
r8169: use macro pm_ptr
net: mdio: Remove of_phy_attach()
net: mscc: ocelot: select PACKING in the Kconfig
net: re-solve some conflicts after net -> net-next merge
net: dsa: tag_rtl4_a: Support also egress tags
...
CC_FLAGS_LTO gets initialized only via +=, never with := or =.
When building with CONFIG_TRIM_UNUSED_KSYMS, Kbuild may perform
several kernel rebuilds to satisfy symbol dependencies. In this
case, value of CC_FLAGS_LTO is concatenated each time, which
triggers a full rebuild.
Initialize it with := to fix this.
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210121184544.659998-1-alobakin@pm.me
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-02-16
The following pull-request contains BPF updates for your *net-next* tree.
There's a small merge conflict between 7eeba1706e ("tcp: Add receive timestamp
support for receive zerocopy.") from net-next tree and 9cacf81f81 ("bpf: Remove
extra lock_sock for TCP_ZEROCOPY_RECEIVE") from bpf-next tree. Resolve as follows:
[...]
lock_sock(sk);
err = tcp_zerocopy_receive(sk, &zc, &tss);
err = BPF_CGROUP_RUN_PROG_GETSOCKOPT_KERN(sk, level, optname,
&zc, &len, err);
release_sock(sk);
[...]
We've added 116 non-merge commits during the last 27 day(s) which contain
a total of 156 files changed, 5662 insertions(+), 1489 deletions(-).
The main changes are:
1) Adds support of pointers to types with known size among global function
args to overcome the limit on max # of allowed args, from Dmitrii Banshchikov.
2) Add bpf_iter for task_vma which can be used to generate information similar
to /proc/pid/maps, from Song Liu.
3) Enable bpf_{g,s}etsockopt() from all sock_addr related program hooks. Allow
rewriting bind user ports from BPF side below the ip_unprivileged_port_start
range, both from Stanislav Fomichev.
4) Prevent recursion on fentry/fexit & sleepable programs and allow map-in-map
as well as per-cpu maps for the latter, from Alexei Starovoitov.
5) Add selftest script to run BPF CI locally. Also enable BPF ringbuffer
for sleepable programs, both from KP Singh.
6) Extend verifier to enable variable offset read/write access to the BPF
program stack, from Andrei Matei.
7) Improve tc & XDP MTU handling and add a new bpf_check_mtu() helper to
query device MTU from programs, from Jesper Dangaard Brouer.
8) Allow bpf_get_socket_cookie() helper also be called from [sleepable] BPF
tracing programs, from Florent Revest.
9) Extend x86 JIT to pad JMPs with NOPs for helping image to converge when
otherwise too many passes are required, from Gary Lin.
10) Verifier fixes on atomics with BPF_FETCH as well as function-by-function
verification both related to zero-extension handling, from Ilya Leoshkevich.
11) Better kernel build integration of resolve_btfids tool, from Jiri Olsa.
12) Batch of AF_XDP selftest cleanups and small performance improvement
for libbpf's xsk map redirect for newer kernels, from Björn Töpel.
13) Follow-up BPF doc and verifier improvements around atomics with
BPF_FETCH, from Brendan Jackman.
14) Permit zero-sized data sections e.g. if ELF .rodata section contains
read-only data from local variables, from Yonghong Song.
15) veth driver skb bulk-allocation for ndo_xdp_xmit, from Lorenzo Bianconi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of storing the version in a single integer and having various
kernel (and userspace) code how it's constructed, export individual
(major, patchlevel, sublevel) components and simplify kernel code that
uses it.
This should also make it easier on userspace.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Right now if SUBLEVEL becomes larger than 255 it will overflow into the
territory of PATCHLEVEL, causing havoc in userspace that tests for
specific kernel version.
While userspace code tests for MAJOR and PATCHLEVEL, it doesn't test
SUBLEVEL at any point as ABI changes don't happen in the context of
stable tree.
Thus, to avoid overflows, simply clamp SUBLEVEL to it's maximum value in
the context of LINUX_VERSION_CODE. This does not affect "make
kernelversion" and such.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
DWARF v5 is the latest standard of the DWARF debug info format. GCC 11
will change the implicit default DWARF version, if left unspecified, to
DWARF v5.
Allow users of Clang and older versions of GCC that have not changed the
implicit default DWARF version to DWARF v5 to opt in. This can help
testing consumers of DWARF debug info in preparation of v5 becoming more
widespread, as well as result in significant binary size savings of the
pre-stripped vmlinux image.
DWARF5 wins significantly in terms of size when mixed with compression
(CONFIG_DEBUG_INFO_COMPRESSED).
363M vmlinux.clang12.dwarf5.compressed
434M vmlinux.clang12.dwarf4.compressed
439M vmlinux.clang12.dwarf2.compressed
457M vmlinux.clang12.dwarf5
536M vmlinux.clang12.dwarf4
548M vmlinux.clang12.dwarf2
515M vmlinux.gcc10.2.dwarf5.compressed
599M vmlinux.gcc10.2.dwarf4.compressed
624M vmlinux.gcc10.2.dwarf2.compressed
630M vmlinux.gcc10.2.dwarf5
765M vmlinux.gcc10.2.dwarf4
809M vmlinux.gcc10.2.dwarf2
Though the quality of debug info is harder to quantify; size is not a
proxy for quality.
Jakub notes:
One thing is GCC DWARF-5 support, that is whether the compiler will
support -gdwarf-5 flag, and that support should be there from GCC 7
onwards.
All [GCC] 5.1 - 6.x did was start accepting -gdwarf-5 as experimental
option that enabled some small DWARF subset (initially only a few
DW_LANG_* codes newly added to DWARF5 drafts). Only GCC 7 (released
after DWARF 5 has been finalized) started emitting DWARF5 section
headers and got most of the DWARF5 changes in...
Another separate thing is whether the assembler does support
the -gdwarf-5 option (i.e. if you can compile assembler files
with -Wa,-gdwarf-5) ... That option is about whether the assembler
will emit DWARF5 or DWARF2 .debug_line. It is fine to compile C sources
with -gdwarf-5 and use DWARF2 .debug_line for assembler files if as
doesn't support it.
Version check GCC so that we don't need to worry about the difference in
command line args between GNU readelf and llvm-readelf/llvm-dwarfdump to
validate the DWARF Version in the assembler feature detection script.
Most issues with clang produced assembler were fixed in binutils 2.35.1,
but 2.35.2 fixed issues related to requiring the flag -Wa,-gdwarf-5
explicitly. The added shell script test checks for the latter, and is
only required when using clang without its integrated assembler, though
we use for clang regardless as we do not yet have a way to query the
assembler from Kconfig.
Disabled for now if CONFIG_DEBUG_INFO_BTF is set; pahole doesn't yet
recognize the new additions to the DWARF debug info.
This only modifies the DWARF version emitted by the compiler, not the
assembler.
The DWARF version of a binary can be validated with:
$ llvm-dwarfdump <object file> | head -n 4 | grep version
or
$ readelf --debug-dump=info <object file> 2>/dev/null | grep Version
Parts of the tree don't reuse DEBUG_CFLAGS as they should; such cleanup
is left as a follow up.
Link: http://www.dwarfstd.org/doc/DWARF5.pdf
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1922707
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Caroline Tice <cmtice@google.com>
Suggested-by: Fangrui Song <maskray@google.com>
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc1 x86-64
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Adds a default CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT which allows
the implicit default version of DWARF emitted by the toolchain to
progress over time.
Modifies CONFIG_DEBUG_INFO_DWARF4 to be a member of a choice, making it
mutually exclusive with CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT. Users
may want to select this if they are using a newer toolchain, but have
consumers of the DWARF debug info that aren't yet ready for newer DWARF
versions' debug info.
Does so in a way that's forward compatible with existing
configs, and makes adding future versions more straightforward. This
patch does not change the current behavior or selection of DWARF
version for users upgrading to kernels with this patch.
GCC since ~4.8 has defaulted to DWARF v4 implicitly, and GCC 11 has
bumped this to v5.
Remove the Kconfig help text about DWARF v4 being larger. It's
empirically false for the latest toolchains for x86_64 defconfig, has no
point of reference (I suspect it was DWARF v2 but that's stil
empirically false), and debug info size is not a qualatative measure.
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Fangrui Song <maskray@google.com>
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Suggested-by: Mark Wielaard <mark@klomp.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Revert commit 223c24a7db ("kbuild: Automatically remove stale
<linux/version.h> file").
It was more than 6 years ago. I do not expect anybody to start
git-bisect for such a big window.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
By default, xz without parameters uses a dictionary size of 8 MB.
However, most modules are much smaller than that.
The xz manpage states that 'increasing dictionary size usually improves
compression ratio, but a dictionary bigger than the uncompressed file
is waste of memory'.
Use a dictionary size of 2 MB for module compression, resulting in
slightly higher compression speed while still maintaining a good
compression ratio.
Signed-off-by: Tor Vic <torvic9@mailbox.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Nathan reported issue with cleaning empty build directory:
$ make -s O=build distclean
../../scripts/Makefile.include:4: *** \
O=/ho...build/tools/bpf/resolve_btfids does not exist. Stop.
The problem that tools scripts require existing output
directory, otherwise it fails.
Adding check around the resolve_btfids clean target to
ensure the output directory is in place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/bpf/20210211124004.1144344-1-jolsa@kernel.org
The resolve_btfids tool is used during the kernel build,
so we should clean it on kernel's make clean.
Invoking the the resolve_btfids clean as part of root
'make clean'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210205124020.683286-5-jolsa@kernel.org
with certain kernel configs and LLVM.
- Disable setting breakpoints on facilities involved in #DB exception handling
to avoid infinite loops.
- Add extra serialization to non-serializing MSRs (IA32_TSC_DEADLINE and
x2 APIC MSRs) to adhere to SDM's recommendation and avoid any theoretical
issues.
- Re-add the EPB MSR reading on turbostat so that it works on older
kernels which don't have the corresponding EPB sysfs file.
- Add Alder Lake to the list of CPUs which support split lock.
- Fix %dr6 register handling in order to be able to set watchpoints with gdb
again.
- Disable CET instrumentation in the kernel so that gcc doesn't add
ENDBR64 to kernel code and thus confuse tracing.
-----BEGIN PGP SIGNATURE-----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=XwH4
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"I hope this is the last batch of x86/urgent updates for this round:
- Remove superfluous EFI PGD range checks which lead to those
assertions failing with certain kernel configs and LLVM.
- Disable setting breakpoints on facilities involved in #DB exception
handling to avoid infinite loops.
- Add extra serialization to non-serializing MSRs (IA32_TSC_DEADLINE
and x2 APIC MSRs) to adhere to SDM's recommendation and avoid any
theoretical issues.
- Re-add the EPB MSR reading on turbostat so that it works on older
kernels which don't have the corresponding EPB sysfs file.
- Add Alder Lake to the list of CPUs which support split lock.
- Fix %dr6 register handling in order to be able to set watchpoints
with gdb again.
- Disable CET instrumentation in the kernel so that gcc doesn't add
ENDBR64 to kernel code and thus confuse tracing"
* tag 'x86_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Remove EFI PGD build time checks
x86/debug: Prevent data breakpoints on cpu_dr7
x86/debug: Prevent data breakpoints on __per_cpu_offset
x86/apic: Add extra serialization for non-serializing MSRs
tools/power/turbostat: Fallback to an MSR read for EPB
x86/split_lock: Enable the split lock feature on another Alder Lake CPU
x86/debug: Fix DR6 handling
x86/build: Disable CET instrumentation in the kernel
- Use the 'python3' command to invoke python scripts because some
distributions do not provide the 'python' command any more.
- Clean-up and update documents
- Use pkg-config to search libcrypto
- Fix duplicated debug flags
- Ignore some more stubs in scripts/kallsyms.c
-----BEGIN PGP SIGNATURE-----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=DI2e
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use the 'python3' command to invoke python scripts because some
distributions do not provide the 'python' command any more.
- Clean-up and update documents
- Use pkg-config to search libcrypto
- Fix duplicated debug flags
- Ignore some more stubs in scripts/kallsyms.c
* tag 'kbuild-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kallsyms: fix nonconverging kallsyms table with lld
kbuild: fix duplicated flags in DEBUG_CFLAGS
scripts/clang-tools: switch explicitly to Python 3
kbuild: remove PYTHON variable
Documentation/llvm: Add a section about supported architectures
Revert "checkpatch: add check for keyword 'boolean' in Kconfig definitions"
scripts: use pkg-config to locate libcrypto
kconfig: mconf: fix HOSTCC call
doc: gcc-plugins: update gcc-plugins.rst
kbuild: simplify GCC_PLUGINS enablement in dummy-tools/gcc
Documentation/Kbuild: Remove references to gcc-plugin.sh
scripts: switch explicitly to Python 3
Sedat Dilek noticed duplicated flags in DEBUG_CFLAGS when building
deb-pkg with CONFIG_DEBUG_INFO. For example, 'make CC=clang bindeb-pkg'
reproduces the issue.
Kbuild recurses to the top Makefile for some targets such as package
builds.
With commit 121c5d08d5 ("kbuild: Only add -fno-var-tracking-assignments
for old GCC versions") applied, DEBUG_CFLAGS is now reset only when
CONFIG_CC_IS_GCC=y.
Fix it to reset DEBUG_CFLAGS all the time.
Fixes: 121c5d08d5 ("kbuild: Only add -fno-var-tracking-assignments for old GCC versions")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Mark Wielaard <mark@klomp.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Add support for building DT overlays (%.dtbo). The overlay's source file
will have the usual extension, i.e. .dts, though the blob will have
.dtbo extension to distinguish it from normal blobs.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/434ba2467dd0cd011565625aeb3450650afe0aae.1611904394.git.viresh.kumar@linaro.org
Python retired in 2020, and some distributions do not provide the
'python' command any more.
As in commit 51839e29cb ("scripts: switch explicitly to Python 3"),
we need to use more specific 'python3' to invoke scripts even if they
are written in a way compatible with both Python 2 and 3.
This commit removes the variable 'PYTHON', and switches the existing
users to 'PYTHON3'.
BTW, PEP 394 (https://www.python.org/dev/peps/pep-0394/) is a helpful
material.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
With retpolines disabled, some configurations of GCC, and specifically
the GCC versions 9 and 10 in Ubuntu will add Intel CET instrumentation
to the kernel by default. That breaks certain tracing scenarios by
adding a superfluous ENDBR64 instruction before the fentry call, for
functions which can be called indirectly.
CET instrumentation isn't currently necessary in the kernel, as CET is
only supported in user space. Disable it unconditionally and move it
into the x86's Makefile as CET/CFI... enablement should be a per-arch
decision anyway.
[ bp: Massage and extend commit message. ]
Fixes: 29be86d7f9 ("kbuild: add -fcf-protection=none when using retpoline flags")
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Cc: <stable@vger.kernel.org>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lkml.kernel.org/r/20210128215219.6kct3h2eiustncws@treble
drivers/net/can/dev.c
b552766c87 ("can: dev: prevent potential information leak in can_fill_info()")
3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
0a042c6ec9 ("can: dev: move netlink related code into seperate file")
Code move.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
57ac4a31c4 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down")
214baf2287 ("net/mlx5e: Support HTB offload")
Adjacent code changes
net/switchdev/switchdev.c
20776b465c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP")
ffb68fc58e ("net: switchdev: remove the transaction structure from port object notifiers")
bae33f2b5a ("net: switchdev: remove the transaction structure from port attributes")
Transaction parameter gets dropped otherwise keep the fix.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_NET is disabled, nothing under the net/ directory is
compiled. Move the CONFIG_NET guard to the top Makefile so the net/
directory is entirely skipped.
When Kbuild visits net/Makefile, CONFIG_NET is obvioulsy 'y' because
CONFIG_NET is a bool option. Clean up net/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change limits function inlining across translation unit boundaries
in order to reduce the binary size with LTO. The -import-instr-limit
flag defines a size limit, as the number of LLVM IR instructions, for
importing functions from other TUs, defaulting to 100.
Based on testing with arm64 defconfig, we found that a limit of 5 is a
reasonable compromise between performance and binary size, reducing the
size of a stripped vmlinux by 11%.
Suggested-by: George Burgess IV <gbiv@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-5-samitolvanen@google.com
With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-4-samitolvanen@google.com
This change adds build system support for Clang's Link Time
Optimization (LTO). With -flto, instead of ELF object files, Clang
produces LLVM bitcode, which is compiled into native code at link
time, allowing the final binary to be optimized globally. For more
details, see:
https://llvm.org/docs/LinkTimeOptimization.html
The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
which defaults to LTO being disabled. To use LTO, the architecture
must select ARCH_SUPPORTS_LTO_CLANG and support:
- compiling with Clang,
- compiling all assembly code with Clang's integrated assembler,
- and linking with LLD.
While using CONFIG_LTO_CLANG_FULL results in the best runtime
performance, the compilation is not scalable in time or
memory. CONFIG_LTO_CLANG_THIN enables ThinLTO, which allows
parallel optimization and faster incremental builds. ThinLTO is
used by default if the architecture also selects
ARCH_SUPPORTS_LTO_CLANG_THIN:
https://clang.llvm.org/docs/ThinLTO.html
To enable LTO, LLVM tools must be used to handle bitcode files, by
passing LLVM=1 and LLVM_IAS=1 options to make:
$ make LLVM=1 LLVM_IAS=1 defconfig
$ scripts/config -e LTO_CLANG_THIN
$ make LLVM=1 LLVM_IAS=1
To prepare for LTO support with other compilers, common parts are
gated behind the CONFIG_LTO option, and LTO can be disabled for
specific files by filtering out CC_FLAGS_LTO.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-3-samitolvanen@google.com
Move function tracer options to Kconfig to make it easier to add
new methods for generating __mcount_loc, and to make the options
available also when building kernel modules.
Note that FTRACE_MCOUNT_USE_* options are updated on rebuild and
therefore, work even if the .config was generated in a different
environment.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-2-samitolvanen@google.com
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
-----BEGIN PGP SIGNATURE-----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=+27V
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
* tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/kbuild: Document platform dependency practises
Documentation/kbuild: Document COMPILE_TEST dependencies
genksyms: Ignore module scoped _Static_assert()
modpost: turn static exports into error
modpost: turn section mismatches to error from fatal()
modpost: change license incompatibility to error() from fatal()
modpost: turn missing MODULE_LICENSE() into error
modpost: refactor error handling and clarify error/fatal difference
modpost: rename merror() to error()
kbuild: don't hardcode depmod path
kbuild: doc: document subdir-y syntax
kbuild: doc: clarify the difference between extra-y and always-y
kbuild: doc: split if_changed explanation to a separate section
kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections
kbuild: doc: fix 'List directories to visit when descending' section
kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/
kbuild: doc: update the description about kbuild Makefiles
Makefile.extrawarn: remove -Wnested-externs warning
tweewide: Fix most Shebang lines
depmod is not guaranteed to be in /sbin, just let make look for
it in the path like all the other invoked programs
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Move -Wcast-align to W=3, which tends to be false-positive and there
is no tree-wide solution.
- Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor
option and makes sense for .S files as well.
- Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings.
- Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings.
- Fix undesirable line breaks in *.mod files.
-----BEGIN PGP SIGNATURE-----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=/ysh
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move -Wcast-align to W=3, which tends to be false-positive and there
is no tree-wide solution.
- Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a
preprocessor option and makes sense for .S files as well.
- Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings.
- Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings.
- Fix undesirable line breaks in *.mod files.
* tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid split lines in .mod files
kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1
kbuild: Hoist '--orphan-handling' into Kconfig
Kbuild: do not emit debug info for assembly with LLVM_IAS=1
kbuild: use -fmacro-prefix-map for .S sources
Makefile.extrawarn: move -Wcast-align to W=3
Currently, '--orphan-handling=warn' is spread out across four different
architectures in their respective Makefiles, which makes it a little
unruly to deal with in case it needs to be disabled for a specific
linker version (in this case, ld.lld 10.0.1).
To make it easier to control this, hoist this warning into Kconfig and
the main Makefile so that disabling it is simpler, as the warning will
only be enabled in a couple places (main Makefile and a couple of
compressed boot folders that blow away LDFLAGS_vmlinx) and making it
conditional is easier due to Kconfig syntax. One small additional
benefit of this is saving a call to ld-option on incremental builds
because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN.
To keep the list of supported architectures the same, introduce
CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to
gain this automatically after all of the sections are specified and size
asserted. A special thanks to Kees Cook for the help text on this
config.
Link: https://github.com/ClangBuiltLinux/linux/issues/1187
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Clang's integrated assembler produces the warning for assembly files:
warning: DWARF2 only supports one section per compilation unit
If -Wa,-gdwarf-* is unspecified, then debug info is not emitted for
assembly sources (it is still emitted for C sources). This will be
re-enabled for newer DWARF versions in a follow up patch.
Enables defconfig+CONFIG_DEBUG_INFO to build cleanly with
LLVM=1 LLVM_IAS=1 for x86_64 and arm64.
Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/716
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Dmitry Golovin <dima@golovin.in>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Follow-up to commit a73619a845 ("kbuild: use -fmacro-prefix-map to
make __FILE__ a relative path"). Assembler sources also use __FILE__
macro so this flag should be also applied to those sources.
Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The "size" tool has been solely used by s390 to enforce .bss section usage
restrictions in early startup code. Since commit 980d5f9ab3 ("s390/boot:
enable .bss section for compressed kernel") and commit 2e83e0eb85
("s390: clean .bss before running uncompressed kernel") these restrictions
have been lifted for the decompressor and uncompressed kernel and the
size tool is now unused.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
Some old GCC versions between 4.5.0 and 4.9.1 might miscompile code
with -fvar-tracking-assingments (which is enabled by default with -g -O2).
Commit 2062afb4f8 ("Fix gcc-4.9.0 miscompilation of load_balance()
in scheduler") added -fno-var-tracking-assignments unconditionally to
work around this. But newer versions of GCC no longer have this bug, so
only add it for versions of GCC before 5.0. This allows various tools
such as a perf probe or gdb debuggers or systemtap to resolve variable
locations using dwarf locations in more code.
Signed-off-by: Mark Wielaard <mark@klomp.org>
Acked-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
Catch errors which at least gcc tolerates by default:
warning: 'return' with no value, in function returning non-void [-Wreturn-type]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
namespace.pl is intended to help locate symbols which are defined but
are not used externally. The goal is to avoid bloat of the namespace in
the resulting kernel image.
The script relies on object data, and only finds unused symbols for the
configuration used to generate that object data. This results in a lot
of false positive warnings such as symbols only used by a single
architecture, or symbols which are used externally only under certain
configurations.
Running namespace.pl using allyesconfig, allmodconfig, and
x86_64_defconfig yields the following results:
* allmodconfig
* 11122 unique symbol names with no external reference
* 1194 symbols listed as multiply defined
* 214 symbols it can't resolve
* allyesconfig
* 10997 unique symbol names with no external reference
* 1194 symbols listed as multiply defined
* 214 symbols it can't resolve
* x86_64_defconfig
* 5757 unique symbol names with no external reference
* 528 symbols listed as multiply defined
* 154 symbols it can't resolve
The script also has no way to easily limit the scope of the checks to
a given subset of the kernel, such as only checking for symbols defined
within a module or subsystem.
Discussion on public mailing lists seems to indicate that many view the
tool output as suspect or not very useful (see discussions at [1] and
[2] for further context).
As described by Masahiro Yamada at [2], namespace.pl provides 3 types of
checks: listing multiply defined symbols, resolving external symbols,
and warnings about symbols with no reference.
The first category of issues is easily caught by the linker as any set
of multiply defined symbols should fail to link. The second category of
issues is also caught by linking, as undefined symbols would cause
issues. Even with modules, these types of issues where a module relies
on an external symbol are caught by modpost.
The remaining category of issues reported is the list of symbols with no
external reference, and is the primary motivation of this script.
However, it ought to be clear from the above examples that the output is
difficult to sort through. Even allyesconfig has ~10000 entries.
The current submit-checklist indicates that patches ought to go through
namespacecheck and fix any new issues arising. But that itself presents
problems. As described at [1], many cases of reports are due to
configuration where a function is used externally by some configuration
settings. Prominent maintainers appear to dislike changes modify code
such that symbols become static based on CONFIG_* flags ([3], and [4])
One possible solution is to adjust the advice and indicate that we only
care about the output of namespacecheck on allyesconfig or allmodconfig
builds...
However, given the discussion at [2], I suspect that few people are
actively using this tool. It doesn't have a maintainer in the
MAINTAINERS flie, and it produces so many warnings for unused symbols
that it is difficult to use effectively. Thus, I propose we simply
remove it.
[1] https://lore.kernel.org/netdev/20200708164812.384ae8ea@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
[2] https://lore.kernel.org/lkml/20190129204319.15238-1-jacob.e.keller@intel.com/
[3] https://lore.kernel.org/netdev/20190828.154744.2058157956381129672.davem@davemloft.net/
[4] https://lore.kernel.org/netdev/20190827210928.576c5fef@cakuba.netronome.com/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ld's --build-id defaults to "sha1" style, while lld defaults to "fast".
The build IDs are very different between the two, which may confuse
programs that reference them.
Signed-off-by: Bill Wendling <morbo@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
The minimal compiler versions, GCC 4.9 and Clang 10 support this flag.
Here is the godbolt:
https://godbolt.org/z/xvjcMa
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Will Deacon <will@kernel.org>
The minimal compiler version, GCC 4.9 supports this flag.
Nathan Chancellor pointed out:
"This flag is technically ignored by clang (see commit
05b0798916f01690b5903302e51f3136274e291f) but that obviously
does not matter for the sake of this."
Here is the godbolt:
https://godbolt.org/z/59cK6o
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
The minimal compiler versions, GCC 4.9 and Clang 10 support this flag.
Here is the godbolt:
https://godbolt.org/z/odq8h9
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Will Deacon <will@kernel.org>
Move CFLAGS_KASAN*, CFLAGS_UBSAN, CFLAGS_KCSAN to Makefile.kasan,
Makefile.ubsan, Makefile.kcsan, respectively.
This commit also avoids the same -fsanitize=* flags being added to
CFLAGS_UBSAN multiple times.
Prior to this commit, the ubsan flags were appended by the '+='
operator, without any initialization. Some build targets such as
'make bindeb-pkg' recurses to the top Makefile, and ended up with
adding the same flags to CFLAGS_UBSAN twice.
Clear CFLAGS_UBSAN with ':=' to make it a simply expanded variable.
This is better than a recursively expanded variable, which evaluates
$(call cc-option, ...) multiple times before Kbuild starts descending
to subdirectories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Marco Elver <elver@google.com>
'make M=/path/to/your/external/module' creates a pointless built-in.a
in the top of the external module directory because KBUILD_BUILTIN is
set to 1.
Clear KBUILD_BUILTIN when we are building external modules so that
'make M=...' and 'make M=... modules' work equivalently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There was a request to preprocess the module linker script like we
do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512)
The difference between vmlinux.lds and module.lds is that the latter
is needed for external module builds, thus must be cleaned up by
'make mrproper' instead of 'make clean'. Also, it must be created
by 'make modules_prepare'.
You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by
'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to
arch/$(SRCARCH)/include/asm/module.lds.h, which is included from
scripts/module.lds.S.
scripts/module.lds is fine because 'make clean' keeps all the
build artifacts under scripts/.
You can add arch-specific sections in <asm/module.lds.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all the resolve_btfids 'users' are under CONFIG_BPF
code, so if we have CONFIG_BPF disabled, resolve_btfids will
fail, because there's no data to resolve.
Disabling resolve_btfids if there's CONFIG_BPF disabled,
so we won't fail such builds.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200923185735.3048198-1-jolsa@kernel.org
-----BEGIN PGP SIGNATURE-----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=Udfx
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching fix from Petr Mladek:
"Workaround for 'unreachable instruction' objtool warnings that happen
with some compiler versions"
* tag 'livepatching-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
Revert "kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled"
Use of the new -flive-patching flag was introduced with the following
commit:
43bd3a95c9 ("kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled")
This flag has several drawbacks:
- It disables some optimizations, so it can have a negative effect on
performance.
- According to the GCC documentation it's not compatible with LTO, which
will become a compatibility issue as LTO support gets upstreamed in
the kernel.
- It was intended to be used for source-based patch generation tooling,
as opposed to binary-based patch generation tooling (e.g.,
kpatch-build). It probably should have at least been behind a
separate config option so as not to negatively affect other livepatch
users.
- Clang doesn't have the flag, so as far as I can tell, this method of
generating patches is incompatible with Clang, which like LTO is
becoming more mainstream.
- It breaks GCC's implicit noreturn detection for local functions. This
is the cause of several "unreachable instruction" objtool warnings.
- The broken noreturn detection is an obvious GCC regression, but we
haven't yet gotten GCC developers to acknowledge that, which doesn't
inspire confidence in their willingness to keep the feature working as
optimizations are added or changed going forward.
- While there *is* a distro which relies on this flag for their distro
livepatch module builds, there's not a publicly documented way to
create safe livepatch modules with it. Its use seems to be based on
tribal knowledge. It serves no benefit to those who don't know how to
use it.
(In fact, I believe the current livepatch documentation and samples
are misleading and dangerous, and should be corrected. Or at least
amended with a disclaimer. But I don't feel qualified to make such
changes.)
Also, we have an idea for using objtool to detect function changes,
which could potentially obsolete the need for this flag anyway.
At this point the flag has no benefits for upstream which would
counteract the above drawbacks. Revert it until it becomes more ready.
This reverts commit 43bd3a95c9.
Fixes: 43bd3a95c9 ("kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/696262e997359666afa053fe7d1a9fb2bb373964.1595010490.git.jpoimboe@redhat.com
This patch adds clang-tidy and the clang static-analyzer as make
targets. The goal of this patch is to make static analysis tools
usable and extendable by any developer or researcher who is familiar
with basic c++.
The current static analysis tools require intimate knowledge of the
internal workings of the static analysis. Clang-tidy and the clang
static analyzers expose an easy to use api and allow users unfamiliar
with clang to write new checks with relative ease.
===Clang-tidy===
Clang-tidy is an easily extendable 'linter' that runs on the AST.
Clang-tidy checks are easy to write and understand. A check consists of
two parts, a matcher and a checker. The matcher is created using a
domain specific language that acts on the AST
(https://clang.llvm.org/docs/LibASTMatchersReference.html). When AST
nodes are found by the matcher a callback is made to the checker. The
checker can then execute additional checks and issue warnings.
Here is an example clang-tidy check to report functions that have calls
to local_irq_disable without calls to local_irq_enable and vice-versa.
Functions flagged with __attribute((annotation("ignore_irq_balancing")))
are ignored for analysis. (https://reviews.llvm.org/D65828)
===Clang static analyzer===
The clang static analyzer is a more powerful static analysis tool that
uses symbolic execution to find bugs. Currently there is a check that
looks for potential security bugs from invalid uses of kmalloc and
kfree. There are several more general purpose checks that are useful for
the kernel.
The clang static analyzer is well documented and designed to be
extensible.
(https://clang-analyzer.llvm.org/checker_dev_manual.html)
(https://github.com/haoNoQ/clang-analyzer-guide/releases/download/v0.1/clang-analyzer-guide-v0.1.pdf)
The main draw of the clang tools is how accessible they are. The clang
documentation is very nice and these tools are built specifically to be
easily extendable by any developer. They provide an accessible method of
bug-finding and research to people who are not overly familiar with the
kernel codebase.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, you need to manually run scripts/gen_compile_commands.py
to create compile_commands.json. It parses all the .*.cmd files found
under the specified directory.
If you rebuild the kernel over again without 'make clean',
.*.cmd files from older builds will create stale entries in
compile_commands.json.
This commit wires up the compile_commands.json rule to Makefile, and
makes it parse only the .*.cmd files involved in the current build.
Pass $(KBUILD_VMLINUX_OBJS), $(KBUILD_VMLINUX_LIBS), and modules.order
to the script. The objects or archives linked to vmlinux are listed in
$(KBUILD_VMLINUX_OBJS) or $(KBUILD_VMLINUX_LIBS). All the modules are
listed in modules.order.
You can create compile_commands.json from Make:
$ make -j$(nproc) CC=clang compile_commands.json
You can also build vmlinux, modules, and compile_commands.json all
together in a single command:
$ make -j$(nproc) CC=clang all compile_commands.json
It works for M= builds as well. In this case, compile_commands.json
is created in the top directory of the external module.
This is convenient, but it has a drawback; the coverage of the
compile_commands.json is reduced because only the objects linked to
vmlinux or modules are handled. For example, the following C files are
not included in the compile_commands.json:
- Decompressor source files (arch/*/boot/)
- VDSO source files
- C files used to generate intermediates (e.g. kernel/bounds.c)
- Standalone host programs
I think it is fine for most developers because our main interest is
the kernel-space code.
If you want to cover all the compiled C files, please build the kernel,
then run the script manually as you did before:
$ make clean # if you want to remove stale .cmd files [optional]
$ make -j$(nproc) CC=clang
$ scripts/gen_compile_commands.py
Here is a note for out-of-tree builds. 'make compile_commands.json'
works with O= option, but please notice compile_commands.json is
created in the object tree instead of the source tree.
Some people may want to have compile_commands.json in the source tree
because Clang Tools searches for it through all parent paths of the
first input source file.
However, you cannot do this for O= builds. Kbuild should never generate
any build artifact in the source tree when O= is given because the
source tree might be read-only. Any write attempt to the source tree
is monitored and the violation may be reported. See the commit log of
8ef14c2c41.
So, the only possible way is to create compile_commands.json in the
object tree, then specify '-p <build-path>' when you use clang-check,
clang-tidy, etc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Some targets (localyesconfig, localmodconfig, defconfig) hide the
command running, but the others do not.
Users know which Kconfig flavor they are running, so it is OK to hide
the command. Add $(Q) to all commands consistently. If you want to see
the full command running, pass V=1 from the command line.
syncconfig is the exceptional case, which occurs without explicit
command invocation by the user. Display the Kbuild-style log for it.
The ugly bare log will go away.
[Before]
scripts/kconfig/conf --syncconfig Kconfig
[After]
SYNC include/config/auto.conf
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
While playing with [1] I saw that the handling
of CONFIG_DEBUG_INFO can be simplified.
[1] https://patchwork.kernel.org/patch/11716107/
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The '%' in filter/filter-out matches to any number of any characters,
including empty string.
So, '%config' matches to 'config', and '%install' to 'install'.
Drop the redundant patterns.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Recently 0day reported many strange performance changes (regression or
improvement), in which there was no obvious relation between the culprit
commit and the benchmark at the first look, and it causes people to doubt
the test itself is wrong.
Upon further check, many of these cases are caused by the change to the
alignment of kernel text or data, as whole text/data of kernel are linked
together, change in one domain may affect alignments of other domains.
gcc has an option '-falign-functions=n' to force text aligned, and with
that option enabled, some of those performance changes will be gone, like
[1][2][3].
Add this option so that developers and 0day can easily find performance
bump caused by text alignment change, as tracking these strange bump is
quite time consuming. Though it can't help in other cases like data
alignment changes like [4].
Following is some size data for v5.7 kernel built with a RHEL config used
in 0day:
text data bss dec filename
19738771 13292906 5554236 38585913 vmlinux.noalign
19758591 13297002 5529660 38585253 vmlinux.align32
Raw vmlinux size in bytes:
v5.7 v5.7+align32
253950832 254018000 +0.02%
Some benchmark data, most of them have no big change:
* hackbench: [ -1.8%, +0.5%]
* fsmark: [ -3.2%, +3.4%] # ext4/xfs/btrfs
* kbuild: [ -2.0%, +0.9%]
* will-it-scale: [ -0.5%, +1.8%] # mmap1/pagefault3
* netperf:
- TCP_CRR [+16.6%, +97.4%]
- TCP_RR [-18.5%, -1.8%]
- TCP_STREAM [ -1.1%, +1.9%]
[1] https://lore.kernel.org/lkml/20200114085637.GA29297@shao2-debian/
[2] https://lore.kernel.org/lkml/20200330011254.GA14393@feng-iot/
[3] https://lore.kernel.org/lkml/1d98d1f0-fe84-6df7-f5bd-f4cb2cdb7f45@intel.com/
[4] https://lore.kernel.org/lkml/20200205123216.GO12867@shao2-debian/
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: http://lkml.kernel.org/r/1595475001-90945-1-git-send-email-feng.tang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
Commit d26e941492 ("kbuild: no gcc-plugins during cc-option tests")
was neeeded because scripts/Makefile.gcc-plugins was too early.
This is unneeded by including scripts/Makefile.gcc-plugins last,
and being careful to not add cc-option tests after it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, the top Makefile includes all of scripts/Makefile.<feature>
even if the associated CONFIG option is disabled.
Do not include unneeded Makefiles in order to slightly optimize the
parse stage.
Include $(include-y), and ignore $(include-).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When you clean the build tree for ARCH=arm, you may see the following
error message from 'nm' command:
$ make -j24 ARCH=arm clean
CLEAN arch/arm/crypto
CLEAN arch/arm/kernel
CLEAN arch/arm/mach-at91
CLEAN arch/arm/mach-omap2
CLEAN arch/arm/vdso
CLEAN certs
CLEAN lib
CLEAN usr
CLEAN net/wireless
CLEAN drivers/firmware/efi/libstub
nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
/bin/sh: 1: arithmetic expression: expecting primary: " "
CLEAN arch/arm/boot/compressed
CLEAN drivers/scsi
CLEAN drivers/tty/vt
CLEAN arch/arm/boot
CLEAN vmlinux.symvers modules.builtin modules.builtin.modinfo
Even if you rerun the same command, the error message will not be
shown despite vmlinux is already gone.
To reproduce it, the parallel option -j is needed. Single thread
cleaning always executes 'archclean', 'vmlinuxclean' in this order,
so vmlinux still exists when arch/arm/boot/compressed/ is cleaned.
Looking at arch/arm/boot/compressed/Makefile does not help understand
the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are
assigned with '=' operator, hence, they are not expanded unless used.
Obviously, 'make clean' does not use them.
In fact, the root cause exists in the top Makefile:
export LDFLAGS_vmlinux
Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in
arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean
has a command to execute. This is why the error message shows up only
when there exist build artifacts in arch/arm/boot/compressed/.
Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile
will fix it as far as ARCH=arm is concerned, but I think the proper fix
is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile.
LDFLAGS_vmlinux in the top Makefile contains linker flags for the top
vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for
arch/arm/boot/compressed/vmlinux. They just happen to have the same
variable name, but are used for different purposes. Stop shadowing
LDFLAGS_vmlinux.
This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a
command line parameter instead of via an environment variable. LD and
KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway,
they must be included in cmd_link-vmlinux to allow if_changed to detect
the changes in LD or KBUILD_LDFLAGS.
The following Makefiles are not affected:
arch/arm/boot/compressed/Makefile
arch/h8300/boot/compressed/Makefile
arch/nios2/boot/compressed/Makefile
arch/parisc/boot/compressed/Makefile
arch/s390/boot/compressed/Makefile
arch/sh/boot/compressed/Makefile
arch/sh/boot/romimage/Makefile
arch/x86/boot/compressed/Makefile
They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the
top Makefile.
We need to take a closer look at the impact to unicore32 and xtensa.
arch/unicore32/boot/compressed/Makefile only uses '+=' operator for
LDFLAGS_vmlinux. So, the decompressor previously inherited the linker
flags from the top Makefile.
However, commit 70fac51fea ("unicore32 additional architecture files:
boot process") was merged before commit 1f2bfbd00e ("kbuild: link of
vmlinux moved to a script"). So, I rather consider this is a bug fix of
1f2bfbd00e.
arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also
considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux
when commit 4bedea9454 ("[PATCH] xtensa: Architecture support for
Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux),
which is now empty.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
- Introduce CONFIG_INIT_STACK_ALL_ZERO (Alexander Potapenko)
-----BEGIN PGP SIGNATURE-----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=c2Rf
-----END PGP SIGNATURE-----
Merge tag 'var-init-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull automatic variable initialization updates from Kees Cook:
"This adds the "zero" init option from Clang, which is being used
widely in production builds of Android and Chrome OS (though it also
keeps the "pattern" init, which is better for debug builds).
- Introduce CONFIG_INIT_STACK_ALL_ZERO (Alexander Potapenko)"
* tag 'var-init-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
security: allow using Clang's zero initialization for stack variables
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bARW
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main change in this cycle was to add support for ZSTD-compressed
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip"
* tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: dontdiff: Add zstd compressed files
.gitignore: Add ZSTD-compressed files
x86: Add support for ZSTD compressed kernel
x86: Bump ZO_z_extra_bytes margin for zstd
usr: Add support for zstd compressed initramfs
init: Add support for zstd compressed kernel
lib: Add zstd support to decompress
lib: Prepare zstd for preboot environment, improve performance
- Add the zstd and zstd22 cmds to scripts/Makefile.lib
- Add the HAVE_KERNEL_ZSTD and KERNEL_ZSTD options
Architecture specific support is still needed for decompression.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-4-nickrterrell@gmail.com
- do not use non-portable strsep() in a host program
- fix single target builds for external modules
- change Clang's --prefix option to make it work for the latest Clang
-----BEGIN PGP SIGNATURE-----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=zebF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild into master
Pull Kbuild fixes from Masahiro Yamada:
- do not use non-portable strsep() in a host program
- fix single target builds for external modules
- change Clang's --prefix option to make it work for the latest Clang
* tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
kbuild: fix single target builds for external modules
modpost: remove use of non-standard strsep() in HOSTCC code
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if
$(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit,
GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to
/usr/bin/ and Clang as of 11 will search for both
$(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.
GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle,
$(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice,
$(prefix)aarch64-linux-gnu/$needle rarely contains executables.
To better model how GCC's -B/--prefix takes in effect in practice, newer
Clang (since
3452a0d8c1)
only searches for $(prefix)$needle. Currently it will find /usr/bin/as
instead of /usr/bin/aarch64-linux-gnu-as.
Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
(/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the
appropriate cross compiling GNU as (when -no-integrated-as is in
effect).
Cc: stable@vger.kernel.org
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).
The main changes are:
1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.
2) Better libbpf support on older kernels, from Andrii.
3) Additional AF_XDP stats, from Ciara.
4) build time resolution of BTF IDs, from Jiri.
5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Using BTF_ID_LIST macro to define lists for several helpers
using BTF arguments.
And running resolve_btfids on vmlinux elf object during linking,
so the .BTF_ids section gets the IDs resolved.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-5-jolsa@kernel.org
The resolve_btfids tool will be used during the vmlinux linking,
so it's necessary it's ready for it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-3-jolsa@kernel.org
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
- fix various bugs in xconfig
- fix some issues in cross-compilation using Clang
- fix documentation
-----BEGIN PGP SIGNATURE-----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=0BKC
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes frin Masahiro Yamada:
- fix various bugs in xconfig
- fix some issues in cross-compilation using Clang
- fix documentation
* tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
.gitignore: Do not track `defconfig` from `make savedefconfig`
kbuild: make Clang build userprogs for target architecture
kbuild: fix CONFIG_CC_CAN_LINK(_STATIC) for cross-compilation with Clang
kconfig: qconf: parse newer types at debug info
kconfig: qconf: navigate menus on hyperlinks
kconfig: qconf: don't show goback button on splitMode
kconfig: qconf: simplify the goBack() logic
kconfig: qconf: re-implement setSelected()
kconfig: qconf: make debug links work again
kconfig: qconf: make search fully work again on split mode
kconfig: qconf: cleanup includes
docs: kbuild: fix ReST formatting
gcc-plugins: fix gcc-plugins directory path in documentation
Programs added 'userprogs' should be compiled for the target
architecture i.e. the same architecture as the kernel.
GCC does this correctly since the target architecture is implied
by the toolchain prefix.
Clang builds userspace programs always for the host architecture
because the target triple is currently missing.
Fix this.
Fixes: 7f3a59db27 ("kbuild: add infrastructure to build userspace programs")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
This reverts commit e0b250b57d,
which broke build systems that need to install files to a certain
path, but do not set INSTALL_MOD_PATH when invoking 'make install'.
$ make INSTALL_PATH=/tmp/destdir install
mkdir: cannot create directory ‘/lib/modules/5.8.0-rc1+/’: Permission denied
Makefile:1342: recipe for target '_builtin_inst_' failed
make: *** [_builtin_inst_] Error 1
While modules.builtin is useful also for CONFIG_MODULES=n, this change
in the behavior is quite unexpected. Maybe "make modules_install"
can install modules.builtin irrespective of CONFIG_MODULES as Jonas
originally suggested.
Anyway, that commit should be reverted ASAP.
Reported-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
In addition to -ftrivial-auto-var-init=pattern (used by
CONFIG_INIT_STACK_ALL now) Clang also supports zero initialization for
locals enabled by -ftrivial-auto-var-init=zero. The future of this flag
is still being debated (see https://bugs.llvm.org/show_bug.cgi?id=45497).
Right now it is guarded by another flag,
-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang,
which means it may not be supported by future Clang releases. Another
possible resolution is that -ftrivial-auto-var-init=zero will persist
(as certain users have already started depending on it), but the name
of the guard flag will change.
In the meantime, zero initialization has proven itself as a good
production mitigation measure against uninitialized locals. Unlike pattern
initialization, which has a higher chance of triggering existing bugs,
zero initialization provides safe defaults for strings, pointers, indexes,
and sizes. On the other hand, pattern initialization remains safer for
return values. Chrome OS and Android are moving to using zero
initialization for production builds.
Performance-wise, the difference between pattern and zero initialization
is usually negligible, although the generated code for zero
initialization is more compact.
This patch renames CONFIG_INIT_STACK_ALL to CONFIG_INIT_STACK_ALL_PATTERN
and introduces another config option, CONFIG_INIT_STACK_ALL_ZERO, that
enables zero initialization for locals if the corresponding flags are
supported by Clang.
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20200616083435.223038-1-glider@google.com
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit
10e68b02c8 ("Makefile: support compressed debug info")
added support for compressed debug sections.
Support is detected by checking
- does the compiler support -gz=zlib
- does the assembler support --compressed-debug-sections=zlib
- does the linker support --compressed-debug-sections=zlib
However, the gcc driver's support for this option is somewhat
convoluted. The driver's builtin specs are set based on the version of
binutils that it was configured with. It reports an error if the
configure-time linker/assembler (i.e., not necessarily the actual
assembler that will be run) do not support the option, but only if the
assembler (or linker) is actually invoked when -gz=zlib is passed.
The cc-option check in scripts/Kconfig.include does not invoke the
assembler, so the gcc driver reports success even if it does not support
the option being passed to the assembler.
Because the as-option check passes the option directly to the assembler
via -Wa,--compressed-debug-sections=zlib, the gcc driver does not see
this option and will never report an error.
Combined with an installed version of binutils that is more recent than
the one the compiler was built with, it is possible for all three tests
to succeed, yet an actual compilation with -gz=zlib to fail.
Moreover, it is unnecessary to explicitly pass
--compressed-debug-sections=zlib to the assembler via -Wa, since the
driver will do that automatically when it supports -gz=zlib.
Convert the as-option to just -gz=zlib, simplifying it as well as
performing a better test of the gcc driver's capabilities.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp.
GZIP, BZIP2, LZOP env variables are reserved by the tools. The original
attempt to redefine them internally doesn't work in makefiles/scripts
intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in
broken builds. There can be other broken build commands because of this,
so the universal solution is to use non-reserved env variables for the
compression tools.
Fixes: 8dfb61dcba ("kbuild: add variables for compression tools")
Signed-off-by: Denis Efremov <efremov@linux.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
-----BEGIN PGP SIGNATURE-----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=GKe5
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Many applications check for available kernel features via:
- /proc/modules (loaded modules, present if CONFIG_MODULES=y)
- $(MODLIB)/modules.builtin (builtin modules)
They fail to detect features if the kernel was built with CONFIG_MODULES=n
and modules.builtin isn't installed.
Therefore, add the target "_builtin_inst_" and make "install" and
"modules_install" depend on it.
Tests results:
- make install: kernel image is copied as before, modules.builtin copied
- make modules_install: (CONFIG_MODULES=n) nothing is copied, exit 1
Signed-off-by: Jonas Zeiger <jonas.zeiger@talpidae.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If modpost fails to load a symbol dump file, it cannot check unresolved
symbols, hence module dependency will not be added. Nor CRCs can be added.
Currently, external module builds check only $(objtree)/Module.symvers,
but it should check files specified by KBUILD_EXTRA_SYMBOLS as well.
Move the warning message from the top Makefile to scripts/Makefile.modpost
and print the warning if any dump file is missing.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The full build runs modpost twice, first for vmlinux.o and second for
modules.
The first pass dumps all the vmlinux symbols into Module.symvers, but
the second pass parses vmlinux again instead of reusing the dump file,
presumably because it needs to avoid accumulating stale symbols.
Loading symbol info from a dump file is faster than parsing an ELF object.
Besides, modpost deals with various issues to parse vmlinux in the second
pass.
A solution is to make the first pass dumps symbols into a separate file,
vmlinux.symvers. The second pass reads it, and parses module .o files.
The merged symbol information is dumped into Module.symvers in the same
way as before.
This makes further modpost cleanups possible.
Also, it fixes the problem of 'make vmlinux', which previously overwrote
Module.symvers, throwing away module symbols.
I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked
when you cross this commit. Otherwise, vmlinux.symvers would not be
generated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Make modules.order depend on $(obj-m), and use if_changed to build it.
This will avoid unneeded update of modules.order, which will be useful
to optimize the modpost stage.
Currently, the second pass of modpost is always invoked. By checking the
timestamp of modules.order, we can avoid the unneeded modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Branch Target Identification (BTI)
* Support for ARMv8.5-BTI in both user- and kernel-space. This
allows branch targets to limit the types of branch from which
they can be called and additionally prevents branching to
arbitrary code, although kernel support requires a very recent
toolchain.
* Function annotation via SYM_FUNC_START() so that assembly
functions are wrapped with the relevant "landing pad"
instructions.
* BPF and vDSO updates to use the new instructions.
* Addition of a new HWCAP and exposure of BTI capability to
userspace via ID register emulation, along with ELF loader
support for the BTI feature in .note.gnu.property.
* Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
- Shadow Call Stack (SCS)
* Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each
task that holds only return addresses. This protects function
return control flow from buffer overruns on the main stack.
* Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
* Core support for SCS, should other architectures want to use it
too.
* SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
- CPU feature detection
* Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a
concern for KVM, which disabled support for 32-bit guests on
such a system.
* Addition of new ID registers and fields as the architecture has
been extended.
- Perf and PMU drivers
* Minor fixes and cleanups to system PMU drivers.
- Hardware errata
* Unify KVM workarounds for VHE and nVHE configurations.
* Sort vendor errata entries in Kconfig.
- Secure Monitor Call Calling Convention (SMCCC)
* Update to the latest specification from Arm (v1.2).
* Allow PSCI code to query the SMCCC version.
- Software Delegated Exception Interface (SDEI)
* Unexport a bunch of unused symbols.
* Minor fixes to handling of firmware data.
- Pointer authentication
* Add support for dumping the kernel PAC mask in vmcoreinfo so
that the stack can be unwound by tools such as kdump.
* Simplification of key initialisation during CPU bringup.
- BPF backend
* Improve immediate generation for logical and add/sub
instructions.
- vDSO
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
- ACPI
- Work around for an ambiguity in the IORT specification relating
to the "num_ids" field.
- Support _DMA method for all named components rather than only
PCIe root complexes.
- Minor other IORT-related fixes.
- Miscellaneous
* Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
* Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
=w3qi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
This will slightly change the link order; drivers-y from arch Makefile
will be linked after virt/built-in.a, but I guess this is not a big
deal.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
No arch Makefile specifies init-y.
Merge init-y into core-y. This does not change the link order.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This hunk has two 'ifdef CONFIG_TRIM_UNUSED_KSYMS ... endif' blocks
with no other code interleaved. Merge them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This code does not work as stated in the comment.
$(CONFIG_MODVERSIONS) is always empty because it is expanded before
include/config/auto.conf is included. Hence, 'make modules' with
CONFIG_MODVERSION=y cannot record the version CRCs.
This has been broken since 2003, commit ("kbuild: Enable modules to be
build using the "make dir/" syntax"). [1]
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=15c6240cdc44bbeef3c4797ec860f9765ef4f1a7
Cc: linux-stable <stable@vger.kernel.org> # v2.5.71+
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As debug information gets larger and larger, it helps significantly save
the size of vmlinux images to compress the information in the debug
information sections. Note: this debug info is typically split off from
the final compressed kernel image, which is why vmlinux is what's used
in conjunction with GDB. Minimizing the debug info size should have no
impact on boot times, or final compressed kernel image size.
All of the debug sections will have a `C` flag set.
$ readelf -S <object file>
$ bloaty vmlinux.gcc75.compressed.dwarf4 -- \
vmlinux.gcc75.uncompressed.dwarf4
FILE SIZE VM SIZE
-------------- --------------
+0.0% +18 [ = ] 0 [Unmapped]
-73.3% -114Ki [ = ] 0 .debug_aranges
-76.2% -2.01Mi [ = ] 0 .debug_frame
-73.6% -2.89Mi [ = ] 0 .debug_str
-80.7% -4.66Mi [ = ] 0 .debug_abbrev
-82.9% -4.88Mi [ = ] 0 .debug_ranges
-70.5% -9.04Mi [ = ] 0 .debug_line
-79.3% -10.9Mi [ = ] 0 .debug_loc
-39.5% -88.6Mi [ = ] 0 .debug_info
-18.2% -123Mi [ = ] 0 TOTAL
$ bloaty vmlinux.clang11.compressed.dwarf4 -- \
vmlinux.clang11.uncompressed.dwarf4
FILE SIZE VM SIZE
-------------- --------------
+0.0% +23 [ = ] 0 [Unmapped]
-65.6% -871 [ = ] 0 .debug_aranges
-77.4% -1.84Mi [ = ] 0 .debug_frame
-82.9% -2.33Mi [ = ] 0 .debug_abbrev
-73.1% -2.43Mi [ = ] 0 .debug_str
-84.8% -3.07Mi [ = ] 0 .debug_ranges
-65.9% -8.62Mi [ = ] 0 .debug_line
-86.2% -40.0Mi [ = ] 0 .debug_loc
-42.0% -64.1Mi [ = ] 0 .debug_info
-22.1% -122Mi [ = ] 0 TOTAL
For x86_64 defconfig + LLVM=1 (before):
Elapsed (wall clock) time (h:mm:ss or m:ss): 3:22.03
Maximum resident set size (kbytes): 43856
For x86_64 defconfig + LLVM=1 (after):
Elapsed (wall clock) time (h:mm:ss or m:ss): 3:32.52
Maximum resident set size (kbytes): 1566776
Thanks to:
Nick Clifton helped us to provide the minimal binutils version.
Sedat Dilek found an increase in size of debug .deb package.
Cc: Nick Clifton <nickc@redhat.com>
Suggested-by: David Blaikie <blaikie@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
$(firstword ...) in scripts/Makefile.modpost was added by commit
3f3fd3c055 ("[PATCH] kbuild: allow multi-word $M in Makefile.modpost")
to build multiple external module directories.
It was a solution to resolve symbol dependencies when an external
module depends on another external module.
Commit 0d96fb20b7 ("kbuild: Add new Kbuild variable
KBUILD_EXTRA_SYMBOLS") introduced another solution by passing symbol
info via KBUILD_EXTRA_SYMBOLS, then broke the multi-word M= support.
include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \
$(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile)
... does not work if KBUILD_EXTMOD contains multiple words.
This feature has been broken for more than a decade. Remove the
bitrotten code, and stop parsing if M or KBUILD_EXTMOD contains
multiple words.
As Documentation/kbuild/modules.rst explains, if your module depends
on another one, there are two solutions:
- add a common top-level Kbuild file
- use KBUILD_EXTRA_SYMBOLS
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I think all the warnings have been fixed by now. Make it a fatal error.
Check it before modpost because we need to stop building *.ko files.
Also, pass modules.order via a script parameter.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some targets are internal-use only.
It is tedious to care about "what if __build_one_by_one is contained
in $(MAKECMDGOALS)?" etc.
Prefix internal targets with double underscores. Stop parsing Makefile
if they are directly run.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge {CLEAN,MRPROPER,DISTCLEAN}_DIRS into {CLEAN,MRPROPER,DISTCLEAN}_FILES
because the difference is just the -r option passed to the 'rm' command.
Do likewise as commit 1634f2bfdb ("kbuild: remove clean-dirs syntax").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If include/generated/autoconf.h is accidentally lost somehow,
there is no clear way to fix it. Make it self-healing.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kbuild supports the infrastructure to build host programs, but there
was no support to build userspace programs for the target architecture
(i.e. the same architecture as the kernel).
Sam Ravnborg worked on this in 2014 (https://lkml.org/lkml/2014/7/13/154),
but it was not merged. One problem at that time was, there was no good way
to know whether $(CC) can link standalone programs. In fact, pre-built
kernel.org toolchains [1] are often used for building the kernel, but they
do not provide libc.
Now, we can handle this cleanly because the compiler capability is
evaluated at the Kconfig time. If $(CC) cannot link standalone programs,
the relevant options are hidden by 'depends on CC_CAN_LINK'.
The implementation just mimics scripts/Makefile.host
The userspace programs are compiled with the same flags as the host
programs. In addition, it uses -m32 or -m64 if it is found in
$(KBUILD_CFLAGS).
This new syntax has two usecases.
- Sample programs
Several userspace programs under samples/ include UAPI headers
installed in usr/include. Most of them were previously built for
the host architecture just to use the 'hostprogs' syntax.
However, 'make headers' always works for the target architecture.
This caused the arch mismatch in cross-compiling. To fix this
distortion, sample code should be built for the target architecture.
- Bpfilter
net/bpfilter/Makefile compiles bpfilter_umh as the user mode helper,
and embeds it into the kernel. Currently, it overrides HOSTCC with
CC to use the 'hostprogs' syntax. This hack should go away.
[1]: https://mirrors.edge.kernel.org/pub/tools/crosstool/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
This change adds generic support for Clang's Shadow Call Stack,
which uses a shadow stack to protect return addresses from being
overwritten by an attacker. Details are available here:
https://clang.llvm.org/docs/ShadowCallStack.html
Note that security guarantees in the kernel differ from the ones
documented for user space. The kernel must store addresses of
shadow stacks in memory, which means an attacker capable reading
and writing arbitrary memory may be able to locate them and hijack
control flow by modifying the stacks.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[will: Numerous cosmetic changes]
Signed-off-by: Will Deacon <will@kernel.org>
gcc-10 now warns about passing aliasing pointers to functions that take
restricted pointers.
That's actually a great warning, and if we ever start using 'restrict'
in the kernel, it might be quite useful. But right now we don't, and it
turns out that the only thing this warns about is an idiom where we have
declared a few functions to be "printf-like" (which seems to make gcc
pick up the restricted pointer thing), and then we print to the same
buffer that we also use as an input.
And people do that as an odd concatenation pattern, with code like this:
#define sysfs_show_gen_prop(buffer, fmt, ...) \
snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)
where we have 'buffer' as both the destination of the final result, and
as the initial argument.
Yes, it's a bit questionable. And outside of the kernel, people do have
standard declarations like
int snprintf( char *restrict buffer, size_t bufsz,
const char *restrict format, ... );
where that output buffer is marked as a restrict pointer that cannot
alias with any other arguments.
But in the context of the kernel, that 'use snprintf() to concatenate to
the end result' does work, and the pattern shows up in multiple places.
And we have not marked our own version of snprintf() as taking restrict
pointers, so the warning is incorrect for now, and gcc picks it up on
its own.
If we do start using 'restrict' in the kernel (and it might be a good
idea if people find places where it matters), we'll need to figure out
how to avoid this issue for snprintf and friends. But in the meantime,
this warning is not useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the final array bounds warning removal for gcc-10 for now.
Again, the warning is good, and we should re-enable all these warnings
when we have converted all the legacy array declaration cases to
flexible arrays. But in the meantime, it's just noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is another fine warning, related to the 'zero-length-bounds' one,
but hitting the same historical code in the kernel.
Because C didn't historically support flexible array members, we have
code that instead uses a one-sized array, the same way we have cases of
zero-sized arrays.
The one-sized arrays come from either not wanting to use the gcc
zero-sized array extension, or from a slight convenience-feature, where
particularly for strings, the size of the structure now includes the
allocation for the final NUL character.
So with a "char name[1];" at the end of a structure, you can do things
like
v = my_malloc(sizeof(struct vendor) + strlen(name));
and avoid the "+1" for the terminator.
Yes, the modern way to do that is with a flexible array, and using
'offsetof()' instead of 'sizeof()', and adding the "+1" by hand. That
also technically gets the size "more correct" in that it avoids any
alignment (and thus padding) issues, but this is another long-term
cleanup thing that will not happen for 5.7.
So disable the warning for now, even though it's potentially quite
useful. Having a slew of warnings that then hide more urgent new issues
is not an improvement.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a fine warning, but we still have a number of zero-length arrays
in the kernel that come from the traditional gcc extension. Yes, they
are getting converted to flexible arrays, but in the meantime the gcc-10
warning about zero-length bounds is very verbose, and is hiding other
issues.
I missed one actual build failure because it was hidden among hundreds
of lines of warning. Thankfully I caught it on the second go before
pushing things out, but it convinced me that I really need to disable
the new warnings for now.
We'll hopefully be all done with our conversion to flexible arrays in
the not too distant future, and we can then re-enable this warning.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have some rather random rules about when we accept the
"maybe-initialized" warnings, and when we don't.
For example, we consider it unreliable for gcc versions < 4.9, but also
if -O3 is enabled, or if optimizing for size. And then various kernel
config options disabled it, because they know that they trigger that
warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES).
And now gcc-10 seems to be introducing a lot of those warnings too, so
it falls under the same heading as 4.9 did.
At the same time, we have a very straightforward way to _enable_ that
warning when wanted: use "W=2" to enable more warnings.
So stop playing these ad-hoc games, and just disable that warning by
default, with the known and straight-forward "if you want to work on the
extra compiler warnings, use W=123".
Would it be great to have code that is always so obvious that it never
confuses the compiler whether a variable is used initialized or not?
Yes, it would. In a perfect world, the compilers would be smarter, and
our source code would be simpler.
That's currently not the world we live in, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC
rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR
aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR
Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j
XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y
+km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y
3pEsQuE=
=whbL
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh
Resolve these conflicts:
arch/x86/Kconfig
arch/x86/kernel/Makefile
Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As Documentation/kbuild/llvm.rst implies, building the kernel with a
full set of LLVM tools gets very verbose and unwieldy.
Provide a single switch LLVM=1 to use Clang and LLVM tools instead
of GCC and Binutils. You can pass it from the command line or as an
environment variable.
Please note LLVM=1 does not turn on the integrated assembler. You need
to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the
integrated assembler, I think we can make it default.
We discussed what we need, and we agreed to go with a simple boolean
flag that switches both target and host tools:
https://lkml.org/lkml/2020/3/28/494https://lkml.org/lkml/2020/4/3/43
Some items discussed, but not adopted:
- LLVM_DIR
When multiple versions of LLVM are installed, I just thought supporting
LLVM_DIR=/path/to/my/llvm/bin/ might be useful.
CC = $(LLVM_DIR)clang
LD = $(LLVM_DIR)ld.lld
...
However, we can handle this by modifying PATH. So, we decided to not do
this.
- LLVM_SUFFIX
Some distributions (e.g. Debian) package specific versions of LLVM with
naming conventions that use the version as a suffix.
CC = clang$(LLVM_SUFFIX)
LD = ld.lld(LLVM_SUFFIX)
...
will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc.,
but the suffixed versions in /usr/bin/ are symlinks to binaries in
/usr/lib/llvm-#/bin/, so this can also be handled by PATH.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The 'AS' variable is unused for building the kernel. Only the remaining
usage is to turn on the integrated assembler. A boolean flag is a better
fit for this purpose.
AS=clang was added for experts. So, I replaced it with LLVM_IAS=1,
breaking the backward compatibility.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Kbuild supports not only obj-y but also lib-y to list objects linked to
vmlinux.
The difference between them is that all the objects from obj-y are
forcibly linked to vmlinux, whereas the objects from lib-y are linked
as needed; if there is no user of a lib-y object, it is not linked.
lib-y is intended to list utility functions that may be called from all
over the place (and may be unused at all), but it is a problem for
EXPORT_SYMBOL(). Even if there is no call-site in the vmlinux, we need
to keep exported symbols for the use from loadable modules.
Commit 7f2084fa55 ("[kbuild] handle exports in lib-y objects reliably")
worked around it by linking a dummy object, lib-ksyms.o, which contains
references to all the symbols exported from lib.a in that directory.
It uses the linker script command, EXTERN. Unfortunately, the meaning of
EXTERN of ld.lld is different from that of ld.bfd. Therefore, this does
not work with LD=ld.lld (CBL issue #515).
Anyway, the build rule of lib-ksyms.o is somewhat tricky. So, I want to
get rid of it.
At first, I was thinking of accumulating lib-y objects into obj-y
(or even replacing lib-y with obj-y entirely), but the lib-y syntax
is used beyond the ordinary use in lib/ and arch/*/lib/.
Examples:
- drivers/firmware/efi/libstub/Makefile builds lib.a, which is linked
into vmlinux in the own way (arm64), or linked to the decompressor
(arm, x86).
- arch/alpha/lib/Makefile builds lib.a which is linked not only to
vmlinux, but also to bootloaders in arch/alpha/boot/Makefile.
- arch/xtensa/boot/lib/Makefile builds lib.a for use from
arch/xtensa/boot/boot-redboot/Makefile.
One more thing, adding everything to obj-y would increase the vmlinux
size of allnoconfig (or tinyconfig).
For less impact, I tweaked the destination of lib.a at the top Makefile;
when CONFIG_MODULES=y, lib.a goes to KBUILD_VMLINUX_OBJS, which is
forcibly linked to vmlinux, otherwise lib.a goes to KBUILD_VMLINUX_LIBS
as before.
The size impact for normal usecases is quite small since at lease one
symbol in every lib-y object is eventually called by someone. In case
you are intrested, here are the figures.
x86_64_defconfig:
text data bss dec hex filename
19566602 5422072 1589328 26578002 1958c52 vmlinux.before
19566932 5422104 1589328 26578364 1958dbc vmlinux.after
The case with the biggest impact is allnoconfig + CONFIG_MODULES=y.
ARCH=x86 allnoconfig + CONFIG_MODULES=y:
text data bss dec hex filename
1175162 254740 1220608 2650510 28718e vmlinux.before
1177974 254836 1220608 2653418 287cea vmlinux.after
Hopefully this is still not a big deal. The per-file trimming with the
static library is not so effective after all.
If fine-grained optimization is desired, some architectures support
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, which trims dead code per-symbol
basis. When LTO is supported in mainline, even better optimization will
be possible.
Link: https://github.com/ClangBuiltLinux/linux/issues/515
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, we disable -Wtautological-compare, which in turn disables a
bunch of more specific tautological comparison warnings that are useful
for the kernel such as -Wtautological-bitwise-compare. See clang's
documentation below for the other warnings that are suppressed by
-Wtautological-compare. Now that all of the major/noisy warnings have
been fixed, enable -Wtautological-compare so that more issues can be
caught at build time by various continuous integration setups.
-Wtautological-constant-out-of-range-compare is kept disabled under a
normal build but visible at W=1 because there are places in the kernel
where a constant or variable size can change based on the kernel
configuration. These are not fixed in a clean/concise way and the ones
I have audited so far appear to be harmless. It is not a subgroup but
rather just one warning so we do not lose out on much coverage by
default.
Link: https://github.com/ClangBuiltLinux/linux/issues/488
Link: http://releases.llvm.org/10.0.0/tools/clang/docs/DiagnosticsReference.html#wtautological-compare
Link: https://bugs.llvm.org/show_bug.cgi?id=42666
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[Build system]
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define
a fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
[Kconfig]
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files
- relax the 'imply' behavior so that symbols implied by y can become m
- make 'imply' obey 'depends on' in order to make 'imply' really weak
[Misc]
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=wT8A
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"Build system:
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
Kconfig:
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
files
- relax the 'imply' behavior so that symbols implied by 'y' can
become 'm'
- make 'imply' obey 'depends on' in order to make 'imply' really weak
Misc:
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups"
* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
Makefile: Update kselftest help information
kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
kbuild: add outputmakefile to no-dot-config-targets
kbuild: remove AS variable
net: wan: wanxl: refactor the firmware rebuild rule
net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
kbuild: add comment about grouped target
kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
kconfig: remove unused variable in qconf.cc
sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
kbuild: refactor Makefile.dtbinst more
kbuild: compute the dtbs_install destination more simply
Makefile: disallow data races on gcc-10 as well
kconfig: make 'imply' obey the direct dependency
kconfig: allow symbols implied by y to become m
net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
modpost: rework and consolidate logging interface
kbuild: allow to run dt_binding_check without kernel configuration
...
The target outputmakefile is used to generate a Makefile
for out-of-tree builds and does not depend on the kernel
configuration.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As commit 5ef872636c ("kbuild: get rid of misleading $(AS) from
documents") noted, we rarely use $(AS) directly in the kernel build.
Now that the only/last user of $(AS) in drivers/net/wan/Makefile was
converted to $(CC), $(AS) is no longer used in the build process.
You can still pass in AS=clang, which is just a switch to turn on
the LLVM integrated assembler.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
GNU Make commit 8c888d95f618 ("[SV 8297] Implement "grouped targets"
for explicit rules.") added the '&:' syntax.
I think '&:' is a perfect fit here, but we cannot use it any time
soon. Just add a TODO comment.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add -Wall to catch more warnings for C++ host programs.
When I submitted the previous version, the 0-day bot reported
-Wc++11-compat warnings for old GCC:
HOSTCXX -fPIC scripts/gcc-plugins/latent_entropy_plugin.o
In file included from /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/tm.h:28:0,
from scripts/gcc-plugins/gcc-common.h:15,
from scripts/gcc-plugins/latent_entropy_plugin.c:78:
/usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/config/elfos.h:102:21: warning: C++11 requires a space between string literal and macro [-Wc++11-compat]
fprintf ((FILE), "%s"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\
^
/usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/config/elfos.h:170:24: warning: C++11 requires a space between string literal and macro [-Wc++11-compat]
fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \
^
In file included from /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/tm.h:42:0,
from scripts/gcc-plugins/gcc-common.h:15,
from scripts/gcc-plugins/latent_entropy_plugin.c:78:
/usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/defaults.h:126:24: warning: C++11 requires a space between string literal and macro [-Wc++11-compat]
fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \
^
The source of the warnings is in the plugin headers, so we have no
control of it. I just suppressed them by adding -Wno-c++11-compat to
scripts/gcc-plugins/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
The 'dtbinst_root' is used to remember the root of the in-kernel dts
directory (i.e. arch/*/boot/dts), but it looks clumsy.
I prefer using two variables 'obj' and 'dst' to track the in-kernel
directory and the install destination, respectively.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
