Commit Graph

308 Commits

Author SHA1 Message Date
Janusz Krzysztofik
c8c99699bd omap: McBSP: Introduce caching in register write operations
Determine cache size required per McBSP port at init time, based on
processor type running on.

Allocate space for storing cached copies of McBSP register values at
port request.

Modify omap_msbcp_write() function to update the cache with every
register write operation.

Modify omap_mcbsp_read() to support reading from cache or hardware.

Update MCBSP_READ() macro for modified omap_mcbsp_read() function API.

Introduce a new macro that reads from the cache.

Tested on OMAP1510 based Amstrad Delta using linux-omap for-next, commit
fb7380d70e041e4b3892f6b19dff7efb609d15a4 (2.6.33-rc3+ dated 2010-01-11).
Compile-tested with: omap_perseus2_730_defconfig, omap_generic_1610_defconfig,
omap_generic_2420_defconfig, omap_2430sdp_defconfig, omap_3430sdp_defconfig,
omap_4430sdp_defconfig with CONFIG_OMAP_MCBSP=y selected.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 10:03:33 -08:00
Ladislav Michl
561b036ad9 omap: convert boards to use physmap-flash
Convert OMAP based boards to use physmap-flash. Refreshed against today's
Linux omap kernel tree

Cc: linux-mtd@lists.infradead.org
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 10:03:32 -08:00
Tony Lindgren
be26a3df0b Merge branch 'debug-ll' into omap-for-linus 2010-02-15 09:26:07 -08:00
Tony Lindgren
0c8219f030 omap: Make uncompress code and DEBUG_LL code generic
Define arch_decomp_setup() the same way as some other
architectures do. Use arch_id to configure the debug uart
based on the machine_is by storing it into the uart
scratchpad register for DEBUG_LL code to use.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 08:49:01 -08:00
Tony Lindgren
4f2c49fedf omap: Clean the serial port defines
This way we don't have conflicts with the defines
with compiling in multiple omaps. Set the addresses
for uarts in struct omap_globals for the early serial
init code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 08:48:53 -08:00
Tony Lindgren
4e6d488af3 ARM: 5910/1: ARM: Add tmp register for addruart and loadsp
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.

NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:

$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
	arch/arm/*/include/*/debug-macro.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:27:52 +00:00
Paul Walmsley
0dfc242ff0 OMAP1 clock: convert armwdt_ck to use the fixed divisor recalc function
The armwdt_ck clock uses a fixed divisor, so it can use the OMAP clock
fixed divisor recalculation code, rather than a custom function.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-26 20:12:57 -07:00
Paul Walmsley
af022fafa8 OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0"
Commit 52650505fb caused clock initialization
to fail on OMAP1 with "BUG: spinlock lockup on CPU#0" -- this is because
omap1_select_table_rate() and omap1_round_to_table_rate() call clk_get_rate()
with the clockfw spinlock held.  Fix by accessing the rate directly from
the internal clock framework functions.

Thanks to Tony Lindgren <tony@atomide.com> for reporting and testing the fix.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-01-20 13:35:28 -07:00
Tony Lindgren
27dba4bcf8 Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus 2010-01-08 14:27:56 -08:00
Cory Maccarrone
9b11769f99 OMAP1 clock: remove __initdata from struct clk_functions to prevent crash
Commit 52650505fb added an __initdata
decoration to the structure containing the clk_enable and clk_disable
functions.  Once init data was freed, these pointers went to null, and
the next enable or disable call caused the kernel to crash.  This
change removes this decoration.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
[paul@pwsan.com: patch manually split and commit message edited]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08 15:23:14 -07:00
Cory Maccarrone
e8ae6b6e4d OMAP1 clock: Add missing clocks for OMAP 7xx
This change adds in some missing clocks that were needed as a result
of 526505... (OMAP1 clock: convert mach-omap1/clock.h to
mach-omap1/clock_data.c).  Prior to this, it was just assumed that
these clocks existed for all devices, and it was used directly instead
of calling it out with a clock_get call or similar.  So, not having
the CK_7XX meant these clocks weren't being used anymore for omap 7xx
devices, which broke things badly.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
[paul@pwsan.com: commit message edited]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08 15:23:10 -07:00
Cory Maccarrone
c5c4dce45d omap1: Add 7xx clocks and pin muxes for SPI
Commit 35c9049b27 added
drivers/spi/omap_spi_100k.c.

This patch add the related clocks and pin muxing
entries to make the driver work on omap7xx platforms.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08 10:29:05 -08:00
Janusz Krzysztofik
8d72c796c9 omap1: LCD_DMA: Use some define rather than a hexadecimal
The patch corrects the issue introduced with one of my earlier patches:
	OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set[1]
as pointed out by OMAP subsystem maintainer.

Applies on top of my prevoius patch:
  OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1[2]

Tested on Amstrad Delta
Compile tested with omap_generic_2420_defconfig

[1] http://patchwork.kernel.org/patch/57922/
[2] http://patchwork.kernel.org/patch/61952/

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:36 -08:00
Cory Maccarrone
bf92a40762 omap1: I2C mux and clocks for omap7xx
This change adds MUX pin configuration and clocks for I2C support
to OMAP 730 and 850-based devices.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:34 -08:00
Cory Maccarrone
106997c1a4 omap1: Add omap7xx USB support
This change implements USB client side support into the HTC
Herald board configuration.  It uses a similar, but updated
algorithm to initialize the USB as is used in the linwizard
project.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:34 -08:00
Janusz Krzysztofik
f8e9e98454 omap1: DMA: move LCD related code from plat-omap to mach-omap1
All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and
apparently only is available on a subset of OMAP1 chips).

Move this code to mach-omap1/lcd_dma.c.

Tested on OMAP1510 Amstrad Delta.
Compile-tested with omap_generic_2420_defconfig.

Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:33 -08:00
Ladislav Michl
414f552ad8 omap1: Use gen_nand
Since omapnand driver never find its way into mainline, switch to gen_nand instead.
Following patch is compile tested only, but it is based on code I wrote for
NetStar board and runtime tested it there.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Imre Deak <imre.deak@nokia.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Kevin Hilman <kjh@hilman.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:33 -08:00
Ladislav Michl
3bc4801478 omap: use smc91x_platdata to setup smc91x
Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff
in smc91x driver

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:33 -08:00
Tony Lindgren
b63128e812 omap: Split i2c platform init for mach-omap1 and mach-omap2
Otherwise we cannot limit new mux code to mach-omap2.
The same signal names should eventually work for other
omaps under mach-omap2.

Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP,
just OMAP_PIN_INPUT is enough.

Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:32 -08:00
Paul Walmsley
52650505fb OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
The OMAP1 clock code currently #includes a large .h file full of static
data structures.  Instead, define the data in a .c file.

Russell King <linux@arm.linux.org.uk> proposed this new arrangement:

    http://marc.info/?l=linux-omap&m=125967425908895&w=2

This patch also deals with most of the flagrant checkpatch violations.

While here, separate the mpu_rate data structures out into their own
files, opp.h and opp_data.c.  In the long run, these mpu_rate tables
should be replaced with OPP code.

Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to
mark omap1_clk_functions as __initdata to avoid a section warning:

    http://patchwork.kernel.org/patch/64366/

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Nishanth Menon <nm@ti.com>
2009-12-11 17:00:40 -07:00
Paul Walmsley
6f62b58dd4 OMAP1 clock: convert test in disable_unused() to use ENABLE_ON_INIT
mach-omap1/clock.c:omap1_clk_disable_unused() contains a test that
assumes that the clock structures are available in the file's
namespace.  After a following patch, this will no longer be the case.
So we need to reimplement that test.  It turns out that we already
have a facility in the clock framework to handle this case - the
ENABLE_ON_INIT flag - used on OMAP2/3.  Remove the offending test and
mark the clocks that it was intended to catch as ENABLE_ON_INIT.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11 17:00:40 -07:00
Paul Walmsley
ebd893ded2 OMAP1/2/3 clock: remove paranoid checks in preparation for clock{,2xxx,3xxx}_data.c
Some parts of the clock code took advantage of the fact that the statically
allocated clock tree was in clock{,24xx,34xx}.c's local namespace to do some
extra argument checks.  These are overzealous and are more difficult to
maintain when the clock tree is in a separate namespace, so, remove them.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11 16:12:07 -07:00
Tomi Valkeinen
91773a00f8 OMAP: OMAPFB: split omapfb.h
Split arch/arm/plat-omap/include/mach/omapfb.h into two files:

include/linux/omapfb.h - ioctls etc for userspace and some kernel
                         stuff for board files
drivers/video/omap/omapfb.h - for omapfb internal use

This cleans up omapfb.h and also makes it easier for the upcoming new
DSS driver to co-exist with the old driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2009-12-09 12:04:06 +02:00
Cory Maccarrone
9c2816f7bd omap1: Add board support and LCD for HTC Herald
This patch introduces support for the HTC Herald (T-Mobile
Wing, etc.) series of smart phones -- board support and LCD
panel settings.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:33 -08:00
Cory Maccarrone
45f780a061 omap1: omap_udc: Add clocking and disable vbus sense for omap7xx
The l3_ocpi_ck clock is needed on omap7xx processors for USB.
Additionally, bit 8 of the SOFT_REQ_REG needs to be enabled for
the usb_dc_ck on omap7xx, which is a different bit than that
of the omap16xx-defined clock of the same name.

I added a provision for the usb_dc_ck and l3_ocpi_ck clocks as
dc_clk and hhc_clk, respectively, for omap7xx CPUs.  Additionally,
I added a check in machine_without_vbus_sense for all omap7xx
devices, as presently I know of no omap7xx-based devices that
have vbus sense, and it made more sense to me to use a cpu check
here than to spell out each machine one at a time.  Finally, DMA
is disabled for omap7xx, as it causes problems with these chips.

Cc: linux-usb@vger.kernel.org
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:32 -08:00
Cory Maccarrone
490a566522 omap1: mmc: Add platform init for omap7xx
The MMC mux pins normally used by omap chips in devices.c
are different from what is needed by omap7xx chips.  This
change adds a conditional around the mux setup code to
enable the correct mux pins.

The omap730 and omap850 both use a different clock for the "fck"
clock of the MMC interface than other omap processors based on the
SOFT_REQ_REG, pin 12.  The "ick" clock is the same as that used
by other omap processors.

* Added the missing clock definition as mmc3_ck to clock.h
* Added the clock definition to omap_clks in clock.c
* Added CK_7XX to the mmci-omap.0 "ick" clock already in clock.c

With these changes, it is now possible to initialize and use MMC
cards with omap730 and omap850 devices.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:32 -08:00
Alexander Shishkin
9d30b99f35 omap: Eliminate OMAP_MAX_NR_PORTS
Eliminate OMAP_MAX_NR_PORTS

Note that also the null terminator entry for omap1
serial_platform_data needs to be now removed to avoid
oopsing.

Note that mach-omap1 uses struct plat_serial8250_port
array, which requires a null terminator at the end,
and that's why we need to use ARRAY_SIZE - 1. This
is not needed on mach-omap2 as the array used is
struct omap_uart_state, and does not use a null
terminator.

Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:32 -08:00
Tony Lindgren
774facda20 Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
Janusz Krzysztofik
b3dba0b81e omap1: Fix DSP public peripherals support for ams-delta
DSP public peripherals used to work on OMAP1510 based (or all OMAP1 class?)
machines as long as old dspgateway code were present in the l-o tree. For
several months it is no longer included, breaking support for McBSP1 based
audio on Amstrad Delta, for example.

This patch, derived from the old dspgateway code, corrects the problem for the
board by simply taking the DSP out of reset state, I guess. That way, things
should not break when a new dsp code is added to the tree, and the change can
be reverted then.

If there are any reports on McBSP1 or other DSP public peripherals not working
for other OMAP1 machines (I've not heard of any for now), I can prepare a more
general patch providing an extra include file with a helper function defined.

Created and tested against linux-2.6.32-rc5

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22 14:47:42 -07:00
Janusz Krzysztofik
c33da3a800 omap1: Fix redundant UARTs pin muxing that can break other hardware support
Commit 15ac408ee5 removed enabled_uart
and OMAP_TAG_UART. This works for mach-omap2, but causes issues on
mach-omap1 for some boards as the mach-omap1 serial.c was muxing
pins based on the enabled_uart flag for 15xx.

Fix this by muxing pins in board-*.c files for the 15xx boards for
the uart ports that had enabled_uart flag set before the commit
above.

Tested on Amsdtrad Delta only.

Note that in the future we should add support for powering down
the uarts with a timer like mach-omap2/serial.c does. Otherwise
the enabled uarts will be blocking retention-while-idle.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22 14:47:42 -07:00
Tony Lindgren
ce491cf854 omap: headers: Move remaining headers from include/mach to include/plat
Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.

This was done with:

#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"

for header in $headers; do
	old="#include <mach\/$header"
	new="#include <plat\/$header"
	for dir in $omap_dirs; do
		find $dir -type f -name \*.[chS] | \
			xargs sed -i "s/$old/$new/"
	done
	find drivers/ -type f -name \*omap*.[chS] | \
		xargs sed -i "s/$old/$new/"
	for file in $other_files; do
		sed -i "s/$old/$new/" $file
	done
done

for header in $(ls $mach_dir_old/*.h); do
	git mv $header $plat_dir_new/
done

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20 09:40:47 -07:00
Tony Lindgren
3eff851b9d omap: headers: Create headers necessary for compile under mach-omap1 and mach-omap2
Create the headers needed for compiling under
mach-omap1/include/mach and mach-omap2/include/mach.

This was done with the following script:

#!/bin/bash
mach_files="clkdev.h gpio.h hardware.h io.h irqs.h memory.h \
smp.h system.h timex.h uncompress.h vmalloc.h"
omaps="mach-omap1 mach-omap2"

mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"

mkdir -p $plat_dir_new
git add $plat_dir_new

for dir in $omaps; do
	mach_dir_new="arch/arm/$dir/include/mach"
	for header in $mach_files; do
		file="$mach_dir_new/$header"
		if [ ! -f $file ]; then
			echo -ne "/*\n * $file\n */\n\n#include <plat/$header>\n" > $file
			git add $file
			if [ ! -f $plat_dir_new/$header ]; then
				git mv $mach_dir_old/$header $plat_dir_new/$header
			fi
		fi
	done
done

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19 17:32:58 -07:00
Tony Lindgren
1e79ab8a45 omap: headers: Move mtd-xip.h to be mach-omap1 specific
These registers are omap1 specific.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19 17:32:55 -07:00
Tony Lindgren
72464dbae2 omap: Split vmalloc.h for mach-omap1 and mach-omap2
Earlier patch "omap: Remap L3, L4 to get more kernel io address space"
changed the VMALLOC_END.

However, this change causes problems on mach-omap1:

BUG: mapping for 0xe0000000 at 0xe0000000 overlaps vmalloc space
BUG: mapping for 0xe1000000 at 0xe1000000 overlaps vmalloc space

Fix this by creating separate vmalloc.h files for mach-omap1
and mach-omap2.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19 17:26:29 -07:00
Tony Lindgren
c97c686467 omap: headers: Split entry-macro.S for mach-omap1 and mach-omap2
Split entry-macro.S for mach-omap1 and mach-omap2

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19 17:26:19 -07:00
Tony Lindgren
aca59b8922 omap: headers: Split debug-macro.S for mach-omap1 and mach-omap2
This also creates the include/mach subdirectories under
mach-omap1 and mach-omap2.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19 17:26:17 -07:00
Tony Lindgren
84f90c9cc8 omap: Change low-level serial init to use ioremap
Change low-level serial init to use ioremap

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-16 09:53:00 -07:00
Alistair Buxton
1f73b4de93 OMAP850: PM: Add an ARCH_OMAP850 check
This just makes the same warning be printed on omap850 and omap730.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
2009-10-07 23:14:08 +01:00
Angelo Arrifano
ab985ff471 OMAP7XX: Clocks: Add ck_ref and armxor
These clocks are required for booting.

Signed-off-by: Angelo Arrifano <miknix@gmail.com>
Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:08 +01:00
Alistair Buxton
7c00692640 OMAP7XX: Rename all the rest of the omap730 references in omap1 core
This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.

This updates all the remaining omap730 references in miscellaneous local
variables, macros and similar.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:06 +01:00
Alistair Buxton
372b1c32e7 OMAP7XX: Replace omap730 references in irqs.h and all users
This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.

Turns INT_730_* to INT_7XX_* for definitions in irqs.h and all users.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:06 +01:00
Alistair Buxton
b51988db94 OMAP7XX: Update core omap1 files to use omap7xx.h
This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:05 +01:00
Alistair Buxton
bf1cb7eb4f OMAP7XX: McBSP: Add omap850 support
This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:04 +01:00
Alistair Buxton
39a8b08610 OMAP7XX: Clocks: Add omap850 support
This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.

This file had no omap850 specific code. Initial clock support was done in
the Linwizard tree by Zebediah C. McClure.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:04 +01:00
Alistair Buxton
4b9100dde2 OMAP7XX: PM: Add omap850 support
This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.

This file had no omap850 specific code. Original omap850 support in Linwizard
was done by cloning the omap730 code. That work was done by Zebediah C. McClure.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:03 +01:00
Alistair Buxton
559663b980 OMAP7XX: IRQ: Remove duplicate omap850 code
This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.

This fixes a bug which prevents IRQs from being enabled on omap850 due to
a missing check in entry-macro.S, which was found by Cory Maccarrone.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:03 +01:00
Alistair Buxton
190215f963 OMAP7XX: Mux: Remove duplicate omap850 code
This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:01 +01:00
Alistair Buxton
ab49df737d OMAP7XX: IO: Remove duplicate omap850 code
This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:14:00 +01:00
Alistair Buxton
d8723ae2a4 OMAP7XX: Serial: Remove duplicate omap850 code
This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>
2009-10-07 23:09:52 +01:00
Angelo Arrifano
f5ee2fc793 omap: Fix wrong jtag_id for 850
Original message:
The previous value of the jtag_id was set for the omap730.  For the
omap850, this value is different, and this was causing
autodetection to fail.

Reported-by:
  Cory Maccarrone <darkstar6262@gmail.com>
  Angelo Arrifano <miknix@gmail.com>
  Alistair Buxton <a.j.buxton@gmail.com>

Signed-off-by: Angelo Arrifano <miknix@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-09-24 16:23:13 -07:00