Fixes the following W=1 kernel build warning(s):
drivers/ata/libata-acpi.c:493: warning: expecting prototype for ata_acpi_gtm_xfermode(). Prototype was for ata_acpi_gtm_xfermask() instead
drivers/ata/libata-acpi.c:648: warning: Function parameter or member 'prev_gtf' not described in 'ata_acpi_run_tf'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-15-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/sata_mv.c:1929: warning: expecting prototype for mv_bmdma_stop(). Prototype was for mv_bmdma_stop_ap() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mark Lord <mlord@pobox.com>
Cc: ALWAYS copy <linux-ide@vger.kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-14-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_cs5530.c:283: warning: Function parameter or member 'pdev' not described in 'cs5530_init_one'
drivers/ata/pata_cs5530.c:283: warning: Excess function parameter 'dev' description in 'cs5530_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-13-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_legacy.c:606: warning: expecting prototype for opt82c465mv_qc_issue(). Prototype was for opti82c46x_qc_issue() instead
drivers/ata/pata_legacy.c:933: warning: Function parameter or member 'probe' not described in 'legacy_init_one'
drivers/ata/pata_legacy.c:933: warning: Excess function parameter 'pl' description in 'legacy_init_one'
drivers/ata/pata_legacy.c:1024: warning: Function parameter or member 'primary' not described in 'legacy_check_special_cases'
drivers/ata/pata_legacy.c:1024: warning: Function parameter or member 'secondary' not described in 'legacy_check_special_cases'
drivers/ata/pata_legacy.c:1024: warning: Excess function parameter 'master' description in 'legacy_check_special_cases'
drivers/ata/pata_legacy.c:1024: warning: Excess function parameter 'master' description in 'legacy_check_special_cases'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Colten Edwards <pje120@cs.usask.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-12-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/ata_generic.c:164: warning: expecting prototype for ata_generic_init(). Prototype was for ata_generic_init_one() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Hat Inc <alan@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-11-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_opti.c:82: warning: Function parameter or member 'val' not described in 'opti_write_reg'
drivers/ata/pata_opti.c:82: warning: Excess function parameter 'value' description in 'opti_write_reg'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jaromir Koutek <miri@punknet.cz>
Cc: Jan Harkes <jaharkes@cwi.nl>
Cc: Mark Lord <mlord@pobox.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-10-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sl82c105.c:191: warning: expecting prototype for sl82c105_bmdma_end(). Prototype was for sl82c105_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-9-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_piccolo.c:87: warning: expecting prototype for ata_tosh_init(). Prototype was for ata_tosh_init_one() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Hat Inc <alan@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-8-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_via.c:675: warning: Function parameter or member 'pdev' not described in 'via_reinit_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-7-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_it821x.c:346: warning: expecting prototype for it821x_passthru_dma_start(). Prototype was for it821x_passthru_bmdma_start() instead
drivers/ata/pata_it821x.c:369: warning: expecting prototype for it821x_passthru_dma_stop(). Prototype was for it821x_passthru_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-6-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_triflex.c:143: warning: expecting prototype for triflex_dma_start(). Prototype was for triflex_bmdma_start() instead
drivers/ata/pata_triflex.c:159: warning: Function parameter or member 'qc' not described in 'triflex_bmdma_stop'
drivers/ata/pata_triflex.c:159: warning: expecting prototype for triflex_dma_stop(). Prototype was for triflex_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Torben Mathiasen <torben.mathiasen@hp.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-5-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sis.c:124: warning: Excess function parameter 'deadline' description in 'sis_133_cable_detect'
drivers/ata/pata_sis.c:529: warning: Function parameter or member 'mask' not described in 'sis_133_mode_filter'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Lionel Bouton <Lionel.Bouton@inet6.fr>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: "L.C. Chang" <lcchang@sis.com.tw>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-4-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sil680.c:68: warning: Function parameter or member 'adev' not described in 'sil680_seldev'
drivers/ata/pata_sil680.c:254: warning: Function parameter or member 'try_mmio' not described in 'sil680_init_chip'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Red Hat <alan@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-3-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_pdc202xx_old.c:127: warning: expecting prototype for pdc202xx_configure_dmamode(). Prototype was for pdc202xx_set_dmamode() instead
drivers/ata/pata_pdc202xx_old.c:228: warning: expecting prototype for pdc2026x_bmdma_end(). Prototype was for pdc2026x_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-2-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking
code to pass the positive IRQ #s to ata_host_activate(), propagate errors
upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code
treats 0 as an indication that polling should be used anyway...
Fixes: 0df0d0a0ea ("[libata] ARM: add ixp4xx PATA driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking code
to pass the positive IRQ #s to ata_host_activate(), propagate upstream
-EPROBE_DEFER, and set up the driver to polling mode on (negative) errors
and IRQ0 (libata treats IRQ #0 as a polling mode anyway)...
Fixes: a480167b23 ("pata_arasan_cf: Adding support for arasan compact flash host controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_pdc2027x.c:209: warning: expecting prototype for pdc2027x_pata_cable_detect(). Prototype was for pdc2027x_cable_detect() instead
drivers/ata/pata_pdc2027x.c:262: warning: expecting prototype for pdc2720x_mode_filter(). Prototype was for pdc2027x_mode_filter() instead
drivers/ata/pata_pdc2027x.c:513: warning: Function parameter or member 'board_idx' not described in 'pdc_adjust_pll'
drivers/ata/pata_pdc2027x.c:513: warning: expecting prototype for adjust_pll(). Prototype was for pdc_adjust_pll() instead
drivers/ata/pata_pdc2027x.c:599: warning: expecting prototype for detect_pll_input_clock(). Prototype was for pdc_detect_pll_input_clock() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Albert Lee <albertcc@tw.ibm.com>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Frank Tiernan <frankt@promise.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_optidma.c:298: warning: expecting prototype for optidma_make_bits(). Prototype was for optidma_make_bits43() instead
drivers/ata/pata_optidma.c:319: warning: Function parameter or member 'r_failed' not described in 'optidma_set_mode'
drivers/ata/pata_optidma.c:361: warning: Function parameter or member 'pdev' not described in 'optiplus_with_udma'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_jmicron.c:135: warning: Function parameter or member 'id' not described in 'jmicron_init_one'
drivers/ata/pata_jmicron.c:135: warning: Excess function parameter 'ent' description in 'jmicron_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_marvell.c:125: warning: Function parameter or member 'id' not described in 'marvell_init_one'
drivers/ata/pata_marvell.c:125: warning: Excess function parameter 'ent' description in 'marvell_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_hpt3x2n.c:247: warning: expecting prototype for hpt3x2n_bmdma_end(). Prototype was for hpt3x2n_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_cs5520.c:61: warning: Function parameter or member 'pio' not described in 'cs5520_set_timings'
drivers/ata/pata_cs5520.c:257: warning: Function parameter or member 'mesg' not described in 'cs5520_pci_device_suspend'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_atiixp.c:103: warning: Function parameter or member 'pio' not described in 'atiixp_set_pio_timing'
drivers/ata/pata_atiixp.c:241: warning: expecting prototype for atiixp_dma_stop(). Prototype was for atiixp_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: ATI Inc <hyu@ati.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_amd.c:331: warning: expecting prototype for nv_probe_init(). Prototype was for nv_pre_reset() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_ali.c:119: warning: Function parameter or member 'mask' not described in 'ali_20_filter'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: CJ <cjtsai@ali.com.tw>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Alan Cox <alan@redhat.com>
Cc: Clear Zhang <Clear.Zhang@ali.com.tw>
Cc: linux-ide@vger.kernel.org
Cc: and cc <htejun@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/sata_mv.c:1162: warning: Function parameter or member 'ap' not described in 'mv_start_edma'
drivers/ata/sata_mv.c:1162: warning: Function parameter or member 'port_mmio' not described in 'mv_start_edma'
drivers/ata/sata_mv.c:1162: warning: Function parameter or member 'protocol' not described in 'mv_start_edma'
drivers/ata/sata_mv.c:1162: warning: Excess function parameter 'base' description in 'mv_start_edma'
drivers/ata/sata_mv.c:1535: warning: Function parameter or member 'enable_bmdma' not described in 'mv_bmdma_enable_iie'
drivers/ata/sata_mv.c:1535: warning: expecting prototype for mv_bmdma_enable(). Prototype was for mv_bmdma_enable_iie() instead
drivers/ata/sata_mv.c:1930: warning: Function parameter or member 'ap' not described in 'mv_bmdma_stop_ap'
drivers/ata/sata_mv.c:1930: warning: expecting prototype for mv_bmdma_stop(). Prototype was for mv_bmdma_stop_ap() instead
drivers/ata/sata_mv.c:2228: warning: Function parameter or member 'ap' not described in 'mv_send_fis'
drivers/ata/sata_mv.c:3263: warning: Function parameter or member 'hpriv' not described in 'mv6_reset_hc'
drivers/ata/sata_mv.c:3263: warning: Function parameter or member 'n_hc' not described in 'mv6_reset_hc'
drivers/ata/sata_mv.c:3541: warning: Function parameter or member 'hpriv' not described in 'soc_is_65n'
drivers/ata/sata_mv.c:3541: warning: expecting prototype for soc_is_65(). Prototype was for soc_is_65n() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mark Lord <mlord@pobox.com>
Cc: ALWAYS copy <linux-ide@vger.kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/ahci_xgene.c:564: warning: Function parameter or member 'host' not described in 'xgene_ahci_handle_broken_edge_irq'
drivers/ata/ahci_xgene.c:564: warning: Excess function parameter 'ata_host' description in 'xgene_ahci_handle_broken_edge_irq'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Loc Ho <lho@apm.com>
Cc: Tuan Phan <tphan@apm.com>
Cc: Suman Tripathi <stripathi@apm.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_hpt37x.c:283: warning: Function parameter or member 'mask' not described in 'hpt370_filter'
drivers/ata/pata_hpt37x.c:301: warning: Function parameter or member 'mask' not described in 'hpt370a_filter'
drivers/ata/pata_hpt37x.c:473: warning: expecting prototype for hpt370_bmdma_end(). Prototype was for hpt370_bmdma_stop() instead
drivers/ata/pata_hpt37x.c:567: warning: expecting prototype for hpt37x_bmdma_end(). Prototype was for hpt37x_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_hpt366.c:200: warning: Function parameter or member 'mask' not described in 'hpt366_filter'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_amd.c:179: warning: Excess function parameter 'adev' description in 'amd_fifo_setup'
drivers/ata/pata_amd.c:331: warning: Function parameter or member 'link' not described in 'nv_pre_reset'
drivers/ata/pata_amd.c:331: warning: Function parameter or member 'deadline' not described in 'nv_pre_reset'
drivers/ata/pata_amd.c:331: warning: expecting prototype for nv_probe_init(). Prototype was for nv_pre_reset() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_artop.c:278: warning: expecting prototype for artop_6210_qc_defer(). Prototype was for artop6210_qc_defer() instead
drivers/ata/pata_artop.c:359: warning: Function parameter or member 'id' not described in 'artop_init_one'
drivers/ata/pata_artop.c:359: warning: Excess function parameter 'ent' description in 'artop_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Thibaut VARENE <varenet@parisc-linux.org>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_ali.c:119: warning: Function parameter or member 'mask' not described in 'ali_20_filter'
drivers/ata/pata_ali.c:119: warning: Excess function parameter 'ap' description in 'ali_20_filter'
drivers/ata/pata_ali.c:322: warning: Function parameter or member 'qc' not described in 'ali_check_atapi_dma'
drivers/ata/pata_ali.c:322: warning: Excess function parameter 'adev' description in 'ali_check_atapi_dma'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: CJ <cjtsai@ali.com.tw>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Alan Cox <alan@redhat.com>
Cc: Clear Zhang <Clear.Zhang@ali.com.tw>
Cc: linux-ide@vger.kernel.org
Cc: and cc <htejun@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/libata-pmp.c:76: warning: Function parameter or member 'val' not described in 'sata_pmp_write'
drivers/ata/libata-pmp.c:76: warning: Excess function parameter 'r_val' description in 'sata_pmp_write'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <teheo@suse.de>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/libata-sata.c:1085: warning: expecting prototype for port_alloc(). Prototype was for ata_sas_port_alloc() instead
drivers/ata/libata-sata.c:1140: warning: expecting prototype for ata_port_stop(). Prototype was for ata_sas_port_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <htejun@gmail.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/libata-transport.c:258: warning: Function parameter or member 'ap' not described in 'ata_tport_delete'
drivers/ata/libata-transport.c:258: warning: Excess function parameter 'port' description in 'ata_tport_delete'
drivers/ata/libata-transport.c:384: warning: Function parameter or member 'link' not described in 'ata_tlink_delete'
drivers/ata/libata-transport.c:384: warning: Excess function parameter 'port' description in 'ata_tlink_delete'
drivers/ata/libata-transport.c:640: warning: Function parameter or member 'ata_dev' not described in 'ata_tdev_delete'
drivers/ata/libata-transport.c:640: warning: Excess function parameter 'port' description in 'ata_tdev_delete'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The return value of ata_qc_from_tag() is checked in the whole
kernel except for two calls in sata_dwc_isr(), which may lead
to null-pointer-dereference. Add return value checks to avoid
such case.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SATA controller used in Xilinx ZynqMP platform uses xilinx GT phy
which has 4 GT lanes and can be used by 4 peripherals at a time.
SATA controller uses 1 GT phy lane among the 4 GT lanes. To configure
the GT lane for the SATA controller, the below sequence is expected.
1. Assert the SATA controller reset.
2. Configure the xilinx GT phy lane for SATA controller (phy_init).
3. De-assert the SATA controller reset.
4. Wait for PLL of the GT lane used by SATA to be locked (phy_power_on).
The ahci_platform_enable_resources() by default does the phy_init()
and phy_power_on() but the default sequence doesn't work with Xilinx
platforms. Because of this reason, updated the driver to support the
new sequence.
Added cevapriv->rst check, for backward compatibility with the older
sequence. If the reset controller is not available, then the SATA
controller will configure with the older sequences.
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.
Fixes: c0cdf2ac4b ("ata: ahci_brcm: Fix AHCI resources management")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=5BZ7
-----END PGP SIGNATURE-----
Merge tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block
Pull libata fix from Jens Axboe:
"Single fix for an old regression with sata_nv"
* tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
ata: sata_nv: Fix retrieving of active qcs
ata_qc_complete_multiple() has to be called with the tags physically
active, that is the hw tag is at bit 0. ap->qc_active has the same tag
at bit ATA_TAG_INTERNAL instead, so call ata_qc_get_active() to fix that
up. This is done in the vein of 8385d756e1 ("libata: Fix retrieving of
active qcs").
Fixes: 28361c4036 ("libata: add extra internal command")
Tested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull more parisc updates from Helge Deller:
- During this merge window O_NONBLOCK was changed to become 000200000,
but we missed that the syscalls timerfd_create(), signalfd4(),
eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
bit-wise check of the flags parameter.
To provide backward compatibility with existing userspace we
introduce parisc specific wrappers for those syscalls which filter
out the old O_NONBLOCK value and replaces it with the new one.
- Prevent HIL bus driver to get stuck when keyboard or mouse isn't
attached
- Improve error return codes when setting rtc time
- Minor documentation fix in pata_ns87415.c
* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
ata: pata_ns87415.c: Document support on parisc with superio chip
parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
hil/parisc: Disable HIL driver when it gets stuck
parisc: Improve error return codes when setting rtc time
I tested this driver on my HP PA-RISC C3000 workstation and it does
work with the built-in TEAC CD-532E-B CD-ROM drive.
So drop the TODO item and adjust the file header.
Signed-off-by: Helge Deller <deller@gmx.de>
Some functions have different names between their prototypes
and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before commit 9495b7e92f ("driver core: platform: Initialize
dma_parms for platform devices"), the R-Car SATA device didn't have DMA
parameters. Hence the DMA boundary mask supplied by its driver was
silently ignored, as __scsi_init_queue() doesn't check the return value
of dma_set_seg_boundary(), and the default value of 0xffffffff was used.
Now the device has gained DMA parameters, the driver-supplied value is
used, and the following warning is printed on Salvator-XS:
DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300
(the range of start/end values depend on whether IOMMU support is
enabled or not)
The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
any typical end value, which is odd, will trigger the check.
Fix this by increasing the DMA boundary value by 1.
This also fixes the following WRITE DMA EXT timeout issue:
# dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: WRITE DMA EXT
ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
as seen by Shimoda-san since commit 429120f3df ("block: fix
splitting segments on boundary masks").
Fixes: 8bfbeed586 ("sata_rcar: correct 'sata_rcar_sht'")
Fixes: 9495b7e92f ("driver core: platform: Initialize dma_parms for platform devices")
Fixes: 429120f3df ("block: fix splitting segments on boundary masks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Older ATF does not provide SMC call for SATA phy power on functionality and
therefore initialization of ahci_mvebu is failing when older version of ATF
is using. In this case phy_power_on() function returns -EOPNOTSUPP.
This patch adds a new hflag AHCI_HFLAG_IGN_NOTSUPP_POWER_ON which cause
that ahci_platform_enable_phys() would ignore -EOPNOTSUPP errors from
phy_power_on() call.
It fixes initialization of ahci_mvebu on Espressobin boards where is older
Marvell's Arm Trusted Firmware without SMC call for SATA phy power.
This is regression introduced in commit 8e18c8e58d ("arm64: dts: marvell:
armada-3720-espressobin: declare SATA PHY property") where SATA phy was
defined and therefore ahci_platform_enable_phys() on Espressobin started
failing.
Fixes: 8e18c8e58d ("arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property")
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Cc: <stable@vger.kernel.org> # 5.1+: ea17a0f153: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
Signed-off-by: Jens Axboe <axboe@kernel.dk>
