drm: Return -ENOTTY for non-drm ioctls
Return -ENOTTY from drm_ioctl() when userspace passes in a cmd number
which doesn't relate to the drm subsystem.
Glibc uses the TCGETS ioctl to implement isatty(), and without this
change isatty() returns it incorrectly returns true for drm devices.
To test run this command:
$ if [ -t 0 ]; then echo is a tty; fi < /dev/dri/card0
which shows "is a tty" without this patch.
This may also modify memory which the userspace application is not
expecting.
Signed-off-by: Charles Baylis <cb-kernel@fishzet.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YPG3IBlzaMhfPqCr@stando.fishzet.co.uk
We were getting a depmod error:
depmod: ERROR: Cycle detected: drm_kms_helper -> drm -> drm_kms_helper
It looks like the rule is that drm_kms_helper can call into drm, but
drm can't call into drm_kms_helper. That means we've got to move the
DP AUX backlight support into drm_dp_helper.
NOTE: as part of this, I didn't try to do any renames of the main
registration function. Even though it's in the drm_dp_helper, it still
feels very parallel to drm_panel_of_backlight().
Fixes: 10f7b40e4f ("drm/panel: add basic DP AUX backlight support")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rajeev Nandan <rajeevny@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712075933.v2.1.I23eb4cc5a680341e7b3e791632a635566fa5806a@changeid
Some panels support backlight control over DP AUX channel using
VESA's standard backlight control interface.
Using new DRM eDP backlight helpers, add support to create and
register a backlight for those panels in drm_panel to simplify
the panel drivers.
The panel driver with access to "struct drm_dp_aux" can create and
register a backlight device using following code snippet in its
probe() function:
err = drm_panel_dp_aux_backlight(panel, aux);
if (err)
return err;
Then drm_panel will handle backlight_(enable|disable) calls
similar to the case when drm_panel_of_backlight() is used.
Currently, we are not supporting one feature where the source
device can combine the backlight brightness levels set through
DP AUX and the BL_PWM_DIM eDP connector pin. Since it's not
required for the basic backlight controls, it can be added later.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[dianders: added blank line for warning when applying]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-2-git-send-email-rajeevny@codeaurora.org
There's a bunch of atomic drivers who don't do this quite correctly,
luckily most of them aren't in wide use or people would have noticed
the tearing.
By making this the default we avoid the constant audit pain and can
additionally remove a ton of lines from vfuncs for a bit more clarity
in smaller drivers.
While at it complain if there's a cleanup_fb hook but no prepare_fb
hook, because that makes no sense. I haven't found any driver which
violates this, but better safe than sorry.
Subsequent patches will reap the benefits.
v2: It's neither ... nor, not not (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210623162200.3372056-1-daniel.vetter@ffwll.ch
The drm_connector detect, drm_dp_aux transfer and mipi_dsi_host
operations typically require to access their underlying device to
perform what is expected of them.
However, there's no guarantee on the fact that the device has been
enabled through atomic_enable or similar that will usually power the
device. The access to an unpowered device is then an undefined behaviour
ranging from the access being ignored to a hard CPU hang.
Let's document that expectation to avoid as much as possible those
consequences.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616141529.630719-3-maxime@cerno.tech
[WHY]
SCR for DP 2.0 spec says that multiple LTTPRs must not be accessed in a
single AUX transaction.
There may be other places in future where breaking up AUX accesses is
necessary.
[HOW]
Partition the entire DPCD address space into blocks. When an incoming AUX
request spans multiple blocks, break up the request into multiple requests.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc and drm-intel pull request for topic/i915-ttm:
- Convert i915 lmem handling to ttm.
- Add a patch to temporarily add a driver_private member to vma_node.
- Use this to allow mixed object mmap handling for i915.
Since we're about to implement eDP backlight support in nouveau using the
standard protocol from VESA, we might as well just take the code that's
already written for this and move it into a set of shared DRM helpers.
Note that these helpers are intended to handle DPCD related backlight
control bits such as setting the brightness level over AUX, probing the
backlight's TCON, enabling/disabling the backlight over AUX if supported,
etc. Any PWM-related portions of backlight control are explicitly left up
to the driver, as these will vary from platform to platform.
The only exception to this is the calculation of the PWM frequency
pre-divider value. This is because the only platform-specific information
required for this is the PWM frequency of the panel, which the driver is
expected to provide if available. The actual algorithm for calculating this
value is standard and is defined in the eDP specification from VESA.
Note that these helpers do not yet implement the full range of features
the VESA backlight interface provides, and only provide the following
functionality (all of which was already present in i915's DPCD backlight
support):
* Basic control of brightness levels
* Basic probing of backlight capabilities
* Helpers for enabling and disabling the backlight
v3:
* Split out changes to i915's backlight code to separate patches to make it
easier to review
v4:
* Style/spelling changes from Thomas Zimmermann
v5:
* Start using new drm_dbg_*() functions
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-9-lyude@redhat.com
The internal ttm_bo_util memcpy uses ioremap functionality, and while it
probably might be possible to use it for copying in- and out of
sglist represented io memory, using io_mem_reserve() / io_mem_free()
callbacks, that would cause problems with fault().
Instead, implement a method mapping page-by-page using kmap_local()
semantics. As an additional benefit we then avoid the occasional global
TLB flushes of ioremap() and consuming ioremap space, elimination of a
critical point of failure and with a slight change of semantics we could
also push the memcpy out async for testing and async driver development
purposes.
A special linear iomem iterator is introduced internally to mimic the
old ioremap behaviour for code-paths that can't immediately be ported
over. This adds to the code size and should be considered a temporary
solution.
Looking at the code we have a lot of checks for iomap tagged pointers.
Ideally we should extend the core memremap functions to also accept
uncached memory and kmap_local functionality. Then we could strip a
lot of code.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210602083818.241793-4-thomas.hellstrom@linux.intel.com
Add description for parameters for
for_each_new_plane_in_state_reverse to fix warnings:
include/drm/drm_atomic.h:908: warning: Function parameter or member '__state' not described in 'for_each_new_plane_in_state_reverse'
include/drm/drm_atomic.h:908: warning: Function parameter or member 'plane' not described in 'for_each_new_plane_in_state_reverse'
include/drm/drm_atomic.h:908: warning: Function parameter or member 'new_plane_state' not described in 'for_each_new_plane_in_state_reverse'
include/drm/drm_atomic.h:908: warning: Function parameter or member '__i' not described in 'for_each_new_plane_in_state_reverse'
Fixes: a6c3c37b66 ("drm/amd/display: fix gcc set but not used warning of variable 'old_plane_state'")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.14-2021-06-02:
amdgpu:
- GC/MM register access macro clean up for SR-IOV
- Beige Goby updates
- W=1 Fixes
- Aldebaran fixes
- Misc display fixes
- ACPI ATCS/ATIF handling rework
- SR-IOV fixes
- RAS fixes
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes for suspend/resume
- More buffer object subclassing work
- Add new INFO query for additional vbios information
- Add new placement for preemptable SG buffers
amdkfd:
- Misc fixes
radeon:
- W=1 Fixes
- Misc cleanups
UAPI:
- Add new INFO query for additional vbios information
Useful for debugging vbios related issues. Proposed umr patch:
https://patchwork.freedesktop.org/patch/433297/
- 16bpc fixed point format support
IGT test:
https://lists.freedesktop.org/archives/igt-dev/2021-May/031507.html
Proposed Vulkan patch:
a25d480207
- Add a new GEM flag which is only used internally in the kernel driver. Userspace
is not allowed to set it.
drm:
- 16bpc fixed point format fourcc
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602214009.4553-1-alexander.deucher@amd.com
define a new macro for_each_new_plane_in_state_reverse to replace
for_each_oldnew_plane_in_state_reverse, so that the unused variable
'old_plane_state' can be removed.
Fix gcc warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:10066:26: warning:
variable ‘old_plane_state’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Link rate in kHz is what is eventually required to calculate the link
bandwidth, which makes kHz a more generic unit. This should also make
forward-compatibility with new DP standards easier.
[how]
- Replace 'link rate DPCD code' with 'link rate in kHz' when used with
drm_dp_mst_topology_mgr_init()
- Add/remove related DPCD code conversion from/to kHz where applicable
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512210011.8425-2-nikola.cornij@amd.com
This function can be used by drivers that use damage clips and have
CMA GEM objects backed by non-coherent memory. Calling this function
in a plane's .atomic_update ensures that all the data in the backing
memory have been written to RAM.
v3: - Only sync data if using GEM objects backed by non-coherent memory.
- Use a drm_device pointer instead of device pointer in prototype
v5: - Rename to drm_fb_cma_sync_non_coherent
- Invert loops for better cache locality
- Only sync BOs that have the non-coherent flag
- Move to drm_fb_cma_helper.c to avoid circular dependency
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210523170415.90410-3-paul@crapouillou.net
Having GEM buffers backed by non-coherent memory is interesting in the
particular case where it is faster to render to a non-coherent buffer
then sync the data cache, than to render to a write-combine buffer, and
(by extension) much faster than using a shadow buffer. This is true for
instance on some Ingenic SoCs, where even simple blits (e.g. memcpy)
are about three times faster using this method.
Add a 'map_noncoherent' flag to the drm_gem_cma_object structure, which
can be set by the drivers when they create the dumb buffer.
Since this really only applies to software rendering, disable this flag
as soon as the CMA objects are exported via PRIME.
v3: New patch. Now uses a simple 'map_noncoherent' flag to control how
the objects are mapped, and use the new dma_mmap_pages function.
v4: Make sure map_noncoherent is always disabled when creating GEM
objects meant to be used with dma-buf.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210523170415.90410-2-paul@crapouillou.net
Core Changes:
- drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose).
Driver Changes:
- Display plane clock rates fixes and improvements (Ville).
- Uninint DMC FW loader state during shutdown (Imre).
- Convert snprintf to sysfs_emit (Xuezhi).
- Fix invalid access to ACPI _DSM objects (Takashi).
- A big refactor around how i915 addresses the graphics
and display IP versions. (Matt, Lucas).
- Backlight fix (Lyude).
- Display watermark and DBUF fixes (Ville).
- HDCP fix (Anshuman).
- Improve cases where display is not available (Jose).
- Defeature PSR2 for RKL and ALD-S (Jose).
- VLV DSI panel power fixes and improvements (Hans).
- display-12 workaround (Jose).
- Fix modesetting (Imre).
- Drop redundant address-of op before lttpr_common_caps array (Imre).
- Fix compiler checks (Jose, Jason).
- GLK display fixes (Ville).
- Fix error code returns (Dan).
- eDP novel: back again to slow and wide link training everywhere (Kai-Heng).
- Abstract DMC FW path (Rodrigo).
- Preparation and changes for upcoming
XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh).
- Fix comment typo in DSI code (zuoqilin).
- Simplify CCS and UV plane alignment handling (Imre).
- PSR Fixes on TGL (Gwan-gyeong, Jose).
- Add intel_dp_hdcp.h and rename init (Jani).
- Move crtc and dpll declarations around (Jani).
- Fix pre-skl DP AUX precharge length (Ville).
- Remove stray newlines from random files (Ville).
- crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville).
- Add frontbuffer tracking tracepoints (Ville).
- ADL-S PCI ID updates (Anand).
- Use unique backlight device names (Jani).
- A few clean-ups on i915/audio (Jani).
- Use intel_framebuffer instead of drm one on intel_fb functions (Imre).
- Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre).
- Nuke display error state (Ville).
- ADL-P initial enablement patches
starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika).
- Display clean-up around VBT and the strap bits (Lucas).
- Try YCbCr420 color when RGB fails (Werner).
- More PSR fixes and improvements (Jose).
- Other generic display code clean-up (Jose, Ville).
- Use correct downstream caps for check Src-Ctl mode for PCON (Ankit).
- Disable HiZ Raw Stall Optimization on broken gen7 (Simon).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YKVioeu0JkUAlR7y@intel.com
On device removal reroute all CPU mappings to dummy page.
v3:
Remove loop to find DRM file and instead access it
by vma->vm_file->private_data. Move dummy page installation
into a separate function.
v4:
Map the entire BOs VA space into on demand allocated dummy page
on the first fault for that BO.
v5: Remove duplicate return.
v6: Polish ttm_bo_vm_dummy_page, remove superfluous code.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-2-andrey.grodzovsky@amd.com
