Some functions defined in 'arch/powerpc/mm' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-4-nick.child@ibm.com
Today we have the following IBATs allocated:
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m
4: 0xc0780000-0xc079ffff 0x00780000 128K Kernel x m
5: 0xc07a0000-0xc07bffff 0x007a0000 128K Kernel x m
6: -
7: -
The two 128K should be a single 256K instead.
When _etext is not aligned to 128Kbytes, the system will allocate
all necessary BATs to the lower 128Kbytes boundary, then allocate
an additional 128Kbytes BAT for the remaining block.
Instead, align the top to 128Kbytes so that the function directly
allocates a 256Kbytes last block:
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m
4: 0xc0780000-0xc07bffff 0x00780000 256K Kernel x m
5: -
6: -
7: -
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ab58b296832b0ec650e2203200e060adbcb2677d.1637930421.git.christophe.leroy@csgroup.eu
Calling 'mfsr' to get the content of segment registers is heavy,
in addition it requires clearing of the 'reserved' bits.
In order to avoid this operation, save it in mm context and in
thread struct.
The saved sr0 is the one used by kernel, this means that on
locking entry it can be used as is.
For unlocking, the only thing to do is to clear SR_NX.
This improves null_syscall selftest by 12 cycles, ie 4%.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b02baf2ed8f09bad910dfaeeb7353b2ae6830525.1634627931.git.christophe.leroy@csgroup.eu
When interrupt and syscall entries where converted to C, KUEP locking
and unlocking was also converted. It improved performance by unrolling
the loop, and allowed easily implementing boot time deactivation of
KUEP.
However, null_syscall selftest shows that KUEP is still heavy
(361 cycles with KUEP, 212 cycles without).
A way to improve more is to group 'mtsr's together, instead of
repeating 'addi' + 'mtsr' several times.
In order to do that, more registers need to be available. In C, GCC
will always be able to provide the requested number of registers, but
at the cost of saving some data on the stack, which is counter
performant here.
So let's do it in assembly, when we have full control of which
register can be used. It also has the advantage of locking earlier
and unlocking later and it helps GCC generating less tricky code.
The only drawback is to make boot time deactivation less straight
forward and require 'hand' instruction patching.
Group 'mtsr's by 4.
With this change, null_syscall selftest reports 336 cycles. Without
the change it was 361 cycles, that's a 7% reduction.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/115cb279e9b9948dfd93a065e047081c59e3a2a6.1634627931.git.christophe.leroy@csgroup.eu
KUEP implements the update of user segment registers.
Move it into mmu-hash.h in order to use it from other places.
And inline kuep_lock() and kuep_unlock(). Inlining kuep_lock() is
important for system_call_exception(), otherwise system_call_exception()
has to save into stack the system call parameters that are used just
after, and doing that takes more instructions than kuep_lock() itself.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24591ca480d14a62ef910e38a5273d551262c4a2.1622708530.git.christophe.leroy@csgroup.eu
Function names should tell what the function does, not how.
mfsrin() and mtsrin() are read/writing segment registers.
They are called that way because they are using mfsrin and mtsrin
instructions, but it doesn't matter for the caller.
In preparation of following patch, change their name to mfsr() and mtsr()
in order to make it obvious they manipulate segment registers without
messing up with how they do it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f92d99f4349391b77766745900231aa880a0efb5.1612612022.git.christophe.leroy@csgroup.eu
On hash 32 bits, handling minor protection faults like unsetting
dirty flag is heavy if done from the normal page_fault processing,
because it implies hash table software lookup for flushing the entry
and then a DSI is taken anyway to add the entry back.
When KUAP was implemented, as explained in commit a68c31fc01
("powerpc/32s: Implement Kernel Userspace Access Protection"),
protection faults has been diverted from hash_page() because
hash_page() was not able to identify a KUAP fault.
Implement KUAP verification in hash_page(), by clearing write
permission when the access is a kernel access and Ks is 1.
This works regardless of the address because kernel segments always
have Ks set to 0 while user segments have Ks set to 0 only
when kernel write to userspace is granted.
Then protection faults can be handled by hash_page() even for KUAP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8a4ffe4798e9ea32aaaccdf85e411bb1beed3500.1605542955.git.christophe.leroy@csgroup.eu
At the time being, an early hash table is set up when
CONFIG_KASAN is selected.
There is nothing wrong with setting such an early hash table
all the time, even if it is not used. This is a statically
allocated 256 kB table which lies in the init data section.
This makes the code simpler and may in the future allow to
setup early IO mappings with fixmap instead of hard coding BATs.
Put create_hpte() and flush_hash_pages() in the .ref.text section
in order to avoid warning for the reference to early_hash[]. This
reference is removed by MMU_init_hw_patch() before init memory is
freed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b8f8101c368b8a6451844a58d7bd7d83c14cf2aa.1601566529.git.christophe.leroy@csgroup.eu
