Our current MIPS platform `__div64_32' handler is inactive, because it
is incorrectly only enabled for 64-bit configurations, for which generic
`do_div' code does not call it anyway.
The handler is not suitable for being called from there though as it
only calculates 32 bits of the quotient under the assumption the 64-bit
divident has been suitably reduced. Code for such reduction used to be
there, however it has been incorrectly removed with commit c21004cd5b
("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should
have only updated an obsoleted constraint for an inline asm involving
$hi and $lo register outputs, while possibly wiring the original MIPS
variant of the `do_div' macro as `__div64_32' handler for the generic
`do_div' implementation
Correct the handler as follows then:
- Revert most of the commit referred, however retaining the current
formatting, except for the final two instructions of the inline asm
sequence, which the original commit missed. Omit the original 64-bit
parts though.
- Rename the original `do_div' macro to `__div64_32'. Use the combined
`x' constraint referring to the MD accumulator as a whole, replacing
the original individual `h' and `l' constraints used for $hi and $lo
registers respectively, of which `h' has been obsoleted with GCC 4.4.
Update surrounding code accordingly.
We have since removed support for GCC versions before 4.9, so no need
for a special arrangement here; GCC has supported the `x' constraint
since forever anyway, or at least going back to 1991.
- Rename the `__base' local variable in `__div64_32' to `__radix' to
avoid a conflict with a local variable in `do_div'.
- Actually enable this code for 32-bit rather than 64-bit configurations
by qualifying it with BITS_PER_LONG being 32 instead of 64. Include
<asm/bitsperlong.h> for this macro rather than <linux/types.h> as we
don't need anything else.
- Finally include <asm-generic/div64.h> last rather than first.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0668s and 0.2629s from 2.1529s
and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
For a reference 64-bit `do_div' code where we have the DDIVU instruction
available to do the whole calculation right away averages at 0.0660s for
the latter CPU.
Fixes: c21004cd5b ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.")
Reported-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.30+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This mostly reverts commit 99bca615d8 ("MIPS: pci-legacy: use generic
pci_enable_resources"). Fixes regressions such as:
ata_piix 0000:00:0a.1: can't enable device: BAR 0 [io 0x01f0-0x01f7] not
claimed
ata_piix: probe of 0000:00:0a.1 failed with error -22
The only changes from the strict revert are to fix checkpatch errors:
ERROR: spaces required around that '=' (ctx:VxV)
#33: FILE: arch/mips/pci/pci-legacy.c:252:
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
^
ERROR: do not use assignment in if condition
#67: FILE: arch/mips/pci/pci-legacy.c:284:
+ if ((err = pcibios_enable_resources(dev, mask)) < 0)
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If there is no mac address passed via platform data try to get it via
device tree and fall back to a random mac address, if all fail.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get rid of access to struct korina_device by just passing the mac
address via platform data and use drvdata for passing netdev to remove
function.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yank out the hva-based MMU notifier APIs now that all architectures that
use the notifiers have moved to the gfn-based APIs.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210402005658.3024832-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move MIPS to the gfn-based MMU notifier APIs, which do the hva->gfn
lookup in common code, and whose code is nearly identical to MIPS'
lookup.
No meaningful functional change intended, though the exact order of
operations is slightly different since the memslot lookups occur before
calling into arch code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210402005658.3024832-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return 1 from kvm_unmap_hva_range and kvm_set_spte_hva if a flush is
needed, so that the generic code can coalesce the flushes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since all calls to kvm_flush_remote_tlbs must be preceded by
kvm_mips_callbacks->prepare_flush_shadow, repurpose
kvm_arch_flush_remote_tlb to invoke it. This makes it possible
to use the TLB flushing mechanism provided by the generic MMU
notifier code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both trap-and-emulate and VZ have a single implementation that covers
both .flush_shadow_all and .flush_shadow_memslot, and both of them end
with a call to kvm_flush_remote_tlbs.
Unify the callbacks into one and extract the call to kvm_flush_remote_tlbs.
The next patches will pull it further out of the the architecture-specific
MMU notifier functions kvm_unmap_hva_range and kvm_set_spte_hva.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the prototypes for the MMU notifier callbacks out of arch code and
into common code. There is no benefit to having each arch replicate the
prototypes since any deviation from the invocation in common code will
explode.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kexec/kdump support for Loongson64 by:
1, Provide Loongson-specific kexec functions: loongson_kexec_prepare(),
loongson_kexec_shutdown() and loongson_crash_shutdown();
2, Provide Loongson-specific assembly code in kexec_smp_wait();
To start Loongson64, The boot CPU needs 3 parameters:
fw_arg0: the number of arguments in cmdline (i.e., argc).
fw_arg1: structure holds cmdline such as "root=/dev/sda1 console=tty"
(i.e., argv).
fw_arg2: environment (i.e., envp, additional boot parameters from LEFI).
Non-boot CPUs do not need one parameter as the IPI mailbox base address.
They query their own IPI mailbox to get PC, SP and GP in a loopi, until
the boot CPU brings them up.
loongson_kexec_prepare(): Setup cmdline for kexec/kdump. The kexec/kdump
cmdline comes from kexec's "append" option string. This structure will
be parsed in fw_init_cmdline() of arch/mips/fw/lib/cmdline.c. Both image
->control_code_page and the cmdline need to be in a safe memory region
(memory allocated by the old kernel may be corrupted by the new kernel).
In order to maintain compatibility for the old firmware, the low 2MB is
reserverd and safe for Loongson. So let KEXEC_CTRL_CODE and KEXEC_ARGV_
ADDR be here. LEFI parameters may be corrupted at runtime, so backup it
at mips_reboot_setup(), and then restore it at loongson_kexec_shutdown()
/loongson_crash_shutdown().
loongson_kexec_shutdown(): Wake up all present CPUs and let them go to
reboot_code_buffer. Pass the kexec parameters to kexec_args.
loongson_crash_shutdown(): Pass the kdump parameters to kexec_args.
The assembly part in kexec_smp_wait provide a routine as BIOS does, in
order to keep secondary CPUs in a querying loop.
The layout of low 2MB memory in our design:
0x80000000, the first MB, the first 64K, Exception vectors
0x80010000, the first MB, the second 64K, STR (suspend) data
0x80020000, the first MB, the third and fourth 64K, UEFI HOB
0x80040000, the first MB, the fifth 64K, RT-Thread for SMC
0x80100000, the second MB, the first 64K, KEXEC code
0x80108000, the second MB, the second 64K, KEXEC data
Cc: Eric Biederman <ebiederm@xmission.com>
Tested-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Follow the reasoning from commit 842de40d93 ("PCI: add generic
pci_enable_resources()"):
The only functional difference from the MIPS version is that the
generic one uses "!r->parent" to check for resource collisions
instead of "!r->start && r->end".
That should have no effect on any pci-legacy driver.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
No drivers set the busn_resource field in the pci_controller struct.
Commit 7ee214b540 ("MIPS: PCI: Remove unused busn_offset") almost
removed it over 3 years ago. Remove it for good to free up memory and
eliminate messages like:
pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove the following pci-legacy message:
PCI host bridge /pci@440000/host-bridge ranges:
MEM 0x0000000020000000..0x000000002fffffff
IO 0x0000000000460000..0x000000000046ffff
It is followed shortly by the same data from pci_register_host_bridge:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
pci_bus 0000:00: root bus resource [io 0x460000-0x46ffff]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Mirror commit aeba3731b1 ("powerpc/pci: Fix IO space breakage after
of_pci_range_to_resource() change").
Most MIPS platforms do not define PCI_IOBASE, nor implement
pci_address_to_pio(). Moreover, IO_SPACE_LIMIT is 0xffff for most MIPS
platforms. of_pci_range_to_resource passes the _start address_ of the IO
range into pci_address_to_pio, which then checks it against
IO_SPACE_LIMIT and fails, because for MIPS platforms that use
pci-legacy (pci-lantiq, pci-rt3883, pci-mt7620), IO ranges start much
higher than 0xffff.
In fact, pci-mt7621 in staging already works around this problem, see
commit 09dd629eea ("staging: mt7621-pci: fix io space and properly set
resource limits")
So just stop using of_pci_range_to_resource, which does not work for
MIPS.
Fixes PCI errors like:
pci_bus 0000:00: root bus resource [io 0xffffffff]
Fixes: 0b0b0893d4 ("of/pci: Fix the conversion of IO ranges into IO resources")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Existing strings do not make sense: one is always NULL and the other
refers to the wrong parent node.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Mirror pci-rt3883 fix from commit e5067c718b ("MIPS: pci-rt3883:
Remove odd locking in PCI config space access code"). pci-rt2880 shares
the driver layout with pci-rt3883 and the same reasons apply.
Caller (generic PCI code) already does proper locking, so no need to add
another one here. Local PCI read/write functions are never called
simultaneously, also they do not require synchronization with the PCI
controller ops, since they are used before the controller registration.
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
pci_fixup_irqs() used to call pcibios_map_irq on every PCI device, which
for RT2880 included bus 0 slot 0. After pci_fixup_irqs() got removed,
only slots/funcs with devices attached would be called. While arguably
the right thing, that left no chance for this driver to ever initialize
slot 0, effectively bricking PCI and USB on RT2880 devices such as the
Belkin F5D8235-4 v1.
Slot 0 configuration needs to happen after PCI bus enumeration, but
before any device at slot 0x11 (func 0 or 1) is talked to. That was
determined empirically by testing on a Belkin F5D8235-4 v1 device. A
minimal BAR 0 config write followed by read, then setting slot 0
PCI_COMMAND to MASTER | IO | MEMORY is all that seems to be required for
proper functionality.
Tested by ensuring that full- and high-speed USB devices get enumerated
on the Belkin F5D8235-4 v1 (with an out of tree DTS file from OpenWrt).
Fixes: 04c81c7293 ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tobias Wolf <dev-NTEO@vplace.de>
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 04324f44cb ("MIPS: Remove get_fs/set_fs") changed the access_ok
for strnlen_user to check the whole range, which broke some callers
of strndup_user(). Restore the old behaviour and just check the first byte.
Fixes: 04324f44cb ("MIPS: Remove get_fs/set_fs")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The MIPS implementation of access_ok() incorrectly reports that access
to the final byte of user memory is not OK, much as the alpha & SH
versions did prior to commit 94bd8a05cd ("Fix 'acccess_ok()' on alpha
and SH").
For example on a MIPS64 system with __UA_LIMIT == 0xffff000000000000 we
incorrectly fail in the following cases:
access_ok(0xffffffffffff, 0x1) = 0
access_ok(0xfffffffffffe, 0x2) = 0
Fix MIPS in the same way as alpha & SH, by subtracting one from the addr
+ size condition when size is non-zero. With this the access_ok() calls
above return 1 indicating that the access may be valid.
The cost of the improved check is pretty minimal - we gain 2410 bytes,
or 0.03%, in kernel code size for a 64r6el_defconfig kernel built using
GCC 8.1.0.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Vendor listed for mediatek in kernel vendor file 'vendor-prefixes.yaml'
contains 'mediatek' as a valid vendor string. Some nodes in the device
tree are using an invalid vendor string vfor 'mtk' instead. Fix all of
them in dts file. Update also ralink mt7621 related code to properly
match new strings. Even there are used in the device tree there are
some strings that are not referred anywhere but have been also updated
with new vendor name. These are 'mtk,mt7621-wdt', 'mtk,mt7621-nand',
'mtk,mt7621-mc', and 'mtk,mt7621-cpc'.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210410055059.13518-4-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lifu Chen <chenlifu@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With the latest mkimage from U-Boot 2021.04, the generic defconfigs no
longer build, failing with:
/usr/bin/mkimage: verify_header failed for FIT Image support with exit code 1
This is expected after the linked U-Boot commits because '@' is
forbidden in the node names due to the way that libfdt treats nodes with
the same prefix but different unit addresses.
Switch the '@' in the node name to '-'. Drop the unit addresses from the
hash and kernel child nodes because there is only one node so they do
not need to have a number to differentiate them.
Cc: stable@vger.kernel.org
Link: 79af75f777
Link: 3f04db891a
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Clean up macros even further after removal get_fs/set_fs.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cavium Octeon has its own memcpy implementation and also need the change
done in commit 04324f44cb ("MIPS: Remove get_fs/set_fs").
Fixes: 04324f44cb ("MIPS: Remove get_fs/set_fs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 45deb5faeb ("MIPS: uaccess: Remove get_fs/set_fs call sites")
caused a few new sparse warnings, fix them.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the generic irq_domain_simple_ops structure instead of
a home-grown one.
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Loongson64 processors have a writecombine issue that maybe failed to
write back framebuffer used with ATI Radeon or AMD GPU at times, after
commit 8a08e50cee ("drm: Permit video-buffers writecombine mapping
for MIPS"), there exists some errors such as blurred screen and lockup,
and so on.
[ 60.958721] radeon 0000:03:00.0: ring 0 stalled for more than 10079msec
[ 60.965315] radeon 0000:03:00.0: GPU lockup (current fence id 0x0000000000000112 last fence id 0x000000000000011d on ring 0)
[ 60.976525] radeon 0000:03:00.0: ring 3 stalled for more than 10086msec
[ 60.983156] radeon 0000:03:00.0: GPU lockup (current fence id 0x0000000000000374 last fence id 0x00000000000003a8 on ring 3)
As discussed earlier [1], it might be better to disable writecombine
on the CPU detection side because the root cause is unknown now.
Actually, this patch is a temporary solution to just make it work well,
it is not a proper and final solution, I hope someone will have a better
solution to fix this issue in the future.
[1] https://lore.kernel.org/patchwork/patch/1285542/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All get_fs/set_fs calls in MIPS code are gone, so remove implementation
of it. With the clear separation of user/kernel space access we no
longer need the EVA special handling, so get rid of that, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use new helpers to access user/kernel for functions, which are used with
user/kernel pointers. Instead of dealing with get_fs/set_fs select
user/kernel access via parameter.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Added __get/__put_kernel_nofault as preparation for removing
get/set_fs.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
flush_icache_range always does flush kernel address ranges, so no
need to do the set_fs dance.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Provide hooks to intercept bad usages of virt_to_phys() and
__pa_symbol() throughout the kernel. To make this possible, we need to
rename the current implement of virt_to_phys() into
__virt_to_phys_nodebug() and wrap it around depending on
CONFIG_DEBUG_VIRTUAL.
A similar thing is needed for __pa_symbol() which is now aliased to
__phys_addr_symbol() whose implementation is either the direct return of
RELOC_HIDE or goes through the debug version.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
gcc-11 points out a mismatch between the declaration and the definition
of poly1305_core_setkey():
lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
| ~~~~~~~~~^~~~~~~~~~~
In file included from lib/crypto/poly1305-donna32.c:11:
include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
This is harmless in principle, as the calling conventions are the same,
but the more specific prototype allows better type checking in the
caller.
Change the declaration to match the actual function definition.
The poly1305_simd_init() is a bit suspicious here, as it previously
had a 32-byte argument type, but looks like it needs to take the
16-byte POLY1305_BLOCK_SIZE array instead.
Fixes: 1c08a10436 ("crypto: poly1305 - add new 32 and 64-bit generic versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The TODO file here has not been updated for 15 years, and the function
development described in the file have been implemented or abandoned.
Its existence will mislead developers seeking to view outdated information.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TODO file here has not been updated for 15 years, and the function
development described in the file have been implemented or abandoned.
Its existence will mislead developers seeking to view outdated information.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With ath79_defconfig enabling CONFIG_MIPS_ELF_APPENDED_DTB gives a
compilation error. This patch fixes it.
Build log:
...
CC kernel/locking/percpu-rwsem.o
../arch/mips/kernel/setup.c:46:39: error: conflicting types for
'__appended_dtb'
const char __section(".appended_dtb") __appended_dtb[0x100000];
^~~~~~~~~~~~~~
In file included from ../arch/mips/kernel/setup.c:34:
../arch/mips/include/asm/bootinfo.h:118:13: note: previous declaration
of '__appended_dtb' was here
extern char __appended_dtb[];
^~~~~~~~~~~~~~
CC fs/attr.o
make[4]: *** [../scripts/Makefile.build:271: arch/mips/kernel/setup.o]
Error 1
...
Root cause seems to be:
Fixes: b83ba0b9df ("MIPS: of: Introduce helper function to get DTB")
Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: trivial@kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When using the Loongson-3A4000 machine for serial port debugging,
there is no /dev/ttyUSB* output, which makes the serial port unavailable,
For convenience, we open this configuration.
zhangqing@loongson-pc:~$ cat /sys/firmware/lefi/boardinfo
Board Info
Manufacturer : THTF
Board Name : THTF-LS3A4000-7A1000-ML4A
Family : LOONGSON3
BIOS Info
Vendor : ZD tech
Version : ZD tech-V2.1.1
ROM Size : 4 KB
Release Date : 2020-06-29
zhangqing@loongson-pc:~$ lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 005 Device 002: ID 0c45:760b Microdia USB Keyboard
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
