With 'unevaluatedProperties' support implemented, there's a number of
warnings from the Designware PCIe based bindings:
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dt.yaml: pcie@1ffc000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'device_type', 'bus-range', 'ranges', '#interrupt-cells', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dt.yaml: pcie@1ffc000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f4000000: Unevaluated properties are not allowed ('bus-range', '#address-cells', '#size-cells', 'device_type', 'ranges', 'num-lanes', '#interrupt-cells', 'interrupts', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'clocks', 'clock-names' were unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f4000000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f5000000: Unevaluated properties are not allowed ('bus-range', '#address-cells', '#size-cells', 'device_type', 'phys', 'ranges', 'num-lanes', '#interrupt-cells', 'interrupts', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'reset-gpios', 'pcie@0,0' were unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f5000000: Unevaluated properties are not allowed ('phys', 'hisilicon,clken-gpios' were unexpected)
Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml: pcie@d0e00000: Unevaluated properties are not allowed ('device_type', '#address-cells', '#size-cells', 'linux,pci-domain', 'bus-range', '#interrupt-cells', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml: pcie@d0e00000: Unevaluated properties are not allowed ('resets', 'phys', 'phy-names', 'reset-assert-ms' were unexpected)
Documentation/devicetree/bindings/pci/rockchip-dw-pcie.example.dt.yaml: pcie@fe280000: Unevaluated properties are not allowed ('clock-names', 'msi-map', 'phys', 'phy-names', 'power-domains', 'resets', 'reset-names' were unexpected)
Documentation/devicetree/bindings/pci/samsung,exynos-pcie.example.dt.yaml: pcie@15700000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', '#interrupt-cells', 'device_type', 'bus-range', 'ranges', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/samsung,exynos-pcie.example.dt.yaml: pcie@15700000: Unevaluated properties are not allowed ('clock-names', 'phys', 'vdd10-supply', 'vdd18-supply' were unexpected)
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.example.dt.yaml: pcie@e00000000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', '#interrupt-cells', 'device_type', 'dma-coherent', 'bus-range', 'ranges', 'interrupts', 'interrupt-parent', 'interrupt-map-mask', 'interrupt-map', 'clock-names', 'clocks' were unexpected)
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.example.dt.yaml: pcie@e00000000: Unevaluated properties are not allowed ('dma-coherent', 'clock-names', 'resets', 'pwren-gpios' were unexpected)
Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.example.dt.yaml: pcie-ep@66000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'reset-names', 'resets', 'phy-names', 'phys' were unexpected)
Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.example.dt.yaml: pcie@28400000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.example.dt.yaml: pcie@28400000: Unevaluated properties are not allowed ('device_type', 'bus-range', 'num-viewport', '#address-cells', '#size-cells', '#interrupt-cells', 'ranges', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'max-link-speed' were unexpected)
The main problem is that snps,dw-pcie.yaml and snps,dw-pcie-ep.yaml
shouldn't set 'unevaluatedProperties: false'. Otherwise, bindings that
reference them cannot add additional properties. With that addressed,
there's a handful of other undocumented properties to add.
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206194426.2470080-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, there's several
warnings due to undocumented properties:
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@0,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@1,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@2,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dt.yaml: pcie@11230000: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/microchip,pcie-host.example.dt.yaml: pcie@2030000000: Unevaluated properties are not allowed ('interrupt-controller' was unexpected)
Documentation/devicetree/bindings/pci/ti,am65-pci-ep.example.dt.yaml: pcie-ep@5500000: Unevaluated properties are not allowed ('num-ib-windows', 'num-ob-windows' were unexpected)
Documentation/devicetree/bindings/pci/ti,am65-pci-host.example.dt.yaml: pcie@5500000: Unevaluated properties are not allowed ('num-viewport', 'interrupts' were unexpected)
Documentation/devicetree/bindings/pci/ti,j721e-pci-host.example.dt.yaml: pcie@2900000: Unevaluated properties are not allowed ('dma-coherent' was unexpected)
Add the necessary property definitions or remove the properties from the
examples to fix these warnings.
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Jianjun Wang <jianjun.wang@mediatek.com>
Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Daire McNamara <daire.mcnamara@microchip.com>
Cc: Abraham I <kishon@ti.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20211206194406.2469361-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, the TI GPMC example
has a warning:
Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.example.dt.yaml: memory-controller@6e000000: onenand@0,0: Unevaluated properties are not allowed ('compatible', '#address-cells', '#size-cells', 'partition@0', 'partition@100000' were unexpected)
The child node definition for GPMC is not a complete binding, so specifying
'unevaluatedProperties: false' for it is not correct and should be
dropped.
Fixup the unnecessary 'allOf' while we're here.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206174215.2297796-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, the ti,rti-wdt example
has the following warning:
/home/rob/proj/git/linux-dt/.build-arm64/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.example.dt.yaml: watchdog@2200000: Unevaluated properties are not allowed ('assigned-clock-parents' was unexpected)
The problem is the schema has a typo in 'assigned-clocks-parents'. As
it is not required to list assigned clocks in bindings, just drop the
property definitions to fix this.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211206174028.2294330-1-robh@kernel.org
When 'unevaluatedProperties' support is enabled, the following warnings
are generated in the mmc bindings:
Documentation/devicetree/bindings/mmc/mtk-sd.example.dt.yaml: mmc@11230000: Unevaluated properties are not allowed ('reg', 'interrupts' were unexpected)
Documentation/devicetree/bindings/mmc/sdhci-am654.example.dt.yaml: mmc@4f80000: Unevaluated properties are not allowed ('sdhci-caps-mask' was unexpected)
Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.example.dt.yaml: mmc@5a400000: Unevaluated properties are not allowed ('dma-names', 'dmas' were unexpected)
Documentation/devicetree/bindings/mmc/arm,pl18x.example.dt.yaml: mmc@80126000: Unevaluated properties are not allowed ('dmas', 'dma-names' were unexpected)
Documentation/devicetree/bindings/mmc/arasan,sdhci.example.dt.yaml: mmc@80420000: Unevaluated properties are not allowed ('resets' was unexpected)
Documentation/devicetree/bindings/mmc/arm,pl18x.example.dt.yaml: mmc@52007000: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
Documentation/devicetree/bindings/clock/imx8qxp-lpcg.example.dt.yaml: mmc@5b010000: Unevaluated properties are not allowed ('power-domains' was unexpected)
Add the missing properties as necessary. For pl18x, drop interrupt-names
as there isn't any use of it when there are 2 interrupts.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Chaotian Jing <chaotian.jing@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Wenbin Mei <wenbin.mei@mediatek.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174201.2297265-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Memory controller drivers for v5.17 - Renesas
Changes to the Renesas RPC-IF driver:
1. Add support for R9A07G044 / RZ/G2L.
2. Several minor fixes and improvements to the driver.
* tag 'memory-controller-drv-renesas-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: renesas-rpc-if: refactor MOIIO and IOFV macros
memory: renesas-rpc-if: avoid use of undocumented bits
memory: renesas-rpc-if: simplify register update
memory: renesas-rpc-if: Silence clang warning
memory: renesas-rpc-if: Add support for RZ/G2L
memory: renesas-rpc-if: Drop usage of RPCIF_DIRMAP_SIZE macro
memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails
dt-bindings: memory: renesas,rpc-if: Add optional interrupts property
dt-bindings: memory: renesas,rpc-if: Add support for the R9A07G044
Link: https://lore.kernel.org/r/20211213105618.5686-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* for-next/perf-smmu:
perf/smmuv3: Synthesize IIDR from CoreSight ID registers
perf/smmuv3: Add devicetree support
dt-bindings: Add Arm SMMUv3 PMCG binding
Add binding for the Arm SMMUv3 PMU. Each node represents a PMCG, and is
placed as a sibling node of the SMMU. Although the PMCGs registers may
be within the SMMU MMIO region, they are separate devices, and there can
be multiple PMCG devices for each SMMU (for example one for the TCU and
one for each TBU).
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20211117144844.241072-2-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Document continuous Burst Clock option. With this option Burst Clock, if
enabled, will output continuous clock, otherwise Burst Clock will output
clock only when necessary.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Apple SoC DT updates for 5.17:
- Separate DTs for all t8103 platforms
- Add i2c and cd321x nodes
- Bindings for apple,wdt
- PMGR bindings and DT updates to instantiate it
- WiFi MAC address DT handling
This also includes the MAINTAINERS change for the PMGR driver itself, to
avoid merge issues; the driver will be sent in a different pull.
Manual fixups: Added i2c power domain references to the PMGR DT commit,
since a prior commit added the i2c nodes.
* tag 'asahi-soc-dt-5.17' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8103: Expose PCI node for the WiFi MAC address
arm64: dts: apple: t8103: Add UART2
arm64: dts: apple: t8103: Add PMGR nodes
dt-bindings: arm: apple: Add apple,pmgr binding
dt-bindings: power: Add apple,pmgr-pwrstate binding
MAINTAINERS: Add PMGR power state files to ARM/APPLE MACHINE
dt-bindings: watchdog: Add Apple Watchdog
dt-bindings: interrupt-controller: apple,aic: Add power-domains property
dt-bindings: pinctrl: apple,pinctrl: Add power-domains property
dt-bindings: iommu: apple,dart: Add power-domains property
dt-bindings: i2c: apple,i2c: Add power-domains property
arm64: dts: apple: t8103: Add cd321x nodes
arm64: dts: apple: t8103: Add i2c nodes
arm64: dts: apple: Add missing M1 (t8103) devices
dt-bindings: arm: apple: Add iMac (24-inch 2021) to Apple bindings
arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
dt-bindings: i2c: apple,i2c: allow multiple compatibles
arm64: dts: apple: change ethernet0 device type to ethernet
Link: https://lore.kernel.org/r/e18b476c-7b1f-de73-53a2-0e21fb5cd283@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are two possible audio setups on MSM8916/APQ8016: Normally the audio
is routed through the audio/modem DSP (covered by the qdsp6 driver). During
upstreaming for the DragonBoard 410c it was decided to bypass it and
instead talk directly to the audio controller using the "lpass" driver.
Bypassing the DSP gives more control about the audio configuration but limits
the functionality: For example, routing audio through the audio/modem DSP is
strictly required for voice call audio. Also, without the special changes in
the DB410c firmware other MSM8916 devices can only use the bypass as long as
the modem DSP is not started. Otherwise, the firmware will assume control of
the LPASS hardware block and audio is no longer functional.
Add support for using the DSP audio setup instead using a new
"qcom,msm8916-qdsp6-sndcard" compatible. It is basically a mixture of
the apq8016-sbc-sndcard and the newer sm8250-sndcard, which uses
indirect QDSP6 DAI links instead of the direct LPASS DAI links.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-5-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
All the Qualcomm sound card drivers use the same common device tree
parsing code, so the allowed device tree nodes are almost the same
for all of them. Convert the qcom,apq8016-sbc-sndcard documentation
to a DT schema by adding it to the existing qcom,sm8250 schema.
The only speciality of qcom,apq8016-sbc-sndcard is that it has memory
resources for setting up an I/O mux. This can be handled using
a conditional if statement that only requires it for the apq8016-sbc
compatible.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-4-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
