Jonathan writes:
2nd set of new device support etc for IIO in the 5.17 cycle.
A small additional set of things that just missed the previous
pull request and have mostly been through plenty of review before the
holiday period began (or are trivial). I've not taken some other series
on the list to allow for more eyes after the holiday period.
New device support
* adi,admv1013
- New driver for this wideband microwave upconverter including dt-bindings
and some device specific ABI due to the need to describe phase calibrations
of a differential channel on both i and q phases. Previously we could
do differential or i/q but not both on the same channel. The driver
ABI uses a workaround for core support which will do until we know if
this is a common requirement for which a more generic solution is
needed.
MAINTAINERS:
* Add Haibo Chen as a maintainer for various NXP SoC ADCs.
Minor cleanup:
* sunrise_co2
- Make sure an uninitialized value isn't used to set *val in read_raw().
Not a real bug, but a compiler or reviewer can't tell that based
on what they can see locally.
* tag 'iio-for-5.17b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: chemical: sunrise_co2: set val parameter only on success
dt-bindings:iio:adc: update the maintainer of vf610-adc
MAINTAINERS: add imx7d/imx6sx/imx6ul/imx8qxp and vf610 adc maintainer
Documentation:ABI:testing:admv1013: add ABI docs
dt-bindings: iio: frequency: add admv1013 doc
iio: frequency: admv1013: add support for ADMV1013
* dpu plane state cleanup in prep for multirect
* dpu debugfs cleanup (and moving things to atomic_print_state) in prep
for multirect
* dp support for sc7280
* struct_mutex removal
* include more GMU state in gpu devcore dumps
* add support for a506
* remove old eDP sub-driver (never was used in any upstream supported
devices and modern things with eDP will use DP sub-driver instead)
* debugfs to disable hw gpu hang detect for (igt tests)
* debugfs for dumping display hw state
* and the usual assortment of cleanup and bug fixes
There still seems to be a timing issue with dpu, showing up on sc7180
devices, after the bridge probe-order change. Ie. things work great if
loglevel is high enough (or enough debug options are enabled, etc).
We'll continue to debug this in the new year.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs+vwr0nkwgYzuYAsCoHtypWpWav+yVvLZGsEJy8tJ56A@mail.gmail.com
Exynos850 SoC has two CPU clusters:
- cluster 0: contains CPUs #0, #1, #2, #3
- cluster 1: contains CPUs #4, #5, #6, #7
Each cluster has its own dedicated watchdog timer. Those WDT instances
are controlled using different bits in PMU registers, new
"samsung,index" property is added to tell the driver which bits to use
for defined watchdog node.
Also on Exynos850 the peripheral clock and the source clock are two
different clocks. Provide a way to specify two clocks in watchdog device
tree node.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-3-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Pull thermal control material for 5.17-rc1 from Daniel Lezcano:
- Fix PM issue on the iMX driver when suspend/resume is happening by
implementing PM runtime support (Oleksij Rempel)
- Add 'const' annotation to the thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn)
- Add TSU driver and bindings for the RZ/G2L platform (Biju Das)
- Fix missing ADC bit set on iMX8MP to enable the sensor (Paul Gerber)
- Fix missing check when calling reset_control_deassert() (Biju Das)
* tag 'thermal-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/rz2gl: Add error check for reset_control_deassert()
thermal/drivers/imx8mm: Enable ADC when enabling monitor
thermal/drivers: Add TSU driver for RZ/G2L
dt-bindings: thermal: Document Renesas RZ/G2L TSU
thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
thermal/drivers/imx: Implement runtime PM support
The QSPI controller on Intel's SoCFPGA platform does not implement the
CQSPI_REG_WR_COMPLETION_CTRL register, thus a write to this register
results in a crash.
Introduce the dts compatible "intel,socfpga-qspi" to differentiate the
hardware.
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v3: revert to "intel,socfpga-qspi"
v2: change binding to "cdns,qspi-nor-0010" to be more generic for other
platforms
Georgi writes:
interconnect changes for 5.17
Here are the interconnect changes for the 5.17-rc1 merge window
consisting of new drivers, minor changes and fixes.
New drivers:
- New driver for MSM8996 platforms
- New driver for SC7280 EPSS L3 hardware
- New driver for QCM2290 platforms
- New driver for SM8450 platforms
Driver changes:
- dt-bindings: interconnect: Combine SDM660 bindings into RPM schema
- icc-rpm: Add support for bus power domain
- icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode check
- icc-rpm: Define ICC device type
- icc-rpm: Add QNOC type QoS support
- icc-rpm: Support child NoC device probe
- icc-rpm: Prevent integer overflow in rate
- icc-rpmh: Add BCMs to commit list in pre_aggregate
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add QCM2290 driver support
dt-bindings: interconnect: Add Qualcomm QCM2290 NoC support
interconnect: icc-rpm: Support child NoC device probe
interconnect: icc-rpm: Add QNOC type QoS support
interconnect: icc-rpm: Define ICC device type
interconnect: qcom: Add SM8450 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SM8450 DT bindings
interconnect: qcom: rpm: Prevent integer overflow in rate
interconnect: icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode check
interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate
interconnect: qcom: Add MSM8996 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm MSM8996 DT bindings
interconnect: icc-rpm: Add support for bus power domain
dt-bindings: interconnect: Combine SDM660 bindings into RPM schema
interconnect: qcom: Add EPSS L3 support on SC7280
dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280
Some sound card setups might require extra pin switches to allow
turning off certain audio components. There are two real examples for
this in smartphones/tablets based on MSM8916:
1. Analog speaker amplifiers connected to headphone outputs.
The MSM8916 analog codec does not have a separate "Line Out" port
so some devices have an analog speaker amplifier connected to one
of the headphone outputs. A pin switch is necessary to allow
playback on headphones without also activating the speaker.
2. External speaker codec also used as earpiece.
Some smartphones have two front-facing (stereo) speakers that can
be also configured to act as an earpiece during voice calls. A pin
switch is needed to allow disabling the second speaker during
voice calls.
There are existing bindings that allow setting up such pin switches in
simple-card.yaml. Document the same for Qcom sound cards.
One variant of example 1 above is added to the examples in the DT
schema: There is an analog speaker amplifier connected to the HPH_R
(right headphone channel) output. Adding a "Speaker" pin switch and
widget allows turning off the speaker when audio should be only played
via the connected headphones.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211214142049.20422-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Kalle Valo says:
====================
wireless-drivers-next patches for v5.17
Third set of patches for v5.17, and the final one if all goes well. We
have Specific Absorption Rate (SAR) support for both mt76 and rtw88.
Also iwlwifi should be now W=1 warning free. But otherwise nothing
really special this time, business as usual.
Major changes:
mt76
* Specific Absorption Rate (SAR) support
* mt7921: new PCI ids
* mt7921: 160 MHz channel support
iwlwifi
* fix W=1 and sparse warnings
* BNJ hardware support
* add new killer device ids
* support for Time-Aware-SAR (TAS) from the BIOS
* Optimized Connectivity Experience (OCE) scan support
rtw88
* hardware scan
* Specific Absorption Rate (SAR) support
ath11k
* qca6390/wcn6855: report signal and tx bitrate
* qca6390: rfkill support
* qca6390/wcn6855: regdb.bin support
ath5k
* switch to rate table based lookup
wilc1000
* spi: reset/enable GPIO support
* tag 'wireless-drivers-next-2021-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (148 commits)
mt76: mt7921: fix a possible race enabling/disabling runtime-pm
wilc1000: Document enable-gpios and reset-gpios properties
wilc1000: Add reset/enable GPIO support to SPI driver
wilc1000: Convert static "chipid" variable to device-local variable
rtw89: 8852a: correct bit definition of dfs_en
rtw88: don't consider deep PS mode when transmitting packet
ath11k: Fix unexpected return buffer manager error for QCA6390
ath11k: add support of firmware logging for WCN6855
ath11k: Fix napi related hang
ath10k: replace strlcpy with strscpy
rtw88: support SAR via kernel common API
rtw88: 8822c: add ieee80211_ops::hw_scan
iwlwifi: mei: wait before mapping the shared area
iwlwifi: mei: clear the ownership when the driver goes down
iwlwifi: yoyo: fix issue with new DBGI_SRAM region read.
iwlwifi: fw: fix some scan kernel-doc
iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ
iwlwifi: mvm: remove card state notification code
iwlwifi: mvm: drop too short packets silently
iwlwifi: mvm: fix AUX ROC removal
...
====================
Link: https://lore.kernel.org/r/20211223141108.78808C36AE9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to validate multiple "if" conditionals, they must be part of an
"allOf:" list, otherwise they will cause a failure in parsing the schema
because of the duplicated "if" property.
Fixes: d7df3948eb ("dt-bindings: display: bridge: lvds-codec: Document pixel data sampling edge select")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211220125147.519880-1-thierry.reding@gmail.com
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.17, please pull the following:
- Rafal adds and documents the Netgear RAXE500 Wireless router based on
the BCM4908 SoC.
* tag 'arm-soc/for-5.17/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500
dt-bindings: arm: bcm: document Netgear RAXE500 binding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SocS Device Tree changes
for v5.17, please pull the following:
- Matthew enables the QCA8337 switch of the Merak MX65 to have the
appropriate PLL properties for it to be enabled and set the SGMII
transmit clock to falling edge.
- Arinc removes unnecessary properties of the GPIO keyboard Device Tree
node, adds the external Realtek RTM8365MB switch on the Ausus RT-AC88U,
including fixing the RX delay on the Realtek switch side and enabling
flow control on the Broadcom internal switch port connecting to the
Realtek switch.
- Christian updates the Meraki MR32 Device Tree node to make use of the
hardware I2C controller instead of bitbanging
- Rafal updates the BCM5310X Device Tree files to have the CRU node not
generate warnings, updates the USB 2.0 PHY to use the non-deprecated
binding
- Uwe adds GPIO offset to the gpio names properties for readability
- Stefan updates the BCM2835 VCHIQ Device Tree binding to YAML
- Florian fixes the iProc PCIe Device Tree nodes in Cygnus, Hurricane 2
and Northstar Plus to be compliant with the iProc PCIe YAML binding
(merged in RobH's tree) as well as the SATA controller node unit name.
* tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: correct RX delay and enable flow control on Asus RT-AC88U
ARM: dts: NSP: Rename SATA unit name
ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
ARM: dts: HR2: Fixed iProc PCIe MSI sub-node
ARM: dts: Cygnus: Update PCIe PHY node unit name(s)
ARM: dts: Cygnus: Fixed iProc PCIe controller properties
dt-bindings: soc: bcm: Convert brcm,bcm2835-vchiq to json-schema
ARM: dts: bcm2711-rpi-4-b: Add gpio offsets to line name array
ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
ARM: dts: BCM5301X: update CRU block description
ARM: BCM53016: MR32: convert to Broadcom iProc I2C Driver
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
ARM: dts: BCM5301X: remove unnecessary address & size cells from Asus RT-AC88U
ARM: dts: NSP: MX65: add qca8k falling-edge, PLL properties
Qualcomm ARM64 DeviceTree updates for v5.17
This introduces initial support for the brand new Snapdragon 8 Gen 1,
aka SM8450 platform, with SMP, CPUfreq, cluster idling, low speed buses,
TLMM pinctrl, SMMU, regulators, clocks, power-domains, UFS storage and
USB currently supported.
SDM845 adds new support for Sony Xperia XZ2, XZ2C and XZ3. The Lenovo
Yoga C630 gains a few audio related fixes. The PMIC's VADC channels are
described as thermal zones. OnePlus devices gains msm-id and board-id,
to facilitate a single firmware image for the multiple devices.
On SM8350 the Sony Xperia 1 III and 5 III, as well as initial
description of Microsoft's Surface Duo 2 are introduced. On the
platform side, LLCC, QUP nodes, redistributor stride and all the
low-speed QUPs are added
MSM8996 gained various regulator fixes, and adsp firmware name to
faciliate pushing firmware to linux-firmware. Xiaomi Mi Note 2 gained
touchkey controller definition.
On SDM660 the Xiaomi Redmi Note 7 gained power and volume keys, RPM and
regulator definitions, USB, eMMC and SD-card and a simple-framebuffer
description.
MSM8916 has the mmc aliases corrected, to stop the storage devices to
move around and the RPM sleep stats memory is described. Support for the
Samsung J5 2015 smartphone is introduced.
SM6350 validation errors are fixed and and description of the audio,
compute and modem remoteprocs are added.
A couple new revisions of the SC7180 based Google devices are added.
The SC7280 platform gains venus and a few fixes. The CRD development
device is introduced, with the EC, touchscreen and touchpad.
On SM8250 CPU opp-tables, for scaling L3 cache and DDR frequency based
on CPU frequency, are added. As is TX, RX macros and SoundWire blocks
and used to enable audio on the SM8350 MTP.
* tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (92 commits)
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes
arm64: dts: qcom: sm8450: add cpufreq support
arm64: dts: qcom: sm8450: Add rpmhpd node
arm64: dts: qcom: sm8450-qrd: enable ufs nodes
arm64: dts: qcom: sm8450: add ufs nodes
arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes
arm64: dts: qcom: Add base SM8450 QRD DTS
arm64: dts: qcom: sm8450: add smmu nodes
arm64: dts: qcom: sm8450: Add reserved memory nodes
arm64: dts: qcom: sm8450: Add tlmm nodes
arm64: dts: qcom: Add base SM8450 DTSI
arm64: dts: qcom: ipq6018: Fix gpio-ranges property
arm64: dts: qcom: sdm845: add QFPROM chipset specific compatible
arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
arm64: qcom: dts: drop legacy property #stream-id-cells
Revert "arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer"
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
