Andrei's address is not valid anymore, collect all pinctrl/gpio
entries in the common "PIN CONTROLLER - MICROCHIP AT91" one
and remove the PIOBU specific one.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20190823083158.2649-1-nicolas.ferre@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The older CSI drivers have camera capture interface different from the one
in the newer ones.
This IP is pretty simple. Some variants (one controller out of two
instances on some SoCs) have an ISP embedded, but there's no code that make
use of it, so we ignored that part for now.
[Sakari Ailus: Wrapped a few long lines, set mbus code using a macro.]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The Allwinner A10 CMOS Sensor Interface is a camera capture interface also
used in later (A10s, A13, A20, R8 and GR8) SoCs.
On some SoCs, like the A10, there's multiple instances of that controller,
with one instance supporting more channels and having an ISP.
[Sakari Ailus: Add type: object to the endpoint node.]
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cleanup MAINTAINERS from FMC record since the subsystem was removed.
Cc: Pat Riehecky <riehecky@fnal.gov>
Fixes: 6a80b30086 ("fmc: Delete the FMC subsystem")
Signed-off-by: Denis Efremov <efremov@linux.com>
Link: https://lore.kernel.org/r/20190813061547.17847-1-efremov@linux.com
Reviewed-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Amlogic Meson GX SoCs uses a special register to store the
time in seconds to wakeup after a system suspend.
In order to be able to reuse the RTC wakealarm feature, this
driver implements a fake RTC device which uses the system time
to deduce a suspend delay.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: rebase to v5.3-rc, rework and modernization]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20190812232850.8016-3-khilman@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Pull RCU and LKMM changes from Paul E. McKenney:
- A few more RCU flavor consolidation cleanups.
- Miscellaneous fixes.
- Updates to RCU's list-traversal macros improving lockdep usability.
- Torture-test updates.
- Forward-progress improvements for no-CBs CPUs: Avoid ignoring
incoming callbacks during grace-period waits.
- Forward-progress improvements for no-CBs CPUs: Use ->cblist
structure to take advantage of others' grace periods.
- Also added a small commit that avoids needlessly inflicting
scheduler-clock ticks on callback-offloaded CPUs.
- Forward-progress improvements for no-CBs CPUs: Reduce contention
on ->nocb_lock guarding ->cblist.
- Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass
list to further reduce contention on ->nocb_lock guarding ->cblist.
- LKMM updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This interface driver is a helper driver allows other drivers to
have a common interface with the Hyper-V PCI frontend driver.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have been reviewing patches for md in the past few months. Mark me
as the MD maintainer, as I have effectively been filling that role.
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdXX+WAAoJEL/70l94x66DmBoH/RT2qD8Z16Nwlz/8XbFmUCtb
4B0eCaiTpnmDuF2T9nghMitg/CHjFHJJK7bLSkq9C4Fb9HTEfDabb4TRMENOVTB3
u9bK2s+/WG2uWKt1rP6uhSgVumwPQ/5JY30N59nEZ+ZgY6bJ+U3pUfZnPb4FeaVi
EKYXDeToEXWVHJyv+HpkJ+2YV7gQ43qZO3x6papzPAbJp5yN7YDETDylPLF7y7CL
njZ+8z4HaVoJH/T3E2wySEcFO2W9Pc7YH8fIFbvGmPMuOMB5AabBj3mnq/38qsVn
n/SPMrq81DqNH9xeCQXR/7NdPr0ifx830K74pHJ/uCcwHjzB9KWSkv8lbyBPuEU=
=zArX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A couple bugfixes, and mostly selftests changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests/kvm: make platform_info_test pass on AMD
Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"
selftests: kvm: fix state save/load on processors without XSAVE
selftests: kvm: fix vmx_set_nested_state_test
selftests: kvm: provide common function to enable eVMCS
selftests: kvm: do not try running the VM in vmx_set_nested_state_test
KVM: x86: svm: remove redundant assignment of var new_entry
MAINTAINERS: add KVM x86 reviewers
MAINTAINERS: change list for KVM/s390
kvm: x86: skip populating logical dest map if apic is not sw enabled
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dma-buf: add reservation_object_fences helper, relax
reservation_object_add_shared_fence, remove
reservation_object seq number (and then
restored)
- dma-fence: Shrinkage of the dma_fence structure,
Merge dma_fence_signal and dma_fence_signal_locked,
Store the timestamp in struct dma_fence in a union with
cb_list
Driver Changes:
- More dt-bindings YAML conversions
- More removal of drmP.h includes
- dw-hdmi: Support get_eld and various i2s improvements
- gm12u320: Few fixes
- meson: Global cleanup
- panfrost: Few refactors, Support for GPU heap allocations
- sun4i: Support for DDC enable GPIO
- New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
Toppoly TD043MTEA1
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXVqvpwAKCRDj7w1vZxhR
xa3RAQDzAnt5zeesAxX4XhRJzHoCEwj2PJj9Re6xMJ9PlcfcvwD+OS+bcB6jfiXV
Ug9IBd/DqjlmD9G9MxFxfSV946rksAw=
=8uv4
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dma-buf: add reservation_object_fences helper, relax
reservation_object_add_shared_fence, remove
reservation_object seq number (and then
restored)
- dma-fence: Shrinkage of the dma_fence structure,
Merge dma_fence_signal and dma_fence_signal_locked,
Store the timestamp in struct dma_fence in a union with
cb_list
Driver Changes:
- More dt-bindings YAML conversions
- More removal of drmP.h includes
- dw-hdmi: Support get_eld and various i2s improvements
- gm12u320: Few fixes
- meson: Global cleanup
- panfrost: Few refactors, Support for GPU heap allocations
- sun4i: Support for DDC enable GPIO
- New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
Toppoly TD043MTEA1
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixup dma_resv rename fallout]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819141923.7l2adietcr2pioct@flea
Replace "driver" with "drivers" in the filepath to net_failover.c
Cc: Sridhar Samudrala <sridhar.samudrala@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Fixes: cfc80d9a11 ("net: Introduce net_failover driver")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Remove IP MASQUERADING record in MAINTAINERS file,
from Denis Efremov.
2) Counter arguments are swapped in ebtables, from
Todd Seidelmann.
3) Missing netlink attribute validation in flow_offload
extension.
4) Incorrect alignment in xt_nfacct that breaks 32-bits
userspace / 64-bits kernels, from Juliana Rodrigueiro.
5) Missing include guard in nf_conntrack_h323_types.h,
from Masahiro Yamada.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov.
2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan.
3) Fix severe performance regression due to lack of SKB coalescing of
fragments during local delivery, from Guillaume Nault.
4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk.
5) Fix batched events in skbedit packet action, from Roman Mashak.
6) Propagate VLAN TX offload to hw_enc_features in bond and team
drivers, from Yue Haibing.
7) RXRPC local endpoint refcounting fix and read after free in
rxrpc_queue_local(), from David Howells.
8) Fix endian bug in ibmveth multicast list handling, from Thomas
Falcon.
9) Oops, make nlmsg_parse() wrap around the correct function,
__nlmsg_parse not __nla_parse(). Fix from David Ahern.
10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin.
11) Fix memory leak in cxgb4, from Wenwen Wang.
12) Yet another race in AF_PACKET, from Eric Dumazet.
13) Fix false detection of retransmit failures in tipc, from Tuong
Lien.
14) Use after free in ravb_tstamp_skb, from Tho Vu.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
ravb: Fix use-after-free ravb_tstamp_skb
netfilter: nf_tables: map basechain priority to hardware priority
net: sched: use major priority number as hardware priority
wimax/i2400m: fix a memory leak bug
net: cavium: fix driver name
ibmvnic: Unmap DMA address of TX descriptor buffers after use
bnxt_en: Fix to include flow direction in L2 key
bnxt_en: Use correct src_fid to determine direction of the flow
bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command
bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
bnxt_en: Improve RX doorbell sequence.
bnxt_en: Fix VNIC clearing logic for 57500 chips.
net: kalmia: fix memory leaks
cx82310_eth: fix a memory leak bug
bnx2x: Fix VF's VLAN reconfiguration in reload.
Bluetooth: Add debug setting for changing minimum encryption key size
tipc: fix false detection of retransmit failures
lan78xx: Fix memory leaks
MAINTAINERS: r8169: Update path to the driver
MAINTAINERS: PHY LIBRARY: Update files in the record
...
Add some nascent infrastructure for handling implementation-specific
details outside the flow of the architectural code. This will allow us
to keep mutually-incompatible vendor-specific hooks in their own files
where the respective interested parties can maintain them with minimal
chance of conflicts. As somewhat of a template, we'll start with a
general place to collect the relatively trivial existing quirks.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
This entry is in MAINTAINERS for historical purpose.
It doesn't match current sources since the commit
adf82accc5 ("netfilter: x_tables: merge ip and
ipv6 masquerade modules") moved the module.
The net/netfilter/xt_MASQUERADE.c module is already under
the netfilter section. Thus, there is no purpose to keep this
separate entry in MAINTAINERS.
Cc: Florian Westphal <fw@strlen.de>
Cc: Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
Cc: netfilter-devel@vger.kernel.org
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix typo (s/quadddec/quaddec/) in the path to the documentation.
Cc: linux-iio@vger.kernel.org
Fixes: 517b2d045a ("MAINTAINERS: add counter/ftm-quaddec driver entry")
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the inconsistent error handling in the umwait init code
- Rework the boot param zeroing so gcc9 stops complaining about out
of bound memset. The resulting source code is actually more sane to
read than the smart solution we had
- Maintainers update so Tony gets involved when Intel models are
added
- Some more fallthrough fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Save fields explicitly, zero out everything else
MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.h
x86/fpu/math-emu: Address fallthrough warnings
x86/apic/32: Fix yet another implicit fallthrough warning
x86/umwait: Fix error handling in umwait_init()
- A fix for the hyper-v MAINTAINERs entry from Lan Tianyu.
- Fix for SPDX license identifier in the userspace tools from Nishad
Kamdar.
-----BEGIN PGP SIGNATURE-----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=iKcM
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Sasha Levin:
- A few fixes for the userspace hyper-v tools from Adrian Vladu.
- A fix for the hyper-v MAINTAINERs entry from Lan Tianyu.
- Fix for SPDX license identifier in the userspace tools from Nishad
Kamdar.
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
MAINTAINERS: Fix Hyperv vIOMMU driver file name
tools: hv: Use the correct style for SPDX License Identifier
tools: hv: fix typos in toolchain
tools: hv: fix KVP and VSS daemons exit code
tools: hv: fixed Python pep8/flake8 warnings for lsvmbus
Export a function that can be invoked in order to report packets that
were dropped by the underlying hardware along with metadata.
Subsequent patches will add support for the different alert modes.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Hyperv vIOMMU file name should be "hyperv-iommu.c" rather
than "hyperv_iommu.c". This patch is to fix it.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull i2c fixes from Wolfram Sang:
"I2C has one revert because of a regression, two fixes for tiny race
windows (which we were not able to trigger), a MAINTAINERS addition,
and a SPDX fix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32: Use the correct style for SPDX License Identifier
i2c: emev2: avoid race when unregistering slave client
i2c: rcar: avoid race when unregistering slave client
MAINTAINERS: i2c-imx: take over maintainership
Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"
Sven is taking care of tracking our patches and merging most of them in
our tree. Let's add him to the MAINTAINERS file so he will get all
patch e-mails.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Antonio Quartulli <a@unstable.cc>
Update MAINTAINERS record to reflect the filename change.
The file was moved in commit 25e992a460 ("r8169: rename
r8169.c to r8169_main.c")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update MAINTAINERS to reflect that sysfs-bus-mdio was removed in
commit a6cd0d2d49 ("Documentation: net-sysfs: Remove duplicate
PHY device documentation") and sysfs-class-net-phydev was added in
commit 86f22d04df ("net: sysfs: Document PHY device sysfs
attributes").
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds bindings for the Analog Devices ADIN PHY driver, detailing
all the properties implemented by the driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds support for Analog Devices Industrial Ethernet PHYs.
Particularly the PHYs this driver adds support for:
* ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY
* ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit
Ethernet PHY
The 2 chips are register compatible with one another. The main difference
being that ADIN1200 doesn't operate in gigabit mode.
The chips can be operated by the Generic PHY driver as well via the
standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the
kernel as well. This assumes that configuration of the PHY has been done
completely in HW, according to spec.
Configuration can also be done via registers, which will be supported by
this driver.
Datasheets:
https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdfhttps://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SGI SN2 support is about to be removed. Remove this driver that
depends on the SN2 support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-9-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>
- Update MAINTAINERS now that we've removed fs/iomap.c.
-----BEGIN PGP SIGNATURE-----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=mOPT
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixlet from Darrick Wong:
"A single update to the MAINTAINERS entry for iomap now that we've
removed fs/iomap.c"
* tag 'iomap-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
MAINTAINERS: iomap: Remove fs/iomap.c record
The ov5670 driver didn't get a MAINTAINERS entry when it was merged. Add
one now.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a V4L2 sub-device driver for Omnivision ov5675 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 2592x1944 at 30FPS
+ 1296x972 at 30FPS
[Sakari Ailus: Wrapped a few long lines.]
[mchehab+samsung@kernel.org: fix a checkpatch warning]
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are a few different subsystems in the kernel that depend on model
specific behaviour (perf, EDAC, power, ...). Easier for just one person
to have the task to get new model numbers included instead of having
these groups trip over each other to do it.
[ bp: s/Cpu/CPU/ and add x86@kernel.org so that it gets CCed too as
FYI. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190814234030.30817-1-tony.luck@intel.com
Handful of fixes/updates including:
1. SCMI v2.0(recently released) support for:
- Performance protocol fast channels
- Reset Management Protocol
2. SCMI infrastructure/core support for recieve(Rx) channels,
asynchronous commands and delayed response
3. Usage of asynchronous commands for clock rate setting and sensor
reading based on the attributes read from the firmware
4. Miscellaneous cleanups(typos, naming alignment with specification,
and SPDX License identifier)
5. Couple of fixes: removal of extra check for invalid length and
additional check to ensure platform/firmware has released shared
memory before using it in OSPM
-----BEGIN PGP SIGNATURE-----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=Rnle
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI updates/fixes for v5.4
Handful of fixes/updates including:
1. SCMI v2.0(recently released) support for:
- Performance protocol fast channels
- Reset Management Protocol
2. SCMI infrastructure/core support for recieve(Rx) channels,
asynchronous commands and delayed response
3. Usage of asynchronous commands for clock rate setting and sensor
reading based on the attributes read from the firmware
4. Miscellaneous cleanups(typos, naming alignment with specification,
and SPDX License identifier)
5. Couple of fixes: removal of extra check for invalid length and
additional check to ensure platform/firmware has released shared
memory before using it in OSPM
* tag 'scmi-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (22 commits)
reset: Add support for resets provided by SCMI
firmware: arm_scmi: Add RESET protocol in SCMI v2.0
dt-bindings: arm: Extend SCMI to support new reset protocol
firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol
firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels
firmware: arm_scmi: Use {get,put}_unaligned_le{32,64} accessors
firmware: arm_scmi: Use asynchronous CLOCK_RATE_SET when possible
firmware: arm_scmi: Drop config flag in clk_ops->rate_set
firmware: arm_scmi: Add asynchronous sensor read if it supports
firmware: arm_scmi: Drop async flag in sensor_ops->reading_get
firmware: arm_scmi: Add support for asynchronous commands and delayed response
firmware: arm_scmi: Add mechanism to unpack message headers
firmware: arm_scmi: Separate out tx buffer handling and prepare to add rx
firmware: arm_scmi: Add receive channel support for notifications
firmware: arm_scmi: Segregate tx channel handling and prepare to add rx
firmware: arm_scmi: Reorder some functions to avoid forward declarations
firmware: arm_scmi: Check if platform has released shmem before using
firmware: arm_scmi: Use the term 'message' instead of 'command'
firmware: arm_scmi: Fix few trivial typos in comments
firmware: arm_scmi: Remove extra check for invalid length message responses
...
Link: https://lore.kernel.org/r/20190814172454.26191-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is probably overdue---KVM x86 has quite a few contributors that
usually review each other's patches, which is really helpful to me.
Formalize this by listing them as reviewers. I am including people
with various expertise:
- Joerg for SVM (with designated reviewers, it makes more sense to have
him in the main KVM/x86 stanza)
- Sean for MMU and VMX
- Jim for VMX
- Vitaly for Hyper-V and possibly SVM
- Wanpeng for LAPIC and paravirtualization.
Please ack if you are okay with this arrangement, otherwise speak up.
In other news, Radim is going to leave Red Hat soon. However, he has
not been very much involved in upstream KVM development for some time,
and in the immediate future he is still going to help maintain kvm/queue
while I am on vacation. Since not much is going to change, I will let
him decide whether he wants to keep the maintainer role after he leaves.
Acked-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wanpeng Li <wanpengli@tencent.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/s390 does not have a list of its own, and linux-s390 is in the
loop anyway thanks to the generic arch/s390 match. So use the generic
KVM list for s390 patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a slew of Ux500 updates for the v5.4 kernel cycle:
- Stop populating the PRCMU devices from the core CPU
file, it works just fine at device_initcall() level.
- Add a missing of_node_put() in the core file.
- Simplify the debug UART code.
- Add myself to MAINTAINERS
* tag 'ux500-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
MAINTAINERS: add soc/ux500
ARM: ux500: simplify and move debug UART
ARM: ux500: add missing of_node_put()
ARM: ux500: Stop populating the PRCMU devices early
Link: https://lore.kernel.org/r/CACRpkdbH-h5fRwuidcpeOp8mtRoKUW65SAk8a4A==BCDzn3QMA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are three families of IOP machines we support in Linux: iop32x
(which includes EP80219), iop33x and iop13xx (aka IOP34x aka WP8134x).
All products we support in the kernel are based on the first of these,
iop32x, the other families only ever supported the Intel reference
boards but no actual machine anyone could ever buy.
While one could clearly make them all three work in a single kernel
with some work, this takes the easy way out, removing the later two
platforms entirely, under the assumption that there are no remaining
users.
Earlier versions of OpenWRT and Debian both had support for iop32x
but not the others, and they both dropped iop32x as well in their 2015
releases.
Link: https://lore.kernel.org/r/20190809163334.489360-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C parts
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds documentation of the device tree bindings for GPIOs
on the devices connected via Moxtet bus.
Link: https://lore.kernel.org/r/20190812161118.21476-6-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for interpreting the input and output bits of one
device on Moxtet bus as GPIOs.
This is needed for example by the SFP cage module of Turris Mox.
Link: https://lore.kernel.org/r/20190812161118.21476-5-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add sysfs ABI documentation for the attribute files module_id and
module_name
Add debugfs ABI documentation for reading input from the shift registers
and reading last written output or write output to the shift registers.
Link: https://lore.kernel.org/r/20190812161118.21476-4-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds device tree binding documentation for the Moxtet bus, a bus
via which the different modules connected to the Turris Mox router can
be configured.
Link: https://lore.kernel.org/r/20190812161118.21476-3-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On the Turris Mox router different modules can be connected to the main
CPU board: currently a module with a SFP cage, a module with MiniPCIe
connector, a PCIe pass-through MiniPCIe connector module, a 4-port
switch module, an 8-port switch module, and a 4-port USB3 module.
For example:
[CPU]-[PCIe-pass-through]-[PCIe]-[8-port switch]-[8-port switch]-[SFP]
Each of this modules has an input and output shift register, and these
are connected via SPI to the CPU board.
Via SPI we are able to discover which modules are connected, in which
order, and we can also read some information about the modules (eg.
their interrupt status), and configure them.
From each module 8 bits can be read (of which low 4 bits identify the
module) and 8 bits can be written.
For example from the module with a SFP cage we can read the LOS,
TX-FAULT and MOD-DEF0 signals, while we can write TX-DISABLE and
RATE-SELECT signals.
This driver creates a new bus type, called "moxtet". For each Mox module
it finds via SPI, it creates a new device on the moxtet bus so that
drivers can be written for them.
It also implements a virtual interrupt controller for the modules which
send their interrupt status over the SPI shift register. These modules
do this in addition to sending their interrupt status via the shared
interrupt line. When the shared interrupt is triggered, we read from the
shift register and handle IRQs for all devices which are in interrupt.
The topology of how Mox modules are connected can then be read by
listing /sys/bus/moxtet/devices.
Link: https://lore.kernel.org/r/20190812161118.21476-2-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This removes the old Winbond w90x900 platform, also known
as Nuvoton NUC900. Wan Zongshun originally contributed
the port and maintained it since then.
From all I can tell, this platform is no longer being used
with modern kernels, based on various indications:
- The supported chips (nuc910/950/960) are no longer marketed
by the manufacturer
- Newer chips from the same family (nuc97x, nuc980, n329x)
that are still marketed have Linux BSPs but those were never
submitted for upstream inclusion.
- The last patch from the platform maintainer was in 2011.
- All patches to w90x900 platform specific files afterwards
are cleanups that were apparently done without access to
test hardware.
- Both the website and the email address listed in the
MAINTAINERS have become unreachable.
Link: https://lore.kernel.org/r/20190809202749.742267-17-arnd@arndb.de
Cc: "Wanzongshun (Vincent)" <wanzongshun@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ks8695 is an older SoC originally made by Kendin, which was later acquired
by Micrel, and subsequently by Microchip.
The platform port was originally contributed by Andrew Victor and Ben
Dooks, and later maintained by Greg Ungerer.
When I recently submitted cleanups, but Greg noted that the platform no
longer boots and nobody is using it any more, we decided to remove it.
Link: https://lore.kernel.org/r/20190809202749.742267-2-arnd@arndb.de
Cc: Andrew Victor <linux@maxim.org.za>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Link: https://wikidevi.com/wiki/Micrel
Link: https://lore.kernel.org/linux-arm-kernel/2bc41895-d4f9-896c-0726-0b2862fcbf25@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rename the bindings documentation file for Renesas EMEV2 IIC controller
from i2c-emev2.txt to renesas,iic-emev2.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rename the bindings documentation file for R-Car I2C controller
from i2c-rcar.txt to renesas,i2c.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
I would like to maintain the i2c-imx driver. Since I work with
different i.MX variants and have access to the hardware, I can spend
some time on the reviewing of this driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Pull in generic CPU topology changes from Paul Walmsley (RISC-V).
* tag 'common/for-v5.4-rc1/cpu-topology' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add an entry for generic architecture topology
base: arch_topology: update Kconfig help description
RISC-V: Parse cpu topology during boot.
arm: Use common cpu_topology structure and functions.
cpu-topology: Move cpu topology code to common code.
dt-binding: cpu-topology: Move cpu-map to a common binding.
Documentation: DT: arm: add support for sockets defining package boundaries
Fix typo (s/sysgmr/sysmgr/) in the header filepath.
Fixes: f36e789a1f ("mfd: altera-sysmgr: Add SOCFPGA System Manager")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Update MAINTAINERS to reflect that fs/iomap.c file
was splitted into separate files in fs/iomap/
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Fixes: cb7181ff4b ("iomap: move the main iteration code into a separate file")
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cleanup MAINTAINERS from zoran record since the driver was removed.
Fixes: 8dce4b265a ("media: zoran: remove deprecated driver")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the ti-sysc source files under the OMAP2+ entry so that
the get_maintainer script also generates the linux-omap
list to be cc'd for all patches touching these files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
More fscrypt definitions are being added, and we shouldn't use a
disproportionate amount of space in <linux/fs.h> for fscrypt stuff.
So move the fscrypt definitions to a new header <linux/fscrypt.h>.
For source compatibility with existing userspace programs, <linux/fs.h>
still includes the new header.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
support for l3c devices. Done from immutable branch.
A counter subsystem patche in here as well.
Alongside the new device support (which is always good), Chuhong's work
on using devres managed APIs has cleaned up a number of drivers.
New device support
* adis16460
- New driver based on ADIS framework which needed addition of support
for cs_change_delay. Includes device tree binding.
* cros_ec
- Support fo the veyron-minnie which uses an older interface.
* lsm6dsx
- Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
- Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
* Maxim 5432
- New driver support MAX5432-MAX5435 family of potentiometers.
* noa1305
- New driver for this ON Semiconductor Ambient light sensor.
Features and cleanups
* tree wide
- Drop error prints after platform_get_irq as already prints errors
internally if any occur.
* docs
- Document mounting matrix.
- Fix a missing newline at end of file.
* ad2s1210
- Switch to device managed APIs for all of probe and drop explicit remove.
* ad7192
- Add of_device_id array to explicity handling DT bindings.
* ad7606
- Lots of rework leading to support for software configure modes in ad7616
parts.
- Debugfs register access support.
* am2315
- Switch to device managed APIs for all of probe and drop explicit remove.
* apds9960
- Typo in module description.
* cm36651
- Convert to i2c_new_dummy_device.
- Swithc to device managed APIs for all of probe adn drop explicit remove.
* cros_ec
- Calibscale support for accel, gyro and magnetometer.
- Tidy up some error codes to return the error from the stack rather than
-EIO.
- Determine protocol version.
- Add a sign vector to the core to fix sensor rotation if necessary.
Cannot just be done with mount matrix as already in use in many devices.
- Tidy up INFO_SCALE being in both the separate and shared lists.
- Drop a lot of dplicate code from the cros-ec-accel-legacy driver
and use the core provided code instead.
- Make frequency range available to userspace.
* counter / ftm-quaddec
- Switch to device managed APIs for all of probe adn drop explicit remove.
* hdc100x
- Switch to device managed APIs for all of probe and drop explicit remove.
* hi8435
- Use gpiod_set_value_cansleep as we don't care here and there is a
board out there where it needs to sleep.
- Switch to device managed APIs for all of probe and drop explict remove.
* hp03
- Convert to i2c_new_dummy_device.
* maxim thermocouple
- Switch to device managed APIs for all of probe and drop explicit remove.
* mmc35240
- Fix typo in constant naming.
* mpu6050
- Use devm_add_action_or_reset in place of explicit error handling.
- Make text in Kconfig more explicit about which parts are supported.
* mxc4005
- Switch to device managed APIs for all of probe and drop explicit remove.
* pms7003
- Convert device tree bindings to yaml.
- Add a MAINTAINERS entry
* sc27xx
- Introduce a local struct device *dev pointer to avoid lots of deref.
- Use devm_add_action_or_reset in place of explicit error handling.
* sca3000
- Typo fix in naming.
* si1145
- Switch to device managed APIs for all of probe and drop explicit remove.
* st_sensors
- Lots of rework to enable switch to regmap.
- Regmap conversion at the end.
- Tidy up some inconsistencies in buffer setup ops.
- Tidy up an oddity by dropping get_irq_data_ready function in favour
of direct access.
- Stop allocating buffer in buffer enable in favour of just embedding
a large enough constant size buffer in the iio_priv accessed structure.
* st_lsm6dsx
- l3c device support (LSM6DSO and LSM6DSR)
- tidy up irq return logic which was strangely written.
- fix up an ABI quirk where this driver used separate scale
attributes, even though they were always shared by type.
* stk33xx
- Device tree bindings include manufacturer ID.
* stm32-adc
- Add control for supply to analog switches including DT bindings.
* stm32 timer
- Drop the quadrature mode support. Believed there were no users so
take this opportunity to drop this unwanted ABI.
* tsl2772
- Switch to device mangage APIs for all of probe and drop explicit remove.
- Use regulator_bulk_* APIs to reduce repitition.
* veml6070
- Convert to i2c_new_dummy_device.
-----BEGIN PGP SIGNATURE-----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=aez5
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.4 cycle
Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
support for l3c devices. Done from immutable branch.
A counter subsystem patche in here as well.
Alongside the new device support (which is always good), Chuhong's work
on using devres managed APIs has cleaned up a number of drivers.
New device support
* adis16460
- New driver based on ADIS framework which needed addition of support
for cs_change_delay. Includes device tree binding.
* cros_ec
- Support fo the veyron-minnie which uses an older interface.
* lsm6dsx
- Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
- Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
* Maxim 5432
- New driver support MAX5432-MAX5435 family of potentiometers.
* noa1305
- New driver for this ON Semiconductor Ambient light sensor.
Features and cleanups
* tree wide
- Drop error prints after platform_get_irq as already prints errors
internally if any occur.
* docs
- Document mounting matrix.
- Fix a missing newline at end of file.
* ad2s1210
- Switch to device managed APIs for all of probe and drop explicit remove.
* ad7192
- Add of_device_id array to explicity handling DT bindings.
* ad7606
- Lots of rework leading to support for software configure modes in ad7616
parts.
- Debugfs register access support.
* am2315
- Switch to device managed APIs for all of probe and drop explicit remove.
* apds9960
- Typo in module description.
* cm36651
- Convert to i2c_new_dummy_device.
- Swithc to device managed APIs for all of probe adn drop explicit remove.
* cros_ec
- Calibscale support for accel, gyro and magnetometer.
- Tidy up some error codes to return the error from the stack rather than
-EIO.
- Determine protocol version.
- Add a sign vector to the core to fix sensor rotation if necessary.
Cannot just be done with mount matrix as already in use in many devices.
- Tidy up INFO_SCALE being in both the separate and shared lists.
- Drop a lot of dplicate code from the cros-ec-accel-legacy driver
and use the core provided code instead.
- Make frequency range available to userspace.
* counter / ftm-quaddec
- Switch to device managed APIs for all of probe adn drop explicit remove.
* hdc100x
- Switch to device managed APIs for all of probe and drop explicit remove.
* hi8435
- Use gpiod_set_value_cansleep as we don't care here and there is a
board out there where it needs to sleep.
- Switch to device managed APIs for all of probe and drop explict remove.
* hp03
- Convert to i2c_new_dummy_device.
* maxim thermocouple
- Switch to device managed APIs for all of probe and drop explicit remove.
* mmc35240
- Fix typo in constant naming.
* mpu6050
- Use devm_add_action_or_reset in place of explicit error handling.
- Make text in Kconfig more explicit about which parts are supported.
* mxc4005
- Switch to device managed APIs for all of probe and drop explicit remove.
* pms7003
- Convert device tree bindings to yaml.
- Add a MAINTAINERS entry
* sc27xx
- Introduce a local struct device *dev pointer to avoid lots of deref.
- Use devm_add_action_or_reset in place of explicit error handling.
* sca3000
- Typo fix in naming.
* si1145
- Switch to device managed APIs for all of probe and drop explicit remove.
* st_sensors
- Lots of rework to enable switch to regmap.
- Regmap conversion at the end.
- Tidy up some inconsistencies in buffer setup ops.
- Tidy up an oddity by dropping get_irq_data_ready function in favour
of direct access.
- Stop allocating buffer in buffer enable in favour of just embedding
a large enough constant size buffer in the iio_priv accessed structure.
* st_lsm6dsx
- l3c device support (LSM6DSO and LSM6DSR)
- tidy up irq return logic which was strangely written.
- fix up an ABI quirk where this driver used separate scale
attributes, even though they were always shared by type.
* stk33xx
- Device tree bindings include manufacturer ID.
* stm32-adc
- Add control for supply to analog switches including DT bindings.
* stm32 timer
- Drop the quadrature mode support. Believed there were no users so
take this opportunity to drop this unwanted ABI.
* tsl2772
- Switch to device mangage APIs for all of probe and drop explicit remove.
- Use regulator_bulk_* APIs to reduce repitition.
* veml6070
- Convert to i2c_new_dummy_device.
* tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (84 commits)
iio: hi8435: Drop hi8435_remove() by using devres for remaining elements
iio: hi8435: Use gpiod_set_value_cansleep()
iio:st_sensors: remove buffer allocation at each buffer enable
iio: imu: inv_mpu6050: be more explicit on supported chips
iio: light: noa1305: Add support for NOA1305
dt-bindings: Add binding document for NOA1305
iio: remove get_irq_data_ready() function pointer and use IRQ number directly
iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
iio: tsl2772: Use regulator_bulk_() APIs
iio: tsl2772: Use devm_iio_device_register
iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
iio: tsl2772: Use devm_add_action_or_reset
iio: Remove dev_err() usage after platform_get_irq()
iio: light: si1145: Use device-managed APIs
iio:pressure: preenable/postenable/predisable fixup for ST press buffer
iio:magn: preenable/postenable/predisable fixup for ST magn buffer
iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
iio:accel: preenable/postenable/predisable fixup for ST accel buffer
dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings
iio: imu: st_lsm6dsx: add support to ISM330DHCX
...
My @amarulasolutions.com address stopped working this July, so update
to my @gmail.com address where you'll still be able to reach me.
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
On some ARM based systems, a separate Cortex-M based System Control
Processor(SCP) provides the overall power, clock, reset and system
control. System Control and Management Interface(SCMI) Message Protocol
is defined for the communication between the Application Cores(AP)
and the SCP.
Adds support for the resets provided using SCMI protocol for performing
reset management of various devices present on the SoC. Various reset
functionalities are achieved by the means of different ARM SCMI device
operations provided by the ARM SCMI framework.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl1QegseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGavMH/RBaR39ct3XXpPzC
yxmKJn/n692NXFKusfsfasitGHMdFom6HaCcKx4PpzX1QHnR34LJtMd1QvwM8cHz
FtbC68HyZBB91JOUzC38GbRufvVUsSeXg8YeBiF6BOoOP06OcOG+DKoPcKBOMXsR
MtJmgxEyedLT7ozEPTpowVBWulELJxkbe1MCc93xDXdOqT+aMuxZBASMJIgrufS7
uJTsJ/afHz6F29Mj6Q9lfIJJSHqSfMK/rPGP54xRdBgMWmAmNjA2aExyCK8PE/Yb
TChsrDjDz38ePuVaWfjtwFNWlWcq0Do8vJdPuAxZDdfaJlQDXQHCWXsJjrWD6oNy
ZhCq0zE=
=HcEO
-----END PGP SIGNATURE-----
Merge tag 'v5.3-rc4' into next
Sync up with mainline to bring in device_property_count_u32 andother
newer APIs.
drm-next-5.4-2019-08-09:
Same as drm-next-5.4-2019-08-06, but with the
readq/writeq stuff fixed and 5.3-rc3 backmerged.
amdgpu:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- Enable mclk DPM for Navi
- Misc DC display fixes
- Add perfmon support for DF
- Add scatter/gather display support for Raven
- Improve SMU handling for GPU reset
- RAS support for GFX
- Drop last of drmP.h
- Add support for wiping memory on buffer release
- Allow cursor async updates for fb swaps
- Misc fixes and cleanups
amdkfd:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- CWSR trap handlers updates for gfx9, 10
- Drop last of drmP.h
- Update MAINTAINERS
radeon:
- Misc fixes and cleanups
- Make kexec more reliable by tearing down the GPU
ttm:
- Add release_notify callback
uapi:
- Add wipe memory on release flag for buffer creation
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: resolved conflicts with ttm resv moving]
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809184807.3381-1-alexander.deucher@amd.com
Here are some small char/misc driver fixes for 5.3-rc4.
Two of these are for the habanalabs driver for issues found when running
on a big-endian system (are they still alive?) The others are tiny
fixes reported by people, and a MAINTAINERS update about the location of
the fpga development tree.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXU6uwA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymBrQCfRh8brBuZ4ZoeP9aVgjkPDhwdBLkAn38RdH6c
96J1xGLZf1+CN7GVLnFD
=YUWU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes Greg KH:
"Here are some small char/misc driver fixes for 5.3-rc4.
Two of these are for the habanalabs driver for issues found when
running on a big-endian system (are they still alive?) The others are
tiny fixes reported by people, and a MAINTAINERS update about the
location of the fpga development tree.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
MAINTAINERS: Move linux-fpga tree to new location
nvmem: Use the same permissions for eeprom as for nvmem
habanalabs: fix host memory polling in BE architecture
habanalabs: fix F/W download in BE architecture
PSCI firmware is the standard power management control for
all ARM64 based platforms and it is also deployed on some
ARM 32 bit platforms to date.
Idle state entry in PSCI is currently achieved by calling
arm_cpuidle_init() and arm_cpuidle_suspend() in a generic
idle driver, which in turn relies on ARM/ARM64 CPUidle back-end
to relay the call into PSCI firmware if PSCI is the boot method.
Given that PSCI is the standard idle entry method on ARM64 systems
(which means that no other CPUidle driver are expected on ARM64
platforms - so PSCI is already a generic idle driver), in order to
simplify idle entry and code maintenance, it makes sense to have a PSCI
specific idle driver so that idle code that it is currently living in
drivers/firmware directory can be hoisted out of it and moved
where it belongs, into a full-fledged PSCI driver, leaving PSCI code
in drivers/firmware as a pure firmware interface, as it should be.
Implement a PSCI CPUidle driver. By default it is a silent Kconfig entry
which is left unselected, since it selection would clash with the
generic ARM CPUidle driver that provides a PSCI based idle driver
through the arm/arm64 arches back-ends CPU operations.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will@kernel.org>
- update fbdev git tree in MAINTAINERS file
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yQC5
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux
Pull fbdev fix from Bartlomiej Zolnierkiewicz:
"fbdev patches will now go to upstream through drm-misc tree for
improved maintainership and better integration testing so update
MAINTAINERS file accordingly"
* tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux:
MAINTAINERS: handle fbdev changes through drm-misc tree
Lots of small fixes at this time since we've received the ASoC
fix batch now.
- Some coverage in ASoC core mostly for minor issues like NULL
checks for DPCM and proper error handling in DAI instantiation
- A collection of small device-specific changes in various ASoC
codec and platform drivers
- OF-tree refcount fixes in a few ASoC drivers
- Fixes of memory leaks in the error paths of various ASoC / ALSA
drivers
- A workaround for a long-standing issue on AMD HD-audio device
- Updates of MAINTAINERS, mail addresses, file permission fixups
-----BEGIN PGP SIGNATURE-----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=avrM
-----END PGP SIGNATURE-----
Merge tag 'sound-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes at this time since we've received the ASoC fix
batch now.
- Some coverage in ASoC core mostly for minor issues like NULL checks
for DPCM and proper error handling in DAI instantiation
- A collection of small device-specific changes in various ASoC codec
and platform drivers
- OF-tree refcount fixes in a few ASoC drivers
- Fixes of memory leaks in the error paths of various ASoC / ALSA
drivers
- A workaround for a long-standing issue on AMD HD-audio device
- Updates of MAINTAINERS, mail addresses, file permission fixups"
* tag 'sound-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (38 commits)
ALSA: firewire: fix a memory leak bug
sound: fix a memory leak bug
ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457)
ALSA: hiface: fix multiple memory leak bugs
ALSA: hda - Don't override global PCM hw info flag
ALSA: usb-audio: fix a memory leak bug
ASoC: max98373: Remove executable bits
ASoC: amd: acp3x: use dma address for acp3x dma driver
ASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driver
ASoC: max98373: add 88200 and 96000 sampling rate support
ASoC: sun4i-i2s: Incorrect SR and WSS computation
MAINTAINERS: Update Intel ASoC drivers maintainers
ASoC: ti: davinci-mcasp: Correct slot_width posed constraint
ASoC: rockchip: Fix mono capture
ASoC: Intel: Fix some acpi vs apci typo in somme comments
ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode
ASoC: Fail card instantiation if DAI format setup fails
ASoC: SOF: Intel: hda: remove misleading error trace from IRQ thread
ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links
ASoC: dapm: fix a memory leak bug
...
fbdev patches will now go to upstream through drm-misc tree (IOW
starting with v5.4 merge window fbdev changes will be included in
DRM pull request) for improved maintainership and better integration
testing. Update MAINTAINERS file accordingly.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXUwPUAAKCRDj7w1vZxhR
xQ4lAQDK2ijx29YHeZspbOwP4Nwq95DFs1uQcSm5GvbRt1JSowD9EwkLeNfkPkel
Xv1Ts/Frgq7ckH2e2zkLPyCOFCHd0wA=
=rIUl
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
Add Zhou Wang as a maintainer for HiSilicon QM and ZIP controller driver.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add ECC support for Mellanox BlueField SoC DDR controller.
This requires SMC to the running Arm Trusted Firmware to report
what is the current memory configuration.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Shravan Kumar Ramani <sramani@mellanox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Joe rightly points out that we should be using the "Obsolete" status for
these two subsystems.
Also I got the path name wrong for the wusbcore tree.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 71ed79b0e4 ("USB: Move wusbcore and UWB to staging as it is obsolete")
Link: https://lore.kernel.org/r/20190808092509.GA20173@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renesas media binding documentation files use a naming schema of
'renesas,<module>.txt'. Rename the VIN and CSI-2 files to match this
pattern.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The UWB and wusbcore code is long obsolete, so let us just move the code
out of the real part of the kernel and into the drivers/staging/
location with plans to remove it entirely in a few releases.
Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
This reverts commit 684ca71259.
I overlooked that the Rev-by tag was given in advance assuming a fix was
made for the next revision.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This reverts commit d13ed84b19.
I overlooked that the Rev-by tag was given in advance assuming a fix was
made for the next revision.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
I'm leaving the role of amdkfd maintainer. Therefore, update the relevant
entry in the MAINTAINERS file with the name of the new maintainer.
Good Luck!
v3: update mailing list, file list (Alex)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> (v2)
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A relatively large batch of mostly unremarkable fixes here, a couple of
small core fixes for fairly obscure issues, more comment/email updates
with no code impact than usual and a bunch of small driver fixes.
The support for new sample rates in the max98373 driver is a fix for the
fact that the driver declared support for those rates but would in fact
return an error if these rates were selected.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl1IKi0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0NWqB/958QE+MLcaVNkjRAYSCGb56vzEUAlz
jXLuOvdlXWzEmuc6nV32a70KcFngXEvXHn9U+mB1pz45q4jacsghafFeWiL1Dq2E
UzLy2/FtZQtmAVMlxSwcdP1uJzAyfDchcyGJEO8QOIIXNDMSqEINdzGkfqCp8MDM
mHIz8pIW1FlAnZgXp+AWqgn0xrueUzjEiKr4IBp1BoaqOc4rXke823o/SekdNbyC
FkeMcb9LdTj22+DG8Z1DqOqjYHHx7/CwOcALjQlU2pK+3uGtOENXMYuwCcBKOIMc
DAbIlhXk+51fZ0r31vhjMrN7NkLqD/cNzn8QEzBJ7F3YckIDbbuu+uYH
=ENjL
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.3-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.3
A relatively large batch of mostly unremarkable fixes here, a couple of
small core fixes for fairly obscure issues, more comment/email updates
with no code impact than usual and a bunch of small driver fixes.
The support for new sample rates in the max98373 driver is a fix for the
fact that the driver declared support for those rates but would in fact
return an error if these rates were selected.
At the end of the v5.3 upstream kernel development cycle, Simon will be
stepping down from his role as Renesas SoC maintainer. Starting with
the v5.4 development cycle, Geert is taking over this role.
Add Geert as a co-maintainer, and add his git repository and branch.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Has not had any bake time or testing, since its just changes to a text file.
-----BEGIN PGP SIGNATURE-----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=bvqJ
-----END PGP SIGNATURE-----
Merge tag 'safesetid-maintainers-correction-5.3-rc2' of git://github.com/micah-morton/linux
Pull SafeSetID maintainer update from Micah Morton:
"Add entry in MAINTAINERS file for SafeSetID LSM"
* tag 'safesetid-maintainers-correction-5.3-rc2' of git://github.com/micah-morton/linux:
Add entry in MAINTAINERS file for SafeSetID LSM
This LSM was added in v5.1 and needs an entry in the MAINTAINERS file.
Signed-off-by: Micah Morton <mortonm@chromium.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Rename the bindings documentation file for Renesas EMEV2 IIC controller
from i2c-emev2.txt to renesas,iic-emev2.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rename the bindings documentation file for RIIC controller
from i2c-riic.txt to renesas,riic.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rename the bindings documentation file for R-Car I2C controller
from i2c-rcar.txt to renesas,rcar.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rename the bindings documentation file for sh_mobile I2C controller
from i2c-sh_mobile.txt to renesas,iic.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The filenames for cifs documentation is not using the same
convention as almost all Kernel documents is using. So,
rename them to a more appropriate name. Then, manually convert
the documentation files for CIFS to ReST.
By doing a manual conversion, we can preserve the original
author's style, while making it to look more like the other
Kernel documents.
Most of the conversion here is trivial. The most complex one was
the README file (which was renamed to usage.rst).
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Those are due to recent changes. Most of the issues
can be automatically fixed with:
$ ./scripts/documentation-file-ref-check --fix
The only exception was the sound binding with required
manual work.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are two README files there with doesn't have a .txt
extension nor are at ReST format.
In order to help with the docs conversion to ReST, rename those
and manually convert them to ReST format.
As there are lot more to be done for networking to be part of
the documentation body, for now mark those two files with
:orphan:, in order to supress a build warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Manually convert wimax documentation to ReST and add theit
to the Kernel doc body, inside the admin-guide.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Those two files describe userspace-faced information. While part of
it might fit on uAPI, it sounds to me that the admin guide is the
best place for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The packing.txt file was misplaced, as docs should be part of
a documentation book, and not at the root dir.
So, move it to the core-api directory and add to its index.
Also, ensure that the file will be properly parsed and the bitmap
ascii artwork will use a monotonic font.
Fixes: 554aae3500 ("lib: Add support for generic packing operations")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Convert each file at I2C subsystem, renaming them to .rst and
adding to the driver-api book.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This changes from plain text to reStructuredText as suggestion
in doc-guide [1]
[1] https://www.kernel.org/doc/html/latest/doc-guide/sphinx.html
Some adaptations such as: literal block, ``inline literal`` and
alignment text,...
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The file sysfs-bus-mdio got removed in favor of sysfs-class-net-phydev,
with contained a duplicated set of information.
Fixes: a6cd0d2d49 ("Documentation: net-sysfs: Remove duplicate PHY device documentation")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
I would like to maintain the floppy driver. After the recent fixes,
I think I know the code pretty well. Nowadays I've got 2 physical 3.5"
readers to test all the changes.
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes: 6e43650cee ("add maintainer for network drop monitor kernel service")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the driver to the new haven for tiny DRM drivers.
Cc: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-4-noralf@tronnes.org
The drm in tinydrm is superfluous so rename to tiny.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-3-noralf@tronnes.org
Move the linux-fpga tree to new location at:
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190725174517.10516-1-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This removes the mailing list xdp-newbies@vger.kernel.org from the XDP
kernel maintainers entry.
Being in the kernel MAINTAINERS file successfully caused the list to
receive kbuild bot warnings, syzbot reports and sometimes developer
patches. The level of details in these messages, doesn't match the
target audience of the XDP-newbies list. This is based on a survey on
the mailing list, where 73% voted for removal from MAINTAINERS file.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Legacy platform data must go away. We are on the safe side here since
there are no users of it in the kernel.
If anyone by any odd reason needs it the GPIO lookup tables and
built-in device properties at your service.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fs-verity will be jointly maintained by Eric Biggers and Theodore Ts'o.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Here are some small char and misc driver fixes for 5.3-rc2 to resolve
some reported issues.
Nothing major at all, some binder bugfixes for issues found, some new
mei device ids, firmware building warning fixes, habanalabs fixes, a few
other build fixes, and a MAINTAINERS update.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXT2L1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynVaQCfbYmj0QWJhL5rVvrUOcdXppa3qxgAn1Pi5+hf
V3OH/1OmAnY8E07HA1Y3
=qVrq
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.3-rc2 to resolve
some reported issues.
Nothing major at all, some binder bugfixes for issues found, some new
mei device ids, firmware building warning fixes, habanalabs fixes, a
few other build fixes, and a MAINTAINERS update.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
test_firmware: fix a memory leak bug
hpet: Fix division by zero in hpet_time_div()
eeprom: make older eeprom drivers select NVMEM_SYSFS
vmw_balloon: Remove Julien from the maintainers list
fpga-manager: altera-ps-spi: Fix build error
mei: me: add mule creek canyon (EHL) device ids
binder: prevent transactions to context manager from its own process.
binder: Set end of SG buffer area properly.
firmware: Fix missing inline
firmware: fix build errors in paged buffer handling code
habanalabs: don't reset device when getting VRHOT
habanalabs: use %pad for printing a dma_addr_t
This change adds device-tree bindings for the ADIS16460.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADIS16460 device is a complete inertial system that includes a triaxial
gyroscope and a triaxial accelerometer. It's more simplified design than
that of the ADIS16480, and does not offer the triaxial magnetometers &
pressure sensors. It does also have a temperature sensor (like the
ADIS16480).
Since it is part of the ADIS16XXX family, it re-uses parts of the ADIS
library.
Naturally, the register map is different and much more simplified than the
ADIS16480 subfamily, so it cannot be integrated into that driver. A major
difference is that the registers are not paged.
One thing that is particularly special about it, is that it requires a
higher delay between CS changes (i.e. when CS goes up, the spec recommends
that it be brought down after a minimum of 16 uS).
Other ADIS chips require (via spec) a minimum of 2 uS between CS changes.
The kernel's 10 uS default should be fine for those other chips; they
haven't been tested with lower CS change delays yet.
Datasheet:
https://www.analog.com/media/en/technical-documentation/data-sheets/adis16460.pdf
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Dutch consumer grade ISDN network will be shut down on September 1,
2019. This means I'll be converted to some sort of VOIP shortly. At that
point it would be unwise to try to maintain the gigaset driver, even for
odd fixes as I do. So I'll stop maintaining it as a seperate driver and
bump support to CAPI in staging. De facto this means the driver will be
unmaintained, since no-one seems to be working on CAPI.
I've lighty tested the hardware specific modules of this driver (bas-gigaset,
ser-gigaset, and usb-gigaset) for v5.3-rc1. The basic functionality appears to
be working. It's unclear whether anyone still cares. I'm aware of only one
person sort of using the driver a few years ago.
Thanks to Karsten Keil for the ISDN subsystems gigaset was using (I4L and
CAPI). And many thanks to Hansjoerg Lipp and Tilman Schmidt for writing and
upstreaming this driver.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add myself as a plantower pms7003 driver maintainer.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Add ABI to kernel image file which allows e.g. the file utility to figure
out the kernel version.
- Wire up clone3 system call.
- Add support for kasan bitops instrumentation.
- uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.
- Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly defined
with 2 GB instead of the default value of 1 MB.
- Farhan Ali leaves the group of vfio-ccw maintainers.
- Various small vfio-ccw fixes.
- Add missing locking for airq_areas array in virtio code.
- Minor qdio improvements.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=J+rB
-----END PGP SIGNATURE-----
Merge tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add ABI to kernel image file which allows e.g. the file utility to
figure out the kernel version.
- Wire up clone3 system call.
- Add support for kasan bitops instrumentation.
- uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.
- Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly
defined with 2 GB instead of the default value of 1 MB.
- Farhan Ali leaves the group of vfio-ccw maintainers.
- Various small vfio-ccw fixes.
- Add missing locking for airq_areas array in virtio code.
- Minor qdio improvements.
* tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: vfio-ccw: Remove myself as the maintainer
s390/mm: use shared variables for sysctl range check
virtio/s390: fix race on airq_areas[]
s390/dma: provide proper ARCH_ZONE_DMA_BITS value
s390/kasan: add bitops instrumentation
s390/bitops: make test functions return bool
s390: wire up clone3 system call
kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
s390/hypfs: fix a typo in the name of a function
s390/qdio: restrict QAOB usage to IQD unicast queues
s390/qdio: add sanity checks to the fast-requeue path
s390: enable detection of kernel version from bzImage
Documentation: fix vfio-ccw doc
vfio-ccw: Update documentation for csch/hsch
vfio-ccw: Don't call cp_free if we are processing a channel program
vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
vfio-ccw: Fix memory leak and don't call cp_free in cp_init
vfio-ccw: Fix misleading comment when setting orb.cmd.c64
There are some documentation scripts I wrote with doesn't
have any maintainer at maintainer's file.
Add them to the DOCUMENTATION entry, in order to have
Jon and linux-doc ML c/c on those patches, plus a new
entry to ensure that I'll be c/c when people send patches
to those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
from the massive RST conversion; a few other small fixes as well.
-----BEGIN PGP SIGNATURE-----
iQFCBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl07C9gPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YQrgH+L7kPaRWcH+lorh7WxiIhlAvqFsR4xjRKTZV
qZwlv3+87qjPu86DBdjRlos8PsoIkdD4+jH0u+7swYtZ5hsS8DYcfZ42i+nHqP7D
k/XwVPW71ikpoi4vQVsO9zrwaOKPyL8AoNzlj+VpiVGAu/PYApGUfdkdOD0xxlOW
hst6GKNAKrsoQ8fW3AIuCVi4oEEYru2FHMKLcpHBFDZtR7zgC4dEgs7UqEttAzHU
559nkH2LKekya4pQaFMdSb6Wgj+JeIkI2XzujXES6QEdmf8vrvjkkvHeByoOYjNY
NNdKNGhPUWrEUMfyzRQpEIcF+Dk3lYtBEDQO8+XCh6mpa9h7kQ==
=BUU+
-----END PGP SIGNATURE-----
Merge tag 'docs-5.3-1' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"This is mostly a set of follow-on fixes from Mauro fixing various
fallout from the massive RST conversion; a few other small fixes as
well"
* tag 'docs-5.3-1' of git://git.lwn.net/linux: (21 commits)
docs: phy: Drop duplicate 'be made'
doc:it_IT: translations in process/
docs/vm: transhuge: fix typo in madvise reference
doc:it_IT: rephrase statement
doc:it_IT: align translation to mainline
docs: load_config.py: ensure subdirs end with "/"
docs: virtual: add it to the documentation body
docs: remove extra conf.py files
docs: load_config.py: avoid needing a conf.py just due to LaTeX docs
scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output
scripts/sphinx-pre-install: cleanup Gentoo checks
scripts/sphinx-pre-install: fix latexmk dependencies
scripts/sphinx-pre-install: don't use LaTeX with CentOS 7
scripts/sphinx-pre-install: fix script for RHEL/CentOS
docs: conf.py: only use CJK if the font is available
docs: conf.py: add CJK package needed by translations
docs: pdf: add all Documentation/*/index.rst to PDF output
docs: fix broken doc references due to renames
docs: power: add it to to the main documentation index
docs: powerpc: convert docs to ReST and rename to *.rst
...
- Big bad batch of MAINTAINERS updates
- Fix handling of SP alignment fault exceptions
- Fix PSTATE.SSBS handling on heterogeneous systems
- Fix fallout from moving to the generic vDSO implementation
- Fix stack unwinding in the face of frame corruption
- Fix off-by-one in IORT code
- Minor SVE cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl062dMACgkQt6xw3ITB
YzQD9Qf+LvNj+i1UaVUjmUTAhThbIiPZPcz9rkeMc50AZl7O8XlRH8p4z8lWMJ8l
sAqfsDAAdVsKOJPFYWnV432z5VmUNfwaw8Mjlx2Ij1I4C2lbA9fr5uW4Umn7s/B3
IpbD4nFBt4UX24Ps3YD5fbrdTBtMsBiDRBxzTBouTalfP+nT/d1PB50CqCUBFEJ4
hYoG2IbfsAOPVDnH33J3svehWJn7RerfbgX0Mb4ssxeonswuNdiYUnzUfkJuvVuW
lWaUck4G0y5tWmULQLn7n9RVgBMq1hWE/731gRhtR4hiHA79ml8b2AggnosIwfLO
064KsHGrb4+jUUNQ1KIQzTU3sKdkVg==
=nLT9
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's more here than we usually have at this stage, but that's
mainly down to the stacktrace changes which came in slightly too late
for the merge window.
Summary:
- Big bad batch of MAINTAINERS updates
- Fix handling of SP alignment fault exceptions
- Fix PSTATE.SSBS handling on heterogeneous systems
- Fix fallout from moving to the generic vDSO implementation
- Fix stack unwinding in the face of frame corruption
- Fix off-by-one in IORT code
- Minor SVE cleanups"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
arm64: entry: SP Alignment Fault doesn't write to FAR_EL1
arm64: Force SSBS on context switch
MAINTAINERS: Update my email address
MAINTAINERS: Update my email address
MAINTAINERS: Fix spelling mistake in my name
MAINTAINERS: Update my email address to @kernel.org
arm64: mm: Drop pte_huge()
arm64/sve: Fix a couple of magic numbers for the Z-reg count
arm64/sve: Factor out FPSIMD to SVE state conversion
arm64: stacktrace: Better handle corrupted stacks
arm64: stacktrace: Factor out backtrace initialisation
arm64: stacktrace: Constify stacktrace.h functions
arm64: vdso: Cleanup Makefiles
arm64: vdso: fix flip/flop vdso build bug
arm64: vdso: Fix population of AT_SYSINFO_EHDR for compat vdso
I will not be able to continue with my maintainership responsibilities
going forward, so remove myself as the maintainer.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tony will start to officially maintain EDAC trees. Also, we'll
be using a single tree for the EDAC development.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Four minor RISC-V-related changes for v5.3-rc2:
- Add support for the new clone3 syscall for RV64, relying on the
generic support
- Add DT data for the gigabit Ethernet controller on the SiFive FU540
and the HiFive Unleashed board
- Update MAINTAINERS to add me to the arch/riscv maintainers' list
- Add support for PCIe message-signaled interrupts by reusing the
generic header file
-----BEGIN PGP SIGNATURE-----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=z0UB
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Four minor RISC-V-related changes:
- Add support for the new clone3 syscall for RV64, relying on the
generic support
- Add DT data for the gigabit Ethernet controller on the SiFive FU540
and the HiFive Unleashed board
- Update MAINTAINERS to add me to the arch/riscv maintainers' list
- Add support for PCIe message-signaled interrupts by reusing the
generic header file"
* tag 'riscv/for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT node for SiFive FU540 Ethernet controller driver
riscv: include generic support for MSI irqdomains
MAINTAINERS: Add Paul as a RISC-V maintainer
riscv: enable sys_clone3 syscall for rv64
Introduces a concept of external buffers, which is a mechanism for creating
trace sinks that would receive trace data from MSC buffers and transfer it
elsewhere.
A external buffer can implement its own window allocation/deallocation if
it has to. It must provide a callback that's used to notify it when a
window fills up, so that it can then start a DMA transaction from that
window 'elsewhere'. This window remains in a 'locked' state and won't be
used for storing new trace data until the buffer 'unlocks' it with a
provided API call, at which point the window can be used again for storing
trace data.
This relies on a functional "last block" interrupt, so not all versions of
Trace Hub can use this feature, which does not reflect on existing users.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190705141425.19894-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tinydrm is just a collection of tiny drivers now.
Add T: drm-misc entry for tinydrm drivers that lacks it.
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-10-noralf@tronnes.org
I've been spending quite a bit of time fixing and
preventing bit rot in the core TLS code. TLS seems
to only be growing in importance, I'd like to help
ensuring the quality of our implementation.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdOEuhAAoJEL/70l94x66DX/IH/3c6ADaZkuwzUMtJZgib/slX
V7h4ljoW33M85z3nCF5+kY3CNl8c9F2xKGcAIUlJF8MIsZW+zB3HjuU1LC4fCzuk
TqpBf74DpQsKCsv1ngiV02lefPVQ7/VT/QFY7EXNuAqNRfgsBRNoi50244a0ZKpD
KydzKTDKMD5HjE4lHb+bNr+guqkisPx0b0mZtsb4R9uuUSwXEa8DLmWQF2Do7zBj
6G9UD6a1AP5XQBwRRbo5a78b5NZQcF5R9wVEzsmK7OGUw/yC4Em4HVt46z+oT5cm
JK9m59XDqJaL6HMAWC2P/mXUj6o+PP+uBE2uuvkGCNcTLQZwWf+dq9961tWg81E=
=DD/Z
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes, a pvspinlock optimization, and documentation moving"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption
Documentation: move Documentation/virtual to Documentation/virt
KVM: nVMX: Set cached_vmcs12 and cached_shadow_vmcs12 NULL after free
KVM: X86: Dynamically allocate user_fpu
KVM: X86: Fix fpu state crash in kvm guest
Revert "kvm: x86: Use task structs fpu field for user"
KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested
Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories. We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory. Fix up the documentation
to match that.
Fixes: ed16648eb5 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds missing files to the CAN NETWORK DRIVERS and CAN NETWORK
LAYER entry.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The hardware has been declared EOL by the vendor more than 5 years ago.
What's more relevant to the Linux kernel is that the quality of this driver
is not on par with many other mainline drivers.
Cc: Manish Chopra <manishc@marvell.com>
Message-id: <20190617074858.32467-1-bpoirier@suse.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
get_maintainer.pl only returns linux-kernel@vger.kernel.org for the
drivers/soc/ux500/ files - fix it by adding drivers/soc/ux500/ entry
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The RISC-V port has grown significantly over the past year. Paul's been
helping out for a while ago. We agreed in person that he'd take over
collecting the patches and submitting the PRs, but it looks like I
forgot to make it official.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
arm and arm64 shared lot of CPU topology related code. This was
consolidated under driver/base/arch_topology.c by Juri. Now RISC-V
is also started sharing the same code pulling more code from arm64
into arch_topology.c
Since I was involved in the review from the beginning, I would like
to assume maintenance for the same.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Update MAINTAINERS and .mailmap with my @linaro.org address, since I
don't have access to my @arm.com address anymore.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
My @arm.com address will stop working in a couple of weeks. Update
MAINTAINERS and .mailmap files with an address I'll have access to.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Fix a typo in my name for the KVM-ARM reviewers entry.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
I will soon lose access to my @arm.com email address, so let's
update the MAINTAINERS file to point to my @kernel.org address,
as well as .mailmap for good measure.
Note that my @arm.com address will still work, but someone else
will be reading whatever is sent there. Don't say you didn't know!
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
For some SoCs, the CPU frequency subset and voltage value of each OPP
varies based on the silicon variant in use. The sun50i-cpufreq-nvmem
driver reads the efuse value from the SoC to provide the OPP framework
with required information.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds support for the FlySky FS-iA6B RC receiver (serial IBUS).
It allows the usage of the FlySky FS-i6 and other AFHDS compliant remote
controls as a joystick input device.
To use it, a patch to inputattach which adds the FS-iA6B as a 115200 baud
serial device is required. I will upstream it after this patch is merged.
More information about the hardware can be found here:
https://notsyncing.net/?p=blog&b=2018.linux-fsia6b
Signed-off-by: Markus Koch <markus@notsyncing.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a modesetting driver for Grain Media GM12U320 based devices
(primarily Acer C120 projector, but there may be compatible devices).
This is based on the fb driver from Viacheslav Nurmekhamitov:
https://github.com/slavrn/gm12u320
This driver uses drm_simple_display_pipe to deal with all the atomic
stuff, gem_shmem_helper functions for buffer management and
drm_fbdev_generic_setup for fbdev emulation, so that leaves the driver
itself with only the actual code for talking to the gm12u320 chip,
leading to a nice simple and clean driver.
Changes in v2:
-Add drm-misc tree to MAINTAINERS
-Drop mode_config.preferred_depth = 24 / fix fbdev support
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721132525.10396-1-hdegoede@redhat.com
Pull x86 fixes from Thomas Gleixner:
"A set of x86 specific fixes and updates:
- The CR2 corruption fixes which store CR2 early in the entry code
and hand the stored address to the fault handlers.
- Revert a forgotten leftover of the dropped FSGSBASE series.
- Plug a memory leak in the boot code.
- Make the Hyper-V assist functionality robust by zeroing the shadow
page.
- Remove a useless check for dead processes with LDT
- Update paravirt and VMware maintainers entries.
- A few cleanup patches addressing various compiler warnings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Prevent clobbering of saved CR2 value
x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
x86, boot: Remove multiple copy of static function sanitize_boot_params()
x86/boot/compressed/64: Remove unused variable
x86/boot/efi: Remove unused variables
x86/mm, tracing: Fix CR2 corruption
x86/entry/64: Update comments and sanity tests for create_gap
x86/entry/64: Simplify idtentry a little
x86/entry/32: Simplify common_exception
x86/paravirt: Make read_cr2() CALLEE_SAVE
MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
x86/process: Delete useless check for dead process with LDT
x86: math-emu: Hide clang warnings for 16-bit overflow
x86/e820: Use proper booleans instead of 0/1
x86/apic: Silence -Wtype-limits compiler warnings
x86/mm: Free sme_early_buffer after init
x86/boot: Fix memory leak in default_get_smp_config()
Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
- s390 support for KVM selftests
- LAPIC timer offloading to housekeeping CPUs
- Extend an s390 optimization for overcommitted hosts to all architectures
- Debugging cleanups and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdMr1FAAoJEL/70l94x66DvIkH/iVuUX9jO1NoQ7qhxeo04MnT
GP9mX3XnWoI/iN0zAIRfQSP2/9a6+KblgdiziABhju58j5dCfAZGb5793TQppweb
3ubl11vy7YkzaXJ0b35K7CFhOU9oSlHHGyi5Uh+yyje5qWNxwmHpizxjynbFTKb6
+/S7O2Ua1VrAVvx0i0IRtwanIK/jF4dStVButgVaVdUva3zLaQmeI71iaJl9ddXY
bh50xoYua5Ek6+ENi+nwCNVy4OF152AwDbXlxrU0QbeA1B888Qio7nIqb3bwwPpZ
/8wMVvPzQgL7RmgtY5E5Z4cCYuu7mK8wgGxhuk3oszlVwZJ5rmnaYwGEl4x1s7o=
=giag
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"Mostly bugfixes, but also:
- s390 support for KVM selftests
- LAPIC timer offloading to housekeeping CPUs
- Extend an s390 optimization for overcommitted hosts to all
architectures
- Debugging cleanups and improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: x86: Add fixed counters to PMU filter
KVM: nVMX: do not use dangling shadow VMCS after guest reset
KVM: VMX: dump VMCS on failed entry
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup
KVM: Boost vCPUs that are delivering interrupts
KVM: selftests: Remove superfluous define from vmx.c
KVM: SVM: Fix detection of AMD Errata 1096
KVM: LAPIC: Inject timer interrupt via posted interrupt
KVM: LAPIC: Make lapic timer unpinned
KVM: x86/vPMU: reset pmc->counter to 0 for pmu fixed_counters
KVM: nVMX: Ignore segment base for VMX memory operand when segment not FS or GS
kvm: x86: ioapic and apic debug macros cleanup
kvm: x86: some tsc debug cleanup
kvm: vmx: fix coccinelle warnings
x86: kvm: avoid constant-conversion warning
x86: kvm: avoid -Wsometimes-uninitized warning
KVM: x86: expose AVX512_BF16 feature to guest
KVM: selftests: enable pgste option for the linker on s390
KVM: selftests: Move kvm_create_max_vcpus test to generic code
...
Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
- A driver for SCU (system control) on NXP i.MX8QXP
- Qualcomm Always-on Subsystem messaging driver (AOSS QMP)
- Qualcomm PM support for MSM8998
- Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
- Reset controller support for Bitmain BM1880
- TI SCI (System Control Interface) support for CPU control on AM654
processors
- More TI sysc refactoring and rework
-----BEGIN PGP SIGNATURE-----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=ek+j
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
- A driver for SCU (system control) on NXP i.MX8QXP
- Qualcomm Always-on Subsystem messaging driver (AOSS QMP)
- Qualcomm PM support for MSM8998
- Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
- Reset controller support for Bitmain BM1880
- TI SCI (System Control Interface) support for CPU control on AM654
processors
- More TI sysc refactoring and rework"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
reset: remove redundant null check on pointer dev
soc: rockchip: work around clang warning
dt-bindings: reset: imx7: Fix the spelling of 'indices'
soc: imx: Add i.MX8MN SoC driver support
soc: aspeed: lpc-ctrl: Fix probe error handling
soc: qcom: geni: Add support for ACPI
firmware: ti_sci: Fix gcc unused-but-set-variable warning
firmware: ti_sci: Use the correct style for SPDX License Identifier
soc: imx8: Use existing of_root directly
soc: imx8: Fix potential kernel dump in error path
firmware/psci: psci_checker: Park kthreads before stopping them
memory: move jedec_ddr.h from include/memory to drivers/memory/
memory: move jedec_ddr_data.c from lib/ to drivers/memory/
MAINTAINERS: Remove myself as qcom maintainer
soc: aspeed: lpc-ctrl: make parameter optional
soc: qcom: apr: Don't use reg for domain id
soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
memory: tegra: Fix -Wunused-const-variable
firmware: tegra: Early resume BPMP
soc/tegra: Select pinctrl for Tegra194
...
SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus Walleij--
the SoC doesn't have active maintainers with hardware, and in
discussions with the vendor the agreement was that it's OK to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support.
-----BEGIN PGP SIGNATURE-----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=FX6e
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus
Walleij-- the SoC doesn't have active maintainers with hardware,
and in discussions with the vendor the agreement was that it's OK
to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: stm32: use "depends on" instead of "if" after prompt
ARM: sa1100: convert to common clock framework
ARM: exynos: Cleanup cppcheck shifting warning
ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
ARM: exynos: Only build MCPM support if used
arm: add missing include platform-data/atmel.h
ARM: davinci: Use GPIO lookup table for DA850 LEDs
ARM: OMAP2: drop explicit assembler architecture
ARM: use arch_extension directive instead of arch argument
ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
ARM: riscpc: enable chained scatterlist support
ARM: riscpc: reduce IRQ handling code
ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
ARM: riscpc: parse video information from tagged list
ARM: riscpc: add ecard quirk for Atomwide 3port serial card
MAINTAINERS: mvebu: Add git entry
soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
ARM: OMAP2+: Make some variables static
...
nouveau:
- bugfixes + TU116 enabling (minor iteration):w
amdgpu:
- large pile of fixes for new hw support this release (navi, vega20)
- audio hotplug fix
- bunch of corner cases and small fixes all over for amdgpu/kfd
komeda:
- back out some new properties (from this merge window) that needs
more pondering.
bochs: fb pitch setup
... plus a new panel quirk
-----BEGIN PGP SIGNATURE-----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=s190
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave is back in shape, but now family got it so I'm doing the pull.
Two things worthy of note:
- nouveau feature pull was way too late, Dave&me decided to not take
that, so Ben spun up a pull with just the fixes.
- after some chatting with the arm display maintainers we decided to
change a bit how that's maintained, for more oversight/review and
cross vendor collab.
More details below:
nouveau:
- bugfixes
- TU116 enabling (minor iteration) :w
amdgpu:
- large pile of fixes for new hw support this release (navi, vega20)
- audio hotplug fix
- bunch of corner cases and small fixes all over for amdgpu/kfd
komeda:
- back out some new properties (from this merge window) that needs
more pondering.
bochs:
- fb pitch setup
core:
- a new panel quirk
- misc fixes"
* tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits)
drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug
drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP
drm/nouveau: fix memory leak in nouveau_conn_reset()
drm/nouveau/dmem: missing mutex_lock in error path
drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau/i2c: Enable i2c pads & busses during preinit
drm/nouveau/disp/tu102-: wire up scdc parameter setter
drm/nouveau/core: recognise TU116 chipset
drm/nouveau/kms: disallow dual-link harder if hdmi connection detected
drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling
drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes
drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89.
drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq
drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers
drm/amd/display: Force uclk to max for every state
drm/amdkfd: Remove GWS from process during uninit
drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface
drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware
...
- Regroup the fs/iomap.c code by major functional area so that we can
start development for 5.4 from a more stable base.
-----BEGIN PGP SIGNATURE-----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=3uGR
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap split/cleanup from Darrick Wong:
"As promised, here's the second part of the iomap merge for 5.3, in
which we break up iomap.c into smaller files grouped by functional
area so that it'll be easier in the long run to maintain cohesiveness
of code units and to review incoming patches. There are no functional
changes and fs/iomap.c split cleanly.
Summary:
- Regroup the fs/iomap.c code by major functional area so that we can
start development for 5.4 from a more stable base"
* tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: move internal declarations into fs/iomap/
iomap: move the main iteration code into a separate file
iomap: move the buffered IO code into a separate file
iomap: move the direct IO code into a separate file
iomap: move the SEEK_HOLE code into a separate file
iomap: move the file mapping reporting code into a separate file
iomap: move the swapfile code into a separate file
iomap: start moving code to fs/iomap/
Pull networking fixes from David Miller:
1) Fix AF_XDP cq entry leak, from Ilya Maximets.
2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit.
3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika.
4) Fix handling of neigh timers wrt. entries added by userspace, from
Lorenzo Bianconi.
5) Various cases of missing of_node_put(), from Nishka Dasgupta.
6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing.
7) Various RDS layer fixes, from Gerd Rausch.
8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from
Cong Wang.
9) Fix FIB source validation checks over loopback, also from Cong Wang.
10) Use promisc for unsupported number of filters, from Justin Chen.
11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits)
tcp: fix tcp_set_congestion_control() use from bpf hook
ag71xx: fix return value check in ag71xx_probe()
ag71xx: fix error return code in ag71xx_probe()
usb: qmi_wwan: add D-Link DWM-222 A2 device ID
bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips.
net: dsa: sja1105: Fix missing unlock on error in sk_buff()
gve: replace kfree with kvfree
selftests/bpf: fix test_xdp_noinline on s390
selftests/bpf: fix "valid read map access into a read-only array 1" on s390
net/mlx5: Replace kfree with kvfree
MAINTAINERS: update netsec driver
ipv6: Unlink sibling route in case of failure
liquidio: Replace vmalloc + memset with vzalloc
udp: Fix typo in net/ipv4/udp.c
net: bcmgenet: use promisc for unsupported filters
ipv6: rt6_check should return NULL if 'from' is NULL
tipc: initialize 'validated' field of received packets
selftests: add a test case for rp_filter
fib: relax source validation check for loopback packets
mlxsw: spectrum: Do not process learned records with a dummy FID
...
Alexei Starovoitov says:
====================
pull-request: bpf 2019-07-18
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) verifier precision propagation fix, from Andrii.
2) BTF size fix for typedefs, from Andrii.
3) a bunch of big endian fixes, from Ilya.
4) wide load from bpf_sock_addr fixes, from Stanislav.
5) a bunch of misc fixes from a number of developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Hugepage support
- "Image" header support for RISC-V kernel binaries, compatible with
the current ARM64 "Image" header
- Initial page table setup now split into two stages
- CONFIG_SOC support (starting with SiFive SoCs)
- Avoid reserving memory between RAM start and the kernel in setup_bootmem()
- Enable high-res timers and dynamic tick in the RV64 defconfig
- Remove long-deprecated gate area stubs
- MAINTAINERS updates to switch to the newly-created shared RISC-V git
tree, and to fix a get_maintainers.pl issue for patches involving
SiFive E-mail addresses
Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:
- Fix build break after macro-to-function conversion in
asm-generic/cacheflush.h
-----BEGIN PGP SIGNATURE-----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=SVSp
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Hugepage support
- "Image" header support for RISC-V kernel binaries, compatible with
the current ARM64 "Image" header
- Initial page table setup now split into two stages
- CONFIG_SOC support (starting with SiFive SoCs)
- Avoid reserving memory between RAM start and the kernel in
setup_bootmem()
- Enable high-res timers and dynamic tick in the RV64 defconfig
- Remove long-deprecated gate area stubs
- MAINTAINERS updates to switch to the newly-created shared RISC-V git
tree, and to fix a get_maintainers.pl issue for patches involving
SiFive E-mail addresses
Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:
- Fix build break after macro-to-function conversion in
asm-generic/cacheflush.h
* tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix build break after macro-to-function conversion in generic cacheflush.h
RISC-V: Add an Image header that boot loader can parse.
RISC-V: Setup initial page tables in two stages
riscv: remove free_initrd_mem
riscv: ccache: Remove unused variable
riscv: Introduce huge page support for 32/64bit kernel
x86, arm64: Move ARCH_WANT_HUGE_PMD_SHARE config in arch/Kconfig
RISC-V: Fix memory reservation in setup_bootmem()
riscv: defconfig: enable SOC_SIFIVE
riscv: select SiFive platform drivers with SOC_SIFIVE
arch: riscv: add config option for building SiFive's SoC resource
riscv: Remove gate area stubs
MAINTAINERS: change the arch/riscv git tree to the new shared tree
MAINTAINERS: don't automatically patches involving SiFive to the linux-riscv list
RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS
Add myself to maintainers since i provided the XDP and page_pool
implementation
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Bring fs/xfs/libxfs/xfs_trans_inode.c in sync with userspace libxfs.
- Convert the xfs administrator guide to rst and move it into the
official admin guide under Documentation
-----BEGIN PGP SIGNATURE-----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=+DS3
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.3-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs cleanups from Darrick Wong:
"We had a few more lateish cleanup patches come in for 5.3 -- a couple
of syncups with the userspace libxfs code and a conversion of the XFS
administrator's guide to ReST format.
Summary:
- Bring fs/xfs/libxfs/xfs_trans_inode.c in sync with userspace
libxfs.
- Convert the xfs administrator guide to rst and move it into the
official admin guide under Documentation"
* tag 'xfs-5.3-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
Documentation: filesystem: Convert xfs.txt to ReST
xfs: sync up xfs_trans_inode with userspace
xfs: move xfs_trans_inode.c to libxfs/
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported
for now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing inconsistencies
with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF
GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i
aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b
kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx
hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD
J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW
=Bgxr
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Lots of exciting things this time!
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported for
now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing
inconsistencies with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer"
* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
ceph: fix end offset in truncate_inode_pages_range call
ceph: use generic_delete_inode() for ->drop_inode
ceph: use ceph_evict_inode to cleanup inode's resource
ceph: initialize superblock s_time_gran to 1
MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
rbd: setallochint only if object doesn't exist
rbd: support for object-map and fast-diff
rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
libceph: export osd_req_op_data() macro
libceph: change ceph_osdc_call() to take page vector for response
libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
rbd: new exclusive lock wait/wake code
rbd: quiescing lock should wait for image requests
rbd: lock should be quiesced on reacquire
rbd: introduce copyup state machine
rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
rbd: move OSD request allocation into object request state machines
rbd: factor out __rbd_osd_setup_discard_ops()
rbd: factor out rbd_osd_setup_copyup()
rbd: introduce obj_req->osd_reqs list
...
- Add MMIO interface support to the Intel RAPL power capping
driver and update the int340X thermal driver to provide a
RAPL MMIO interface (Zhang Rui, Stephen Rothwell).
- Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui,
Rajneesh Bhardwaj).
- Make cpufreq use the PM QoS framework (instead of notifiers) for
managing the min and max frequency constraints (Viresh Kumar).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
-----BEGIN PGP SIGNATURE-----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=Svee
-----END PGP SIGNATURE-----
Merge tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These modify the Intel RAPL driver to allow it to use an MMIO
interface to the hardware, make the int340X thermal driver provide
such an interface for it, add Intel Ice Lake CPU IDs to the RAPL
driver (these changes depend on the previously merged x86 arch
changes), update cpufreq to use the PM QoS framework for managing the
min and max frequency limits, and add update the imx-cpufreq-dt
cpufreq driver to support i.MX8MN.
Specifics:
- Add MMIO interface support to the Intel RAPL power capping driver
and update the int340X thermal driver to provide a RAPL MMIO
interface (Zhang Rui, Stephen Rothwell).
- Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh
Bhardwaj).
- Make cpufreq use the PM QoS framework (instead of notifiers) for
managing the min and max frequency constraints (Viresh Kumar).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang)"
* tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
cpufreq: Make cpufreq_generic_init() return void
intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state
powercap/rapl: Add Ice Lake NNPI support to RAPL driver
powercap/intel_rapl: add support for ICX-D
powercap/intel_rapl: add support for ICX
powercap/intel_rapl: add support for IceLake desktop
intel_rapl: Fix module autoloading issue
int340X/processor_thermal_device: add support for MMIO RAPL
intel_rapl: support two power limits for every RAPL domain
intel_rapl: support 64 bit register
intel_rapl: abstract RAPL common code
intel_rapl: cleanup hardcoded MSR access
intel_rapl: cleanup some functions
intel_rapl: abstract register access operations
intel_rapl: abstract register address
intel_rapl: introduce struct rapl_if_private
intel_rapl: introduce intel_rapl.h
intel_rapl: remove hardcoded register index
intel_rapl: use reg instead of msr
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
...
Merge floppy ioctl verification fixes from Denis Efremov.
This also marks the floppy driver as orphaned - it turns out that Jiri
no longer has working hardware.
Actual working physical floppy hardware is getting hard to find, and
while Willy was able to test this, I think the driver can be considered
pretty much dead from an actual hardware standpoint. The hardware that
is still sold seems to be mainly USB-based, which doesn't use this
legacy driver at all.
The old floppy disk controller is still emulated in various VM
environments, so the driver isn't going away, but let's see if anybody
is interested to step up to maintain it.
The lack of hardware also likely means that the ioctl range verification
fixes are probably mostly relevant to anybody using floppies in a
virtual environment. Which is probably also going away in favor of USB
storage emulation, but who knows.
Will Decon reviewed the patches but I'm not rebasing them just for that,
so I'll add a
Reviewed-by: Will Deacon <will@kernel.org>
here instead.
* floppy:
MAINTAINERS: mark floppy.c orphaned
floppy: fix out-of-bounds read in copy_buffer
floppy: fix invalid pointer dereference in drive_name
floppy: fix out-of-bounds read in next_valid_format
floppy: fix div-by-zero in setup_format_params
I volunteered myself to maintain it quite some time ago back when I
fixed the concurrency issues which exhibited itself only with
VM-emulated devices, and at the same time I still had the physical 3.5"
reader to test all the changes.
The reader doesn't work any more though, so I guess it's time to step
down from this super-prestigious role :p and mark floppy.c as Orphaned.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Revert properties exposed in komeda that need improvement before they become ABI.
- Only add modes from the cmdline if they are valid.
- Add orientation quirk for GPD MicroPC.
- Reduce stack usage in drm selftests.
- Fix bochs framebuffer setup.
-----BEGIN PGP SIGNATURE-----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=oNyN
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2019-07-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Pull request for drm-misc-fixes-next for v5.3:
- Revert properties exposed in komeda that need improvement before they become ABI.
- Only add modes from the cmdline if they are valid.
- Add orientation quirk for GPD MicroPC.
- Reduce stack usage in drm selftests.
- Fix bochs framebuffer setup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e6b84ce4-2728-fb02-87c1-6a6b87703c0b@linux.intel.com
This adds support for the STM32 remoteproc, additional i.MX platforms
with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP. Initial
support for vendor specific resource table entries and support for
unprocessed Qualcomm firmware files.
-----BEGIN PGP SIGNATURE-----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=iqXq
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.3' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for the STM32 remoteproc, additional i.MX platforms
with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP.
Also initial support for vendor specific resource table entries and
support for unprocessed Qualcomm firmware files"
* tag 'rproc-v5.3' of git://github.com/andersson/remoteproc:
remoteproc: stm32: fix building without ARM SMCC
remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER
remoteproc: copy parent dma_pfn_offset for vdev
remoteproc: qcom: q6v5-mss: Support loading non-split images
soc: qcom: mdt_loader: Support loading non-split images
remoteproc: stm32: add an ST stm32_rproc driver
dt-bindings: remoteproc: add bindings for stm32 remote processor driver
dt-bindings: stm32: add bindings for ML-AHB interconnect
remoteproc: Use struct_size() helper
remoteproc: add vendor resources handling
remoteproc: imx: Fix typo in "failed"
remoteproc: imx: Broaden the Kconfig selection logic
remoteproc,rpmsg: add missing MAINTAINERS file entries
remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP
dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
new iommu device
vhost guest memory access using vmap (just meta-data for now)
minor fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note: due to code driver changes the driver-core tree, the following
patch is needed when merging tree with commit 92ce7e83b4
("driver_find_device: Unify the match function with
class_find_device()") in the driver-core tree:
From: Nathan Chancellor <natechancellor@gmail.com>
Subject: [PATCH] iommu/virtio: Constify data parameter in viommu_match_node
After commit 92ce7e83b4 ("driver_find_device: Unify the match
function with class_find_device()") in the driver-core tree.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
drivers/iommu/virtio-iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
index 4620dd221ffd..433f4d2ee956 100644
--- a/drivers/iommu/virtio-iommu.c
+++ b/drivers/iommu/virtio-iommu.c
@@ -839,7 +839,7 @@ static void viommu_put_resv_regions(struct device *dev, struct list_head *head)
static struct iommu_ops viommu_ops;
static struct virtio_driver virtio_iommu_drv;
-static int viommu_match_node(struct device *dev, void *data)
+static int viommu_match_node(struct device *dev, const void *data)
{
return dev->parent->fwnode == data;
}
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdJ5qUAAoJECgfDbjSjVRpQs0H/2qWcIG1zjGKyh9KWrfgOusG
/QIqeP50d7SC6oqdyd00tzmExqO1xdGLPFzYixdOsU817te1gHBP4Rfmzo01jZRd
CUzZNnZQ2JRsDshiA6G2ui+wn1/a/cB3RPN4rT1mquDYS53QmsRGDQDnpp84TXMV
aocB8TS6halbRzKMq3VmaWHIvzNXnt4dwQR542+PyeLLn9bUx2QwWj2ON3QwxixK
dVRZow3GwLGBhKTA/Z1Z/Bta4fEfOKjUGP2XWgvL6zOr+nZR4eQ8w5WXVJYzR+d6
1JCfqTxleweT2k6Tu5VwtTNlQkxn/XvQAeisppOiEE6NnPjubyI9wMQIvL7bkpo=
=uJbC
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio, vhost updates from Michael Tsirkin:
"Fixes, features, performance:
- new iommu device
- vhost guest memory access using vmap (just meta-data for now)
- minor fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-mmio: add error check for platform_get_irq
scsi: virtio_scsi: Use struct_size() helper
iommu/virtio: Add event queue
iommu/virtio: Add probe request
iommu: Add virtio-iommu driver
PCI: OF: Initialize dev->fwnode appropriately
of: Allow the iommu-map property to omit untranslated devices
dt-bindings: virtio: Add virtio-pci-iommu node
dt-bindings: virtio-mmio: Add IOMMU description
vhost: fix clang build warning
vhost: access vq metadata through kernel virtual address
vhost: factor out setting vring addr and num
vhost: introduce helpers to get the size of metadata area
vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch()
vhost: fine grain userspace memory accessors
vhost: generalize adding used elem
- Add support in dmaengine core to do device node checks for DT devices and
update bunch of drivers to use that and remove open coding from drivers
- New driver/driver support for new hardware, namely:
- MediaTek UART APDMA
- Freescale i.mx7ulp edma2
- Synopsys eDMA IP core version 0
- Allwinner H6 DMA
- Updates to axi-dma and support for interleaved cyclic transfers
- Greg's debugfs return value check removals on drivers
- Updates to stm32-dma, hsu, dw, pl330, tegra drivers
-----BEGIN PGP SIGNATURE-----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=R+aC
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
- Add support in dmaengine core to do device node checks for DT devices
and update bunch of drivers to use that and remove open coding from
drivers
- New driver/driver support for new hardware, namely:
- MediaTek UART APDMA
- Freescale i.mx7ulp edma2
- Synopsys eDMA IP core version 0
- Allwinner H6 DMA
- Updates to axi-dma and support for interleaved cyclic transfers
- Greg's debugfs return value check removals on drivers
- Updates to stm32-dma, hsu, dw, pl330, tegra drivers
* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
Documentation: dmaengine: clean up description of dmatest usage
dmaengine: tegra210-adma: remove PM_CLK dependency
dmaengine: fsl-edma: add i.mx7ulp edma2 version support
dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
dmaengine: fsl-edma-common: version check for v2 instead
dmaengine: fsl-edma-common: move dmamux register to another single function
dmaengine: fsl-edma: add drvdata for fsl-edma
dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
dmaengine: rcar-dmac: Reject zero-length slave DMA requests
dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
dmaengine: dw-edma: fix semicolon.cocci warnings
dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
dmaengine: dmatest: timeout value of -1 should specify infinite wait
dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
dmaengine: fsl-edma: support little endian for edma driver
dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
dmagengine: pl330: add code to get reset property
dt-bindings: pl330: document the optional resets property
...
- Removal of readq & writeq for MIPS32 kernels where they would simply
BUG() anyway, allowing drivers or other code that #ifdefs on their
presence to work properly.
- Improvements for Ingenic JZ4740 systems, including support for the
external memory controller & pinmuxing fixes for qi_lb60/NanoNote
systems.
- Improvements for Lantiq systems, in particular around SMP & IPIs.
- DT updates for ralink/MediaTek MT7628a systems to probe & configure a
bunch more devices.
- Miscellaneous cleanups & build fixes.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXS85dBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2yJwEA6SUzzTXdywxEy78Ala3tzghMjkD5
818q6a9DREGofyIA/ie08di/MIYS9++ETsaQemVXoe7KT333+SgTeXCb1lIJ
=RiKE
-----END PGP SIGNATURE-----
Merge tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
"A light batch this time around but significant improvements for
certain systems:
- Removal of readq & writeq for MIPS32 kernels where they would
simply BUG() anyway, allowing drivers or other code that #ifdefs on
their presence to work properly.
- Improvements for Ingenic JZ4740 systems, including support for the
external memory controller & pinmuxing fixes for qi_lb60/NanoNote
systems.
- Improvements for Lantiq systems, in particular around SMP & IPIs.
- DT updates for ralink/MediaTek MT7628a systems to probe & configure
a bunch more devices.
- Miscellaneous cleanups & build fixes"
* tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
MIPS: fix some more fall through errors in arch/mips
MIPS: perf events: handle switch statement falling through warnings
mips/kprobes: Export kprobe_fault_handler()
MAINTAINERS: Add myself as Ingenic SoCs maintainer
MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node
MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node
MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node
MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes
MIPS: ralink: mt7628a.dtsi: Add pinmux DT node
MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier
MIPS: lantiq: Add SMP support for lantiq interrupt controller
MIPS: lantiq: Shorten register names, remove unused macros
MIPS: lantiq: Fix bitfield masking
MIPS: lantiq: Remove unused macros
MIPS: lantiq: Fix attributes of of_device_id structure
MIPS: lantiq: Change variables to the same type as the source
MIPS: lantiq: Move macro directly to iomem function
mips: Remove q-accessors from non-64bit platforms
FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h
MIPS: configs: Remove useless UEVENT_HELPER_PATH
...
Some files got renamed but probably due to some merge conflicts,
a few references still point to the old locations.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Convert docs to ReST and add them to the arch-specific
book.
The conversion here was trivial, as almost every file there
was already using an elegant format close to ReST standard.
The changes were mostly to mark literal blocks and add a few
missing section title identifiers.
One note with regards to "--": on Sphinx, this can't be used
to identify a list, as it will format it badly. This can be
used, however, to identify a long hyphen - and "---" is an
even longer one.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
Alok Kataria will be handing over VMware's maintainership of these
interfaces to Thomas Hellström, with pv-drivers as backup contact.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alok Kataria <akataria@vmware.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lkml.kernel.org/r/20190328120558.29897-1-thellstrom@vmware.com
-----BEGIN PGP SIGNATURE-----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=smxY
-----END PGP SIGNATURE-----
Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull rst conversion of docs from Mauro Carvalho Chehab:
"As agreed with Jon, I'm sending this big series directly to you, c/c
him, as this series required a special care, in order to avoid
conflicts with other trees"
* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
docs: kbuild: fix build with pdf and fix some minor issues
docs: block: fix pdf output
docs: arm: fix a breakage with pdf output
docs: don't use nested tables
docs: gpio: add sysfs interface to the admin-guide
docs: locking: add it to the main index
docs: add some directories to the main documentation index
docs: add SPDX tags to new index files
docs: add a memory-devices subdir to driver-api
docs: phy: place documentation under driver-api
docs: serial: move it to the driver-api
docs: driver-api: add remaining converted dirs to it
docs: driver-api: add xilinx driver API documentation
docs: driver-api: add a series of orphaned documents
docs: admin-guide: add a series of orphaned documents
docs: cgroup-v1: add it to the admin-guide book
docs: aoe: add it to the driver-api book
docs: add some documentation dirs to the driver-api book
docs: driver-model: move it to the driver-api book
docs: lp855x-driver.rst: add it to the driver-api book
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXSxgkQAKCRCRxhvAZXjc
opJ3AP9TWIWhEC0dzbNmzh0STj/Vyl5KYEpdMbi7HNeAmIEAfQD6A3HI4bVJbN08
jH44U7DLzHJyHefKlB8jHEKEVYJWqgo=
=74Bg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd and clone3 fixes from Christian Brauner:
"This contains a bugfix for CLONE_PIDFD when used with the legacy clone
syscall, two fixes to ensure that syscall numbering and clone3
entrypoint implementations will stay consistent, and an update for the
maintainers file:
- The addition of clone3 broke CLONE_PIDFD for legacy clone on all
architectures that use do_fork() directly instead of calling the
clone syscall itself. (Fwiw, cleaning do_fork() up is on my todo.)
The reason this happened was that during conversion of _do_fork()
to use struct kernel_clone_args we missed that do_fork() is called
directly by various architectures. This is fixed by making sure
that the pidfd argument in struct kernel_clone_args is correctly
initialized with the parent_tidptr argument passed down from
do_fork(). Additionally, do_fork() missed a check to make
CLONE_PIDFD and CLONE_PARENT_SETTID mutually exclusive just a
clone() does. This is now fixed too.
- When clone3() was introduced we skipped architectures that require
special handling for fork-like syscalls. Their syscall tables did
not contain any mention of clone3().
To make sure that Arnd's work to make syscall numbers on all
architectures identical (minus alpha) was not for naught we are
placing a comment in all syscall tables that do not yet implement
clone3(). The comment makes it clear that 435 is reserved for
clone3 and should not be used.
- Also, this contains a patch to make the clone3() syscall definition
in asm-generic/unist.h conditional on __ARCH_WANT_SYS_CLONE3. This
lets us catch new architectures that implicitly make use of clone3
without setting __ARCH_WANT_SYS_CLONE3 which is a good indicator
that they did not check whether it needs special treatment or not.
- Finally, this contains a patch to add me as maintainer for pidfd
stuff so people can start blaming me (more)"
* tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
MAINTAINERS: add new entry for pidfd api
unistd: protect clone3 via __ARCH_WANT_SYS_CLONE3
arch: mark syscall number 435 reserved for clone3
clone: fix CLONE_PIDFD support
-----BEGIN PGP SIGNATURE-----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=g8xI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A later pull request with some followup items. I had some vacation
coming up to the merge window, so certain things items were delayed a
bit. This pull request also contains fixes that came in within the
last few days of the merge window, which I didn't want to push right
before sending you a pull request.
This contains:
- NVMe pull request, mostly fixes, but also a few minor items on the
feature side that were timing constrained (Christoph et al)
- Report zones fixes (Damien)
- Removal of dead code (Damien)
- Turn on cgroup psi memstall (Josef)
- block cgroup MAINTAINERS entry (Konstantin)
- Flush init fix (Josef)
- blk-throttle low iops timing fix (Konstantin)
- nbd resize fixes (Mike)
- nbd 0 blocksize crash fix (Xiubo)
- block integrity error leak fix (Wenwen)
- blk-cgroup writeback and priority inheritance fixes (Tejun)"
* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
MAINTAINERS: add entry for block io cgroup
null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
block: Limit zone array allocation size
sd_zbc: Fix report zones buffer allocation
block: Kill gfp_t argument of blkdev_report_zones()
block: Allow mapping of vmalloc-ed buffers
block/bio-integrity: fix a memory leak bug
nvme: fix NULL deref for fabrics options
nbd: add netlink reconfigure resize support
nbd: fix crash when the blksize is zero
block: Disable write plugging for zoned block devices
block: Fix elevator name declaration
block: Remove unused definitions
nvme: fix regression upon hot device removal and insertion
blk-throttle: fix zero wait time for iops throttled group
block: Fix potential overflow in blk_report_zones()
blkcg: implement REQ_CGROUP_PUNT
blkcg, writeback: Implement wbc_blkcg_css()
blkcg, writeback: Add wbc->no_cgroup_owner
blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
...
Pull i2c updates from Wolfram Sang:
"New stuff from the I2C world:
- in the core, getting irqs from ACPI is now similar to OF
- new driver for MediaTek MT7621/7628/7688 SoCs
- bcm2835, i801, and tegra drivers got some more attention
- GPIO API cleanups
- cleanups in the core headers
- lots of usual driver updates"
* 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits)
i2c: mt7621: Fix platform_no_drv_owner.cocci warnings
i2c: cpm: remove casting dma_alloc
dt-bindings: i2c: sun6i-p2wi: Fix the binding example
dt-bindings: i2c: mv64xxx: Fix the example compatible
i2c: i801: Documentation update
i2c: i801: Add support for Intel Tiger Lake
i2c: i801: Fix PCI ID sorting
dt-bindings: i2c-stm32: document optional dmas
i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support
i2c: core: Tidy up handling of init_irq
i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
i2c: core: Move ACPI IRQ handling to probe time
i2c: acpi: Factor out getting the IRQ from ACPI
i2c: acpi: Use available IRQ helper functions
i2c: core: Allow whole core to use i2c_dev_irq_from_resources
eeprom: at24: modify a comment referring to platform data
dt-bindings: i2c: omap: Add new compatible for J721E SoCs
dt-bindings: i2c: mv64xxx: Add YAML schemas
dt-bindings: i2c: sun6i-p2wi: Add YAML schemas
i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
...
A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out of the
drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl0ozSwACgkQOG33FX4g
mxqncg//Qe2zSnlbd6r3hofsc1WiHSx/CiXtT52BUGipO+cWQUwO7hGFuUHIFCuZ
JBg7mc998xkyLIH85a/txd+RwAIApKgHVdd+VlrmybZeYCiERAMFpWg8cHpzrbnw
l3Ln9fTtJf/NAhO0ZCGV9DCd01fs9yVQgAv21UnLJMUhp9Pzk/iMhu7C7IiSLKvz
t7iFhEqPXNJdoqZ+wtWyc/463YxKUd9XNg9Z1neQdaeZrX4UjgDbY9x/ub3zOvQV
jc/IL4GysJ3z8mfx5mAd6sE/jAjhcnJuaGYYATqkxiLZEP+muYwU50CNs951XhJC
b/EfRQIcLg9kq/u6CP+CuWlMrRWy3U7yj3/mrbbGhlGq88Yt6FGqUf0aFy6TYMaO
RzTG5ZR+0AmsOrR1QU+DbH9CKX5PGZko6E7UCdjROqUlAUOjNwRr99O5mYrZoM9E
PdN2vtdWY9COR3Q+7APdhWIA/MdN2vjr3LDsR3H94tru1yi6dB/BPDRcJieozaxn
2T+YrZbV+9/YgrccpPQCilaQdanXKpkmbYkbEzVLPcOEV/lT9odFDt3eK+6duVDL
ufu8fs1xapMDHKkcwo5jeNZcoSJymAvHmGfZlo2PPOmh802Ul60bvYKwfheVkhHF
Eee5/ovCMs1NLqFiq7Zq5mXO0fR0BHyg9VVjJBZm2JtazyuhoHQ=
=iWcG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out
of the drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
RMDA/siw: Require a 64 bit arch
RDMA/siw: Mark expected switch fall-throughs
RDMA/core: Fix -Wunused-const-variable warnings
rdma/siw: Remove set but not used variable 's'
rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
RDMA/siw: Add missing rtnl_lock around access to ifa
rdma/siw: Use proper enumerated type in map_cqe_status
RDMA/siw: Remove unnecessary kthread create/destroy printouts
IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
RDMA/core: Fix race when resolving IP address
RDMA/core: Make rdma_counter.h compile stand alone
IB/core: Work on the caller socket net namespace in nldev_newlink()
RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
RDMA/mlx5: Set RDMA DIM to be enabled by default
RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
RDMA/core: Provide RDMA DIM support for ULPs
linux/dim: Implement RDMA adaptive moderation (DIM)
IB/mlx5: Report correctly tag matching rendezvous capability
docs: infiniband: add it to the driver-api bookset
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
...
- Set 'struct device' fwnode when registering a new device
- New Drivers
- Add support for ROHM BD70528 PMIC
- New Device Support
- Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
- Add support for RK809 and RK817 to Rockchip RK808
- Add support for Lid Angle to ChromeOS core
- Add support for CS47L15 CODEC to Madera core
- Add support for CS47L92 CODEC to Madera core
- Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
- Add support for Add Intel Elkhart Lake PCH to Intel LPSS
- New Functionality
- Provide regulator supply information when registering; madera-core
- Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
- Allow over-riding power button press via Device Tree; rohm-bd718x7
- Differentiate between running processors; cros_ec_dev
- Fix-ups
- Big header file update; cros_ec_commands.h
- Split header per-subsystem; rohm-bd718x7
- Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
- Trivial; sorting, coding style; intel-lpss-pci
- Only remove Power Off functionality if set locally; rk808
- Make use for Power Off Prepare(); rk808
- Fix spelling mistake in header guards; stmfx
- Properly free IDA resources
- SPDX fixups; cs47lXX-tables, madera
- Error path fixups; hi655x-pmic
- Bug Fixes
- Add missing break in case() statement
- Repair undefined behaviour when not initialising variables; arizona-core, madera-core
- Fix reference to Device Tree documentation; madera
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl0sLxgACgkQUa+KL4f8
d2E25Q/9HmDJIdfyDQg0xv5IM5HS1WsP9BcJCEgoRIsad4mMDRYt+ZeLbslwMhue
E9tsFH359gGvyqR+7d6hPpEUET1UEcJy4eRD1zAc0+epllQTDHSy8oHt1dtH+8xB
2AU5rvAKOqBk83D+V2Hkx2KcroWEQQNYIoR9/12Pi3xmEB1uaCO0/Ajd3B28bIBM
Tzi3cVQ3U7jY9EIM44GVTsjDAbMSkQR0iab6cQF0vJAWaUmGKlsO7iRrU1XkN69V
qXyBauI8WGiGssihrE8r+jYvHvmg7hA9OKZIckUaMXD/k7kpHbwIaFRh7gukq4Re
Q6Cy30NfVJ1tY66/5oqN6gj5znfeuEudMCCzYAkzlROSp5eApe2Ke5ajYn3kOCZd
ZKcsrw9Fiox1lKmuWXDbyf0nqf4zwdDPAnShRWaaF5aipwgywyGcwSigVtK4F0P5
Hjc5RLv7GjTAJq+ZzwgKyAdtx8L0mhdLd1ZTQpEXk/g/E9dW4GF72hWj9TQ/9BnA
ZflKv8aP3lDGRHgO3Huwi4lMzskB8BVCQMCFwLwGs5cY1oZQhAjTdJzBZjTGexhC
evuuA8OUsCrOWMvnZf3saSdHJ1iMHtfPnqEGHRJQtNj4fFaXv80LasIomvvfJc1/
9JlRyAgm2pF7YDrgTh65ZzBb324eKSZZoAj9XZbnTyzxUAcF69A=
=A3jw
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Set 'struct device' fwnode when registering a new device
New Drivers:
- Add support for ROHM BD70528 PMIC
New Device Support:
- Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
- Add support for RK809 and RK817 to Rockchip RK808
- Add support for Lid Angle to ChromeOS core
- Add support for CS47L15 CODEC to Madera core
- Add support for CS47L92 CODEC to Madera core
- Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
- Add support for Add Intel Elkhart Lake PCH to Intel LPSS
New Functionality:
- Provide regulator supply information when registering; madera-core
- Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
- Allow over-riding power button press via Device Tree; rohm-bd718x7
- Differentiate between running processors; cros_ec_dev
Fix-ups:
- Big header file update; cros_ec_commands.h
- Split header per-subsystem; rohm-bd718x7
- Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
- Trivial; sorting, coding style; intel-lpss-pci
- Only remove Power Off functionality if set locally; rk808
- Make use for Power Off Prepare(); rk808
- Fix spelling mistake in header guards; stmfx
- Properly free IDA resources
- SPDX fixups; cs47lXX-tables, madera
- Error path fixups; hi655x-pmic
Bug Fixes:
- Add missing break in case() statement
- Repair undefined behaviour when not initialising variables; arizona-core, madera-core
- Fix reference to Device Tree documentation; madera"
* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
mfd: madera: Fixup SPDX headers
mfd: madera: Remove some unused registers and fix some defaults
mfd: intel-lpss: Release IDA resources
mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
mfd: cs5535-mfd: Remove ifdef OLPC noise
mfd: stmfx: Fix macro definition spelling
dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
mfd: rk808: Prepare rk805 for poweroff
mfd: rk808: Check pm_power_off pointer
mfd: cros_ec: differentiate SCP from EC by feature bit
dt-bindings: Add binding for cros-ec-rpmsg
mfd: madera: Add Madera core support for CS47L92
mfd: madera: Add Madera core support for CS47L15
mfd: madera: Update DT bindings to add additional CODECs
mfd: madera: Add supply mapping for MICVDD
mfd: madera: Fix potential uninitialised use of variable
mfd: madera: Fix bad reference to pinctrl.txt file
...
* 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits)
ARM: sa1100: convert to common clock framework
ARM: riscpc: enable chained scatterlist support
ARM: riscpc: reduce IRQ handling code
ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
ARM: riscpc: parse video information from tagged list
ARM: riscpc: add ecard quirk for Atomwide 3port serial card
ARM: sa1100/neponset: convert serial to use gpiod APIs
ARM: sa1100/hackkit: remove empty serial mctrl functions
ARM: sa1100/badge4: remove commented out modem control initialisers
ARM: sa1100/h3xxx: convert serial to gpiod APIs
ARM: sa1100/assabet: convert serial to gpiod APIs
serial: sa1100: add note about modem control signals
serial: sa1100: add support for mctrl gpios
ARM: riscpc: dma: use __iomem pointers for writing DMA
ARM: riscpc: dma: improve address/length writing
ARM: riscpc: dma: make state a local variable
ARM: riscpc: dma: eliminate "cur_sg" scatterlist usage
ARM: riscpc: fix DMA
ARM: riscpc: fix ecard printing
ARM: riscpc: fix lack of keyboard interrupts after irq conversion
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts commit 031e610a6a, reversing
changes made to 52d2d44eee.
The mm changes in there we premature and not fully ack or reviewed by core mm folks,
I dropped the ball by merging them via this tree, so lets take em all back out.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move xfs.txt to admin-guide, convert xfs.txt to ReST and broken references
Signed-off-by: Sheriff Esseson <sheriffesseson@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create the build infrastructure we need to start migrating iomap code to
fs/iomap/ from fs/iomap.c.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While this is stated as obsoleted, the sysfs interface described
there is still valid, and belongs to the admin-guide.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
There are lots of documents under Documentation/*.txt and a few other
orphan documents elsehwere that belong to the driver-API book.
Move them to their right place.
Reviewed-by: Cornelia Huck <cohuck@redhat.com> # vfio-related parts
Acked-by: Logan Gunthorpe <logang@deltatee.com> # switchtec
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are lots of documents that belong to the admin-guide but
are on random places (most under Documentation root dir).
Move them to the admin guide.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Those files belong to the admin guide, so add them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Justin Sanders <justin@coraid.com>
The content of this file is user-faced.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Those two docs belong to the x86 architecture:
Documentation/Intel-IOMMU.txt -> Documentation/x86/intel-iommu.rst
Documentation/intel_txt.txt -> Documentation/x86/intel_txt.rst
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
