Kuogee Hsieh
8b2c181e3d
drm/msm/dp: add fail safe mode outside of event_mutex context
...
There is possible circular locking dependency detected on event_mutex
(see below logs). This is due to set fail safe mode is done at
dp_panel_read_sink_caps() within event_mutex scope. To break this
possible circular locking, this patch move setting fail safe mode
out of event_mutex scope.
[ 23.958078] ======================================================
[ 23.964430] WARNING: possible circular locking dependency detected
[ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1f69e #148 Not tainted
[ 23.977219] ------------------------------------------------------
[ 23.983570] DrmThread/1574 is trying to acquire lock:
[ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164
[ 23.997895]
[ 23.997895] but task is already holding lock:
[ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c
[ 24.012495]
[ 24.012495] which lock already depends on the new lock.
[ 24.012495]
[ 24.020886]
[ 24.020886] the existing dependency chain (in reverse order) is:
[ 24.028570]
[ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}:
[ 24.035472] __mutex_lock+0xc8/0x384
[ 24.039695] mutex_lock_nested+0x54/0x74
[ 24.044272] lock_crtcs+0x80/0x8c
[ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.053413] commit_tail+0x7c/0xfc
[ 24.057452] drm_atomic_helper_commit+0x158/0x15c
[ 24.062826] drm_atomic_commit+0x60/0x74
[ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.072508] drm_ioctl_kernel+0xe8/0x168
[ 24.077086] drm_ioctl+0x320/0x370
[ 24.081123] drm_compat_ioctl+0x40/0xdc
[ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.090895] invoke_syscall+0x80/0x114
[ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.100668] do_el0_svc_compat+0x2c/0x54
[ 24.105242] el0_svc_compat+0x4c/0xe4
[ 24.109548] el0t_32_sync_handler+0xc4/0xf4
[ 24.114381] el0t_32_sync+0x178
[ 24.118688]
[ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}:
[ 24.125408] __mutex_lock+0xc8/0x384
[ 24.129628] mutex_lock_nested+0x54/0x74
[ 24.134204] lock_crtcs+0x80/0x8c
[ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.143345] commit_tail+0x7c/0xfc
[ 24.147382] drm_atomic_helper_commit+0x158/0x15c
[ 24.152755] drm_atomic_commit+0x60/0x74
[ 24.157323] drm_atomic_helper_set_config+0x68/0x90
[ 24.162869] drm_mode_setcrtc+0x394/0x648
[ 24.167535] drm_ioctl_kernel+0xe8/0x168
[ 24.172102] drm_ioctl+0x320/0x370
[ 24.176135] drm_compat_ioctl+0x40/0xdc
[ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.185904] invoke_syscall+0x80/0x114
[ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.195673] do_el0_svc_compat+0x2c/0x54
[ 24.200241] el0_svc_compat+0x4c/0xe4
[ 24.204544] el0t_32_sync_handler+0xc4/0xf4
[ 24.209378] el0t_32_sync+0x174/0x178
[ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}:
[ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878
[ 24.225951] ww_mutex_lock+0x60/0xd0
[ 24.230166] modeset_lock+0x190/0x19c
[ 24.234467] drm_modeset_lock+0x34/0x54
[ 24.238953] drmm_mode_config_init+0x550/0x764
[ 24.244065] msm_drm_bind+0x170/0x59c
[ 24.248374] try_to_bring_up_master+0x244/0x294
[ 24.253572] __component_add+0xf4/0x14c
[ 24.258057] component_add+0x2c/0x38
[ 24.262273] dsi_dev_attach+0x2c/0x38
[ 24.266575] dsi_host_attach+0xc4/0x120
[ 24.271060] mipi_dsi_attach+0x34/0x48
[ 24.275456] devm_mipi_dsi_attach+0x28/0x68
[ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc
[ 24.285137] auxiliary_bus_probe+0x78/0x90
[ 24.289893] really_probe+0x1e4/0x3d8
[ 24.294194] __driver_probe_device+0x14c/0x164
[ 24.299298] driver_probe_device+0x54/0xf8
[ 24.304043] __device_attach_driver+0xb4/0x118
[ 24.309145] bus_for_each_drv+0xb0/0xd4
[ 24.313628] __device_attach+0xcc/0x158
[ 24.318112] device_initial_probe+0x24/0x30
[ 24.322954] bus_probe_device+0x38/0x9c
[ 24.327439] deferred_probe_work_func+0xd4/0xf0
[ 24.332628] process_one_work+0x2f0/0x498
[ 24.337289] process_scheduled_works+0x44/0x48
[ 24.342391] worker_thread+0x1e4/0x26c
[ 24.346788] kthread+0xe4/0xf4
[ 24.350470] ret_from_fork+0x10/0x20
[ 24.354683]
[ 24.354683]
[ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}:
[ 24.361489] drm_modeset_acquire_init+0xe4/0x138
[ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114
[ 24.372327] check_connector_changed+0xbc/0x198
[ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c
[ 24.382804] dsi_hpd_worker+0x24/0x30
[ 24.387104] process_one_work+0x2f0/0x498
[ 24.391762] worker_thread+0x1d0/0x26c
[ 24.396158] kthread+0xe4/0xf4
[ 24.399840] ret_from_fork+0x10/0x20
[ 24.404053]
[ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}:
[ 24.411032] __mutex_lock+0xc8/0x384
[ 24.415247] mutex_lock_nested+0x54/0x74
[ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c
[ 24.425108] dp_display_process_hpd_high+0x34/0xd4
[ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c
[ 24.436205] hpd_event_thread+0x2ac/0x550
[ 24.440864] kthread+0xe4/0xf4
[ 24.444544] ret_from_fork+0x10/0x20
[ 24.448757]
[ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}:
[ 24.455116] __lock_acquire+0xe2c/0x10d8
[ 24.459690] lock_acquire+0x1ac/0x2d0
[ 24.463988] __mutex_lock+0xc8/0x384
[ 24.468201] mutex_lock_nested+0x54/0x74
[ 24.472773] msm_dp_display_enable+0x58/0x164
[ 24.477789] dp_bridge_enable+0x24/0x30
[ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c
[ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244
[ 24.494801] msm_atomic_commit_tail+0x248/0x3d0
[ 24.499992] commit_tail+0x7c/0xfc
[ 24.504031] drm_atomic_helper_commit+0x158/0x15c
[ 24.509404] drm_atomic_commit+0x60/0x74
[ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.519079] drm_ioctl_kernel+0xe8/0x168
[ 24.523650] drm_ioctl+0x320/0x370
[ 24.527689] drm_compat_ioctl+0x40/0xdc
[ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.537463] invoke_syscall+0x80/0x114
[ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.547235] do_el0_svc_compat+0x2c/0x54
[ 24.551806] el0_svc_compat+0x4c/0xe4
[ 24.556106] el0t_32_sync_handler+0xc4/0xf4
[ 24.560948] el0t_32_sync+0x174/0x178
Changes in v2:
-- add circular lockiing trace
Fixes: d4aca42253 ("drm/msm/dp: always add fail-safe mode into connector mode list")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com >
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
Patchwork: https://patchwork.freedesktop.org/patch/481396/
Link: https://lore.kernel.org/r/1649451894-554-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2022-04-11 09:36:13 -07:00
Kuogee Hsieh
d4aca42253
drm/msm/dp: always add fail-safe mode into connector mode list
...
Some of DP link compliant test expects to return fail-safe mode
if prefer detailed timing mode can not be supported by mainlink's
lane and rate after link training. Therefore add fail-safe mode
into connector mode list as backup mode. This patch fixes test
case 4.2.2.1.
Changes in v2:
-- add Fixes text string
Fixes: 4b85d405cf ( "drm/msm/dp: reduce link rate if failed at link training 1")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com >
Reviewed-by: Stephen Boyd <swboyd@chromium.org >
Link: https://lore.kernel.org/r/1643066274-25814-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
2022-02-18 18:32:58 +03:00
Colin Ian King
76544e4bb1
drm/msm/dp: Remove redundant initialization of variable bpp
...
The variable bpp is being initialized with a value that is never
read, it is being updated later on in both paths of an if statement.
The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com >
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
Link: https://lore.kernel.org/r/20210929105458.209895-1-colin.king@canonical.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2021-10-15 13:26:33 -07:00
Kuogee Hsieh
7948fe12d4
drm/msm/dp: return correct edid checksum after corrupted edid checksum read
...
Response with correct edid checksum saved at connector after corrupted edid
checksum read. This fixes Link Layer CTS cases 4.2.2.3, 4.2.2.6.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org >
Reviewed-by: Stephen Boyd <swboyd@chromium.org >
Link: https://lore.kernel.org/r/1628196295-7382-6-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org >
2021-08-10 14:49:29 -07:00
zuoqilin
48c305808d
drm/msm: Remove unneeded variable: "rc"
...
Remove unneeded variable: "rc".
Signed-off-by: zuoqilin <zuoqilin@yulong.com >
Link: https://lore.kernel.org/r/20210318032422.1285-1-zuoqilin1@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2021-06-23 07:33:53 -07:00
Stephen Boyd
e45b40ab9b
drm/msm/dp: Drop malformed debug print
...
This print is missing a newline, and doesn't really provide any value.
Drop it.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
Cc: Abhinav Kumar <abhinavk@codeaurora.org >
Cc: Kuogee Hsieh <khsieh@codeaurora.org >
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run >
Signed-off-by: Stephen Boyd <swboyd@chromium.org >
Link: https://lore.kernel.org/r/20210430193104.1770538-4-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org >
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2021-06-23 07:32:15 -07:00
Bernard Zhao
5ca6d0268d
drm/msm: remove unneeded variable: "rc"
...
remove unneeded variable: "rc".
Signed-off-by: Bernard Zhao <bernard@vivo.com >
Reviewed-by: Guenter Roeck <groeck@chromium.org >
Reviewed-by: Stephen Boyd <swboyd@chromium.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2021-02-04 13:40:48 -08:00
Kuogee Hsieh
2b5f09cadf
drm/msm/dp: postpone irq_hpd event during connection pending state
...
irq_hpd event can only be executed at connected state. Therefore
irq_hpd event should be postponed if it happened at connection
pending state. This patch also make sure both link rate and lane
are valid before start link training.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2021-01-07 09:11:02 -08:00
Kuogee Hsieh
231a04fcc6
drm/msm/dp: deinitialize mainlink if link training failed
...
DP compo phy have to be enable to start link training. When
link training failed phy need to be disabled so that next
link traning can be proceed smoothly at next plug in. This
patch de-initialize mainlink to disable phy if link training
failed. This prevent system crash due to
disp_cc_mdss_dp_link_intf_clk stuck at "off" state. This patch
also perform checking power_on flag at dp_display_enable() and
dp_display_disable() to avoid crashing when unplug cable while
display is off.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2020-11-10 12:39:31 -08:00
Kuogee Hsieh
62671d2ef2
drm/msm/dp: fixes wrong connection state caused by failure of link train
...
Connection state is not set correctly happen when either failure of link
train due to cable unplugged in the middle of aux channel reading or
cable plugged in while in suspended state. This patch fixes these problems.
This patch also replace ST_SUSPEND_PENDING with ST_DISPLAY_OFF.
Changes in V2:
-- Add more information to commit message.
Changes in V3:
-- change base
Changes in V4:
-- add Fixes tag
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2020-11-10 12:39:15 -08:00
Stephen Boyd
937f941ca0
drm/msm/dp: Use qmp phy for DP PLL and PHY
...
Make the necessary changes to the DP driver to use the qmp phy from the
common phy framework instead of rolling our own in the drm subsystem.
This also removes the PLL code and adds proper includes so things build.
Cc: Jeykumar Sankaran <jsanka@codeaurora.org >
Cc: Chandan Uddaraju <chandanu@codeaurora.org >
Cc: Vara Reddy <varar@codeaurora.org >
Cc: Tanmay Shah <tanmay@codeaurora.org >
Cc: Bjorn Andersson <bjorn.andersson@linaro.org >
Cc: Manu Gautam <mgautam@codeaurora.org >
Cc: Sandeep Maheswaram <sanm@codeaurora.org >
Cc: Douglas Anderson <dianders@chromium.org >
Cc: Sean Paul <seanpaul@chromium.org >
Cc: Jonathan Marek <jonathan@marek.ca >
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
Cc: Rob Clark <robdclark@chromium.org >
Signed-off-by: Stephen Boyd <swboyd@chromium.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2020-09-15 10:54:35 -07:00
Abhinav Kumar
ab20592759
drm/msm/dp: remove mode hard-coding in case of DP CTS
...
No need to fix the number of resolutions to one during the video
pattern CTS test. The userspace test client will handle both
the hotplug as well as picking the right resolution for the test.
Changes in v2: rebase on top of latest patchset of dependency
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2020-09-15 10:54:35 -07:00
Kuogee Hsieh
8ede2ecc3e
drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets
...
add event thread to execute events serially from event queue. Also
timeout mode is supported which allow an event be deferred to be
executed at later time. Both link and phy compliant tests had been
done successfully.
Changes in v2:
-- Fix potential deadlock by removing redundant connect_mutex
-- Check and enable link clock during modeset
-- Drop unused code and fix function prototypes.
-- set sink power to normal operation state (D0) before DPCD read
Changes in v3:
-- push idle pattern at main link before timing generator off
-- add timeout handles for both connect and disconnect
Changes in v4:
-- add ST_SUSPEND_PENDING to handles suspend/modeset test operations
-- clear dp phy aux interrupt status when ERR_DPPHY_AUX error
-- send segment addr during edid read
-- clear bpp depth before MISC register write
Changes in v5:
-- add ST_SUSPENDED to fix crash at resume
Changes in v6:
-- at msm_dp_display_enable() do not return until resume_done to avoid
kms commit timeout
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2020-09-15 10:54:34 -07:00
Chandan Uddaraju
c943b4948b
drm/msm/dp: add displayPort driver support
...
Add the needed displayPort files to enable DP driver
on msm target.
"dp_display" module is the main module that calls into
other sub-modules. "dp_drm" file represents the interface
between DRM framework and DP driver.
Changes in v12:
-- Add support of pm ops in display port driver
-- Clear bpp depth bits before writing to MISC register
-- Fix edid read
Previous Change log:
https://lkml.kernel.org/lkml/20200818051137.21478-3-tanmay@codeaurora.org/
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org >
Signed-off-by: Vara Reddy <varar@codeaurora.org >
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org >
Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org >
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org >
Co-developed-by: Kuogee Hsieh <khsieh@codeaurora.org >
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org >
Co-developed-by: Guenter Roeck <groeck@chromium.org >
Signed-off-by: Guenter Roeck <groeck@chromium.org >
Co-developed-by: Stephen Boyd <swboyd@chromium.org >
Signed-off-by: Stephen Boyd <swboyd@chromium.org >
Signed-off-by: Rob Clark <robdclark@chromium.org >
2020-09-15 10:54:34 -07:00