The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable is only used once, so just open code the bio_sector()
there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All registers disks must have a valid queue pointer, so don't bother to
log a warning for that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "generic_make_request: " prefix has no value, and will soon become
stale.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queue can be trivially derived from the bio, so pass one less
argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use rq directly, the usage of list_entry_rq() doesn't make any
sense.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a statement that is indented one level too deeply, fix it
by removing a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move .nr_active update and request assignment into blk_mq_get_driver_tag(),
all are good to do during getting driver tag.
Meantime blk-flush related code is simplified and flush request needn't
to update the request table manually any more.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is used by blk-mq.c only, so move it to the source file.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_get_driver_tag() is only used by blk-mq.c and is supposed to
stay in blk-mq.c, so move it and preparing for cleanup code of
get/put driver tag.
Meantime hctx_may_queue() is moved to header file and it is fine
since it is defined as inline always.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
More and more drivers want to get batching requests queued from
block layer, such as mmc, and tcp based storage drivers. Also
current in-tree users have virtio-scsi, virtio-blk and nvme.
For none, we already support batching dispatch.
But for io scheduler, every time we just take one request from scheduler
and pass the single request to blk_mq_dispatch_rq_list(). This way makes
batching dispatch not possible when io scheduler is applied. One reason
is that we don't want to hurt sequential IO performance, becasue IO
merge chance is reduced if more requests are dequeued from scheduler
queue.
Try to support batching dispatch for io scheduler by starting with the
following simple approach:
1) still make sure we can get budget before dequeueing request
2) use hctx->dispatch_busy to evaluate if queue is busy, if it is busy
we fackback to non-batching dispatch, otherwise dequeue as many as
possible requests from scheduler, and pass them to blk_mq_dispatch_rq_list().
Wrt. 2), we use similar policy for none, and turns out that SCSI SSD
performance got improved much.
In future, maybe we can develop more intelligent algorithem for batching
dispatch.
Baolin has tested this patch and found that MMC performance is improved[3].
[1] https://lore.kernel.org/linux-block/20200512075501.GF1531898@T590/#r
[2] https://lore.kernel.org/linux-block/fe6bd8b9-6ed9-b225-f80c-314746133722@grimberg.me/
[3] https://lore.kernel.org/linux-block/CADBw62o9eTQDJ9RvNgEqSpXmg6Xcq=2TxH0Hfxhp29uF2W=TXA@mail.gmail.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass obtained budget count to blk_mq_dispatch_rq_list(), and prepare
for supporting fully batching submission.
With the obtained budget count, it is easier to put extra budgets
in case of .queue_rq failure.
Meantime remove the old 'got_budget' parameter.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE is returned from
.queue_rq, the 'list' variable always holds this rq which isn't
queued to LLD successfully.
So blk_mq_dispatch_rq_list() always returns false from the branch
of '!list_empty(list)'.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move code for getting driver tag and budget into one helper, so
blk_mq_dispatch_rq_list gets a bit simplified, and easier to read.
Meantime move updating of 'no_tag' and 'no_budget_available' into
the branch for handling partial dispatch because that is exactly
consumer of the two local variables.
Also rename the parameter of 'got_budget' as 'ask_budget'.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All requests in the 'list' of blk_mq_dispatch_rq_list belong to same
hctx, so it is better to pass hctx instead of request queue, because
blk-mq's dispatch target is hctx instead of request queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-mq budget is abstract from scsi's device queue depth, and it is
always per-request-queue instead of hctx.
It can be quite absurd to get a budget from one hctx, then dequeue a
request from scheduler queue, and this request may not belong to this
hctx, at least for bfq and deadline.
So fix the mess and always pass request queue to get/put budget
callback.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just check for a non-NULL elevator directly to make the code more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is natural to release driver tag when this request is completed by
LLD or device since its purpose is for LLD use.
One big benefit is that the released tag can be re-used quicker since
bio_endio() may take too long.
Meantime we don't need to release driver tag for flush request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bios must have a valid block group by the time they are submitted.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg_bio_issue_check is a giant inline function that does three entirely
different things. Factor out the blk-cgroup related bio initalization
into a new helper, and the open code the sequence in the only caller,
relying on the fact that all the actual functionality is stubbed out for
non-cgroup builds.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only thing in blkcg_bio_issue_check that needs to be under
rcu_read_lock is blk_throtl_bio, so move the locking there.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By moving the initial blkg lookup into blkg_tryget_closest we get
a nicely self contained routines that does all the RCU locking.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The root_blkg is only torn down at the very end of removing a queue.
So in the I/O submission path is always has a life reference and we
can just grab another one using blkg_get instead of doing a tryget
and parent walk that won't lead anywhere.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No good reason to keep these two functions split.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_associate_blkg_from_page is a special purpose helper for swap bios
that doesn't need access to bio internals. Move it to the swap code
instead of having it in bio.c.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge __bio_associate_blkg into the only caller, which allows to slightly
reduce the RCU crticial section and better explain the code flow.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_clone_blkg_association is supposed to clone the associatation, but
actually ends up doing a search with a tryget. As we know we have a
reference on the source cgroup just get an unconditional additional
reference to it and call it a day. That also removes the need for
a RCU critical section.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_disassociate_blkg has two callers, of which one immediately assigns
a new value to >bi_blkg. Just open code the function in the two callers.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is no need do finish_wait twice after acquiring inflight.
Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently blk-mq does not report any event when two requests get merged
in the elevator. This then results in difficult to understand sequence
of events like:
...
8,0 34 1579 0.608765271 2718 I WS 215023504 + 40 [dbench]
8,0 34 1584 0.609184613 2719 A WS 215023544 + 56 <- (8,4) 2160568
8,0 34 1585 0.609184850 2719 Q WS 215023544 + 56 [dbench]
8,0 34 1586 0.609188524 2719 G WS 215023544 + 56 [dbench]
8,0 3 602 0.609684162 773 D WS 215023504 + 96 [kworker/3:1H]
8,0 34 1591 0.609843593 0 C WS 215023504 + 96 [0]
and you can only guess (after quite some headscratching since the above
excerpt is intermixed with a lot of other IO) that request 215023544+56
got merged to request 215023504+40. Provide proper event for request
merging like we used to do in the legacy block layer.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We were only creating the request_queue debugfs_dir only
for make_request block drivers (multiqueue), but never for
request-based block drivers. We did this as we were only
creating non-blktrace additional debugfs files on that directory
for make_request drivers. However, since blktrace *always* creates
that directory anyway, we special-case the use of that directory
on blktrace. Other than this being an eye-sore, this exposes
request-based block drivers to the same debugfs fragile
race that used to exist with make_request block drivers
where if we start adding files onto that directory we can later
run a race with a double removal of dentries on the directory
if we don't deal with this carefully on blktrace.
Instead, just simplify things by always creating the request_queue
debugfs_dir on request_queue registration. Rename the mutex also to
reflect the fact that this is used outside of the blktrace context.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit dc9edc44de ("block: Fix a blk_exit_rl() regression") merged on
v4.12 moved the work behind blk_release_queue() into a workqueue after a
splat floated around which indicated some work on blk_release_queue()
could sleep in blk_exit_rl(). This splat would be possible when a driver
called blk_put_queue() or blk_cleanup_queue() (which calls blk_put_queue()
as its final call) from an atomic context.
blk_put_queue() decrements the refcount for the request_queue kobject, and
upon reaching 0 blk_release_queue() is called. Although blk_exit_rl() is
now removed through commit db6d995235 ("block: remove request_list code")
on v5.0, we reserve the right to be able to sleep within
blk_release_queue() context.
The last reference for the request_queue must not be called from atomic
context. *When* the last reference to the request_queue reaches 0 varies,
and so let's take the opportunity to document when that is expected to
happen and also document the context of the related calls as best as
possible so we can avoid future issues, and with the hopes that the
synchronous request_queue removal sticks.
We revert back to synchronous request_queue removal because asynchronous
removal creates a regression with expected userspace interaction with
several drivers. An example is when removing the loopback driver, one
uses ioctls from userspace to do so, but upon return and if successful,
one expects the device to be removed. Likewise if one races to add another
device the new one may not be added as it is still being removed. This was
expected behavior before and it now fails as the device is still present
and busy still. Moving to asynchronous request_queue removal could have
broken many scripts which relied on the removal to have been completed if
there was no error. Document this expectation as well so that this
doesn't regress userspace again.
Using asynchronous request_queue removal however has helped us find
other bugs. In the future we can test what could break with this
arrangement by enabling CONFIG_DEBUG_KOBJECT_RELEASE.
While at it, update the docs with the context expectations for the
request_queue / gendisk refcount decrement, and make these
expectations explicit by using might_sleep().
Fixes: dc9edc44de ("block: Fix a blk_exit_rl() regression")
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let us clarify the context under which the helpers to increment the
refcount for the gendisk and request_queue can be called under. We
make this explicit on the places where we may sleep with might_sleep().
We don't address the decrement context yet, as that needs some extra
work and fixes, but will be addressed in the next patch.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds documentation for the gendisk / request_queue refcount
helpers.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a variant of blk_mq_complete_request_remote that only completes
the request if it needs to be bounced to another CPU or a softirq. If
the request can be completed locally the function returns false and lets
the driver complete it without requring and indirect function call.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to decide if we can complete locally or need an IPI.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't really care if we get migrated during the I/O completion.
In the worth case we either perform an IPI that wasn't required, or
complete the request on a CPU which we just migrated off.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both the softirq path for single queue devices and the multi-queue
completion handler share the same logic to figure out if we need an
IPI for the completion and eventually issue it. Merge the two
versions into a single unified code path.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let the compile optimize out the entire IPI path, given that we are
obviously not going to use it.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even for single queue devices there is no point in offloading a polled
completion to the softirq, given that blk_mq_force_complete_rq is called
from the polling thread in that case and thus there are no starvation
issues.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By open coding raise_blk_irq in the only caller, and replacing the
ifdef CONFIG_SMP with an IS_ENABLED check the flow in the caller
can be significantly simplified.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to deduplicate the logic that raises the block softirq.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blk_complete_request is only called from the blk-mq code, and
duplicates a lot of code from blk-mq.c. Move it there to prepare
for better code sharing and simplifications.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=LeLd
-----END PGP SIGNATURE-----
Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Use import_uuid() where appropriate (Andy)
- bcache fixes (Coly, Mauricio, Zhiqiang)
- blktrace sparse warnings fix (Jan)
- blktrace concurrent setup fix (Luis)
- blkdev_get use-after-free fix (Jason)
- Ensure all blk-mq maps are updated (Weiping)
- Loop invalidate bdev fix (Zheng)
* tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block:
block: make function 'kill_bdev' static
loop: replace kill_bdev with invalidate_bdev
partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense
block: update hctx map when use multiple maps
blktrace: Avoid sparse warnings when assigning q->blk_trace
blktrace: break out of blktrace setup on concurrent calls
block: Fix use-after-free in blkdev_get()
trace/events/block.h: drop kernel-doc for dropped function parameter
blk-mq: Remove redundant 'return' statement
bcache: pr_info() format clean up in bcache_device_init()
bcache: use delayed kworker fo asynchronous devices registration
bcache: check and adjust logical block size for backing devices
bcache: fix potential deadlock problem in btree_gc_coalesce
There is a specific API to treat raw data as UUID, i.e. import_uuid().
Use it instead of uuid_copy() with explicit casting.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is an issue when tune the number for read and write queues,
if the total queue count was not changed. The hctx->type cannot
be updated, since __blk_mq_update_nr_hw_queues will return directly
if the total queue count has not been changed.
Reproduce:
dmesg | grep "default/read/poll"
[ 2.607459] nvme nvme0: 48/0/0 default/read/poll queues
cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c
48 default
tune the write queues to 24:
echo 24 > /sys/module/nvme/parameters/write_queues
echo 1 > /sys/block/nvme0n1/device/reset_controller
dmesg | grep "default/read/poll"
[ 433.547235] nvme nvme0: 24/24/0 default/read/poll queues
cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c
48 default
The driver's hardware queue mapping is not same as block layer.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
