Starting from GM204, certain registers are no longer accessible by the host
(or unsigned PMU firmware).
This commit implements devinit on PMU, using a signed microcode image, and
devinit data, from the VBIOS.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We're about to need to be able to fetch additional chunks of data beyond
the primary bios image, which makes fetching a lot more complicated.
This splits out the verious shadowing routines to be nothing more than
very dumb "fetch this much data from this offset" routines, and leaves
the logic of what and how much to fetch in common code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nv92 hardware has only 16 interrupt lines, while nv94 and later
has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect
PDISP setup. This is a regression introduced with
commit 9d0f5ec9ee0fd5dc5fc1cc2cf559286431e406e3
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Mon May 12 15:22:42 2014 +1000
gpio: split g92 class from nv50
Reported-by: estece on #nouveau
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We will use this subdev to disable temperature reading on cards that did not
get a sensor calibration in the factory.
v2:
- rename "nouveau_fuse_rd32" to "gxXXX_fuse_rd32" as adviced by Christian Costa
- fold the code a little as adviced by Emil Velikov
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
v2: change the copyright ownership from "Nouveau Community" to myself, as per
Illia's recommendation.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Re-use the therm-exported fan structure with only two minor modifications:
- pwm_freq: u16 -> u32;
- add fan_type (toggle or PWM)
v2:
- Do not memset the table to 0 as it erases the pre-set default values
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is a wrapper around the interfaces defined in an earlier commit,
and is also used by various userspace (either by a libdrm backend, or
libpciaccess) tools/tests.
In the future this will be extended to handle channels, replacing some
long-unloved code we currently use, and allow fifo/display/mpeg (hi
Ilia ;)) engines to all be exposed in the same way.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This forms the basis for the new APIs that will be exposed to userspace,
giving it access to:
- Object method calls, the immediately useful of which is performance
counters and the abiity to manipulate the ZBC tables.
- Information on the child classes an object supports, in order to avoid
having to try all supported classes until successful.
- Notifications, which will be used in the future to inform the client
if its channel was killed due to a lockup, etc.
This commit imports the interfaces, but are not currently used. The DRM
portion of the driver will be ported to speak to the core using these
interfaces as much as possible.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is a lot of prep-work for being able to send event notifications
back to userspace. Events now contain data, rather than a "something
just happened" signal.
Handler data is now embedded into a containing structure, rather than
being kmalloc()'d, and can optionally have the notify routine handled
in a workqueue.
Various races between suspend/unload with display HPD/DP IRQ handlers
automagically solved as a result.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add support for reclocking on GK20A, using a statically-defined pstates
table. The algorithms for calculating the coefficients and setting the
clocks are directly taken from the ChromeOS kernel.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GK20A's BAR is functionally identical to NVC0's, but do not support
being ioremapped write-combined. Create a BAR instance for GK20A that
reflect that state.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Add a platform driver for Nouveau devices declared using the device tree
or platform data. This driver currently supports GK20A on Tegra
platforms and is only compiled for these platforms if Nouveau is
enabled.
Nouveau will probe the chip type itself using the BOOT0 register, so all
this driver really needs to do is to make sure the module is powered and
its clocks active before calling nouveau_drm_platform_probe().
Heavily based on work done by Thierry Reding.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As a side note.. It's a bit hard to figure out how to name this commit..
GK20A is NVEA, which is before NV108 (GK208).. Confusing.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As documented at:
ftp://download.nvidia.com/open-gpu-doc/gk104-disable-graphics-power-gating/1/gk104-disable-graphics-power-gating.txt
NVIDIA were not able document the steps necessary to detect whether this
is required or not at this time. However, they did confirm that this
procedure is safe to perform unconditionally on GK104/6. GK107 does not
have the power gating feature, and it was recommended that we do not
perform these steps there as the effects were not verified.
The disable path is from observing the binary driver, and not
documented in the link above.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will, at some point, be used to replace various bits and pieces of
code doing direct bios parsing. For now, it'll just be used for some
DP improvements.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There's also provisions to allow a pad to be locked with a specific
routing, for an indefinite period of time. This will be used in
future patches.
The G94+ pad driver will now also power-down pads when not required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add a GR device for GK20A based on NVE4, with the correct classes
definitions (GK20A's 3D class is 0xa297).
Most of the NVE4 code can be used on GK20A, so make relevant bits of
NVE4 available to other chips as well.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GK20A's FIFO is compatible with NVE0, but only features 128 channels and
1 runlist.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add a simple FB device for GK20A, as well as a RAM implementation
suitable for chips that use system memory as video RAM.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add support for initializing the priv ring of GK20A. This is done by the
BIOS on desktop GPUs, but needs to be done by hand on Tegra.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
See https://bugs.freedesktop.org/show_bug.cgi?id=74492
Reported-by: Ronald <ronald645@gmail.com>
Suggested-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
