as you are already in a tasklet, it is unnecessary to call
spin_lock_bh, because softirq already disable BH.
Signed-off-by: Zhiwei Jiang <qq282012236@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Recently syzkaller was able to create unkillablle processes by
creating a timer that is delivered as a thread local signal on SIGHUP,
and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing
to deliver SIGHUP but always trying.
When the stack overflows delivery of SIGHUP fails and force_sigsegv is
called. Unfortunately because SIGSEGV is numerically higher than
SIGHUP next_signal tries again to deliver a SIGHUP.
From a quality of implementation standpoint attempting to deliver the
timer SIGHUP signal is wrong. We should attempt to deliver the
synchronous SIGSEGV signal we just forced.
We can make that happening in a fairly straight forward manner by
instead of just looking at the signal number we also look at the
si_code. In particular for exceptions (aka synchronous signals) the
si_code is always greater than 0.
That still has the potential to pick up a number of asynchronous
signals as in a few cases the same si_codes that are used
for synchronous signals are also used for asynchronous signals,
and SI_KERNEL is also included in the list of possible si_codes.
Still the heuristic is much better and timer signals are definitely
excluded. Which is enough to prevent all known ways for someone
sending a process signals fast enough to cause unexpected and
arguably incorrect behavior.
Cc: stable@vger.kernel.org
Fixes: a27341cd5f ("Prioritize synchronous signals over 'normal' signals")
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Recently syzkaller was able to create unkillablle processes by
creating a timer that is delivered as a thread local signal on SIGHUP,
and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop
failing to deliver SIGHUP but always trying.
Upon examination it turns out part of the problem is actually most of
the solution. Since 2.5 signal delivery has found all fatal signals,
marked the signal group for death, and queued SIGKILL in every threads
thread queue relying on signal->group_exit_code to preserve the
information of which was the actual fatal signal.
The conversion of all fatal signals to SIGKILL results in the
synchronous signal heuristic in next_signal kicking in and preferring
SIGHUP to SIGKILL. Which is especially problematic as all
fatal signals have already been transformed into SIGKILL.
Instead of dequeueing signals and depending upon SIGKILL to
be the first signal dequeued, first test if the signal group
has already been marked for death. This guarantees that
nothing in the signal queue can prevent a process that needs
to exit from exiting.
Cc: stable@vger.kernel.org
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When calling debugfs functions, they can now return error values if
something went wrong. If that happens, return a NULL as a *dentry to
the relay core instead of passing it an illegal pointer.
The relay core should be able to handle an illegal pointer, but add this
check to be safe.
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Firmware sends the tx_duration for each in HTT_T2H_MSG_TYPE_PEER_STATS
msg. Fill the tx_duration sent by firmware in the tx stats information
per STA.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1,
WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The firmware advertises the LDPC support information for HT in
HT capability info in the wmi service ready event. To provide
granularity, firmware now advertises WMI_HT_CAP_RX_LDPC and
WMI_HT_CAP_TX_LDPC separately. To support LDPC, host should
also check for WMI_HT_CAP_RX_LDPC and WMI_HT_CAP_TX_LDPC in HT
capabilities.
Add a condition to existing logic in host to know whether firmware
supports LDPC or not.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1,
WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Reduce the transmit MSDU count for SDIO, to match with the descriptors
as used by the firmware. This also acts as a high watermark level for
transmit. Too many packets to the firmware results in transmit overflow
interrupt.
It only affect SDIO chip, it will not cause functionaly changes to
other hardware.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00005-QCARMSWP-1.
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When calling debugfs functions, they can now return error values if
something went wrong. If that happens, return a NULL as a *dentry to
the relay core instead of passing it an illegal pointer.
The relay core should be able to handle an illegal pointer, but add this
check to be safe.
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/ath/ath10k/snoc.c: In function 'ath10k_snoc_tx_pipe_cleanup':
drivers/net/wireless/ath/ath10k/snoc.c:681:22: warning:
variable 'ar_snoc' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
sdio_register_driver() doesn't do this for us, unlike (for example)
platform_driver_register(). This is important for helping track
module-to-device relationships.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The swap box flag of firmware is not set before htc ready, then it
will not set swap box flag in ath10k driver, and it will let swap
box setting not same between firmware and ath10k driver, then it
will trigger firmware assert failure.
Check the flag and set swap box after htc ready will fix the firmware
assert failure.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00005-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The hw-restart crash inject mode is a special mode, where
there is no crash generated in the firmware, but instead
the driver restarts the firmware. In order to restart WCN3990
firmware, the driver needs to send qmi_wlan_disable message
followed by the qmi_wlan_enable message to the WCN3990 firmware.
Currently the qmi_wlan_disable message is not sent to
the WCN3990 firmware when hw-restart crash is injected,
which causes the firmware to crash when the driver sends
qmi_wlan_enable message during ath10k_restart.
Send qmi_wlan_disable to the WCN3990 firmware when the
hw-restart crash is injected via debugfs.
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The management frames transmitted are dma mapped with
direction TO_DEVICE, but incorrectly mapped with
direction FROM_DEVICE during tx complete and error cases.
Fix the direction of dma during dma unmap of the
transmitted management frames.
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Fixes: 38a1390e02 ("ath10k: dma unmap mgmt tx buffer if wmi cmd send fails")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
WCN3990 sends tx completion of multiple management
frames bundled together in a single event, if the
host driver exposes the support to handle this
bundled tx completion event. This reduces the number
of WMI events which are sent to the host driver by
the target.
Set the BUNDLE_TX_COMPL flag in the host capability
flags when host sends the wmi init command, to indicate
the host capability to handle bundled tx completion for
management frames.
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
WCN3990 supports sending tx completion for multiple
management frames bundled together in a single event.
Add support to handle the bundled tx completion
event for WCN3990.
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
HOST capability interface data structures are updated
in HL3.1 fw version. Update the qmi host capability
members for compatibility across different firmware
versions.
Since this change breaks backward compatibility with
HL2.0 fw, HL2.0 fw upgrade to WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1
or later version is required.
Testing:
Tested on QCS404 platform(WCN3990 HW).
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1,
WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
With current n_voltages setting, regulator_list_voltage will return
-EINVAL when selector >=57. The highest selector is 0x41, so the
n_voltages should be 0x41+1, i.e. 66.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently "0xf << 36" is used to
clear SSIU-9 internal buffer state, which overflows 32-bit value
according to user reference manual, it is always bit4 ~ bit7
of SSI_SYS_STATUS[1,3,5,7] registers indicate
SSIU-9's buffer state, so "0xf << 4" should be used.
This patch fix incorrect shifting issue in SSIU-9 case
Fixes: commit b7169ddea2 ("ASoC: rsnd: remove RSND_REG_ from rsnd_reg")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull HID fix from Jiri Kosina:
"A fix for a bug in hid-debug that can lock up the kernel in infinite
loop (CVE-2019-3819), from Vladis Dronov"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: debug: fix the ring buffer implementation
On systems with VHE the kernel and KVM's world-switch code run at the
same exception level. Code that is only used on a VHE system does not
need to be annotated as __hyp_text as it can reside anywhere in the
kernel text.
__hyp_text was also used to prevent kprobes from patching breakpoint
instructions into this region, as this code runs at a different
exception level. While this is no longer true with VHE, KVM still
switches VBAR_EL1, meaning a kprobe's breakpoint executed in the
world-switch code will cause a hyp-panic.
echo "p:weasel sysreg_save_guest_state_vhe" > /sys/kernel/debug/tracing/kprobe_events
echo 1 > /sys/kernel/debug/tracing/events/kprobes/weasel/enable
lkvm run -k /boot/Image --console serial -p "console=ttyS0 earlycon=uart,mmio,0x3f8"
# lkvm run -k /boot/Image -m 384 -c 3 --name guest-1474
Info: Placing fdt at 0x8fe00000 - 0x8fffffff
Info: virtio-mmio.devices=0x200@0x10000:36
Info: virtio-mmio.devices=0x200@0x10200:37
Info: virtio-mmio.devices=0x200@0x10400:38
[ 614.178186] Kernel panic - not syncing: HYP panic:
[ 614.178186] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004
[ 614.178186] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de
[ 614.178186] VCPU:00000000f8de32f1
[ 614.178383] CPU: 2 PID: 1482 Comm: kvm-vcpu-0 Not tainted 5.0.0-rc2 #10799
[ 614.178446] Call trace:
[ 614.178480] dump_backtrace+0x0/0x148
[ 614.178567] show_stack+0x24/0x30
[ 614.178658] dump_stack+0x90/0xb4
[ 614.178710] panic+0x13c/0x2d8
[ 614.178793] hyp_panic+0xac/0xd8
[ 614.178880] kvm_vcpu_run_vhe+0x9c/0xe0
[ 614.178958] kvm_arch_vcpu_ioctl_run+0x454/0x798
[ 614.179038] kvm_vcpu_ioctl+0x360/0x898
[ 614.179087] do_vfs_ioctl+0xc4/0x858
[ 614.179174] ksys_ioctl+0x84/0xb8
[ 614.179261] __arm64_sys_ioctl+0x28/0x38
[ 614.179348] el0_svc_common+0x94/0x108
[ 614.179401] el0_svc_handler+0x38/0x78
[ 614.179487] el0_svc+0x8/0xc
[ 614.179558] SMP: stopping secondary CPUs
[ 614.179661] Kernel Offset: disabled
[ 614.179695] CPU features: 0x003,2a80aa38
[ 614.179758] Memory Limit: none
[ 614.179858] ---[ end Kernel panic - not syncing: HYP panic:
[ 614.179858] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004
[ 614.179858] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de
[ 614.179858] VCPU:00000000f8de32f1 ]---
Annotate the VHE world-switch functions that aren't marked
__hyp_text using NOKPROBE_SYMBOL().
Signed-off-by: James Morse <james.morse@arm.com>
Fixes: 3f5c90b890 ("KVM: arm64: Introduce VHE-specific kvm_vcpu_run")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We restrict mapping the PUD huge pages in stage2 to only when the
stage2 has 4 level page table, leaving the feature unused with
the default IPA size. But we could use it even with a 3
level page table, i.e, when the PUD level is folded into PGD,
just like the stage1. Relax the condition to allow using the
PUD huge page mappings at stage2 when it is possible.
Cc: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently initialize the group of private IRQs during
kvm_vgic_vcpu_init, and the value of the group depends on the GIC model
we are emulating. However, CPUs created before creating (and
initializing) the VGIC might end up with the wrong group if the VGIC
is created as GICv3 later.
Since we have no enforced ordering of creating the VGIC and creating
VCPUs, we can end up with part the VCPUs being properly intialized and
the remaining incorrectly initialized. That also means that we have no
single place to do the per-cpu data structure initialization which
depends on knowing the emulated GIC model (which is only the group
field).
This patch removes the incorrect comment from kvm_vgic_vcpu_init and
initializes the group of all previously created VCPUs's private
interrupts in vgic_init in addition to the existing initialization in
kvm_vgic_vcpu_init.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Failing to properly reset system registers is pretty bad. But not
quite as bad as bringing the whole machine down... So warn loudly,
but slightly more gracefully.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
The current kvm_psci_vcpu_on implementation will directly try to
manipulate the state of the VCPU to reset it. However, since this is
not done on the thread that runs the VCPU, we can end up in a strangely
corrupted state when the source and target VCPUs are running at the same
time.
Fix this by factoring out all reset logic from the PSCI implementation
and forwarding the required information along with a request to the
target VCPU.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
We have two ways to reset a vcpu:
- either through VCPU_INIT
- or through a PSCI_ON call
The first one is easy to reason about. The second one is implemented
in a more bizarre way, as it is the vcpu that handles PSCI_ON that
resets the vcpu that is being powered-on. As we need to turn the logic
around and have the target vcpu to reset itself, we must take some
preliminary steps.
Resetting the VCPU state modifies the system register state in memory,
but this may interact with vcpu_load/vcpu_put if running with preemption
disabled, which in turn may lead to corrupted system register state.
Address this by disabling preemption and doing put/load if required
around the reset logic.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There was a divergence between Linux and ACPICA on the definition of
ACPI_DEBUG_DEFAULT. This divergence was solved by taking ACPICA's
definition in 4c1379d7bb. After resolving the divergence, it was
clear that Linux users wanted to use their old set of debug flags.
This change fixes the divergence by setting these debug flags during
acpi_early_init() rather than during global variable initialization
in acpixf.h (owned by ACPICA).
Fixes: 4c1379d7bb ("ACPICA: Debug output: Add option to display method/object evaluation")
Reported-by: Michael J Ruhl <michael.j.ruhl@intel.com>
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=8LtS
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20190204' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Pull vfio-ccw from Cornelia Huck with the following changes:
- A fix in ccw chain processing.
The z14 introduced alignment hints to increase the performance of
vector loads and stores. The kernel uses an implicit alignmenet
of 8 bytes for the vector registers, set the alignment hint to 3.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There is no need to use void pointers, all drivers are in agreement
about the underlying data structure of the SBAL arrays.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Map IOV resources such that pci common code recognizes the IOV
capability of PFs.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Improve the bar check in pci_iomap_range to cover functions
for which we recognize more bars than what we can access due
to AR restrictions.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The s390 version of the mmap_base function is ignorant of stack_guard_gap
which can lead to a placement of the stack vs. the mmap base that does not
leave enough space for the stack rlimit.
Add the stack_guard_gap to the calculation and while we are at it the
check for gap+pad overflows as well.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove some dead code from head64.S, which was left over since commit
da292bbe1f ("[S390] eliminate ipl_device from lowcore") removed
ipl_device from lowcore.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The #ifdef CONFIG_DMA_API_DEBUG check in reserve_kernel() is no longer
needed, since commit ea535e418c ("dma-debug: switch check from _text
to _stext") changed the logic in lib/dma-debug.c, so remove it.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This reverts commit 9594ca6b87.
With the handle_simple_irq irq_flow_handler it must be ensured to
not call generic_handle_irq with the same IRQ number on 2 CPUs at
the same time (interrupts are floating on s390).
Contrary to my initial investigation the irq_desc's lock usage in
handle_simple_irq does not ensure this. Thus re-introduce the bit-
lock usage in s390's pci handler.
Reported-by: Ursula Braun <ubraun@linux.ibm.com>
Reported-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Work on the new debugging infrastructure continues;
* HE radiotap;
* Support for new FW version 44;
* A couple of new FW API changes;
* A bunch of fixes for static analyzer reported issues;
* General bugfixes;
* Other cleanups and small fixes;
-----BEGIN PGP SIGNATURE-----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=ckmd
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2019-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Third batch of iwlwifi patches intended for v5.1
* Work on the new debugging infrastructure continues;
* HE radiotap;
* Support for new FW version 44;
* A couple of new FW API changes;
* A bunch of fixes for static analyzer reported issues;
* General bugfixes;
* Other cleanups and small fixes;
A collection of a few small fixes. The most significant one is the
fix for the possible race at loading HD-audio drivers. This has been
present for long time and surfaced only in a rare occasion, but
finally spotted out.
The rest are usual device-specific fixes for HD-audio and USB-audio.
-----BEGIN PGP SIGNATURE-----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=aD7u
-----END PGP SIGNATURE-----
Merge tag 'sound-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of a few small fixes.
The most significant one is the fix for the possible race at loading
HD-audio drivers. This has been present for long time and surfaced
only in a rare occasion, but finally spotted out"
* tag 'sound-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/ca0132 - Fix build error without CONFIG_PCI
ALSA: compress: Fix stop handling on compressed capture streams
ALSA: usb-audio: Add support for new T+A USB DAC
ALSA: hda - Serialize codec registrations
ALSA: hda/realtek - Use a common helper for hp pin reference
ALSA: hda/realtek - Fix lose hp_pins for disable auto mute
ALSA: hda/realtek - Headset microphone support for System76 darp5
A small fix for a uapi header, and a fix for VDPA for non-x86 guests.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcWfKsAAoJECgfDbjSjVRpz8AIALAFWg40sy8n1LjcDoTar9oP
YRrKUD7ag4dL8I41kbu4Vk8GQG1cSKFxk+PnZ4lhyiJGUgcd267qoUf3Kk9MxL94
IvMxa/Y2qPiSpEIwJGDxikJNaqcSDTJXYgs6zjCLHgo35WUbmAxVh3iZDWkpaKKl
mql+DsotNhEYE5BGAi8OhPIbGOtumkhCy6JySBD+trHyivKIotKaPN6PoNudPRQU
ipP1YlTZQL2vYp3vwbwjaO4IKo/17IDQtzHxLQU2Q1ZORSPOctjffmF74qfDkNKl
pqWYXwVbq8/EuKyhNexAqU3vkSQaLUEMthzi5d/Z7QYeJt/K5xcpgkKHYm1lZ/U=
=XTXV
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A small fix for a uapi header, and a fix for VDPA for non-x86 guests"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: drop internal struct from UAPI
virtio: support VIRTIO_F_ORDER_PLATFORM
- Cut and paste fix to have uprobe printks say "uprobe" and not "kprobe"
- Add terminating '\0' byte when copying of function arguments
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXFsNwBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlSLAP9iup0t8BrDYcJQCNIJK+7hwBdB642c
11qbWE7aXfsyUwEAu78tJfQfmBeZz7mHxKeMkTHQHE2IqV5qU311twOFiAE=
=zkXr
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This has two fixes for uprobe code.
- Cut and paste fix to have uprobe printks say "uprobe" and not
"kprobe"
- Add terminating '\0' byte when copying function arguments"
* tag 'trace-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/uprobes: Fix output for multiple string arguments
tracing: uprobes: Fix typo in pr_fmt string
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXFls+wAKCRDh3BK/laaZ
PC+hAQDRkyJeAmMzpHwvv/IASqpJgc6HrSzH0p201lDyARcKIAD+MWxZHYP4ltAn
WVTLIvYT1xsoqGG3plfZ/d1iNbAWcwU=
=cL/O
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"A fix for a CUSE regression introduced in v4.20, as well as fixes for
a couple of old bugs"
* tag 'fuse-fixes-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: decrement NR_WRITEBACK_TEMP on the right page
fuse: call pipe_buf_release() under pipe lock
cuse: fix ioctl
fuse: handle zero sized retrieve correctly
The EMAC driver had a custom IBM_EMAC_RX_SKB_HEADROOM
Kconfig option that reserved additional skb headroom for RX.
This patch removes the option and migrates the code
to use napi_alloc_skb() and netdev_alloc_skb_ip_align()
in its place.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8c56df372b ("net: add support for Cavium PTP coprocessor") added the
Cavium PTP coprocessor driver and enabled it by default. Remove the
"default y" because the driver only applies to Cavium ThunderX processors.
Fixes: 8c56df372b ("net: add support for Cavium PTP coprocessor")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's make genphy_c45_read_link behave the same as genphy_update_link
and set phydev->link in the function directly. This allows to simplify
the callers. In addition don't check further devices once we detect
that at least one device reports link as down.
v2:
- remove an unused variable
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_consume_skb_irq() should be called in sbdma_tx_process() when
skb xmit done. It makes drop profiles(dropwatch, perf) more
friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_consume_skb_irq() should be called in velocity_free_tx_buf()
when skb xmit done. It makes drop profiles(dropwatch, perf) more
friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_consume_skb_irq() should be called in bdx_tx_cleanup() when skb
xmit done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
