In addition, moving to kms->flush_commit() lets us drop the only user
of kms->commit().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
With atomic commit, ->prepare_commit() and ->complete_commit() may not
be evenly balanced (although ->complete_commit() will complete each
crtc that had been previously prepared). So these will no longer be
a good place to enable/disable clocks needed for hw access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Add ->flush_commit(crtc_mask). Currently a no-op, but kms backends
should migrate writing flush registers to this hook, so we can decouple
pushing updates to hardware, and flushing the updates.
Once we add async commit support, the hw updates will be pushed down to
the hw synchronously, but flushing the updates will be deferred until as
close to vblank as possible, so that multiple updates can be combined in
a single frame.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Prep work for async commits, in which case this will be called after we
no longer have the atomic state object.
This drops some wait_for_vblanks(), but those should be unnecessary, as
we call this after waiting for flush to complete.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
First step in re-working the atomic related internal API to prepare for
async updates pending.. ->wait_flush() is intended to block until there
is no in-progress flush.
A crtc_mask is used, rather than an atomic state object, as this will
later be used for async flush after the atomic state is destroyed.
This replaces ->wait_for_crtc_commit_done()
v2: update for review comments
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously the callback was called from whoever called wait_for_vblank(),
but that isn't a great plan when wait_for_vblank() stops getting called,
and results in frame_done_timer expiring.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Just waiting for next vblank isn't ideal.. we should really be looking
at the hw FLUSH register value to know if there is still an in-progress
flush without stalling unnecessarily when there is no pending flush.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
It attempted to avoid fps drops in the presence of cursor updates. But
it is racing, and can result in hw updates after flush before vblank,
which leads to underruns.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The extra line-break in traces was annoying me.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously, dpu_crtc_frame_event_work() would try to aquire all the
modeset locks in order to check whether it can release bandwidth. (If
we only have cmd-mode display, bandwidth can be released at frame-done
time.)
The problem with this is that it is also responsible for signalling
frame_done_comp, which dpu_crtc_commit_kickoff() waits on if there is
already a frame pending. This is called in the msm_atomic_commit_tail()
path.. which means that for non-nonblock commits, at least some of the
modeset locks are already held.
Re-work this scheme to use a reference count to track our need to have
clocks enabled. It is incremented for each atomic commit, and
decremented in the corresponding frame-done. Additionally, any crtc
used in video mode hold an extra reference while they are enabled. The
net effect is that we can determine in frame-done whether it is safe to
drop bandwidth without needing to aquire any modeset locks.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Unused and the extra rpm get/put interferes with handover from
bootloader (ie. happens before we have a chance to check if
things are already enabled).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The DPU has some kind of idea that it wants to be able to
bring up power using GPIO lines. The struct dss_gpio is however
completely unused and should this be done, it should be done
using the GPIO descriptor framework rather than this API
which relies on the global GPIO numberspace. Delete this
code before anyone hurt themselves.
The inclusion of <linux/gpio.h> was abused to get some OF
and IRQ headers implicitly included into the DPU utilities,
make these includes explicit and push them down into the actual
implementation.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Drop the deprecated drmP.h header file, and trim msm_drv.h
to the relevant include files.
This resulted in a suprisingly many edits as many files relied
on headers included via msm_drv.h.
But msm_drv.h is not supposed to carry include files it do not need, so
the individual files have to include what extra they needs.
v2:
- Rebased on top of https://gitlab.freedesktop.org/drm/msm.git msm-next
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Bruce Wang <bzwang@chromium.org>
Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Carsten Behling <carsten.behling@googlemail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Todor Tomov <todor.tomov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804065551.GA5211@ravnborg.org
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXUwPUAAKCRDj7w1vZxhR
xQ4lAQDK2ijx29YHeZspbOwP4Nwq95DFs1uQcSm5GvbRt1JSowD9EwkLeNfkPkel
Xv1Ts/Frgq7ckH2e2zkLPyCOFCHd0wA=
=rIUl
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
dpu encoder spinlock should be initialized during dpu encoder
init instead of dpu encoder setup which is part of modeset init.
Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org>
[seanpaul resolved conflict in old init removal and revised the commit message]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1561357632-15361-1-git-send-email-dhar@codeaurora.org
+ usual progress on cleanups
+ dsi vs EPROBE_DEFER fixes
+ msm8998 (snapdragon 835 support)
+ a540 gpu support (mesa support already landed)
+ dsi, dsi-phy support
+ mdp5 and dpu interconnect (bus/memory scaling) support
+ initial prep work for per-context pagetables (at least the parts that
don't have external dependencies like iommu/arm-smmu)
There is one more patch for fixing DSI cmd mode panels (part of a set of
patches to get things working on nexus5), but it would be conflicty with
1cff7440a8 in drm-next without rebasing or back-merge,
and since it doesn't conflict with anything in msm-next, I think it best
if Sean merges that through drm-mix-fixes instead.
(In other news, I've been making some progress w/ getting efifb working
properly on sdm850 laptop without horrible hacks, and drm/msm + clk stuff
not totally falling over when bootloader enables display and things are
already running when driver probes.. but not quite ready yet, hopefully
we can post some of that for 5.4.. should help for both the sdm835 and
sdm850 laptops.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsj3N4XzDLSDoa+4RHZ9wXObYmhcep0M3LjnRg48BeLvg@mail.gmail.com
msm has switched over to drm_fb->obj[] a while ago already, so we can
just use the helper.
v2: Make it compile ... oops.
Cc: Eric Anholt <eric@anholt.net>
Cc: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Bruce Wang <bzwang@chromium.org>
Cc: Fritz Koenig <frkoenig@google.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190625204208.5614-3-daniel.vetter@ffwll.ch
Use drm_atomic_helper_dirtyfb() as the dirty callback in the
msm_framebuffer_funcs struct. Call drm_plane_enable_fb_damage_clips()
when the planes are initialized in mdp4, mdp5, and dpu1.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix the error paths in _dpu_kms_mmu_init() to properly
clean up the iommu domain and not call _dpu_kms_mmu_destroy() when
things are only partially setup.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617200405.131843-2-sean@poorly.run
dpu_mdss_destroy() can get called not just from
msm_drm_uninit() but also from msm_drm_bind() in case
of any failures.
dpu_mdss_destroy() removes the icc voting by calling
icc_put. This could accidentally remove the voting
done by pm_runtime_enable.
To make the voting balanced add a minimum vote in
dpu_mdss_init() to avoid any unclocked access.
This change depends on the following patch which
introduces interconnect binding to MDSS driver:
https://patchwork.codeaurora.org/patch/708155/
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The interconnect framework is designed to provide a
standard kernel interface to control the settings of
the interconnects on a SoC.
The interconnect API uses a consumer/provider-based model,
where the providers are the interconnect buses and the
consumers could be various drivers.
MDSS is one of the interconnect consumers which uses the
interconnect APIs to get the path between endpoints and
set its bandwidth requirement for the given interconnected
path.
Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)
Changes in v3:
- Code clean involving variable name change, removal
of extra paranthesis and variables (Matthias Kaehlcke)
Changes in v4:
- Add comments, spacings, tabs, proper port name
and icc macro (Georgi Djakov)
Changes in v5:
- Commit text and parenthesis alignment (Georgi Djakov)
Changes in v6:
- Change to new icc_set API's (Doug Anderson)
Changes in v7:
- Fixed a typo
Changes in v8:
- Handle the of_icc_get() returning NULL case. In practice
icc_set_bw() will gracefully handle the case of a NULL path,
but it's probably best for clarity to keep num_paths=0 in
this case.
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Since the upstream interconnect bus framework has landed
upstream, the existing references of custom bus scaling
needs to be cleaned up.
Changes in v2:
- Fixed build error due to partial clean up
Changes in v3:
- Condense multiple lines into a single line (Sean Paul)
Changes in v4-v7:
- None
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
N6MC6xA=
=+B0P
-----END PGP SIGNATURE-----
Merge v5.2-rc5 into drm-next
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the failure path for dpu_kms_init() it is possible to get to the MMU
destroy function with uninitialized MMU structs. Check for NULL and skip
if needed.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
If enabling clocks fails in msm_dss_enable_clk() the code to unwind the
settings starts at 'i' which is the clock that just failed. While this
isn't harmful it does result in a number of warnings from the clock
subsystem while trying to unpreare/disable the very clock that had
just failed to prepare/enable. Skip the current failed clock during
the unwind to to avoid the extra log spew.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Bruce Wang <bzwang@chromium.org>
Cc: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Cc: Fritz Koenig <frkoenig@google.com>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of reaching into dev->primary for debugfs_root, use the minor
passed into debugfs_init.
This avoids creating the debug directory under /sys/kernel/debug/ and
instead creates the directory under the correct node in
/sys/kernel/debug/dri/<node>/
Reported-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524173231.5040-1-sean@poorly.run
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm_format_horz_chroma_subsampling and drm_format_vert_chroma_subsampling
are basically a lookup in the drm_format_info table plus an access to the
hsub and vsub fields of the appropriate entry.
Most drivers are using this function while having access to the entry
already, which means that we will perform an unnecessary lookup. Removing
the call to these functions is therefore more efficient.
Some drivers will not have access to that entry in the function, but in
this case the overhead is minimal (we just have to call drm_format_info()
to perform the lookup) and we can even avoid multiple, inefficient lookups
in some places that need multiple fields from the drm_format_info
structure.
This is amplified by the fact that most of the time the callers will have
to retrieve both the vsub and hsub fields, meaning that they would perform
twice the lookup.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b3cceb8161e2c1d40c2681de99202328b0a8abc.1558002671.git-series.maxime.ripard@bootlin.com
drm_format_num_planes() is basically a lookup in the drm_format_info table
plus an access to the num_planes field of the appropriate entry.
Most drivers are using this function while having access to the entry
already, which means that we will perform an unnecessary lookup. Removing
the call to drm_format_num_planes is therefore more efficient.
Some drivers will not have access to that entry in the function, but in
this case the overhead is minimal (we just have to call drm_format_info()
to perform the lookup) and we can even avoid multiple, inefficient lookups
in some places that need multiple fields from the drm_format_info
structure.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5ffcec9d14a50ed538e37d565f546802452ee672.1558002671.git-series.maxime.ripard@bootlin.com
The msm_gem_object structure contains resv and _resv fields that are
no longer needed since the reservation object is now stored on
drm_gem_object. msm_atomic_prepare_fb() and msm_atomic_prepare_fb()
both referenced the wrong reservation object, and would lead to an
attempt to dereference a NULL pointer. Correct those two cases to
point to the correct reservation object.
Fixes: dd55cf6929 ("drm: msm: Switch to use drm_gem_object reservation_object")
Cc: David Airlie <airlied@linux.ie>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: Rob Herring <robh@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513234105.7531-1-masneyb@onstation.org
Remove duplicate headers which are included twice.
Signed-off-by: Jagadeesh Pagadala <jagdsh.linux@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Dave Airlie <airlied@linux.ie>
[danvet: drop changes to panel-raspberrypi, they break the build]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1556906293-128921-1-git-send-email-jagdsh.linux@gmail.com
Convert msm to using __drm_atomic_helper_crtc_reset(), instead of
writing its own version. Instead of open coding
destroy_state(), call it directly for freeing the old state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
[mlankhorst: Remove double assignment of mdp5_cstate in reset (seanpaul)]
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-11-maarten.lankhorst@linux.intel.com
Iterate and assign HW intf block to physical encoders
in encoder modeset. Moving all the HW block assignments
to encoder modeset to allow easy switching to state
based resource management.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-7-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
After resource allocation, iterate and populate mixer/ctl
hw blocks in encoder modeset thereby centralizing all
the resource mapping to the CRTC. This change is made
for easy switching to state based allocation using
private objects later in this series.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-6-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
