Komeda HW can support dual-link which splits display frame to two halves
(left/link0, right/link1) and output them by two output links.
Due to the halved pixel rate of each link, the pxlclk of dual-link can be
reduced two times compare with single-link.
For enabling dual-link:
- The DT need to configure two output-links for the pipeline node.
- Komeda enable dual-link when both link0 and link1 have been connected.
Example of how the pipeline node will look like for dual-link setup
pipe0: pipeline@0 {
clocks = <&fpgaosc2>;
clock-names = "pxclk";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
dp0_pipe0_link0: endpoint@0 {
reg = <0>;
remote-endpoint = <&dlink_connector_in0>;
};
dp0_pipe0_link1: endpoint@1 {
reg = <1>;
remote-endpoint = <&dlink_connector_in1>;
};
};
};
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081013.13638-3-james.qian.wang@arm.com
For layer_split no need user to enable/disable it, but compute it in
komeda internally, komeda will enable it if the scaling exceed the
acceptable range of scaler.
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708065923.4887-1-james.qian.wang@arm.com
Writeback split is also for workaround the size limitation of d71 scaler.
Like layer_split, writeback downscaling also can use two scalers to handle
the scaling half-by-half. The only differnence is writback needs a
standalone component (splitter)'s help to split the composition result.
The data pipeline of writeback split as below:
/-> scaler-0 ->\
compiz -> splitter merger -> wb_layer -> memory
\-> scaler-1 ->/
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
One crtc can use two komeda_pipeline, and one works as master and as
slave. the slave pipeline doesn't have its own output and timing
ctrlr, but pre-composite the input layer data flow and then feed the
result to master. the pipeline configuration like:
slave-layer-0 \
... slave->CU
slave-layer-4 / \
\
master-layer-0 --------> master->CU -> ...
... /
master-layer-4 ------>
Since komeda Compiz doesn't output alpha, so the slave->CU result
only can be used as bottom input when blend it with master input data
flows.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Komeda supports two types of layer split:
- none-scaling split
- scaling split
Since D71 merger only support scaler as input, so for none-scaling split,
the two layer dflow will be output to compiz directly. for scaling_split,
the data flow will be merged by merger firstly, then output the merged
data flow to compiz.
Komeda handles the split in kernel completely to hide the detailed and
complicated split calcualtion to user mode, for user only need to set the
layer_split property to enable/disable it.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
To achieve same caling effect compare with none split, the texel
calculation need to use the same scaling ratio before split, so add
"total_xxx" to pipeline to describe the hsize/vsize before split.
Update pipeline and d71_scaler_update accordingly.
v2: Rebase and addressed Liviu's comments
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
To avoid confusion, unify the driver main engine clk name "mclk" to
the spec name "aclk".
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Add komeda_fb_check_src_coords and check if the layer configured src
rect can meet the requirement of fb and fb format.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Komeda series hardware doesn't support Rot90 for AFBC wide block. So
add limitation check to reject it if such configuration has been posted.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
- Adds rotation property to plane.
- Komeda display rotation support diverges from the specific formats,
so need to check the user required rotation type with the format caps
and reject the commit if it can not be supported.
- In the layer validate flow, sets the rotation value to the layer
state. If r90 or r270, swap the width and height of the data flow
for next stage.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Besides scaling, Arm display scaler also can support image enhancement.
For support it, Add a new property "img_enhancement" to plane, then user
can turn on/off it by this property, and kernel follow user's requirement
to maitain the state and enable/disable the real HW image enhancement.
v2: Rebase and rename "needs_img_enhancement" to "en_img_enhancement"
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
For downscaling there is a restriction, the downscaling needed engine
clock can not acceed the real engine clock, and the clock requirement
mostly depend on the specific HW, to solve this problem:
1. Add a pipeline func - downscaling_clk_check for CORE to query the real
HW if downscaling can be supported.
2. Add new property clock ratio which is the ratio of:
(mclk << 32) / pxlclk
then User driver can use this ratio to do the clock check to avoid post
an invalid downscaling to kernel.
v2: Rebase and Delete debug print
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
1. Add scaler to writeback pipeline to enable the writeback scaling support
2. Display HW can not do upscaling for writeback, check it when validate.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
This patch add the initial and necessary logic for CORE to support scaler:
- Complete the struct komeda_scaler and komeda_scaler_state for adding
the scaler specific features and capablities.
- Implement komeda_scaler_validate to check the scaler with the data flow
configurations.
- Enable scaling support for plane input path (layer input data flow).
v2: Fix a typo, and rename "needs_scaling" to "en_scaling"
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
For supporting AFBC:
1. Check if the user requested modifier can be supported by display HW.
2. Check the obj->size with AFBC's requirement.
3. Configure HW according to the modifier (afbc features)
This patch depends on:
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/59000/
v2: Rebase and addressed Ayan's comments
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Komeda driver uses a individual component to describe the HW's writeback
caps, but drivers doesn't define a new structure and still uses the
existing "struct komeda_layer" to describe this new component.
The detailed changes as follow:
1. Initialize wb_layer according to HW and report it to CORE.
2. CORE exposes wb_layer as a resource to KMS by private_obj.
3. Report writeback supporting by add a wb_connector to KMS, and then
wb_connector will take act as a component resources user,
so the func komeda_wb_encoder_atomic_check claims komeda resources
(scaler and wb_layer) accroding to its state configuration to the
wb_connector. and the wb_state configuration will be validated on the
specific component resources to see if the caps of component can
meet the requirement of wb_connector. if not check failed.
4. Update irq_handler to notify the completion of writeback.
NOTE:
This change doesn't add scaling writeback support, that support will
be added in the future after the scaler support.
v2: Rebase
v3: Rebase and constify the d71_wb_layer_funcs
v4: Addressed Ayan's comments
Depends on:
- https://patchwork.freedesktop.org/series/59915/
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Fix the kbuild test rebot reported warnings:
- symbol was not declared. Should it be static?
- missing braces around initializer
Depends on:
- https://patchwork.freedesktop.org/series/58976/
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Pass enable/disable command to komeda and adjust komeda hardware for
enable/disable a display instance.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
A komeda flush is comprised two steps:
1. update pipeline/component state to HW.
2. call dev_func->flush to notify HW to kickoff the update.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Komeda driver treats KMS-CRTC/PLANE as user which will acquire pipeline
resources, but we still need to release the unclaimed resources.
crtc_atomic_check is the final check stage, so beside build a display data
pipeline according the crtc_state, but still needs to release/disable the
unclaimed pipeline resources.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
This function builds a display output pipeline according to crtc_state.
And this change only added single pipeline support, the dual pipeline with
slave enabled data flow support will be added in the following change.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
build_layer_data_flow builds a input pipeline according to plane_state.
and in this initial stage only added this simplest pipeline usage:
Layer -> compiz
The scaler and layer_split will be added in the future.
v2:
- Rebase.
- Introduce struct komeda_data_flow_cfg
- Add a function komeda_component_validate_private to replace the MACRO
component_validate_private
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
get_state_and_set_user packed get_state and set_user into one function,
which get pipeline/component state for a specific pipeline/component, if
success set the user to it.
v2:
- Rebase.
- Applied commit:
b962a12050 ("drm/atomic: integrate modeset lock with private objects")
And delete our private modeset lock for pipeline.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
