Commit Graph

4024 Commits

Author SHA1 Message Date
Linus Torvalds
d4113f2f17 ARM: SoC: late fixes and dependencies
This is a collection of a few late fixes and other misc. stuff that
 had dependencies on things being merged from other trees.
 
 Other than the fixes, the primary feature being added is the
 conversion of some OMAP drivers to the new generic wakeirq interface.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVlXl/AAoJEFk3GJrT+8ZlDccQAJ5vxvImNvJmoqeCv+6Tkshm
 UOGtoTBWKu+1wVgvYvYWXbNL06NKtS1c/CP8CZE0V6XdLQ+EHd4RWsHyRLHi4xwS
 6qqtwVfqYwFLli++87NKqzizl01a0eImPiHl5Rwo9oFy0u81+lsivwWbCBk+Dh0n
 HtkmuKzWnKSYL3rgnApq1USL4dhbc6SbNYo0pwvZXNDTK57FrQN/2Z2Pl1FZS9RQ
 BQgnqDSdhvF5PD/fWJ5KHs2k2WDtjMMN2TgVMtMjMg2x5kSMAN6fBwi49wYgcwUz
 ndHtuHosX4BkPgDHvzIv7jRCYHeRaHOYxbPG+tzYXci4gXUUEn3i8jte91Hb3+ri
 tDcgAnod+R1SoBmSRdj/nqM7Y8Qw7Pnjo2tuKYfb1NFaX5KtjrjaaDx/09G7PD+U
 fw400HKPi4r2h11n96Y5MZUbLv9XgB9BAePmIdNLuQZabFc1DcsUOG9JbRsMArRT
 5g6Sk+Lar9FGH32fLk5sGEAroFs52YmGmLviHKiAsbBSOV751SN2AcA8NDXBuKI1
 L+hC41NslENztHTgLsmEt6YY4H/4+jW66du5GYc4ZkPd1scO2+esXDzPZ864vxo+
 rIIMnRNQHb2hGiNvImyzEt2NgelSk/xKQR5Dl6MNiKCmiyw2XHlR5UTkRRBZXDd+
 5T1KnOvKE2THuxWyWARH
 =bhUU
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late fixes and dependencies from Kevin Hilman:
 "This is a collection of a few late fixes and other misc stuff that had
  dependencies on things being merged from other trees.

  Other than the fixes, the primary feature being added is the
  conversion of some OMAP drivers to the new generic wakeirq interface"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: Enable BRCMNAND driver
  ARM: BCM: Do not select CONFIG_MTD_NAND_BRCMNAND
  ARM: at91/dt: update udc compatible strings
  ARM: at91/dt: trivial: fix USB udc compatible string
  arm64: dts: Add APM X-Gene standby GPIO controller DTS entries
  soc: qcom: spm: Fix idle on THUMB2 kernels
  ARM: dove: fix legacy dove IRQ numbers
  ARM: mvebu: fix suspend to RAM on big-endian configurations
  ARM: mvebu: adjust Armada XP DT spi muxing after pinctrl function rename
  serial: 8250_omap: Move wake-up interrupt to generic wakeirq
  serial: omap: Switch wake-up interrupt to generic wakeirq
  mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq
2015-07-02 14:40:49 -07:00
Linus Torvalds
ad90fb9751 Merge branch 'for-4.2/sg' of git://git.kernel.dk/linux-block
Pull asm/scatterlist.h removal from Jens Axboe:
 "We don't have any specific arch scatterlist anymore, since parisc
  finally switched over.  Kill the include"

* 'for-4.2/sg' of git://git.kernel.dk/linux-block:
  remove scatterlist.h generation from arch Kbuild files
  remove <asm/scatterlist.h>
2015-06-25 15:22:36 -07:00
Rabin Vincent
a8c27c0bea mmc: queue: prevent soft lockups on PREEMPT=n
On systems with CONFIG_PREEMPT=n, under certain circumstances, mmcqd
can continuously process requests for several seconds without blocking,
triggering the soft lockup watchdog.  For example, this can happen if
mmcqd runs on the CPU which services the controller's interrupt, and
a process on a different CPU continuously writes to the MMC block
device.

 NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [mmcqd/0:664]
 CPU: 0 PID: 664 Comm: mmcqd/0 Not tainted 4.1.0-rc7+ #4
 PC is at _raw_spin_unlock_irqrestore+0x24/0x28
 LR is at mmc_start_request+0x104/0x134
 ...
 [<805112a8>] (_raw_spin_unlock_irqrestore) from [<803db664>] (mmc_start_request+0x104/0x134)
 [<803db664>] (mmc_start_request) from [<803dc008>] (mmc_start_req+0x274/0x394)
 [<803dc008>] (mmc_start_req) from [<803eb2c4>] (mmc_blk_issue_rw_rq+0xd0/0xb98)
 [<803eb2c4>] (mmc_blk_issue_rw_rq) from [<803ebe8c>] (mmc_blk_issue_rq+0x100/0x470)
 [<803ebe8c>] (mmc_blk_issue_rq) from [<803ecab8>] (mmc_queue_thread+0xd0/0x170)
 [<803ecab8>] (mmc_queue_thread) from [<8003fd14>] (kthread+0xe0/0xfc)
 [<8003fd14>] (kthread) from [<8000f768>] (ret_from_fork+0x14/0x2c)

Fix it by adding a cond_resched() in the request handling loop so that
other processes get a chance to run.

Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-18 09:21:04 +02:00
Chaotian Jing
4b8a43e90c mmc: mediatek: Add PM support for MMC driver
Add PM support for Mediatek MMC driver
Save/restore registers when PM

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-18 09:21:04 +02:00
Chaotian Jing
208489032b mmc: mediatek: Add Mediatek MMC driver
Add Mediatek MMC driver code
Support eMMC/SD/SDIO

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-18 09:20:48 +02:00
Ding Wang
29535f7b79 mmc: card: Fixup request missing in mmc_blk_issue_rw_rq
The current handler of MMC_BLK_CMD_ERR in mmc_blk_issue_rw_rq function
may cause new coming request permanent missing when the ongoing
request (previoulsy started) complete end.

The problem scenario is as follows:
(1) Request A is ongoing;
(2) Request B arrived, and finally mmc_blk_issue_rw_rq() is called;
(3) Request A encounters the MMC_BLK_CMD_ERR error;
(4) In the error handling of MMC_BLK_CMD_ERR, suppose mmc_blk_cmd_err()
    end request A completed and return zero. Continue the error handling,
    suppose mmc_blk_reset() reset device success;
(5) Continue the execution, while loop completed because variable ret
    is zero now;
(6) Finally, mmc_blk_issue_rw_rq() return without processing request B.

The process related to the missing request may wait that IO request
complete forever, possibly crashing the application or hanging the system.

Fix this issue by starting new request when reset success.

Signed-off-by: Ding Wang <justin.wang@spreadtrum.com>
Fixes: 67716327ee ("mmc: block: add eMMC hardware reset support")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-16 08:58:36 +02:00
Jiri Slaby
62a7f368ff mmc: sdhci: fix low memory corruption
When dma mapping (dma_map_sg) fails in sdhci_pre_dma_transfer, -EINVAL
is returned. There are 3 callers of sdhci_pre_dma_transfer:
* sdhci_pre_req and sdhci_adma_table_pre: handle negative return
* sdhci_prepare_data: handles 0 (error) and "else" (good) only

sdhci_prepare_data is therefore broken. When it receives -EINVAL from
sdhci_pre_dma_transfer, it assumes 1 sg mapping was mapped. Later,
this non-existent mapping with address 0 is kmap'ped and written to:
Corrupted low memory at ffff880000001000 (1000 phys) = 22b7d67df2f6d1cf
Corrupted low memory at ffff880000001008 (1008 phys) = 63848a5216b7dd95
Corrupted low memory at ffff880000001010 (1010 phys) = 330eb7ddef39e427
Corrupted low memory at ffff880000001018 (1018 phys) = 8017ac7295039bda
Corrupted low memory at ffff880000001020 (1020 phys) = 8ce039eac119074f
...

So teach sdhci_prepare_data to understand negative return values from
sdhci_pre_dma_transfer and disable DMA in that case, as well as for
zero.

It was introduced in 348487cb28 (mmc:
sdhci: use pipeline mmc requests to improve performance). The commit
seems to be suspicious also by assigning host->sg_count both in
sdhci_pre_dma_transfer and sdhci_adma_table_pre.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: stable@vger.kernel.org # 4.0+
Fixes: 348487cb28
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-16 08:58:36 +02:00
Vincent Wan
b5e97d6e58 mmc: sdhci-pci: Change AMD SDHCI quirk application scope
Change this quirk to apply to AMD Carrizo platform.

Signed-off-by: Wan ZongShun <Vincent.Wan@amd.com>
Tested-by: Nath, Arindam <Arindam.Nath@amd.com>
Tested-by: Ramesh, Ramya <Ramya.Ramesh@amd.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-16 08:58:35 +02:00
Fabian Frederick
7551847ca0 mmc: queue: use swap() in mmc_queue_thread()
Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-15 10:26:29 +02:00
Prabu Thangamuthu
048fd7e665 mmc: dw_mmc: insmod followed by rmmod will hung for eMMC
Remove module of dw_mmc driver will hung for eMMC devices if we follow the
steps which are listed below,
	insmod dw_mmc.ko
	insmod dw_mmc-pci.ko
	rmmod dw_mmc-pci.ko

The root cause for this issue is, dw_mci_remove() will disable all the
interrupts by programming 0x0 to INTMASK register then it will call
dw_mci_cleanup_slot(). But dw_mci_cleanup_slot() is issuing CMD6 to
disable the eMMC boot partition and it is waiting for Command Complete
interrupt. Since INTMASK was already cleared by dw_mci_remove(), Command
Complete interrupt is not reaching the system. This leads to process hung.

Signed-off-by: Prabu Thangamuthu <prabu.t@synopsys.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-12 09:31:01 +02:00
Tony Lindgren
63e63a1981 Merge branch 'wakeirq-8250' into omap-for-v4.2/wakeirq-v2 2015-06-09 23:37:31 -07:00
Ulf Hansson
5fd26c7ecb mmc: sdhci: Restore behavior while creating OCR mask
Commit 3a48edc4bd ("mmc: sdhci: Use mmc core regulator infrastucture")
changed the behavior for how to assign the ocr_avail mask for the mmc
host. More precisely it started to mask the bits instead of assigning
them.

Restore the behavior, but also make it clear that an OCR mask created
from an external regulator overrides the other ones. The OCR mask is
determined by one of the following with this priority:

1. Supported ranges of external regulator if one supplies VDD
2. Host OCR mask if set by the driver (based on DT properties)
3. The capabilities reported by the controller itself

Fixes: 3a48edc4bd ("mmc: sdhci: Use mmc core regulator infrastucture")
Cc: Tim Kryger <tim.kryger@gmail.com>
Reported-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@gmail.com>
2015-06-08 09:49:57 +02:00
Jisheng Zhang
83dc9fecd5 mmc: sdhci-pxav3: fix device wakeup initialization
MMC_PM_KEEP_POWER doesn't imply MMC_PM_WAKE_SDIO_IRQ, we should only
enable device wake up when MMC_PM_WAKE_SDIO_IRQ is set. And "pm_flags"
is the requested pm features, we should not set it in the host driver.

At the same time, device wakeup is disabled by default, so there's no
need to disable device wakeup explicitly.

This patch fixes the warning as following:

[   64.616651] ------------[ cut here ]------------
[   64.616665] WARNING: CPU: 0 PID: 79 at linux/kernel/irq/manage.c:603 irq_set_irq_wake+0xf0/0x11c()
[   64.616667] Unbalanced IRQ 87 wake disable

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-04 10:03:52 +02:00
Ulf Hansson
1ef48e3ded mmc: core: Attach PM domain prior probing of SDIO func driver
Other subsystem buses attach PM domains during probe, but prior calling
the driver's ->probe() method. During the removal phase, detaching the PM
domain will be done after invoking the driver's ->remove() callback.

Convert the SDIO bus to follow this behavior and add error handling.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-04 10:03:51 +02:00
Ulf Hansson
3056c49c35 mmc: core: Remove redundant ->power_restore() callback for SD
Since the ->reset() callback is implemented for SD, the ->power_restore()
callback has become redundant, let's remove it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-04 10:03:51 +02:00
Ulf Hansson
364549ddc2 mmc: core: Remove redundant ->power_restore() callback for MMC
Since the ->reset() callback is implemented for MMC, the ->power_restore()
callback has become redundant, let's remove it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-04 10:03:51 +02:00
Eric Anholt
1e5a0a9a58 mmc: sdhci-bcm2835: Actually enable the clock
We're currently using a fixed frequency clock specified in the DT, so
enabling is a no-op.  However, the RPi firmware-based clocks driver
can actually disable unused clocks, so when switching to use it we
ended up losing our MMC clock once all devices were probed.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:56:07 +02:00
Eric Anholt
475c9e43bf mmc: sdhci-bcm2835: Clean up platform allocations if sdhci init fails.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:56:07 +02:00
Yangbo Lu
74fd5e30cc mmc: sdhci-of-esdhc: enable interrupt mode to detect card
Enable interrupt mode to detect card instead of polling mode
for P1020/P4080/P5020/P5040/T1040 by removing the quirk
SDHCI_QUIRK_BROKEN_CARD_DETECTION. This could improve data
transferring performance and avoid the call trace caused by
polling card status sometime.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:18 +02:00
Dong Aisheng
4245afff8b mmc: sdhci-esdhc-imx: add quirk SDHCI_QUIRK2_BROKEN_HS200 for imx6qdl
The iMX6Q/DL can not support HS200 mode while iMX6SL and iMX6SX can,
so introduce a new flag to distinguish them.

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:18 +02:00
Dong Aisheng
913d4951a5 mmc: sdhci-esdhc-imx: add imx6sx support
The imx6sx usdhc is derived from imx6sl, the difference is minor.
imx6sx have the errata ESDHC_FLAG_ERR004536 fixed.
So introduce a new compatible string for imx6sx to distinguish them.

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:17 +02:00
Dong Aisheng
18094430d6 mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix
The uSDHC has an ADMA Length Mismatch errata ERR004536 which may
cause ADMA work abnormally. The errata has already been fixed for
i.MX6Q TO1.2 and i.MX6DL TO1.1 by enable the bit 7 in 0x6c register.
Unfortunately this fix is not included in i.MX6SL.
So we disable ADMA for i.MX6SL and use SDMA instead.

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:16 +02:00
Dong Aisheng
b7321042aa mmc: sdhci-esdhc-imx: usdhc does not have missing card interrupt issue
The usdhc does not have missing card interrupt issue, so don't execute
workaround for usdhc.

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:16 +02:00
Dong Aisheng
915be485bd mmc: sdhci-esdhc-imx: merge the same register check into one place
In esdhc_writel_le() function, there's duplicated checking of the same
register as follows:
"if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE))".
Merge them into one and remove the duplicated one.

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:15 +02:00
Adrian Hunter
b69587e2d5 mmc: sdhci-pci: Enable HS400 for some Intel host controllers
Enable detection of HS400 support via capability bit-63
for some Intel host controllers.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:15 +02:00
Adrian Hunter
e1bfad6d93 mmc: sdhci-pci: Add support for drive strength selection for SPT
Implement the select_drive_strength callback to provide
drive strength selection for Intel SPT.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:14 +02:00
Adrian Hunter
cb8496482e mmc: sdhci: Add a callback to select drive strength
Add a callbak to let host drivers select drive
strength.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:14 +02:00
Adrian Hunter
cc4f414c88 mmc: mmc: Add driver strength selection
Add the ability to set eMMC driver strength
for HS200 and HS400.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:14 +02:00
Adrian Hunter
b097e07f57 mmc: mmc: Read card's valid driver strength mask
In preparation for supporing drive strength selection
for eMMC, read the card's valid driver strengths.

Note that though the SD spec uses the term "drive strength",
the JEDEC eMMC spec uses the term "driver strength".

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:13 +02:00
Adrian Hunter
3853a04232 mmc: core: Record card drive strength
In preparation for adding drive strength support
for eMMC, add drive_strength to struct mmc_card
to record the card drive strength for UHS-I modes
and HS200 / HS400. For eMMC this will be needed
when switching between HS200 and HS400.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:13 +02:00
Adrian Hunter
e23350b35d mmc: core: Factor out common code in drive strength selection
Make a new function out of common code used for drive
strength selection.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:12 +02:00
Adrian Hunter
f168359efb mmc: core: Add 'card' to drive strength selection callback
In preparation for supporting also eMMC drive strength,
add the 'card' as a parameter so that the callback can
distinguish different types of cards if necessary.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:12 +02:00
Adrian Hunter
fa021cef1a mmc: core: Simplify card drive strength mask
Card drive strength selection uses a callback to
which a mask of supported drive strengths is passed.
Currently, the bits are checked against the values
in the SD specifications. That is not necessary
because the callback will anyway match the mask
against a valid value. Simplify by taking the mask
as is but still ensuring that the default mandatory
value (type B) is always supported.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:11 +02:00
Adrian Hunter
b4f30a174e mmc: core: Allow card drive strength to be different to host
Initialization of UHS-I modes for SD and SDIO cards
employs a callback to allow the host driver to
choose a drive strength value. Currently that
assumes the card drive strength and host driver
type must be the same value. Change to let the
callback make that decision and return both the
card drive strength and host driver type.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:11 +02:00
Adrian Hunter
75e8a2288c mmc: core: Reset driver type to default
IO state variable drv_type could be set during card
initialization. Consequently, it must be reset to the
default value when setting the initial state.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:10 +02:00
Kuninori Morimoto
89d49a706c mmc: sh_mmcif: calculate best clock with parent clock
MMCIF IP on R-Car series has parent clock which can be set several rate,
and it was not implemented on old SH-Mobile series (= SH-Mobile series
parent clock was fixed rate) R-Car series MMCIF can use more high speed
access if it setups parent clock. This patch adds parent clock setup
method. It will be used if DT has "max-frequency", and then, this driver
assumes it is booted on R-Car Gen2 or later SoC. Because SH-Mobile series
(which doesn't boot from DT) and R-Car series (which boots from DT) have
different divider.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[Ulf: Silence compiler warning]
2015-06-01 09:07:10 +02:00
Kuninori Morimoto
1b1a694d53 mmc: sh_mmcif: use sh_mmcif_xxx prefix for all functions
Current sh_mmcif driver is using sh_mmcif_xxx and mmcif_xxx
for functions. This patch used sh_mmcif_xxx for all functions.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:09 +02:00
Kuninori Morimoto
585c3a5a0b mmc: sh_mmcif: add sh_mmcif_host_to_dev() macro and use it.
Current sh_mmcif driver is directly using &host->pd->dev in all place.
It is not big problem, but it is unreadable, and it can be cause of
future bug. This patch adds new sh_mmcif_host_to_dev() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:09 +02:00
Petri Gynther
43e943a040 mmc: sdhci: fix driver type B and D handling in sdhci_do_set_ios()
sdhci_do_set_ios() doesn't currently program SDHCI_HOST_CONTROL2
register correctly when host->preset_enabled == false.

Add code to handle the missing cases MMC_SET_DRIVER_TYPE_B and
MMC_SET_DRIVER_TYPE_D.

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:09 +02:00
Fabian Frederick
75fda77b25 mmc: mmc-test: use swap() in mmc_test_nonblock_transfer()
Use kernel.h macro definition.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:08 +02:00
Doug Anderson
7c5209c315 mmc: core: Increase delay for voltage to stabilize from 3.3V to 1.8V
Since the regulator used for the SDMMC IO voltage is not expected to
draw a lot of current, most systems will probably use an inexpensive
LDO for it.  LDO regulators apparently have the feature that they
don't actively drive the voltage down--they wait for other components
in the system to drag the voltage down.  Thus they will transition
faster under heavy loads and slower under light loads.

During an SDMMC voltage change from 3.3V to 1.8V, we are almost
certainly under a light load.  To be specific:
* The regulator is hooked through pulls to CMD0-3 and DAT.  Probably
  the CMD pulls are something like 47K and the DAT is something like
  10K.
* The card is supposed to be driving DAT0-3 low during voltage change
  which will draw _some_ current, but not a lot.
* The regulator is also provided to the SDMMC host controller, but the
  SDMMC host controller is in open drain mode during the voltage
  change and so shouldn't be drawing much current.

In order to keep the SDMMC host working properly (or for noise
reasons), there might also be a capacitor attached to the SDMMC IO
regulator.  This also will have the effect of slowing down transitions
of the regulator, especially under light loads.

From experimental evidence, we've seen the voltage change fail if the
card doesn't detect that the voltage fell to less than about 2.3V when
we turn on the clock.  On one device (that admittedly had a 47K CMD
pullup instead of a 10K CMD pullup) we saw that the voltage was just
about 2.3V after 5ms and thus the voltage change would sometimes fail.
Doubling the delay gave margin and made the voltage change work 100%
of the time, despite the slightly weaker CMD pull.

At the moment submitting this as an RFC patch since my problem _could_
be fixed by increasing the pull strength (or using a smaller
capacitor).  However being a little bit more lenient to strange
hardware could also be a good thing.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:07 +02:00
Zhangfei Gao
e6ac184bdd mmc: sdhci-st: Fix modalias to make module auto-loading work
Make the modalias match driver name, this is required to make module
auto-loading work.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
CC: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:07 +02:00
Zhangfei Gao
a7ca2b1643 mmc: dw_mmc: rockchip: Fix modalias to make module auto-loading work
Make the modalias match driver name, this is required to make module
auto-loading work.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
CC: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:06 +02:00
Zhangfei Gao
2fc546fd8e mmc: dw_mmc: exynos: Fix modalias to make module auto-loading work
Make the modalias match driver name, this is required to make module
auto-loading work.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:06 +02:00
Zhangfei Gao
7026fd663b mmc: dw_mmc: k3: Fix modalias to make module auto-loading work
Make the modalias match driver name, this is required to make module
auto-loading work.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:05 +02:00
Lars-Peter Clausen
eff8f2f5df mmc: dw_mmc: Use core to handle absent write protect line
Use the new MMC_CAP2_NO_WRITE_PROTECT to let the core handle the case where
no write protect line is present instead of having custom driver code to
handle it.

dw_mci_of_get_slot_quirks() is slightly refactored to directly modify the
mmc_host capabilities instead of returning a quirk mask.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:05 +02:00
Zhangfei Gao
0293efddad mmc: dw_mmc: k3: support hi6220
Support hi6220, tested on hikey board
emmc: support hs
sd: support hs, sdr12, sdr25

Signed-off-by: Jorge A. Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Dan Yuan <yuandan@hisilicon.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:04 +02:00
Zhangfei Gao
8f7849c4f9 mmc: dw_mmc: add switch_voltage
switch_voltage is required on some platform since special register accessing

Signed-off-by: Jorge A. Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Dan Yuan <yuandan@hisilicon.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:04 +02:00
Kuninori Morimoto
087de9ed3d mmc: cast unsigned int to typeof(sector_t) to avoid unexpected error
card->csd.capacity is defined as "unsigned int", and sector_t is defined as
"u64" or "unsigned long" (depends on CONFIG_LBDAF). Thus, sector_t data
might have strange data (see below). This patch cast it to typeof(sector_t)
Special thanks to coverity <http://www.coverity.com>

ex) if sector_t was u64

        unsigned int data;
        sector_t sector;

        data = 0x800000;
        sector = (data << 8); // 0xffffffff80000000
        sector = (((typeof(sector_t))data) << 8); // 0x80000000

or

        data = 0x80000000;
        sector = (data << 8); // 0x0
        sector = (((typeof(sector_t))data) << 8); // 0x8000000000

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:03 +02:00
Kuninori Morimoto
ded8a5f961 mmc: cast u8 to unsigned long long to avoid unexpected error
card->ext_csd.enhanced_area_offset is defined as "unsigned long long",
and, ext_csd[] is defined as u8.
unsigned long long data might have strange data if first bit of ext_csd[]
was 1. this patch cast it to (unsigned long long)
Special thanks to coverity <http://www.coverity.com>

ex)
        u8  data8;
        u64 data64;

        data8 = 0x80;
        data64 = (data8 << 24); // 0xffffffff80000000
        data64 = (((unsigned long long)data8) << 24); // 0x80000000;

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:03 +02:00