media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.
On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.
while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.
With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.
At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:
menu "Video4Linux options"
visible if VIDEO_DEV
source "drivers/media/v4l2-core/Kconfig"
endmenu
but it doesn't affect anymore the V4L core drivers.
The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:
config VIDEO_V4L2
tristate
depends on (I2C || I2C=n) && VIDEO_DEV
select RATIONAL
select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
default (I2C || I2C=n) && VIDEO_DEV
In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.
Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Do some adjustments at the per-vendor Kconfig, adding a comment at
the beginning in order to identify the manufacturer, and adjust
a few entries to make them look more uniform.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # For sunxi
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Instead of placing multiple per-vendor entries at the
platform/{Makefile,Kconfig}, create them at the per-vendor
directories.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As there are 4 manufacturer's directories with multiple sources
(qcom, rockchip, sti and sunxi), move the sources from
platform/Kconfig to their specific Konfig files.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
venus-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
camss-specific config stuff on a separate Kconfig file.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Kernel test robot reported below warning ->
drivers/media/platform/qcom/camss/camss-csid-gen2.c:407:3:
warning: Value stored to 'val' is never read
[clang-analyzer-deadcode.DeadStores]
Replace hard coded value with val.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewing the RB5 schematic its clear that we have missed out on defining
both of the power-rails associated with the CSI PHY.
Other PHYs such as the UFS, PCIe and USB connect to these rails and define
each regulator individually.
This means if we were to switch off the other various PHYs which enable
these rails, the CAMSS would not appropriately power-on the CSI PHY.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewing the RB3 schematic its clear that we have missed out on defining
one of the power-rails associated with the CSI PHY.
Other PHYs such as the UFS, PCIe and USB connect to these rails and define
each regulator individually.
This means if we were to switch off the other various PHYs which enable
these rails, the CAMSS would not appropriately power-on the CSI PHY.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add the ability to enable or disable multiple regulators in bulk with
camss. This is useful for sm8250, sdm845 and it looks like sdm660 where we
have more than one CSI regulator to do at once.
It should just work for standalone existing vdda regulators and parts which
don't have an explicitly defined CSI regulator.
[hverkuil: fix camss-csid.c:163:13: warning: 'ret' may be used uninitialized in this function]
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The HFI_PROPERTY_PARAM_VENC_HDR10_PQ_SEI HFI property is not supported
on Venus v1 and v3.
cc: stable@vger.kernel.org # 5.13+
Fixes: 9172652d72 ("media: venus: venc: Add support for CLL and Mastering display controls")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
During encoder driver open controls are initialized via a call
to v4l2_ctrl_handler_setup which returns EINVAL error for
V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM v4l2 control. The control
default value is disabled and because of firmware limitations
8x8 transform cannot be disabled for the supported HIGH and
CONSTRAINED_HIGH profiles.
To fix the issue change the control default value to enabled
(this is fine because the firmware enables 8x8 transform for
high and constrained_high profiles by default). Also, correct
the checking of profile ids in s_ctrl from hfi to v4l2 ids.
cc: stable@vger.kernel.org # 5.15+
Fixes: bfee75f73c ("media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The venus_helper_alloc_dpb_bufs() implementation allows an early return
on an error path when checking the id from ida_alloc_min() which would
not release the earlier buffer allocation.
Move the direct kfree() from the error checking of dma_alloc_attrs() to
the common fail path to ensure that allocations are released on all
error paths in this function.
Addresses-Coverity: 1494120 ("Resource leak")
cc: stable@vger.kernel.org # 5.16+
Fixes: 40d87aafee ("media: venus: vdec: decoded picture buffer handling during reconfig sequence")
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Describe missing structure members:
core.h: warning: Function parameter or member
'sys_err_done' not described in 'venus_core'
'fw_min_cnt' not described in 'venus_inst'
'flags' not described in 'venus_inst'
'dpb_ids' not described in 'venus_inst'
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
QCOM ISPs do not support having a programmable CSI Clock Lane number.
In order to accurately reflect this, the different CSIPHY HW versions
need to have their own register layer for computing lane masks.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
To prepare for usage of the v4l2_fwnode_bus_* data structures to
describe bus configuration in the subdev .get_mbus_config() operation,
rename the structures with a v4l2_mbus_config_ prefix instead of
v4l2_fwnode_bus_, and move them to v4l2_mediabus.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sm8250 CAMSS CSID depends on the VFE it is attached to being powered on
and clocked prior to taking the CSID out of reset.
It is possible to open just the CSID subdev from libcamera and attempt to
bring the CSID block up.
If we do not first bring up the VFE the CSID will fail to come out of
reset.
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Downstream makes some pretty explicit comments about voting for bus
bandwidth prior to camcc_camnoc_axi_clk_src. Working with camx downstream
also shows that the bandwidth vote is required to get that root clock
working.
Add a simple mechanism to declare set and unset named NOCs. Whereas the
objective is to enable the sm8250 specifically the code has been
implemented to allow setting of whatever NOCs different SoCs using this
driver may require.
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Titan 480 camss found on SM8250 has 6 CSIPHY and 4 VFE/CSID.
CSID is compatible with the Titan 170 CSID, but the Titan 480 CSID are
inside the VFE region (between the "top" and "bus" registers), so a
workaround is added to avoid ioremap failure.
[bod] Fixed setting camnoc_axi_clk_src instead of camcc_camnoc_axi_clk
[jgrahsl, bod] Add slow_ahb_src clock values
[jgrahsl, bod] Add cpa_ahb clock values
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Co-developed-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Julian Grahsl <jgrahsl@snap.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for VFE found on SM8250 (Titan 480). This implementation is
based on the titan 170 implementation. It supports the normal and lite VFE,
and only supports the RDI0 capture path.
[bod: Updates hw_version callback]
[bod: Use static inline for macros reusing parameters checkpatch --strict]
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
csid_isr() only checks for the reset irq, so enabling any other irqs
doesn't make sense. The "RDI irq" comment is also wrong, the register
should be CSID_CSI2_RDIN_IRQ_MASK. Without this fix there may be an
excessive amount of irqs.
Fixes: eebe6d00e9 ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A successful 'of_platform_populate()' call should be balanced by a
corresponding 'of_platform_depopulate()' call in the error handling path
of the probe, as already done in the remove function.
A successful 'venus_firmware_init()' call should be balanced by a
corresponding 'venus_firmware_deinit()' call in the error handling path
of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: f9799fcce4 ("media: venus: firmware: register separate platform_device for firmware loader")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The normal path of the function makes the assumption that
'pm_ops->core_power' may be NULL.
We should make the same assumption in the error handling path or a NULL
pointer dereference may occur.
Add the missing test before calling 'pm_ops->core_power'
Fixes: 9e8efdb578 ("media: venus: core: vote for video-mem path")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In exististing implimentation, in min_loaded_core() for low_power
vpp frequency value is considering as vpp_freq instead of low_power_freq.
Fixed this by correcting vpp frequency calculation for encoder.
Fixes: 3cfe5815ce (media: venus: Enable low power setting for encoder)
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vfe_reg_clr() is not used in camss-vfe-170.c, and can be removed.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add the SDM660 DT compatible and its resource structure in order
to support the Venus IP in SDM630, SDM636, SDM660 and SDA variants.
This SoC features Venus 4.4 (HFI3XX) with only one subcore, used
for both encoding and decoding, and switched on with one main and
one subcore dedicated GDSC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In existing implementation, driver is freeing and un-mapping all the
decoded picture buffers(DPB) as part of dynamic resolution change(DRC)
handling. As a result, when firmware try to access the DPB buffer, from
previous sequence, SMMU context fault is seen due to the buffer being
already unmapped.
With this change, driver defines ownership of each DPB buffer. If a buffer
is owned by firmware, driver would skip from un-mapping the same.
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
According to stateful decoder docs a fatal failure of decoding
(and encoding) could be recover it by closing the corresponding
file handle and open new one or reinitialize decoding (and encoding)
by stop streaming on both queues. In order to satisfy this
requirement we add a mechanism ins sys_error_handler and
corresponding decoder and encoder drivers to wait for sys_error_done
waitqueue in reqbuf.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Get the min buffer count required by FW from source event change
and use the same value to decide actual buffer count and for
buffer size calculation.
- Setup DPB and OPB buffers after session continue incase of
reconfig.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
