changing to kzalloc lets us get rid of some lines. The other concern
here is that some members of binding->ptype are still uninitialized at
the end of the function.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When hit error then we can return immediately. This makes the code
simpler and lets us remove some indenting.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If net_dev is NULL memcpy() will Oops.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking updates from David Miller:
1) BPF debugger and asm tool by Daniel Borkmann.
2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.
3) Correct reciprocal_divide and update users, from Hannes Frederic
Sowa and Daniel Borkmann.
4) Currently we only have a "set" operation for the hw timestamp socket
ioctl, add a "get" operation to match. From Ben Hutchings.
5) Add better trace events for debugging driver datapath problems, also
from Ben Hutchings.
6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we
have a small send and a previous packet is already in the qdisc or
device queue, defer until TX completion or we get more data.
7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.
8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
Borkmann.
9) Share IP header compression code between Bluetooth and IEEE802154
layers, from Jukka Rissanen.
10) Fix ipv6 router reachability probing, from Jiri Benc.
11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.
12) Support tunneling in GRO layer, from Jerry Chu.
13) Allow bonding to be configured fully using netlink, from Scott
Feldman.
14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
already get the TCI. From Atzm Watanabe.
15) New "Heavy Hitter" qdisc, from Terry Lam.
16) Significantly improve the IPSEC support in pktgen, from Fan Du.
17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom
Herbert.
18) Add Proportional Integral Enhanced packet scheduler, from Vijay
Subramanian.
19) Allow openvswitch to mmap'd netlink, from Thomas Graf.
20) Key TCP metrics blobs also by source address, not just destination
address. From Christoph Paasch.
21) Support 10G in generic phylib. From Andy Fleming.
22) Try to short-circuit GRO flow compares using device provided RX
hash, if provided. From Tom Herbert.
The wireless and netfilter folks have been busy little bees too.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
net/cxgb4: Fix referencing freed adapter
ipv6: reallocate addrconf router for ipv6 address when lo device up
fib_frontend: fix possible NULL pointer dereference
rtnetlink: remove IFLA_BOND_SLAVE definition
rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
qlcnic: update version to 5.3.55
qlcnic: Enhance logic to calculate msix vectors.
qlcnic: Refactor interrupt coalescing code for all adapters.
qlcnic: Update poll controller code path
qlcnic: Interrupt code cleanup
qlcnic: Enhance Tx timeout debugging.
qlcnic: Use bool for rx_mac_learn.
bonding: fix u64 division
rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
sfc: Use the correct maximum TX DMA ring size for SFC9100
Add Shradha Shah as the sfc driver maintainer.
net/vxlan: Share RX skb de-marking and checksum checks with ovs
tulip: cleanup by using ARRAY_SIZE()
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
net/cxgb4: Don't retrieve stats during recovery
...
Here's the big USB pull request for 3.14-rc1
Lots of little things all over the place, and the usual USB gadget
updates, and XHCI fixes (some for an issue reported by a lot of people.)
USB PHY updates as well as chipidea updates and fixes.
All of these have been in the linux-next tree with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlLdjwIACgkQMUfUDdst+ylBIQCgkRoR8lJc0L5lZ3fugIJL4IzZ
j6AAn0nBLP6VI0cvUEi3TcrPTzv4MEuL
=Yb+I
-----END PGP SIGNATURE-----
Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB pull request for 3.14-rc1
Lots of little things all over the place, and the usual USB gadget
updates, and XHCI fixes (some for an issue reported by a lot of
people). USB PHY updates as well as chipidea updates and fixes.
All of these have been in the linux-next tree with no reported issues"
* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
usb: chipidea: need to mask INT_STATUS when write otgsc
usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
usb: chipidea: add freescale imx28 special write register method
usb: ehci: add freescale imx28 special write register method
usb: core: check for valid id_table when using the RefId feature
usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
usb: core: bail out if user gives an unknown RefId when using new_id
usb: core: allow a reference device for new_id
usb: core: add sanity checks when using bInterfaceClass with new_id
USB: image: correct spelling mistake in comment
USB: c67x00: correct spelling mistakes in comments
usb: delete non-required instances of include <linux/init.h>
usb:hub set hub->change_bits when over-current happens
Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
xhci: Set scatter-gather limit to avoid failed block writes.
xhci: Avoid infinite loop when sg urb requires too many trbs
usb: gadget: remove unused variable in gr_queue_int()
...
Use possibly more efficient ether_addr_equal
instead of memcmp.
Cc: Rupesh Gujare <rupesh.gujare@atmel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Individual controller driver has different requirement for wakeup
setting, so move it from core to itself. In order to align with
current etting the default wakeup setting is enabled (except for
chipidea host).
Pass compile test with below commands:
make O=outout/all allmodconfig
make -j$CPU_NUM O=outout/all drivers/usb
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This pulls in all of the staging patches applied during the opw
application process, and some other staging patches that were submitted
during that period of time. All of these are for 3.14-rc1.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of the needless __GFP_ZERO flag for kzalloc() at oz_elt_stream_create().
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the following warning reported by checkpatch.pl
WARNING: space prohibited before semicolon
drivers/staging/ozwpan/ozproto.c
Signed-off-by: Matina Maria Trompouki <mtrompou@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to check "count" so we don't overflow the ei->data buffer.
Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Return error if we receive write(), while PD is not connected.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Incorrect error number was returned here (EPERM), ENXIO is more
appropriate.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Buffer depth of 50 units is not sufficient when there is considerable delay
occuring on air due to interference, increase ISOC IN buffer depth to 100 units.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reset PORT_ENABLE bit of port status on loosing PD.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure that we return negative value if oz_build_frame()
returns NULL.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have icreased interrupt end point buffer size to 512 bytes,
Change variable data type to accomodate it.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase interrupt end point buffer size & convert hard coded
value to macro for better readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use macro instead of hard coded value for readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for valid config number before completing set interface.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we are initialising structure, we do not require
memset().
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we call oz_pd_destroy() from softirq context, where we
try to destroy relevant data structures, as well we kill a tasklet
which always result in following kernel warning.
[12279.262194] Attempt to kill tasklet from interrupt
[12279.262202] Attempt to kill tasklet from interrupt
This patch defers deallocation of data structures to work queue.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increment PD reference counter, on every timer event so that
we do not loose PD object by mistake.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check if interface number is correct before creating an end point.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not allocate a port to new device or process URB when its status is
yet to be read. This avoids race condition when USB core read hub
status a bit late, while new device tries to acquire port.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should not use extra variable just to copy pointer value,
renaming parameter name serves pupose & removes extra variable.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are assigning value to hport before returning, there is
no need to initialize it.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch separates success & failure block along with fixing
following issues:-
1. The way oz_hcd_pd_arrived() looks now it's easy to think we free "ep" but
actually we do this spaghetti thing of setting it to NULL on success.
2. It is hard to read it because there are unlocks scattered throughout.
3. Currently we set "ep" to NULL on the success path and then test it and or
free it. In current code you have to scroll to the start of the function
to read code.
Original patch was submitted by Dan here :-
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2013-August/040113.html
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Swap arguments of oz_ep_alloc() to match kmalloc() for better readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove variable initialization wherever it is not required.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are already checking "ep" earlier in function. Do not
need to check again.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put spaces around math operations.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a blank line between global declarations &
functions for readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds blank line between declaration &
code for readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a bug where we were not returning correct hub status
for 8th port.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure that we reset port configuration no. when PD departs.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix following issues reported by Dan:-
1) There is no check limiting the size to 32 and it could be up to
253 bytes.
2) Use defines instead of magic numbers.
3) The oz_farewell struct is supposed to be a variable length struct
but the variable part is put in the middle. It doesn't make any
sense to put the length of the variable size array after then end
of the array because we can never find it again! Put the
variable size array at the end. Make it a zero length array.
u8 len;
u8 report[0];
4) In oz_add_farewell() we do this:
f = kmalloc(sizeof(struct oz_farewell) + len - 1, GFP_ATOMIC);
The "- 1" refers to sizeof(f->report) but because it was a magic
number then it was missed when the sizeof(f->report) changed.
5) In [patch 6/6] we set the ->len member. But because it is at the
end of a variable length array with no limit check the remote
attacker can just rewrite it using the memcpy() on the next line.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following build warning.
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30aadd): undefined reference to `__divdi3'
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30ac85): undefined reference to `__divdi3'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a bug where we were not setting length field causing wrong
report size to be copied.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Farewell report size can be bigger than one byte, increase array
size to accomodate maximum 32 bytes of farewell report.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
