The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for the panel-simple driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-5-digetx@gmail.com
The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for the generic LVDS panel.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-4-digetx@gmail.com
This reads the DT setting for the panel rotation to set the panel
orientation in the get_modes callback.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
Feixin K101-IM2BYL02 is a new panel by Feixin designed as a replacement
to their K101-IM2BA02 panel. This panel utilizes the Ilitek ILI9881C
controller.
Add this panel's initialzation sequence and timing to ILI9881C driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719171007.276383-2-icenowy@aosc.io
There're more panels with ILI9881C controller than the Bananapi one
supported by this driver.
Extract the mode and init sequence part, to prepare the driver for
adding new panels.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719170411.275812-2-icenowy@aosc.io
Convert the Sharp LS020B1DD01D panel entry from using a struct
display_timing to using a struct drm_display_mode, as display_timing
seems to be the old and legacy format.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-4-paul@crapouillou.net
If you pass a string that is not terminated with a carriage return to
dev_err(), it will eventually be printed with a carriage return, but
not right away, since the kernel will wait for a pr_cont().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-3-paul@crapouillou.net
Instead of manipulating the backlight directly in this driver, register
it in the probe using drm_panel_of_backlight() and let the drm_panel
framework code handle it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-2-paul@crapouillou.net
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
In order to successfully read ID of the MTP panel the
panel MTP control page must be unlocked. Previously
this wasn't encountered because in the setup with this
panel the power wasn't ever really dropped. When power
gets dropped from the panel, MTP needs to be unlocked.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808224322.1507713-1-linus.walleij@linaro.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8nLmkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGBEkH/RJAnEan4gcdkBDf
2xS0yk4XLMjKZwbz61VSeKMUBkGCsh1cWsaAtJJAIVYj/6o/7mld01sZCnOASLnJ
ET0nXL2NiT/f+prYkTE5qeYH225/Yfh5jgmrqZtx/uXFCwgE5Nzi3f72IXQDmCR+
kmpNhNox3YqQTKXhv7DXobDKcO0n8nZavnhxmA9SBZn2h9RHvmvJghD0UOfLjMpA
1SbknaE67n5JN/JjI6TkYWk4nuJmqfvmBL5IYVDEZYO4UlM5Bqzhw0XN7Ax70K3M
KRK/eiqRmNwun5MxWnbzQU7t7iTgVmzjHLTpWGcM3V4blgGXC3uhjc+p/R8KTQUE
bIydSzs=
=fDeo
-----END PGP SIGNATURE-----
Merge tag 'v5.8' into drm-next
I need to backmerge 5.8 as I've got a bunch of fixes sitting
on an rc7 base that I want to land.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The function "int drm_panel_add(struct drm_panel *panel)"
always returns 0, this return value is meaningless.
Also, there is no need to check return value which calls
"drm_panel_add and", error branch code will never run.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
All panels shall report a connector type.
panel-simple has a lot of panels with no connector_type,
and for these fall back to DPI as the default.
v2:
- Rebased on top of validation of panel description
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-3-sam@ravnborg.org
Warn if we detect a panel with incomplete/wrong description.
This is inspired by a similar patch by Laurent that introduced checks
for LVDS panels - this extends the checks to the remaining type of
connectors.
This is known to warn for some of the existing panels but added
despite this as we need help from people using the panels to
add the missing info.
The checks are not complete but will catch the most common mistakes.
The checks at the same time serve as documentation for the minimum
required description for a panel.
The checks uses dev_warn() as we know this will hit. WARN() was
too noisy at the moment for anything else than LVDS.
v3:
- %d => %u for bpc (Laurent)
v2:
- Use dev_warn (Laurent)
- Check for empty bus_flags
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-2-sam@ravnborg.org
The boe,hv070wsa-100 panel is a LVDS panel.
Fix connector type to reflect this.
With this change users of this panel do not have to specify the
connector type.
v4:
- Add .bpc = 4 (Laurent)
v3:
- Drop PIXDATA bus_flag, not relevant
v2:
- Add .bus_format (Laurent)
- Add .bus_flags
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703192417.372164-2-sam@ravnborg.org
On boe_nv133fhm_n62 (and presumably on boe_nv133fhm_n61) a scope shows
a small spike on the HPD line right when you power the panel on. The
picture looks something like this:
+--------------------------------------
|
|
|
Power ---+
+---
|
++ |
+----+| |
HPD -----+ +---------------------------+
So right when power is applied there's a little bump in HPD and then
there's small spike right before it goes low. The total time of the
little bump plus the spike was measured on one panel as being 8 ms
long. The total time for the HPD to go high on the same panel was
51.2 ms, though the datasheet only promises it is < 200 ms.
When asked about this glitch, BOE indicated that it was expected and
persisted until the TCON has been initialized.
If this was a real hotpluggable DP panel then this wouldn't matter a
whole lot. We'd debounce the HPD signal for a really long time and so
the little blip wouldn't hurt. However, this is not a hotpluggable DP
panel and the the debouncing logic isn't needed and just shows down
the time needed to get the display working. This is why the code in
panel_simple_prepare() doesn't do debouncing and just waits for HPD to
go high once. Unfortunately if we get unlucky and happen to poll the
HPD line right at the spike we can try talking to the panel before
it's ready.
Let's handle this situation by putting in a 15 ms prepare delay and
decreasing the "hpd absent delay" by 15 ms. That means:
* If you don't have HPD hooked up at all you've still got the
hardcoded 200 ms delay.
* If you've got HPD hooked up you will always wait at least 15 ms
before checking HPD. The only case where this could be bad is if
the panel is sharing a voltage rail with something else in the
system and was already turned on long before the panel came up. In
such a case we'll be delaying 15 ms for no reason, but it's not a
huge delay and I don't see any other good solution to handle that
case.
Even though the delay was measured as 8 ms, 15 ms was chosen to give a
bit of margin.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716132120.1.I01e738cd469b61fc9b28b3ef1c6541a4f48b11bf@changeid
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge v5.8-rc6 into drm-next
I've got a silent conflict + two trees based on fixes to merge.
Fixes a silent merge with amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
The FRD350H54004 panel was marked as having active-high VSYNC and HSYNC
signals, which sorts-of worked, but resulted in the picture fading out
under certain circumstances.
Fix this issue by marking VSYNC and HSYNC signals active-low.
v2: Rebase on drm-misc-next
Fixes: 7b6bd84336 ("drm/panel: simple: Add support for the Frida FRD350H54004 panel")
Cc: stable@vger.kernel.org # v5.5
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-1-paul@crapouillou.net
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709184755.24798-1-grandmaster@al2klimov.de
The reset pin is inverted, so if we don't assert reset, the actual gpio
will be high and may keep driving the IO port of the panel.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-12-megous@megous.com
The datasheet suggests to issue sleep in after display off
as a part of the panel's shutdown sequence.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-11-megous@megous.com
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in
PinePhone. Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-10-megous@megous.com
Calling sleep out and display on is a controller specific part
of the initialization process. Move it out of the panel specific
initialization function to the enable callback.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-9-megous@megous.com
It's better than having it spread around the driver.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-8-megous@megous.com
Parametrize the driver so that it can support more panels based
on st7703 controller.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-7-megous@megous.com
This is done so that code that's not specific to a particular
jh057n panel is named after the controller. Functions specific
to the panel are kept named after the panel.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-6-megous@megous.com
This rename is done so that the driver matches the name of the
display controller and in preparation for adding support for more
panels to the driver.
This is just a basic file rename, with no code changes.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-5-megous@megous.com
Replace all uses of the legacy drm_bus_flags with their relevant
_SAMPLE_ variant.
This is a 1:1 replacement, no effort was made to validate the actual
bus flags for the panels.
Note:
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE
DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-6-sam@ravnborg.org
Drop use of the legacy drm_bus_flags member and use the more descriptive
_SAMPLE_ variant.
No functional change.
Note:
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-5-sam@ravnborg.org
Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus
formats are valid for LVDS panels. Warn at probe time to catch the
common mistake of using an incorrect format, as well as discrepancies
between the bus format and the reported bpc.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-5-laurent.pinchart+renesas@ideasonboard.com
The DRM bus flags reporting on which clock edge the pixel data and sync
signals are sampled or driven don't make sense for LVDS panels, as the
bus then uses sub-clock timings to send data. Drop those flags and add a
warning in the probe function to make sure the mistake won't be
repeated.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-4-laurent.pinchart+renesas@ideasonboard.com
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the
MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the
correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-3-laurent.pinchart+renesas@ideasonboard.com
A few of the new panels create a local macro wrapping around
mipi_dsi_dcs_write. At the same time, they don't really care about the
command/payload split.
mipi_dsi_dcs_write does a kmalloc/memcpy/kfree for payload > 7 bytes.
Avoid that all together by using the _buffer function.
Aside:
panel-xinpeng-xpp055c272.c calls its wrapper "generic" although it
should be "dcs". But that for another day/patch.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-2-emil.l.velikov@gmail.com
This patch adds missing BUS fields to the display panel descriptions of
the panels which are found on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. Innolux N156BGE L21
6. Samsung LTN101NT05
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-3-digetx@gmail.com
The EDT ET057090DHU panel has a DPI connector and not LVDS. This patch
corrects the panel's description.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: 94f07917eb ("drm/panel-simple: Add missing connector type for some panels")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-2-digetx@gmail.com
Add support for the CDTech Electronics displays S070PWS19HP-FC21
(7.0" WSVGA) and S070SWV29HG-DC44 (7.0" WVGA) to panel-simple.
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612072219.13669-4-matthias.schiffer@ew.tq-group.com
The LogicPD Type28 display used by several Logic PD products has not
worked since v5.6.
The connector type for the LogicPD Type 28 display is missing and
drm_panel_bridge_add() requires connector type to be set.
Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: 0d35408afb ("drm/panel: simple: Add Logic PD Type 28 display support")
Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200615131934.12440-1-aford173@gmail.com
The DRM panel bridge core requires connector type to be set up properly,
otherwise it rejects the panel. The missing connector type problem popped
up while I was trying to wrap CLAA070WP03XG panel into a DRM bridge in
order to test whether panel's rotation property work properly using
panel-simple driver on NVIDIA Tegra30 Nexus 7 tablet device, which uses
CLAA070WP03XG display panel.
The NVIDIA Tegra DRM driver recently gained DRM bridges support for the
RGB output and now driver wraps directly-connected panels into DRM bridge.
Hence all panels should have connector type set properly now, otherwise
the panel's wrapping fails.
This patch adds missing connector types for the LVDS panels that are found
on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. EDT ET057090DHU
6. Innolux N156BGE L21
7. Samsung LTN101NT05
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617222703.17080-8-digetx@gmail.com
It's not necessary to unregister backlight device which
registered with devm_backlight_device_register().
Fixes: 12a6cbd4f3 ("drm/panel: otm8009a: Use new backlight API")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200618134650.44311-1-weiyongjun1@huawei.com
This patch adds support for Kaohsiung Opto-Electronics Inc.
10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface.
The panel has dual LVDS channels.
My panel is manufactured by US Micro Products(USMP). There is a tag at
the back of the panel, which indicates the panel type is 'TX26D202VM0BWA'
and it's made by KOE in Taiwan.
The panel spec from USMP can be found at:
https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192120NDU-A0.pdf
The below panel spec from KOE is basically the same to the one from USMP.
However, the panel type 'TX26D202VM0BAA' is a little bit different.
It looks that the two types of panel are compatible with each other.
http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1590991880-24273-1-git-send-email-victor.liu@nxp.com
None of the DSI panels set the connector_type in their panel_desc
descriptor. As they are all guaranteed to be DSI panels, that's an easy
fix, set the connector type to DRM_MODE_CONNECTOR_DSI.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602171240.2785-1-laurent.pinchart+renesas@ideasonboard.com
People use panel-simple when they have panels that are builtin to
their device. In these cases the HPD (Hot Plug Detect) signal isn't
really used for hotplugging devices but instead is used for power
sequencing. Panel timing diagrams (especially for eDP panels) usually
have the HPD signal in them and it acts as an indicator that the panel
is ready for us to talk to it.
Sometimes the HPD signal is hooked up to a normal GPIO on a system.
In this case we need to poll it in the correct place to know that the
panel is ready for us. In some system designs the right place for
this is panel-simple.
When adding this support, we'll account for the case that there might
be a circular dependency between panel-simple and the provider of the
GPIO. The case this was designed for was for the "ti-sn65dsi86"
bridge chip. If HPD is hooked up to one of the GPIOs provided by the
bridge chip then in our probe function we'll always get back
-EPROBE_DEFER. Let's handle this by allowing this GPIO to show up
late if we saw -EPROBE_DEFER during probe. NOTE: since the
gpio_get_optional() is used, if the "hpd-gpios" isn't there our
variable will just be NULL and we won't do anything in prepare().
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.3.I53fed5b501a31e7a7fa13268ebcdd6b77bd0cadd@changeid
All info I could find about this panel show that it behaves the same
as the BOE NV133FHM-N61. However, it definitely appears to be a
unique panel because reading the EDID shows "NV133FHM-N62". We'll add
a string match for the new panel but until we find something unique
about it we'll just point at the N61's structures.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.3.I525ebd471f5340a6a369af7bde06ef04174d2f41@changeid
The BOE NV133FHM-N61 is documented in the original commit to be a
13.3" panel, but the size listed in our struct doesn't match.
Specifically:
math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92
Searching around on the Internet shows that the size that was in the
structure was the "Outline Size", not the "Display Area". Let's fix
it.
Also the Internet says that this panel supports 262K colors. That's
6bpp, not 8bpp.
Fixes: b0c664cc80 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.1.I4d29651c0837b4095fb4951253f44036a371732f@changeid
This adds support for TMP5P5 NT35596 1080x1920 video
mode panel that can be found on some Asus Zenfone 2
Laser (Z00T) devices.
This panel seems to only be found in this device
and we have no straightforward way of actually
getting the correct model number, as no schematics
are released publicly.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20200506210957.344590-2-konradybcio@gmail.com
fix boe_tv105wum_nw0 display shift.
Signed-off-by: David Lu <david.lu@bitland.com.cn>
Fixes: 963518c124 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel")
Cc: David Lu <david.lu@bitland.com.cn>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag]
Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn
The AUO G101EVN010 is a 18-bit LVDS panel, not a parallel panel, as
indicated by the current bus_format.
Fix the bus_format to MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, and also set the
connector_type to LVDS.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[updated patch subject]
Link: https://patchwork.freedesktop.org/patch/msgid/20200417114043.25381-1-tomi.valkeinen@ti.com
drivers/gpu/drm/panel/panel-truly-nt35597.c:493:31: warning: variable ‘config’ set but not used [-Wunused-but-set-variable]
const struct nt35597_config *config;
^~~~~~
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417101401.19388-1-yuehaibing@huawei.com
The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants
with essentially the same name, LTK050H3146W and LTK050H3146W-A2.
They differ in their init sequence and mode details.
changes in v2:
- add display variants
changes in v3:
- fixed indentation and artifacts found by Sam
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408085317.2624599-2-heiko@sntech.de
The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.
Someone tell me which (if either) of the dotclock or vreresh is
correct?
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-6-ville.syrjala@linux.intel.com
Tested-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
The KR070PE2T is a 7" panel with a resolution of 800x480.
KR070PE2T is the marking present on the ribbon cable. As this panel is
probably available under different brands, this marking will catch
most devices.
As I can't find a datasheet for this panel, the bus_flags are instead
from trial-and-error. The flags seem to be common for these kind of
panels as well.
Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200320112205.7100-3-dev@pascalroeleven.nl
The "data-mapping" property may not be the best way to describe the
interface between panels and display interfaces.
Drop use of in the panel-simple driver, so we have time to find
the right way to describe this interface.
Fixes: 4a1d0dbc83 ("drm/panel: simple: add panel-dpi support")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314153047.2486-3-sam@ravnborg.org
The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.
Someone tell me which (if either) of the dotclock or vreresh is
correct?
Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-22-ville.syrjala@linux.intel.com
Reviewed-by: Adam Ford <aford173@gmail.com>
The currently listed dotclocks disagree with the currently
listed vrefresh rates. Change the dotclocks to match the vrefresh.
Someone tell me which (if either) of the dotclock or vreresh is
correct?
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-9-ville.syrjala@linux.intel.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.
Someone tell me which (if either) of the dotclock or vreresh is
correct?
Cc: Heiko Schocher <hs@denx.de>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-7-ville.syrjala@linux.intel.com
Reviewed-by: Heiko Schocher <hs@denx.de>
The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.
There are two variants of the COM37H3M panel.
The older one's COM37H3M05DTC data sheet specifies:
MIN TYP MAX
CLK frequency fCLK -- 22.4 26.3 MHz (in VGA mode)
VSYNC Frequency fVSYNC 54 60 66 Hz
VSYNC cycle time tv -- 650 -- H
HSYNC frequency fHSYNC -- 39.3 -- kHz
HSYNC cycle time th -- 570 -- CLK
The newer one's COM37H3M99DTC data sheet says:
MIN TYP MAX
CLK frequency fCLK 18 19.8 27 MHz
VSYNC Frequency fVSYNC 54 60 66 Hz
VSYNC cycle time tv 646 650 700 H
HSYNC frequency fHSYNC -- 39.0 50.0 kHz
HSYNC cycle time th 504 508 630 CLK
So we choose a parameter set that lies within the specs
of both variants. We start at .vrefresh = 60,
choose .htotal = 570 and .vtotal = 650 and end up
in a clock of 22.230 MHz.
Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e63a0533ad5b5142373437ef758aedbdb716152d.1583826198.git.hns@goldelico.com
This reverts commit 0f9cdd743f.
The interface of the panel is LVDS, not parallel.
The color depth is RGB888, not RGB565.
The panel has additional features, making it not so simple.
The only user (upstream) of this panel is appropriately using panel-lvds.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305130536.26011-1-peda@axentia.se
Panel driver for the KD35T133 display from Elida, used for example
in the rk3326-based Odroid Go Advance handheld.
changes in v3:
- add missing return value assignment (Francesco)
- re-sort header includes (Sam)
changes in v2:
- rename dsi_generic_write_seq macro to dsi_dcs_write_seq to honor
the underlying mipi_dsi_dcs_write (Robin)
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229151506.750242-3-heiko@sntech.de
The panel-dpi compatible is a fallback that
allows the DT to specify the timing.
When matching panel-dpi expect the device tree to include the
timing information for the display-panel.
Background for this change:
There are a lot of panels and new models hits the market very often.
It is a lost cause trying to chase them all and users of new panels
will often find them in situations that the panel they ues are not
supported by the kernel.
On top of this a lot of panels are customized based on customer
specifications.
Including the panel timing in the device tree allows for a simple
way to describe the actual HW and use this description in a generic
way in the kernel.
This allows uses of proprietary panels, or panels which are not
included in the kernel, to specify the timing in the device tree
together with all the other HW descriptions.
And thus, using the device tree it is then easy to add support
for an otherwise unknown panel.
The current support expect panels that do not require any
delays for prepare/enable/disable/unprepare.
Oleksandr Suvorov replied:
I've just tested this patch on Apalis iMX6Q and Colibri iMX7D using
panel settings from the following patch:
https://lore.kernel.org/linux-arm-kernel/20200115123401.2264293-4-oleksandr.suvorov@toradex.com/
It works for me, thanks!
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Tested-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216181513.28109-6-sam@ravnborg.org
This adds a driver for panels based on the Novatek NT35510
display driver IC, such as the Hydis HVA40WV1 panel found
in the Samsung GT-S7710.
The NT35510 can be used with both internal and external
backlight (such as GPIO backlight) so we support both:
if no external backlight is found, we register a subdriver
for the internal backlight.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200223121841.26836-3-linus.walleij@linaro.org
The panel datasheet says that the panel samples at falling edge, but
does not say anything about h/v sync signals. Testing shows that if the
sync signals are driven on falling edge, the picture on the panel will
be slightly shifted right.
Setting sync drive edge to the same as data drive edge fixes this issue.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114093950.4101-4-tomi.valkeinen@ti.com
The lt089ac29000 panel is an LVDS panel, not a DPI one. Fix the
definition to reflect this fact.
v10:
* Add changelog to the commit message
v8 -> v9:
* No changes
v7:
* New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-12-boris.brezillon@collabora.com
EDT ET043080DH6-GP is a 4.3" WQVGA 480x272 RGB LCD panel used on the iWave
Generic SODIMM Development Platform.
Changes in v2:
-added mandatory .connector_type field
-changed the .bus_format MEDIA_BUS_FMT_RGB666_1X18
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1580386118-22895-3-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com
The datasheet suggests 60 for tHFP, so let's adjust the number
accordingly.
This also makes the framerate be 60Hz as intended:
159916.0 * 1000 / ((1200 + 80 + 24 + 60)*(1920 + 20 + 4 + 10))
=> 60.00 Hz
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Fixes: e6d020eeef ("drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel")
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added fixes tag]
Link: https://patchwork.freedesktop.org/patch/msgid/20200125050256.107404-1-drinkcat@chromium.org
Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-6-jitao.shi@mediatek.com
Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-5-jitao.shi@mediatek.com
Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
The FRD350H54004 is a simple 3.5" 320x240 24-bit TFT panel, found for
instance inside the Anbernic RG-350 handheld gaming console.
v2: Order alphabetically
v3: Add connector_type, and update timings according to the constraints
listed in the datasheet
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113161741.32061-3-paul@crapouillou.net
With gcc -O3 in combination with the structleak plug, the compiler can
inline very aggressively, leading to rather large stack usage:
drivers/gpu/drm/panel/panel-tpo-td028ttec1.c: In function 'td028ttec1_prepare':
drivers/gpu/drm/panel/panel-tpo-td028ttec1.c:233:1: error: the frame size of 2768 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
}
Marking jbt_reg_write_*() as noinline avoids the case where
multiple instances of this function get inlined into the same
stack frame and each one adds a copy of 'tx_buf'.
The compiler is clearly making some bad decisions here, but I
did not open a new bug report as this only happens in combination
with the structleak plugin.
This fixes mmtom ("init/Kconfig: enable -O3 for all arches")
Link: https://lore.kernel.org/lkml/CAK8P3a3jAnFZA3GFRtdYdg1-i-oih3pOQzkkrK-X3BGsFrMiZQ@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fix indent]
Link: https://patchwork.freedesktop.org/patch/msgid/20200108135116.3687988-1-arnd@arndb.de
The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org
The LTK500HD1829 is 5.5" DSI display.
v5:
- Fix some trivial checkpatch warnings while applying (sam)
changes in v4:
- drop error message if backlight not found, no other panel
does that and if needed it should live in drm_panel_of_backlight
changes in v3:
- drop one more overlooked panel->drm access
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112641.30647-3-heiko@sntech.de
Base on the somewhat similar Rocktech driver but adapted for
panel-specific init of the XPP055C272.
changes in v5:
- drop error message when backlight not found, no other panel
does that and if needed it should live in drm_panel_of_backlight
changes in v4:
none
changes in v3:
- remove wrong negative sync flags from display-mode to fix a display
artifact of the output getting move a tiny bit to the right
changes in v2:
- move to drm-panel-internal backlight handling (Sam)
- adapt to changes that happened to drm_panel structs+functions (Sam)
- sort includes (Sam)
- drop unnecessary DRV_NAME constant (Sam)
- do mipi_dsi_dcs_exit_sleep_mode and mipi_dsi_dcs_set_display_on
in panel prepare (not init_sequence) to keep symmetric (Sam)
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112907.30758-3-heiko@sntech.de
Declare the temp variable as __be16 to address the following sparse
warning:
drivers/gpu/drm/panel/panel-lg-lg4573.c:45:20: warning: incorrect type in initializer (different base types)
drivers/gpu/drm/panel/panel-lg-lg4573.c:45:20: expected unsigned short [unsigned] [usertype] temp
drivers/gpu/drm/panel/panel-lg-lg4573.c:45:20: got restricted __be16 [usertype] <noident>
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230195609.12386-1-wambui.karugax@gmail.com
Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
V11:
- Use the backlight support in drm_panel to simplify the driver (Sam)
V10:
- Adjust init code, make the format more concise (Emil)
V9:
- kill off default_off_cmds (Emil)
- use mipi_dsi_dcs_set_display_{on,off} in their enable/disable
callbacks. (Emil)
- Adjusting the delay function (Emil)
V8:
- modify PARENTHESIS_ALIGNMENT format (Sam)
- use gpios are required API replace optional gpio API (Emil)
V7:
- Modify communication address
V6:
- Add the information of the reviewer
- Remove unnecessary delays, The udelay_range code gracefully returns
without hitting the scheduler on a delay of 0. (Derek)
- Merge the same data structures, like display_mode and off_cmds (Derek)
- Optimize the processing of results returned by
devm_gpiod_get_optional (Derek)
V5:
- Add the information of the reviewer (Sam)
- Delete unnecessary header files #include <linux/fb.h> (Sam)
- The config DRM_PANEL_BOE_HIMAX8279D appears twice. Drop one of them (Sam)
- ADD static, set_gpios function is not used outside this module (Sam)
V4:
- Frefix all function maes with boe_ (Sam)
- Fsed "enable_gpio" replace "reset_gpio", Make it look clearer (Sam)
- Sort include lines alphabetically (Sam)
- Fixed entries in the makefile must be sorted alphabetically (Sam)
- Add send_mipi_cmds function to avoid duplicating the code (Sam)
- Add the necessary delay(reset_delay_t5) between reset and sending
the initialization command (Rock wang)
V3:
- Remove unnecessary delays in sending initialization commands (Jitao Shi)
V2:
- Use SPDX identifier (Sam)
- Use necessary header files replace drmP.h (Sam)
- Delete unnecessary header files #include <linux/err.h> (Sam)
- Specifies a GPIOs array to control the reset timing,
instead of reading "dsi-reset-sequence" data from DTS (Sam)
- Delete backlight_disable() function when already disabled (Sam)
- Use devm_of_find_backlight() replace of_find_backlight_by_node() (Sam)
- Move the necessary data in the DTS to the current file,
like porch, display_mode and Init code etc. (Sam)
- Add compatible device "boe,himax8279d10p" (Sam)
V1:
- Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
Signed-off-by: Jerry Han <jerry.han.hq@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Rock wang <rock_wang@himax.com.cn>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed boe_panel_get_modes + backlight]
Link: https://patchwork.freedesktop.org/patch/msgid/20191212115208.3878-1-jerry.han.hq@gmail.com
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-26-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-25-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-24-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-23-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-22-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-21-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-20-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-19-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver.
While touching the include files sort them
and divide them up in blocks.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-18-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-17-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-16-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-15-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-14-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-13-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-12-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-11-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-10-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-9-sam@ravnborg.org
The panel drivers used drm_panel.drm for two purposes:
1) Argument to drm_mode_duplicate()
2) drm->dev was used in error messages
The first usage is replaced with drm_connector.dev
- drm_connector is already connected to a drm_device
and we have a valid connector
The second usage is replaced with drm_panel.dev
- this makes drivers more consistent in their dev argument
used for dev_err() and friends
With these replacements there are no more uses of drm_panel.drm,
so it is removed from struct drm_panel.
With this change drm_panel_attach() and drm_panel_detach()
no longer have any use as they are empty functions.
v2:
- editorial correction in changelog (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org
Today the bridge creates the drm_connector, but that is planned
to be moved to the display drivers.
To facilitate this, update drm_panel_funcs.get_modes() to
take drm_connector as an argument.
All panel drivers implementing get_modes() are updated.
v2:
- drop accidental change (Laurent)
- update docs for get_modes (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-6-sam@ravnborg.org
Use drm_panel infrastructure for backlight.
Replace direct calls with drm_panel_*() calls
to utilize the drm_panel support.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-4-sam@ravnborg.org
Previously, there was an omap panel-dpi driver that would
read generic timings from the device tree and set the display
timing accordingly. This driver was removed so the screen
no longer functions. This patch modifies the panel-simple
file to setup the timings to the same values previously used.
Fixes: 8bf4b16211 ("drm/omap: Remove panel-dpi driver")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016135147.7743-1-aford173@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl2su/AeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvm4H/1jkheCrvB/GJS69
wd18vizAg+eFmNCzxlGVhpQTKGymNRy+g6clnoli3cNJ3pSVKcYgVyB3oXaONIhp
g/ANudnBjTdjqYgJzfLij5AGecrGwDpF3YL0kuKrCB63s2I/HwQGYy/aPrYY8emy
gAYdaf1DGRu5/DIIB6soTo/TnpKoAyTE+XY5MaPSug++t/Flov19tlU40IZxXW94
bjTXbm0yklrsIx+LL5mYYGGnygSTCF66JjFg1qhDCBQaS2MZ21h1ZgaOtGZTwZcc
WgEiqLC5S1Iyj96zir1t78RcVQ4RzgvDbhUOgIqUFsYAO2wOicvxyFE3Hj8rPOKd
uGgVPRM=
=xgZa
-----END PGP SIGNATURE-----
Merge v5.4-rc4 into drm-next
Thierry needs fd70c7755b ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.
Some adjacent changes conflicts, plus some clashes in i915 due to
cherry-picking and git trying to be helpful and leaving both versions
in.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The panel-tpo-td043mtea1 driver incorrectly includes the OF vendor
prefix in its SPI alias. Fix it, and move the manual alias to an SPI
module device table.
Fixes: dc2e1e5b27 ("drm/panel: Add driver for the Toppoly TD043MTEA1 panel")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-6-laurent.pinchart@ideasonboard.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
The panel-tpo-td028ttec1 driver incorrectly includes the OF vendor
prefix in its SPI alias. Fix it.
Fixes: 415b8dd087 ("drm/panel: Add driver for the Toppoly TD028TTEC1 panel")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-5-laurent.pinchart@ideasonboard.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Andreas Kemnade <andreas@kemnade.info>
The panel-sony-acx565akm driver incorrectly includes the OF vendor
prefix in its SPI alias. Fix it, and move the manual alias to an SPI
module device table.
Fixes: 1c8fc3f0c5 ("drm/panel: Add driver for the Sony ACX565AKM panel")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-4-laurent.pinchart@ideasonboard.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The panel-nec-nl8048hl11 driver incorrectly includes the OF vendor
prefix in its SPI alias. Fix it, and move the manual alias to an SPI
module device table.
Fixes: df439abe65 ("drm/panel: Add driver for the NEC NL8048HL11 panel")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-3-laurent.pinchart@ideasonboard.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The panel-lg-lb035q02 driver incorrectly includes the OF vendor prefix
in its SPI alias. Fix it, and move the manual alias to an SPI module
device table.
Fixes: f5b0c65424 ("drm/panel: Add driver for the LG Philips LB035Q02 panel")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-2-laurent.pinchart@ideasonboard.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The "lvds->backlight" pointer could be NULL in situations where
of_parse_phandle() returns NULL. This code is cleaner if we use the
managed devm_of_find_backlight() so the clean up is automatic.
Fixes: 7c9dff5bd6 ("drm: panels: Add LVDS panel driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911104928.GA15930@mwanda
Add a type field to the drm_panel structure to report the panel type,
using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS,
eDP, DSI and DPI). This will be used to initialise the corresponding
connector type.
Update all panel drivers accordingly. The panel-simple driver only
specifies the type for the known to be LVDS panels, while all other
panels are left as unknown and will be converted on a case-by-case
basis as they all need to be carefully reviewed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-2-laurent.pinchart@ideasonboard.com
Instead of requiring all drivers to set the dev and funcs fields of
drm_panel manually after calling drm_panel_init(), pass the data as
arguments to the function. This simplifies the panel drivers, and will
help future refactoring when adding new arguments to drm_panel_init().
The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection to verify that no call to
drm_panel_init() with a single argument still exists.
@@
expression panel;
expression device;
identifier ops;
@@
drm_panel_init(&panel
+ , device, &ops
);
...
(
-panel.dev = device;
-panel.funcs = &ops;
|
-panel.funcs = &ops;
-panel.dev = device;
)
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-3-laurent.pinchart@ideasonboard.com
