Commit Graph

12791 Commits

Author SHA1 Message Date
Peter Chen
c201369d4a ARM: dts: imx6ull: add imx6ull support
It is the 10th processor in the well-known imx6 series, and derived
from imx6ul but cost optimized. The more information about imx6ull
can be found at:

http://www.nxp.com/products/microcontrollers-and-processors/
arm-processors/i.mx-applications-processors/i.mx-6-processors
/i.mx6qp/i.mx-6ull-single-core-processor-with-arm-cortex-a7-core
:i.MX6ULL

imx6ul.dtsi is the SoC common stuff for both imx6ul and imx6ull;
imx6ul-14x14-evk.dts is the board common stuff for both imx6ul
and imx6ull 14x14 evk. In this patch, for SoC part, the
imx6ull.dtsi includes imx6ul.dtsi; for board part, imx6ull-14x14-evk.dts
includes imx6ul-14x14-evk.dts.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-15 08:54:27 +08:00
Sudeep Holla
70e105ad35 ARM: dts: imx6q: replace gpio-key,wakeup with wakeup-source for Utilite Pro
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.

This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any further copy-paste
duplication.

Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-15 08:12:20 +08:00
Sanchayan Maity
4743ced991 ARM: dts: vfxxx: Enable DMA for DSPI2 and DSPI3
Enable DMA for DSPI2 and DSPI3 on Vybrid.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14 22:02:15 +08:00
Fabio Estevam
7f107887d1 ARM: dts: imx: Remove skeleton.dtsi
As explained by commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated.

This fixes the following warning with W=1:

Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14 15:36:04 +08:00
Christopher Spinrath
425dd2773e ARM: dts: imx6q-utilite-pro: i2c1 is muxed
It turns out that the i2c1 adapter is connected to a multiplexer
controlled by a gpio line. The first (default) mux option connects
i2c1 to a bus connected to the already known peripherals. The other
one connects the adapter to the ddc pins of the DVI port.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14 15:33:13 +08:00
Frank Li
c4479f6f57 ARM: dts: add new compatible string for i.MX6QP mmdc
MMDC has a slightly different programming model between imx6q and imx6qp
in terms of perf support, it's exactly same for suspend support, so we
have fsl,imx6q-mmdc here to save patching suspend driver with the new
compatible.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14 13:36:14 +08:00
Fabio Estevam
841310d00a ARM: dts: imx6sx-udoo: Add board specific compatible strings
Add a compatible entry for the specific board versions.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14 10:30:28 +08:00
Marek Vasut
9827429132 ARM: dts: mx5: Add new M53EVK manufacturer compat
The board is now manufactured by Aries Embedded GmbH, update compat string.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14 09:58:35 +08:00
Marek Vasut
8df0547fb1 ARM: dts: mxs: Add new M28EVK manufacturer compat
The board is now manufactured by Aries Embedded GmbH, update compat string.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14 09:58:30 +08:00
Peter Chen
901725b790 ARM: dts: imx6ul-14x14-evk: update TX D_CAL for USBPHY
We need to change trimming value (as a percentage) of the 17.78mA TX
reference current for better signal quality. With this change, we
can pass the eye-diagram test on this board.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-07 10:05:22 +08:00
Peter Chen
67cb5d52ea ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY
We need to change trimming value (as a percentage) of the 17.78mA TX
reference current for better signal quality. With this change, we
can pass the eye-diagram test on this board.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-07 10:04:57 +08:00
Joshua Clayton
1be81ea586 ARM: dts: imx6: Add imx-weim parameters to dtsi's
imx-weim should always set address-cells to 2,
and size_cells to 1.
On imx6, fsl,weim-cs-gpr will always be &gpr

Set these common parameters in the dtsi file,
rather than in a downstream dts.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-05 19:45:45 +08:00
Jagan Teki
4631170793 ARM: dts: imx: Fix "ERROR: code indent should use tabs where possible"
Fixed code indent tabs in respetcive imx23, imx51, imx53, imx6dl, imx6q
and imx6sx dtsi and dts files.

Signed-off-by: Jagan Teki <jagan@openedev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02 22:43:56 +08:00
Gary Bisson
a7859df4fd ARM: dts: imx6qdl-nitrogen6_max: use hyphens for nodes name
Therefore aligning the panel nodes name across all platforms.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02 15:40:06 +08:00
Gary Bisson
241f8f6fec ARM: dts: imx6qdl-nit6xlite: use hyphens for nodes name
Therefore aligning the panel nodes name across all platforms.

Also removing the bt_rfkill node since the mainline rfkill-gpio driver
doesn't support device trees.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02 15:40:03 +08:00
Gary Bisson
986fb9e4a0 ARM: dts: imx6qdl-nitrogen6x: use hyphens for nodes name
Also aligning the panel nodes name across all platforms.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02 15:40:01 +08:00
Gary Bisson
4abe28eaae ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name
Also aligning the panel nodes name across all platforms.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02 15:39:58 +08:00
Gary Bisson
3faa1bb2e8 ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
SoM based on i.MX6 Quad with 1GB of DDR3.

https://boundarydevices.com/product/nit6x-som-v2/

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02 15:39:54 +08:00
Jagan Teki
801173fe6f ARM: dts: imx6qdl-icore: Add FEC support
Add FEC support for Engicam i.CoreM6 dql modules.

Observed similar 'eth0: link is not ready' issue which was
discussed in [1] due rmii mode with external ref_clk, so added
clock node along with the properties mentioned by Shawn in [2]

FEC link log:
------------
$ ifconfig eth0 up
[   27.905187] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver
               [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
[   27.918982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[1] https://patchwork.kernel.org/patch/3491061/
[2] https://patchwork.kernel.org/patch/3490511/

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-01 21:47:25 +08:00
Jagan Teki
9daee30769 ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
i.CoreM6 DualLite/Solo modules are system on module solutions manufactured
by Engicam with following characteristics:
CPU           NXP i.MX6 DL, 800MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
Power supply  Single 5V
MAX LCD RES   FULLHD

and more info at
http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-01 21:46:53 +08:00
Jagan Teki
6df11287f7 ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
i.CoreM6 Quad/Dual modules are system on module solutions manufactured
by Engicam with following characteristics:
CPU           NXP i.MX6 DQ, 800MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
Power supply  Single 5V
MAX LCD RES   FULLHD

and more info at
http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-01 21:46:43 +08:00
Peter Chen
a16fe2c1f6 ARM: dts: imx6ul-14x14-evk: add USB dual-role support
With commit 851ce93224 ("usb: chipidea: otg: don't wait vbus
drops below BSV when starts host"), the driver can support
enabling vbus output without software control, so this board
(control vbus output through ID pin) can support dual-role now.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-01 21:35:01 +08:00
Marcin Niestroj
478c9440b3 ARM: dts: imx6ul: Add DTS for liteBoard
liteBoard is a development board which uses liteSOM as its base.

Hardware specification:
 * liteSOM (i.MX6UL, DRAM, eMMC)
 * Ethernet PHY (id 0)
 * USB host (usb_otg1)
 * MicroSD slot (uSDHC1)

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 20:14:13 +08:00
Marcin Niestroj
1317efa169 ARM: dts: imx6ul: Add DTS for liteSOM module
This is a SOM (System on Module), so it will be part of another boards.
Hence, this is a "dtsi" file that will be included from another device
tree files.

Hardware specification:
 * Freescale i.MX6UL SoC
 * up to 512 MB RAM
 * eMMC on uSDHC2

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 20:14:08 +08:00
Marek Vasut
95a36c1197 ARM: dts: novena: Enable PWM1
Enable PWM1, otherwise the backlight cannot work.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 19:58:05 +08:00
Andreas Färber
76e691fc76 ARM: dts: imx6sx: Add UDOO Neo support
Add initial device trees for UDOO Neo Basic, Extended and Full boards:
* Serial console is enabled, other serial ports are prepared.
* I2C based PMIC is enabled.
* Ethernet is enabled for Basic and Full.
* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator.
* Both user LEDs are enabled, with the orange one reserved for the M4
  and with the SD card as default trigger for the red LED.

The decision on a board compatible string is deferred to later.

Cc: Ettore Chimenti <ettore.chimenti@udoo.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 19:33:27 +08:00
Hongtao Jia
4d9e9cbb61 ARM: dts: ls1021a: Add TMU device tree support for LS1021A
Also add nodes and properties for thermal management support.

Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:50 +08:00
Sanchayan Maity
14c4163368 ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid
Enable DMA for DSPI on Vybrid.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:50 +08:00
Marek Vasut
f7f3b484d5 ARM: dts: imx6sx: Fix LCDIF interrupt type
The LCDIF interrupt should be triggered by the rising edge of the
IRQ line because we only want the interrupt to trigger once per each
frame. It seems the LCDIF IRQ line cannot be explicitly de-asserted
by software, so the previous behavior before this patch, where the
interrupt was triggered by level-high status of the IRQ line, caused
the interrupt to fire again immediatelly after it was handled, which
caused the system to lock up due to the high rate of interrupts.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:50 +08:00
Andrey Smirnov
fa8d20c8db ARM: dts: vfxxx: Add node corresponding to OCOTP
Add node corresponding to OCOTP IP block.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:49 +08:00
Andrey Smirnov
227802b18d ARM: dts: vf610-zii-dev-rev-b: Remove I2C3
I2C3 bus was only brought out in revision A1 of the board and revision
B1 only brings out 3 I2C busses (I2C0, I2C1 and I2C2).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:49 +08:00
Jagan Teki
49bc67b61c ARM: dts: imx6qdl-wandboard-revb: Fix "ERROR: trailing whitespace"
Fixed error in trailing whitespace in wandboard-rev1 dtsi.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:46 +08:00
Jagan Teki
bf5393c5ec ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Fixed code indent tabs in respetcive imx6qdl dtsi files.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:42 +08:00
Jagan Teki
05c183e44b ARM: dts: imx6qdl: Fix "WARNING: please, no space before tabs"
Fixed no space before tabs warnings in respetcive imx6qdl dtsi files.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-24 16:47:37 +08:00
Jaret Cantu
371a8dd6fa ARM: dts: imx: b650v3: Calibrate USB PHY to pass eye diagram test
Calibrate the USB PHY TX settings to pass the eye diagram signal
integrity test.  The settings are taken from the i.MX6 reference
manual's recommended configuration for USB certification (66.2.6).

Signed-off-by: Jaret Cantu <jaret.cantu@timesys.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-23 20:13:21 +08:00
Sanchayan Maity
ebedca04ec ARM: dts: imx6qdl-apalis: Use enable-gpios property for backlight
Use enable-gpios property of PWM backlight driver for backlight
control.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-22 11:27:20 +08:00
Sanchayan Maity
aacf62465a ARM: dts: imx6q-apalis-ixora: Remove use of pwm-leds
Remove use of pwm-leds and use the standard /sys/class/pwm
interface from PWM subsystem.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-22 11:27:16 +08:00
Sanchayan Maity
fc48e76489 ARM: dts: imx6: Add support for Toradex Colibri iMX6 module
Add support for Toradex Colibri iMX6 module.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-22 11:16:55 +08:00
Linus Torvalds
2d2474a194 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal managament updates from Zhang Rui:

 - Enhance thermal "userspace" governor to export the reason when a
   thermal event is triggered and delivered to user space. From Srinivas
   Pandruvada

 - Introduce a single TSENS thermal driver for the different versions of
   the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for
   msm8916, msm8960, msm8974 and msm8996 families is also added. From
   Rajendra Nayak

 - Introduce hardware-tracked trip points support to the device tree
   thermal sensor framework. The framework supports an arbitrary number
   of trip points. Whenever the current temperature is changed, the trip
   points immediately below and above the current temperature are found,
   driver callback is invoked to program the hardware to get notified
   when either of the two trip points are triggered. Hardware-tracked
   trip points support for rockchip thermal driver is also added at the
   same time. From Sascha Hauer, Caesar Wang

 - Introduce a new thermal driver, which enables TMU (Thermal Monitor
   Unit) on QorIQ platform. From Jia Hongtao

 - Introduce a new thermal driver for Maxim MAX77620. From Laxman
   Dewangan

 - Introduce a new thermal driver for Intel platforms using WhiskeyCove
   PMIC. From Bin Gao

 - Add mt2701 chip support to MTK thermal driver. From Dawei Chien

 - Enhance Tegra thermal driver to enable soctherm node and set
   "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei
   Ni

 - Add resume support for tango thermal driver. From Marc Gonzalez

 - several small fixes and improvements for rockchip, qcom, imx, rcar,
   mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy,
   Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh
   Kang

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits)
  thermal: int3403: Process trip change notification
  thermal: int340x: New Interface to read trip and notify
  thermal: user_space gov: Add additional information in uevent
  thermal: Enhance thermal_zone_device_update for events
  arm64: tegra: set hot trips for Tegra210
  arm64: tegra: set critical trips for Tegra210
  arm64: tegra: add soctherm node for Tegra210
  arm64: tegra: set hot trips for Tegra132
  arm64: tegra: set critical trips for Tegra132
  arm64: tegra: use tegra132-soctherm for Tegra132
  arm: tegra: set hot trips for Tegra124
  arm: tegra: set critical trips for Tegra124
  thermal: tegra: add hw-throttle for Tegra132
  thermal: tegra: add hw-throttle function
  of: Add bindings of hw throttle for Tegra soctherm
  thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register
  thermal: Add Mediatek thermal driver for mt2701.
  dt-bindings: thermal: Add binding document for Mediatek thermal controller
  thermal: max77620: Add thermal driver for reporting junction temp
  thermal: max77620: Add DT binding doc for thermal driver
  ...
2016-10-12 11:05:23 -07:00
Linus Torvalds
6b25e21fa6 Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Core:
   - Fence destaging work
   - DRIVER_LEGACY to split off legacy drm drivers
   - drm_mm refactoring
   - Splitting drm_crtc.c into chunks and documenting better
   - Display info fixes
   - rbtree support for prime buffer lookup
   - Simple VGA DAC driver

  Panel:
   - Add Nexus 7 panel
   - More simple panels

  i915:
   - Refactoring GEM naming
   - Refactored vma/active tracking
   - Lockless request lookups
   - Better stolen memory support
   - FBC fixes
   - SKL watermark fixes
   - VGPU improvements
   - dma-buf fencing support
   - Better DP dongle support

  amdgpu:
   - Powerplay for Iceland asics
   - Improved GPU reset support
   - UVD/VEC powergating support for CZ/ST
   - Preinitialised VRAM buffer support
   - Virtual display support
   - Initial SI support
   - GTT rework
   - PCI shutdown callback support
   - HPD IRQ storm fixes

  amdkfd:
   - bugfixes

  tilcdc:
   - Atomic modesetting support

  mediatek:
   - AAL + GAMMA engine support
   - Hook up gamma LUT
   - Temporal dithering support

  imx:
   - Pixel clock from devicetree
   - drm bridge support for LVDS bridges
   - active plane reconfiguration
   - VDIC deinterlacer support
   - Frame synchronisation unit support
   - Color space conversion support

  analogix:
   - PSR support
   - Better panel on/off support

  rockchip:
   - rk3399 vop/crtc support
   - PSR support

  vc4:
   - Interlaced vblank timing
   - 3D rendering CPU overhead reduction
   - HDMI output fixes

  tda998x:
   - HDMI audio ASoC support

  sunxi:
   - Allwinner A33 support
   - better TCON support

  msm:
   - DT binding cleanups
   - Explicit fence-fd support

  sti:
   - remove sti415/416 support

  etnaviv:
   - MMUv2 refactoring
   - GC3000 support

  exynos:
   - Refactoring HDMI DCC/PHY
   - G2D pm regression fix
   - Page fault issues with wait for vblank

  There is no nouveau work in this tree, as Ben didn't get a pull
  request in, and he was fighting moving to atomic and adding mst
  support, so maybe best it waits for a cycle"

* tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits)
  drm/crtc: constify drm_crtc_index parameter
  drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
  drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
  drm/i915: Reset the breadcrumbs IRQ more carefully
  drm/i915: Force relocations via cpu if we run out of idle aperture
  drm/i915: Distinguish last emitted request from last submitted request
  drm/i915: Allow DP to work w/o EDID
  drm/i915: Move long hpd handling into the hotplug work
  drm/i915/execlists: Reinitialise context image after GPU hang
  drm/i915: Use correct index for backtracking HUNG semaphores
  drm/i915: Unalias obj->phys_handle and obj->userptr
  drm/i915: Just clear the mmiodebug before a register access
  drm/i915/gen9: only add the planes actually affected by ddb changes
  drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
  drm/i915/bxt: Fix HDMI DPLL configuration
  drm/i915/gen9: fix the watermark res_blocks value
  drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
  drm/i915/gen9: minimum scanlines for Y tile is not always 4
  drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
  drm/i915/kbl: KBL also needs to run the SAGV code
  ...
2016-10-11 18:12:22 -07:00
Linus Torvalds
de34f4da7f media updates for v4.9-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX/QbjAAoJEAhfPr2O5OEVDKkP/30o73ZhzBkDR3xgApbmVdrw
 1NQYZq8UKibZ87hv949535N3lwaHFV0mA8ylheu2MMArd1GoZvyXKqNbJN9316kQ
 mSI8wVK77UiBP7RRolEepCuliQExNmayUm+kNZEZsF67+flilkcumCBqlPf114Sl
 ruhpGTSAIz2mgbxGsPkFiN+4xl2AZFOjiiHsp9doBE8HAtEp3PyCrPv5T6zkK7PQ
 KKf7ribcIB65tx0zBmhkfJOef/mqK/t7XgQS7kVRB3G4zr1nkh4g2iw/QbUreBtE
 94p1VYAMBFfpCNe1rWaaBOxYRLsDBMQHz2LvOvj8HZKrsuBCKQQ4jAoYQ4bNi8cu
 nWAb5Z19npoxJRYCGrPs8MJtCFD1IoT4zjiA8Ld5BT4SqBsCQ6VrgiUpQESzjtlj
 Xp7V1D2ak3vx40FAuDGZsb7JwGTuIrK18rZyKSjvHbnydWiJlaHY9kR3lOe91wc2
 MZOiD3K4lM5Lvse07nLVgOTjXW1fC3ScliRCQVLU/Wbm6A8UKiejES8sy0bFk9sU
 8Go3RaAPVeQLGFLqOJG+6yu7sJ1FCZzAthKbpxtY8p/iKZE4QO0n4Y6Q2NjcjHJt
 lDKYp83jne+AMthbLR+Ab6IL2GoOxaW6fnTrDioDxGc9Cvba90xYsZCIxbcGrM4h
 cu1bOLUp5Ei1wHvaqRla
 =JqCR
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Documentation improvements: conversion of all non-DocBook documents
   to Sphinx and lots of fixes to the uAPI media book

 - New PCI driver for Techwell TW5864 media grabber boards

 - New SoC driver for ATMEL Image Sensor Controller

 - Removal of some obsolete SoC drivers (s5p-tv driver and soc_camera
   drivers)

 - Addition of ST CEC driver

 - Lots of drivers fixes, improvements and additions

* tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits)
  [media] ttusb_dec: avoid the risk of go past buffer
  [media] cx23885: Fix some smatch warnings
  [media] si2165: switch to regmap
  [media] si2165: use i2c_client->dev instead of i2c_adapter->dev for logging
  [media] si2165: Remove legacy attach
  [media] cx231xx: attach si2165 driver via i2c_client
  [media] cx231xx: Prepare for attaching new style i2c_client DVB demod drivers
  [media] cx23885: attach si2165 driver via i2c_client
  [media] si2165: support i2c_client attach
  [media] si2165: avoid division by zero
  [media] rcar-vin: add R-Car gen2 fallback compatibility string
  [media] lgdt3306a: remove 20*50 msec unnecessary timeout
  [media] cx25821: Remove deprecated create_singlethread_workqueue
  [media] cx25821: Drop Freeing of Workqueue
  [media] cxd2841er: force 8MHz bandwidth for DVB-C if specified bw not supported
  [media] redrat3: hardware-specific parameters
  [media] redrat3: remove hw_timeout member
  [media] cxd2841er: BER and SNR reading for ISDB-T
  [media] dvb-usb: avoid link error with dib3000m{b,c|
  [media] dvb-usb: split out common parts of dibusb
  ...
2016-10-11 13:22:22 -07:00
Linus Torvalds
c913fc4146 ARM: SoC: late DT updates for v4.9
These updates have been kept in a separate branch mostly because
 they rely on updates to the respective clk drivers to keep the
 shared header files in sync.
 
 - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
   automotive SoC similar to the ⅹ8a7795 chip we already support, but
   the dts changes rely on a clock driver change that has been
   merged for v4.9 through the clk tree.
 
 - The Amlogic meson-gxbb (S905) platform gains support for a few
   drivers merged through our tree, in particular the network and
   usb driver changes are required and included here, and also
   the clk tree changes.
 
 - The Allwinner platforms have seen a large-scale change to their
   clk drivers and the dts file updates must come after that.
   This includes the newly added Nextthing GR8 platform, which is
   derived from sun5i/A13.
 
 - Some integrator (arm32) changes rely on clk driver changes.
 
 - A single patch for lpc32xx has no such dependency but wasn't
   added until just before the merge window
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gzeGCrR//JCVInAQKVhw/5AS5R2S7m7VTlWMvGjvH9ITudYhiAGJP1
 z5nP5SwJsfmSjfvw0kSxGUmsNS3rHutsPMz65EesKqFuC3LPZiqMUqrzxt9iqqJx
 I+XdAxDTnOE1RBZFtB9dL+qLzHQ87pMo6R9dfs32sxb3QuCQBYhcFyLmQDuZuHH0
 yeDi3ARFvgxx/qoRUA7cnSlY5RLNzM44y+Ik/ZcVr4ReqYBC2g5mGi5htoiNSLWR
 nwWR+5hNLAp44OZgkZfNsf6kB9brWDQh3PbnBjy6sKXSBoSVIfxTweh2DMJXbZ7l
 1Ck+S7WyLMhGJp448TcuBykr/l9i3uqNh061XavjwP8CAjAdZ787XlnNSztc2pyh
 dvbI/E76pLGb5ZoFdqlY2Syl63ZFN4K8mjZMSPYfYKf85EDIxe4MYwpbo7/pwzh3
 8OlBwH6r4aUMw+QgE1nx8nsjaCoGDMFdgJeJJaWdriZ6Nst2n5gREk/mzbrAWkNG
 ujChn/6hES9LuE21aCp1ipB7qnnyeRinfqz2acEFxMQxuPdjwKrdJqNsBaTWsapE
 Z+b/BFP+LTdPfHCmMSVwfMrNbwsoY7+L4EXXL36lUgOwcDp0vCXA+PiiahYASewA
 1LDQ3CURCEapdBhVU+06Kb4y5eWU7M7EqpOwpHgRJ92dVxgNxuCfcurvxzqPP1UP
 3O4R7bfUTTg=
 =OmAu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...
2016-10-07 21:34:49 -07:00
Linus Torvalds
00e729c933 ARM: DT updates for v4.9
These are as usual a very large number of mostly boring updates to
 enable devices in existing machines, or to fix minor bugs.  Notably,
 an ongoing treewide effort to fix warnings caused by an update to the
 device tree compiler. These are enabled with "make W=1" at the moment
 but can hopefully become the default once all issues have been addressed.
 
 No new SoC platform is added this time around (Armada 395 and Orion
 mv88f5181 are slight variations of existing ones), but a significant
 number of new dts files are added, which I list by platform:
 
 - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets;
 	Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E,
 	Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo
 	single-board computers
 
 - ARM Realview: all supported machines (ported from board files)
 
 - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
 	BCM958622hr reference boards for Northstar platform;
 	Raspberry Pi Zero single-board computer
 
 - Marvell EBU: Netgear WNR854T router (ported from board file);
 	Armada 395 SoC platform and GP board
 	Armada 390 DB development board
 
 - NXP i.MX: imx7s Warp7 reference board;
 	Gateworks Ventana GW553x single-board computer,
 	Technologic Systems TS-4900 and
 	Engicam IMX6UL GEA M6UL computer-on-module,
 	Inverse Path USB armory board
 
 - Qualcomm: LG Nexus 5 Phone
 
 - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards
 
 - Rockchip: Rockchip RK3288 Fennec reference board;
 	Firefly RK3288 Reload platform
 
 - ST Microelectronics STi: B2260 (96boards) single-board computer
 
 - TI Davinci: OMAP-L138 LCDK Development kit
 
 - TI OMAP: beagleboard-x15 rev B1 single-board computer
 
 Conflicts: vendor-prefixes.txt has conflicting additions, keep all of
 them in alphabetical order.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/g11mCrR//JCVInAQIWbw/9FOrBghI2bFqZkDwFE8E3QCpc9bIiETMx
 FMdHV6FAo0D6Yp4EqlWjFI0u0Kn9l4FKz0SYWAigpfT6gfeI1THC2Kl31mslvb5U
 v3QreXI4rKjZS/B1lYECee0os+fNvJcWKj3uFjb4VT1k7T6+MytjHGAQSzwxM66Q
 0Lp5HjdFGDrOXoIUx2eEZkZlVXyQ2EFocMoAsj+s/MHnA8fn1tWW08633kjTsC6y
 9Xj71joghlDKZjA56htaEQ+/6dYdxAHVlvkN7aL9di+2Sc2/ma6my70Zvs4zwtOv
 uJDhcJhjwvf3QtDuOoGhTnFtQYQWaONaGUFyEwYyy2kIwiJy0afep4JCq2o+/CZM
 VMvGXepJpVujE9mg+LwHPgaMYgBhswsJzwQ2ZESrMQcUZ624E18dG2/ei5zat4UN
 5/NvzxEoDGmfQFQUpuoZuPqhwLRauXr7I+u4aliIdtSBGeaA2T1yFT4pVgNUOxBQ
 0bMtE2QSUKyaF+xAHLTsV7yheDU0S+C7zVkLPwePK0V7vUFuBsdQiXEqXh/6MSq0
 iYVPmKwNTIHK3qMiGtm8XDugjR8Pf0tCXRqIWJMlXs75rCAsKfFW4j4XYnlO4wMy
 dP2fdoe0xA+zthR0hRHD5i8WCmISeUgtPAdFyTid1jZkMk1AzM0AqBUdAqTInvQ3
 O4JSYcjBWoo=
 =/gg/
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are as usual a very large number of mostly boring updates to
  enable devices in existing machines, or to fix minor bugs. Notably, an
  ongoing treewide effort to fix warnings caused by an update to the
  device tree compiler. These are enabled with "make W=1" at the moment
  but can hopefully become the default once all issues have been
  addressed.

  No new SoC platform is added this time around (Armada 395 and Orion
  mv88f5181 are slight variations of existing ones), but a significant
  number of new dts files are added, which I list by platform:

   - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets,
     Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite,
     Olimex A33-Olinuxino, and Nano Pi Neo single-board computers

   - ARM Realview: all supported machines (ported from board files)

   - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
     BCM958622hr reference boards for Northstar platform, Raspberry Pi
     Zero single-board computer

   - Marvell EBU: Netgear WNR854T router (ported from board file),
     Armada 395 SoC platform and GP board Armada 390 DB development
     board

   - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x
     single-board computer, Technologic Systems TS-4900 and Engicam
     IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board

   - Qualcomm: LG Nexus 5 Phone

   - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards

   - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288
     Reload platform

   - ST Microelectronics STi: B2260 (96boards) single-board computer

   - TI Davinci: OMAP-L138 LCDK Development kit

   - TI OMAP: beagleboard-x15 rev B1 single-board computer"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits)
  ARM: dts: sony-nsz-gs7: add missing unit name to /memory node
  ARM: dts: chromecast: add missing unit name to /memory node
  ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node
  ARM: dts: berlin2: Add missing unit name to /soc node
  ARM: dts: berlin2cd: Add missing unit name to /soc node
  ARM: dts: berlin2q: Add missing unit name to /soc node
  ARM: dts: berlin2: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2q: Remove skeleton.dtsi inclusion
  arm: dts: berlin2q: enable all wdt nodes unconditionally
  arm: dts: berlin2: enable all wdt nodes unconditionally
  ARM: dts: omap5-igep0050.dts: Use tabs for indentation
  ARM: dts: Fix igepv5 power button GPIO direction
  ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes
  ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: s3c64xx: Use macros for pinctrl configuration
  ARM: dts: s3c2416: Use macros for pinctrl configuration
  ARM: dts: s5pv210: Use macros for pinctrl configuration
  ARM: dts: s3c64xx: Use common macros for pinctrl configuration
  ...
2016-10-07 21:29:04 -07:00
Linus Torvalds
6afd563d4b ARM: SoC driver updates for v4.9
Driver updates for ARM SoCs, including a couple of newly added drivers:
 
 - The Qualcomm external bus interface 2 (EBI2), used in some of their
   mobile phone chips for connecting flash memory, LCD displays or
   other peripherals
 
 - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the
   EFUSE based on that firmware interface.
 
 - Perf support for the AppliedMicro X-Gene performance monitor unit
 
 - Reset driver for STMicroelectronics STM32
 
 - Reset driver for SocioNext UniPhier SoCs
 
 Aside from these, there are minor updates to SoC-specific bus,
 clocksource, firmware, pinctrl, reset, rtc and pmic drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gaimCrR//JCVInAQJaOQ/6A++YfLVmdF4wxgcu/0ti28lA7SkQIGJV
 UAsfCmqMEutbeDvnloVGmTV2K2NS7mzxdxsJGbVB7Oe/zdOFN+T9sf9hAlId01QA
 oVkoagpofoxlyKoKJ/l+heuEEZMa0Ekk3XXRTGv/Ovymo7252o4tEdGu9c+gyaMJ
 KqgixcrQRzxuWDgPpHUPUez2vY1iRMvvdcb0EmfiHcIgPOEJc6MIxulsqEIrkoMz
 WYeGFIeqRJxnrur3QD8WnD+aZD6bV01wkFTkWXGWg4H87QfEESgVBu5A7TL+5sL8
 1SlX/b7S5/ZJbrOiOS2IUyvbK7NiA/Q+NunHW2rMVnUWuEvJ9HAQB1kVSQH5LIYO
 6OBokjcijm6m/j6O6fdDfvNd6PLsIEUqfWVws7O+uofMMqKPxqak4VBTRdFM+aeF
 ZtK7mEbzteCX0bnC+XblZrseAlkIehYnP80CLDbtDTerTWP4gsjxGVt3U6MO0NzB
 K0ACWZOclzrcFscNKrmP6uPCpfZriiPV/XMCEHcylA/X2iYsVmpqKzdLuNs5aeUr
 uPzQbNWu9ygg/bDRXMYY2E3Kzjsc0eIOKEOPyhLaZdSo4e1FQxud6L2V2Vj0RLB/
 iMA7/CyQZqn6Yzgs0VMZm/bnh+hIdHioGFl5K5j6Fcw9VZRkNmnEQJzX4VU5efGO
 g1+5av0vFXg=
 =GvTq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - The Qualcomm external bus interface 2 (EBI2), used in some of their
     mobile phone chips for connecting flash memory, LCD displays or
     other peripherals

   - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for
     the EFUSE based on that firmware interface.

   - Perf support for the AppliedMicro X-Gene performance monitor unit

   - Reset driver for STMicroelectronics STM32

   - Reset driver for SocioNext UniPhier SoCs

  Aside from these, there are minor updates to SoC-specific bus,
  clocksource, firmware, pinctrl, reset, rtc and pmic drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  bus: qcom-ebi2: depend on HAS_IOMEM
  pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
  clk: mvebu: Add clk support for the orion5x SoC mv88f5181
  dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
  clocksource: exynos_mct: Add the support for ARM64
  perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
  Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
  MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
  bus: qcom: add EBI2 driver
  bus: qcom: add EBI2 device tree bindings
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  soc: qcom: smd: Reset rx tail rather than tx
  memory: atmel-sdramc: fix a possible NULL dereference
  reset: hi6220: allow to compile test driver on other architectures
  reset: zynq: add driver Kconfig option
  reset: sunxi: add driver Kconfig option
  reset: stm32: add driver Kconfig option
  reset: socfpga: add driver Kconfig option
  ...
2016-10-07 21:23:40 -07:00
Linus Torvalds
82fa407da0 Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:

 - Correct ARMs dma-mapping to use the correct printk format strings.

 - Avoid defining OBJCOPYFLAGS globally which upsets lkdtm rodata
   testing.

 - Cleanups to ARMs asm/memory.h include.

 - L2 cache cleanups.

 - Allow flat nommu binaries to be executed on ARM MMU systems.

 - Kernel hardening - add more read-only after init annotations,
   including making some kernel vdso variables const.

 - Ensure AMBA primecell clocks are appropriately defaulted.

 - ARM breakpoint cleanup.

 - Various StrongARM 11x0 and companion chip (SA1111) updates to bring
   this legacy platform to use more modern APIs for (eg) GPIOs and
   interrupts, which will allow us in the future to reduce some of the
   board-level driver clutter and elimate function callbacks into board
   code via platform data. There still appears to be interest in these
   platforms!

 - Remove the now redundant secure_flush_area() API.

 - Module PLT relocation optimisations. Ard says: This series of 4
   patches optimizes the ARM PLT generation code that is invoked at
   module load time, to get rid of the O(n^2) algorithm that results in
   pathological load times of 10 seconds or more for large modules on
   certain STB platforms.

 - ARMv7M cache maintanence support.

 - L2 cache PMU support

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (35 commits)
  ARM: sa1111: provide to_sa1111_device() macro
  ARM: sa1111: add sa1111_get_irq()
  ARM: sa1111: clean up duplication in IRQ chip implementation
  ARM: sa1111: implement a gpio_chip for SA1111 GPIOs
  ARM: sa1111: move irq cleanup to separate function
  ARM: sa1111: use devm_clk_get()
  ARM: sa1111: use devm_kzalloc()
  ARM: sa1111: ensure we only touch RAB bus type devices when removing
  ARM: 8611/1: l2x0: add PMU support
  ARM: 8610/1: V7M: Add dsb before jumping in handler mode
  ARM: 8609/1: V7M: Add support for the Cortex-M7 processor
  ARM: 8608/1: V7M: Indirect proc_info construction for V7M CPUs
  ARM: 8607/1: V7M: Wire up caches for V7M processors with cache support.
  ARM: 8606/1: V7M: introduce cache operations
  ARM: 8605/1: V7M: fix notrace variant of save_and_disable_irqs
  ARM: 8604/1: V7M: Add support for reading the CTR with read_cpuid_cachetype()
  ARM: 8603/1: V7M: Add addresses for mem-mapped V7M cache operations
  ARM: 8602/1: factor out CSSELR/CCSIDR operations that use cp15 directly
  ARM: kernel: avoid brute force search on PLT generation
  ARM: kernel: sort relocation sections before allocating PLTs
  ...
2016-10-06 07:59:37 -07:00
Russell King
301a36fa70 Merge branches 'misc' and 'sa1111-base' into for-linus 2016-10-06 08:56:43 +01:00
Mauro Carvalho Chehab
9fce0c2265 Linux 4.8
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJX8Zc4AAoJEHm+PkMAQRiGQG8H/2Hd4IwJh75snGY5LAiWt6ra
 kGM/SobvLAMtcoxXCeHqf2bZrxa2Zz9tnEzhuLMGaf9a3l79xHa8YumK5KS1JPGV
 6lZBvuPi8BIyT0cpYH000e5ehHfhP6pSGJKZ2EuLv43HcBeVZEGAf3/8jSAlNA15
 bwFy2ZEkwJGThbnT6au0Y3s9h8LcNjtllu9hjfb+/9oNGvp8r4QhdVodIqIQ4cv6
 SeUfv7Pn2LZDMCSaTP9bh2KaR4dwYZHFsVe75x2wND5Sfq7DVBBfFkAoV/RwJDTM
 gBc3PNnmzb/tix6ohOrSQnSiGsXv1uASxvHH3RD2zG6g7Aj9Eq/+Z7ZdPu2+o+U=
 =U+ef
 -----END PGP SIGNATURE-----

Merge tag 'v4.8' into patchwork

Linux 4.8

* tag 'v4.8': (1761 commits)
  Linux 4.8
  ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
  MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems
  include/linux/property.h: fix typo/compile error
  ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock()
  mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()
  MAINTAINERS: Switch to kernel.org email address for Javi Merino
  x86/entry/64: Fix context tracking state warning when load_gs_index fails
  x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID
  x86/vdso: Fix building on big endian host
  x86/boot: Fix another __read_cr4() case on 486
  sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock
  sctp: change to check peer prsctp_capable when using prsctp polices
  sctp: remove prsctp_param from sctp_chunk
  sctp: move sent_count to the memory hole in sctp_chunk
  tg3: Avoid NULL pointer dereference in tg3_io_error_detected()
  x86/init: Fix cr4_init_shadow() on CR4-less machines
  MIPS: Fix detection of unsupported highmem with cache aliases
  MIPS: Malta: Fix IOCU disable switch read for MIPS64
  MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS
  ...
2016-10-05 16:43:53 -03:00
Linus Torvalds
64cbd16a87 MMC core:
- Add support for sending commands during data transfer
  - Erase/discard/trim improvements
  - Improved error handling
  - Extend sysfs with SD status register
  - Document info about the vmmc/vmmcq regulators
  - Extend pwrseq-simple to manage an optional post-power-on-delay
  - Some various minor improvements and cleanups
 
 MMC host:
  - dw_mmc: Add reset support
  - dw_mmc: Return -EILSEQ for EBE and SBE error
  - dw_mmc: Some cleanups
  - dw_mmc-k3: Add UHS-I support Hisilicon Hikey
  - tmio: Add eMMC support
  - sh_mobile_sdhi: Add r8a7796 support
  - sunxi: Don't use sample clocks for sun4i/sun5i
  - sunxi: Add support for A64 mmc controller
  - sunxi: Some cleanups and improvements
  - sdhci: Support for sending commands during data transfer
  - sdhci: Do not allow tuning procedure to be interrupted
  - sdhci-pci: Enable SD/SDIO on Merrifield
  - sdhci-pci|acpi: Enable MMC_CAP_CMD_DURING_TFR
  - sdhci-pci: Some cleanups
  - sdhci-of-arasan: Set controller to test mode when no CD bit
  - sdhci-of-arasan: Some fixes for clocks and phys
  - sdhci-brcmstb: Don't use ADMA 64-bit when not supported
  - sdhci-tegra: Mark 64-bit DMA broken on Tegra124
  - sdhci-esdhc-imx: Fixups related to data timeouts
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX9NVDAAoJEP4mhCVzWIwpjCAP/Am7i2zfql9Gq/rhbrcp7dTe
 eTWnz/nuadqGV8p4DCMP+SzTZQpKrP1+mihnpoxDy7o+VLsu6YLrQ5xD/YBCv40j
 6Fat0fK1Cym1QSFW7nPjTL2qUAt5BbNJbiMHwqFupXpdtoFuVsMCOWJJktno1QW6
 VkAdsr2mbamY6nlpVV0INlJuss2Hqh05PEEYISHdbYxSCjMWsTZm7p2Eghkuwics
 dZMVxkLIw93BRxLf91b7s6dVerYGfKAq16pV3dmeejtW9vNwcmSGQMcMbTRZHOSl
 CtMhx1Qw88vYtGgl3LV0mKa+2/06ZWNG9ZwakuNTQZI5khVjmGuwJDINpEBq/lcC
 0QXNLhzx+Z4h+s2iY02Xv5k0tywcHlG9blIPXE6z3O1nsFVdXjyUQ5KcM9w8rbcS
 X4auw3ERLoVgyPgK1gKKax1z8dO7JnvmwFZYgVZxsbj7lIYr+2xs42R5R3enDzmt
 HPLDvqiM4RQKbpZxaiCos3XcrBs258SpPoHQSl5JyCYsYhAfQKcOZWdJpIr3BK7d
 SRQupbEzK160i6Umz6+VU15CFnaBqD3Atab4XTEt/GBY+RbzK/FeWKpeYIrPV8xe
 GSi3WN+BwIi3tczg8J81CBgr0gFqOh7VNz0lmvrm+YqvARAmRqJxIijNWU4ZwGdi
 Q1gOTVWSveyIM87PhMhG
 =b0/p
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:

  MMC core:
   - Add support for sending commands during data transfer
   - Erase/discard/trim improvements
   - Improved error handling
   - Extend sysfs with SD status register
   - Document info about the vmmc/vmmcq regulators
   - Extend pwrseq-simple to manage an optional post-power-on-delay
   - Some various minor improvements and cleanups

  MMC host:
   - dw_mmc: Add reset support
   - dw_mmc: Return -EILSEQ for EBE and SBE error
   - dw_mmc: Some cleanups
   - dw_mmc-k3: Add UHS-I support Hisilicon Hikey
   - tmio: Add eMMC support
   - sh_mobile_sdhi: Add r8a7796 support
   - sunxi: Don't use sample clocks for sun4i/sun5i
   - sunxi: Add support for A64 mmc controller
   - sunxi: Some cleanups and improvements
   - sdhci: Support for sending commands during data transfer
   - sdhci: Do not allow tuning procedure to be interrupted
   - sdhci-pci: Enable SD/SDIO on Merrifield
   - sdhci-pci|acpi: Enable MMC_CAP_CMD_DURING_TFR
   - sdhci-pci: Some cleanups
   - sdhci-of-arasan: Set controller to test mode when no CD bit
   - sdhci-of-arasan: Some fixes for clocks and phys
   - sdhci-brcmstb: Don't use ADMA 64-bit when not supported
   - sdhci-tegra: Mark 64-bit DMA broken on Tegra124
   - sdhci-esdhc-imx: Fixups related to data timeouts

* tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc: (68 commits)
  mmc: dw_mmc: remove the deprecated "supports-highspeed" property
  mmc: dw_mmc: minor cleanup for dw_mci_adjust_fifoth
  mmc: dw_mmc: use macro to define ring buffer size
  mmc: dw_mmc: fix misleading error print if failing to do DMA transfer
  mmc: dw_mmc: avoid race condition of cpu and IDMAC
  mmc: dw_mmc: split out preparation of desc for IDMAC32 and IDMAC64
  mmc: core: don't try to switch block size for dual rate mode
  mmc: sdhci-of-arasan: Set controller to test mode when no CD bit
  dt: sdhci-of-arasan: Add device tree option xlnx, fails-without-test-cd
  mmc: tmio: add eMMC support
  mmc: rtsx_usb: use new macro for R1 without CRC
  mmc: rtsx_pci: use new macro for R1 without CRC
  mmc: add define for R1 response without CRC
  mmc: card: do away with indirection pointer
  mmc: sdhci-acpi: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers
  mmc: sdhci-pci: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers
  mmc: sdhci: Support cap_cmd_during_tfr requests
  mmc: mmc_test: Add tests for sending commands during transfer
  mmc: core: Add support for sending commands during data transfer
  mmc: sdhci-brcmstb: Fix incorrect capability
  ...
2016-10-05 11:34:53 -07:00
Linus Torvalds
19fe416532 * Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
buffers (Thor Thayer)
 
 * Split the memory controller part out of mpc85xx and share it with a
 * new Freescale ARM Layerscape driver (York Sun)
 
 * amd64_edac fixes (Yazen Ghannam)
 
 * Misc cleanups, refactoring and fixes all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX80EwAAoJEBLB8Bhh3lVKWwYP/1bbODQ7o+XhO8IaCDffYk30
 8y4WdSnI0/QcP8JbSvFA7y6Zn4L0BbrbYhKLRDAg9c34V2bMaqonCnkDtT6YatUb
 6l0H/hQ/Cah9AOm5PJLYg6O9s+ZBT8zA5b+F2Z9kUsuB6LSnVhp9skNrH6KPlm0U
 4pFaLnHQenQPZbuRCfRxPU49ZuKtBZtQDkJLJlHXwn7e1qZy2Q4tMnnEtsY6U2ea
 t3Hj+F8g+cdoiTQXOceCcOTR8GqDI6szgzn7vpXAGYvljBndszauAkxO7by79jg1
 I8AQfgwoBF5CYL2Q0pzT1maHmmG2sydeRAHIvhmGxiEfFz1abWhriXbS33c32q8a
 iFiVMAUIaSKpB/sB+5w5ymuBctI1mX5EQVW+8Xl2Gxt+olnhdJMocHnvQdYkfsYm
 Ka8LcbaiK6ZQTbs/cIMOc2paE0AFPu5uXKHCPeZlhQAxOBvSPuDAv0+qUB/of5Uq
 1SPidtsTmCI7X2hrdHAH9hLEkSjq68v3kqL5YnZL3H4gA3WohQEmX9ybjk097Kus
 WWEhdi/PSFX0qQKotMUUDuxfNcKI6PZH9p+i2dN6tNCkiTDdb0Eo5lCXN7RVVhvq
 qfE0Fcc4uDzh5MUS5jT58MWpA1cfdu9jbAf2BwFIU/poJcaeqy/SMyzCL+1D2/u6
 dmDAtQbKUUwiltB8QzQd
 =pcI8
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "A lot of movement in the EDAC tree this time around, coarse summary
  below:

   - Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
     buffers (Thor Thayer)

   - split the memory controller part out of mpc85xx and share it with a
     new Freescale ARM Layerscape driver (York Sun)

   - amd64_edac fixes (Yazen Ghannam)

   - misc cleanups, refactoring and fixes all over the place"

* tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits)
  EDAC, altera: Add IRQ Flags to disable IRQ while handling
  EDAC, altera: Correct EDAC IRQ error message
  EDAC, amd64: Autoload module using x86_cpu_id
  EDAC, sb_edac: Remove NULL pointer check on array pci_tad
  EDAC: Remove NO_IRQ from powerpc-only drivers
  EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe()
  EDAC, fsl_ddr: Add entry to MAINTAINERS
  EDAC: Move Doug Thompson to CREDITS
  EDAC, I3000: Orphan driver
  EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul()
  EDAC, layerscape: Add Layerscape EDAC support
  EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed
  EDAC, fsl_ddr: Add support for little endian
  EDAC, fsl_ddr: Add missing DDR DRAM types
  EDAC, fsl_ddr: Rename macros and names
  EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx
  EDAC, mpc85xx: Replace printk() with pr_* format
  EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1
  EDAC, altera: Rename MC trigger to common name
  EDAC, altera: Rename device trigger to common name
  ...
2016-10-04 12:06:26 -07:00
Linus Torvalds
999dcbe241 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq departement proudly presents:

   - A rework of the core infrastructure to optimally spread interrupt
     for multiqueue devices. The first version was a bit naive and
     failed to take thread siblings and other details into account.
     Developed in cooperation with Christoph and Keith.

   - Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is
     active then no further softirq processsing on interrupt return
     happens. Otherwise we try to delegate and still run another batch
     of network packets in the irq return path, which then tries to
     delegate to ksoftirqd .....

   - A proper machine parseable sysfs based alternative for
     /proc/interrupts.

   - ACPI support for the GICV3-ITS and ARM interrupt remapping

   - Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC

   - A new irq chip for the JCore (SuperH)

   - The usual pile of small fixlets in core and irqchip drivers"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  softirq: Let ksoftirqd do its job
  genirq: Make function __irq_do_set_handler() static
  ARM/dts: Add EXTI controller node to stm32f429
  ARM/STM32: Select external interrupts controller
  drivers/irqchip: Add STM32 external interrupts support
  Documentation/dt-bindings: Document STM32 EXTI controller bindings
  irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs
  pci/msi: Retrieve affinity for a vector
  genirq/affinity: Remove old irq spread infrastructure
  genirq/msi: Switch to new irq spreading infrastructure
  genirq/affinity: Provide smarter irq spreading infrastructure
  genirq/msi: Add cpumask allocation to alloc_msi_entry
  genirq: Expose interrupt information through sysfs
  irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization
  irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI
  irqchip/gicv3-its: Probe ITS in the ACPI way
  irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI
  irqchip/gicv3-its: Cleanup for ITS domain initialization
  PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
  ACPI: Add new IORT functions to support MSI domain handling
  ...
2016-10-03 19:10:15 -07:00