- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to be
used by the different sensors when registering a thermal zone
(Daniel Lezcano).
- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba).
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn).
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3 (Wolfram
Sang).
- Convert the QCom tsens DT binding to the dtsformat format (Krzysztof
Kozlowski).
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano).
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof).
- Fix array underflow in prep_lookup_table (Dan Carpenter).
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun).
- Fix typos in comments detected on sun8i by Coccinelle (Julia
Lawall).
- Fix typos in comments on rzg2l (Biju Das).
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li).
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov).
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer).
- Fix typo in the comments for the 'tmon' tool (Slark Xiao).
- Make the thermal core use ida_alloc()/free() directly instead of
ida_simple_get()/ida_simple_remove() that have been deprecated
(keliu).
- Drop ACPI_FADT_LOW_POWER_S0 check from the Intel PCH thermal control
driver (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=wj9M
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These start a rework of the handling of trip points in the thermal
core, improve the cpufreq/devfreq cooling device handling, update some
thermal control drivers and the tmon utility and clean up code.
Specifics:
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to
be used by the different sensors when registering a thermal zone
(Daniel Lezcano).
- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba).
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn).
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3
(Wolfram Sang).
- Convert the QCom tsens DT binding to the dtsformat format
(Krzysztof Kozlowski).
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano).
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof).
- Fix array underflow in prep_lookup_table (Dan Carpenter).
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun).
- Fix typos in comments detected on sun8i by Coccinelle (Julia
Lawall).
- Fix typos in comments on rzg2l (Biju Das).
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li).
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov).
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer).
- Fix typo in the comments for the 'tmon' tool (Slark Xiao).
- Make the thermal core use ida_alloc()/free() directly instead of
ida_simple_get()/ida_simple_remove() that have been deprecated
(keliu).
- Drop ACPI_FADT_LOW_POWER_S0 check from the Intel PCH thermal
control driver (Rafael Wysocki)"
* tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
thermal/of: Initialize trip points separately
thermal/of: Use thermal trips stored in the thermal zone
thermal/core: Add thermal_trip in thermal_zone
thermal/core: Rename 'trips' to 'num_trips'
thermal/core: Move thermal_set_delay_jiffies to static
thermal/core: Remove unneeded EXPORT_SYMBOLS
thermal/of: Move thermal_trip structure to thermal.h
thermal/of: Remove the device node pointer for thermal_trip
thermal/of: Replace device node match with device node search
thermal/core: Remove duplicate information when an error occurs
thermal/core: Avoid calling ->get_trip_temp() unnecessarily
thermal/tools/tmon: Fix typo 'the the' in comment
thermal/tools/tmon: Include pthread and time headers in tmon.h
thermal/ti-soc-thermal: Fix comment typo
thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
thermal/drivers/u8500: Remove unnecessary print function dev_err()
thermal/drivers/rzg2l: Fix comments
thermal/drivers/sun8i: Fix typo in comment
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
...
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq policy
which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
fucntion parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=XeLV
-----END PGP SIGNATURE-----
Merge tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly minor improvements all over including new CPU IDs for
the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
updates, documentation cleanups and a new version of the pm-graph
suite of utilities.
Specifics:
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq
policy which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
function parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello)"
* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
PM: QoS: Add check to make sure CPU freq is non-negative
PM: hibernate: defer device probing when resuming from hibernation
intel_idle: make SPR C1 and C1E be independent
cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
cpufreq: loongson2: fix Kconfig "its" grammar
pm-graph v5.9
cpufreq: Warn users while freeing active policy
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
PM: domains: Ensure genpd_debugfs_dir exists before remove
PM: runtime: Extend support for wakeirq for force_suspend|resume
...
core:
- Make wait_event_hrtimeout() ware of RT/DL tasks
drivers:
- New driver for the R-Car Gen4 timer
- New driver for the Tegra186 timer
- New driver for the Mediatek MT6795 CPUXGPT timer
- Rework suspend/resume handling in timer drivers so it
takes inactive clocks into account.
- The usual device tree compatible add ons
- Small fixed and cleanups all over the place
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmLn5vUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoV5HEACj2xGuGCnMBkOddhwAhSh8dsMP0+Sb
gRoC6urvlAxDvehblZJ7BD1o9yZqHEguoPeJLRgPVzSDGADWppzj3N0lGtJnELcQ
XQ93SQYBxpy3eJP7AzkUxdy/pvleIAfmje6VlbKnzNEtM/csXS+kJuL9HSgOFDBr
NWVtTtkQCgFmkI6bRoQqq3fU0mYkHnK+KwBrXoX3QJntwEZ7WM0YySE+U1RbeYuh
bo6K2x+gllJXD7wF4X2quQ7PBbiRLw7/2aEeO10mcSPn1sl/efMg3i4a4cmck0ce
zrjQWC1s0hv4PRJRbEKN9wiwrgYyyYaUeWPWDO+6iF69e2i5qu6wRHJM8tyeEm9R
olEt8o6Go0Yw4KZfOeVgK87vsIV50GDD6b/D2ingY5OjiJT6glwmO6yMQ9USa3B6
BUfSLt1LG/AMJ2kWkOKN4AckaUaSh/IZ150ZjFA7hEy1RW9+XCsf0q0IMgEh43xL
D6W+IHdtOZnVMHztxT9H0hzmUnCrj7vcsyrxagEo9rMeiFhCK/5OCh9HENZYsrNg
zElnG++WwP5i9pOzC3Sl5mj/4nYVj5LNpmt4XZGp+7A3+UAfeFvgq7It0b74M6rW
SfyC6D9X4uL0j2VVLRxV0o9Kqnqecc0S50NrPOkXTVPn2pYjRfqVBp0gj5T3knBO
0Vvrwy8Owc1iAA==
=kPNA
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Timers, timekeeping and related drivers update:
Core:
- Make wait_event_hrtimeout() aware of RT/DL tasks
New drivers:
- R-Car Gen4 timer
- Tegra186 timer
- Mediatek MT6795 CPUXGPT timer
Updates:
- Rework suspend/resume handling in timer drivers so it
takes inactive clocks into account.
- The usual device tree compatible add ons
- Small fixed and cleanups all over the place"
* tag 'timers-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
wait: Fix __wait_event_hrtimeout for RT/DL tasks
clocksource/drivers/sun5i: Remove unnecessary (void*) conversions
dt-bindings: timer: allwinner,sun4i-a10-timer: Add D1 compatible
dt-bindings: timer: ingenic,tcu: use absolute path to other schema
clocksource/drivers/sun4i: Remove unnecessary (void*) conversions
dt-bindings: timer: renesas,cmt: Fix R-Car Gen4 fall-out
clocksource/drivers/tegra186: Put Kconfig option 'tristate' to 'bool'
clocksource/drivers/timer-ti-dm: Make driver selection bool for TI K3
clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs
clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3
clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6
clocksource/drivers/sh_cmt: Add R-Car Gen4 support
dt-bindings: timer: renesas,cmt: R-Car V3U is R-Car Gen4
dt-bindings: timer: renesas,cmt: Add r8a779f0 and generic Gen4 CMT support
clocksource/drivers/timer-microchip-pit64b: Fix compilation warnings
clocksource/drivers/timer-microchip-pit64b: Use mchp_pit64b_{suspend, resume}
clocksource/drivers/timer-microchip-pit64b: Remove suspend/resume ops for ce
thermal/drivers/rcar_gen3_thermal: Add r8a779f0 support
clocksource/drivers/timer-mediatek: Implement CPUXGPT timers
dt-bindings: timer: mediatek: Add CPUX System Timer and MT6795 compatible
...
Load-balancing improvements:
============================
- Improve NUMA balancing on AMD Zen systems for affine workloads.
- Improve the handling of reduced-capacity CPUs in load-balancing.
- Energy Model improvements: fix & refine all the energy fairness metrics (PELT),
and remove the conservative threshold requiring 6% energy savings to
migrate a task. Doing this improves power efficiency for most workloads,
and also increases the reliability of energy-efficiency scheduling.
- Optimize/tweak select_idle_cpu() to spend (much) less time searching
for an idle CPU on overloaded systems. There's reports of several
milliseconds spent there on large systems with large workloads ...
[ Since the search logic changed, there might be behavioral side effects. ]
- Improve NUMA imbalance behavior. On certain systems
with spare capacity, initial placement of tasks is non-deterministic,
and such an artificial placement imbalance can persist for a long time,
hurting (and sometimes helping) performance.
The fix is to make fork-time task placement consistent with runtime
NUMA balancing placement.
Note that some performance regressions were reported against this,
caused by workloads that are not memory bandwith limited, which benefit
from the artificial locality of the placement bug(s). Mel Gorman's
conclusion, with which we concur, was that consistency is better than
random workload benefits from non-deterministic bugs:
"Given there is no crystal ball and it's a tradeoff, I think it's
better to be consistent and use similar logic at both fork time
and runtime even if it doesn't have universal benefit."
- Improve core scheduling by fixing a bug in sched_core_update_cookie() that
caused unnecessary forced idling.
- Improve wakeup-balancing by allowing same-LLC wakeup of idle CPUs for newly
woken tasks.
- Fix a newidle balancing bug that introduced unnecessary wakeup latencies.
ABI improvements/fixes:
=======================
- Do not check capabilities and do not issue capability check denial messages
when a scheduler syscall doesn't require privileges. (Such as increasing niceness.)
- Add forced-idle accounting to cgroups too.
- Fix/improve the RSEQ ABI to not just silently accept unknown flags.
(No existing tooling is known to have learned to rely on the previous behavior.)
- Depreciate the (unused) RSEQ_CS_FLAG_NO_RESTART_ON_* flags.
Optimizations:
==============
- Optimize & simplify leaf_cfs_rq_list()
- Micro-optimize set_nr_{and_not,if}_polling() via try_cmpxchg().
Misc fixes & cleanups:
======================
- Fix the RSEQ self-tests on RISC-V and Glibc 2.35 systems.
- Fix a full-NOHZ bug that can in some cases result in the tick not being
re-enabled when the last SCHED_RT task is gone from a runqueue but there's
still SCHED_OTHER tasks around.
- Various PREEMPT_RT related fixes.
- Misc cleanups & smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xr2b
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Load-balancing improvements:
- Improve NUMA balancing on AMD Zen systems for affine workloads.
- Improve the handling of reduced-capacity CPUs in load-balancing.
- Energy Model improvements: fix & refine all the energy fairness
metrics (PELT), and remove the conservative threshold requiring 6%
energy savings to migrate a task. Doing this improves power
efficiency for most workloads, and also increases the reliability
of energy-efficiency scheduling.
- Optimize/tweak select_idle_cpu() to spend (much) less time
searching for an idle CPU on overloaded systems. There's reports of
several milliseconds spent there on large systems with large
workloads ...
[ Since the search logic changed, there might be behavioral side
effects. ]
- Improve NUMA imbalance behavior. On certain systems with spare
capacity, initial placement of tasks is non-deterministic, and such
an artificial placement imbalance can persist for a long time,
hurting (and sometimes helping) performance.
The fix is to make fork-time task placement consistent with runtime
NUMA balancing placement.
Note that some performance regressions were reported against this,
caused by workloads that are not memory bandwith limited, which
benefit from the artificial locality of the placement bug(s). Mel
Gorman's conclusion, with which we concur, was that consistency is
better than random workload benefits from non-deterministic bugs:
"Given there is no crystal ball and it's a tradeoff, I think
it's better to be consistent and use similar logic at both fork
time and runtime even if it doesn't have universal benefit."
- Improve core scheduling by fixing a bug in
sched_core_update_cookie() that caused unnecessary forced idling.
- Improve wakeup-balancing by allowing same-LLC wakeup of idle CPUs
for newly woken tasks.
- Fix a newidle balancing bug that introduced unnecessary wakeup
latencies.
ABI improvements/fixes:
- Do not check capabilities and do not issue capability check denial
messages when a scheduler syscall doesn't require privileges. (Such
as increasing niceness.)
- Add forced-idle accounting to cgroups too.
- Fix/improve the RSEQ ABI to not just silently accept unknown flags.
(No existing tooling is known to have learned to rely on the
previous behavior.)
- Depreciate the (unused) RSEQ_CS_FLAG_NO_RESTART_ON_* flags.
Optimizations:
- Optimize & simplify leaf_cfs_rq_list()
- Micro-optimize set_nr_{and_not,if}_polling() via try_cmpxchg().
Misc fixes & cleanups:
- Fix the RSEQ self-tests on RISC-V and Glibc 2.35 systems.
- Fix a full-NOHZ bug that can in some cases result in the tick not
being re-enabled when the last SCHED_RT task is gone from a
runqueue but there's still SCHED_OTHER tasks around.
- Various PREEMPT_RT related fixes.
- Misc cleanups & smaller fixes"
* tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
rseq: Kill process when unknown flags are encountered in ABI structures
rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_* flags
sched/core: Fix the bug that task won't enqueue into core tree when update cookie
nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt()
sched/core: Always flush pending blk_plug
sched/fair: fix case with reduced capacity CPU
sched/core: Use try_cmpxchg in set_nr_{and_not,if}_polling
sched/core: add forced idle accounting for cgroups
sched/fair: Remove the energy margin in feec()
sched/fair: Remove task_util from effective utilization in feec()
sched/fair: Use the same cpumask per-PD throughout find_energy_efficient_cpu()
sched/fair: Rename select_idle_mask to select_rq_mask
sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util()
sched/fair: Decay task PELT values during wakeup migration
sched/fair: Provide u64 read for 32-bits arch helper
sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg
sched: only perform capability check on privileged operation
sched: Remove unused function group_first_cpu()
sched/fair: Remove redundant word " *"
selftests/rseq: check if libc rseq support is registered
...
global variable, fix comments and rework the trace information
(Lukasz Luba)
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn)
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3 (Wolfram
Sang)
- Convert the QCom tsens DT binding to the dtsformat format (Krzysztof
Kozlowski)
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano)
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof)
- Fix array underflow in prep_lookup_table (Dan Carpenter)
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun)
- Fix typos in comments detected on sun8i by Coccinelle (Julia Lawall)
- Fix typos in comments on rzg2l (Biju Das)
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li)
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov)
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer)
- Fix typo in the comments for the 'tmon' tool (Slark Xiao)
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to be
used by the different sensors when registering a thermal zone
(Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmLkDEgACgkQqDIjiipP
6E9PPAf/fZRYgzqgv68lYy2hnJBZEha7z76KyKKxbPATy65VQHzHBqWyPgOnZWx8
xm26tlDJMFEGql/Sy5QetvnFdDqvY33Q0FBhDbmCdCp7vxxirDNKxXhGnxUggCIt
PrloMzC9zjgdNaFTclf/ceCFNwHPnY8l5kxGHhVDn/l5vvGFB869HKMT+13FMCQM
cKVNZY0F3BgmY0ouAMbXT2jwNm/FIYfXC9CFaQo9XhiTAvqU1h4BI08S8JdXsve0
VVBi8MB0sBolWIQ/GVlC1IWj1FhxgMfvcfZAOlyia7I4kQz7K5wAHxiHnhA+GHsZ
NdxVeGTIdmjIInvRxnsT7yR2HcitkA==
=sDfh
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for 5.20-rc1 from Daniel Lezcano:
"- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba)
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn)
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3 (Wolfram
Sang)
- Convert the QCom tsens DT binding to the dtsformat format (Krzysztof
Kozlowski)
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano)
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof)
- Fix array underflow in prep_lookup_table (Dan Carpenter)
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun)
- Fix typos in comments detected on sun8i by Coccinelle (Julia Lawall)
- Fix typos in comments on rzg2l (Biju Das)
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li)
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov)
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer)
- Fix typo in the comments for the 'tmon' tool (Slark Xiao)
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to be
used by the different sensors when registering a thermal zone
(Daniel Lezcano)"
* tag 'thermal-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (36 commits)
thermal/of: Initialize trip points separately
thermal/of: Use thermal trips stored in the thermal zone
thermal/core: Add thermal_trip in thermal_zone
thermal/core: Rename 'trips' to 'num_trips'
thermal/core: Move thermal_set_delay_jiffies to static
thermal/core: Remove unneeded EXPORT_SYMBOLS
thermal/of: Move thermal_trip structure to thermal.h
thermal/of: Remove the device node pointer for thermal_trip
thermal/of: Replace device node match with device node search
thermal/core: Remove duplicate information when an error occurs
thermal/core: Avoid calling ->get_trip_temp() unnecessarily
thermal/tools/tmon: Fix typo 'the the' in comment
thermal/tools/tmon: Include pthread and time headers in tmon.h
thermal/ti-soc-thermal: Fix comment typo
thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
thermal/drivers/u8500: Remove unnecessary print function dev_err()
thermal/drivers/rzg2l: Fix comments
thermal/drivers/sun8i: Fix typo in comment
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
...
Merge changes that make the thermal core use ida_alloc()/free()
directly instead of ida_simple_get()/ida_simple_remove() that have been
deprecated.
* thermal-core:
thermal: Directly use ida_alloc()/free()
Self contain the trip initialization from the device tree in a single
function for the sake of making the code flow more clear.
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Link: https://lore.kernel.org/r/20220722200007.1839356-11-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Now that we have the thermal trip stored in the thermal zone in a
generic way, we can rely on them and remove one indirection we found
in the thermal_of code and do one more step forward the removal of the
duplicated structures.
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Link: https://lore.kernel.org/r/20220722200007.1839356-10-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The thermal trip points are properties of a thermal zone and the
different sub systems should be able to save them in the thermal zone
structure instead of having their own definition.
Give the opportunity to the drivers to create a thermal zone with
thermal trips which will be accessible directly from the thermal core
framework.
As we added the thermal trip points structure in the thermal zone,
let's extend the thermal zone register function to have the thermal
trip structures as a parameter and store it in the 'trips' field of
the thermal zone structure.
The thermal zone contains the trip point, we can store them directly
when registering the thermal zone. That will allow another step
forward to remove the duplicate thermal zone structure we find in the
thermal_of code.
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Link: https://lore.kernel.org/r/20220722200007.1839356-9-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In order to use thermal trips defined in the thermal structure, rename
the 'trips' field to 'num_trips' to have the 'trips' field containing the
thermal trip points.
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Link: https://lore.kernel.org/r/20220722200007.1839356-8-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The function 'thermal_set_delay_jiffies' is only used in
thermal_core.c but it is defined and implemented in a separate
file. Move the function to thermal_core.c and make it static.
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220722200007.1839356-7-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Different functions are exporting the symbols but are actually only
used by the thermal framework internals. Remove these EXPORT_SYMBOLS.
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Link: https://lore.kernel.org/r/20220722200007.1839356-6-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The structure thermal_trip is now generic and will be usable by the
different sensor drivers in place of their own structure.
Move its definition to thermal.h to make it accessible.
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220722200007.1839356-5-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The device node pointer is no longer needed in the thermal trip
structure, remove it.
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220722200007.1839356-4-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The thermal_of code builds a trip array associated with the node
pointer in order to compare the trip point phandle with the list.
The thermal trip is a thermal zone property and should be moved
there. If some sensors have hardcoded trip points, they should use the
exported structure instead of redefining again and again their own
structure and data to describe exactly the same things.
In order to move this to the thermal.h header and allow more cleanup,
we need to remove the node pointer from the structure.
Instead of building storing the device node, we search directly in the
device tree the corresponding node. That results in a simplification
of the code and allows to move the structure to thermal.h
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Link: https://lore.kernel.org/r/20220722200007.1839356-3-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The pr_err already tells it is an error, it is pointless to add the
'Error:' string in the messages. Remove them.
Cc: Alexandre Bailon <abailon@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220722200007.1839356-2-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
As the trip temperature is already available when calling the function
handle_critical_trips(), pass it as a parameter instead of having this
function calling the ops again to retrieve the same data.
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220718145038.1114379-2-daniel.lezcano@linaro.org
Register thermal zones as hwmon sensors to let userspace read
temperatures using standard hwmon interface.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20220719054940.755907-2-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Register thermal zones as hwmon sensors to let userspace read
temperatures using standard hwmon interface.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20220719054940.755907-1-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Eliminate the follow coccicheck warnings:
./drivers/thermal/db8500_thermal.c:162:2-9: line 162 is redundant because platform_get_irq() already prints an error
./drivers/thermal/db8500_thermal.c:176:2-9: line 176 is redundant because platform_get_irq() already prints an error
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220719003556.74460-1-yang.lee@linux.alibaba.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This patch replaces 'Capture times'->'Total number of ADC data samples' as
the former does not really explain much.
It also fixes the typo
* caliberation->calibration
Lastly, as per the coding style /* should be on a separate line.
This patch fixes this issue.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220718121440.556408-1-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220521111145.81697-36-Julia.Lawall@inria.fr
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Fix sparse warnings:
drivers/thermal/k3_j72xx_bandgap.c:532:36: sparse: sparse: symbol 'k3_j72xx_bandgap_j721e_data' was not declared. Should it be static?
drivers/thermal/k3_j72xx_bandgap.c:536:36: sparse: sparse: symbol 'k3_j72xx_bandgap_j7200_data' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jin Xiaoyun <jinxiaoyun2@huawei.com>
Link: https://lore.kernel.org/r/20220613063111.654893-1-jinxiaoyun2@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This while loop exits with "i" set to -1 and so then it sets:
derived_table[-1] = derived_table[0] - 300;
There is no need for this assignment at all. Just delete it.
Fixes: 72b3fc61c752 ("thermal: k3_j72xx_bandgap: Add the bandgap driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YoetjwcOEzYEFp9b@kili
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
If an error occurs in the k3_j72xx_bandgap_probe() function the memory
allocated to the 'ref_table' will not be released.
Add a err_free_ref_table step to the error path to free 'ref_table'
Fixes: 72b3fc61c752 ("thermal: k3_j72xx_bandgap: Add the bandgap driver support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/r/20220525213617.30002-1-bb@ti.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The trends DROP_FULL and RAISE_FULL are not used and were never used
in the past AFAICT. Remove these conditions as they seems to not be
handled anywhere.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220629151012.3115773-2-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The code is actually clampling the next cooling device state using the
lowest and highest states of the thermal instance.
That code can be replaced by the clamp() macro which does exactly the
same. It results in a simpler routine to read.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220629151012.3115773-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The get_trend function relies on the interrupt to set the raising or
dropping trend. However the interpolated temperature is already giving
the temperature information to the thermal framework which is able to
deduce the trend.
Remove the trend code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220616202537.303655-3-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The get_trend function does already what the generic framework does.
Remove it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20220616202537.303655-2-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
There is a get_trend function which is a wrapper to call a private
get_trend function. However, this private get_trend function is not
assigned anywhere.
Remove this dead code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Amit Kucheria <amitk@kernel.org>
Link: https://lore.kernel.org/r/20220616202537.303655-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When setting up a new board, a plain "Can't register thermal zone"
didn't help me much because the thermal zones in DT were all fine. I
just had a sensor entry too much in the parent TSC node. Reword the
failure/success messages to contain the sensor number to make it easier
to understand which sensor is affected. Example output now:
rcar_gen3_thermal e6198000.thermal: Sensor 0: Loaded 1 trip points
rcar_gen3_thermal e6198000.thermal: Sensor 1: Loaded 1 trip points
rcar_gen3_thermal e6198000.thermal: Sensor 2: Loaded 1 trip points
rcar_gen3_thermal e6198000.thermal: Sensor 3: Can't register thermal zone
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20220610200500.6727-1-wsa+renesas@sang-engineering.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Remove unneeded global variable devfreq_cooling_ops which is used only
as a copy pattern. Instead, extend the struct devfreq_cooling_device with
the needed ops structure. This also simplifies the allocation/free code
during the setup/cleanup.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220613124327.30766-5-lukasz.luba@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The code has moved and left some comments stale. Update them where
there is a need.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220613124327.30766-4-lukasz.luba@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Simplify the thermal_power_cpu_get_power trace event by removing
complicated cpumask and variable length array. Now the tools parsing trace
output don't have to hassle to get this power data. The simplified format
version uses 'policy->cpu'. Remove also the 'load' information completely
since there is very little value of it in this trace event. To get the
CPUs' load (or utilization) there are other dedicated trace hooks in the
kernel. This patch also simplifies and speeds-up the main cooling code
when that trace event is enabled.
Rename the trace event to avoid confusion of tools which parse the trace
file.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220613124327.30766-3-lukasz.luba@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
It is very unlikely that one CPU cluster would have the EM and some other
won't have it (because EM registration failed or DT lacks needed entry).
Although, we should avoid modifying global variable with callbacks anyway.
Redesign this and add safety for such situation.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220613124327.30766-2-lukasz.luba@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Walleij)
- Fix grammar typo in the ARM global timer Kconfig option (Randy
Dunlap)
- Add the tegra186 timer and use it on the tegra234 board (Thierry
Reding)
- Add the 'CPUXGPT' CPU timer for Mediatek MT6795 and implement a
workaround to overcome an ATF bug where the timer is not correctly
initialized (AngeloGioacchino Del Regno)
- Rework the suspend/resume approach to enable the feature on the
timer even it is not an active clock and fix a compilation warning
(Claudiu Beznea)
- Add the Add R-Car Gen4 timer support along with the DT bindings
(Wolfram Sang)
- Add compatible for ti,am654-timer to support AM6 SoC (Tony Lindgren)
- Fix Kconfig option to put it back to 'bool' instead of 'tristate'
for the tegra186 (Daniel Lezcano)
- Sort 'family,type' DT bindings for the Renesas timers (Geert
Uytterhoeven)
- Add compatible 'allwinner,sun20i-d1-timer' for Allwinner D1 (Samuel
Holland)
- Remove unnecessary (void*) conversions for sun4i (XU pengfei)
- Remove unnecessary (void*) conversions for sun5i (Li zeming)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmLhWF0ACgkQqDIjiipP
6E+ziAgArY8BJ/09w4rt63LDO5nynorr0+Uuf0E9hCmc0KzRsSF3hO39EcuLj1zD
ubKKSXwaOucAcRYj7gCeqaSk/IOs9EmwESRVtLLIwEwYsg44iC1vmq4pJ8cX66qN
h5TqkOiq77fPIY3BR/nSFxddmlU2farO8oSUqdLNsVrqoIq2rttaQYADdYGa4LYn
dvQHEmh6jvJRoZM3aR6It0EWM7pyHKxAWFChWv+SbikheDCgIcugz+FUTy9lyhmf
39wLm2srmrCLbjaGdJnyc38/y/UPIJ0aqeSf7XSiHTWQ+dfNBfdbrmPTSJHiyIt+
iPrlx0ShvrMXeOxgbSxse53e+9Q88w==
=ApcN
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.20-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/source updates from Daniel Lezcano:
- Add the missing DT bindings for the MTU nomadik timer (Linus
Walleij)
- Fix grammar typo in the ARM global timer Kconfig option (Randy
Dunlap)
- Add the tegra186 timer and use it on the tegra234 board (Thierry
Reding)
- Add the 'CPUXGPT' CPU timer for Mediatek MT6795 and implement a
workaround to overcome an ATF bug where the timer is not correctly
initialized (AngeloGioacchino Del Regno)
- Rework the suspend/resume approach to enable the feature on the
timer even it is not an active clock and fix a compilation warning
(Claudiu Beznea)
- Add the Add R-Car Gen4 timer support along with the DT bindings
(Wolfram Sang)
- Add compatible for ti,am654-timer to support AM6 SoC (Tony Lindgren)
- Fix Kconfig option to put it back to 'bool' instead of 'tristate'
for the tegra186 (Daniel Lezcano)
- Sort 'family,type' DT bindings for the Renesas timers (Geert
Uytterhoeven)
- Add compatible 'allwinner,sun20i-d1-timer' for Allwinner D1 (Samuel
Holland)
- Remove unnecessary (void*) conversions for sun4i (XU pengfei)
- Remove unnecessary (void*) conversions for sun5i (Li zeming)
Link: https://lore.kernel.org/all/7472984e-f502-5f27-82bf-070127dd85a5@linaro.org
If ACPI_FADT_LOW_POWER_S0 is not set, this doesn't mean that low-power
S0 idle is not usable. It merely means that using S3 on the given
system is more beneficial from the energy saving perspective than using
low-power S0 idle, as long as S3 is supported.
Suspend-to-idle is still a valid suspend mode if ACPI_FADT_LOW_POWER_S0
is not set and the pm_suspend_via_firmware() check in pch_wpt_suspend()
is sufficient to distinguish suspend-to-idle from S3, so drop the
confusing ACPI_FADT_LOW_POWER_S0 check.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
The milli-Watts precision causes rounding errors while calculating
efficiency cost for each OPP. This is especially visible in the 'simple'
Energy Model (EM), where the power for each OPP is provided from OPP
framework. This can cause some OPPs to be marked inefficient, while
using micro-Watts precision that might not happen.
Update all EM users which access 'power' field and assume the value is
in milli-Watts.
Solve also an issue with potential overflow in calculation of energy
estimation on 32bit machine. It's needed now since the power value
(thus the 'cost' as well) are higher.
Example calculation which shows the rounding error and impact:
power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz
power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000
power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18
power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961
power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21
max_freq = 2000MHz
cost_a_mW = 18 * 2000MHz/500MHz = 72
cost_a_uW = 18000 * 2000MHz/500MHz = 72000
cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better
cost_b_uW = 21961 * 2000MHz/600MHz = 73203
The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly
better that the 'cost_b_uW' (this patch uses micro-Watts) and such
would have impact on the 'inefficient OPPs' information in the Cpufreq
framework. This patch set removes the rounding issue.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is an unexpected word 'is' in a comments that need to be dropped
file: ./drivers/thermal/intel/x86_pkg_temp_thermal.c
line: 108
* tj-max is is interesting because threshold is set relative to this
changed to:
* tj-max is interesting because threshold is set relative to this
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new CPU ID to the list of supported processors in the
intel_tcc_cooling driver (Sumeet Pawnikar).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmK/TzESHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxwPcQALCM2DfwhD+6lvO2bc0e8gAVYRPwekfa
dZYK6e+b2HBnekzGOpOCSF58qB8jd4hxk2ODJ7RXUSkvtNfLXVDTotZ74Ggr0WN3
JSoSW4OTpds844HiMzaal1WOxc6DEWydCPliSryqyPYLjyxMJjFd/sfsSJRSANs1
q7ySDj+qdSNzSrsFkJ5Ia+W687lBFG3AJBOQ65Fuh8sfJDVsPOcyaWKYcdXUYZVn
bPNm7ll9EWYUYE8lAgWHTgH/keIYTMnyJbfcmqLXfp0jiYAfyKm4559Rf0YiCSX9
Hix5cvhlLBK7exHE7IUBY8k5pC1UxhIWUBlWf96vxGz3XY4hMgXaWUp6w/MOFjqa
ht3aobhvtPv6a3rzCpH3pZTLHuoILwR9pH7kq5aE562K687m2T9vsP+Wvn/5Oj7d
OmThKDuqeWq6FuVsTvBvBFHRtVZ+olUPx0R9aKhFtFDH1bxjwRXX0uEHQu12M8Ww
QwgRmkSSJeCd+iBtSjMXorCS5vjztCQDPZgvD8xH3sg0G5f9Ha/QHJbbpDUv2TaC
P6nghyqeFla8EA21Xg973UxJaajfnal2/FIDmBvoyEhLoQ5M5hs06QjIaY3HA9Js
zNI/4qjLfTR7HZoCy4CDttSA0pgdCHRfNY673QfN6F7sO5kZn9FGJPp7F/qsruO6
3f5kh/HcmQpy
=F4yU
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Add a new CPU ID to the list of supported processors in the
intel_tcc_cooling driver (Sumeet Pawnikar)"
* tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake
Add RaptorLake to the list of processor models supported by the Intel
TCC cooling driver.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
[ rjw: Subject edits, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
effective_cpu_util() already has a `int cpu' parameter which allows to
retrieve the CPU capacity scale factor (or maximum CPU capacity) inside
this function via an arch_scale_cpu_capacity(cpu).
A lot of code calling effective_cpu_util() (or the shim
sched_cpu_util()) needs the maximum CPU capacity, i.e. it will call
arch_scale_cpu_capacity() already.
But not having to pass it into effective_cpu_util() will make the EAS
wake-up code easier, especially when the maximum CPU capacity reduced
by the thermal pressure is passed through the EAS wake-up functions.
Due to the asymmetric CPU capacity support of arm/arm64 architectures,
arch_scale_cpu_capacity(int cpu) is a per-CPU variable read access via
per_cpu(cpu_scale, cpu) on such a system.
On all other architectures it is a a compile-time constant
(SCHED_CAPACITY_SCALE).
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-4-vdonnefort@google.com
Use ida_alloc()/ida_free() instead of deprecated
ida_simple_get()/ida_simple_remove() as recommended.
Signed-off-by: keliu <liuke94@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add Meteor Lake PCI device ID to the int340x thermal control
driver (Sumeet Pawnikar).
-----BEGIN PGP SIGNATURE-----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=lIzD
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull additional thermal control update from Rafael Wysocki:
"Add Meteor Lake PCI device ID to the int340x thermal control driver
(Sumeet Pawnikar)"
* tag 'thermal-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add Meteor Lake PCI device ID
Add Meteor Lake PCI ID for processor thermal device.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register() when
device_register() fails by calling thermal_cooling_device_destroy_sysfs()
(Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params (Corentin
Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver and
document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai).
-----BEGIN PGP SIGNATURE-----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=3ltV
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a thermal library and thermal tools to wrap the netlink
interface into event-based callbacks, improve overheat condition
handling during suspend-to-idle on Intel SoCs, add some new hardware
support, fix bugs and clean up code.
Specifics:
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register()
when device_register() fails by calling
thermal_cooling_device_destroy_sysfs() (Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params
(Corentin Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver
and document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai)"
* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
thermal: intel: pch: improve the cooling delay log
thermal: intel: pch: enhance overheat handling
thermal: intel: pch: move cooling delay to suspend_noirq phase
PM: wakeup: expose pm_wakeup_pending to modules
thermal: k3_j72xx_bandgap: Add the bandgap driver support
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
dt-bindings: thermal: tsens: Add sc8280xp compatible
dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
thermal/drivers/qcom/lmh: Add sc8180x compatible
thermal/drivers/rz2gl: Fix OTP Calibration Register values
dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
thermal: thermal_of: fix typo on __thermal_bind_params
tools/thermal: remove unneeded semicolon
tools/lib/thermal: remove unneeded semicolon
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
tools/thermal: Add thermal daemon skeleton
tools/thermal: Add a temperature capture tool
tools/thermal: Add util library
...
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
