HW_ID_MAX considers HWID of all IPs, far more than what amdgpu uses.
amdgpu tracks only the IPs defined by amd_hw_ip_block_type whose max
is MAX_HWIP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no base reg offset or ip_version set for SDMA2
and SDMA3 on SIENNA_CICHLID, so add them.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:503:6: warning: no previous prototype for function 'release_psp_cmd_buf' [-Wmissing-prototypes]
void release_psp_cmd_buf(struct psp_context *psp)
^
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:503:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void release_psp_cmd_buf(struct psp_context *psp)
^
static
1 warning generated.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IH ring1 is used to process GPU retry fault, overflow is enabled to
drain retry fault because we want receive other interrupts while
handling retry fault to recover range. There is no overflow flag set
when wptr pass rptr. Use timestamp of rptr and wptr to handle overflow
and drain retry fault.
If fault timestamp goes backward, the fault is filtered and should not
be processed. Drain fault is finished if processed_timestamp is equal to
or larger than checkpoint timestamp.
Add amdgpu_ih_functions interface decode_iv_ts for different chips to
get timestamp from IV entry with different iv size and timestamp offset.
amdgpu_ih_decode_iv_ts_helper is used for vega10, vega20, navi10.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
still need call ras_disable_all_featrures to handle
ras initilization failure case.
Function amdgpu_device_fini_hw is called before amdgpu_device_fini_sw,
so ras ta will unload before send ras disable command, ras dsiable operation
must before hw fini.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since vkms support atomic KMS interface
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <aleander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
otherwise adev->mode_info.crtcs[] is NULL
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
for sriov odd# vf will modify vcn0 engine ip revision(due to multimedia bandwidth feature),
which will be mismatched with original vcn0 revision
[HOW]
add new version check for vcn0 disabled revision(3, 0, 192), typically modified under
sriov mode
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the bios scratch register when updating the backlight
level. Some platforms apparently read this scratch register
and do additional operations in their hotkey handlers.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1518
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need for additional programming, keep the default settings.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix some byteorder issues about amdgpu discovery.
This will result in running errors on the big end system. (e.g:MIPS)
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If xnack is on, VM retry fault interrupt send to IH ring1, and ring1
will be full quickly. IH cannot receive other interrupts, this causes
deadlock if migrating buffer using sdma and waiting for sdma done
while handling retry fault.
Remove VMC from IH storm client, enable ring1 write pointer
overflow, then IH will drop retry fault interrupts and be able to receive
other interrupts while driver is handling retry fault.
IH ring1 write pointer doesn't writeback to memory by IH, and ring1
write pointer recorded by self-irq is not updated, so always read
the latest ring1 write pointer from register.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By default this timestamp is 32 bit counter. It gets overflowed in
around 10 minutes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise when IH process restart, count is zero, the loop will
not exit to wake_up_all after processing AMDGPU_IH_MAX_NUM_IVS
interrupts.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After switching to generic framebuffer framework, we rely on the
->dumb_create routine for frame buffer creation. However, the
different domain flags used are not optimal. Add the contiguous
flag to directly allocate the scanout BO as one linear buffer.
Fixes: 087451f372 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes warning report from kernel test robot
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir and newer gfx9 APUs have new TSC register that is
not part of the gfxoff tile, so it can be read without
needing to disable gfx off.
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply the same check we do for dGPUs for APUs as well.
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 9f4f2c1a35 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
For sriov XGMI configuration, the host driver will handle the hive reset,
so in guest side, the reset_sriov only be called once on one device. This will
make kfd post_reset unblanced with kfd pre_reset since kfd pre_reset already
been moved out of reset_sriov function. Move kfd post_reset out of reset_sriov
function to make them balance .
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_amdkfd_gpuvm_free_memory_of_gpu drop dmabuf reference increased in
amdgpu_gem_prime_export.
amdgpu_bo_destroy drop dmabuf reference increased in
amdgpu_gem_prime_import.
So remove this extra dma_buf_put to avoid double free.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Tested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable HDP register remapping on SRIOV and set rmmio_remap.reg_offset
to the fixed address of the VF register for hdp_v*_flush_hdp.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if smu support ECCTABLE, driver can message smu to get ecc_table
then query umc error info from ECCTABLE
v2:
optimize source code makes logical more reasonable
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable vblanks immediately to save power. I think this was
missed when we merged DC support.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1781
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed
There is a potential memleak if not call kobject_put.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change is to remove useless break after return.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix race condition failure during UMC UE injection.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMIO/DOORBELL BOs encode control data and should be pinned in GTT
domain before enabling PCIe connected peer devices in accessing it
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Accounting system to track amount of available memory (system, TTM
and VRAM of a device) relies on BO's domain. The change is to rely
instead on allocation flag indicating BO type - VRAM, GTT, USERPTR,
MMIO or DOORBELL
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver initialization is driven by IP version from IP
discovery table. So add error print when failing to add
ip block during driver initialization, this will be more
friendly to user to know which IP version is not correct.
[ 40.467361] [drm] host supports REQ_INIT_DATA handshake
[ 40.474076] [drm] add ip block number 0 <nv_common>
[ 40.474090] [drm] add ip block number 1 <gmc_v10_0>
[ 40.474101] [drm] add ip block number 2 <psp>
[ 40.474103] [drm] add ip block number 3 <navi10_ih>
[ 40.474114] [drm] add ip block number 4 <smu>
[ 40.474119] [drm] add ip block number 5 <amdgpu_vkms>
[ 40.474134] [drm] add ip block number 6 <gfx_v10_0>
[ 40.474143] [drm] add ip block number 7 <sdma_v5_2>
[ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init
[ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device.
v2: use dev_err to multi-GPU system
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These get funcs simply return an adev field. Replace funcs/calls with
direct field accesses instead.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We set WC memtype for aper_base but don't check return value
of arch_io_reserve_memtype_wc(). Be more defensive and return
early on error.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ttm_backend_bind() only needed for TTM_PL_TT
and AMDGPU_PL_PREEMPT.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the shadow buffer support from generic framebuffer emulation, it's
possible now to have runpm kicked when no update for console.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Completes removal of kgd_dev. Direct references to amdgpu_device objects
should now be used instead.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove get_amdgpu_device and other remaining kgd_dev references aside
from declaration/kfd struct entry and initialization.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static funcs in amdgpu_amdkfd_gfx_v10_3.c now using amdgpu_device.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static funcs in amdgpu_amdkfd_gfx_v10.c now using amdgpu_device.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static funcs in amdgpu_amdkfd_gfx_v9.c now using amdgpu_device.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static funcs in amdgpu_amdkfd_gfx_v8.c now using amdgpu_device.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
