Pull x86 irq entry updates from Thomas Gleixner:
"The irq stack switching was moved out of the ASM entry code in course
of the entry code consolidation. It ended up being suboptimal in
various ways.
This reworks the X86 irq stack handling:
- Make the stack switching inline so the stackpointer manipulation is
not longer at an easy to find place.
- Get rid of the unnecessary indirect call.
- Avoid the double stack switching in interrupt return and reuse the
interrupt stack for softirq handling.
- A objtool fix for CONFIG_FRAME_POINTER=y builds where it got
confused about the stack pointer manipulation"
* tag 'x86-entry-2021-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix stack-swizzle for FRAME_POINTER=y
um: Enforce the usage of asm-generic/softirq_stack.h
x86/softirq/64: Inline do_softirq_own_stack()
softirq: Move do_softirq_own_stack() to generic asm header
softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig
x86: Select CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
x86/softirq: Remove indirection in do_softirq_own_stack()
x86/entry: Use run_sysvec_on_irqstack_cond() for XEN upcall
x86/entry: Convert device interrupts to inline stack switching
x86/entry: Convert system vectors to irq stack macro
x86/irq: Provide macro for inlining irq stack switching
x86/apic: Split out spurious handling code
x86/irq/64: Adjust the per CPU irq stack pointer by 8
x86/irq: Sanitize irq stack tracking
x86/entry: Fix instrumentation annotation
Pull sparc updates from David Miller:
"A host of mall cleanups and adjustments that have accumulated while I
was away, nothing major"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: (26 commits)
sparc: make xchg() into a statement expression
sparc64: Use arch_validate_flags() to validate ADI flag
sparc32: Fix comparing pointer to 0 coccicheck warning
sparc: fix led.c driver when PROC_FS is not enabled
sparc: Fix handling of page table constructor failure
sparc64: only select COMPAT_BINFMT_ELF if BINFMT_ELF is set
tty: hvcs: Drop unnecessary if block
tty: vcc: Drop unnecessary if block
tty: vcc: Drop impossible to hit WARN_ON
sparc: sparc64_defconfig: add necessary configs for qemu
sparc64: switch defconfig from the legacy ide driver to libata
sparc32: Preserve clone syscall flags argument for restarts due to signals
sparc32: Limit memblock allocation to low memory
sparc: Replace test_ti_thread_flag() with test_tsk_thread_flag()
sbus: char: Remove meaningless jump label out_free
sparc32: signal: Fix stack trampoline for RT signals
sparc: remove SA_STATIC_ALLOC macro definition
sparc: use for_each_child_of_node() macro
sparc: Use fallthrough pseudo-keyword
sparc32: srmmu: improve type safety of __nocache_fix()
...
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
Pull tlb gather updates from Ingo Molnar:
"Theses fix MM (soft-)dirty bit management in the procfs code & clean
up the TLB gather API"
* tag 'core-mm-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Use tlb_gather_mmu_fullmm() when freeing LDT page-tables
tlb: arch: Remove empty __tlb_remove_tlb_entry() stubs
tlb: mmu_gather: Remove start/end arguments from tlb_gather_mmu()
tlb: mmu_gather: Introduce tlb_gather_mmu_fullmm()
tlb: mmu_gather: Remove unused start/end arguments from tlb_finish_mmu()
mm: proc: Invalidate TLB after clearing soft-dirty page state
Fix several of the same warning by using a GCC statement expression
(extension):
../arch/sparc/include/asm/cmpxchg_32.h:28:22: warning: value computed is not used [-Wunused-value]
28 | #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
Passes sparc32 allmodconfig with no xchg warnings.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
When userspace calls mprotect() to enable ADI on an address range,
do_mprotect_pkey() calls arch_validate_prot() to validate new
protection flags. arch_validate_prot() for sparc looks at the first
VMA associated with address range to verify if ADI can indeed be
enabled on this address range. This has two issues - (1) Address
range might cover multiple VMAs while arch_validate_prot() looks at
only the first VMA, (2) arch_validate_prot() peeks at VMA without
holding mmap lock which can result in race condition.
arch_validate_flags() from commit c462ac288f ("mm: Introduce
arch_validate_flags()") allows for VMA flags to be validated for all
VMAs that cover the address range given by user while holding mmap
lock. This patch updates sparc code to move the VMA check from
arch_validate_prot() to arch_validate_flags() to fix above two
issues.
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are NOT exported to userspace.
The headers listed in arch/sparc/include/uapi/asm/Kbuild are exported.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge in the recent paravirt changes to resolve conflicts caused
by objtool annotations.
Conflicts:
arch/x86/xen/xen-asm.S
Signed-off-by: Ingo Molnar <mingo@kernel.org>
include/asm-generic/qrwlock.h was trying to get arch_spin_is_locked via
asm-generic/qspinlock.h. However, this does not work because architectures
might be using queued rwlocks but not queued spinlocks (csky), or because they
might be defining their own queued_* macros before including asm/qspinlock.h.
To fix this, ensure that asm/spinlock.h always includes qrwlock.h after
defining arch_spin_is_locked (either directly for csky, or via
asm/qspinlock.h for other architectures). The only inclusion elsewhere
is in kernel/locking/qrwlock.c. That one is really unnecessary because
the file is only compiled in SMP configurations (config QUEUED_RWLOCKS
depends on SMP) and in that case linux/spinlock.h already includes
asm/qrwlock.h if needed, via asm/spinlock.h.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Waiman Long <longman@redhat.com>
Fixes: 26128cb6c7 ("locking/rwlocks: Add contention detection for rwlocks")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ben Gardon <bgardon@google.com>
[Add arch/sparc and kernel/locking parts per discussion with Waiman. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To prepare for inlining do_softirq_own_stack() replace
__ARCH_HAS_DO_SOFTIRQ with a Kconfig switch and select it in the affected
architectures.
This allows in the next step to move the function prototype and the inline
stub into a seperate asm-generic header file which is required to avoid
include recursion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.181713427@linutronix.de
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
"This sits on top of of the core entry/exit and x86 entry branch from
the tip tree, which contains the generic and x86 parts of this work.
Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.
With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
signal.c, and also remove a deadlock work-around in io_uring around
knowing that signal based task_work waking is invoked with the sighand
wait queue head lock.
The motivation for this work is to decouple signal notify based
task_work, of which io_uring is a heavy user of, from sighand. The
sighand lock becomes a huge contention point, particularly for
threaded workloads where it's shared between threads. Even outside of
threaded applications it's slower than it needs to be.
Roman Gershman <romger@amazon.com> reported that his networked
workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
spent hammering on the sighand lock, showing 57% of the CPU time there
[1].
There are further cleanups possible on top of this. One example is
TIF_PATCH_PENDING, where a patch already exists to use
TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
consolidation, but the work stands on its own as well"
[1] https://github.com/axboe/liburing/issues/215
* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
io_uring: remove 'twa_signal_ok' deadlock work-around
kernel: remove checking for TIF_NOTIFY_SIGNAL
signal: kill JOBCTL_TASK_WORK
io_uring: JOBCTL_TASK_WORK is no longer used by task_work
task_work: remove legacy TWA_SIGNAL path
sparc: add support for TIF_NOTIFY_SIGNAL
riscv: add support for TIF_NOTIFY_SIGNAL
nds32: add support for TIF_NOTIFY_SIGNAL
ia64: add support for TIF_NOTIFY_SIGNAL
h8300: add support for TIF_NOTIFY_SIGNAL
c6x: add support for TIF_NOTIFY_SIGNAL
alpha: add support for TIF_NOTIFY_SIGNAL
xtensa: add support for TIF_NOTIFY_SIGNAL
arm: add support for TIF_NOTIFY_SIGNAL
microblaze: add support for TIF_NOTIFY_SIGNAL
hexagon: add support for TIF_NOTIFY_SIGNAL
csky: add support for TIF_NOTIFY_SIGNAL
openrisc: add support for TIF_NOTIFY_SIGNAL
sh: add support for TIF_NOTIFY_SIGNAL
um: add support for TIF_NOTIFY_SIGNAL
...
Pull asm-generic mmu-context cleanup from Arnd Bergmann:
"This is a cleanup series from Nicholas Piggin, preparing for later
changes. The asm/mmu_context.h header are generalized and common code
moved to asm-gneneric/mmu_context.h.
This saves a bit of code and makes it easier to change in the future"
* tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits)
h8300: Fix generic mmu_context build
m68k: mmu_context: Fix Sun-3 build
xtensa: use asm-generic/mmu_context.h for no-op implementations
x86: use asm-generic/mmu_context.h for no-op implementations
um: use asm-generic/mmu_context.h for no-op implementations
sparc: use asm-generic/mmu_context.h for no-op implementations
sh: use asm-generic/mmu_context.h for no-op implementations
s390: use asm-generic/mmu_context.h for no-op implementations
riscv: use asm-generic/mmu_context.h for no-op implementations
powerpc: use asm-generic/mmu_context.h for no-op implementations
parisc: use asm-generic/mmu_context.h for no-op implementations
openrisc: use asm-generic/mmu_context.h for no-op implementations
nios2: use asm-generic/mmu_context.h for no-op implementations
nds32: use asm-generic/mmu_context.h for no-op implementations
mips: use asm-generic/mmu_context.h for no-op implementations
microblaze: use asm-generic/mmu_context.h for no-op implementations
m68k: use asm-generic/mmu_context.h for no-op implementations
ia64: use asm-generic/mmu_context.h for no-op implementations
hexagon: use asm-generic/mmu_context.h for no-op implementations
csky: use asm-generic/mmu_context.h for no-op implementations
...
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
Sparc64 has non-pagetable aligned large page support; wire up the
pXX_leaf_size() functions to report the correct pagetable page size.
This enables PERF_SAMPLE_{DATA,CODE}_PAGE_SIZE to report accurate
pagetable leaf sizes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201126121121.301768209@infradead.org
Pull compat quotactl cleanups from Al Viro:
"More Christoph's compat cleanups: quotactl(2)"
* 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
quota: simplify the quotactl compat handling
compat: add a compat_need_64bit_alignment_fixup() helper
compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h>
lift the compat_s64 and compat_u64 definitions into common code using the
COMPAT_FOR_U64_ALIGNMENT symbol for the x86 special case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This macro is not exposed to uapi and is unreferenced in the
kernel. The last reference to it was removed in commit 4c6773c395
("sparc32,leon: add support for extended interrupt controller"),
so remove the definition.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
... and get rid of zeroing the target, etc. on fault.
All exception handlers merge into one; moreover, since we are not
calling lookup_fault() anymore, we don't need the magic with passing
arguments for it from the page fault handler.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All callers of these primitives will
* discard anything we might've copied in case of error
* ignore the csum value in case of error
* always pass 0xffffffff as the initial sum, so the
resulting csum value (in case of success, that is) will never be 0.
That suggest the following calling conventions:
* don't pass err_ptr - just return 0 on error.
* don't bother with zeroing destination, etc. in case of error
* don't pass the initial sum - just use 0xffffffff.
This commit does the minimal conversion in the instances of csum_and_copy_...();
the changes of actual asm code behind them are done later in the series.
Note that this asm code is often shared with csum_partial_copy_nocheck();
the difference is that csum_partial_copy_nocheck() passes 0 for initial
sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are
free to pass 0xffffffff in all cases and subsequent patches will use that
freedom without any special comments.
A part that could be split off: parisc and uml/i386 claimed to have
csum_and_copy_to_user() instances of their own, but those were identical
to the generic one, so we simply drop them. Not sure if it's worth
a separate commit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's always 0. Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.
However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
quite a few architectures have the same csum_partial_copy_nocheck() -
simply memcpy() the data and then return the csum of the copy.
hexagon, parisc, ia64, s390, um: explicitly spelled out that way.
arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32,
nios2, openrisc, riscv, unicore32: end up picking the same thing spelled
out in lib/checksum.h (with varying amounts of perversions along the way).
everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc,
sh, sparc, x86, xtensa) have non-generic variants. For all except c6x
the declaration is in their asm/checksum.h. c6x uses the wrapper
from asm-generic/checksum.h that would normally lead to the lib/checksum.h
instance, but in case of c6x we end up using an asm function from arch/c6x
instead.
Screw that mess - have architectures with private instances define
_HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default
one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY
*not* defined.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull fork cleanups from Christian Brauner:
"This is cleanup series from when we reworked a chunk of the process
creation paths in the kernel and switched to struct
{kernel_}clone_args.
High-level this does two main things:
- Remove the double export of both do_fork() and _do_fork() where
do_fork() used the incosistent legacy clone calling convention.
Now we only export _do_fork() which is based on struct
kernel_clone_args.
- Remove the copy_thread_tls()/copy_thread() split making the
architecture specific HAVE_COYP_THREAD_TLS config option obsolete.
This switches all remaining architectures to select
HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling
convention. The current split makes the process creation codepaths
more convoluted than they need to be. Each architecture has their own
copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it
has a copy_thread_tls() function.
The split is not needed anymore nowadays, all architectures support
CLONE_SETTLS but quite a few of them never bothered to select
HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread()
and use the old calling convention. Removing this split cleans up the
process creation codepaths and paves the way for implementing clone3()
on such architectures since it requires the copy_thread_tls() calling
convention.
After having made each architectures support copy_thread_tls() this
series simply renames that function back to copy_thread(). It also
switches all architectures that call do_fork() directly over to
_do_fork() and the struct kernel_clone_args calling convention. This
is a corollary of switching the architectures that did not yet support
it over to copy_thread_tls() since do_fork() is conditional on not
supporting copy_thread_tls() (Mostly because it lacks a separate
argument for tls which is trivial to fix but there's no need for this
function to exist.).
The do_fork() removal is in itself already useful as it allows to to
remove the export of both do_fork() and _do_fork() we currently have
in favor of only _do_fork(). This has already been discussed back when
we added clone3(). The legacy clone() calling convention is - as is
probably well-known - somewhat odd:
#
# ABI hall of shame
#
config CLONE_BACKWARDS
config CLONE_BACKWARDS2
config CLONE_BACKWARDS3
that is aggravated by the fact that some architectures such as sparc
follow the CLONE_BACKWARDSx calling convention but don't really select
the corresponding config option since they call do_fork() directly.
So do_fork() enforces a somewhat arbitrary calling convention in the
first place that doesn't really help the individual architectures that
deviate from it. They can thus simply be switched to _do_fork()
enforcing a single calling convention. (I really hope that any new
architectures will __not__ try to implement their own calling
conventions...)
Most architectures already have made a similar switch (m68k comes to
mind).
Overall this removes more code than it adds even with a good portion
of added comments. It simplifies a chunk of arch specific assembly
either by moving the code into C or by simply rewriting the assembly.
Architectures that have been touched in non-trivial ways have all been
actually boot and stress tested: sparc and ia64 have been tested with
Debian 9 images. They are the two architectures which have been
touched the most. All non-trivial changes to architectures have seen
acks from the relevant maintainers. nios2 with a custom built
buildroot image. h8300 I couldn't get something bootable to test on
but the changes have been fairly automatic and I'm sure we'll hear
people yell if I broke something there.
All other architectures that have been touched in trivial ways have
been compile tested for each single patch of the series via git rebase
-x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested
even though they have just been trivially touched (removal of the
HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are
basically "core architectures" and since it is trivial to get your
hands on a useable image"
* tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
arch: rename copy_thread_tls() back to copy_thread()
arch: remove HAVE_COPY_THREAD_TLS
unicore: switch to copy_thread_tls()
sh: switch to copy_thread_tls()
nds32: switch to copy_thread_tls()
microblaze: switch to copy_thread_tls()
hexagon: switch to copy_thread_tls()
c6x: switch to copy_thread_tls()
alpha: switch to copy_thread_tls()
fork: remove do_fork()
h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
sparc: unconditionally enable HAVE_COPY_THREAD_TLS
sparc: share process creation helpers between sparc and sparc64
sparc64: enable HAVE_COPY_THREAD_TLS
fork: fold legacy_clone_args_valid() into _do_fork()
The __nocache_fix(VADDR) macro is used to add an offset for pointers and
its "return type" is 'void *'.
We can do better and keep the type information with simply by casting the
return value to (__typeof__(VADDR)).
This will ".. show when those pgd/p4d/pud pointers get mis-used because
they don't end up dropping the type info.."
The addition of the casting to __nocache_fix() also allows to remove
explicit casts at its call sites.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lkml.kernel.org/r/CAHk-=wisORTa7QVPnFqNw9pFs62UiwgsD4C4d=MtYy1o4JPyGQ@mail.gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
This is part of a larger series that aims at getting rid of the
copy_thread()/copy_thread_tls() split that makes the process creation
codepaths in the kernel more convoluted and error-prone than they need
to be.
It also unblocks implementing clone3() on architectures not support
copy_thread_tls(). Any architecture that wants to implement clone3()
will need to select HAVE_COPY_THREAD_TLS and thus need to implement
copy_thread_tls(). So both goals are connected but independently
beneficial.
HAVE_COPY_THREAD_TLS means that a given architecture supports
CLONE_SETTLS and not setting it should usually mean that the
architectures doesn't implement it but that's not how things are. In
fact all architectures support CLONE_TLS it's just that they don't
follow the calling convention that HAVE_COPY_THREAD_TLS implies. That
means all architectures can be switched over to select
HAVE_COPY_THREAD_TLS. Once that is done we can remove that macro (yay,
less code), the unnecessary do_fork() export in kernel/fork.c, and also
rename copy_thread_tls() back to copy_thread(). At this point
copy_thread() becomes the main architecture specific part of process
creation but it will be the same layout and calling convention for all
architectures. (Once that is done we can probably cleanup each
copy_thread() function even more but that's for the future.)
Since sparc does support CLONE_SETTLS there's no reason to not select
HAVE_COPY_THREAD_TLS. This brings us one step closer to getting rid of
the copy_thread()/copy_thread_tls() split we still have and ultimately
the HAVE_COPY_THREAD_TLS define in general. A lot of architectures have
already converted and sparc is one of the few hat haven't yet. This also
unblocks implementing the clone3() syscall on sparc which I will follow
up later (if no one gets there before me). Once that is done we can get
of another ARCH_WANTS_* macro.
This patch just switches sparc64 over to HAVE_COPY_THREAD_TLS but not
sparc32 which will be done in the next patch. Once Any architecture that
supports HAVE_COPY_THREAD_TLS cannot call the do_fork() helper anymore.
This is fine and intended since it should be removed in favor of the
new, cleaner _do_fork() calling convention based on struct
kernel_clone_args. In fact, most architectures have already switched.
With this patch, sparc joins the other arches which can't use the
fork(), vfork(), clone(), clone3() syscalls directly and who follow the
new process creation calling convention that is based on struct
kernel_clone_args which we introduced a while back. This means less
custom assembly in the architectures entry path to set up the registers
before calling into the process creation helper and it is easier to to
support new features without having to adapt calling conventions. It
also unifies all process creation paths between fork(), vfork(),
clone(), and clone3(). (We can't fix the ABI nightmare that legacy
clone() is but we can prevent stuff like this happening in the future.)
Note that sparc can't easily call into the syscalls directly because of
its return value conventions when a new process is created which
needs to clobber the UREG_I1 register in copy_thread{_tls()} and it
needs to restore it if process creation fails. That's not a big deal
since the new process creation calling convention makes things simpler.
This removes sparc_do_fork() and replaces it with 3 clean helpers,
sparc_fork(), sparc_vfork(), and sparc_clone(). That means a little more
C code until the next patch unifies sparc 32bit and sparc64. It has the
advantage that we can remove quite a bit of assembler and it makes the
whole syscall.S process creation bits easier to read.
The follow-up patch will remove the custom sparc_do_fork() helper for
32bi sparc and move sparc_fork(), sparc_vfork(), and sparc_clone() into
a common process.c file. This allows us to remove quite a bit of
custom assembly form 32bit sparc's entry.S file too and allows to remove
even more code because now all helpers are shared between 32bit sparc
and sparc64 instead of having to maintain two separate sparc_do_fork()
implementations.
For some more context, please see:
commit 606e9ad200
Merge: ac61145a72457677c70c
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat Jan 11 15:33:48 2020 -0800
Merge tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"This contains a series of patches to fix CLONE_SETTLS when used with
clone3().
The clone3() syscall passes the tls argument through struct clone_args
instead of a register. This means, all architectures that do not
implement copy_thread_tls() but still support CLONE_SETTLS via
copy_thread() expecting the tls to be located in a register argument
based on clone() are currently unfortunately broken. Their tls value
will be garbage.
The patch series fixes this on all architectures that currently define
__ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure
that any architecture that enables clone3() in the future is forced to
also implement copy_thread_tls().
My ultimate goal is to get rid of the copy_thread()/copy_thread_tls()
split and just have copy_thread_tls() at some point in the not too
distant future (Maybe even renaming copy_thread_tls() back to simply
copy_thread() once the old function is ripped from all arches). This
is dependent now on all arches supporting clone3().
While all relevant arches do that now there are still four missing:
ia64, m68k, sh and sparc. They have the system call reserved, but not
implemented. Once they all implement clone3() we can get rid of
ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS.
Note that in the meantime, m68k has already switched to the new calling
convention.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guo Ren <guoren@kernel.org>
Cc: linux-csky@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: sparclinux@vger.kernel.org
See: d95b56c77e ("openrisc: Cleanup copy_thread_tls docs and comments")
See: 0b9f386c4b ("csky: Implement copy_thread_tls")
Link: https://lore.kernel.org/r/20200512171527.570109-2-christian.brauner@ubuntu.com
Merge still more updates from Andrew Morton:
"Various trees. Mainly those parts of MM whose linux-next dependents
are now merged. I'm still sitting on ~160 patches which await merges
from -next.
Subsystems affected by this patch series: mm/proc, ipc, dynamic-debug,
panic, lib, sysctl, mm/gup, mm/pagemap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (52 commits)
doc: cgroup: update note about conditions when oom killer is invoked
module: move the set_fs hack for flush_icache_range to m68k
nommu: use flush_icache_user_range in brk and mmap
binfmt_flat: use flush_icache_user_range
exec: use flush_icache_user_range in read_code
exec: only build read_code when needed
m68k: implement flush_icache_user_range
arm: rename flush_cache_user_range to flush_icache_user_range
xtensa: implement flush_icache_user_range
sh: implement flush_icache_user_range
asm-generic: add a flush_icache_user_range stub
mm: rename flush_icache_user_range to flush_icache_user_page
arm,sparc,unicore32: remove flush_icache_user_range
riscv: use asm-generic/cacheflush.h
powerpc: use asm-generic/cacheflush.h
openrisc: use asm-generic/cacheflush.h
m68knommu: use asm-generic/cacheflush.h
microblaze: use asm-generic/cacheflush.h
ia64: use asm-generic/cacheflush.h
hexagon: use asm-generic/cacheflush.h
...
Pull sparc updates from David Miller:
- Rework the sparc32 page tables so that READ_ONCE(*pmd), as done by
generic code, operates on a word sized element. From Will Deacon.
- Some scnprintf() conversions, from Chen Zhou.
- A pin_user_pages() conversion from John Hubbard.
- Several 32-bit ptrace register handling fixes and such from Al Viro.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()"
sparc32: mm: Only call ctor()/dtor() functions for first and last user
sparc32: mm: Disable SPLIT_PTLOCK_CPUS
sparc32: mm: Don't try to free page-table pages if ctor() fails
sparc32: register memory occupied by kernel as memblock.memory
sparc: remove unused header file nfs_fs.h
sparc32: fix register window handling in genregs32_[gs]et()
sparc64: fix misuses of access_process_vm() in genregs32_[sg]et()
oradax: convert get_user_pages() --> pin_user_pages()
sparc: use scnprintf() in show_pciobppath_attr() in vio.c
sparc: use scnprintf() in show_pciobppath_attr() in pci.c
tty: vcc: Fix error return code in vcc_probe()
sparc32: mm: Reduce allocation size for PMD and PTE tables
sparc32: mm: Change pgtable_t type to pte_t * instead of struct page *
sparc32: mm: Restructure sparc32 MMU page-table layout
sparc32: mm: Fix argument checking in __srmmu_get_nocache()
sparc64: Replace zero-length array with flexible-array
sparc: mm: return true,false in kern_addr_valid()
