c0c3fed3ae
539 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Nikolay Borisov
|
5297199a8b |
btrfs: remove inode number cache feature
It's been deprecated since commit
|
||
Filipe Manana
|
bc5b5b1e51 |
btrfs: stop incrementing log batch when joining log transaction
When joining a log transaction we acquire the root's log mutex, then increment the root's log batch and log writers counters while holding the mutex. However we don't need to increment the log batch there, because we are holding the mutex and incremented the log writers counter as well, so any other task trying to sync log will wait for the current task to finish its logging and still achieve the desired log batching. Since the log batch counter is an atomic counter and is incremented twice at the very beginning of the fsync callback (btrfs_sync_file()), once before flushing delalloc and once again after waiting for writeback to complete, eliminating its increment when joining the log transaction may provide some performance gains in case we have multiple concurrent tasks doing fsyncs against different files in the same subvolume, as it reduces contention on the atomic (locking the cacheline and bouncing it). When testing fio with 32 jobs, on a 8 cores VM, doing fsyncs against different files of the same subvolume, on top of a zram device, I could consistently see gains (higher throughput) between 1% to 2%, which is a very low value and possibly hard to be observed with a real device (I couldn't observe consistent gains with my low/mid end NVMe device). So this change is mostly motivated to just simplify the logic, as updating the log batch counter is only relevant when an fsync starts and while not holding the root's log mutex. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
f2f121ab50 |
btrfs: skip unnecessary searches for xattrs when logging an inode
Every time we log an inode we lookup in the fs/subvol tree for xattrs and if we have any, log them into the log tree. However it is very common to have inodes without any xattrs, so doing the search wastes times, but more importantly it adds contention on the fs/subvol tree locks, either making the logging code block and wait for tree locks or making the logging code making other concurrent operations block and wait. The most typical use cases where xattrs are used are when capabilities or ACLs are defined for an inode, or when SELinux is enabled. This change makes the logging code detect when an inode does not have xattrs and skip the xattrs search the next time the inode is logged, unless the inode is evicted and loaded again or a xattr is added to the inode. Therefore skipping the search for xattrs on inodes that don't ever have xattrs and are fsynced with some frequency. The following script that calls dbench was used to measure the impact of this change on a VM with 8 CPUs, 16Gb of ram, using a raw NVMe device directly (no intermediary filesystem on the host) and using a non-debug kernel (default configuration on Debian distributions): $ cat test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" mkfs.btrfs -f -m single -d single $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 200 40 umount $MNT The results before this change: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 5761605 0.172 312.057 Close 4232452 0.002 10.927 Rename 243937 1.406 277.344 Unlink 1163456 0.631 298.402 Deltree 160 11.581 221.107 Mkdir 80 0.003 0.005 Qpathinfo 5221410 0.065 122.309 Qfileinfo 915432 0.001 3.333 Qfsinfo 957555 0.003 3.992 Sfileinfo 469244 0.023 20.494 Find 2018865 0.448 123.659 WriteX 2874851 0.049 118.529 ReadX 9030579 0.004 21.654 LockX 18754 0.003 4.423 UnlockX 18754 0.002 0.331 Flush 403792 10.944 359.494 Throughput 908.444 MB/sec 40 clients 40 procs max_latency=359.500 ms The results after this change: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 6442521 0.159 230.693 Close 4732357 0.002 10.972 Rename 272809 1.293 227.398 Unlink 1301059 0.563 218.500 Deltree 160 7.796 54.887 Mkdir 80 0.008 0.478 Qpathinfo 5839452 0.047 124.330 Qfileinfo 1023199 0.001 4.996 Qfsinfo 1070760 0.003 5.709 Sfileinfo 524790 0.033 21.765 Find 2257658 0.314 125.611 WriteX 3211520 0.040 232.135 ReadX 10098969 0.004 25.340 LockX 20974 0.003 1.569 UnlockX 20974 0.002 3.475 Flush 451553 10.287 331.037 Throughput 1011.77 MB/sec 40 clients 40 procs max_latency=331.045 ms +10.8% throughput, -8.2% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
9a56fcd15a |
btrfs: make btrfs_update_inode take btrfs_inode
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
507433985c |
btrfs: make btrfs_truncate_inode_items take btrfs_inode
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
2766ff6176 |
btrfs: update the number of bytes used by an inode atomically
There are several occasions where we do not update the inode's number of used bytes atomically, resulting in a concurrent stat(2) syscall to report a value of used blocks that does not correspond to a valid value, that is, a value that does not match neither what we had before the operation nor what we get after the operation completes. In extreme cases it can result in stat(2) reporting zero used blocks, which can cause problems for some userspace tools where they can consider a file with a non-zero size and zero used blocks as completely sparse and skip reading data, as reported/discussed a long time ago in some threads like the following: https://lists.gnu.org/archive/html/bug-tar/2016-07/msg00001.html The cases where this can happen are the following: -> Case 1 If we do a write (buffered or direct IO) against a file region for which there is already an allocated extent (or multiple extents), then we have a short time window where we can report a number of used blocks to stat(2) that does not take into account the file region being overwritten. This short time window happens when completing the ordered extent(s). This happens because when we drop the extents in the write range we decrement the inode's number of bytes and later on when we insert the new extent(s) we increment the number of bytes in the inode, resulting in a short time window where a stat(2) syscall can get an incorrect number of used blocks. If we do writes that overwrite an entire file, then we have a short time window where we report 0 used blocks to stat(2). Example reproducer: $ cat reproducer-1.sh #!/bin/bash MNT=/mnt/sdi DEV=/dev/sdi stat_loop() { trap "wait; exit" SIGTERM local filepath=$1 local expected=$2 local got while :; do got=$(stat -c %b $filepath) if [ $got -ne $expected ]; then echo -n "ERROR: unexpected used blocks" echo " (got: $got expected: $expected)" fi done } mkfs.btrfs -f $DEV > /dev/null # mkfs.xfs -f $DEV > /dev/null # mkfs.ext4 -F $DEV > /dev/null # mkfs.f2fs -f $DEV > /dev/null # mkfs.reiserfs -f $DEV > /dev/null mount $DEV $MNT xfs_io -f -s -c "pwrite -b 64K 0 64K" $MNT/foobar >/dev/null expected=$(stat -c %b $MNT/foobar) # Create a process to keep calling stat(2) on the file and see if the # reported number of blocks used (disk space used) changes, it should # not because we are not increasing the file size nor punching holes. stat_loop $MNT/foobar $expected & loop_pid=$! for ((i = 0; i < 50000; i++)); do xfs_io -s -c "pwrite -b 64K 0 64K" $MNT/foobar >/dev/null done kill $loop_pid &> /dev/null wait umount $DEV $ ./reproducer-1.sh ERROR: unexpected used blocks (got: 0 expected: 128) ERROR: unexpected used blocks (got: 0 expected: 128) (...) Note that since this is a short time window where the race can happen, the reproducer may not be able to always trigger the bug in one run, or it may trigger it multiple times. -> Case 2 If we do a buffered write against a file region that does not have any allocated extents, like a hole or beyond EOF, then during ordered extent completion we have a short time window where a concurrent stat(2) syscall can report a number of used blocks that does not correspond to the value before or after the write operation, a value that is actually larger than the value after the write completes. This happens because once we start a buffered write into an unallocated file range we increment the inode's 'new_delalloc_bytes', to make sure any stat(2) call gets a correct used blocks value before delalloc is flushed and completes. However at ordered extent completion, after we inserted the new extent, we increment the inode's number of bytes used with the size of the new extent, and only later, when clearing the range in the inode's iotree, we decrement the inode's 'new_delalloc_bytes' counter with the size of the extent. So this results in a short time window where a concurrent stat(2) syscall can report a number of used blocks that accounts for the new extent twice. Example reproducer: $ cat reproducer-2.sh #!/bin/bash MNT=/mnt/sdi DEV=/dev/sdi stat_loop() { trap "wait; exit" SIGTERM local filepath=$1 local expected=$2 local got while :; do got=$(stat -c %b $filepath) if [ $got -ne $expected ]; then echo -n "ERROR: unexpected used blocks" echo " (got: $got expected: $expected)" fi done } mkfs.btrfs -f $DEV > /dev/null # mkfs.xfs -f $DEV > /dev/null # mkfs.ext4 -F $DEV > /dev/null # mkfs.f2fs -f $DEV > /dev/null # mkfs.reiserfs -f $DEV > /dev/null mount $DEV $MNT touch $MNT/foobar write_size=$((64 * 1024)) for ((i = 0; i < 16384; i++)); do offset=$(($i * $write_size)) xfs_io -c "pwrite -S 0xab $offset $write_size" $MNT/foobar >/dev/null blocks_used=$(stat -c %b $MNT/foobar) # Fsync the file to trigger writeback and keep calling stat(2) on it # to see if the number of blocks used changes. stat_loop $MNT/foobar $blocks_used & loop_pid=$! xfs_io -c "fsync" $MNT/foobar kill $loop_pid &> /dev/null wait $loop_pid done umount $DEV $ ./reproducer-2.sh ERROR: unexpected used blocks (got: 265472 expected: 265344) ERROR: unexpected used blocks (got: 284032 expected: 283904) (...) Note that since this is a short time window where the race can happen, the reproducer may not be able to always trigger the bug in one run, or it may trigger it multiple times. -> Case 3 Another case where such problems happen is during other operations that replace extents in a file range with other extents. Those operations are extent cloning, deduplication and fallocate's zero range operation. The cause of the problem is similar to the first case. When we drop the extents from a range, we decrement the inode's number of bytes, and later on, after inserting the new extents we increment it. Since this is not done atomically, a concurrent stat(2) call can see and return a number of used blocks that is smaller than it should be, does not match the number of used blocks before or after the clone/deduplication/zero operation. Like for the first case, when doing a clone, deduplication or zero range operation against an entire file, we end up having a time window where we can report 0 used blocks to a stat(2) call. Example reproducer: $ cat reproducer-3.sh #!/bin/bash MNT=/mnt/sdi DEV=/dev/sdi mkfs.btrfs -f $DEV > /dev/null # mkfs.xfs -f -m reflink=1 $DEV > /dev/null mount $DEV $MNT extent_size=$((64 * 1024)) num_extents=16384 file_size=$(($extent_size * $num_extents)) # File foo has many small extents. xfs_io -f -s -c "pwrite -S 0xab -b $extent_size 0 $file_size" $MNT/foo \ > /dev/null # File bar has much less extents and has exactly the same data as foo. xfs_io -f -c "pwrite -S 0xab 0 $file_size" $MNT/bar > /dev/null expected=$(stat -c %b $MNT/foo) # Now deduplicate bar into foo. While the deduplication is in progres, # the number of used blocks/file size reported by stat should not change xfs_io -c "dedupe $MNT/bar 0 0 $file_size" $MNT/foo > /dev/null & dedupe_pid=$! while [ -n "$(ps -p $dedupe_pid -o pid=)" ]; do used=$(stat -c %b $MNT/foo) if [ $used -ne $expected ]; then echo "Unexpected blocks used: $used (expected: $expected)" fi done umount $DEV $ ./reproducer-3.sh Unexpected blocks used: 2076800 (expected: 2097152) Unexpected blocks used: 2097024 (expected: 2097152) Unexpected blocks used: 2079872 (expected: 2097152) (...) Note that since this is a short time window where the race can happen, the reproducer may not be able to always trigger the bug in one run, or it may trigger it multiple times. So fix this by: 1) Making btrfs_drop_extents() not decrement the VFS inode's number of bytes, and instead return the number of bytes; 2) Making any code that drops extents and adds new extents update the inode's number of bytes atomically, while holding the btrfs inode's spinlock, which is also used by the stat(2) callback to get the inode's number of bytes; 3) For ranges in the inode's iotree that are marked as 'delalloc new', corresponding to previously unallocated ranges, increment the inode's number of bytes when clearing the 'delalloc new' bit from the range, in the same critical section that decrements the inode's 'new_delalloc_bytes' counter, delimited by the btrfs inode's spinlock. An alternative would be to have btrfs_getattr() wait for any IO (ordered extents in progress) and locking the whole range (0 to (u64)-1) while it it computes the number of blocks used. But that would mean blocking stat(2), which is a very used syscall and expected to be fast, waiting for writes, clone/dedupe, fallocate, page reads, fiemap, etc. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
5893dfb98f |
btrfs: refactor btrfs_drop_extents() to make it easier to extend
There are many arguments for __btrfs_drop_extents() and its wrapper
btrfs_drop_extents(), which makes it hard to add more arguments to it and
requires changing every caller. I have added a couple myself back in 2014
commit
|
||
Josef Bacik
|
3fbaf25817 |
btrfs: pass the owner_root and level to alloc_extent_buffer
Now that we've plumbed all of the callers to have the owner root and the level, plumb it down into alloc_extent_buffer(). Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
ac5887c8e0 |
btrfs: locking: remove all the blocking helpers
Now that we're using a rw_semaphore we no longer need to indicate if a lock is blocking or not, nor do we need to flip the entire path from blocking to spinning. Remove these helpers and all the places they are called. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
ecdcf3c259 |
btrfs: open code insert_orphan_item
Just open code it in its sole caller and remove a level of indirection. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
bb56f02f26 |
btrfs: reschedule if necessary when logging directory items
Logging directories with many entries can take a significant amount of time, and in some cases monopolize a cpu/core for a long time if the logging task doesn't happen to block often enough. Johannes and Lu Fengqi reported test case generic/041 triggering a soft lockup when the kernel has CONFIG_SOFTLOCKUP_DETECTOR=y. For this test case we log an inode with 3002 hard links, and because the test removed one hard link before fsyncing the file, the inode logging causes the parent directory do be logged as well, which has 6004 directory items to log (3002 BTRFS_DIR_ITEM_KEY items plus 3002 BTRFS_DIR_INDEX_KEY items), so it can take a significant amount of time and trigger the soft lockup. So just make tree-log.c:log_dir_items() reschedule when necessary, releasing the current search path before doing so and then resume from where it was before the reschedule. The stack trace produced when the soft lockup happens is the following: [10480.277653] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [xfs_io:28172] [10480.279418] Modules linked in: dm_thin_pool dm_persistent_data (...) [10480.284915] irq event stamp: 29646366 [10480.285987] hardirqs last enabled at (29646365): [<ffffffff85249b66>] __slab_alloc.constprop.0+0x56/0x60 [10480.288482] hardirqs last disabled at (29646366): [<ffffffff8579b00d>] irqentry_enter+0x1d/0x50 [10480.290856] softirqs last enabled at (4612): [<ffffffff85a00323>] __do_softirq+0x323/0x56c [10480.293615] softirqs last disabled at (4483): [<ffffffff85800dbf>] asm_call_on_stack+0xf/0x20 [10480.296428] CPU: 2 PID: 28172 Comm: xfs_io Not tainted 5.9.0-rc4-default+ #1248 [10480.298948] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 [10480.302455] RIP: 0010:__slab_alloc.constprop.0+0x19/0x60 [10480.304151] Code: 86 e8 31 75 21 00 66 66 2e 0f 1f 84 00 00 00 (...) [10480.309558] RSP: 0018:ffffadbe09397a58 EFLAGS: 00000282 [10480.311179] RAX: ffff8a495ab92840 RBX: 0000000000000282 RCX: 0000000000000006 [10480.313242] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff85249b66 [10480.315260] RBP: ffff8a497d04b740 R08: 0000000000000001 R09: 0000000000000001 [10480.317229] R10: ffff8a497d044800 R11: ffff8a495ab93c40 R12: 0000000000000000 [10480.319169] R13: 0000000000000000 R14: 0000000000000c40 R15: ffffffffc01daf70 [10480.321104] FS: 00007fa1dc5c0e40(0000) GS:ffff8a497da00000(0000) knlGS:0000000000000000 [10480.323559] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10480.325235] CR2: 00007fa1dc5befb8 CR3: 0000000004f8a006 CR4: 0000000000170ea0 [10480.327259] Call Trace: [10480.328286] ? overwrite_item+0x1f0/0x5a0 [btrfs] [10480.329784] __kmalloc+0x831/0xa20 [10480.331009] ? btrfs_get_32+0xb0/0x1d0 [btrfs] [10480.332464] overwrite_item+0x1f0/0x5a0 [btrfs] [10480.333948] log_dir_items+0x2ee/0x570 [btrfs] [10480.335413] log_directory_changes+0x82/0xd0 [btrfs] [10480.336926] btrfs_log_inode+0xc9b/0xda0 [btrfs] [10480.338374] ? init_once+0x20/0x20 [btrfs] [10480.339711] btrfs_log_inode_parent+0x8d3/0xd10 [btrfs] [10480.341257] ? dget_parent+0x97/0x2e0 [10480.342480] btrfs_log_dentry_safe+0x3a/0x50 [btrfs] [10480.343977] btrfs_sync_file+0x24b/0x5e0 [btrfs] [10480.345381] do_fsync+0x38/0x70 [10480.346483] __x64_sys_fsync+0x10/0x20 [10480.347703] do_syscall_64+0x2d/0x70 [10480.348891] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [10480.350444] RIP: 0033:0x7fa1dc80970b [10480.351642] Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 (...) [10480.356952] RSP: 002b:00007fffb3d081d0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [10480.359458] RAX: ffffffffffffffda RBX: 0000562d93d45e40 RCX: 00007fa1dc80970b [10480.361426] RDX: 0000562d93d44ab0 RSI: 0000562d93d45e60 RDI: 0000000000000003 [10480.363367] RBP: 0000000000000001 R08: 0000000000000000 R09: 00007fa1dc7b2a40 [10480.365317] R10: 0000562d93d0e366 R11: 0000000000000293 R12: 0000000000000001 [10480.367299] R13: 0000562d93d45290 R14: 0000562d93d45e40 R15: 0000562d93d45e60 Link: https://lore.kernel.org/linux-btrfs/20180713090216.GC575@fnst.localdomain/ Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> CC: stable@vger.kernel.org # 4.4+ Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
487781796d |
btrfs: make fast fsyncs wait only for writeback
Currently regardless of a full or a fast fsync we always wait for ordered
extents to complete, and then start logging the inode after that. However
for fast fsyncs we can just wait for the writeback to complete, we don't
need to wait for the ordered extents to complete since we use the list of
modified extents maps to figure out which extents we must log and we can
get their checksums directly from the ordered extents that are still in
flight, otherwise look them up from the checksums tree.
Until commit
|
||
|
Filipe Manana
|
75b463d2b4 |
btrfs: do not commit logs and transactions during link and rename operations
Since commit
|
||
|
Filipe Manana
|
5522a27e59 |
btrfs: do not take the log_mutex of the subvolume when pinning the log
During a rename we pin the log to make sure no one commits a log that
reflects an ongoing rename operation, as it might result in a committed
log where it recorded the unlink of the old name without having recorded
the new name. However we are taking the subvolume's log_mutex before
incrementing the log_writers counter, which is not necessary since that
counter is atomic and we only remove the old name from the log and add
the new name to the log after we have incremented log_writers, ensuring
that no one can commit the log after we have removed the old name from
the log and before we added the new name to the log.
By taking the log_mutex lock we are just adding unnecessary contention on
the lock, which can become visible for workloads that mix renames with
fsyncs, writes for files opened with O_SYNC and unlink operations (if the
inode or its parent were fsynced before in the current transaction).
So just remove the lock and unlock of the subvolume's log_mutex at
btrfs_pin_log_trans().
Using dbench, which mixes different types of operations that end up taking
that mutex (fsyncs, renames, unlinks and writes into files opened with
O_SYNC) revealed some small gains. The following script that calls dbench
was used:
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/btrfs
MOUNT_OPTIONS="-o ssd -o space_cache=v2"
MKFS_OPTIONS="-m single -d single"
THREADS=32
echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -s -t 600 -D $MNT $THREADS
umount $MNT
The test was run on bare metal, no virtualization, on a box with 12 cores
(Intel i7-8700), 64Gb of RAM and using a NVMe device, with a kernel
configuration that is the default of typical distributions (debian in this
case), without debug options enabled (kasan, kmemleak, slub debug, debug
of page allocations, lock debugging, etc).
Results before this patch:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4410848 0.017 738.640
Close 3240222 0.001 0.834
Rename 186850 7.478 1272.476
Unlink 890875 0.128 785.018
Deltree 128 2.846 12.081
Mkdir 64 0.002 0.003
Qpathinfo 3997659 0.009 11.171
Qfileinfo 701307 0.001 0.478
Qfsinfo 733494 0.002 1.103
Sfileinfo 359362 0.004 3.266
Find
|
||
Randy Dunlap
|
260db43cd2 |
btrfs: delete duplicated words + other fixes in comments
Delete repeated words in fs/btrfs/.
{to, the, a, and old}
and change "into 2 part" to "into 2 parts".
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Josef Bacik
|
fb2fecbad5 |
btrfs: check the right error variable in btrfs_del_dir_entries_in_log
With my new locking code dbench is so much faster that I tripped over a
transaction abort from ENOSPC. This turned out to be because
btrfs_del_dir_entries_in_log was checking for ret == -ENOSPC, but this
function sets err on error, and returns err. So instead of properly
marking the inode as needing a full commit, we were returning -ENOSPC
and aborting in __btrfs_unlink_inode. Fix this by checking the proper
variable so that we return the correct thing in the case of ENOSPC.
The ENOENT needs to be checked, because btrfs_lookup_dir_item_index()
can return -ENOENT if the dir item isn't in the tree log (which would
happen if we hadn't fsync'ed this guy). We actually handle that case in
__btrfs_unlink_inode, so it's an expected error to get back.
Fixes:
|
||
|
Filipe Manana
|
4f26433e9b |
btrfs: fix memory leaks after failure to lookup checksums during inode logging
While logging an inode, at copy_items(), if we fail to lookup the checksums
for an extent we release the destination path, free the ins_data array and
then return immediately. However a previous iteration of the for loop may
have added checksums to the ordered_sums list, in which case we leak the
memory used by them.
So fix this by making sure we iterate the ordered_sums list and free all
its checksums before returning.
Fixes:
|
||
|
Filipe Manana
|
3ebac17ce5 |
btrfs: reduce contention on log trees when logging checksums
The possibility of extents being shared (through clone and deduplication operations) requires special care when logging data checksums, to avoid having a log tree with different checksum items that cover ranges which overlap (which resulted in missing checksums after replaying a log tree). Such problems were fixed in the past by the following commits: commit |
||
|
Filipe Manana
|
a93e01682e |
btrfs: remove no longer needed use of log_writers for the log root tree
When syncing the log, we used to update the log root tree without holding
neither the log_mutex of the subvolume root nor the log_mutex of log root
tree.
We used to have two critical sections delimited by the log_mutex of the
log root tree, so in the first one we incremented the log_writers of the
log root tree and on the second one we decremented it and waited for the
log_writers counter to go down to zero. This was because the update of
the log root tree happened between the two critical sections.
The use of two critical sections allowed a little bit more of parallelism
and required the use of the log_writers counter, necessary to make sure
we didn't miss any log root tree update when we have multiple tasks trying
to sync the log in parallel.
However after commit
|
||
|
Filipe Manana
|
28a9579561 |
btrfs: stop incremening log_batch for the log root tree when syncing log
We are incrementing the log_batch atomic counter of the root log tree but
we never use that counter, it's used only for the log trees of subvolume
roots. We started doing it when we moved the log_batch and log_write
counters from the global, per fs, btrfs_fs_info structure, into the
btrfs_root structure in commit
|
||
|
Filipe Manana
|
5aa7d1a7f4 |
btrfs: only commit delayed items at fsync if we are logging a directory
When logging an inode we are committing its delayed items if either the
inode is a directory or if it is a new inode, created in the current
transaction.
We need to do it for directories, since new directory indexes are stored
as delayed items of the inode and when logging a directory we need to be
able to access all indexes from the fs/subvolume tree in order to figure
out which index ranges need to be logged.
However for new inodes that are not directories, we do not need to do it
because the only type of delayed item they can have is the inode item, and
we are guaranteed to always log an up to date version of the inode item:
*) for a full fsync we do it by committing the delayed inode and then
copying the item from the fs/subvolume tree with
copy_inode_items_to_log();
*) for a fast fsync we always log the inode item based on the contents of
the in-memory struct btrfs_inode. We guarantee this is always done since
commit
|
||
|
Filipe Manana
|
8c8648dd1f |
btrfs: only commit the delayed inode when doing a full fsync
Commit |
||
|
Nikolay Borisov
|
906c448c3d |
btrfs: make __btrfs_drop_extents take btrfs_inode
It has only 4 uses of a vfs_inode for inode_sub_bytes but unifies the interface with the non __ prefixed version. Will also makes converting its callers to btrfs_inode easier. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
e7a79811d0 |
btrfs: check if a log root exists before locking the log_mutex on unlink
This brings back an optimization that commit |
||
|
Filipe Manana
|
e289f03ea7 |
btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents
When we have extents shared amongst different inodes in the same subvolume, if we fsync them in parallel we can end up with checksum items in the log tree that represent ranges which overlap. For example, consider we have inodes A and B, both sharing an extent that covers the logical range from X to X + 64KiB: 1) Task A starts an fsync on inode A; 2) Task B starts an fsync on inode B; 3) Task A calls btrfs_csum_file_blocks(), and the first search in the log tree, through btrfs_lookup_csum(), returns -EFBIG because it finds an existing checksum item that covers the range from X - 64KiB to X; 4) Task A checks that the checksum item has not reached the maximum possible size (MAX_CSUM_ITEMS) and then releases the search path before it does another path search for insertion (through a direct call to btrfs_search_slot()); 5) As soon as task A releases the path and before it does the search for insertion, task B calls btrfs_csum_file_blocks() and gets -EFBIG too, because there is an existing checksum item that has an end offset that matches the start offset (X) of the checksum range we want to log; 6) Task B releases the path; 7) Task A does the path search for insertion (through btrfs_search_slot()) and then verifies that the checksum item that ends at offset X still exists and extends its size to insert the checksums for the range from X to X + 64KiB; 8) Task A releases the path and returns from btrfs_csum_file_blocks(), having inserted the checksums into an existing checksum item that got its size extended. At this point we have one checksum item in the log tree that covers the logical range from X - 64KiB to X + 64KiB; 9) Task B now does a search for insertion using btrfs_search_slot() too, but it finds that the previous checksum item no longer ends at the offset X, it now ends at an of offset X + 64KiB, so it leaves that item untouched. Then it releases the path and calls btrfs_insert_empty_item() that inserts a checksum item with a key offset corresponding to X and a size for inserting a single checksum (4 bytes in case of crc32c). Subsequent iterations end up extending this new checksum item so that it contains the checksums for the range from X to X + 64KiB. So after task B returns from btrfs_csum_file_blocks() we end up with two checksum items in the log tree that have overlapping ranges, one for the range from X - 64KiB to X + 64KiB, and another for the range from X to X + 64KiB. Having checksum items that represent ranges which overlap, regardless of being in the log tree or in the chekcsums tree, can lead to problems where checksums for a file range end up not being found. This type of problem has happened a few times in the past and the following commits fixed them and explain in detail why having checksum items with overlapping ranges is problematic: |
||
David Sterba
|
0202e83fda |
btrfs: simplify iget helpers
The inode lookup starting at btrfs_iget takes the full location key, while only the objectid is used to match the inode, because the lookup happens inside the given root thus the inode number is unique. The entire location key is properly set up in btrfs_init_locked_inode. Simplify the helpers and pass only inode number, renaming it to 'ino' instead of 'objectid'. This allows to remove temporary variables key, saving some stack space. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
56e9357a1e |
btrfs: simplify root lookup by id
The main function to lookup a root by its id btrfs_get_fs_root takes the whole key, while only using the objectid. The value of offset is preset to (u64)-1 but not actually used until btrfs_find_root that does the actual search. Switch btrfs_get_fs_root to use only objectid and remove all local variables that existed just for the lookup. The actual key for search is set up in btrfs_get_fs_root, reusing another key variable. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
60d48e2e45 |
btrfs: don't use set/get token for single assignment in overwrite_item
The set/get token is supposed to cache the last page that was accessed so it speeds up subsequential access to the eb. It does not make sense to use that for just one change, which is the case of inode size in overwrite_item. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
cc4c13d55c |
btrfs: drop eb parameter from set/get token helpers
Now that all set/get helpers use the eb from the token, we don't need to pass it to many btrfs_token_*/btrfs_set_token_* helpers, saving some stack space. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
0bc2d3c08e |
btrfs: remove useless check for copy_items() return value
At btrfs_log_prealloc_extents() we are checking if copy_items() returns a
value greater than 0. That used to happen in the past to signal the caller
that the path given to it was released and reused for other searches, but
as of commit
|
||
Qu Wenruo
|
e3b8336117 |
btrfs: remove the redundant parameter level in btrfs_bin_search()
All callers pass the eb::level so we can get read it directly inside the btrfs_bin_search and key_search. This is inspired by the work of Marek in U-boot. CC: Marek Behun <marek.behun@nic.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
f135cea30d |
btrfs: fix partial loss of prealloc extent past i_size after fsync
When we have an inode with a prealloc extent that starts at an offset
lower than the i_size and there is another prealloc extent that starts at
an offset beyond i_size, we can end up losing part of the first prealloc
extent (the part that starts at i_size) and have an implicit hole if we
fsync the file and then have a power failure.
Consider the following example with comments explaining how and why it
happens.
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
# Create our test file with 2 consecutive prealloc extents, each with a
# size of 128Kb, and covering the range from 0 to 256Kb, with a file
# size of 0.
$ xfs_io -f -c "falloc -k 0 128K" /mnt/foo
$ xfs_io -c "falloc -k 128K 128K" /mnt/foo
# Fsync the file to record both extents in the log tree.
$ xfs_io -c "fsync" /mnt/foo
# Now do a redudant extent allocation for the range from 0 to 64Kb.
# This will merely increase the file size from 0 to 64Kb. Instead we
# could also do a truncate to set the file size to 64Kb.
$ xfs_io -c "falloc 0 64K" /mnt/foo
# Fsync the file, so we update the inode item in the log tree with the
# new file size (64Kb). This also ends up setting the number of bytes
# for the first prealloc extent to 64Kb. This is done by the truncation
# at btrfs_log_prealloc_extents().
# This means that if a power failure happens after this, a write into
# the file range 64Kb to 128Kb will not use the prealloc extent and
# will result in allocation of a new extent.
$ xfs_io -c "fsync" /mnt/foo
# Now set the file size to 256K with a truncate and then fsync the file.
# Since no changes happened to the extents, the fsync only updates the
# i_size in the inode item at the log tree. This results in an implicit
# hole for the file range from 64Kb to 128Kb, something which fsck will
# complain when not using the NO_HOLES feature if we replay the log
# after a power failure.
$ xfs_io -c "truncate 256K" -c "fsync" /mnt/foo
So instead of always truncating the log to the inode's current i_size at
btrfs_log_prealloc_extents(), check first if there's a prealloc extent
that starts at an offset lower than the i_size and with a length that
crosses the i_size - if there is one, just make sure we truncate to a
size that corresponds to the end offset of that prealloc extent, so
that we don't lose the part of that extent that starts at i_size if a
power failure happens.
A test case for fstests follows soon.
Fixes:
|
||
|
Filipe Manana
|
7af597433d |
btrfs: make full fsyncs always operate on the entire file again
This is a revert of commit |
||
|
Josef Bacik
|
8c38938c7b |
btrfs: move the root freeing stuff into btrfs_put_root
There are a few different ways to free roots, either you allocated them yourself and you just do free_extent_buffer(root->node); free_extent_buffer(root->commit_node); btrfs_put_root(root); Which is the pattern for log roots. Or for snapshots/subvolumes that are being dropped you simply call btrfs_free_fs_root() which does all the cleanup for you. Unify this all into btrfs_put_root(), so that we don't free up things associated with the root until the last reference is dropped. This makes the root freeing code much more significant. The only caveat is at close_ctree() time we have to free the extent buffers for all of our main roots (extent_root, chunk_root, etc) because we have to drop the btree_inode and we'll run into issues if we hold onto those nodes until ->kill_sb() time. This will be addressed in the future when we kill the btree_inode. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
0a8068a3dd |
btrfs: make ranged full fsyncs more efficient
Commit |
||
|
Filipe Manana
|
da447009a2 |
btrfs: factor out inode items copy loop from btrfs_log_inode()
The function btrfs_log_inode() is quite large and so is its loop which iterates the inode items from the fs/subvolume tree and copies them into a log tree. Because this is a large loop inside a very large function and because an upcoming patch in this series needs to add some more logic inside that loop, move the loop into a helper function to make it a bit more manageable. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
a5eeb3d17b |
btrfs: add helper to get the end offset of a file extent item
Getting the end offset for a file extent item requires a bit of code since the extent can be either inline or regular/prealloc. There are some places all over the code base that open code this logic and in another patch later in this series it will be needed again. Therefore encapsulate this logic in a helper function and use it. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
9fce570454 |
btrfs: Make btrfs_pin_extent_for_log_replay take transaction handle
Preparation for refactoring pinned extents tracking. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
7bfc100705 |
btrfs: Make btrfs_pin_reserved_extent take transaction handle
btrfs_pin_reserved_extent is now only called with a valid transaction so exploit the fact to take a transaction. This is preparation for tracking pinned extents on a per-transaction basis. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
10e958d523 |
btrfs: Call btrfs_pin_reserved_extent only during active transaction
Calling btrfs_pin_reserved_extent makes sense only with a valid transaction since pinned extents are processed from transaction commit in btrfs_finish_extent_commit. In case of error it's sufficient to adjust the reserved counter to account for log tree extents allocated in the last transaction. This commit moves btrfs_pin_reserved_extent to be called only with valid transaction handle and otherwise uses the newly introduced unaccount_log_buffer to adjust "reserved". If this is not done if a failure occurs before transaction is committed WARN_ON are going to be triggered on unmount. This was especially pronounced with generic/475 test. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
6787bb9f35 |
btrfs: Introduce unaccount_log_buffer
This function correctly adjusts the reserved bytes occupied by a log tree extent buffer. It will be used instead of calling btrfs_pin_reserved_extent. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
0024652895 |
btrfs: rename btrfs_put_fs_root and btrfs_grab_fs_root
We are now using these for all roots, rename them to btrfs_put_root() and btrfs_grab_root(); Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
bc44d7c4b2 |
btrfs: push btrfs_grab_fs_root into btrfs_get_fs_root
Now that all callers of btrfs_get_fs_root are subsequently calling btrfs_grab_fs_root and handling dropping the ref when they are done appropriately, go ahead and push btrfs_grab_fs_root up into btrfs_get_fs_root. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
81f096edf0 |
btrfs: use btrfs_put_fs_root to free roots always
If we are going to track leaked roots we need to free them all the same way, so don't kfree() roots directly, use btrfs_put_fs_root. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
ca2037fba6 |
btrfs: hold a ref on the root in btrfs_recover_log_trees
We replay the log into arbitrary fs roots, hold a ref on the root while we're doing this. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
3619c94f07 |
btrfs: open code btrfs_read_fs_root_no_name
All this does is call btrfs_get_fs_root() with check_ref == true. Just use btrfs_get_fs_root() so we don't have a bunch of different helpers that do the same thing. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
62a2c73ebd |
btrfs: export and use btrfs_read_tree_root for tree-log
Tree-log uses btrfs_read_fs_root to load its log, but this just calls btrfs_read_tree_root. We don't save the log roots in our root cache, so just export this helper and use it in the logging code. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
9ddc959e80 |
btrfs: use the file extent tree infrastructure
We want to use this everywhere we modify the file extent items permanently. These include: 1) Inserting new file extents for writes and prealloc extents. 2) Truncating inode items. 3) btrfs_cont_expand(). 4) Insert inline extents. 5) Insert new extents from log replay. 6) Insert a new extent for clone, as it could be past i_size. 7) Hole punching For hole punching in particular it might seem it's not necessary because anybody extending would use btrfs_cont_expand, however there is a corner that still can give us trouble. Start with an empty file and fallocate KEEP_SIZE 1M-2M We now have a 0 length file, and a hole file extent from 0-1M, and a prealloc extent from 1M-2M. Now punch 1M-1.5M Because this is past i_size we have [HOLE EXTENT][ NOTHING ][PREALLOC] [0 1M][1M 1.5M][1.5M 2M] with an i_size of 0. Now if we pwrite 0-1.5M we'll increas our i_size to 1.5M, but our disk_i_size is still 0 until the ordered extent completes. However if we now immediately truncate 2M on the file we'll just call btrfs_cont_expand(inode, 1.5M, 2M), since our old i_size is 1.5M. If we commit the transaction here and crash we'll expose the gap. To fix this we need to clear the file extent mapping for the range that we punched but didn't insert a corresponding file extent for. This will mean the truncate will only get an disk_i_size set to 1M if we crash before the finish ordered io happens. I've written an xfstest to reproduce the problem and validate this fix. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
b5e4ff9d46 |
Btrfs: fix infinite loop during fsync after rename operations
Recently fsstress (from fstests) sporadically started to trigger an
infinite loop during fsync operations. This turned out to be because
support for the rename exchange and whiteout operations was added to
fsstress in fstests. These operations, unlike any others in fsstress,
cause file names to be reused, whence triggering this issue. However
it's not necessary to use rename exchange and rename whiteout operations
trigger this issue, simple rename operations and file creations are
enough to trigger the issue.
The issue boils down to when we are logging inodes that conflict (that
had the name of any inode we need to log during the fsync operation), we
keep logging them even if they were already logged before, and after
that we check if there's any other inode that conflicts with them and
then add it again to the list of inodes to log. Skipping already logged
inodes fixes the issue.
Consider the following example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir # inode 257
$ touch /mnt/testdir/zz # inode 258
$ ln /mnt/testdir/zz /mnt/testdir/zz_link
$ touch /mnt/testdir/a # inode 259
$ sync
# The following 3 renames achieve the same result as a rename exchange
# operation (<rename_exchange> /mnt/testdir/zz_link to /mnt/testdir/a).
$ mv /mnt/testdir/a /mnt/testdir/a/tmp
$ mv /mnt/testdir/zz_link /mnt/testdir/a
$ mv /mnt/testdir/a/tmp /mnt/testdir/zz_link
# The following rename and file creation give the same result as a
# rename whiteout operation (<rename_whiteout> zz to a2).
$ mv /mnt/testdir/zz /mnt/testdir/a2
$ touch /mnt/testdir/zz # inode 260
$ xfs_io -c fsync /mnt/testdir/zz
--> results in the infinite loop
The following steps happen:
1) When logging inode 260, we find that its reference named "zz" was
used by inode 258 in the previous transaction (through the commit
root), so inode 258 is added to the list of conflicting indoes that
need to be logged;
2) After logging inode 258, we find that its reference named "a" was
used by inode 259 in the previous transaction, and therefore we add
inode 259 to the list of conflicting inodes to be logged;
3) After logging inode 259, we find that its reference named "zz_link"
was used by inode 258 in the previous transaction - we add inode 258
to the list of conflicting inodes to log, again - we had already
logged it before at step 3. After logging it again, we find again
that inode 259 conflicts with him, and we add again 259 to the list,
etc - we end up repeating all the previous steps.
So fix this by skipping logging of conflicting inodes that were already
logged.
Fixes:
|
||
|
Nikolay Borisov
|
36ee0b44ad |
btrfs: Remove redundant WARN_ON in walk_down_log_tree
level <0 and level >= BTRFS_MAX_LEVEL are already performed upon
extent buffer read by tree checker in btrfs_check_node.
go. As far as 'level <= 0' we are guaranteed that level is '> 0'
because the value of level _before_ reading 'next' is larger than 1
(otherwise we wouldn't have executed that code at all) this in turn
guarantees that 'level' after btrfs_read_buffer is 'level - 1' since
we verify this invariant in:
btrfs_read_buffer
btree_read_extent_buffer_pages
btrfs_verify_level_key
This guarantees that level can never be '<= 0' so the warn on is
never triggered.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Nikolay Borisov
|
5c4b691eb8 |
btrfs: Remove WARN_ON in walk_log_tree
The log_root passed to walk_log_tree is guaranteed to have its root_key.objectid always be BTRFS_TREE_LOG_OBJECTID. This is by merit that all log roots of an ordinary root are allocated in alloc_log_tree which hard-codes objectid to be BTRFS_TREE_LOG_OBJECTID. In case walk_log_tree is called for a log tree found by btrfs_read_fs_root in btrfs_recover_log_trees, that function already ensures found_key.objectid is BTRFS_TREE_LOG_OBJECTID. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
a0fbf736d3 |
btrfs: Rename __btrfs_free_reserved_extent to btrfs_pin_reserved_extent
__btrfs_free_reserved_extent now performs the actions of btrfs_free_and_pin_reserved_extent. But this name is a bit of a misnomer, since the extent is not really freed but just pinned. Reflect this in the new name. No semantics changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
0e56315ca1 |
Btrfs: fix missing hole after hole punching and fsync when using NO_HOLES
When using the NO_HOLES feature, if we punch a hole into a file and then
fsync it, there are cases where a subsequent fsync will miss the fact that
a hole was punched, resulting in the holes not existing after replaying
the log tree.
Essentially these cases all imply that, tree-log.c:copy_items(), is not
invoked for the leafs that delimit holes, because nothing changed those
leafs in the current transaction. And it's precisely copy_items() where
we currenly detect and log holes, which works as long as the holes are
between file extent items in the input leaf or between the beginning of
input leaf and the previous leaf or between the last item in the leaf
and the next leaf.
First example where we miss a hole:
*) The extent items of the inode span multiple leafs;
*) The punched hole covers a range that affects only the extent items of
the first leaf;
*) The fsync operation is done in full mode (BTRFS_INODE_NEEDS_FULL_SYNC
is set in the inode's runtime flags).
That results in the hole not existing after replaying the log tree.
For example, if the fs/subvolume tree has the following layout for a
particular inode:
Leaf N, generation 10:
[ ... INODE_ITEM INODE_REF EXTENT_ITEM (0 64K) EXTENT_ITEM (64K 128K) ]
Leaf N + 1, generation 10:
[ EXTENT_ITEM (128K 64K) ... ]
If at transaction 11 we punch a hole coverting the range [0, 128K[, we end
up dropping the two extent items from leaf N, but we don't touch the other
leaf, so we end up in the following state:
Leaf N, generation 11:
[ ... INODE_ITEM INODE_REF ]
Leaf N + 1, generation 10:
[ EXTENT_ITEM (128K 64K) ... ]
A full fsync after punching the hole will only process leaf N because it
was modified in the current transaction, but not leaf N + 1, since it
was not modified in the current transaction (generation 10 and not 11).
As a result the fsync will not log any holes, because it didn't process
any leaf with extent items.
Second example where we will miss a hole:
*) An inode as its items spanning 5 (or more) leafs;
*) A hole is punched and it covers only the extents items of the 3rd
leaf. This resulsts in deleting the entire leaf and not touching any
of the other leafs.
So the only leaf that is modified in the current transaction, when
punching the hole, is the first leaf, which contains the inode item.
During the full fsync, the only leaf that is passed to copy_items()
is that first leaf, and that's not enough for the hole detection
code in copy_items() to determine there's a hole between the last
file extent item in the 2nd leaf and the first file extent item in
the 3rd leaf (which was the 4th leaf before punching the hole).
Fix this by scanning all leafs and punch holes as necessary when doing a
full fsync (less common than a non-full fsync) when the NO_HOLES feature
is enabled. The lack of explicit file extent items to mark holes makes it
necessary to scan existing extents to determine if holes exist.
A test case for fstests follows soon.
Fixes:
|
||
|
Josef Bacik
|
9bc574de59 |
btrfs: skip log replay on orphaned roots
My fsstress modifications coupled with generic/475 uncovered a failure to mount and replay the log if we hit a orphaned root. We do not want to replay the log for an orphan root, but it's completely legitimate to have an orphaned root with a log attached. Fix this by simply skipping replaying the log. We still need to pin it's root node so that we do not overwrite it while replaying other logs, as we re-read the log root at every stage of the replay. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
40e046acbd |
Btrfs: fix missing data checksums after replaying a log tree
When logging a file that has shared extents (reflinked with other files or
with itself), we can end up logging multiple checksum items that cover
overlapping ranges. This confuses the search for checksums at log replay
time causing some checksums to never be added to the fs/subvolume tree.
Consider the following example of a file that shares the same extent at
offsets 0 and 256Kb:
[ bytenr 13893632, offset 64Kb, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 13893632, offset 0, len 256Kb ]
256Kb 512Kb
When logging the inode, at tree-log.c:copy_items(), when processing the
file extent item at offset 0, we log a checksum item covering the range
13959168 to 14024704, which corresponds to 13893632 + 64Kb and 13893632 +
64Kb + 64Kb, respectively.
Later when processing the extent item at offset 256K, we log the checksums
for the range from 13893632 to 14155776 (which corresponds to 13893632 +
256Kb). These checksums get merged with the checksum item for the range
from 13631488 to 13893632 (13631488 + 256Kb), logged by a previous fsync.
So after this we get the two following checksum items in the log tree:
(...)
item 6 key (EXTENT_CSUM EXTENT_CSUM 13631488) itemoff 3095 itemsize 512
range start 13631488 end 14155776 length 524288
item 7 key (EXTENT_CSUM EXTENT_CSUM 13959168) itemoff 3031 itemsize 64
range start 13959168 end 14024704 length 65536
The first one covers the range from the second one, they overlap.
So far this does not cause a problem after replaying the log, because
when replaying the file extent item for offset 256K, we copy all the
checksums for the extent 13893632 from the log tree to the fs/subvolume
tree, since searching for an checksum item for bytenr 13893632 leaves us
at the first checksum item, which covers the whole range of the extent.
However if we write 64Kb to file offset 256Kb for example, we will
not be able to find and copy the checksums for the last 128Kb of the
extent at bytenr 13893632, referenced by the file range 384Kb to 512Kb.
After writing 64Kb into file offset 256Kb we get the following extent
layout for our file:
[ bytenr 13893632, offset 64K, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 14155776, offset 0, len 64Kb ]
256Kb 320Kb
[ bytenr 13893632, offset 64Kb, len 192Kb ]
320Kb 512Kb
After fsync'ing the file, if we have a power failure and then mount
the filesystem to replay the log, the following happens:
1) When replaying the file extent item for file offset 320Kb, we
lookup for the checksums for the extent range from 13959168
(13893632 + 64Kb) to 14155776 (13893632 + 256Kb), through a call
to btrfs_lookup_csums_range();
2) btrfs_lookup_csums_range() finds the checksum item that starts
precisely at offset 13959168 (item 7 in the log tree, shown before);
3) However that checksum item only covers 64Kb of data, and not 192Kb
of data;
4) As a result only the checksums for the first 64Kb of data referenced
by the file extent item are found and copied to the fs/subvolume tree.
The remaining 128Kb of data, file range 384Kb to 512Kb, doesn't get
the corresponding data checksums found and copied to the fs/subvolume
tree.
5) After replaying the log userspace will not be able to read the file
range from 384Kb to 512Kb, because the checksums are missing and
resulting in an -EIO error.
The following steps reproduce this scenario:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -S 0xa3 0 256K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xc7 256K 256K" /mnt/sdc/foobar
$ xfs_io -c "reflink /mnt/sdc/foobar 320K 0 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xe5 256K 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
<power failure>
$ mount /dev/sdc /mnt/sdc
$ md5sum /mnt/sdc/foobar
md5sum: /mnt/sdc/foobar: Input/output error
$ dmesg | tail
[165305.003464] BTRFS info (device sdc): no csum found for inode 257 start 401408
[165305.004014] BTRFS info (device sdc): no csum found for inode 257 start 405504
[165305.004559] BTRFS info (device sdc): no csum found for inode 257 start 409600
[165305.005101] BTRFS info (device sdc): no csum found for inode 257 start 413696
[165305.005627] BTRFS info (device sdc): no csum found for inode 257 start 417792
[165305.006134] BTRFS info (device sdc): no csum found for inode 257 start 421888
[165305.006625] BTRFS info (device sdc): no csum found for inode 257 start 425984
[165305.007278] BTRFS info (device sdc): no csum found for inode 257 start 430080
[165305.008248] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
[165305.009550] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
Fix this simply by deleting first any checksums, from the log tree, for the
range of the extent we are logging at copy_items(). This ensures we do not
get checksum items in the log tree that have overlapping ranges.
This is a long time issue that has been present since we have the clone
(and deduplication) ioctl, and can happen both when an extent is shared
between different files and within the same file.
A test case for fstests follows soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
David Sterba
|
67439dadb0 |
btrfs: opencode extent_buffer_get
The helper is trivial and we can understand what the atomic_inc on something named refs does. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
4c66e0d424 |
btrfs: drop unused parameter is_new from btrfs_iget
The parameter is now always set to NULL and could be dropped. The last
user was get_default_root but that got reworked in
|
||
|
Nikolay Borisov
|
725af92a62 |
btrfs: Open-code name_in_log_ref in replay_one_name
That function adds unnecessary indirection between backref_in_log and the caller. Furthermore it also "downgrades" backref_in_log's return value to a boolean, when in fact it could very well be an error. Rectify the situation by simply opencoding name_in_log_ref in replay_one_name and properly handling possible return codes from backref_in_log. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update comment ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
d3316c8233 |
btrfs: Properly handle backref_in_log retval
This function can return a negative error value if btrfs_search_slot errors for whatever reason or if btrfs_alloc_path runs out of memory. This is currently problemattic because backref_in_log is treated by its callers as if it returns boolean. Fix this by adding proper error handling in callers. That also enables the function to return the direct error code from btrfs_search_slot. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
89cbf5f6b6 |
btrfs: Don't opencode btrfs_find_name_in_backref in backref_in_log
Direct replacement, though note that the inside of the loop in btrfs_find_name_in_backref is organized in a slightly different way but is equvalent. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add changelog ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
Linus Torvalds
|
f8779876d4 |
for-5.4-rc2-tag
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl2fQkoACgkQxWXV+ddt WDsXgA/+OpORcroqswa5V/AB5NgSMv08QfBtL7en7cUA2cGbrTt0lAoixIesCeGA 7y4umlx7zWDhrG0NFv8E21xxkMzK72/YQnN0C6ZwRCi+ZbPSDlpMCwSNV9b6oVt4 t9mJQ2kNZ80wj9W7jtoyiiWZ2OBccWywKBYr+BXybha5BliSd1XbpWMv90lODQHc 1oH1FOphPAf+nSEtW4g0BV8UHy1n1+7TqjEHDilj0TuHlO0MHsR2FQcsRnMBv5H/ CcEH3+870pUOjvm/l1OAdIrzrnH6UsXKHnOmJpYZIAQdG4xtHq/d6O9sfQMZK/Af VMXuju558kGOvrYdgffYa0HuW3P6c8q5BeEtGAZwjGsQS5GxmW63et/x+HIEl4RU 4SWMfD592GK1/yQn31NWGav7Olkr4L0Eh9iqfKk2nWayTV+pqs8NgkGumkoNB66n WJs2m2WwKvZzj1Ys9ilRzo17qt2U/m4eLQtbut3m5eYCpzvo38PDrqOVqKTZG/dc nG1JBJNk+yjV+RkOO0gnQ8/zzooEGvMhVIx5iq52tWjvxnvOGSVv9QAAkKrbMoOX kn/b3heL57Z+kilUU3Zd0GvVif+awIgOj+PmAevR+w3MLoJ2gLfWb7qcONdHyFPk jK7rsuP737fyHpZ1tvJyfTt4Lk/u1UbApKrO4QIku1r9IJmmu20= =zpDj -----END PGP SIGNATURE----- Merge tag 'for-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more stabitly fixes, one build warning fix. - fix inode allocation under NOFS context - fix leak in fiemap due to concurrent append writes - fix log-root tree updates - fix balance convert of single profile on 32bit architectures - silence false positive warning on old GCCs (code moved in rc1)" * tag 'for-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: silence maybe-uninitialized warning in clone_range btrfs: fix uninitialized ret in ref-verify btrfs: allocate new inode in NOFS context btrfs: fix balance convert to single on 32-bit host CPUs btrfs: fix incorrect updating of log root tree Btrfs: fix memory leak due to concurrent append writes with fiemap |
||
|
Josef Bacik
|
4203e96894 |
btrfs: fix incorrect updating of log root tree
We've historically had reports of being unable to mount file systems because the tree log root couldn't be read. Usually this is the "parent transid failure", but could be any of the related errors, including "fsid mismatch" or "bad tree block", depending on which block got allocated. The modification of the individual log root items are serialized on the per-log root root_mutex. This means that any modification to the per-subvol log root_item is completely protected. However we update the root item in the log root tree outside of the log root tree log_mutex. We do this in order to allow multiple subvolumes to be updated in each log transaction. This is problematic however because when we are writing the log root tree out we update the super block with the _current_ log root node information. Since these two operations happen independently of each other, you can end up updating the log root tree in between writing out the dirty blocks and setting the super block to point at the current root. This means we'll point at the new root node that hasn't been written out, instead of the one we should be pointing at. Thus whatever garbage or old block we end up pointing at complains when we mount the file system later and try to replay the log. Fix this by copying the log's root item into a local root item copy. Then once we're safely under the log_root_tree->log_mutex we update the root item in the log_root_tree. This way we do not modify the log_root_tree while we're committing it, fixing the problem. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Chris Mason <clm@fb.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Linus Torvalds
|
7d14df2d28 |
for-5.4-tag
-----BEGIN PGP SIGNATURE-----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=bY+a
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This continues with work on code refactoring, sanity checks and space
handling. There are some less user visible changes, nothing that would
particularly stand out.
User visible changes:
- tree checker, more sanity checks of:
- ROOT_ITEM (key, size, generation, level, alignment, flags)
- EXTENT_ITEM and METADATA_ITEM checks (key, size, offset,
alignment, refs)
- tree block reference items
- EXTENT_DATA_REF (key, hash, offset)
- deprecate flag BTRFS_SUBVOL_CREATE_ASYNC for subvolume creation
ioctl, scheduled removal in 5.7
- delete stale and unused UAPI definitions
BTRFS_DEV_REPLACE_ITEM_STATE_*
- improved export of debugging information available via existing
sysfs directory structure
- try harder to delete relations between qgroups and allow to delete
orphan entries
- remove unreliable space checks before relocation starts
Core:
- space handling:
- improved ticket reservations and other high level logic in
order to remove special cases
- factor flushing infrastructure and use it for different
contexts, allows to remove some special case handling
- reduce metadata reservation when only updating inodes
- reduce global block reserve minimum size (affects small
filesystems)
- improved overcommit logic wrt global block reserve
- tests:
- fix memory leaks in extent IO tree
- catch all TRIM range
Fixes:
- fix ENOSPC errors, leading to transaction aborts, when cloning
extents
- several fixes for inode number cache (mount option inode_cache)
- fix potential soft lockups during send when traversing large trees
- fix unaligned access to space cache pages with SLUB debug on
(PowerPC)
Other:
- refactoring public/private functions, moving to new or more
appropriate files
- defines converted to enums
- error handling improvements
- more assertions and comments
- old code deletion"
* tag 'for-5.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (138 commits)
btrfs: Relinquish CPUs in btrfs_compare_trees
btrfs: Don't assign retval of btrfs_try_tree_write_lock/btrfs_tree_read_lock_atomic
btrfs: create structure to encode checksum type and length
btrfs: turn checksum type define into an enum
btrfs: add enospc debug messages for ticket failure
btrfs: do not account global reserve in can_overcommit
btrfs: use btrfs_try_granting_tickets in update_global_rsv
btrfs: always reserve our entire size for the global reserve
btrfs: change the minimum global reserve size
btrfs: rename btrfs_space_info_add_old_bytes
btrfs: remove orig_bytes from reserve_ticket
btrfs: fix may_commit_transaction to deal with no partial filling
btrfs: rework wake_all_tickets
btrfs: refactor the ticket wakeup code
btrfs: stop partially refilling tickets when releasing space
btrfs: add space reservation tracepoint for reserved bytes
btrfs: roll tracepoint into btrfs_space_info_update helper
btrfs: do not allow reservations if we have pending tickets
btrfs: stop clearing EXTENT_DIRTY in inode I/O tree
btrfs: treat RWF_{,D}SYNC writes as sync for CRCs
...
|
||
|
Filipe Manana
|
410f954cb1 |
Btrfs: fix assertion failure during fsync and use of stale transaction
Sometimes when fsync'ing a file we need to log that other inodes exist and when we need to do that we acquire a reference on the inodes and then drop that reference using iput() after logging them. That generally is not a problem except if we end up doing the final iput() (dropping the last reference) on the inode and that inode has a link count of 0, which can happen in a very short time window if the logging path gets a reference on the inode while it's being unlinked. In that case we end up getting the eviction callback, btrfs_evict_inode(), invoked through the iput() call chain which needs to drop all of the inode's items from its subvolume btree, and in order to do that, it needs to join a transaction at the helper function evict_refill_and_join(). However because the task previously started a transaction at the fsync handler, btrfs_sync_file(), it has current->journal_info already pointing to a transaction handle and therefore evict_refill_and_join() will get that transaction handle from btrfs_join_transaction(). From this point on, two different problems can happen: 1) evict_refill_and_join() will often change the transaction handle's block reserve (->block_rsv) and set its ->bytes_reserved field to a value greater than 0. If evict_refill_and_join() never commits the transaction, the eviction handler ends up decreasing the reference count (->use_count) of the transaction handle through the call to btrfs_end_transaction(), and after that point we have a transaction handle with a NULL ->block_rsv (which is the value prior to the transaction join from evict_refill_and_join()) and a ->bytes_reserved value greater than 0. If after the eviction/iput completes the inode logging path hits an error or it decides that it must fallback to a transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a non-zero value from btrfs_log_dentry_safe(), and because of that non-zero value it tries to commit the transaction using a handle with a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes the transaction commit hit an assertion failure at btrfs_trans_release_metadata() because ->bytes_reserved is not zero but the ->block_rsv is NULL. The produced stack trace for that is like the following: [192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816 [192922.917553] ------------[ cut here ]------------ [192922.917922] kernel BUG at fs/btrfs/ctree.h:3532! [192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G W 5.1.4-btrfs-next-47 #1 [192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs] (...) [192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286 [192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000 [192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838 [192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000 [192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980 [192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8 [192922.923200] FS: 00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000 [192922.923579] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0 [192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [192922.925105] Call Trace: [192922.925505] btrfs_trans_release_metadata+0x10c/0x170 [btrfs] [192922.925911] btrfs_commit_transaction+0x3e/0xaf0 [btrfs] [192922.926324] btrfs_sync_file+0x44c/0x490 [btrfs] [192922.926731] do_fsync+0x38/0x60 [192922.927138] __x64_sys_fdatasync+0x13/0x20 [192922.927543] do_syscall_64+0x60/0x1c0 [192922.927939] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [192922.934077] ---[ end trace f00808b12068168f ]--- 2) If evict_refill_and_join() decides to commit the transaction, it will be able to do it, since the nested transaction join only increments the transaction handle's ->use_count reference counter and it does not prevent the transaction from getting committed. This means that after eviction completes, the fsync logging path will be using a transaction handle that refers to an already committed transaction. What happens when using such a stale transaction can be unpredictable, we are at least having a use-after-free on the transaction handle itself, since the transaction commit will call kmem_cache_free() against the handle regardless of its ->use_count value, or we can end up silently losing all the updates to the log tree after that iput() in the logging path, or using a transaction handle that in the meanwhile was allocated to another task for a new transaction, etc, pretty much unpredictable what can happen. In order to fix both of them, instead of using iput() during logging, use btrfs_add_delayed_iput(), so that the logging path of fsync never drops the last reference on an inode, that step is offloaded to a safe context (usually the cleaner kthread). The assertion failure issue was sporadically triggered by the test case generic/475 from fstests, which loads the dm error target while fsstress is running, which lead to fsync failing while logging inodes with -EIO errors and then trying later to commit the transaction, triggering the assertion failure. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
c82f823c9b |
btrfs: tie extent buffer and it's token together
Further simplifaction of the get/set helpers is possible when the token is uniquely tied to an extent buffer. A condition and an assignment can be avoided. The initializations are moved closer to the first use when the extent buffer is valid. There's one exception in __push_leaf_left where the token is reused. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
6ff49c6ad2 |
btrfs: Make btrfs_find_name_in_ext_backref return struct btrfs_inode_extref
btrfs_find_name_in_ext_backref returns either 0/1 depending on whether it found a backref for the given name. If it returns true then the actual inode_ref struct is returned in one of its parameters. That's pointless, instead refactor the function such that it returns either a pointer to the btrfs_inode_extref or NULL it it didn't find anything. This streamlines the function calling convention. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
9bb8407f54 |
btrfs: Make btrfs_find_name_in_backref return btrfs_inode_ref struct
btrfs_find_name_in_backref returns either 0/1 depending on whether it found a backref for the given name. If it returns true then the actual inode_ref struct is returned in one of its parameters. That's pointless, instead refactor the function such that it returns either a pointer to the btrfs_inode_ref or NULL it it didn't find anything. This streamlines the function calling convention. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
602cbe91fb |
btrfs: move cond_wake_up functions out of ctree
The file ctree.h serves as a header for everything and has become quite bloated. Split some helpers that are generic and create a new file that should be the catch-all for code that's not btrfs-specific. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
430a662602 |
btrfs: tree-log: use symbolic name for first replay stage
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
e13976cf12 |
btrfs: tree-log: convert defines to enums
Used only for in-memory state tracking. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
e678934cbe |
btrfs: Remove unnecessary check from join_running_log_trans
join_running_log_trans checks btrfs_root::log_root outside of btrfs_root::log_mutex to avoid contention on the mutex. Turns out this check is not necessary because the two callers of join_running_log_trans (both of which deal with removing entries from the tree-log during unlink) explicitly check whether the respective inode has been logged in the current transaction. If it hasn't then it won't have any items in the tree-log and call path will return before calling join_running_log_trans. If the check passes, however, then it's guaranteed that btrfs_root::log_root is set because the inode is logged. Those guarantees allows us to remove the speculative as well as the implicity and tricky memory barrier. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
803f0f64d1 |
Btrfs: fix fsync not persisting dentry deletions due to inode evictions
In order to avoid searches on a log tree when unlinking an inode, we check
if the inode being unlinked was logged in the current transaction, as well
as the inode of its parent directory. When any of the inodes are logged,
we proceed to delete directory items and inode reference items from the
log, to ensure that if a subsequent fsync of only the inode being unlinked
or only of the parent directory when the other is not fsync'ed as well,
does not result in the entry still existing after a power failure.
That check however is not reliable when one of the inodes involved (the
one being unlinked or its parent directory's inode) is evicted, since the
logged_trans field is transient, that is, it is not stored on disk, so it
is lost when the inode is evicted and loaded into memory again (which is
set to zero on load). As a consequence the checks currently being done by
btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log() always
return true if the inode was evicted before, regardless of the inode
having been logged or not before (and in the current transaction), this
results in the dentry being unlinked still existing after a log replay
if after the unlink operation only one of the inodes involved is fsync'ed.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ touch /mnt/dir/foo
$ xfs_io -c fsync /mnt/dir/foo
# Keep an open file descriptor on our directory while we evict inodes.
# We just want to evict the file's inode, the directory's inode must not
# be evicted.
$ ( cd /mnt/dir; while true; do :; done ) &
$ pid=$!
# Wait a bit to give time to background process to chdir to our test
# directory.
$ sleep 0.5
# Trigger eviction of the file's inode.
$ echo 2 > /proc/sys/vm/drop_caches
# Unlink our file and fsync the parent directory. After a power failure
# we don't expect to see the file anymore, since we fsync'ed the parent
# directory.
$ rm -f $SCRATCH_MNT/dir/foo
$ xfs_io -c fsync /mnt/dir
<power failure>
$ mount /dev/sdb /mnt
$ ls /mnt/dir
foo
$
--> file still there, unlink not persisted despite explicit fsync on dir
Fix this by checking if the inode has the full_sync bit set in its runtime
flags as well, since that bit is set everytime an inode is loaded from
disk, or for other less common cases such as after a shrinking truncate
or failure to allocate extent maps for holes, and gets cleared after the
first fsync. Also consider the inode as possibly logged only if it was
last modified in the current transaction (besides having the full_fsync
flag set).
Fixes:
|
||
|
Filipe Manana
|
d1d832a0b5 |
Btrfs: fix data loss after inode eviction, renaming it, and fsync it
When we log an inode, regardless of logging it completely or only that it
exists, we always update it as logged (logged_trans and last_log_commit
fields of the inode are updated). This is generally fine and avoids future
attempts to log it from having to do repeated work that brings no value.
However, if we write data to a file, then evict its inode after all the
dealloc was flushed (and ordered extents completed), rename the file and
fsync it, we end up not logging the new extents, since the rename may
result in logging that the inode exists in case the parent directory was
logged before. The following reproducer shows and explains how this can
happen:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ touch /mnt/dir/foo
$ touch /mnt/dir/bar
# Do a direct IO write instead of a buffered write because with a
# buffered write we would need to make sure dealloc gets flushed and
# complete before we do the inode eviction later, and we can not do that
# from user space with call to things such as sync(2) since that results
# in a transaction commit as well.
$ xfs_io -d -c "pwrite -S 0xd3 0 4K" /mnt/dir/bar
# Keep the directory dir in use while we evict inodes. We want our file
# bar's inode to be evicted but we don't want our directory's inode to
# be evicted (if it were evicted too, we would not be able to reproduce
# the issue since the first fsync below, of file foo, would result in a
# transaction commit.
$ ( cd /mnt/dir; while true; do :; done ) &
$ pid=$!
# Wait a bit to give time for the background process to chdir.
$ sleep 0.1
# Evict all inodes, except the inode for the directory dir because it is
# currently in use by our background process.
$ echo 2 > /proc/sys/vm/drop_caches
# fsync file foo, which ends up persisting information about the parent
# directory because it is a new inode.
$ xfs_io -c fsync /mnt/dir/foo
# Rename bar, this results in logging that this inode exists (inode item,
# names, xattrs) because the parent directory is in the log.
$ mv /mnt/dir/bar /mnt/dir/baz
# Now fsync baz, which ends up doing absolutely nothing because of the
# rename operation which logged that the inode exists only.
$ xfs_io -c fsync /mnt/dir/baz
<power failure>
$ mount /dev/sdb /mnt
$ od -t x1 -A d /mnt/dir/baz
0000000
--> Empty file, data we wrote is missing.
Fix this by not updating last_sub_trans of an inode when we are logging
only that it exists and the inode was not yet logged since it was loaded
from disk (full_sync bit set), this is enough to make btrfs_inode_in_log()
return false for this scenario and make us log the inode. The logged_trans
of the inode is still always setsince that alone is used to track if names
need to be deleted as part of unlink operations.
Fixes:
|
||
|
Filipe Manana
|
06989c799f |
Btrfs: fix race updating log root item during fsync
When syncing the log, the final phase of a fsync operation, we need to
either create a log root's item or update the existing item in the log
tree of log roots, and that depends on the current value of the log
root's log_transid - if it's 1 we need to create the log root item,
otherwise it must exist already and we update it. Since there is no
synchronization between updating the log_transid and checking it for
deciding whether the log root's item needs to be created or updated, we
end up with a tiny race window that results in attempts to update the
item to fail because the item was not yet created:
CPU 1 CPU 2
btrfs_sync_log()
lock root->log_mutex
set log root's log_transid to 1
unlock root->log_mutex
btrfs_sync_log()
lock root->log_mutex
sets log root's
log_transid to 2
unlock root->log_mutex
update_log_root()
sees log root's log_transid
with a value of 2
calls btrfs_update_root(),
which fails with -EUCLEAN
and causes transaction abort
Until recently the race lead to a BUG_ON at btrfs_update_root(), but after
the recent commit
|
||
|
Filipe Manana
|
60d9f50308 |
Btrfs: fix fsync not persisting changed attributes of a directory
While logging an inode we follow its ancestors and for each one we mark
it as logged in the current transaction, even if we have not logged it.
As a consequence if we change an attribute of an ancestor, such as the
UID or GID for example, and then explicitly fsync it, we end up not
logging the inode at all despite returning success to user space, which
results in the attribute being lost if a power failure happens after
the fsync.
Sample reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ chown 6007:6007 /mnt/dir
$ sync
$ chown 9003:9003 /mnt/dir
$ touch /mnt/dir/file
$ xfs_io -c fsync /mnt/dir/file
# fsync our directory after fsync'ing the new file, should persist the
# new values for the uid and gid.
$ xfs_io -c fsync /mnt/dir
<power failure>
$ mount /dev/sdb /mnt
$ stat -c %u:%g /mnt/dir
6007:6007
--> should be 9003:9003, the uid and gid were not persisted, despite
the explicit fsync on the directory prior to the power failure
Fix this by not updating the logged_trans field of ancestor inodes when
logging an inode, since we have not logged them. Let only future calls to
btrfs_log_inode() to mark inodes as logged.
This could be triggered by my recent fsync fuzz tester for fstests, for
which an fstests patch exists titled "fstests: generic, fsync fuzz tester
with fsstress".
Fixes:
|
||
|
Filipe Manana
|
ebb929060a |
Btrfs: avoid fallback to transaction commit during fsync of files with holes
When we are doing a full fsync (bit BTRFS_INODE_NEEDS_FULL_SYNC set) of a
file that has holes and has file extent items spanning two or more leafs,
we can end up falling to back to a full transaction commit due to a logic
bug that leads to failure to insert a duplicate file extent item that is
meant to represent a hole between the last file extent item of a leaf and
the first file extent item in the next leaf. The failure (EEXIST error)
leads to a transaction commit (as most errors when logging an inode do).
For example, we have the two following leafs:
Leaf N:
-----------------------------------------------
| ..., ..., ..., (257, FILE_EXTENT_ITEM, 64K) |
-----------------------------------------------
The file extent item at the end of leaf N has a length of 4Kb,
representing the file range from 64K to 68K - 1.
Leaf N + 1:
-----------------------------------------------
| (257, FILE_EXTENT_ITEM, 72K), ..., ..., ... |
-----------------------------------------------
The file extent item at the first slot of leaf N + 1 has a length of
4Kb too, representing the file range from 72K to 76K - 1.
During the full fsync path, when we are at tree-log.c:copy_items() with
leaf N as a parameter, after processing the last file extent item, that
represents the extent at offset 64K, we take a look at the first file
extent item at the next leaf (leaf N + 1), and notice there's a 4K hole
between the two extents, and therefore we insert a file extent item
representing that hole, starting at file offset 68K and ending at offset
72K - 1. However we don't update the value of *last_extent, which is used
to represent the end offset (plus 1, non-inclusive end) of the last file
extent item inserted in the log, so it stays with a value of 68K and not
with a value of 72K.
Then, when copy_items() is called for leaf N + 1, because the value of
*last_extent is smaller then the offset of the first extent item in the
leaf (68K < 72K), we look at the last file extent item in the previous
leaf (leaf N) and see it there's a 4K gap between it and our first file
extent item (again, 68K < 72K), so we decide to insert a file extent item
representing the hole, starting at file offset 68K and ending at offset
72K - 1, this insertion will fail with -EEXIST being returned from
btrfs_insert_file_extent() because we already inserted a file extent item
representing a hole for this offset (68K) in the previous call to
copy_items(), when processing leaf N.
The -EEXIST error gets propagated to the fsync callback, btrfs_sync_file(),
which falls back to a full transaction commit.
Fix this by adjusting *last_extent after inserting a hole when we had to
look at the next leaf.
Fixes:
|
||
|
Filipe Manana
|
b8aa330d2a |
Btrfs: improve performance on fsync of files with multiple hardlinks
Commit
|
||
|
David Sterba
|
c71dd88007 |
btrfs: remove unused parameter fs_info from btrfs_extend_item
Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
78ac4f9e5a |
btrfs: remove unused parameter fs_info from btrfs_truncate_item
Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
82fa113fcc |
btrfs: extent-tree: Use btrfs_ref to refactor btrfs_inc_extent_ref()
Use the new btrfs_ref structure and replace parameter list to clean up the usage of owner and level to distinguish the extent types. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
907877664e |
btrfs: get fs_info from trans in btrfs_set_log_full_commit
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
4884b8e8eb |
btrfs: get fs_info from trans in btrfs_need_log_full_commit
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
6a884d7d52 |
btrfs: get fs_info from eb in clean_tree_block
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
bcdc428cfe |
btrfs: get fs_info from eb in btrfs_exclude_logged_extents
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
247462a5ac |
btrfs: move tree block wait and write helpers to tree-log
The wrapper names better describe what's happening so they're not deleted though they're trivial, but at least moved closer to their place of use. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
0ccc3876e4 |
Btrfs: fix assertion failure on fsync with NO_HOLES enabled
Back in commit |
||
|
Josef Bacik
|
2cc8334270 |
btrfs: remove WARN_ON in log_dir_items
When Filipe added the recursive directory logging stuff in
|
||
|
Filipe Manana
|
bf504110bc |
Btrfs: fix incorrect file size after shrinking truncate and fsync
If we do a shrinking truncate against an inode which is already present in the respective log tree and then rename it, as part of logging the new name we end up logging an inode item that reflects the old size of the file (the one which we previously logged) and not the new smaller size. The decision to preserve the size previously logged was added by commit |
||
|
Filipe Manana
|
cbca7d59fe |
Btrfs: add missing error handling after doing leaf/node binary search
The function map_private_extent_buffer() can return an -EINVAL error, and it is called by generic_bin_search() which will return back the error. The btrfs_bin_search() function in turn calls generic_bin_search() and the key_search() function calls btrfs_bin_search(), so both can return the -EINVAL error coming from the map_private_extent_buffer() function. Some callers of these functions were ignoring that these functions can return an error, so fix them to deal with error return values. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
a3baaf0d78 |
Btrfs: fix fsync after succession of renames and unlink/rmdir
After a succession of renames operations of different files and unlinking one of them, if we fsync one of the renamed files we can end up with a log that will either fail to replay at mount time or result in a filesystem that is in an inconsistent state. One example scenario: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/testdir $ touch /mnt/testdir/fname1 $ touch /mnt/testdir/fname2 $ sync $ mv /mnt/testdir/fname1 /mnt/testdir/fname3 $ rm -f /mnt/testdir/fname2 $ ln /mnt/testdir/fname3 /mnt/testdir/fname2 $ touch /mnt/testdir/fname1 $ xfs_io -c "fsync" /mnt/testdir/fname1 <power failure> $ mount /dev/sdb /mnt $ umount /mnt $ btrfs check /dev/sdb [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 5 inode 259 errors 2, no orphan item ERROR: errors found in fs roots Opening filesystem to check... Checking filesystem on /dev/sdc UUID: 20e4abb8-5a19-4492-8bb4-6084125c2d0d found 393216 bytes used, error(s) found total csum bytes: 0 total tree bytes: 131072 total fs tree bytes: 32768 total extent tree bytes: 16384 btree space waste bytes: 122986 file data blocks allocated: 262144 referenced 262144 On a kernel without the first patch in this series, titled "[PATCH] Btrfs: fix fsync after succession of renames of different files", we get instead an error when mounting the filesystem due to failure of replaying the log: $ mount /dev/sdb /mnt mount: mount /dev/sdb on /mnt failed: File exists Fix this by logging the parent directory of an inode whenever we find an inode that no longer exists (was unlinked in the current transaction), during the procedure which finds inodes that have old names that collide with new names of other inodes. A test case for fstests follows soon. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
6b5fc433a7 |
Btrfs: fix fsync after succession of renames of different files
After a succession of rename operations of different files and fsyncing one of them, such that each file gets a new name that corresponds to an old name of another file, we can end up with a log that will cause a failure when attempted to replay at mount time (an EEXIST error). We currently have correct behaviour when such succession of renames involves only two files, but if there are more files involved, we end up not logging all the inodes that are needed, therefore resulting in a failure when attempting to replay the log. Example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/testdir $ touch /mnt/testdir/fname1 $ touch /mnt/testdir/fname2 $ sync $ mv /mnt/testdir/fname1 /mnt/testdir/fname3 $ mv /mnt/testdir/fname2 /mnt/testdir/fname4 $ ln /mnt/testdir/fname3 /mnt/testdir/fname2 $ touch /mnt/testdir/fname1 $ xfs_io -c "fsync" /mnt/testdir/fname1 <power failure> $ mount /dev/sdb /mnt mount: mount /dev/sdb on /mnt failed: File exists So fix this by checking all inode dependencies when logging an inode. That is, if one logged inode A has a new name that matches the old name of some other inode B, check if inode B has a new name that matches the old name of some other inode C, and so on. This fix is implemented not by doing any recursive function calls but by using an iterative method using a linked list that is used in a first-in-first-out fashion. A test case for fstests follows soon. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
8bead25820 |
btrfs: open code now trivial btrfs_set_lock_blocking
btrfs_set_lock_blocking is now only a simple wrapper around btrfs_set_lock_blocking_write. The name does not bring any semantic value that could not be inferred from the new function so there's no point keeping it. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Andrea Gelmini
|
52042d8e82 |
btrfs: Fix typos in comments and strings
The typos accumulate over time so once in a while time they get fixed in a large patch. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
41bd606769 |
Btrfs: fix fsync of files with multiple hard links in new directories
The log tree has a long standing problem that when a file is fsync'ed we only check for new ancestors, created in the current transaction, by following only the hard link for which the fsync was issued. We follow the ancestors using the VFS' dget_parent() API. This means that if we create a new link for a file in a directory that is new (or in an any other new ancestor directory) and then fsync the file using an old hard link, we end up not logging the new ancestor, and on log replay that new hard link and ancestor do not exist. In some cases, involving renames, the file will not exist at all. Example: mkfs.btrfs -f /dev/sdb mount /dev/sdb /mnt mkdir /mnt/A touch /mnt/foo ln /mnt/foo /mnt/A/bar xfs_io -c fsync /mnt/foo <power failure> In this example after log replay only the hard link named 'foo' exists and directory A does not exist, which is unexpected. In other major linux filesystems, such as ext4, xfs and f2fs for example, both hard links exist and so does directory A after mounting again the filesystem. Checking if any new ancestors are new and need to be logged was added in 2009 by commit |
||
|
Filipe Manana
|
59b0713a8a |
Btrfs: simpler and more efficient cleanup of a log tree's extent io tree
We currently are in a loop finding each range (corresponding to a btree node/leaf) in a log root's extent io tree and then clean it up. This is a waste of time since we are traversing the extent io tree's rb_tree more times then needed (one for a range lookup and another for cleaning it up) without any good reason. We free the log trees when we are in the critical section of a transaction commit (the transaction state is set to TRANS_STATE_COMMIT_DOING), so it's of great convenience to do everything as fast as possible in order to reduce the time we block other tasks from starting a new transaction. So fix this by traversing the extent io tree once and cleaning up all its records in one go while traversing it. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
ce02f03266 |
Btrfs: remove no longer used logged range variables when logging extents
The logged_start and logged_end variables, at btrfs_log_changed_extents, were added in commit |
||
|
Filipe Manana
|
008c6753f7 |
Btrfs: fix missing data checksums after a ranged fsync (msync)
Recently we got a massive simplification for fsync, where for the fast
path we no longer log new extents while their respective ordered extents
are still running.
However that simplification introduced a subtle regression for the case
where we use a ranged fsync (msync). Consider the following example:
CPU 0 CPU 1
mmap write to range [2Mb, 4Mb[
mmap write to range [512Kb, 1Mb[
msync range [512K, 1Mb[
--> triggers fast fsync
(BTRFS_INODE_NEEDS_FULL_SYNC
not set)
--> creates extent map A for this
range and adds it to list of
modified extents
--> starts ordered extent A for
this range
--> waits for it to complete
writeback triggered for range
[2Mb, 4Mb[
--> create extent map B and
adds it to the list of
modified extents
--> creates ordered extent B
--> start looking for and logging
modified extents
--> logs extent maps A and B
--> finds checksums for extent A
in the csum tree, but not for
extent B
fsync (msync) finishes
--> ordered extent B
finishes and its
checksums are added
to the csum tree
<power cut>
After replaying the log, we have the extent covering the range [2Mb, 4Mb[
but do not have the data checksum items covering that file range.
This happens because at the very beginning of an fsync (btrfs_sync_file())
we start and wait for IO in the given range [512Kb, 1Mb[ and therefore
wait for any ordered extents in that range to complete before we start
logging the extents. However if right before we start logging the extent
in our range [512Kb, 1Mb[, writeback is started for any other dirty range,
such as the range [2Mb, 4Mb[ due to memory pressure or a concurrent fsync
or msync (btrfs_sync_file() starts writeback before acquiring the inode's
lock), an ordered extent is created for that other range and a new extent
map is created to represent that range and added to the inode's list of
modified extents.
That means that we will see that other extent in that list when collecting
extents for logging (done at btrfs_log_changed_extents()) and log the
extent before the respective ordered extent finishes - namely before the
checksum items are added to the checksums tree, which is where
log_extent_csums() looks for the checksums, therefore making us log an
extent without logging its checksums. Before that massive simplification
of fsync, this wasn't a problem because besides looking for checkums in
the checksums tree, we also looked for them in any ordered extent still
running.
The consequence of data checksums missing for a file range is that users
attempting to read the affected file range will get -EIO errors and dmesg
reports the following:
[10188.358136] BTRFS info (device sdc): no csum found for inode 297 start 57344
[10188.359278] BTRFS warning (device sdc): csum failed root 5 ino 297 off 57344 csum 0x98f94189 expected csum 0x00000000 mirror 1
So fix this by skipping extents outside of our logging range at
btrfs_log_changed_extents() and leaving them on the list of modified
extents so that any subsequent ranged fsync may collect them if needed.
Also, if we find a hole extent outside of the range still log it, just
to prevent having gaps between extent items after replaying the log,
otherwise fsck will complain when we are not using the NO_HOLES feature
(fstest btrfs/056 triggers such case).
Fixes:
|
||
|
Josef Bacik
|
c495144bc6 |
btrfs: move the dio_sem higher up the callchain
We're getting a lockdep splat because we take the dio_sem under the log_mutex. What we really need is to protect fsync() from logging an extent map for an extent we never waited on higher up, so just guard the whole thing with dio_sem. ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 #411 Not tainted ------------------------------------------------------ aio-dio-invalid/30928 is trying to acquire lock: 0000000092621cfd (&mm->mmap_sem){++++}, at: get_user_pages_unlocked+0x5a/0x1e0 but task is already holding lock: 00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&ei->dio_sem){++++}: lock_acquire+0xbd/0x220 down_write+0x51/0xb0 btrfs_log_changed_extents+0x80/0xa40 btrfs_log_inode+0xbaf/0x1000 btrfs_log_inode_parent+0x26f/0xa80 btrfs_log_dentry_safe+0x50/0x70 btrfs_sync_file+0x357/0x540 do_fsync+0x38/0x60 __ia32_sys_fdatasync+0x12/0x20 do_fast_syscall_32+0x9a/0x2f0 entry_SYSENTER_compat+0x84/0x96 -> #4 (&ei->log_mutex){+.+.}: lock_acquire+0xbd/0x220 __mutex_lock+0x86/0xa10 btrfs_record_unlink_dir+0x2a/0xa0 btrfs_unlink+0x5a/0xc0 vfs_unlink+0xb1/0x1a0 do_unlinkat+0x264/0x2b0 do_fast_syscall_32+0x9a/0x2f0 entry_SYSENTER_compat+0x84/0x96 -> #3 (sb_internal#2){.+.+}: lock_acquire+0xbd/0x220 __sb_start_write+0x14d/0x230 start_transaction+0x3e6/0x590 btrfs_evict_inode+0x475/0x640 evict+0xbf/0x1b0 btrfs_run_delayed_iputs+0x6c/0x90 cleaner_kthread+0x124/0x1a0 kthread+0x106/0x140 ret_from_fork+0x3a/0x50 -> #2 (&fs_info->cleaner_delayed_iput_mutex){+.+.}: lock_acquire+0xbd/0x220 __mutex_lock+0x86/0xa10 btrfs_alloc_data_chunk_ondemand+0x197/0x530 btrfs_check_data_free_space+0x4c/0x90 btrfs_delalloc_reserve_space+0x20/0x60 btrfs_page_mkwrite+0x87/0x520 do_page_mkwrite+0x31/0xa0 __handle_mm_fault+0x799/0xb00 handle_mm_fault+0x7c/0xe0 __do_page_fault+0x1d3/0x4a0 async_page_fault+0x1e/0x30 -> #1 (sb_pagefaults){.+.+}: lock_acquire+0xbd/0x220 __sb_start_write+0x14d/0x230 btrfs_page_mkwrite+0x6a/0x520 do_page_mkwrite+0x31/0xa0 __handle_mm_fault+0x799/0xb00 handle_mm_fault+0x7c/0xe0 __do_page_fault+0x1d3/0x4a0 async_page_fault+0x1e/0x30 -> #0 (&mm->mmap_sem){++++}: __lock_acquire+0x42e/0x7a0 lock_acquire+0xbd/0x220 down_read+0x48/0xb0 get_user_pages_unlocked+0x5a/0x1e0 get_user_pages_fast+0xa4/0x150 iov_iter_get_pages+0xc3/0x340 do_direct_IO+0xf93/0x1d70 __blockdev_direct_IO+0x32d/0x1c20 btrfs_direct_IO+0x227/0x400 generic_file_direct_write+0xcf/0x180 btrfs_file_write_iter+0x308/0x58c aio_write+0xf8/0x1d0 io_submit_one+0x3a9/0x620 __ia32_compat_sys_io_submit+0xb2/0x270 do_int80_syscall_32+0x5b/0x1a0 entry_INT80_compat+0x88/0xa0 other info that might help us debug this: Chain exists of: &mm->mmap_sem --> &ei->log_mutex --> &ei->dio_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->dio_sem); lock(&ei->log_mutex); lock(&ei->dio_sem); lock(&mm->mmap_sem); *** DEADLOCK *** 1 lock held by aio-dio-invalid/30928: #0: 00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400 stack backtrace: CPU: 0 PID: 30928 Comm: aio-dio-invalid Not tainted 4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 #411 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Call Trace: dump_stack+0x7c/0xbb print_circular_bug.isra.37+0x297/0x2a4 check_prev_add.constprop.45+0x781/0x7a0 ? __lock_acquire+0x42e/0x7a0 validate_chain.isra.41+0x7f0/0xb00 __lock_acquire+0x42e/0x7a0 lock_acquire+0xbd/0x220 ? get_user_pages_unlocked+0x5a/0x1e0 down_read+0x48/0xb0 ? get_user_pages_unlocked+0x5a/0x1e0 get_user_pages_unlocked+0x5a/0x1e0 get_user_pages_fast+0xa4/0x150 iov_iter_get_pages+0xc3/0x340 do_direct_IO+0xf93/0x1d70 ? __alloc_workqueue_key+0x358/0x490 ? __blockdev_direct_IO+0x14b/0x1c20 __blockdev_direct_IO+0x32d/0x1c20 ? btrfs_run_delalloc_work+0x40/0x40 ? can_nocow_extent+0x490/0x490 ? kvm_clock_read+0x1f/0x30 ? can_nocow_extent+0x490/0x490 ? btrfs_run_delalloc_work+0x40/0x40 btrfs_direct_IO+0x227/0x400 ? btrfs_run_delalloc_work+0x40/0x40 generic_file_direct_write+0xcf/0x180 btrfs_file_write_iter+0x308/0x58c aio_write+0xf8/0x1d0 ? kvm_clock_read+0x1f/0x30 ? __might_fault+0x3e/0x90 io_submit_one+0x3a9/0x620 ? io_submit_one+0xe5/0x620 __ia32_compat_sys_io_submit+0xb2/0x270 do_int80_syscall_32+0x5b/0x1a0 entry_INT80_compat+0x88/0xa0 CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
7ed586d0a8 |
Btrfs: fix assertion on fsync of regular file when using no-holes feature
When using the NO_HOLES feature and logging a regular file, we were
expecting that if we find an inline extent, that either its size in RAM
(uncompressed and unenconded) matches the size of the file or if it does
not, that it matches the sector size and it represents compressed data.
This assertion does not cover a case where the length of the inline extent
is smaller than the sector size and also smaller the file's size, such
case is possible through fallocate. Example:
$ mkfs.btrfs -f -O no-holes /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xb60 0 21" /mnt/foobar
$ xfs_io -c "falloc 40 40" /mnt/foobar
$ xfs_io -c "fsync" /mnt/foobar
In the above example we trigger the assertion because the inline extent's
length is 21 bytes while the file size is 80 bytes. The fallocate() call
merely updated the file's size and did not touch the existing inline
extent, as expected.
So fix this by adjusting the assertion so that an inline extent length
smaller than the file size is valid if the file size is smaller than the
filesystem's sector size.
A test case for fstests follows soon.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes:
|
||
|
Filipe Manana
|
0f375eed92 |
Btrfs: fix wrong dentries after fsync of file that got its parent replaced
In a scenario like the following: mkdir /mnt/A # inode 258 mkdir /mnt/B # inode 259 touch /mnt/B/bar # inode 260 sync mv /mnt/B/bar /mnt/A/bar mv -T /mnt/A /mnt/B fsync /mnt/B/bar <power fail> After replaying the log we end up with file bar having 2 hard links, both with the name 'bar' and one in the directory with inode number 258 and the other in the directory with inode number 259. Also, we end up with the directory inode 259 still existing and with the directory inode 258 still named as 'A', instead of 'B'. In this scenario, file 'bar' should only have one hard link, located at directory inode 258, the directory inode 259 should not exist anymore and the name for directory inode 258 should be 'B'. This incorrect behaviour happens because when attempting to log the old parents of an inode, we skip any parents that no longer exist. Fix this by forcing a full commit if an old parent no longer exists. A test case for fstests follows soon. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |