New helpers on/offline_css() respectively wrap ->post_create() and
->pre_destroy() invocations. online_css() sets CSS_ONLINE after
->post_create() is complete and offline_css() invokes ->pre_destroy()
iff CSS_ONLINE is set and clears it while also handling the temporary
dropping of cgroup_mutex.
This patch doesn't introduce any behavior change at the moment but
will be used to improve cgroup_create() failure path and allow
->post_create() to fail.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Separate out cgroup_destroy_locked() from cgroup_destroy(). This will
be later used in cgroup_create() failure path.
While at it, add lockdep asserts on i_mutex and cgroup_mutex, and move
@d and @parent assignments to their declarations.
This patch doesn't introduce any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
* If idr init fails, cgroup_load_subsys() cleared dummytop->subsys[]
before calilng ->destroy() making CSS inaccessible to the callback,
and didn't unlink ss->sibling. As no modular controller uses
->use_id, this doesn't cause any actual problems.
* cgroup_unload_subsys() was forgetting to free idr, call
->pre_destroy() and clear ->active. As there currently is no
modular controller which uses ->use_id, ->pre_destroy() or ->active,
this doesn't cause any actual problems.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Make cgroup_init_subsys() grab cgroup_mutex while initializing a
subsystem so that all helpers and callbacks are called under the
context they expect. This isn't strictly necessary as
cgroup_init_subsys() doesn't race with anybody but will allow adding
lockdep assertions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Consistently use @css and @dummytop in these two functions instead of
referring to them indirectly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, CSS_* flags are defined as bit positions and manipulated
using atomic bitops. There's no reason to use atomic bitops for them
and bit positions are clunkier to deal with than bit masks. Make
CSS_* bit masks instead and use the usual C bitwise operators to
access them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup->dentry is marked and used as a RCU pointer; however, it isn't
one - the final dentry put doesn't go through call_rcu(). cgroup and
dentry share the same RCU freeing rule via synchronize_rcu() in
cgroup_diput() (kfree_rcu() used on cgrp is unnecessary). If cgrp is
accessible under RCU read lock, so is its dentry and dereferencing
cgrp->dentry doesn't need any further RCU protection or annotation.
While not being accurate, before the previous patch, the RCU accessors
served a purpose as memory barriers - cgroup->dentry used to be
assigned after the cgroup was made visible to cgroup_path(), so the
assignment and dereferencing in cgroup_path() needed the memory
barrier pair. Now that list_add_tail_rcu() happens after
cgroup->dentry is assigned, this no longer is necessary.
Remove the now unnecessary and misleading RCU annotations from
cgroup->dentry. To make up for the removal of rcu_dereference_check()
in cgroup_path(), add an explicit rcu_lockdep_assert(), which asserts
the dereference rule of @cgrp, not cgrp->dentry.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
While creating a new cgroup, cgroup_create() links the newly allocated
cgroup into various places before trying to create its directory.
Because cgroup life-cycle is tied to the vfs objects, this makes it
impossible to use cgroup_rmdir() for rolling back creation - the
removal logic depends on having full vfs objects.
This patch moves directory creation above linking and collect linking
operations to one place. This allows directory creation failure to
share error exit path with css allocation failures and any failure
sites afterwards (to be added later) can use cgroup_rmdir() logic to
undo creation.
Note that this also makes the memory barriers around cgroup->dentry,
which currently is misleadingly using RCU operations, unnecessary.
This will be handled in the next patch.
While at it, locking BUG_ON() on i_mutex is converted to
lockdep_assert_held().
v2: Patch originally removed %NULL dentry check in cgroup_path();
however, Li pointed out that this patch doesn't make it
unnecessary as ->create() may call cgroup_path(). Drop the
change for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
The operation order of cgroup creation is about to change and
cgroup_create_dir() is more of a hindrance than a proper abstraction.
Open-code it by moving the parent nlink adjustment next to self nlink
adjustment in cgroup_create_file() and the rest to cgroup_create().
This patch doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Not strictly necessary but it's annoying to have uninitialized
list_head around.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
The debugfs file for dumping btcoex parameters unconditionally
assumes a MCI-based device. This will not work for older btcoex
chips. Fix this by branching out the routine into separate
functions.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The GIC interface numbering does not necessarily follow the logical
CPU numbering, especially for complex topologies such as multi-cluster
systems.
Fortunately we can easily probe the GIC to create a mapping as the
Interrupt Processor Targets Registers for the first 32 interrupts are
read-only, and each field returns a value that always corresponds to
the processor reading the register.
Initially all mappings target all CPUs in case an IPI is required to
boot secondary CPUs. It is refined as those CPUs discover what their
actual mapping is.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
In ARM SMP systems the MPIDR register ([23:0] bits) is used to uniquely
identify CPUs.
In order to retrieve the logical CPU index corresponding to a given
MPIDR value and guarantee a consistent translation throughout the kernel,
this patch adds a look-up based on the MPIDR[23:0] so that kernel subsystems
can use it whenever the logical cpu index corresponding to a given MPIDR
value is needed.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
As soon as the device tree is unflattened the cpu logical to physical
mapping is carried out in setup_arch to build a proper array of MPIDR and
corresponding logical indexes.
The mapping could have been carried out using the flattened DT blob and
related primitives, but since the mapping is not needed by early boot
code it can safely be executed when the device tree has been uncompressed to
its tree data structure.
This patch adds the arm_dt_init_cpu maps() function call in setup_arch().
If the kernel is not compiled with DT support the function is empty and
no logical mapping takes place through it; the mapping carried out in
smp_setup_processor_id() is left unchanged.
If DT is supported the mapping created in smp_setup_processor_id() is overriden.
The DT mapping also sets the possible cpus mask, hence platform
code need not set it again in the respective smp_init_cpus() functions.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
When booting through a device tree, the kernel cpu logical id map can be
initialized using device tree data passed by FW or through an embedded blob.
This patch adds a function that parses device tree "cpu" nodes and
retrieves the corresponding CPUs hardware identifiers (MPIDR).
It sets the possible cpus and the cpu logical map values according to
the number of CPUs defined in the device tree and respective properties.
The device tree HW identifiers are considered valid if all CPU nodes contain
a "reg" property, there are no duplicate "reg" entries and the DT defines a
CPU node whose "reg" property matches the MPIDR[23:0] of the boot CPU.
The primary CPU is assigned cpu logical number 0 to keep the current convention
valid.
Current bindings documentation is included in the patch:
Documentation/devicetree/bindings/arm/cpus.txt
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
This patch applies some basic changes to the smp_setup_processor_id()
ARM implementation to make the code that builds cpu_logical_map more
uniform across the kernel.
The function now prints the full extent of the boot CPU MPIDR[23:0] and
initializes the cpu_logical_map for CPUs up to nr_cpu_ids.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
This patch updates the topology initialization code to use the newly
defined accessors to retrieve the MPIDR affinity levels.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Kernel subsystems other than the topology layer need the MPIDR
mask definitions to access the MPIDR without relying on hardcoded
masks. This patch moves the MPIDR register masks definition to
a header file and defines a macro to simplify access to MPIDR bit fields
representing affinity levels.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
vtime_account() is only called from irq entry. irqs
are always disabled at this point so we can safely
remove the irq disabling guards on that function.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
On ia64 and powerpc, vtime context switch only consists
in flushing system and user pending time, plus a few
arch housekeeping.
Consolidate that into a generic implementation. s390 is
a special case because pending user and system time accounting
there is hard to dissociate. So it's keeping its own implementation.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
All vtime implementations just flush the user time on process
tick. Consolidate that in generic code by calling a user time
accounting helper. This avoids an indirect call in ia64 and
prepare to also consolidate vtime context switch code.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Prepending irq-unsafe vtime APIs with underscores was actually
a bad idea as the result is a big mess in the API namespace that
is even waiting to be further extended. Also these helpers
are always called from irq safe callers except kvm. Just
provide a vtime_account_system_irqsafe() for this specific
case so that we can remove the underscore prefix on other
vtime functions.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Commit "ath9k: improve suspend/resume reliability" broke ath9k_htc
and bringing up the device would hang indefinitely. Fix this.
Cc: stable@vger.kernel.org
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Drivers (e.g. wl12xx) might need to know the vif
to roc on (mainly in order to configure the
rx filters correctly).
Add the vif to the op params, and update the current
users (iwlwifi) to use the new api.
Signed-off-by: Eliad Peller <eliad@wizery.com>
[fix hwsim]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, reading /proc/cpuinfo provides userspace with CPU ID of
the CPU carrying out the read from the file. This is fine as long as all
CPUs in the system are the same. With the advent of big.LITTLE and
heterogenous ARM systems this approach provides user space with incorrect
bits of information since CPU ids in the system might differ from the one
provided by the CPU reading the file.
This patch updates the cpuinfo show function so that a read from
/proc/cpuinfo prints HW information for all online CPUs at once, mirroring
x86 behaviour.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
The advent of big.LITTLE ARM platforms requires the kernel to be able
to identify the MIDRs of all online CPUs upon request. MIDRs are stashed
at boot time so that kernel subsystems can detect the MIDR of online CPUs
by simply retrieving per-CPU data updated by all booted CPUs.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
The NL80211_CMD_TDLS_OPER command was previously used only for userspace
request for the kernel code to perform TDLS operations. However, there
are also cases where the driver may need to request operations from
userspace, e.g., when using security on the AP path. Add a new cfg80211
function for generating a TDLS operation event for drivers to request a
new link to be set up (NL80211_TDLS_SETUP) or an existing link to be
torn down (NL80211_TDLS_TEARDOWN). Drivers can optionally use these
events, e.g., based on noticing data traffic being sent to a peer
station that is seen with good signal strength.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In some cases, in particular for experimentation, it
can be useful to be able to add vendor namespace data
to received frames in addition to the normal radiotap
data.
Allow doing this through mac80211 by adding fields to
the RX status descriptor that describe the data while
the data itself is prepended to the frame.
Also add some example code to hwsim, but don't enable
it because it doesn't use a proper OUI identifier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce IEEE80211_NUM_TIDS in the generic 802.11
header file and use it in place of STA_TID_NUM and
NUM_RX_DATA_QUEUES which are both really the number
of TIDs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reflect architectural support for seccomp filter.
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On tracehook-friendly platforms, a system call number of -1 falls
through without running much code or taking much action.
ARM is different. This adds a short-circuit check in the trace path to
avoid any additional work, as suggested by Russell King, to make sure
that ARM behaves the same way as other platforms.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Drewry <wad@chromium.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There is very little difference in the TIF_SECCOMP and TIF_SYSCALL_WORK
path in entry-common.S, so merge TIF_SECCOMP into TIF_SYSCALL_WORK and
move seccomp into the syscall_trace_enter() handler.
Expanded some of the tracehook logic into the callers to make this code
more readable. Since tracehook needs to do register changing, this portion
is best left in its own function instead of copy/pasting into the callers.
Additionally, the return value for secure_computing() is now checked
and a -1 value will result in the system call being skipped.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Drewry <wad@chromium.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Provide an ARM implementation of syscall_get_arch. This is a pre-requisite
for CONFIG_HAVE_ARCH_SECCOMP_FILTER.
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This will allow to reduce slightly the number of interrupts
without sacrificing too much the latency in the Rx path.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is not used outside pcie/rx.c.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When software crypto is enabled, it isn't safe
to enable MFP since the firmware interprets some
management packets, and with MFP it would do so
without proper validation.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
One one just a wrapper of the second, squash them.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rename static functions. Function moved from trans.c to
tx.c. A few could be made static, others had to be exported.
Functions that implement the transport API are prefixed by
iwl_trans_pcie_, the others by iwl_pcie_.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Functions that implement the transport API are prefixed by
iwl_trans_pcie_, the others by iwl_pcie_.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rename static functions. Function moved from trans.c to
rx.c. A few could be made static, others had to be exported.
Also, don't use rxb or rxbuf, but rb which stands for receive
buffer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1) s/tx_queue/txq
for the sake of consistency.
2) s/rx_queue/rxq
for the sake of consistency.
3) Make all functions begin with iwl_pcie_
iwl_queue_init and iwl_queue_space are an exception
since they are not PCIE specific although they are in
pcie subdir.
4) s/trans_pcie_get_cmd_string/get_cmd_string
it is much shorter and used in debug prints which
are long lines.
5) s/iwl_bg_rx_replenish/iwl_pcie_rx_replenish_work
this better emphasizes that it is a work
6) remove invalid kernelDOC markers
pcie/tx.c and pcie/trans.c still needs to be cleaned up.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During testing our mac80211 driver a fatal error occurred which was
signalled to mac80211. Upon performing the reconfiguration of the
device a WARN_ON was triggered. This warning checked the return value
of drv_add_chanctx(). However, this returns -EOPNOTSUPP when the
driver does not provide the callback. As the callback is optional
better check it is defined before calling drv_add_chanctx().
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
"Asynchronous" is misspelled in some comments. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
