Currently, the firmware compatible features are enabled in PF driver
initialization process, but they are not disabled in PF driver
deinitialization process and firmware keeps these features in enabled
status.
In this case, if load an old PF driver (for example, in VM) which not
support the firmware compatible features, firmware will still send mailbox
message to PF when link status changed and PF will print
"un-supported mailbox message, code = 201".
To fix this problem, disable these firmware compatible features in PF
driver deinitialization process.
Fixes: ed8fb4b262 ("net: hns3: add link change event report")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the rx vlan filter will always be disabled before selftest and
be enabled after selftest as the rx vlan filter feature is fixed on in
old device earlier than V3.
However, this feature is not fixed in some new devices and it can be
disabled by user. In this case, it is wrong if rx vlan filter is enabled
after selftest. So fix it.
Fixes: bcc26e8dc4 ("net: hns3: remove unused code in hns3_self_test()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If unicast mac address table is full, and user add a new mac address, the
unicast promisc needs to be enabled for the new unicast mac address can be
used. So does the multicast promisc.
Now this feature has been implemented for PF, and VF should be implemented
too. When the mac table of VF is overflow, PF will enable promisc for this
VF.
Fixes: 1e6e76101f ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if function adds an existing unicast mac address, eventhough
driver will not add this address into hardware, but it will return 0 in
function hclge_add_uc_addr_common(). It will cause the state of this
unicast mac address is ACTIVE in driver, but it should be in TO-ADD state.
To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST
if mac address is existing, and delete two error log to avoid printing
them all the time after this modification.
Fixes: 72110b5674 ("net: hns3: return 0 and print warning when hit duplicate MAC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable
multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is
supposed to set when enable multiple TCs with ets. But
the driver mixed the flags when updating the tm configuration.
Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE
too, so remove the unnecessary limitation.
Fixes: 5a5c909174 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For destroy mqprio is irreversible in stack, so it's unnecessary
to rollback the tc configuration when destroy mqprio failed.
Otherwise, it may cause the configuration being inconsistent
between driver and netstack.
As the failure is usually caused by reset, and the driver will
restore the configuration after reset, so it can keep the
configuration being consistent between driver and hardware.
Fixes: 5a5c909174 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, in function hns3_nic_set_real_num_queue(), the
driver doesn't report the queue count and offset for disabled
tc. If user enables multiple TCs, but only maps user
priorities to partial of them, it may cause the queue range
of the unmapped TC being displayed abnormally.
Fix it by removing the tc enable checking, ensure the queue
count is not zero.
With this change, the tc_en is useless now, so remove it.
Fixes: a75a8efa00 ("net: hns3: Fix tc setup when netdev is first up")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ixgbe driver currently generates a NULL pointer dereference with
some machine (online cpus < 63). This is due to the fact that the
maximum value of num_xdp_queues is nr_cpu_ids. Code is in
"ixgbe_set_rss_queues"".
Here's how the problem repeats itself:
Some machine (online cpus < 63), And user set num_queues to 63 through
ethtool. Code is in the "ixgbe_set_channels",
adapter->ring_feature[RING_F_FDIR].limit = count;
It becomes 63.
When user use xdp, "ixgbe_set_rss_queues" will set queues num.
adapter->num_rx_queues = rss_i;
adapter->num_tx_queues = rss_i;
adapter->num_xdp_queues = ixgbe_xdp_queues(adapter);
And rss_i's value is from
f = &adapter->ring_feature[RING_F_FDIR];
rss_i = f->indices = f->limit;
So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup",
for (i = 0; i < adapter->num_rx_queues; i++)
if (adapter->xdp_ring[i]->xsk_umem)
It leads to panic.
Call trace:
[exception RIP: ixgbe_xdp+368]
RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297
RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90
RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000
R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000
R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc
8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808
9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235
10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384
11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd
12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb
13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88
14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319
15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290
16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8
17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64
18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9
19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c
So I fix ixgbe_max_channels so that it will not allow a setting of queues
to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup,
take the smaller value of num_rx_queues and num_xdp_queues.
Fixes: 4a9b32f30f ("ixgbe: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both cxgb4 and csiostor drivers run on their own independent Physical
Function. But when cxgb4 and csiostor are both being loaded in parallel via
modprobe, there is a race when firmware upgrade is attempted by both the
drivers.
When the cxgb4 driver initiates the firmware upgrade, it halts the firmware
and the chip until upgrade is complete. When the csiostor driver is coming
up in parallel, the firmware mailbox communication fails with timeouts and
the csiostor driver probe fails.
Add a module soft dependency on cxgb4 driver to ensure loading csiostor
triggers cxgb4 to load first when available to avoid the firmware upgrade
race.
Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com
Fixes: a3667aaed5 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Disable default logging of some I/O path messages. If desired, the messages
can be turned back on by setting ql2xextended_error_logging.
Link: https://lore.kernel.org/r/20210925035154.29815-1-njavali@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared
with zero: result > 0.
Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace().
Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com
Fixes: 4b42d557a8 ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs")
Cc: stable@vger.kernel.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jonathan Hsu <jonathan.hsu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ksmbd_kthread_fn() and create_socket() returns 0 or error code, and not
task_struct/ERR_PTR.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The sequence count bridge_mcast_querier::seq is protected by
net_bridge::multicast_lock but seqcount_init() does not associate the
seqcount with the lock. This leads to a warning on PREEMPT_RT because
preemption is still enabled.
Let seqcount_init() associate the seqcount with lock that protects the
write section. Remove lockdep_assert_held_once() because lockdep already checks
whether the associated lock is held.
Fixes: 67b746f94f ("net: bridge: mcast: make sure querier port/address updates are consistent")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210928141049.593833-1-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The second resource is optional which is only provided on the chipset
IPQ5018. But the blamed commit ignores that and if the resource is
not there it just fails.
the resource is used like this,
if (priv->eth_ldo_rdy) {
val = readl(priv->eth_ldo_rdy);
val |= BIT(0);
writel(val, priv->eth_ldo_rdy);
fsleep(IPQ_PHY_SET_DELAY_US);
}
This patch reverts that to still allow the second resource to be optional
because other SoC have the some MDIO controller and doesn't need to
second resource.
Fixes: fa14d03e01 ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()")
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix wakeup interrupts in the AMD driver affecting AMD laptops.
- Fix parent irqspec translation in the Qualcomm SPMI GPIO driver.
- Fix deferred probe handling in the Rockchip driver, this is a
stopgap solution while we look for something more elegant.
- Add PM suspend callbacks to the Qualcomm SC7280 driver.
- Some minor doc fix (should have come in earlier, sorry)
-----BEGIN PGP SIGNATURE-----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=Gel/
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some few pin control fixes for the v5.15 kernel cycle. The most
critical is the AMD fixes.
- Fix wakeup interrupts in the AMD driver affecting AMD laptops.
- Fix parent irqspec translation in the Qualcomm SPMI GPIO driver.
- Fix deferred probe handling in the Rockchip driver, this is a
stopgap solution while we look for something more elegant.
- Add PM suspend callbacks to the Qualcomm SC7280 driver.
- Some minor doc fix (should have come in earlier, sorry)"
* tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: sc7280: Add PM suspend callbacks
gpio/rockchip: fetch deferred output settings on probe
pinctrl/rockchip: add a queue for deferred pin output settings on probe
pinctrl: qcom: spmi-gpio: correct parent irqspec translation
pinctrl: amd: Handle wake-up interrupt
pinctrl: amd: Add irq field data
pinctrl: core: Remove duplicated word from devm_pinctrl_unregister()
- Signal handling fixes,
- Removal of set_fs().
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYVMfohUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XDGEQD+I09Hy3vbXXsy8L56abgEF0YXh21q
SU0JvyprQg+Iq8cBALamKhorwKU3J1vcdB8qEvfgiv8niZVbrZOtY1oq6XsK
=PebJ
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull more m68k updates from Geert Uytterhoeven:
- signal handling fixes
- removal of set_fs()
[ The set_fs removal isn't strictly a fix, but it's been pending for a
while and is very welcome. The signal handling fixes resolved an issue
that was incorrectly attributed to the set_fs changes - Linus ]
* tag 'm68k-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Remove set_fs()
m68k: Provide __{get,put}_kernel_nofault
m68k: Factor the 8-byte lowlevel {get,put}_user code into helpers
m68k: Use BUILD_BUG for passing invalid sizes to get_user/put_user
m68k: Remove the 030 case in virt_to_phys_slow
m68k: Document that access_ok is broken for !CONFIG_CPU_HAS_ADDRESS_SPACES
m68k: Leave stack mangling to asm wrapper of sigreturn()
m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal
m68k: Handle arrivals of multiple signals correctly
In the s2idle stress test sdma resume fail occasionally,in the
failed case GPU is in the gfxoff state.This issue may introduce
by firmware miss handle doorbell S/R and now temporary fix the issue
by forcing exit gfxoff for sdma resume.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
On GFX9+, format modifiers are always enabled and ensure the
frame-buffers can be scanned out at ADDFB2 time.
On GFX8-, format modifiers are not supported and no other check
is performed. This means ADDFB2 IOCTLs will succeed even if the
tiling isn't supported for scan-out, and will result in garbage
displayed on screen [1].
Fix this by adding a check for tiling flags for GFX8 and older.
The check is taken from radeonsi in Mesa (see how is_displayable
is populated in gfx6_compute_surface).
Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel)
[1]: https://github.com/swaywm/wlroots/issues/3185
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
pci deviceid not passed to dal dc, without proper break,
dcn2.x falls into dcn3.x code path
[how]
pass in pci deviceid, and break once dal_version initialized.
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Stack variable params.backlight_ramping_override is uninitialized, so it
contains junk data
[How]
Initialize the variable to false
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
didn't read the value of mmCP_HQD_QUANTUM from correct
register offset
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
ASSR is dependent on Signed PSP Verstage to enable Content
Protection for eDP panels. Unsigned PSP verstage is used
during development phase causing ASSR to FAIL.
As a result, link training is performed with
DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for
eDP panels that causes display flicker on some panels.
[How]
- Do not change panel mode, if ASSR is disabled
- Just report and continue to perform eDP link training
with right settings further.
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
gmc_v{9,10}_0_gart_disable() isn't called matched with
correspoding gart_enbale function in SRIOV case. This will
lead to gart.bo pin_count leak on driver unload.
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A KMSAN warning is reported by Alexander Potapenko:
BUG: KMSAN: uninit-value in kernfs_dop_revalidate+0x61f/0x840
fs/kernfs/dir.c:1053
kernfs_dop_revalidate+0x61f/0x840 fs/kernfs/dir.c:1053
d_revalidate fs/namei.c:854
lookup_dcache fs/namei.c:1522
__lookup_hash+0x3a6/0x590 fs/namei.c:1543
filename_create+0x312/0x7c0 fs/namei.c:3657
do_mkdirat+0x103/0x930 fs/namei.c:3900
__do_sys_mkdir fs/namei.c:3931
__se_sys_mkdir fs/namei.c:3929
__x64_sys_mkdir+0xda/0x120 fs/namei.c:3929
do_syscall_x64 arch/x86/entry/common.c:51
It seems a positive dentry in kernfs becomes a negative dentry directly
through d_delete() in vfs_rmdir(). dentry->d_time is uninitialized
when accessing it in kernfs_dop_revalidate(), because it is only
initialized when created as negative dentry in kernfs_iop_lookup().
The problem can be reproduced by the following command:
cd /sys/fs/cgroup/pids && mkdir hi && stat hi && rmdir hi && stat hi
A simple fixes seems to be initializing d->d_time for positive dentry
in kernfs_iop_lookup() as well. The downside is the negative dentry
will be revalidated again after it becomes negative in d_delete(),
because the revison of its parent must have been increased due to
its removal.
Alternative solution is implement .d_iput for kernfs, and assign d_time
for the newly-generated negative dentry in it. But we may need to
take kernfs_rwsem to protect again the concurrent kernfs_link_sibling()
on the parent directory, it is a little over-killing. Now the simple
fix is chosen.
Link: https://marc.info/?l=linux-fsdevel&m=163249838610499
Fixes: c7e7c04274 ("kernfs: use VFS negative dentry caching")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20210928140750.1274441-1-houtao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to clobber a register that is only being read from.
Oops. Drop the XMM register from the clobbers list.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210927223621.50178-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix an integer overflow when computing the Merkle tree layout of
extremely large files, exposed by btrfs adding support for fs-verity.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYVKxQBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK0q7AQCRVYl9e6gOPduntU6zNfYxYiJAmGRQ
9jekhtPwFnuhLgEAnFxW3B51bG5c+Yv3xBBbDRpflk+39gd39eUOqRtlPQ4=
=tPA9
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity fix from Eric Biggers:
"Fix an integer overflow when computing the Merkle tree layout of
extremely large files, exposed by btrfs adding support for fs-verity"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: fix signed integer overflow with i_size near S64_MAX
Fixes up some issues in rc1.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmFSRZgPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpSnYIAMNstllnJgyDR0GUGO850AKv0x2acncf66wc
J5vjWFWh5rtmdZSMhvA5mo3J8h/7s6Mn67fCwKt0Ii6fi1f6eIl4OBDYBfV8wXkN
+e8eQAUboi3HLqsiuFSNpJTHnD70xbU4inxiTjaBndXaxk20nkWJsd1Mvfmxh+mE
uMRnumAwrdL3c0n0Vrcq8j+zxLhlDXSFjICd6l+xRwPigsX/5gY+V5tPQg4lhnk+
VuC2Q0eJHmCEjrVi4Tx7dkoDu9U4Go5CnVF0MF9AzVf7JYBPJPks3r17unMe+ZAI
Nvwa/39no2APa9wZPQnGk5V9rOPtYFa6XXsCufN4BbtlqVX5AlQ=
=2oo6
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vdpa fixes from Michael Tsirkin:
"Fixes up some issues in rc1"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: potential uninitialized return in vhost_vdpa_va_map()
vdpa/mlx5: Avoid executing set_vq_ready() if device is reset
vdpa/mlx5: Clear ready indication for control VQ
vduse: Cleanup the old kernel states after reset failure
vduse: missing error code in vduse_init()
virtio: don't fail on !of_device_is_compatible
- renesas_sdhi: Fix regression with hard reset on old SDHIs
- dw_mmc: Only inject fault before done/error
-----BEGIN PGP SIGNATURE-----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=WC87
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- renesas_sdhi: Fix regression with hard reset on old SDHIs
- dw_mmc: Only inject fault before done/error
* tag 'mmc-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: renesas_sdhi: fix regression with hard reset on old SDHIs
mmc: dw_mmc: Only inject fault before done/error
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-28
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).
The main changes are:
1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.
2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.
3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.
4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.
5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.
6) Fix return value handling for struct_ops BPF programs, from Hou Tao.
7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,
This reverts commit 2d52c58b9c.
We have had several folks complain that this causes hangs for them, which
is especially problematic as the commit has also hit stable already.
As no resolution seems to be forthcoming right now, revert the patch.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214503
Fixes: 2d52c58b9c ("block, bfq: honor already-setup queue merges")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function copies strings around between multiple buffers
including a large on-stack array that causes a build warning
on 32-bit systems:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg':
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]
The function can probably be cleaned up a lot, to go back to
printing directly into the output buffer, but dynamically allocating
the structure is a simpler workaround for now.
Fixes: 04d96139dd ("net: hns3: refine function hclge_dbg_dump_tm_pri()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the documentation the second resource is optional. But the
blamed commit ignores that and if the resource is not there it just
fails.
This patch reverts that to still allow the second resource to be
optional because other SoC have the some MDIO controller and doesn't
need to second resource.
Fixes: 672a1c3949 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
unix_create1() returns NULL on error, and the callers assume that it never
fails for reasons other than out of memory. So, the callers always return
-ENOMEM when unix_create1() fails.
However, it also returns NULL when the number of af_unix sockets exceeds
twice the limit controlled by sysctl: fs.file-max. In this case, the
callers should return -ENFILE like alloc_empty_file().
This patch changes unix_create1() to return the correct error value instead
of NULL on error.
Out of curiosity, the assumption has been wrong since 1999 due to this
change introduced in 2.2.4 [0].
diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c
--- v2.2.3/linux/net/unix/af_unix.c Tue Jan 19 11:32:53 1999
+++ linux/net/unix/af_unix.c Sun Mar 21 07:22:00 1999
@@ -388,6 +413,9 @@
{
struct sock *sk;
+ if (atomic_read(&unix_nr_socks) >= 2*max_files)
+ return NULL;
+
MOD_INC_USE_COUNT;
sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1);
if (!sk) {
[0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_INET is not set, there are failing references to IPv4
functions, so make this driver depend on INET.
Fixes these build errors:
sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common':
sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send'
sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common':
sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aaron Young <aaron.young@oracle.com>
Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't print stats for which we haven't reserved space as it can
cause nasty memory bashing and related bad behaviors.
Fixes: aa620993b1 ("ionic: pull per-q stats work out of queue loops")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
nguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-09-27
This series contains updates to e100 driver only.
Jake corrects under allocation of register buffer due to incorrect
calculations and fixes buffer overrun of register dump.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Many architectures don't define virt_to_bus() any more, as drivers
should be using the dma-mapping interfaces where possible:
In file included from drivers/net/hamradio/dmascc.c:27:
drivers/net/hamradio/dmascc.c: In function 'tx_on':
drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration]
976 | virt_to_bus(priv->tx_buf[priv->tx_tail]) + n);
| ^~~~~~~~~~~
arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr'
109 | __set_dma_addr(chan, (void *)__bus_to_virt(addr))
| ^~~~
Add the Kconfig dependency to prevent this from being built on
architectures without virt_to_bus().
Fixes: bc1abb9e55 ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
An object file cannot be built for both loadable module and built-in
use at the same time:
arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common':
ks8851_common.c:(.text+0xf80): undefined reference to `__this_module'
Change the ks8851_common code to be a standalone module instead,
and use Makefile logic to ensure this is built-in if at least one
of its two users is.
Fixes: 797047f875 ("net: ks8851: Implement Parallel bus operations")
Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the case where the dst register maps to %rax as otherwise this produces
an incorrect mapping with the implementation in 981f94c3e9 ("bpf: Add
bitwise atomic instructions") as %rax is clobbered given it's part of the
cmpxchg as operand.
The issue is similar to b29dd96b90 ("bpf, x86: Fix BPF_FETCH atomic and/or/
xor with r0 as src") just that the case of dst register was missed.
Before, dst=r0 (%rax) src=r2 (%rsi):
[...]
c5: mov %rax,%r10
c8: mov 0x0(%rax),%rax <---+ (broken)
cc: mov %rax,%r11 |
cf: and %rsi,%r11 |
d2: lock cmpxchg %r11,0x0(%rax) <---+
d8: jne 0x00000000000000c8 |
da: mov %rax,%rsi |
dd: mov %r10,%rax |
[...] |
|
After, dst=r0 (%rax) src=r2 (%rsi): |
|
[...] |
da: mov %rax,%r10 |
dd: mov 0x0(%r10),%rax <---+ (fixed)
e1: mov %rax,%r11 |
e4: and %rsi,%r11 |
e7: lock cmpxchg %r11,0x0(%r10) <---+
ed: jne 0x00000000000000dd
ef: mov %rax,%rsi
f2: mov %r10,%rax
[...]
The remaining combinations were fine as-is though:
After, dst=r9 (%r15) src=r0 (%rax):
[...]
dc: mov %rax,%r10
df: mov 0x0(%r15),%rax
e3: mov %rax,%r11
e6: and %r10,%r11
e9: lock cmpxchg %r11,0x0(%r15)
ef: jne 0x00000000000000df _
f1: mov %rax,%r10 | (unneeded, but
f4: mov %r10,%rax _| not a problem)
[...]
After, dst=r9 (%r15) src=r4 (%rcx):
[...]
de: mov %rax,%r10
e1: mov 0x0(%r15),%rax
e5: mov %rax,%r11
e8: and %rcx,%r11
eb: lock cmpxchg %r11,0x0(%r15)
f1: jne 0x00000000000000e1
f3: mov %rax,%rcx
f6: mov %r10,%rax
[...]
The case of dst == src register is rejected by the verifier and
therefore not supported, but x86 JIT also handles this case just
fine.
After, dst=r0 (%rax) src=r0 (%rax):
[...]
eb: mov %rax,%r10
ee: mov 0x0(%r10),%rax
f2: mov %rax,%r11
f5: and %r10,%r11
f8: lock cmpxchg %r11,0x0(%r10)
fe: jne 0x00000000000000ee
100: mov %rax,%r10
103: mov %r10,%rax
[...]
Fixes: 981f94c3e9 ("bpf: Add bitwise atomic instructions")
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
sid2groups keeps track of which stream id combinations belong to a
iommu_group to assign those correctly to devices.
When a iommu_group is freed a stale pointer will however remain in
sid2groups. This prevents devices with the same stream id combination
to ever be attached again (see below).
Fix that by creating a shadow copy of the stream id configuration
when a group is allocated for the first time and clear the sid2group
entry when that group is freed.
# echo 1 >/sys/bus/pci/devices/0000\:03\:00.0/remove
pci 0000:03:00.0: Removing from iommu group 1
# echo 1 >/sys/bus/pci/rescan
[...]
pci 0000:03:00.0: BAR 0: assigned [mem 0x6a0000000-0x6a000ffff 64bit pref]
pci 0000:03:00.0: BAR 2: assigned [mem 0x6a0010000-0x6a001ffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0x6c0100000-0x6c01007ff pref]
tg3 0000:03:00.0: Failed to add to iommu group 1: -2
[...]
Fixes: 46d1fb072e ("iommu/dart: Add DART iommu driver")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210924134502.15589-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
719a193356 ("iommu/vt-d: Tweak the description of a DMA fault") changed
the DMA fault reason from hex to decimal. It also added "0x" prefixes to
the PCI bus/device, e.g.,
- DMAR: [INTR-REMAP] Request device [00:00.5]
+ DMAR: [INTR-REMAP] Request device [0x00:0x00.5]
These no longer match dev_printk() and other similar messages in
dmar_match_pci_path() and dmar_acpi_insert_dev_scope().
Drop the "0x" prefixes from the bus and device addresses.
Fixes: 719a193356 ("iommu/vt-d: Tweak the description of a DMA fault")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210903193711.483999-1-helgaas@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210922054726.499110-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
apple_dart_tlb_flush_{all,walk} expect to get a struct apple_dart_domain
but instead get a struct iommu_domain right now. This breaks those two
functions and can lead to kernel panics like the one below.
DART can only invalidate the entire TLB and apple_dart_iotlb_sync will
already flush everything. There's no need to do that again inside those
two functions. Let's just drop them.
pci 0000:03:00.0: Removing from iommu group 1
Unable to handle kernel paging request at virtual address 0000000100000023
[...]
Call trace:
_raw_spin_lock_irqsave+0x54/0xbc
apple_dart_hw_stream_command.constprop.0+0x2c/0x130
apple_dart_tlb_flush_all+0x48/0x90
free_io_pgtable_ops+0x40/0x70
apple_dart_domain_free+0x2c/0x44
iommu_group_release+0x68/0xac
kobject_cleanup+0x4c/0x1fc
kobject_cleanup+0x14c/0x1fc
kobject_put+0x64/0x84
iommu_group_remove_device+0x110/0x180
iommu_release_device+0x50/0xa0
[...]
Fixes: 46d1fb072e ("iommu/dart: Add DART iommu driver")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210921153934.35647-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The hrtimer callback pcsp_do_timer() prepares rearming of the timer with
hrtimer_forward(). hrtimer_forward() is intended to provide a mechanism to
forward the expiry time of the hrtimer by a multiple of the period argument
so that the expiry time greater than the time provided in the 'now'
argument.
pcsp_do_timer() invokes hrtimer_forward() with the current timer expiry
time as 'now' argument. That's providing a periodic timer expiry, but is
not really robust when the timer callback is delayed so that the resulting
new expiry time is already in the past which causes the callback to be
invoked immediately again. If the timer is delayed then the back to back
invocation is not really making it better than skipping the missed
periods. Sound is distorted in any case.
Use hrtimer_forward_now() which ensures that the next expiry is in the
future. This prevents hogging the CPU in the timer expiry code and allows
later on to remove hrtimer_forward() from the public interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210923153339.623208460@linutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
