Commit Graph

3987 Commits

Author SHA1 Message Date
Shilpasri G Bhat
bf9571550f powerpc/powernv: Add support to clear sensor groups data
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:40:05 +10:00
Shilpasri G Bhat
8e84b2d1f0 powerpc/powernv: Add support to set power-shifting-ratio
This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:40:01 +10:00
Shilpasri G Bhat
cb8b340de2 powerpc/powernv: Add support for powercap framework
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:39:53 +10:00
Nicholas Piggin
04019bf8eb powerpc: Add irq accounting for watchdog interrupts
This adds an irq counter for the watchdog soft-NMI. This interrupt
only fires when interrupts are soft-disabled, so it will not
increment much even when the watchdog is running. However it's
useful for debugging and sanity checking.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:30:02 +10:00
Nicholas Piggin
ca41ad4377 powerpc: Add irq accounting for system reset interrupts
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:30:01 +10:00
Andreas Schwab
8a583c0a8d powerpc: Fix invalid use of register expressions
binutils >= 2.26 now warns about misuse of register expressions in
assembler operands that are actually literals, for example:

  arch/powerpc/kernel/entry_64.S:535: Warning: invalid register expression

In practice these are almost all uses of r0 that should just be a
literal 0.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
[mpe: Mention r0 is almost always the culprit, fold in purgatory change]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:29:41 +10:00
Michael Ellerman
21a0e8c14b powerpc/mm/hash64: Make vmalloc 56T on hash
On 64-bit book3s, with the hash MMU, we currently define the kernel
virtual space (vmalloc, ioremap etc.), to be 16T in size. This is a
leftover from pre v3.7 when our user VM was also 16T.

Of that 16T we split it 50/50, with half used for PCI IO and ioremap
and the other 8T for vmalloc.

We never bothered to make it any bigger because 8T of vmalloc ought to
be enough for anybody. But it turns out that's not true, the per cpu
allocator wants large amounts of vmalloc space, not to make large
allocations, but to allow a large stride between allocations, because
we use pcpu_embed_first_chunk().

With a bit of juggling we can increase the entire kernel virtual space
to 64T. The only real complication is the check of the address in the
SLB miss handler, see the comment in the code.

Although we could continue to split virtual space 50/50 as we do now,
no one seems to be running out of PCI IO or ioremap space. So instead
keep that as 8T, and use the remaining 56T for vmalloc.

In future we should be able to increase the kernel virtual space to
512T, the code already supports that, it just needs testing on older
hardware.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2017-08-08 19:37:05 +10:00
Michael Ellerman
63ee9b2ff9 powerpc/mm/book3s64: Make KERN_IO_START a variable
Currently KERN_IO_START is defined as:

 #define KERN_IO_START  (KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))

Although it looks like a constant, both the components are actually
variables, to allow us to have a different value between Radix and
Hash with a single kernel.

However that still requires both Radix and Hash to place the kernel IO
region at the same location relative to the start and end of the
kernel virtual region (namely 1/2 way through it), and we'd like to
change that.

So split KERN_IO_START out into its own variable, and initialise it
for Radix and Hash. In the medium term we should be able to
reconsolidate this, by doing a more involved rearrangement of the
location of the regions.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-08 19:37:04 +10:00
Matt Brown
e66ca3db59 powerpc/powernv: Use darn instruction for get_random_seed() on Power9
This adds powernv_get_random_darn() which utilises the darn instruction,
introduced in ISA v3.0/POWER9.

The darn instruction can potentially return an error, which is supported
by the get_random_seed() API, in normal usage if we see an error we just
return that to the caller.

However when detecting whether darn is functional at boot we try up to
10 times, before deciding that darn doesn't work and failing the
registration of get_random_seed(). That way an intermittent failure
at boot doesn't deprive the system of randomness until the next reboot.

Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
[mpe: Move init into a function, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-08 19:37:03 +10:00
Frederic Barrat
2552910084 powerpc/powernv: Enable PCI peer-to-peer
P9 has support for PCI peer-to-peer, enabling a device to write in the
MMIO space of another device directly, without interrupting the CPU.

This patch adds support for it on powernv, by adding a new API to be
called by drivers. The pnv_pci_set_p2p(...) call configures an
'initiator', i.e the device which will issue the MMIO operation, and a
'target', i.e. the device on the receiving side.

P9 really only supports MMIO stores for the time being but that's
expected to change in the future, so the API allows to define both
load and store operations.

  /* PCI p2p descriptor */
  #define OPAL_PCI_P2P_ENABLE           0x1
  #define OPAL_PCI_P2P_LOAD             0x2
  #define OPAL_PCI_P2P_STORE            0x4

  int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target,
                      u64 desc)

It uses a new OPAL call, as the configuration magic is done on the
PHBs by skiboot.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
[mpe: Drop unrelated OPAL calls, s/uint64_t/u64/, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-08 11:27:30 +10:00
Benjamin Herrenschmidt
6ff4d3e966 powerpc: Remove old unused icswx based coprocessor support
We have a whole pile of unused code to maintain the ACOP register,
allocate coprocessor PIDs and handle ACOP faults. This mechanism
was used for the HFI adapter on POWER7 which is dead and gone and
whose driver never went upstream. It was used on some A2 core based
stuff that also never saw the light of day.

Take out all that code.

There is still some POWER8 coprocessor code that uses icswx but it's
kernel only and thus doesn't use any of that infrastructure.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:52 +10:00
Benjamin Herrenschmidt
870cfe77a9 powerpc/mm: Update definitions of DSISR bits
This updates the definitions for the various DSISR bits to
match both some historical stuff and to match new bits on
POWER9.

In addition, we define some masks corresponding to the "bad"
faults on Book3S, and some masks corresponding to the bits
that match between DSISR and SRR1 for a DSI and an ISI.

This comes with a small code update to change the definition
of DSISR_PGDIRFAULT which becomes DSISR_PRTABLE_FAULT to
match architecture 3.0B

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:43 +10:00
Benjamin Herrenschmidt
424de9c6e3 powerpc/mm/radix: Avoid flushing the PWC on every flush_tlb_range
We do that because it's used by THP pmd collapsing, so use
instead a dedicated flush function.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-02 13:11:06 +10:00
Benjamin Herrenschmidt
a46cc7a90f powerpc/mm/radix: Improve TLB/PWC flushes
At the moment we have to rather sub-optimal flushing behaviours:

 - flush_tlb_mm() will flush the PWC which is unnecessary (for example
   when doing a fork)

 - A large unmap will call flush_tlb_pwc() multiple times causing us
   to perform that fairly expensive operation repeatedly. This happens
   often in batches of 3 on every new process.

So we change flush_tlb_mm() to only flush the TLB, and we use the
existing "need_flush_all" flag in struct mmu_gather to indicate
that the PWC needs flushing.

Unfortunately, flush_tlb_range() still needs to do a full flush
for now as it's used by the THP collapsing. We will fix that later.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-02 13:11:06 +10:00
Gautham R. Shenoy
e1c1cfed54 powerpc/powernv: Save/Restore additional SPRs for stop4 cpuidle
The stop4 idle state on POWER9 is a deep idle state which loses
hypervisor resources, but whose latency is low enough that it can be
exposed via cpuidle.

Until now, the deep idle states which lose hypervisor resources (eg:
winkle) were only exposed via CPU-Hotplug.  Hence currently on wakeup
from such states, barring a few SPRs which need to be restored to
their older value, rest of the SPRS are reinitialized to their values
corresponding to that at boot time.

When stop4 is used in the context of cpuidle, we want these additional
SPRs to be restored to their older value, to ensure that the context
on the CPU coming back from idle is same as it was before going idle.

In this patch, we define a SPR save area in PACA (since we have used
up the volatile register space in the stack) and on POWER9, we restore
SPRN_PID, SPRN_LDBAR, SPRN_FSCR, SPRN_HFSCR, SPRN_MMCRA, SPRN_MMCR1,
SPRN_MMCR2 to the values they had before entering stop.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-01 21:01:20 +10:00
Madhavan Srinivasan
8f95faaac5 powerpc/powernv: Detect and create IMC device
Code to create platform device for the In-Memory Collection (IMC)
counters. Platform devices are created based on the IMC compatibility.
New header file created to contain the data structures and macros
needed for In-Memory Collection (IMC) counter pmu devices.

The device tree for IMC counters starts at the node "imc-counters".
This node contains all the IMC PMU nodes and event nodes for these IMC
PMUs. Device probe() parses the device to locate three possible IMC
device types (Nest/Core/Thread). Function then branch to parse each
unit nodes to populate vital information such as device memory sizes,
event nodes information, base address for reserve memory access (if
any) and so on. Simple bare-minimum shutdown function added which only
"stops" the engines.

Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Fix build with CONFIG_PERF_EVENTS=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-25 22:55:27 +10:00
Madhavan Srinivasan
28a5db0061 powerpc/powernv: Add IMC OPAL APIs
In-Memory Collection (IMC) counters are performance monitoring
infrastructure. These counters need special sequence of SCOMs to
init/start/stop which is handled by OPAL. And OPAL provides three APIs
to init and control these IMC engines.

OPAL API documentation:
  https://github.com/open-power/skiboot/blob/master/doc/opal-api/opal-imc-counters.rst

Patch updates the kernel side powernv platform code to support the new
OPAL APIs

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-24 23:00:22 +10:00
Laurentiu Tudor
8f36479d0e powerpc: allow compiling with GENERIC_MSI_IRQ_DOMAIN
This allows building powerpc with the GENERIC_MSI_IRQ_DOMAIN
Kconfig by enabling the asm-generic msi.h in Kbuild. Without
this, there's a compilation error [1] because powerpc, as most
arches, doesn't provide an asm/msi.h.

[1] In file included from ./include/linux/kvm_host.h:20:0,
                 from ./arch/powerpc/include/asm/kvm_ppc.h:30,
                 from arch/powerpc/kernel/dbell.c:20:
./include/linux/msi.h:195:21: fatal error: asm/msi.h: No such file or directory

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-24 21:19:32 +10:00
Linus Torvalds
ae75d1aefe TTY/Serial fixes for 4.13-rc2
Here are some small tty and serial driver fixes for 4.13-rc2.  Nothing
 huge at all, a revert of a patch that turned out to break things, a fix
 up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition
 correct, and a few minor serial driver fixes for reported issues.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWXMebA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn9MgCdGsIEQlTvTeG4QikxUPB7dkEJQacAoLWOKJzQ
 A65mBAeOfiJztczi8uo4
 =KEXp
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
  huge at all, a revert of a patch that turned out to break things, a
  fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi
  definition correct, and a few minor serial driver fixes for reported
  issues.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix TIOCGPTPEER ioctl definition
  tty: hide unused pty_get_peer function
  tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART
  serial: imx: Prevent TX buffer PIO write when a DMA has been started
  Revert "serial: imx-serial - move DMA buffer configuration to DT"
  serial: sh-sci: Uninitialized variables in sysfs files
  serial: st-asc: Potential error pointer dereference
2017-07-22 09:00:24 -07:00
Linus Torvalds
10fc95547f powerpc fixes for 4.13 #3
A handful of fixes, mostly for new code.
 
 Some reworking of the new STRICT_KERNEL_RWX support to make sure we also remove
 executable permission from __init memory before it's freed.
 
 A fix to some recent optimisations to the hypercall entry where we were
 clobbering r12, this was breaking nested guests (PR KVM).
 
 A fix for the recent patch to opal_configure_cores(). This could break booting
 on bare metal Power8 boxes if the kernel was built without
 CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG.
 
 And finally a workaround for spurious PMU interrupts on Power9 DD2.
 
 Thanks to:
   Nicholas Piggin, Anton Blanchard, Balbir Singh.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZcctRAAoJEFHr6jzI4aWAji8P/RaG3/vGmhP4HGsAh7jHx/3v
 EIBsjXPozQ16AIs4235JcQ2Vg54LLms6IaFfw1w9oYZxi98sNC3b56Rtd3AGxLbq
 WHEGAD+mE9aXUOXkycLRkKZ+THiNzR0ZQKiMDqU+oJ9XbIAoof2gI4nc7UzUxGnt
 EqxERiL2RrYqRBvO3W2ErtL29yXhopUhv+HKdbuMlIcoH4uooSdn435MPleIJWxl
 WRFFv17DFw7PN6juwlff2YWvbTgrM1ND8czLfINzSZQDy0F+HEbKDFbtHlgAvOFN
 GjbODX9OuU/QRrPQv6MoY2UumZNtLSCUsw5BUg0y4Qaak8p0gAEb4D/gmvIZNp/r
 9ZqJDPfFKh/oA08apLTPJBKQmDUwCaYHyHVJNw10CU9GZ9CzW/2/B2/h2Egpgqao
 vt0TgR3FXYizhXGAEpmBZzadAg9VKZTXH/irN6X62wMxNfvRIDOS57829QFHr0ka
 wbsOK1gI1rE1g1GwsZafyURRSe95Sv84RDHW1fFQAtvFgpA3eHl26LUkpcvwOOFI
 53g9zMedYOyZXXIdBn05QojwxgXZ0ry1Wc93oDHOn3rgDL6XBeOXFfFI5jIwPJDL
 VZhOSvN1v+Ti3Q+I05zH+ll6BMhlU8RKBf+esq419DiLUeaNLHZR6GF0+UVJyJo+
 WcLsJ1x/GDa9pOBfMEJy
 =Oy4/
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "A handful of fixes, mostly for new code:

   - some reworking of the new STRICT_KERNEL_RWX support to make sure we
     also remove executable permission from __init memory before it's
     freed.

   - a fix to some recent optimisations to the hypercall entry where we
     were clobbering r12, this was breaking nested guests (PR KVM).

   - a fix for the recent patch to opal_configure_cores(). This could
     break booting on bare metal Power8 boxes if the kernel was built
     without CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG.

   - .. and finally a workaround for spurious PMU interrupts on Power9
     DD2.

  Thanks to: Nicholas Piggin, Anton Blanchard, Balbir Singh"

* tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y
  powerpc/mm/hash: Refactor hash__mark_rodata_ro()
  powerpc/mm/radix: Refactor radix__mark_rodata_ro()
  powerpc/64s: Fix hypercall entry clobbering r12 input
  powerpc/perf: Avoid spurious PMU interrupts after idle
  powerpc/powernv: Fix boot on Power8 bare metal due to opal_configure_cores()
2017-07-21 13:54:37 -07:00
Linus Torvalds
0a6109fd1b Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
 "A fix to WARN_ON_ONCE() done by modules, plus a MAINTAINERS update"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debug: Fix WARN_ON_ONCE() for modules
  MAINTAINERS: Update the PTRACE entry
2017-07-21 10:41:19 -07:00
Josh Poimboeuf
325cdacd03 debug: Fix WARN_ON_ONCE() for modules
Mike Galbraith reported a situation where a WARN_ON_ONCE() call in DRM
code turned into an oops.  As it turns out, WARN_ON_ONCE() seems to be
completely broken when called from a module.

The bug was introduced with the following commit:

  19d436268d ("debug: Add _ONCE() logic to report_bug()")

That commit changed WARN_ON_ONCE() to move its 'once' logic into the bug
trap handler.  It requires a writable bug table so that the BUGFLAG_DONE
bit can be written to the flags to indicate the first warning has
occurred.

The bug table was made writable for vmlinux, which relies on
vmlinux.lds.S and vmlinux.lds.h for laying out the sections.  However,
it wasn't made writable for modules, which rely on the ELF section
header flags.

Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 19d436268d ("debug: Add _ONCE() logic to report_bug()")
Link: http://lkml.kernel.org/r/a53b04235a65478dd9afc51f5b329fdc65c84364.1500095401.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-20 12:31:04 +02:00
Michael Ellerman
029d9252b1 powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y
Currently even with STRICT_KERNEL_RWX we leave the __init text marked
executable after init, which is bad.

Add a hook to mark it NX (no-execute) before we free it, and implement
it for radix and hash.

Note that we use __init_end as the end address, not _einittext,
because overlaps_kernel_text() uses __init_end, because there are
additional executable sections other than .init.text between
__init_begin and __init_end.

Tested on radix and hash with:

  0:mon> p $__init_begin
  *** 400 exception occurred

Fixes: 1e0fc9d1eb ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-18 19:54:24 +10:00
Gleb Fotengauer-Malinovskiy
c632517923 tty: Fix TIOCGPTPEER ioctl definition
This ioctl does nothing to justify an _IOC_READ or _IOC_WRITE flag
because it doesn't copy anything from/to userspace to access the
argument.

Fixes: 54ebbfb160 ("tty: add TIOCGPTPEER ioctl")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Aleksa Sarai <asarai@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 17:04:41 +02:00
Linus Torvalds
89cbec71fe Merge branch 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uacess-unaligned removal from Al Viro:
 "That stuff had just one user, and an exotic one, at that - binfmt_flat
  on arm and m68k"

* 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kill {__,}{get,put}_user_unaligned()
  binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
2017-07-15 11:17:52 -07:00
Linus Torvalds
deed9deb62 powerpc fixes for 4.13 #2
Nothing that really stands out, just a bunch of fixes that have come in in the
 last couple of weeks.
 
 None of these are actually fixes for code that is new in 4.13. It's roughly half
 older bugs, with fixes going to stable, and half fixes/updates for Power9.
 
 Thanks to:
   Aneesh Kumar K.V, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt,
   Madhavan Srinivasan, Michael Neuling, Nicholas Piggin, Oliver O'Halloran.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZaJKuAAoJEFHr6jzI4aWAojsQAI/Mnu3T9XCPbcuWJVHiNZu2
 CubNKFb9H+HdjRZlgdT7dpx0XITCNWziQmBpQZO+w1kwa3s5uv5qNwj8I30HyTFH
 qAArMq2Yb7GIW4PR8IpbSdCEWZii4YcIiLYk3kiEMyC2UIWeznBq+j79jFyITd9T
 beevhLLq7dMoLO8T2VRSdp4YhdLKNYmgjQG1YFh3YIh8s/tyPQ0OsDaxNk5z8wgt
 /htWiVQ2X/xWRHBnVKT4olc97pXqTvtaCdBWjD/fKNZK50YIwAjr2cJVoXpJidAW
 POwwMto7rjSJDYpE6IgqQnhz0VqRTNB/4QkyaeHJkt6BPhAaafkrHZYtDgc2GaUJ
 G96J6xT9bwHn8Jz1tpsxSgSA9A2GfBhdOUKMpIUVn1l9Q1ELPA0dJzzagLhgRDRG
 w97UQ+CJqvRNfJkRHcuJbNqP5i++6yOHcHGB8QLkmkSYVcCm9Hj/fMXj/DJ5tHt/
 c9t6uw25eqI7raFcxfh09+QTX8VDV96fa+GTo1HnCH71nGG2GqCoJFXyb3HEW64s
 gD7uOPOlFlqfpuGDmV1kmdwH0R15EIJb2b6QsDssrcHEg5fA6z/xcAcV839c9y47
 U8tcBiqFF0vWgB1QljTDrKuNsjg8dIeZfkSekBGD0WuBVLSADBl7f3b2k3BZB5H3
 WxosyR4ufSVfw53HaDsb
 =6eIT
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Nothing that really stands out, just a bunch of fixes that have come
  in in the last couple of weeks.

  None of these are actually fixes for code that is new in 4.13. It's
  roughly half older bugs, with fixes going to stable, and half
  fixes/updates for Power9.

  Thanks to: Aneesh Kumar K.V, Anton Blanchard, Balbir Singh, Benjamin
  Herrenschmidt, Madhavan Srinivasan, Michael Neuling, Nicholas Piggin,
  Oliver O'Halloran"

* tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Fix atomic64_inc_not_zero() to return an int
  powerpc: Fix emulation of mfocrf in emulate_step()
  powerpc: Fix emulation of mcrf in emulate_step()
  powerpc/perf: Add POWER9 alternate PM_RUN_CYC and PM_RUN_INST_CMPL events
  powerpc/perf: Fix SDAR_MODE value for continous sampling on Power9
  powerpc/asm: Mark cr0 as clobbered in mftb()
  powerpc/powernv: Fix local TLB flush for boot and MCE on POWER9
  powerpc/mm/radix: Synchronize updates to the process table
  powerpc/mm/radix: Properly clear process table entry
  powerpc/powernv: Tell OPAL about our MMU mode on POWER9
  powerpc/kexec: Fix radix to hash kexec due to IAMR/AMOR
2017-07-14 15:33:15 -07:00
Michal Hocko
dcda9b0471 mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator.  This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER.  It has been always
ignored for smaller sizes.  This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.

Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic.  Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success.  This will work independent of the order and overrides the
default allocator behavior.  Page allocator users have several levels of
guarantee vs.  cost options (take GFP_KERNEL as an example)

 - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
   attempt to free memory at all. The most light weight mode which even
   doesn't kick the background reclaim. Should be used carefully because
   it might deplete the memory and the next user might hit the more
   aggressive reclaim

 - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
   allocation without any attempt to free memory from the current
   context but can wake kswapd to reclaim memory if the zone is below
   the low watermark. Can be used from either atomic contexts or when
   the request is a performance optimization and there is another
   fallback for a slow path.

 - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
   non sleeping allocation with an expensive fallback so it can access
   some portion of memory reserves. Usually used from interrupt/bh
   context with an expensive slow path fallback.

 - GFP_KERNEL - both background and direct reclaim are allowed and the
   _default_ page allocator behavior is used. That means that !costly
   allocation requests are basically nofail but there is no guarantee of
   that behavior so failures have to be checked properly by callers
   (e.g. OOM killer victim is allowed to fail currently).

 - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
   and all allocation requests fail early rather than cause disruptive
   reclaim (one round of reclaim in this implementation). The OOM killer
   is not invoked.

 - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
   behavior and all allocation requests try really hard. The request
   will fail if the reclaim cannot make any progress. The OOM killer
   won't be triggered.

 - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
   and all allocation requests will loop endlessly until they succeed.
   This might be really dangerous especially for larger orders.

Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic.  No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.

This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.

[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
  Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
  Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00
Nicholas Piggin
2104180a53 powerpc/64s: implement arch-specific hardlockup watchdog
Implement an arch-speicfic watchdog rather than use the perf-based
hardlockup detector.

The new watchdog takes the soft-NMI directly, rather than going through
perf.  Perf interrupts are to be made maskable in future, so that would
prevent the perf detector from working in those regions.

Additionally, implement a SMP based detector where all CPUs watch one
another by pinging a shared cpumask.  This is because powerpc Book3S
does not have a true periodic local NMI, but some platforms do implement
a true NMI IPI.

If a CPU is stuck with interrupts hard disabled, the soft-NMI watchdog
does not work, but the SMP watchdog will.  Even on platforms without a
true NMI IPI to get a good trace from the stuck CPU, other CPUs will
notice the lockup sufficiently to report it and panic.

[npiggin@gmail.com: honor watchdog disable at boot/hotplug]
  Link: http://lkml.kernel.org/r/20170621001346.5bb337c9@roar.ozlabs.ibm.com
[npiggin@gmail.com: fix false positive warning at CPU unplug]
  Link: http://lkml.kernel.org/r/20170630080740.20766-1-npiggin@gmail.com
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170616065715.18390-6-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Tested-by: Babu Moger <babu.moger@oracle.com>	[sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:02 -07:00
Michael Ellerman
01e6a61ace powerpc/64: Fix atomic64_inc_not_zero() to return an int
Although it's not documented anywhere, there is an expectation that
atomic64_inc_not_zero() returns a result which fits in an int. This is
the behaviour implemented on all arches except powerpc.

This has caused at least one bug in practice, in the percpu-refcount
code, where the long result from our atomic64_inc_not_zero() was
truncated to an int leading to lost references and stuck systems. That
was worked around in that code in commit 966d2b04e0 ("percpu-refcount:
fix reference leak during percpu-atomic transition").

To the best of my grepping abilities there are no other callers
in-tree which truncate the value, but we should fix it anyway. Because
the breakage is subtle and potentially very harmful I'm also tagging
it for stable.

Code generation is largely unaffected because in most cases the
callers are just using the result for a test anyway. In particular the
case of fget() that was mentioned in commit a6cf7ed511
("powerpc/atomic: Implement atomic*_inc_not_zero") generates exactly
the same code.

Fixes: a6cf7ed511 ("powerpc/atomic: Implement atomic*_inc_not_zero")
Cc: stable@vger.kernel.org # v3.4
Noticed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-12 21:49:55 +10:00
Oliver O'Halloran
2400fd822f powerpc/asm: Mark cr0 as clobbered in mftb()
The workaround for the CELL timebase bug does not correctly mark cr0 as
being clobbered. This means GCC doesn't know that the asm block changes cr0 and
might leave the result of an unrelated comparison in cr0 across the block, which
we then trash, leading to basically random behaviour.

Fixes: 859deea949 ("[POWERPC] Cell timebase bug workaround")
Cc: stable@vger.kernel.org # v2.6.19+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Tweak change log and flag for stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-11 12:53:53 +10:00
Kees Cook
47ebb09d54 powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.

For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
address space for 32-bit pointers.  On 32-bit use 4MB, which is the
traditional x86 minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided).

Link: http://lkml.kernel.org/r/1498154792-49952-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:36 -07:00
Benjamin Herrenschmidt
1c0eaf0f56 powerpc/powernv: Tell OPAL about our MMU mode on POWER9
That will allow OPAL to configure the CPU in an optimal way.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-10 21:12:27 +10:00
Linus Torvalds
d691b7e7d1 powerpc updates for 4.13
Highlights include:
 
  - Support for STRICT_KERNEL_RWX on 64-bit server CPUs.
 
  - Platform support for FSP2 (476fpe) board
 
  - Enable ZONE_DEVICE on 64-bit server CPUs.
 
  - Generic & powerpc spin loop primitives to optimise busy waiting
 
  - Convert VDSO update function to use new update_vsyscall() interface
 
  - Optimisations to hypercall/syscall/context-switch paths
 
  - Improvements to the CPU idle code on Power8 and Power9.
 
 As well as many other fixes and improvements.
 
 Thanks to:
   Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton
   Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe
   Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian
   Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan,
   Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo
   Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul
   Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell,
   Thiago Jung Bauermann, Yang Li.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZXyPCAAoJEFHr6jzI4aWAI9QQAISf2x5y//cqCi4ISyQB5pTq
 KLS/yQajNkQOw7c0fzBZOaH5Xd/SJ6AcKWDg8yDlpDR3+sRRsr98iIRECgKS5I7/
 DxD9ywcbSoMXFQQo1ZMCp5CeuMUIJRtugBnUQM+JXCSUCPbznCY5DchDTLyTBTpO
 MeMVhI//JxthhoOMA9MudiEGaYCU9ho442Z4OJUSiLUv8WRbvQX9pTqoc4vx1fxA
 BWf2mflztBVcIfKIyxIIIlDLukkMzix6gSYPMCbC7lzkbnU7JSqKiheJXjo1gJS2
 ePHKDxeNR2/QP0g/j3aT/MR1uTt9MaNBSX3gANE1xQ9OoJ8m1sOtCO4gNbSdLWae
 eXhDnoiEp930DRZOeEioOItuWWoxFaMyYk3BMmRKV4QNdYL3y3TRVeL2/XmRGqYL
 Lxz4IY/x5TteFEJNGcRX90uizNSi8AaEXPF16pUk8Ctt6eH3ZSwPMv2fHeYVCMr0
 KFlKHyaPEKEoztyzLcUR6u9QB56yxDN58bvLpd32AeHvKhqyxFoySy59x9bZbatn
 B2y8mmDItg860e0tIG6jrtplpOVvL8i5jla5RWFVoQDuxxrLAds3vG9JZQs+eRzx
 Fiic93bqeUAS6RzhXbJ6QQJYIyhE7yqpcgv7ME1W87SPef3HPBk9xlp3yIDwdA2z
 bBDvrRnvupusz8qCWrxe
 =w8rj
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for STRICT_KERNEL_RWX on 64-bit server CPUs.

   - Platform support for FSP2 (476fpe) board

   - Enable ZONE_DEVICE on 64-bit server CPUs.

   - Generic & powerpc spin loop primitives to optimise busy waiting

   - Convert VDSO update function to use new update_vsyscall() interface

   - Optimisations to hypercall/syscall/context-switch paths

   - Improvements to the CPU idle code on Power8 and Power9.

  As well as many other fixes and improvements.

  Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman
  Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt,
  Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter,
  Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier
  Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown,
  Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N.
  Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek,
  Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung
  Bauermann, Yang Li"

* tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs
  powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix
  powerpc/mm/hash: Implement mark_rodata_ro() for hash
  powerpc/vmlinux.lds: Align __init_begin to 16M
  powerpc/lib/code-patching: Use alternate map for patch_instruction()
  powerpc/xmon: Add patch_instruction() support for xmon
  powerpc/kprobes/optprobes: Use patch_instruction()
  powerpc/kprobes: Move kprobes over to patch_instruction()
  powerpc/mm/radix: Fix execute permissions for interrupt_vectors
  powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp()
  powerpc/64s: Blacklist rtas entry/exit from kprobes
  powerpc/64s: Blacklist functions invoked on a trap
  powerpc/64s: Un-blacklist system_call() from kprobes
  powerpc/64s: Move system_call() symbol to just after setting MSR_EE
  powerpc/64s: Blacklist system_call() and system_call_common() from kprobes
  powerpc/64s: Convert .L__replay_interrupt_return to a local label
  powerpc64/elfv1: Only dereference function descriptor for non-text symbols
  cxl: Export library to support IBM XSL
  powerpc/dts: Use #include "..." to include local DT
  powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8
  ...
2017-07-07 13:55:45 -07:00
Linus Torvalds
9f45efb928 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - a few hotfixes

 - various misc updates

 - ocfs2 updates

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits)
  mm, memory_hotplug: move movable_node to the hotplug proper
  mm, memory_hotplug: drop CONFIG_MOVABLE_NODE
  mm, memory_hotplug: drop artificial restriction on online/offline
  mm: memcontrol: account slab stats per lruvec
  mm: memcontrol: per-lruvec stats infrastructure
  mm: memcontrol: use generic mod_memcg_page_state for kmem pages
  mm: memcontrol: use the node-native slab memory counters
  mm: vmstat: move slab statistics from zone to node counters
  mm/zswap.c: delete an error message for a failed memory allocation in zswap_dstmem_prepare()
  mm/zswap.c: improve a size determination in zswap_frontswap_init()
  mm/zswap.c: delete an error message for a failed memory allocation in zswap_pool_create()
  mm/swapfile.c: sort swap entries before free
  mm/oom_kill: count global and memory cgroup oom kills
  mm: per-cgroup memory reclaim stats
  mm: kmemleak: treat vm_struct as alternative reference to vmalloc'ed objects
  mm: kmemleak: factor object reference updating out of scan_block()
  mm: kmemleak: slightly reduce the size of some structures on 64-bit architectures
  mm, mempolicy: don't check cpuset seqlock where it doesn't matter
  mm, cpuset: always use seqlock when changing task's nodemask
  mm, mempolicy: simplify rebinding mempolicies when updating cpusets
  ...
2017-07-06 22:27:08 -07:00
Linus Torvalds
dc502142b6 Merge branch 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull user access str* updates from Al Viro:
 "uaccess str...() dead code removal"

* 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  s390 keyboard.c: don't open-code strndup_user()
  mips: get rid of unused __strnlen_user()
  get rid of unused __strncpy_from_user() instances
  kill strlen_user()
2017-07-06 22:07:44 -07:00
Linus Torvalds
c856863988 Merge branch 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc compat stuff updates from Al Viro:
 "This part is basically untangling various compat stuff. Compat
  syscalls moved to their native counterparts, getting rid of quite a
  bit of double-copying and/or set_fs() uses. A lot of field-by-field
  copyin/copyout killed off.

   - kernel/compat.c is much closer to containing just the
     copyin/copyout of compat structs. Not all compat syscalls are gone
     from it yet, but it's getting there.

   - ipc/compat_mq.c killed off completely.

   - block/compat_ioctl.c cleaned up; floppy compat ioctls moved to
     drivers/block/floppy.c where they belong. Yes, there are several
     drivers that implement some of the same ioctls. Some are m68k and
     one is 32bit-only pmac. drivers/block/floppy.c is the only one in
     that bunch that can be built on biarch"

* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  mqueue: move compat syscalls to native ones
  usbdevfs: get rid of field-by-field copyin
  compat_hdio_ioctl: get rid of set_fs()
  take floppy compat ioctls to sodding floppy.c
  ipmi: get rid of field-by-field __get_user()
  ipmi: get COMPAT_IPMICTL_RECEIVE_MSG in sync with the native one
  rt_sigtimedwait(): move compat to native
  select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap()
  put_compat_rusage(): switch to copy_to_user()
  sigpending(): move compat to native
  getrlimit()/setrlimit(): move compat to native
  times(2): move compat to native
  compat_{get,put}_bitmap(): use unsafe_{get,put}_user()
  fb_get_fscreeninfo(): don't bother with do_fb_ioctl()
  do_sigaltstack(): lift copying to/from userland into callers
  take compat_sys_old_getrlimit() to native syscall
  trim __ARCH_WANT_SYS_OLD_GETRLIMIT
2017-07-06 20:57:13 -07:00
Linus Torvalds
f72e24a124 This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
 code related to dma-mapping, and will further consolidate arch code
 into common helpers.
 
 This pull request contains:
 
  - removal of the DMA_ERROR_CODE macro, replacing it with calls
    to ->mapping_error so that the dma_map_ops instances are
    more self contained and can be shared across architectures (me)
  - removal of the ->set_dma_mask method, which duplicates the
    ->dma_capable one in terms of functionality, but requires more
    duplicate code.
  - various updates for the coherent dma pool and related arm code
    (Vladimir)
  - various smaller cleanups (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlldmw0LHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOiKA/+Ln1mFLSf3nfTzIHa24Bbk8ZTGr0B8TD4Vmyyt8iG
 oO3AeaTLn3d6ugbH/uih/tPz8PuyXsdiTC1rI/ejDMiwMTSjW6phSiIHGcStSR9X
 VFNhmMFacp7QpUpvxceV0XZYKDViAoQgHeGdp3l+K5h/v4AYePV/v/5RjQPaEyOh
 YLbCzETO+24mRWdJxdAqtTW4ovYhzj6XsiJ+pAjlV0+SWU6m5L5E+VAPNi1vqv1H
 1O2KeCFvVYEpcnfL3qnkw2timcjmfCfeFAd9mCUAc8mSRBfs3QgDTKw3XdHdtRml
 LU2WuA5cpMrOdBO4mVra2plo8E2szvpB1OZZXoKKdCpK3VGwVpVHcTvClK2Ks/3B
 GDLieroEQNu2ZIUIdWXf/g2x6le3BcC9MmpkAhnGPqCZ7skaIBO5Cjpxm0zTJAPl
 PPY3CMBBEktAvys6DcudOYGixNjKUuAm5lnfpcfTEklFdG0AjhdK/jZOplAFA6w4
 LCiy0rGHM8ZbVAaFxbYoFCqgcjnv6EjSiqkJxVI4fu/Q7v9YXfdPnEmE0PJwCVo5
 +i7aCLgrYshTdHr/F3e5EuofHN3TDHwXNJKGh/x97t+6tt326QMvDKX059Kxst7R
 rFukGbrYvG8Y7yXwrSDbusl443ta0Ht7T1oL4YUoJTZp0nScAyEluDTmrH1JVCsT
 R4o=
 =0Fso
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping infrastructure from Christoph Hellwig:
 "This is the first pull request for the new dma-mapping subsystem

  In this new subsystem we'll try to properly maintain all the generic
  code related to dma-mapping, and will further consolidate arch code
  into common helpers.

  This pull request contains:

   - removal of the DMA_ERROR_CODE macro, replacing it with calls to
     ->mapping_error so that the dma_map_ops instances are more self
     contained and can be shared across architectures (me)

   - removal of the ->set_dma_mask method, which duplicates the
     ->dma_capable one in terms of functionality, but requires more
     duplicate code.

   - various updates for the coherent dma pool and related arm code
     (Vladimir)

   - various smaller cleanups (me)"

* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
  ARM: dma-mapping: Remove traces of NOMMU code
  ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
  ARM: NOMMU: Introduce dma operations for noMMU
  drivers: dma-mapping: allow dma_common_mmap() for NOMMU
  drivers: dma-coherent: Introduce default DMA pool
  drivers: dma-coherent: Account dma_pfn_offset when used with device tree
  dma: Take into account dma_pfn_offset
  dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
  dma-mapping: remove dmam_free_noncoherent
  crypto: qat - avoid an uninitialized variable warning
  au1100fb: remove a bogus dma_free_nonconsistent call
  MAINTAINERS: add entry for dma mapping helpers
  powerpc: merge __dma_set_mask into dma_set_mask
  dma-mapping: remove the set_dma_mask method
  powerpc/cell: use the dma_supported method for ops switching
  powerpc/cell: clean up fixed mapping dma_ops initialization
  tile: remove dma_supported and mapping_error methods
  xen-swiotlb: remove xen_swiotlb_set_dma_mask
  arm: implement ->dma_supported instead of ->set_dma_mask
  mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
  ...
2017-07-06 19:20:54 -07:00
Linus Torvalds
c136b84393 PPC:
- Better machine check handling for HV KVM
 - Ability to support guests with threads=2, 4 or 8 on POWER9
 - Fix for a race that could cause delayed recognition of signals
 - Fix for a bug where POWER9 guests could sleep with interrupts pending.
 
 ARM:
 - VCPU request overhaul
 - allow timer and PMU to have their interrupt number selected from userspace
 - workaround for Cavium erratum 30115
 - handling of memory poisonning
 - the usual crop of fixes and cleanups
 
 s390:
 - initial machine check forwarding
 - migration support for the CMMA page hinting information
 - cleanups and fixes
 
 x86:
 - nested VMX bugfixes and improvements
 - more reliable NMI window detection on AMD
 - APIC timer optimizations
 
 Generic:
 - VCPU request overhaul + documentation of common code patterns
 - kvm_stat improvements
 
 There is a small conflict in arch/s390 due to an arch-wide field rename.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJZW4XTAAoJEL/70l94x66DkhMH/izpk54KI17PtyQ9VYI2sYeZ
 BWK6Kl886g3ij4pFi3pECqjDJzWaa3ai+vFfzzpJJ8OkCJT5Rv4LxC5ERltVVmR8
 A3T1I/MRktSC0VJLv34daPC2z4Lco/6SPipUpPnL4bE2HATKed4vzoOjQ3tOeGTy
 dwi7TFjKwoVDiM7kPPDRnTHqCe5G5n13sZ49dBe9WeJ7ttJauWqoxhlYosCGNPEj
 g8ZX8+cvcAhVnz5uFL8roqZ8ygNEQq2mgkU18W8ZZKuiuwR0gdsG0gSBFNTdwIMK
 NoreRKMrw0+oLXTIB8SZsoieU6Qi7w3xMAMabe8AJsvYtoersugbOmdxGCr1lsA=
 =OD7H
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "PPC:
   - Better machine check handling for HV KVM
   - Ability to support guests with threads=2, 4 or 8 on POWER9
   - Fix for a race that could cause delayed recognition of signals
   - Fix for a bug where POWER9 guests could sleep with interrupts pending.

  ARM:
   - VCPU request overhaul
   - allow timer and PMU to have their interrupt number selected from userspace
   - workaround for Cavium erratum 30115
   - handling of memory poisonning
   - the usual crop of fixes and cleanups

  s390:
   - initial machine check forwarding
   - migration support for the CMMA page hinting information
   - cleanups and fixes

  x86:
   - nested VMX bugfixes and improvements
   - more reliable NMI window detection on AMD
   - APIC timer optimizations

  Generic:
   - VCPU request overhaul + documentation of common code patterns
   - kvm_stat improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits)
  Update my email address
  kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
  x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12
  kvm: x86: mmu: allow A/D bits to be disabled in an mmu
  x86: kvm: mmu: make spte mmio mask more explicit
  x86: kvm: mmu: dead code thanks to access tracking
  KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code
  KVM: PPC: Book3S HV: Close race with testing for signals on guest entry
  KVM: PPC: Book3S HV: Simplify dynamic micro-threading code
  KVM: x86: remove ignored type attribute
  KVM: LAPIC: Fix lapic timer injection delay
  KVM: lapic: reorganize restart_apic_timer
  KVM: lapic: reorganize start_hv_timer
  kvm: nVMX: Check memory operand to INVVPID
  KVM: s390: Inject machine check into the nested guest
  KVM: s390: Inject machine check into the guest
  tools/kvm_stat: add new interactive command 'b'
  tools/kvm_stat: add new command line switch '-i'
  tools/kvm_stat: fix error on interactive command 'g'
  KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit
  ...
2017-07-06 18:38:31 -07:00
Aneesh Kumar K.V
40692eb5ee powerpc/mm/hugetlb: add support for 1G huge pages
POWER9 supports hugepages of size 2M and 1G in radix MMU mode.  This
patch enables the usage of 1G page size for hugetlbfs.  This also update
the helper such we can do 1G page allocation at runtime.

We still don't enable 1G page size on DD1 version.  This is to avoid
doing workaround mentioned in commit 6d3a0379eb ("powerpc/mm: Add
radix__tlb_flush_pte_p9_dd1()").

Link: http://lkml.kernel.org/r/1494995292-4443-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:33 -07:00
Linus Torvalds
5518b69b76 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...
2017-07-05 12:31:59 -07:00
Linus Torvalds
9a715cd543 TTY/Serial patches for 4.13-rc1
Here is the large tty/serial patchset for 4.13-rc1.
 
 A lot of tty and serial driver updates are in here, along with some
 fixups for some __get/put_user usages that were reported.  Nothing huge,
 just lots of development by a number of different developers, full
 details in the shortlog.
 
 All of these have been in linux-next for a while.  There will be a merge
 issue with the arm-soc tree in the include/linux/platform_data/atmel.h
 file.  Stephen has sent out a fixup for it, so it shouldn't be that
 difficult to merge.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpZ9w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylkTgCfV2HhbxIph/aEL1nJmwW64oCXFrMAoK59ZH65
 tBZIosv0d91K1A+mObBT
 =adPL
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the large tty/serial patchset for 4.13-rc1.

  A lot of tty and serial driver updates are in here, along with some
  fixups for some __get/put_user usages that were reported. Nothing
  huge, just lots of development by a number of different developers,
  full details in the shortlog.

  All of these have been in linux-next for a while"

* tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
  tty: serial: lpuart: add a more accurate baud rate calculation method
  tty: serial: lpuart: add earlycon support for imx7ulp
  tty: serial: lpuart: add imx7ulp support
  dt-bindings: serial: fsl-lpuart: add i.MX7ULP support
  tty: serial: lpuart: add little endian 32 bit register support
  tty: serial: lpuart: refactor lpuart32_{read|write} prototype
  tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property
  serial: imx-serial - move DMA buffer configuration to DT
  serial: imx: Enable RTSD only when needed
  serial: imx: Remove unused members from imx_port struct
  serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout
  serial: 8250: Fix THRE flag usage for CAP_MINI
  tty/serial: meson_uart: update to stable bindings
  dt-bindings: serial: Add bindings for the Amlogic Meson UARTs
  serial: Delete dead code for CIR serial ports
  serial: sirf: make of_device_ids const
  serial/mpsc: switch to dma_alloc_attrs
  tty: serial: Add Actions Semi Owl UART earlycon
  dt-bindings: serial: Document Actions Semi Owl UARTs
  tty/serial: atmel: make the driver DT only
  ...
2017-07-03 20:04:16 -07:00
Balbir Singh
cd65d69713 powerpc/mm/hash: Implement mark_rodata_ro() for hash
With hash we update the bolted pte to mark it read-only. We rely
on the MMU_FTR_KERNEL_RO to generate the correct permissions
for read-only text. The radix implementation just prints a warning
in this implementation

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Make the warning louder when we don't have MMU_FTR_KERNEL_RO]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-04 11:35:16 +10:00
Linus Torvalds
9a9594efe5 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP hotplug updates from Thomas Gleixner:
 "This update is primarily a cleanup of the CPU hotplug locking code.

  The hotplug locking mechanism is an open coded RWSEM, which allows
  recursive locking. The main problem with that is the recursive nature
  as it evades the full lockdep coverage and hides potential deadlocks.

  The rework replaces the open coded RWSEM with a percpu RWSEM and
  establishes full lockdep coverage that way.

  The bulk of the changes fix up recursive locking issues and address
  the now fully reported potential deadlocks all over the place. Some of
  these deadlocks have been observed in the RT tree, but on mainline the
  probability was low enough to hide them away."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  cpu/hotplug: Constify attribute_group structures
  powerpc: Only obtain cpu_hotplug_lock if called by rtasd
  ARM/hw_breakpoint: Fix possible recursive locking for arch_hw_breakpoint_init
  cpu/hotplug: Remove unused check_for_tasks() function
  perf/core: Don't release cred_guard_mutex if not taken
  cpuhotplug: Link lock stacks for hotplug callbacks
  acpi/processor: Prevent cpu hotplug deadlock
  sched: Provide is_percpu_thread() helper
  cpu/hotplug: Convert hotplug locking to percpu rwsem
  s390: Prevent hotplug rwsem recursion
  arm: Prevent hotplug rwsem recursion
  arm64: Prevent cpu hotplug rwsem recursion
  kprobes: Cure hotplug lock ordering issues
  jump_label: Reorder hotplug lock and jump_label_lock
  perf/tracing/cpuhotplug: Fix locking order
  ACPI/processor: Use cpu_hotplug_disable() instead of get_online_cpus()
  PCI: Replace the racy recursion prevention
  PCI: Use cpu_hotplug_disable() instead of get_online_cpus()
  perf/x86/intel: Drop get_online_cpus() in intel_snb_check_microcode()
  x86/perf: Drop EXPORT of perf_check_microcode
  ...
2017-07-03 18:08:06 -07:00
Al Viro
3170d8d226 kill {__,}{get,put}_user_unaligned()
no users left

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-03 18:44:22 -04:00
Naveen N. Rao
83e840c770 powerpc64/elfv1: Only dereference function descriptor for non-text symbols
Currently, we assume that the function pointer we receive in
ppc_function_entry() points to a function descriptor. However, this is
not always the case. In particular, assembly symbols without the right
annotation do not have an associated function descriptor. Some of these
symbols are added to the kprobe blacklist using _ASM_NOKPROBE_SYMBOL().

When such addresses are subsequently processed through
arch_deref_entry_point() in populate_kprobe_blacklist(), we see the
below errors during bootup:
    [    0.663963] Failed to find blacklist at 7d9b02a648029b6c
    [    0.663970] Failed to find blacklist at a14d03d0394a0001
    [    0.663972] Failed to find blacklist at 7d5302a6f94d0388
    [    0.663973] Failed to find blacklist at 48027d11e8610178
    [    0.663974] Failed to find blacklist at f8010070f8410080
    [    0.663976] Failed to find blacklist at 386100704801f89d
    [    0.663977] Failed to find blacklist at 7d5302a6f94d00b0

Fix this by checking if the function pointer we receive in
ppc_function_entry() already points to kernel text. If so, we just
return it as is. If not, we assume that this is a function descriptor
and proceed to dereference it.

Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-03 23:08:50 +10:00
Christophe Lombard
3ced8d7300 cxl: Export library to support IBM XSL
This patch exports a in-kernel 'library' API which can be called by
other drivers to help interacting with an IBM XSL on a POWER9 system.

The XSL (Translation Service Layer) is a stripped down version of the
PSL (Power Service Layer) used in some cards such as the Mellanox CX5.
Like the PSL, it implements the CAIA architecture, but has a number
of differences, mostly in it's implementation dependent registers.

The XSL also uses a special DMA cxl mode, which uses a slightly
different init sequence for the CAPP and PHB.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-03 23:07:03 +10:00
Michael Ellerman
218ea31039 Merge branch 'fixes' into next
Merge our fixes branch, a few of them are tripping people up while
working on top of next, and we also have a dependency between the CXL
fixes and new CXL code we want to merge into next.
2017-07-03 23:05:43 +10:00
Paolo Bonzini
8a53e7e572 Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
- Better machine check handling for HV KVM
- Ability to support guests with threads=2, 4 or 8 on POWER9
- Fix for a race that could cause delayed recognition of signals
- Fix for a bug where POWER9 guests could sleep with interrupts
  pending.
2017-07-03 10:41:59 +02:00
Oliver O'Halloran
ebd3119793 powerpc/mm: Add devmap support for ppc64
Add support for the devmap bit on PTEs and PMDs for PPC64 Book3S.  This
is used to differentiate device backed memory from transparent huge
pages since they are handled in more or less the same manner by the core
mm code.

Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02 20:40:28 +10:00
Nicholas Piggin
4e287e655e powerpc: use spin loop primitives in some functions
Use the different spin loop primitives in some simple powerpc
spin loops, including those which will spin as a common case.

This will help to test the spin loop primitives before more
conversions are done.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add some includes of <linux/processor.h>]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02 20:40:24 +10:00