Move the retrieval of the HPA associated with L1's APIC access page into
VMX code to avoid unnecessarily calling gfn_to_page(), e.g. when the
vCPU is in guest mode (L2). Alternatively, the optimization logic in
VMX could be mirrored into the common x86 code, but that will get ugly
fast when further optimizations are introduced.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-29-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Defer reloading L1's APIC page by logging the need for a reload and
processing it during nested VM-Exit instead of unconditionally reloading
the APIC page on nested VM-Exit. This eliminates a TLB flush on the
majority of VM-Exits as the APIC page rarely needs to be reloaded.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-28-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush only the current context, as opposed to all contexts, when
requesting a TLB flush to handle the scenario where a L1 does not expect
a TLB flush, but one is required because L1 and L2 shared an ASID. This
occurs if EPT is disabled (no per-EPTP tag), VPID is enabled (hardware
doesn't flush unconditionally) and vmcs02 does not have its own VPID due
to exhaustion of available VPIDs.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-27-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add KVM_REQ_TLB_FLUSH_CURRENT to allow optimized TLB flushing of VMX's
EPTP/VPID contexts[*] from the KVM MMU and/or in a deferred manner, e.g.
to flush L2's context during nested VM-Enter.
Convert KVM_REQ_TLB_FLUSH to KVM_REQ_TLB_FLUSH_CURRENT in flows where
the flush is directly associated with vCPU-scoped instruction emulation,
i.e. MOV CR3 and INVPCID.
Add a comment in vmx_vcpu_load_vmcs() above its KVM_REQ_TLB_FLUSH to
make it clear that it deliberately requests a flush of all contexts.
Service any pending flush request on nested VM-Exit as it's possible a
nested VM-Exit could occur after requesting a flush for L2. Add the
same logic for nested VM-Enter even though it's _extremely_ unlikely
for flush to be pending on nested VM-Enter, but theoretically possible
(in the future) due to RSM (SMM) emulation.
[*] Intel also has an Address Space Identifier (ASID) concept, e.g.
EPTP+VPID+PCID == ASID, it's just not documented in the SDM because
the rules of invalidation are different based on which piece of the
ASID is being changed, i.e. whether the EPTP, VPID, or PCID context
must be invalidated.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-25-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper to determine whether or not a full TLB flush needs to be
performed on nested VM-Enter/VM-Exit, as the logic is identical for both
flows and needs a fairly beefy comment to boot. This also provides a
common point to make future adjustments to the logic.
Handle vpid12 changes the new helper as well even though it is specific
to VM-Enter. The vpid12 logic is an extension of the flushing logic,
and it's worth the extra bool parameter to provide a single location for
the flushing logic.
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-24-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename ->tlb_flush() to ->tlb_flush_all() in preparation for adding a
new hook to flush only the current ASID/context.
Opportunstically replace the comment in vmx_flush_tlb() that explains
why it flushes all EPTP/VPID contexts with a comment explaining why it
unconditionally uses INVEPT when EPT is enabled. I.e. rely on the "all"
part of the name to clarify why it does global INVEPT/INVVPID.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-23-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper to flush TLB entries only for the current EPTP/VPID context
and use it for the existing direct invocations of vmx_flush_tlb(). TLB
flushes that are specific to the current vCPU state do not need to flush
other contexts.
Note, both converted call sites happen to be related to the APIC access
page, this is purely coincidental.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-21-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move nested_get_vpid02() to vmx/nested.h so that a future patch can
reference it from vmx.c to implement context-specific TLB flushing.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-20-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vmx_flush_tlb() to vmx.c and make it non-inline static now that all
its callers live in vmx.c.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-19-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @invalidate_gpa from ->tlb_flush() and kvm_vcpu_flush_tlb() now
that all callers pass %true for said param, or ignore the param (SVM has
an internal call to svm_flush_tlb() in svm_flush_tlb_guest that somewhat
arbitrarily passes %false).
Remove __vmx_flush_tlb() as it is no longer used.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-17-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor vmx_flush_tlb_gva() to remove a superfluous local variable and
clean up its comment, which is oddly located below the code it is
commenting.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-16-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a dedicated hook to handle flushing TLB entries on behalf of the
guest, i.e. for a paravirtualized TLB flush, and use it directly instead
of bouncing through kvm_vcpu_flush_tlb().
For VMX, change the effective implementation implementation to never do
INVEPT and flush only the current context, i.e. to always flush via
INVVPID(SINGLE_CONTEXT). The INVEPT performed by __vmx_flush_tlb() when
@invalidate_gpa=false and enable_vpid=0 is unnecessary, as it will only
flush guest-physical mappings; linear and combined mappings are flushed
by VM-Enter when VPID is disabled, and changes in the guest pages tables
do not affect guest-physical mappings.
When EPT and VPID are enabled, doing INVVPID is not required (by Intel's
architecture) to invalidate guest-physical mappings, i.e. TLB entries
that cache guest-physical mappings can live across INVVPID as the
mappings are associated with an EPTP, not a VPID. The intent of
@invalidate_gpa is to inform vmx_flush_tlb() that it must "invalidate
gpa mappings", i.e. do INVEPT and not simply INVVPID. Other than nested
VPID handling, which now calls vpid_sync_context() directly, the only
scenario where KVM can safely do INVVPID instead of INVEPT (when EPT is
enabled) is if KVM is flushing TLB entries from the guest's perspective,
i.e. is only required to invalidate linear mappings.
For SVM, flushing TLB entries from the guest's perspective can be done
by flushing the current ASID, as changes to the guest's page tables are
associated only with the current ASID.
Adding a dedicated ->tlb_flush_guest() paves the way toward removing
@invalidate_gpa, which is a potentially dangerous control flag as its
meaning is not exactly crystal clear, even for those who are familiar
with the subtleties of what mappings Intel CPUs are/aren't allowed to
keep across various invalidation scenarios.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-15-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vpid_sync_vcpu_addr() to emulate the "individual address" variant of
INVVPID now that said function handles the fallback case of the (host)
CPU not supporting "individual address".
Note, the "vpid == 0" checks in the vpid_sync_*() helpers aren't
actually redundant with the "!operand.vpid" check in handle_invvpid(),
as the vpid passed to vpid_sync_vcpu_addr() is a KVM (host) controlled
value, i.e. vpid02 can be zero even if operand.vpid is non-zero.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-14-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the INVVPID capabilities checks from vpid_sync_vcpu_single() and
vpid_sync_vcpu_global() now that all callers ensure the INVVPID variant
is supported. Note, in some cases the guarantee is provided in concert
with hardware_setup(), which enables VPID if and only if at least of
invvpid_single() or invvpid_global() is supported.
Drop the WARN_ON_ONCE() from vmx_flush_tlb() as vpid_sync_vcpu_single()
will trigger a WARN() on INVVPID failure, i.e. if SINGLE_CONTEXT isn't
supported.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-13-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Directly invoke vpid_sync_context() to do a global INVVPID when the
individual address variant is not supported instead of deferring such
behavior to the caller. This allows for additional consolidation of
code as the logic is basically identical to the emulation of the
individual address variant in handle_invvpid().
No functional change intended.
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-12-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vpid_sync_vcpu_addr() below vpid_sync_context() so that it can be
refactored in a future patch to call vpid_sync_context() directly when
the "individual address" INVVPID variant isn't supported.
No functional change intended.
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vpid_sync_context() directly for flows that run if and only if
enable_vpid=1, or more specifically, nested VMX flows that are gated by
vmx->nested.msrs.secondary_ctls_high.SECONDARY_EXEC_ENABLE_VPID being
set, which is allowed if and only if enable_vpid=1. Because these flows
call __vmx_flush_tlb() with @invalidate_gpa=false, the if-statement that
decides between INVEPT and INVVPID will always go down the INVVPID path,
i.e. call vpid_sync_context() because
"enable_ept && (invalidate_gpa || !enable_vpid)" always evaluates false.
This helps pave the way toward removing @invalidate_gpa and @vpid from
__vmx_flush_tlb() and its callers.
Opportunstically drop unnecessary brackets in handle_invvpid() around an
affected __vmx_flush_tlb()->vpid_sync_context() conversion.
No functional change intended.
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the global INVVPID in the unlikely scenario that vpid==0 and the
SINGLE_CONTEXT variant of INVVPID is unsupported. If vpid==0, there's
no need to INVVPID as it's impossible to do VM-Enter with VPID enabled
and vmcs.VPID==0, i.e. there can't be any TLB entries for the vCPU with
vpid==0. The fact that the SINGLE_CONTEXT variant isn't supported is
irrelevant.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When injecting a page fault or EPT violation/misconfiguration, KVM is
not syncing any shadow PTEs associated with the faulting address,
including those in previous MMUs that are associated with L1's current
EPTP (in a nested EPT scenario), nor is it flushing any hardware TLB
entries. All this is done by kvm_mmu_invalidate_gva.
Page faults that are either !PRESENT or RSVD are exempt from the flushing,
as the CPU is not allowed to cache such translations.
Signed-off-by: Junaid Shahid <junaids@google.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free all roots when emulating INVVPID for L1 and EPT is disabled, as
outstanding changes to the page tables managed by L1 need to be
recognized. Because L1 and L2 share an MMU when EPT is disabled, and
because VPID is not tracked by the MMU role, all roots in the current
MMU (root_mmu) need to be freed, otherwise a future nested VM-Enter or
VM-Exit could do a fast CR3 switch (without a flush/sync) and consume
stale SPTEs.
Fixes: 5c614b3583 ("KVM: nVMX: nested VPID emulation")
Signed-off-by: Junaid Shahid <junaids@google.com>
[sean: ported to upstream KVM, reworded the comment and changelog]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-5-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free all L2 (guest_mmu) roots when emulating INVEPT for L1. Outstanding
changes to the EPT tables managed by L1 need to be recognized, and
relying on KVM to always flush L2's EPTP context on nested VM-Enter is
dangerous.
Similar to handle_invpcid(), rely on kvm_mmu_free_roots() to do a remote
TLB flush if necessary, e.g. if L1 has never entered L2 then there is
nothing to be done.
Nuking all L2 roots is overkill for the single-context variant, but it's
the safe and easy bet. A more precise zap mechanism will be added in
the future. Add a TODO to call out that KVM only needs to invalidate
affected contexts.
Fixes: 14c07ad89f ("x86/kvm/mmu: introduce guest_mmu")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-4-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signal VM-Fail for the single-context variant of INVEPT if the specified
EPTP is invalid. Per the INEVPT pseudocode in Intel's SDM, it's subject
to the standard EPT checks:
If VM entry with the "enable EPT" VM execution control set to 1 would
fail due to the EPTP value then VMfail(Invalid operand to INVEPT/INVVPID);
Fixes: bfd0a56b90 ("nEPT: Nested INVEPT")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush all EPTP/VPID contexts if a TLB flush _may_ have been triggered by
a remote or deferred TLB flush, i.e. by KVM_REQ_TLB_FLUSH. Remote TLB
flushes require all contexts to be invalidated, not just the active
contexts, e.g. all mappings in all contexts for a given HVA need to be
invalidated on a mmu_notifier invalidation. Similarly, the instigator
of the deferred TLB flush may be expecting all contexts to be flushed,
e.g. vmx_vcpu_load_vmcs().
Without nested VMX, flushing only the current EPTP/VPID context isn't
problematic because KVM uses a constant VPID for each vCPU, and
mmu_alloc_direct_roots() all but guarantees KVM will use a single EPTP
for L1. In the rare case where a different EPTP is created or reused,
KVM (currently) unconditionally flushes the new EPTP context prior to
entering the guest.
With nested VMX, KVM conditionally uses a different VPID for L2, and
unconditionally uses a different EPTP for L2. Because KVM doesn't
_intentionally_ guarantee L2's EPTP/VPID context is flushed on nested
VM-Enter, it'd be possible for a malicious L1 to attack the host and/or
different VMs by exploiting the lack of flushing for L2.
1) Launch nested guest from malicious L1.
2) Nested VM-Enter to L2.
3) Access target GPA 'g'. CPU inserts TLB entry tagged with L2's ASID
mapping 'g' to host PFN 'x'.
2) Nested VM-Exit to L1.
3) L1 triggers kernel same-page merging (ksm) by duplicating/zeroing
the page for PFN 'x'.
4) Host kernel merges PFN 'x' with PFN 'y', i.e. unmaps PFN 'x' and
remaps the page to PFN 'y'. mmu_notifier sends invalidate command,
KVM flushes TLB only for L1's ASID.
4) Host kernel reallocates PFN 'x' to some other task/guest.
5) Nested VM-Enter to L2. KVM does not invalidate L2's EPTP or VPID.
6) L2 accesses GPA 'g' and gains read/write access to PFN 'x' via its
stale TLB entry.
However, current KVM unconditionally flushes L1's EPTP/VPID context on
nested VM-Exit. But, that behavior is mostly unintentional, KVM doesn't
go out of its way to flush EPTP/VPID on nested VM-Enter/VM-Exit, rather
a TLB flush is guaranteed to occur prior to re-entering L1 due to
__kvm_mmu_new_cr3() always being called with skip_tlb_flush=false. On
nested VM-Enter, this happens via kvm_init_shadow_ept_mmu() (nested EPT
enabled) or in nested_vmx_load_cr3() (nested EPT disabled). On nested
VM-Exit it occurs via nested_vmx_load_cr3().
This also fixes a bug where a deferred TLB flush in the context of L2,
with EPT disabled, would flush L1's VPID instead of L2's VPID, as
vmx_flush_tlb() flushes L1's VPID regardless of is_guest_mode().
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Junaid Shahid <junaids@google.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: John Haxby <john.haxby@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Fixes: efebf0aaec ("KVM: nVMX: Do not flush TLB on L1<->L2 transitions if L1 uses VPID and EPT")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_vmx_exit_reflected() returns a bool, not int. As such, refer to
the return values as true/false in the comment instead of 1/0.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20200414221241.134103-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to SDM 26.6.2, it is possible to inject an MTF VM-exit via the
VM-entry interruption-information field regardless of the 'monitor trap
flag' VM-execution control. KVM appropriately copies the VM-entry
interruption-information field from vmcs12 to vmcs02. However, if L1
has not set the 'monitor trap flag' VM-execution control, KVM fails to
reflect the subsequent MTF VM-exit into L1.
Fix this by consulting the VM-entry interruption-information field of
vmcs12 to determine if L1 has injected the MTF VM-exit. If so, reflect
the exit, regardless of the 'monitor trap flag' VM-execution control.
Fixes: 5f3d45e7f2 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200414224746.240324-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason to limit the use of do_machine_check
to 64bit targets. MCE handling works for both target familes.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Fixes: a0861c02a9 ("KVM: Add VT-x machine check support")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200414071414.45636-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two types of #AC can be generated in Intel CPUs:
1. legacy alignment check #AC
2. split lock #AC
Reflect #AC back into the guest if the guest has legacy alignment checks
enabled or if split lock detection is disabled.
If the #AC is not a legacy one and split lock detection is enabled, then
invoke handle_guest_split_lock() which will either warn and disable split
lock detection for this task or force SIGBUS on it.
[ tglx: Switch it to handle_guest_split_lock() and rename the misnamed
helper function. ]
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
If KVM wasn't used at all before we crash the cleanup procedure fails with
BUG: unable to handle page fault for address: ffffffffffffffc8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 23215067 P4D 23215067 PUD 23217067 PMD 0
Oops: 0000 [#8] SMP PTI
CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G D 5.6.0-rc2+ #823
RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel]
The root cause is that loaded_vmcss_on_cpu list is not yet initialized,
we initialize it in hardware_enable() but this only happens when we start
a VM.
Previously, we used to have a bitmap with enabled CPUs and that was
preventing [masking] the issue.
Initialized loaded_vmcss_on_cpu list earlier, right before we assign
crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and
blocked_vcpu_on_cpu_lock are moved altogether for consistency.
Fixes: 31603d4fc2 ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If nested events are blocked, don't clear the mtf_pending flag to avoid
missing later delivery of the MTF VM-exit.
Fixes: 5ef8acbdd6 ("KVM: nVMX: Emulate MTF when performing instruction emulation")
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20200406201237.178725-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception trampoline in .fixup section is not needed, the exception
handling code can jump directly to the label in the .text section.
Changes since v1:
- Fix commit message.
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200406202108.74300-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
The commit 842f4be958 ("KVM: VMX: Add a trampoline to fix VMREAD error
handling") removed the declaration of vmread_error() causes a W=1 build
failure with KVM_WERROR=y. Fix it by adding it back.
arch/x86/kvm/vmx/vmx.c:359:17: error: no previous prototype for 'vmread_error' [-Werror=missing-prototypes]
asmlinkage void vmread_error(unsigned long field, bool fault)
^~~~~~~~~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Message-Id: <20200402153955.1695-1-cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull x86 cleanups from Ingo Molnar:
"This topic tree contains more commits than usual:
- most of it are uaccess cleanups/reorganization by Al
- there's a bunch of prototype declaration (--Wmissing-prototypes)
cleanups
- misc other cleanups all around the map"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/mm/set_memory: Fix -Wmissing-prototypes warnings
x86/efi: Add a prototype for efi_arch_mem_reserve()
x86/mm: Mark setup_emu2phys_nid() static
x86/jump_label: Move 'inline' keyword placement
x86/platform/uv: Add a missing prototype for uv_bau_message_interrupt()
kill uaccess_try()
x86: unsafe_put-style macro for sigmask
x86: x32_setup_rt_frame(): consolidate uaccess areas
x86: __setup_rt_frame(): consolidate uaccess areas
x86: __setup_frame(): consolidate uaccess areas
x86: setup_sigcontext(): list user_access_{begin,end}() into callers
x86: get rid of put_user_try in __setup_rt_frame() (both 32bit and 64bit)
x86: ia32_setup_rt_frame(): consolidate uaccess areas
x86: ia32_setup_frame(): consolidate uaccess areas
x86: ia32_setup_sigcontext(): lift user_access_{begin,end}() into the callers
x86/alternatives: Mark text_poke_loc_init() static
x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()
x86/mm: Drop pud_mknotpresent()
x86: Replace setup_irq() by request_irq()
x86/configs: Slightly reduce defconfigs
...
Add a hand coded assembly trampoline to preserve volatile registers
across vmread_error(), and to handle the calling convention differences
between 64-bit and 32-bit due to asmlinkage on vmread_error(). Pass
@field and @fault on the stack when invoking the trampoline to avoid
clobbering volatile registers in the context of the inline assembly.
Calling vmread_error() directly from inline assembly is partially broken
on 64-bit, and completely broken on 32-bit. On 64-bit, it will clobber
%rdi and %rsi (used to pass @field and @fault) and any volatile regs
written by vmread_error(). On 32-bit, asmlinkage means vmread_error()
expects the parameters to be passed on the stack, not via regs.
Opportunistically zero out the result in the trampoline to save a few
bytes of code for every VMREAD. A happy side effect of the trampoline
is that the inline code footprint is reduced by three bytes on 64-bit
due to PUSH/POP being more efficent (in terms of opcode bytes) than MOV.
Fixes: 6e2020977e ("KVM: VMX: Add error handling to VMREAD helper")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200326160712.28803-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tag vmx_x86_ops with __initdata now the the struct is copied by value to
a common x86 instance of kvm_x86_ops as part of kvm_init().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-9-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the __exit annotation from VMX hardware_unsetup(), the hook
can be reached during kvm_init() by way of kvm_arch_hardware_unsetup()
if failure occurs at various points during initialization.
Removing the annotation also lets us annotate vmx_x86_ops and svm_x86_ops
with __initdata; otherwise, objtool complains because it doesn't
understand that the vendor specific __initdata is being copied by value
to a non-__initdata instance.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-8-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the kvm_x86_ops pointer in common x86 with an instance of the
struct to save one pointer dereference when invoking functions. Copy the
struct by value to set the ops during kvm_init().
Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the
ops have been initialized, i.e. a vendor KVM module has been loaded.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure VMX's runtime hooks by modifying vmx_x86_ops directly instead
of using the global kvm_x86_ops. This sets the stage for waiting until
after ->hardware_setup() to set kvm_x86_ops with the vendor's
implementation.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-5-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move VMX's hardware_setup() below its vmx_x86_ops definition so that a
future patch can refactor hardware_setup() to modify vmx_x86_ops
directly instead of indirectly modifying the ops via the global
kvm_x86_ops.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-4-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_x86_ops functions that are used only within the scope of
kvm_init() into a separate struct, kvm_x86_init_ops. In addition to
identifying the init-only functions without restorting to code comments,
this also sets the stage for waiting until after ->hardware_setup() to
set kvm_x86_ops. Setting kvm_x86_ops after ->hardware_setup() is
desirable as many of the hooks are not usable until ->hardware_setup()
completes.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131509.136884777@linutronix.de
There is no reason that this gunk is in a generic header file. The wildcard
defines need to stay as they are required by file2alias.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131508.736205164@linutronix.de
Gracefully handle faults on VMXON, e.g. #GP due to VMX being disabled by
BIOS, instead of letting the fault crash the system. Now that KVM uses
cpufeatures to query support instead of reading MSR_IA32_FEAT_CTL
directly, it's possible for a bug in a different subsystem to cause KVM
to incorrectly attempt VMXON[*]. Crashing the system is especially
annoying if the system is configured such that hardware_enable() will
be triggered during boot.
Oppurtunistically rename @addr to @vmxon_pointer and use a named param
to reference it in the inline assembly.
Print 0xdeadbeef in the ultra-"rare" case that reading MSR_IA32_FEAT_CTL
also faults.
[*] https://lkml.kernel.org/r/20200226231615.13664-1-sean.j.christopherson@intel.com
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-4-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Subsume loaded_vmcs_init() into alloc_loaded_vmcs(), its only remaining
caller, and drop the VMCLEAR on the shadow VMCS, which is guaranteed to
be NULL. loaded_vmcs_init() was previously used by loaded_vmcs_clear(),
but loaded_vmcs_clear() also subsumed loaded_vmcs_init() to properly
handle smp_wmb() with respect to VMCLEAR.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMCLEAR all in-use VMCSes during a crash, even if kdump's NMI shootdown
interrupted a KVM update of the percpu in-use VMCS list.
Because NMIs are not blocked by disabling IRQs, it's possible that
crash_vmclear_local_loaded_vmcss() could be called while the percpu list
of VMCSes is being modified, e.g. in the middle of list_add() in
vmx_vcpu_load_vmcs(). This potential corner case was called out in the
original commit[*], but the analysis of its impact was wrong.
Skipping the VMCLEARs is wrong because it all but guarantees that a
loaded, and therefore cached, VMCS will live across kexec and corrupt
memory in the new kernel. Corruption will occur because the CPU's VMCS
cache is non-coherent, i.e. not snooped, and so the writeback of VMCS
memory on its eviction will overwrite random memory in the new kernel.
The VMCS will live because the NMI shootdown also disables VMX, i.e. the
in-progress VMCLEAR will #UD, and existing Intel CPUs do not flush the
VMCS cache on VMXOFF.
Furthermore, interrupting list_add() and list_del() is safe due to
crash_vmclear_local_loaded_vmcss() using forward iteration. list_add()
ensures the new entry is not visible to forward iteration unless the
entire add completes, via WRITE_ONCE(prev->next, new). A bad "prev"
pointer could be observed if the NMI shootdown interrupted list_del() or
list_add(), but list_for_each_entry() does not consume ->prev.
In addition to removing the temporary disabling of VMCLEAR, open code
loaded_vmcs_init() in __loaded_vmcs_clear() and reorder VMCLEAR so that
the VMCS is deleted from the list only after it's been VMCLEAR'd.
Deleting the VMCS before VMCLEAR would allow a race where the NMI
shootdown could arrive between list_del() and vmcs_clear() and thus
neither flow would execute a successful VMCLEAR. Alternatively, more
code could be moved into loaded_vmcs_init(), but that gets rather silly
as the only other user, alloc_loaded_vmcs(), doesn't need the smp_wmb()
and would need to work around the list_del().
Update the smp_*() comments related to the list manipulation, and
opportunistically reword them to improve clarity.
[*] https://patchwork.kernel.org/patch/1675731/#3720461
Fixes: 8f536b7697 ("KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
THUNK_TARGET defines [thunk_target] as having "rm" input constraints
when CONFIG_RETPOLINE is not set, which isn't constrained enough for
this specific case.
For inline assembly that modifies the stack pointer before using this
input, the underspecification of constraints is dangerous, and results
in an indirect call to a previously pushed flags register.
In this case `entry`'s stack slot is good enough to satisfy the "m"
constraint in "rm", but the inline assembly in
handle_external_interrupt_irqoff() modifies the stack pointer via
push+pushf before using this input, which in this case results in
calling what was the previous state of the flags register, rather than
`entry`.
Be more specific in the constraints by requiring `entry` be in a
register, and not a memory operand.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+3f29ca2efb056a761e38@syzkaller.appspotmail.com
Debugged-by: Alexander Potapenko <glider@google.com>
Debugged-by: Paolo Bonzini <pbonzini@redhat.com>
Debugged-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Message-Id: <20200323191243.30002-1-ndesaulniers@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The name of nested_vmx_exit_reflected suggests that it's purely
a test, but it actually marks VMCS12 pages as dirty. Move this to
vmx_handle_exit, observing that the initial nested_run_pending check in
nested_vmx_exit_reflected is pointless---nested_run_pending has just
been cleared in vmx_vcpu_run and won't be set until handle_vmlaunch
or handle_vmresume.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Registers in "regs" array are indexed as rax/rcx/rdx/.../rsi/rdi/r8/...
Reorder access to "regs" array in vmenter.S to follow its natural order.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_vmx_handle_enlightened_vmptrld() fails in two cases:
- when we fail to kvm_vcpu_map() the supplied GPA
- when revision_id is incorrect.
Genuine Hyper-V raises #UD in the former case (at least with *some*
incorrect GPAs) and does VMfailInvalid() in the later. KVM doesn't do
anything so L1 just gets stuck retrying the same faulty VMLAUNCH.
nested_vmx_handle_enlightened_vmptrld() has two call sites:
nested_vmx_run() and nested_get_vmcs12_pages(). The former needs to queue
do much: the failure there happens after migration when L2 was running (and
L1 did something weird like wrote to VP assist page from a different vCPU),
just kill L1 with KVM_EXIT_INTERNAL_ERROR.
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
[Squash kbuild autopatch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When vmx_set_nested_state() happens, we may not have all the required
data to map enlightened VMCS: e.g. HV_X64_MSR_VP_ASSIST_PAGE MSR may not
yet be restored so we need a postponed action. Currently, we (ab)use
need_vmcs12_to_shadow_sync/nested_sync_vmcs12_to_shadow() for that but
this is not ideal:
- We may not need to sync anything if L2 is running
- It is hard to propagate errors from nested_sync_vmcs12_to_shadow()
as we call it from vmx_prepare_switch_to_guest() which happens just
before we do VMLAUNCH, the code is not ready to handle errors there.
Move eVMCS mapping to nested_get_vmcs12_pages() and request
KVM_REQ_GET_VMCS12_PAGES, it seems to be is less abusive in nature.
It would probably be possible to introduce a specialized KVM_REQ_EVMCS_MAP
but it is undesirable to propagate eVMCS specifics all the way up to x86.c
Note, we don't need to request KVM_REQ_GET_VMCS12_PAGES from
vmx_set_nested_state() directly as nested_vmx_enter_non_root_mode() already
does that. Requesting KVM_REQ_GET_VMCS12_PAGES is done to document the
(non-obvious) side-effect and to be future proof.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 5ef8acbdd6 ("KVM: nVMX: Emulate MTF when performing
instruction emulation") introduced a helper to check the MTF
VM-execution control in vmcs12. Change pre-existing check in
nested_vmx_exit_reflected() to instead use the helper.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PMU is not exposed to guest by most of products from cloud providers since the
bad performance of PMU emulation and security concern. However, it calls
perf_guest_switch_get_msrs() and clear_atomic_switch_msr() unconditionally
even if PMU is not exposed to the guest before each vmentry.
~2% vmexit time reduced can be observed by kvm-unit-tests/vmexit.flat on my
SKX server.
Before patch:
vmcall 1559
After patch:
vmcall 1529
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The set_cr3 callback is not setting the guest CR3, it is setting the
root of the guest page tables, either shadow or two-dimensional.
To make this clearer as well as to indicate that the MMU calls it
via kvm_mmu_load_cr3, rename it to load_mmu_pgd.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to what kvm-intel.ko is doing, provide a single callback that
merges svm_set_cr3, set_tdp_cr3 and nested_svm_set_tdp_cr3.
This lets us unify the set_cr3 and set_tdp_cr3 entries in kvm_x86_ops.
I'm doing that in this same patch because splitting it adds quite a bit
of churn due to the need for forward declarations. For the same reason
the assignment to vcpu->arch.mmu->set_cr3 is moved to kvm_init_shadow_mmu
from init_kvm_softmmu and nested_svm_init_mmu_context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current CPUID 0xd enumeration code does not support supervisor
states, because KVM only supports setting IA32_XSS to zero.
Change it instead to use a new variable supported_xss, to be
set from the hardware_setup callback which is in charge of CPU
capabilities.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle CPUID 0x8000000A in the main switch in __do_cpuid_func() and drop
->set_supported_cpuid() now that both VMX and SVM implementations are
empty. Like leaf 0x14 (Intel PT) and leaf 0x8000001F (SEV), leaf
0x8000000A is is (obviously) vendor specific but can be queried in
common code while respecting SVM's wishes by querying kvm_cpu_cap_has().
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move host_efer to common x86 code and use it for CPUID's is_efer_nx() to
avoid constantly re-reading the MSR.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop propagating MMU large page support into a memslot's disallow_lpage
now that the MMU's max_page_level handles the scenario where VMX's EPT is
enabled and EPT doesn't support 2M pages.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure the max page level during hardware setup to avoid a retpoline
in the page fault handler. Drop ->get_lpage_level() as the page fault
handler was the last user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Combine kvm_enable_tdp() and kvm_disable_tdp() into a single function,
kvm_configure_mmu(), in preparation for doing additional configuration
during hardware setup. And because having separate helpers is silly.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vmx_pt_mode_is_host_guest() in intel_pmu_refresh() instead of
bouncing through kvm_x86_ops->pt_supported, and remove ->pt_supported()
as the PMU code was the last remaining user.
Opportunistically clean up the wording of a comment that referenced
kvm_x86_ops->pt_supported().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use cpu_has_vmx_rdtscp() directly when computing secondary exec controls
and drop the now defunct vmx_rdtscp_supported().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for MSR_TSC_AUX virtualization via kvm_cpu_cap_has() and drop
->rdtscp_supported().
Note, vmx_rdtscp_supported() needs to hang around a tiny bit longer due
other usage in VMX code.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set emulated and transmuted (set based on other features) feature bits
via kvm_cpu_caps now that the CPUID output for KVM_GET_SUPPORTED_CPUID
is direcly overidden with kvm_cpu_caps.
Note, VMX emulation of UMIP already sets kvm_cpu_caps.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Override CPUID entries with kvm_cpu_caps during KVM_GET_SUPPORTED_CPUID
instead of masking the host CPUID result, which is redundant now that
the host CPUID is incorporated into kvm_cpu_caps at runtime.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set UMIP in kvm_cpu_caps when it is emulated by VMX, even though the
bit will effectively be dropped by do_host_cpuid(). This allows
checking for UMIP emulation via kvm_cpu_caps instead of a dedicated
kvm_x86_ops callback.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper, kvm_cpu_cap_check_and_set(), to query boot_cpu_has() as
part of setting a KVM cpu capability. VMX in particular has a number of
features that are dependent on both a VMCS capability and kernel
support.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the clearing of the XSAVES CPUID bit into VMX, which has a separate
VMCS control to enable XSAVES in non-root, to eliminate the last ugly
renmant of the undesirable "unsigned f_* = *_supported ? F(*) : 0"
pattern in the common CPUID handling code.
Drop ->xsaves_supported(), CPUID adjustment was the only user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced KVM CPU caps to propagate VMX-only (kernel)
settings to supported CPUID flags.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the CPUID masks for KVM_GET_SUPPORTED_CPUID at load time using
what is effectively a KVM-adjusted copy of boot_cpu_data, or more
precisely, the x86_capability array in boot_cpu_data.
In terms of KVM support, the vast majority of CPUID feature bits are
constant, and *all* feature support is known at KVM load time. Rather
than apply boot_cpu_data, which is effectively read-only after init,
at runtime, copy it into a KVM-specific array and use *that* to mask
CPUID registers.
In additional to consolidating the masking, kvm_cpu_caps can be adjusted
by SVM/VMX at load time and thus eliminate all feature bit manipulation
in ->set_supported_cpuid().
Opportunistically clean up a few warts:
- Replace bare "unsigned" with "unsigned int" when a feature flag is
captured in a local variable, e.g. f_nx.
- Sort the CPUID masks by function, index and register (alphabetically
for registers, i.e. EBX comes before ECX/EDX).
- Remove the superfluous /* cpuid 7.0.ecx */ comments.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Call kvm_set_cpu_caps from kvm_x86_ops->hardware_setup due to fixed
GBPAGES patch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the Processor Trace CPUID adjustment into VMX code to eliminate
an instance of the undesirable "unsigned f_* = *_supported ? F(*) : 0"
pattern in the common CPUID handling code, and to pave the way toward
eventually removing ->pt_supported().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the clearing of the RDTSCP CPUID bit into VMX, which has a separate
VMCS control to enable RDTSCP in non-root, to eliminate an instance of
the undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in the
common CPUID handling code. Drop ->rdtscp_supported() since CPUID
adjustment was the last remaining user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the setting of the PKU CPUID bit into VMX to eliminate an instance
of the undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in
the common CPUID handling code. Drop ->pku_supported(), CPUID
adjustment was the only user.
Note, some AMD CPUs now support PKU, but SVM doesn't yet support
exposing it to a guest.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the CPUID adjustment for UMIP emulation into VMX code to eliminate
an instance of the undesirable "unsigned f_* = *_supported ? F(*) : 0"
pattern in the common CPUID handling code.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the INVPCID CPUID adjustments into VMX to eliminate an instance of
the undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in the
common CPUID handling code. Drop ->invpcid_supported(), CPUID
adjustment was the only user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the MPX CPUID adjustments into VMX to eliminate an instance of the
undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in the
common CPUID handling code.
Note, to maintain existing behavior, VMX must manually check for kernel
support for MPX by querying boot_cpu_has(X86_FEATURE_MPX). Previously,
do_cpuid_7_mask() masked MPX based on boot_cpu_data by invoking
cpuid_mask() on the associated cpufeatures word, but cpuid_mask() runs
prior to executing vmx_set_supported_cpuid().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the explicit @func param from ->set_supported_cpuid() and instead
pull the CPUID function from the relevant entry. This sets the stage
for hardening guest CPUID updates in future patches, e.g. allows adding
run-time assertions that the CPUID feature being changed is actually
a bit in the referenced CPUID entry.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Query supported_xcr0 when checking for MPX support instead of invoking
->mpx_supported() and drop ->mpx_supported() as kvm_mpx_supported() was
its last user. Rename vmx_mpx_supported() to cpu_has_vmx_mpx() to
better align with VMX/VMCS nomenclature.
Modify VMX's adjustment of xcr0 to call cpus_has_vmx_mpx() (renamed from
vmx_mpx_supported()) directly to avoid reading supported_xcr0 before
it's fully configured.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Test that *all* bits are set. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new global variable, supported_xcr0, to track which xcr0 bits can
be exposed to the guest instead of calculating the mask on every call.
The supported bits are constant for a given instance of KVM.
This paves the way toward eliminating the ->mpx_supported() call in
kvm_mpx_supported(), e.g. eliminates multiple retpolines in VMX's nested
VM-Enter path, and eventually toward eliminating ->mpx_supported()
altogether.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to query which of the (two) supported PT modes is active.
The primary motivation is to help document that there is a third PT mode
(host-only) that's currently not supported by KVM. As is, it's not
obvious that PT_MODE_SYSTEM != !PT_MODE_HOST_GUEST and vice versa, e.g.
that "pt_mode == PT_MODE_SYSTEM" and "pt_mode != PT_MODE_HOST_GUEST" are
two distinct checks.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly pass an exception struct when checking for intercept from
the emulator, which eliminates the last reference to arch.emulate_ctxt
in vendor specific code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the call to cpu_has_vmx_ept_execute_only() when calculating which
EPT capabilities will be exposed to L1 for nested EPT. The resulting
configuration is immediately sanitized by the passed in @ept_caps, and
except for the call from vmx_check_processor_compat(), @ept_caps is the
capabilities that are queried by cpu_has_vmx_ept_execute_only(). For
vmx_check_processor_compat(), KVM *wants* to ignore vmx_capability.ept
so that a divergence in EPT capabilities between CPUs is detected.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_mmu->get_cr3() to call out that it is retrieving a guest
value, as opposed to kvm_mmu->set_cr3(), which sets a host value, and to
note that it will return something other than CR3 when nested EPT is in
use. Hopefully the new name will also make it more obvious that L1's
nested_cr3 is returned in SVM's nested NPT case.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename valid_ept_address() to nested_vmx_check_eptp() to follow the nVMX
nomenclature and to reflect that the function now checks a lot more than
just the address contained in the EPTP. Rename address to new_eptp in
associated code.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the accessor for vmcs12.EPTP to use "eptp" instead of "cr3". The
accessor has no relation to cr3 whatsoever, other than it being assigned
to the also poorly named kvm_mmu->get_cr3() hook.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for 5-level nested EPT, and advertise said support in the
EPT capabilities MSR. KVM's MMU can already handle 5-level legacy page
tables, there's no reason to force an L1 VMM to use shadow paging if it
wants to employ 5-level page tables.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return true for vmx_interrupt_allowed() if the vCPU is in L2 and L1 has
external interrupt exiting enabled. IRQs are never blocked in hardware
if the CPU is in the guest (L2 from L1's perspective) when IRQs trigger
VM-Exit.
The new check percolates up to kvm_vcpu_ready_for_interrupt_injection()
and thus vcpu_run(), and so KVM will exit to userspace if userspace has
requested an interrupt window (to inject an IRQ into L1).
Remove the @external_intr param from vmx_check_nested_events(), which is
actually an indicator that userspace wants an interrupt window, e.g.
it's named @req_int_win further up the stack. Injecting a VM-Exit into
L1 to try and bounce out to L0 userspace is all kinds of broken and is
no longer necessary.
Remove the hack in nested_vmx_vmexit() that attempted to workaround the
breakage in vmx_check_nested_events() by only filling interrupt info if
there's an actual interrupt pending. The hack actually made things
worse because it caused KVM to _never_ fill interrupt info when the
LAPIC resides in userspace (kvm_cpu_has_interrupt() queries
interrupt.injected, which is always cleared by prepare_vmcs12() before
reaching the hack in nested_vmx_vmexit()).
Fixes: 6550c4df7e ("KVM: nVMX: Fix interrupt window request with "Acknowledge interrupt on exit"")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove some obsolete comments, fix wrong function name and description.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It could take kvm->mmu_lock for an extended period of time when
enabling dirty log for the first time. The main cost is to clear
all the D-bits of last level SPTEs. This situation can benefit from
manual dirty log protect as well, which can reduce the mmu_lock
time taken. The sequence is like this:
1. Initialize all the bits of the dirty bitmap to 1 when enabling
dirty log for the first time
2. Only write protect the huge pages
3. KVM_GET_DIRTY_LOG returns the dirty bitmap info
4. KVM_CLEAR_DIRTY_LOG will clear D-bit for each of the leaf level
SPTEs gradually in small chunks
Under the Intel(R) Xeon(R) Gold 6152 CPU @ 2.10GHz environment,
I did some tests with a 128G windows VM and counted the time taken
of memory_global_dirty_log_start, here is the numbers:
VM Size Before After optimization
128G 460ms 10ms
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the VM allocation and free code to common x86 as the logic is
more or less identical across SVM and VMX.
Note, although hyperv.hv_pa_pg is part of the common kvm->arch, it's
(currently) only allocated by VMX VMs. But, since kfree() plays nice
when passed a NULL pointer, the superfluous call for SVM is harmless
and avoids future churn if SVM gains support for HyperV's direct TLB
flush.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
[Make vm_size a field instead of a function. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Directly return the __vmalloc() result in {svm,vmx}_vm_alloc() to pave
the way for handling VM alloc/free in common x86 code, and to obviate
the need to check the result of __vmalloc() in vendor specific code.
Add a build-time assertion to ensure each structs' "kvm" field stays at
offset 0, which allows interpreting a "struct kvm_{svm,vmx}" as a
"struct kvm".
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check the result of __vmalloc() to avoid dereferencing a NULL pointer in
the event that allocation failres.
Fixes: d1e5b0e98e ("kvm: Make VM ioctl do valloc for some archs")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sample_period of a counter tracks when that counter will
overflow and set global status/trigger a PMI. However this currently
only gets set when the initial counter is created or when a counter is
resumed; this updates the sample period after a wrmsr so running
counters will accurately reflect their new value.
Signed-off-by: Eric Hankland <ehankland@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Each if branch in handle_external_interrupt_irqoff() is mutually
exclusive. Add 'else' to make it clear and also avoid some unnecessary
check.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use %u to print u32 var and correct some coding style.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Better reflect the structure of the code and metion why we could not
always honor the guest.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter
with EVMCS GPA = 0 the host crashes because the
evmcs_gpa != vmx->nested.hv_evmcs_vmptr
condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to
false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will
happen on vmx->nested.hv_evmcs pointer dereference.
Another problematic EVMCS ptr value is '-1' but it only causes host crash
after nested_release_evmcs() invocation. The problem is exactly the same as
with '0', we mistakenly think that the EVMCS pointer hasn't changed and
thus nested.hv_evmcs_vmptr is valid.
Resolve the issue by adding an additional !vmx->nested.hv_evmcs
check to nested_vmx_handle_enlightened_vmptrld(), this way we will
always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL
and this is supposed to catch all invalid EVMCS GPAs.
Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs()
to be consistent with initialization where we don't currently
set hv_evmcs_vmptr to '-1'.
Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if
the CPU supports SGX1. Per Intel's SDM, all ENCLS leafs #UD if SGX1
is not supported[*], i.e. intercepting ENCLS to inject a #UD is
unnecessary.
Avoiding ENCLS-exiting even when it is reported as supported by the CPU
works around a reported issue where SGX is "hard" disabled after an S3
suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control
are enumerated as unsupported. While the root cause of the S3 issue is
unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a
workaround for what is most likely a hardware or firmware issue. As a
bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and
vmcs02.
Note, SGX must be disabled in BIOS to take advantage of this workaround
[*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be
globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are
cleared. Soft disabled meaning disabling SGX without clearing the
primary CPUID bit (in leaf 0x7) and without poking into non-SGX
CPU paths, e.g. for the VMCS controls.
Fixes: 0b665d3040 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest")
Reported-by: Toni Spets <toni.spets@iki.fi>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.
Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.
Fixes: 07721feee4 ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compile error with CONFIG_KVM_INTEL=y and W=1:
CC arch/x86/kvm/vmx/vmx.o
arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=]
68 | static const struct x86_cpu_id vmx_cpu_id[] = {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a
reference to the structure (or any code at all). This makes W=1 compiles
unhappy.
Wrap both in a #ifdef to avoid the issue.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
[Do the same for CONFIG_KVM_AMD. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution
controls when checking instruction interception. If the 'use IO bitmaps'
VM-execution control is 1, check the instruction access against the IO
bitmaps to determine if the instruction causes a VM-exit.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Checks against the IO bitmap are useful for both instruction emulation
and VM-exit reflection. Refactor the IO bitmap checks into a helper
function.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_check_intercept is not yet fully implemented. To avoid emulating
instructions disallowed by the L1 hypervisor, refuse to emulate
instructions by default.
Cc: stable@vger.kernel.org
[Made commit, added commit msg - Oliver]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 5f3d45e7f2 ("kvm/x86: add support for
MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap
flag processor-based execution control for its L2 guest. KVM simply
forwards any MTF VM-exits to the L1 guest, which works for normal
instruction execution.
However, when KVM needs to emulate an instruction on the behalf of an L2
guest, the monitor trap flag is not emulated. Add the necessary logic to
kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon
instruction emulation for L2.
Fixes: 5f3d45e7f2 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When apicv is disabled on a vCPU (e.g. by enabling KVM_CAP_HYPERV_SYNIC*),
nothing happens to VMX MSRs on the already existing vCPUs, however, all new
ones are created with PIN_BASED_POSTED_INTR filtered out. This is very
confusing and results in the following picture inside the guest:
$ rdmsr -ax 0x48d
ff00000016
7f00000016
7f00000016
7f00000016
This is observed with QEMU and 4-vCPU guest: QEMU creates vCPU0, does
KVM_CAP_HYPERV_SYNIC2 and then creates the remaining three.
L1 hypervisor may only check CPU0's controls to find out what features
are available and it will be very confused later. Switch to setting
PIN_BASED_POSTED_INTR control based on global 'enable_apicv' setting.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even when APICv is disabled for L1 it can (and, actually, is) still
available for L2, this means we need to always call
vmx_deliver_nested_posted_interrupt() when attempting an interrupt
delivery.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the duration of mapping eVMCS, it derefences ->memslots without holding
->srcu or ->slots_lock when accessing hv assist page. This patch fixes it by
moving nested_sync_vmcs12_to_shadow to prepare_guest_switch, where the SRCU
is already taken.
It can be reproduced by running kvm's evmcs_test selftest.
=============================
warning: suspicious rcu usage
5.6.0-rc1+ #53 tainted: g w ioe
-----------------------------
./include/linux/kvm_host.h:623 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by evmcs_test/8507:
#0: ffff9ddd156d00d0 (&vcpu->mutex){+.+.}, at:
kvm_vcpu_ioctl+0x85/0x680 [kvm]
stack backtrace:
cpu: 6 pid: 8507 comm: evmcs_test tainted: g w ioe 5.6.0-rc1+ #53
hardware name: dell inc. optiplex 7040/0jctf8, bios 1.4.9 09/12/2016
call trace:
dump_stack+0x68/0x9b
kvm_read_guest_cached+0x11d/0x150 [kvm]
kvm_hv_get_assist_page+0x33/0x40 [kvm]
nested_enlightened_vmentry+0x2c/0x60 [kvm_intel]
nested_vmx_handle_enlightened_vmptrld.part.52+0x32/0x1c0 [kvm_intel]
nested_sync_vmcs12_to_shadow+0x439/0x680 [kvm_intel]
vmx_vcpu_run+0x67a/0xe60 [kvm_intel]
vcpu_enter_guest+0x35e/0x1bc0 [kvm]
kvm_arch_vcpu_ioctl_run+0x40b/0x670 [kvm]
kvm_vcpu_ioctl+0x370/0x680 [kvm]
ksys_ioctl+0x235/0x850
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x77/0x780
entry_syscall_64_after_hwframe+0x49/0xbe
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix wrong variable names and grammar error in comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU
currently also hardcodes the page walk level for nested EPT to be 4
levels. The L2 guest is all but guaranteed to soft hang on its first
instruction when L1 is using EPT, as KVM will construct 4-level page
tables and then tell hardware to use 5-level page tables.
Fixes: 855feb6736 ("KVM: MMU: Add 5 level EPT & Shadow page table support.")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix some typos in the comments. Also fix coding style.
[Sean Christopherson rewrites the comment of write_fault_to_shadow_pgtable
field in struct kvm_vcpu_arch.]
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SDM 27.3.4 states that the 'pending debug exceptions' VMCS field will
be populated if a VM-exit caused by an INIT signal takes priority over a
debug-trap. Emulate this behavior when synthesizing an INIT signal
VM-exit into L1.
Fixes: 4b9852f4f3 ("KVM: x86: Fix INIT signal handling in various CPU states")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not initialize the microcode version at RESET or INIT, only on vCPU
creation. Microcode updates are not lost during INIT, and exact
behavior across a warm RESET is not specified by the architecture.
Since we do not support a microcode update directly from the hypervisor,
but only as a result of userspace setting the microcode version MSR,
it's simpler for userspace if we do nothing in KVM and let userspace
emulate behavior for RESET as it sees fit.
Userspace can tie the fix to the availability of MSR_IA32_UCODE_REV in
the list of emulated MSRs.
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function vmx_decache_cr0_guest_bits() is only called below its
implementation. So this is meaningless and should be removed.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Correct the logic in intel_pmu_set_msr() for fixed and general purpose
counters. This was recently changed to set pmc->counter without taking
in to account the value of pmc_read_counter() which will be incorrect if
the counter is currently running and non-zero; this changes back to the
old logic which accounted for the value of currently running counters.
Signed-off-by: Eric Hankland <ehankland@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sane L1 hypervisors are not supposed to turn any of the unsupported VMX
controls on for its guests and nested_vmx_check_controls() checks for
that. This is, however, not the case for the controls which are supported
on the host but are missing in enlightened VMCS and when eVMCS is in use.
It would certainly be possible to add these missing checks to
nested_check_vm_execution_controls()/_vm_exit_controls()/.. but it seems
preferable to keep eVMCS-specific stuff in eVMCS and reduce the impact on
non-eVMCS guests by doing less unrelated checks. Create a separate
nested_evmcs_check_controls() for this purpose.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With fine grained VMX feature enablement QEMU>=4.2 tries to do KVM_SET_MSRS
with default (matching CPU model) values and in case eVMCS is also enabled,
fails.
It would be possible to drop VMX feature filtering completely and make
this a guest's responsibility: if it decides to use eVMCS it should know
which fields are available and which are not. Hyper-V mostly complies to
this, however, there are some problematic controls:
SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES
VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL
which Hyper-V enables. As there are no corresponding fields in eVMCS, we
can't handle this properly in KVM. This is a Hyper-V issue.
Move VMX controls sanitization from nested_enable_evmcs() to vmx_get_msr(),
and do the bare minimum (only clear controls which are known to cause issues).
This allows userspace to keep setting controls it wants and at the same
time hides them from the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The blurb pertaining to the return value of nested_vmx_load_cr3() no
longer matches reality, remove it entirely as the behavior it is
attempting to document is quite obvious when reading the actual code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function nested_vmx_run() declaration is below its implementation. So
this is meaningless and should be removed.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since disabling APICv has to be done for all vcpus on AMD-based
system, adopt the newly introduced kvm_request_apicv_update()
interface, and introduce a new APICV_INHIBIT_REASON_HYPERV.
Also, remove the kvm_vcpu_deactivate_apicv() since no longer used.
Cc: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inibit reason bits are used to determine if APICv deactivation is
applicable for a particular hardware virtualization architecture.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several reasons in which a VM needs to deactivate APICv
e.g. disable APICv via parameter during module loading, or when
enable Hyper-V SynIC support. Additional inhibit reasons will be
introduced later on when dynamic APICv is supported,
Introduce KVM APICv inhibit reason bits along with a new variable,
apicv_inhibit_reasons, to help keep track of APICv state for each VM,
Initially, the APICV_INHIBIT_REASON_DISABLE bit is used to indicate
the case where APICv is disabled during KVM module load.
(e.g. insmod kvm_amd avic=0 or insmod kvm_intel enable_apicv=0).
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Do not use get_enable_apicv; consider irqchip_split in svm.c. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PPC: Bugfixes
x86:
* Support for mapping DAX areas with large nested page table entries.
* Cleanups and bugfixes here too. A particularly important one is
a fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to exploit
the guest kernel, for which the embargo expired today.
* Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
* Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling hyperthread
to read it), which unfortunately is an even bigger whack-a-mole game
than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large refactoring
of vCPU creation that affects all architectures but should not have any
visible effect.
s390 will come next week together with some more x86 patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeMxtCAAoJEL/70l94x66DQxIIAJv9hMmXLQHGFnUMskjGErR6
DCLSC0YRdRMwE50CerblyJtGsMwGsPyHZwvZxoAceKJ9w0Yay9cyaoJ87ItBgHoY
ce0HrqIUYqRSJ/F8WH2lSzkzMBr839rcmqw8p1tt4D5DIsYnxHGWwRaaP+5M/1KQ
YKFu3Hea4L00U339iIuDkuA+xgz92LIbsn38svv5fxHhPAyWza0rDEYHNgzMKuoF
IakLf5+RrBFAh6ZuhYWQQ44uxjb+uQa9pVmcqYzzTd5t1g4PV5uXtlJKesHoAvik
Eba8IEUJn+HgQJjhp3YxQYuLeWOwRF3bwOiZ578MlJ4OPfYXMtbdlqCQANHOcGk=
=H/q1
-----END PGP SIGNATURE-----
Merge tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"This is the first batch of KVM changes.
ARM:
- cleanups and corner case fixes.
PPC:
- Bugfixes
x86:
- Support for mapping DAX areas with large nested page table entries.
- Cleanups and bugfixes here too. A particularly important one is a
fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to
exploit the guest kernel, for which the embargo expired today.
- Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
- Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling
hyperthread to read it), which unfortunately is an even bigger
whack-a-mole game than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large
refactoring of vCPU creation that affects all architectures but should
not have any visible effect.
s390 will come next week together with some more x86 patches"
* tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
x86/KVM: Clean up host's steal time structure
x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed
x86/kvm: Cache gfn to pfn translation
x86/kvm: Introduce kvm_(un)map_gfn()
x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit
KVM: PPC: Book3S PR: Fix -Werror=return-type build failure
KVM: PPC: Book3S HV: Release lock on page-out failure path
KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer
KVM: arm64: pmu: Only handle supported event counters
KVM: arm64: pmu: Fix chained SW_INCR counters
KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled
KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset
KVM: x86: Use a typedef for fastop functions
KVM: X86: Add 'else' to unify fastop and execute call path
KVM: x86: inline memslot_valid_for_gpte
KVM: x86/mmu: Use huge pages for DAX-backed files
KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte()
KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust()
KVM: x86/mmu: Zap any compound page when collapsing sptes
KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch)
...
vmx_set_segment() clears segment cache unconditionally, so we should not
clear it again by calling vmx_segment_cache_clear().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to section "Checks on Guest Control Registers, Debug Registers, and
and MSRs" in Intel SDM vol 3C, the following checks are performed on vmentry
of nested guests:
If the "load debug controls" VM-entry control is 1, bits 63:32 in the DR7
field must be 0.
In KVM, GUEST_DR7 is set prior to the vmcs02 VM-entry by kvm_set_dr() and the
latter synthesizes a #GP if any bit in the high dword in the former is set.
Hence this field needs to be checked in software.
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The helper x86_set_memory_region() is only used in vmx_set_tss_addr()
and kvm_arch_destroy_vm(). Push the lock upper in both cases. With
that, drop x86_set_memory_region().
This prepares to allow __x86_set_memory_region() to return a HVA
mapped, because the HVA will need to be protected by the lock too even
after __x86_set_memory_region() returns.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In nested_enable_evmcs() evmcs_already_enabled check doesn't really do
anything: controls are already sanitized and we return '0' regardless.
Just drop the check.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the CONFIG_X86_64 condition from the low level non-canonical
helpers to effectively enable non-canonical checks on 32-bit KVM.
Non-canonical checks are performed by hardware if the CPU *supports*
64-bit mode, whether or not the CPU is actually in 64-bit mode is
irrelevant.
For the most part, skipping non-canonical checks on 32-bit KVM is ok-ish
because 32-bit KVM always (hopefully) drops bits 63:32 of whatever value
it's checking before propagating it to hardware, and architecturally,
the expected behavior for the guest is a bit of a grey area since the
vCPU itself doesn't support 64-bit mode. I.e. a 32-bit KVM guest can
observe the missed checks in several paths, e.g. INVVPID and VM-Enter,
but it's debatable whether or not the missed checks constitute a bug
because technically the vCPU doesn't support 64-bit mode.
The primary motivation for enabling the non-canonical checks is defense
in depth. As mentioned above, a guest can trigger a missed check via
INVVPID or VM-Enter. INVVPID is straightforward as it takes a 64-bit
virtual address as part of its 128-bit INVVPID descriptor and fails if
the address is non-canonical, even if INVVPID is executed in 32-bit PM.
Nested VM-Enter is a bit more convoluted as it requires the guest to
write natural width VMCS fields via memory accesses and then VMPTRLD the
VMCS, but it's still possible. In both cases, KVM is saved from a true
bug only because its flows that propagate values to hardware (correctly)
take "unsigned long" parameters and so drop bits 63:32 of the bad value.
Explicitly performing the non-canonical checks makes it less likely that
a bad value will be propagated to hardware, e.g. in the INVVPID case,
if __invvpid() didn't implicitly drop bits 63:32 then KVM would BUG() on
the resulting unexpected INVVPID failure due to hardware rejecting the
non-canonical address.
The only downside to enabling the non-canonical checks is that it adds a
relatively small amount of overhead, but the affected flows are not hot
paths, i.e. the overhead is negligible.
Note, KVM technically could gate the non-canonical checks on 32-bit KVM
with static_cpu_has(X86_FEATURE_LM), but on bare metal that's an even
bigger waste of code for everyone except the 0.00000000000001% of the
population running on Yonah, and nested 32-bit on 64-bit already fudges
things with respect to 64-bit CPU behavior.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Also do so in nested_vmx_check_host_state as reported by Krish. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Writes to MSR_CORE_PERF_GLOBAL_CONTROL should never fail if the VM-exit
and VM-entry controls are exposed to L1. Promote the checks to perform a
full WARN if kvm_set_msr() fails and remove the now unused macro
SET_MSR_OR_WARN().
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes Spectre-v1/L1TF vulnerabilities in intel_find_fixed_event()
and intel_rdpmc_ecx_to_pmc().
kvm_rdpmc() (ancestor of intel_find_fixed_event()) and
reprogram_fixed_counter() (ancestor of intel_rdpmc_ecx_to_pmc()) are
exported symbols so KVM should treat them conservatively from a security
perspective.
Fixes: 25462f7f52 ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in vmx_handle_exit().
While exit_reason is set by the hardware and therefore should not be
attacker-influenced, an unknown exit_reason could potentially be used to
perform such an attack.
Fixes: 55d2375e58 ("KVM: nVMX: Move nested code to dedicated files")
Signed-off-by: Marios Pomonis <pomonis@google.com>
Signed-off-by: Nick Finco <nifi@google.com>
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current SVM implementation does not have support for handling PKU. Guests
running on a host with future AMD cpus that support the feature will read
garbage from the PKRU register and will hit segmentation faults on boot as
memory is getting marked as protected that should not be. Ensure that cpuid
from SVM does not advertise the feature.
Signed-off-by: John Allen <john.allen@amd.com>
Cc: stable@vger.kernel.org
Fixes: 0556cbdc2f ("x86/pkeys: Don't check if PKRU is zero before writing it")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_cpu_{un}init() calls to common x86 code as an intermediate
step to removing kvm_cpu_{un}init() altogether.
Note, VMX'x alloc_apic_access_page() and init_rmode_identity_map() are
per-VM allocations and are intentionally kept if vCPU creation fails.
They are freed by kvm_arch_destroy_vm().
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The allocation of FPU structs is identical across VMX and SVM, move it
to common x86 code. Somewhat arbitrarily place the allocation so that
it resides directly above the associated initialization via fx_init(),
e.g. instead of retaining its position with respect to the overall vcpu
creation flow. Although the names names kvm_arch_vcpu_create() and
kvm_arch_vcpu_init() might suggest otherwise, x86 does not have a clean
split between 'create' and 'init'. Allocating the struct immediately
prior to the first use arguably improves readability *now*, and will
yield even bigger improvements when kvm_arch_vcpu_init() is removed in
a future patch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move allocation of VMX and SVM vcpus to common x86. Although the struct
being allocated is technically a VMX/SVM struct, it can be interpreted
directly as a 'struct kvm_vcpu' because of the pre-existing requirement
that 'struct kvm_vcpu' be located at offset zero of the arch/vendor vcpu
struct.
Remove the message from the build-time assertions regarding placement of
the struct, as compatibility with the arch usercopy region is no longer
the sole dependent on 'struct kvm_vcpu' being at offset zero.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture the vcpu pointer in a local varaible and replace '&vmx->vcpu'
references with a direct reference to the pointer in anticipation of
moving bits of the code to common x86 and passing the vcpu pointer into
vmx_create_vcpu(), i.e. eliminate unnecessary noise from future patches.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do VPID allocation after calling the common kvm_vcpu_init() as a step
towards doing vCPU allocation (via kmem_cache_zalloc()) and calling
kvm_vcpu_init() back-to-back. Squishing allocation and initialization
together will eventually allow the sequence to be moved to arch-agnostic
creation code.
Note, the VPID is not consumed until KVM_RUN, slightly delaying its
allocation should have no real function impact. VPID allocation was
arbitrarily placed in the original patch, commit 2384d2b326 ("KVM:
VMX: Enable Virtual Processor Identification (VPID)").
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the guest is configured to have SPEC_CTRL but the host does not
(which is a nonsensical configuration but these are not explicitly
forbidden) then a host-initiated MSR write can write vmx->spec_ctrl
(respectively svm->spec_ctrl) and trigger a #GP when KVM tries to
restore the host value of the MSR. Add a more comprehensive check
for valid bits of SPEC_CTRL, covering host CPUID flags and,
since we are at it and it is more correct that way, guest CPUID
flags too.
For AMD, remove the unnecessary is_guest_mode check around setting
the MSR interception bitmap, so that the code looks the same as
for Intel.
Cc: Jim Mattson <jmattson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case writing to vmread destination operand result in a #PF, vmread
should not call nested_vmx_succeed() to set rflags to specify success.
Similar to as done in VMPTRST (See handle_vmptrst()).
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function nested_vmx_prepare_msr_bitmap() declaration is below its
implementation. So this is meaningless and should be removed.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename bit() to __feature_bit() to give it a more descriptive name, and
add a macro, feature_bit(), to stuff the X68_FEATURE_ prefix to keep
line lengths manageable for code that hardcodes the bit to be retrieved.
No functional change intended.
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that KVM prevents setting host-reserved CR4 bits, drop the dedicated
XSAVE check in guest_cpuid_has() in favor of open coding similar checks
in the SVM/VMX XSAVES enabling flows.
Note, checking boot_cpu_has(X86_FEATURE_XSAVE) in the XSAVES flows is
technically redundant with respect to the CR4 reserved bit checks, e.g.
XSAVES #UDs if CR4.OSXSAVE=0 and arch.xsaves_enabled is consumed if and
only if CR4.OXSAVE=1 in guest. Keep (add?) the explicit boot_cpu_has()
checks to help document KVM's usage of arch.xsaves_enabled.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
