Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
This series adds reporting of the page table order from hmm_range_fault()
and some optimization of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault(). This
makes it easier to establish a large/huge/etc mapping in the device's
page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages. For instance migrating
pages to a device does not require the device to invalidate pages
already in the device.
- Update nouveau and hmm_tests to use the above
-----BEGIN PGP SIGNATURE-----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=omAU
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"Ralph has been working on nouveau's use of hmm_range_fault() and
migrate_vma() which resulted in this small series. It adds reporting
of the page table order from hmm_range_fault() and some optimization
of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault().
This makes it easier to establish a large/huge/etc mapping in the
device's page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages.
For instance migrating pages to a device does not require the
device to invalidate pages already in the device.
- Update nouveau and hmm_tests to use the above"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm/test: use the new migration invalidation
nouveau/svm: use the new migration invalidation
mm/notifier: add migration invalidation type
mm/migrate: add a flags parameter to migrate_vma
nouveau: fix storing invalid ptes
nouveau/hmm: support mapping large sysmem pages
nouveau: fix mapping 2MB sysmem pages
nouveau/hmm: fault one page at a time
mm/hmm: add tests for hmm_pfn_to_map_order()
mm/hmm: provide the page mapping order in hmm_range_fault()
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=90UK
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
* tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: cleanup dma_alloc_contiguous
dma-debug: use named initializers for dir2name
powerpc: use the generic dma_ops_bypass mode
dma-mapping: add a dma_ops_bypass flag to struct device
dma-mapping: make support for dma ops optional
dma-mapping: inline the fast path dma-direct calls
dma-mapping: move the remaining DMA API calls out of line
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXygcpgAKCRCRxhvAZXjc
ogPeAQDv1ncqtNroFAC4pJ4tQhH7JSjW0OltiMk/AocY/J2SdQD9GJ15luYJ0/om
697q/Z68sndRynhdoZlMuf3oYuBlHQw=
=3ZhE
-----END PGP SIGNATURE-----
Merge tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull close_range() implementation from Christian Brauner:
"This adds the close_range() syscall. It allows to efficiently close a
range of file descriptors up to all file descriptors of a calling
task.
This is coordinated with the FreeBSD folks which have copied our
version of this syscall and in the meantime have already merged it in
April 2019:
https://reviews.freebsd.org/D21627https://svnweb.freebsd.org/base?view=revision&revision=359836
The syscall originally came up in a discussion around the new mount
API and making new file descriptor types cloexec by default. During
this discussion, Al suggested the close_range() syscall.
First, it helps to close all file descriptors of an exec()ing task.
This can be done safely via (quoting Al's example from [1] verbatim):
/* that exec is sensitive */
unshare(CLONE_FILES);
/* we don't want anything past stderr here */
close_range(3, ~0U);
execve(....);
The code snippet above is one way of working around the problem that
file descriptors are not cloexec by default. This is aggravated by the
fact that we can't just switch them over without massively regressing
userspace. For a whole class of programs having an in-kernel method of
closing all file descriptors is very helpful (e.g. demons, service
managers, programming language standard libraries, container managers
etc.).
Second, it allows userspace to avoid implementing closing all file
descriptors by parsing through /proc/<pid>/fd/* and calling close() on
each file descriptor and other hacks. From looking at various
large(ish) userspace code bases this or similar patterns are very
common in service managers, container runtimes, and programming
language runtimes/standard libraries such as Python or Rust.
In addition, the syscall will also work for tasks that do not have
procfs mounted and on kernels that do not have procfs support compiled
in. In such situations the only way to make sure that all file
descriptors are closed is to call close() on each file descriptor up
to UINT_MAX or RLIMIT_NOFILE, OPEN_MAX trickery.
Based on Linus' suggestion close_range() also comes with a new flag
CLOSE_RANGE_UNSHARE to more elegantly handle file descriptor dropping
right before exec. This would usually be expressed in the sequence:
unshare(CLONE_FILES);
close_range(3, ~0U);
as pointed out by Linus it might be desirable to have this be a part
of close_range() itself under a new flag CLOSE_RANGE_UNSHARE which
gets especially handy when we're closing all file descriptors above a
certain threshold.
Test-suite as always included"
* tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add CLOSE_RANGE_UNSHARE tests
close_range: add CLOSE_RANGE_UNSHARE
tests: add close_range() tests
arch: wire-up close_range()
open: add close_range()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXyge/QAKCRCRxhvAZXjc
oildAQCCWpnTeXm6hrIE3VZ36X5npFtbaEthdBVAUJM7mo0FYwEA8+Wbnubg6jCw
mztkXCnTfU7tApUdhKtQzcpEws45/Qk=
=REE/
-----END PGP SIGNATURE-----
Merge tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fork cleanups from Christian Brauner:
"This is cleanup series from when we reworked a chunk of the process
creation paths in the kernel and switched to struct
{kernel_}clone_args.
High-level this does two main things:
- Remove the double export of both do_fork() and _do_fork() where
do_fork() used the incosistent legacy clone calling convention.
Now we only export _do_fork() which is based on struct
kernel_clone_args.
- Remove the copy_thread_tls()/copy_thread() split making the
architecture specific HAVE_COYP_THREAD_TLS config option obsolete.
This switches all remaining architectures to select
HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling
convention. The current split makes the process creation codepaths
more convoluted than they need to be. Each architecture has their own
copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it
has a copy_thread_tls() function.
The split is not needed anymore nowadays, all architectures support
CLONE_SETTLS but quite a few of them never bothered to select
HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread()
and use the old calling convention. Removing this split cleans up the
process creation codepaths and paves the way for implementing clone3()
on such architectures since it requires the copy_thread_tls() calling
convention.
After having made each architectures support copy_thread_tls() this
series simply renames that function back to copy_thread(). It also
switches all architectures that call do_fork() directly over to
_do_fork() and the struct kernel_clone_args calling convention. This
is a corollary of switching the architectures that did not yet support
it over to copy_thread_tls() since do_fork() is conditional on not
supporting copy_thread_tls() (Mostly because it lacks a separate
argument for tls which is trivial to fix but there's no need for this
function to exist.).
The do_fork() removal is in itself already useful as it allows to to
remove the export of both do_fork() and _do_fork() we currently have
in favor of only _do_fork(). This has already been discussed back when
we added clone3(). The legacy clone() calling convention is - as is
probably well-known - somewhat odd:
#
# ABI hall of shame
#
config CLONE_BACKWARDS
config CLONE_BACKWARDS2
config CLONE_BACKWARDS3
that is aggravated by the fact that some architectures such as sparc
follow the CLONE_BACKWARDSx calling convention but don't really select
the corresponding config option since they call do_fork() directly.
So do_fork() enforces a somewhat arbitrary calling convention in the
first place that doesn't really help the individual architectures that
deviate from it. They can thus simply be switched to _do_fork()
enforcing a single calling convention. (I really hope that any new
architectures will __not__ try to implement their own calling
conventions...)
Most architectures already have made a similar switch (m68k comes to
mind).
Overall this removes more code than it adds even with a good portion
of added comments. It simplifies a chunk of arch specific assembly
either by moving the code into C or by simply rewriting the assembly.
Architectures that have been touched in non-trivial ways have all been
actually boot and stress tested: sparc and ia64 have been tested with
Debian 9 images. They are the two architectures which have been
touched the most. All non-trivial changes to architectures have seen
acks from the relevant maintainers. nios2 with a custom built
buildroot image. h8300 I couldn't get something bootable to test on
but the changes have been fairly automatic and I'm sure we'll hear
people yell if I broke something there.
All other architectures that have been touched in trivial ways have
been compile tested for each single patch of the series via git rebase
-x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested
even though they have just been trivially touched (removal of the
HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are
basically "core architectures" and since it is trivial to get your
hands on a useable image"
* tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
arch: rename copy_thread_tls() back to copy_thread()
arch: remove HAVE_COPY_THREAD_TLS
unicore: switch to copy_thread_tls()
sh: switch to copy_thread_tls()
nds32: switch to copy_thread_tls()
microblaze: switch to copy_thread_tls()
hexagon: switch to copy_thread_tls()
c6x: switch to copy_thread_tls()
alpha: switch to copy_thread_tls()
fork: remove do_fork()
h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
sparc: unconditionally enable HAVE_COPY_THREAD_TLS
sparc: share process creation helpers between sparc and sparc64
sparc64: enable HAVE_COPY_THREAD_TLS
fork: fold legacy_clone_args_valid() into _do_fork()
Recently random.h started including percpu.h (see commit
f227e3ec3b ("random32: update the net random state on interrupt and
activity")), which broke corenet64_smp_defconfig:
In file included from /linux/arch/powerpc/include/asm/paca.h:18,
from /linux/arch/powerpc/include/asm/percpu.h:13,
from /linux/include/linux/random.h:14,
from /linux/lib/uuid.c:14:
/linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx'
139 | DECLARE_PER_CPU(int, next_tlbcam_idx);
This is due to a circular header dependency:
asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which
includes asm/mmu.h
Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it.
We can fix it by moving the include of paca.h below the include of
asm-generic/percpu.h.
This moves the include of paca.h out of the #ifdef __powerpc64__, but
that is OK because paca.h is almost entirely inside #ifdef
CONFIG_PPC64 anyway.
It also moves the include of paca.h out of the #ifdef CONFIG_SMP,
which could possibly break something, but seems to have no ill
effects.
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Cc: stable@vger.kernel.org # v5.8
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804130558.292328-1-mpe@ellerman.id.au
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl8oO24SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx7ZQP/0lQ0yABnASnwomdOH6+K/m7rvc+e9FE
zx5pTDQswhU5tM7SQAIKqe0uSI+okF2UrBrT5onA16F+JUbnrbexJLazBPfVTTGF
AKpKEQ7Wh69Wz+Y6cQZjm1dTuRL+dlBJuBrzR2tLSnONPMMHuFcO3xd7lgE9UAxC
oGEf393taA6OqcUNRQIa2gqbq+k1qhKjeDucGkbOaoJ6CL0ZyWI+Tfw1WWaBBGv0
/2wBd6V513OH8WtQCW6H3YpHmhYW6OwL8w19KyGcjPRGJaeaIP4W/Ng7mkvgL5ZB
vZqg3XiufFV9uTe8W1NQaVv/NjlN256OteuK809aosTVjD0dhFkhBYg5TLu6HbQq
C/NciZ+78oLedWLT73EUfw3NyS+V0jk6X2EIlBUwNi0Qw1B1pCifGOCKzWFFe5cr
ci4xr4FG7dBkxScOxwFAU2s5TdPHLOkGkQtg4jZr0OYDrzkyLEdsnZEUjLPORo+0
6EBXGfTOSy2CBHcYswRtzJr/1pUTzj7oejhTAMCCuYW2r3VyQtnYcVjlehtp20if
6BfmGisk8nmtxlSm+/Y2FqKa4bNnSTMmr0UJQ+Rjp0tHs47QeucI0ORfZ5nPaBac
+ptvIjWmn3xejT/+oAehpH9066Iuy66vzHdnj7x5+WAsmYS8n8OFtlBFkYELmLJB
3xI5hIl7WtGo
=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
- LKMM updates: mostly documentation changes, but also some new litmus tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again. Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the 'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>, decouple
lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3MTT
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- LKMM updates: mostly documentation changes, but also some new litmus
tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all
fixes in place to support KCSAN, so GCC support can be enabled again.
Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the
'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>,
decouple lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
kcsan: Improve IRQ state trace reporting
lockdep: Refactor IRQ trace events fields into struct
seqlock: lockdep assert non-preemptibility on seqcount_t write
lockdep: Add preemption enabled/disabled assertion APIs
seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
seqlock: Reorder seqcount_t and seqlock_t API definitions
seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
seqlock: Properly format kernel-doc code samples
Documentation: locking: Describe seqlock design and usage
locking/qspinlock: Do not include atomic.h from qspinlock_types.h
locking/atomic: Move ATOMIC_INIT into linux/types.h
lockdep: Move list.h inclusion into lockdep.h
locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
futex: Remove unused or redundant includes
futex: Consistently use fshared as boolean
futex: Remove needless goto's
futex: Remove put_futex_key()
rwsem: fix commas in initialisation
docs: locking: Replace HTTP links with HTTPS ones
...
Initialising the value before using it is generally regarded as a good
idea so do that.
Fixes: 4c51f3e1e8 ("powerpc/powernv/sriov: Make single PE mode a per-BAR setting")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803075408.132601-1-oohall@gmail.com
The assembler says:
arch/powerpc/kernel/head_40x.S:623: Warning: invalid register expression
It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.
Fix it to use a literal 0, the generated code is identical.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722022422.825197-1-mpe@ellerman.id.au
* pm-cpufreq: (24 commits)
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported
cpufreq: intel_pstate: Clean up aperf_mperf_shift description
cpufreq: powernv: Make some symbols static
cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused
cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift()
cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused
cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused
cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues
cpufreq: pasemi: Include header file for {check,restore}_astate prototypes
cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block
cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status
cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks
cpufreq: Replace HTTP links with HTTPS ones
cpufreq: intel_pstate: Fix static checker warning for epp variable
cpufreq: Remove the weakly defined cpufreq_default_governor()
cpufreq: Specify default governor on command line
...
We add support for reporting 'fuel-gauge' NVDIMM metric via
PAPR_PDSM_HEALTH pdsm payload. 'fuel-gauge' metric indicates the usage
life remaining of a papr-scm compatible NVDIMM. PHYP exposes this
metric via the H_SCM_PERFORMANCE_STATS.
The metric value is returned from the pdsm by extending the return
payload 'struct nd_papr_pdsm_health' without breaking the ABI. A new
field 'dimm_fuel_gauge' to hold the metric value is introduced at the
end of the payload struct and its presence is indicated by by
extension flag PDSM_DIMM_HEALTH_RUN_GAUGE_VALID.
The patch introduces a new function papr_pdsm_fuel_gauge() that is
called from papr_pdsm_health(). If fetching NVDIMM performance stats
is supported then 'papr_pdsm_fuel_gauge()' allocated an output buffer
large enough to hold the performance stat and passes it to
drc_pmem_query_stats() that issues the HCALL to PHYP. The return value
of the stat is then populated in the 'struct
nd_papr_pdsm_health.dimm_fuel_gauge' field with extension flag
'PDSM_DIMM_HEALTH_RUN_GAUGE_VALID' set in 'struct
nd_papr_pdsm_health.extension_flags'
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731064153.182203-3-vaibhav@linux.ibm.com
Update papr_scm.c to query dimm performance statistics from PHYP via
H_SCM_PERFORMANCE_STATS hcall and export them to user-space as PAPR
specific NVDIMM attribute 'perf_stats' in sysfs. The patch also
provide a sysfs ABI documentation for the stats being reported and
their meanings.
During NVDIMM probe time in papr_scm_nvdimm_init() a special variant
of H_SCM_PERFORMANCE_STATS hcall is issued to check if collection of
performance statistics is supported or not. If successful then a PHYP
returns a maximum possible buffer length needed to read all
performance stats. This returned value is stored in a per-nvdimm
attribute 'stat_buffer_len'.
The layout of request buffer for reading NVDIMM performance stats from
PHYP is defined in 'struct papr_scm_perf_stats' and 'struct
papr_scm_perf_stat'. These structs are used in newly introduced
drc_pmem_query_stats() that issues the H_SCM_PERFORMANCE_STATS hcall.
The sysfs access function perf_stats_show() uses value
'stat_buffer_len' to allocate a buffer large enough to hold all
possible NVDIMM performance stats and passes it to
drc_pmem_query_stats() to populate. Finally statistics reported in the
buffer are formatted into the sysfs access function output buffer.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731064153.182203-2-vaibhav@linux.ibm.com
perf_callchain_user_64() and perf_callchain_user_32() are nearly
identical. Consolidate into one function with thin wrappers.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
[mpe: Adapt to copy_from_user_nofault(), minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200406210022.32265-1-msuchanek@suse.de
In the unlikely event that the device tree lacks a /cpus node,
find_dlpar_cpus_to_add() oddly frees the cpu_drcs buffer it has been
passed before returning an error. Its only caller also frees the
buffer on error.
Remove the less conventional kfree() of a caller-supplied buffer from
find_dlpar_cpus_to_add().
Fixes: 90edf184b9 ("powerpc/pseries: Add CPU dlpar add functionality")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190919231633.1344-1-nathanl@linux.ibm.com
When investigating issues with partition migration or resource
reassignments it is helpful to have a log of which nodes and
properties in the device tree have changed. Use pr_debug() so it's
easy to enable these at runtime with the dynamic debug facility.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627053044.9238-3-nathanl@linux.ibm.com
The pr_err() callsites in mobility.c already manually include a
"mobility:" prefix, let's make it official for the benefit of messages
to be added later.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627053044.9238-2-nathanl@linux.ibm.com
This can catch cases where the device tree has gotten mishandled into
an inconsistent state at runtime, e.g. the cache nodes for both the
source and the destination are present after a migration.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-5-nathanl@linux.ibm.com
If we have a bug which causes us to start with the wrong kind of OF
node when linking up the cache tree, it's helpful for debugging to
print information about what we found vs what we expected. So replace
uses of WARN_ON_ONCE with WARN_ONCE, which lets us include an
informative message instead of a contentless backtrace.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-4-nathanl@linux.ibm.com
We know that every OF node we deal with in this code is under /cpus,
so we can make the debug messages a little less verbose without losing
information.
E.g.
cacheinfo: creating L1 dcache and icache for /cpus/PowerPC,POWER8@0
cacheinfo: creating L2 ucache for /cpus/l2-cache@2006
cacheinfo: creating L3 ucache for /cpus/l3-cache@3106
becomes
cacheinfo: creating L1 dcache and icache for PowerPC,POWER8@0
cacheinfo: creating L2 ucache for l2-cache@2006
cacheinfo: creating L3 ucache for l3-cache@3106
Replace all '%pOF' specifiers with '%pOFP'.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-3-nathanl@linux.ibm.com
Certain warnings are emitted for powerpc code when building with a gcc-10
toolset:
WARNING: modpost: vmlinux.o(.text.unlikely+0x377c): Section mismatch in
reference from the function remove_pmd_table() to the function
.meminit.text:split_kernel_mapping()
The function remove_pmd_table() references
the function __meminit split_kernel_mapping().
This is often because remove_pmd_table lacks a __meminit
annotation or the annotation of split_kernel_mapping is wrong.
Add the appropriate __init and __meminit annotations to make modpost not
complain. In all the cases there are just a single callsite from another
__init or __meminit function:
__meminit remove_pagetable() -> remove_pud_table() -> remove_pmd_table()
__init prom_init() -> setup_secure_guest()
__init xive_spapr_init() -> xive_spapr_disabled()
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200729133741.62789-1-vdronov@redhat.com
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h.
This allows users of atomic_t to use ATOMIC_INIT without having to
include atomic.h as that way may lead to header loops.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200729123105.GB7047@gondor.apana.org.au
Kernels built with CONFIG_PPC_EARLY_DEBUG_OPAL enabled expects r8 & r9
to be filled with OPAL base & entry addresses respectively. Setting
these registers allows the kernel to perform OPAL calls before the
device tree is parsed.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602303975.575379.5032301944162937479.stgit@hbathini
The kexec purgatory has to run in real mode. Only the first memory
block maybe accessible in real mode. And, unlike the case with panic
kernel, no memory is set aside for regular kexec load. Another thing
to note is, the memory for crashkernel is reserved at an offset of
128MB. So, when crashkernel memory is reserved, the memory ranges to
load kexec segments shrink further as the generic code only looks for
memblock free memory ranges and in all likelihood only a tiny bit of
memory from 0 to 128MB would be available to load kexec segments.
With kdump being used by default in general, kexec file load is likely
to fail almost always. This can be fixed by changing the memory hole
lookup logic for regular kexec to use the same method as kdump. This
would mean that most kexec segments will overlap with crashkernel
memory region. That should still be ok as the pages, whose destination
address isn't available while loading, are placed in an intermediate
location till a flush to the actual destination address happens during
kexec boot sequence.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602302326.575379.14038896654942043093.stgit@hbathini
While initrd, elfcorehdr and backup regions are already added to the
reserve map, there are a few missing regions that need to be added to
the memory reserve map. Add them here. And now that all the changes to
load panic kernel are in place, claim likewise.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602300473.575379.4218568032039284448.stgit@hbathini
Prepare elf headers for the crashing kernel's core file using
crash_prepare_elf64_headers() and pass on this info to kdump kernel by
updating its command line with elfcorehdr parameter. Also, add
elfcorehdr location to reserve map to avoid it from being stomped on
while booting.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Ensure cmdline is nul terminated]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602298855.575379.15819225623219909517.stgit@hbathini
Though kdump kernel boots from loaded address, the first 64KB of it is
copied down to real 0. So, setup a backup region and let purgatory
copy the first 64KB of crashed kernel into this backup region before
booting into kdump kernel. Update reserve map with backup region and
crashed kernel's memory to avoid kdump kernel from accidentially using
that memory.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602294718.575379.16216507537038008623.stgit@hbathini
Kdump kernel, used for capturing the kernel core image, is supposed
to use only specific memory regions to avoid corrupting the image to
be captured. The regions are crashkernel range - the memory reserved
explicitly for kdump kernel, memory used for the tce-table, the OPAL
region and RTAS region as applicable. Restrict kdump kernel memory
to use only these regions by setting up usable-memory DT property.
Also, tell the kdump kernel to run at the loaded address by setting
the magic word at 0x5c.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602284284.575379.6962016255404325493.stgit@hbathini
Currently, numa & prom are the only users of drmem LMB walk code.
Loading kdump with kexec_file also needs to walk the drmem LMBs to
setup the usable memory ranges for kdump kernel. But there are couple
of issues in using the code as is. One, walk_drmem_lmb() code is built
into the .init section currently, while kexec_file needs it later.
Two, there is no scope to pass data to the callback function for
processing and/or erroring out on certain conditions.
Fix that by, moving drmem LMB walk code out of .init section, adding
scope to pass data to the callback function and bailing out when an
error is encountered in the callback function.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602282727.575379.3979857013827701828.stgit@hbathini
crashkernel region could have an overlap with special memory regions
like OPAL, RTAS, TCE table & such. These regions are referred to as
excluded memory ranges. Setup these ranges during image probe in order
to avoid them while finding the buffer for different kdump segments.
Override arch_kexec_locate_mem_hole() to locate a memory hole taking
these ranges into account.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602281047.575379.6636807148335160795.stgit@hbathini
In kexec case, the kernel to be loaded uses the same memory layout as
the running kernel. So, passing on the DT of the running kernel would
be good enough.
But in case of kdump, different memory ranges are needed to manage
loading the kdump kernel, booting into it and exporting the elfcore of
the crashing kernel. The ranges are exclude memory ranges, usable
memory ranges, reserved memory ranges and crash memory ranges.
Exclude memory ranges specify the list of memory ranges to avoid while
loading kdump segments. Usable memory ranges list the memory ranges
that could be used for booting kdump kernel. Reserved memory ranges
list the memory regions for the loading kernel's reserve map. Crash
memory ranges list the memory ranges to be exported as the crashing
kernel's elfcore.
Add helper functions for setting up the above mentioned memory ranges.
This helpers facilitate in understanding the subsequent changes better
and make it easy to setup the different memory ranges listed above, as
and when appropriate.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602279194.575379.8526552316948643550.stgit@hbathini
Some of the kexec_file_load code isn't PPC64 specific. Move PPC64
specific code from kexec/file_load.c to kexec/file_load_64.c. Also,
rename purgatory/trampoline.S to purgatory/trampoline_64.S in the same
spirit. No functional changes.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602276920.575379.10390965946438306388.stgit@hbathini
I've forgotten to manually enable NVME when building pseries kernels
for machines with NVME adapters. Since it's a reasonably common
configuration, enable it by default.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200729040828.2312966-1-anton@ozlabs.org
With the proposed change in percpu bootmem allocator to use page
mapping [1], the percpu first chunk memory area can come from vmalloc
ranges. This makes the HMI (Hypervisor Maintenance Interrupt) handler
crash the kernel whenever percpu variable is accessed in real mode.
This patch fixes this issue by moving the HMI IRQ stat inside paca for
safe access in realmode.
[1] https://lore.kernel.org/linuxppc-dev/20200608070904.387440-1-aneesh.kumar@linux.ibm.com/
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159290806973.3642154.5244613424529764050.stgit@jupiter
This just adds the zl2006 voltage regulators / power monitors and the
onboard I2C eeproms. The ICS9FG108 clock chip doesn't seem to have a
driver, so it is left in the DTS as a comment. And for good measure,
the SPD eeproms are tagged as such.
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20180920230422.GK487685@eidolon.nox.tf
Function declarations don't need externs, remove the existing ones
so they are consistent with newer code
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200415012343.919255-2-alastair@d-silva.org
Add testcases for divde, divde., divdeu, divdeu. emulated instructions
to cover few scenarios,
- with same dividend and divisor to have undefine RT
for divdeu[.]
- with divide by zero to have undefine RT for both
divde[.] and divdeu[.]
- with negative dividend to cover -|divisor| < r <= 0 if
the dividend is negative for divde[.]
- normal case with proper dividend and divisor for both
divde[.] and divdeu[.]
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200728130308.1790982-4-bala24@linux.ibm.com
Include instruction opcodes for divde and divdeu as macros.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200728130308.1790982-2-bala24@linux.ibm.com
Gcc report warning as follows:
arch/powerpc/platforms/powernv/pci-sriov.c:602:25: warning:
variable 'phb' set but not used [-Wunused-but-set-variable]
602 | struct pnv_phb *phb;
| ^~~
This variable is not used, so this commit removing it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727171112.2781-1-weiyongjun1@huawei.com
This adds a kernel command line option that can be used to disable GTSE support.
Disabling GTSE implies kernel will make hcalls to invalidate TLB entries.
This was done so that we can do VM migration between configs that enable/disable
GTSE support via hypervisor. To migrate a VM from a system that supports
GTSE to a system that doesn't, we can boot the guest with
radix_hcall_invalidate=on, thereby forcing the guest to use hcalls for TLB
invalidates.
The check for hcall availability is done in pSeries_setup_arch so that
the panic message appears on the console. This should only happen on
a hypervisor that doesn't force the guest to hash translation even
though it can't handle the radix GTSE=0 request via CAS. With
radix_hcall_invalidate=on if the hypervisor doesn't support hcall_rpt_invalidate
hcall it should force the LPAR to hash translation.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727085908.420806-1-aneesh.kumar@linux.ibm.com
Current kernel gives:
[ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000
[ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node
[ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000
With the fix
[ 0.000000] kvm_cma_reserve: reserving 26214 MiB for global area
[ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000
[ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node
[ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713150749.25245-2-aneesh.kumar@linux.ibm.com
commit: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
added support for allocating gigantic hugepages using CMA. This patch
enables the same for powerpc
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713150749.25245-1-aneesh.kumar@linux.ibm.com
Data Cache Block Invalidate (dcbi) instruction implemented back in
PowerPC architecture version 2.03. But as per Power Processor Users Manual
it is obsolete and not supported by POWER8/POWER9 core. Attempt to use of
this illegal instruction results in a hypervisor emulation assistance
interrupt. So, ifdef it out the option `i` in xmon for 64bit Book3S.
0:mon> fi
cpu 0x0: Vector: 700 (Program Check) at [c000000003be74a0]
pc: c000000000102030: cacheflush+0x180/0x1a0
lr: c000000000101f3c: cacheflush+0x8c/0x1a0
sp: c000000003be7730
msr: 8000000000081033
current = 0xc0000000035e5c00
paca = 0xc000000001910000 irqmask: 0x03 irq_happened: 0x01
pid = 1025, comm = bash
Linux version 5.6.0-rc5-g5aa19adac (root@ltc-wspoon6) (gcc version 7.4.0
(Ubuntu 7.4.0-1ubuntu1~18.04.1)) #1 SMP Tue Mar 10 04:38:41 CDT 2020
cpu 0x0: Exception 700 (Program Check) in xmon, returning to main loop
[c000000003be7c50] c00000000084abb0 __handle_sysrq+0xf0/0x2a0
[c000000003be7d00] c00000000084b3c0 write_sysrq_trigger+0xb0/0xe0
[c000000003be7d30] c0000000004d1edc proc_reg_write+0x8c/0x130
[c000000003be7d60] c00000000040dc7c __vfs_write+0x3c/0x70
[c000000003be7d80] c000000000410e70 vfs_write+0xd0/0x210
[c000000003be7dd0] c00000000041126c ksys_write+0xdc/0x130
[c000000003be7e20] c00000000000b9d0 system_call+0x5c/0x68
--- Exception: c01 (System Call) at 00007fffa345e420
SP (7ffff0b08ab0) is in userspace
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200330075954.538773-1-bala24@linux.ibm.com
There's a comment in time.h referring to CONFIG_POWER, which doesn't
exist. That confuses scripts/checkkconfigsymbols.py.
Presumably the comment was referring to a CONFIG_POWER vs CONFIG_PPC,
in which case for CONFIG_POWER we would #define __USE_RTC to 1. But
instead we have CONFIG_PPC_BOOK3S_601, and these days we have
IS_ENABLED().
So the comment is no longer relevant, drop it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-9-mpe@ellerman.id.au
Commit 866bfc75f4 ("powerpc: conditionally compile platform-specific
serial drivers") made some code depend on CONFIG_PPC_MPC52XX, which
doesn't exist.
Fix it to use CONFIG_PPC_MPC52xx.
Fixes: 866bfc75f4 ("powerpc: conditionally compile platform-specific serial drivers")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-7-mpe@ellerman.id.au
All 32 and 64-bit builds that don't have CONFIG_TAU_INT enabled (all
of them), get a definition of TAUException() in traps.c.
On 64-bit it's completely useless, and just wastes ~120 bytes of text.
On 32-bit it allows the kernel to link because head_32.S calls it
unconditionally.
Instead follow the example of altivec_assist_exception(), and if
CONFIG_TAU_INT is not enabled just point it at unknown_exception using
the preprocessor.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-6-mpe@ellerman.id.au
We have two uses of CONFIG_BOOK3S_601, which doesn't exist. Fix them
to use CONFIG_PPC_BOOK3S_601 which is the correct symbol.
Fixes: 12c3f1fd87 ("powerpc/32s: get rid of CPU_FTR_601 feature")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-5-mpe@ellerman.id.au
This code was merged 11 years ago in commit 13363ab9b9 ("powerpc:
Add definitions used by exception handling on 64-bit Book3E") but was
never able to be built because CONFIG_BOOK3E_MMU_TLB_STATS never
existed. Remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-4-mpe@ellerman.id.au
There's a comment in lite5200_sleep.S that refers to "CONFIG_BDI*".
This confuses scripts/checkkconfigsymbols.py, which thinks it should
be able to find CONFIG_BDI.
Change the comment to refer to CONFIG_BDI_SWITCH which is presumably
roughly what it was referring to. AFAICS there never has been a
CONFIG_BDI.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-3-mpe@ellerman.id.au
During memory hotplug and unplug, resize_hpt_for_hotplug() gets called
for both hash and radix guests but it should be called only for hash
guests. Though the call does nothing in the radix guest case, it is
cleaner to push this call into hash specific memory hotplug routines.
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727095704.1432916-1-bharata@linux.ibm.com
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The logic aims to prevent userspace from doing bad accesses below the
stack pointer. However as long as the stack is < 1MB in size, we allow
all accesses without further checks. Adding some debug I see that I
can do a full kernel build and LTP run, and not a single process has
used more than 1MB of stack. So for the majority of processes the
logic never even fires.
We also recently found a nasty bug in this code which could cause
userspace programs to be killed during signal delivery. It went
unnoticed presumably because most processes use < 1MB of stack.
The generic mm code has also grown support for stack guard pages since
this code was originally written, so the most heinous case of the
stack expanding into other mappings is now handled for us.
Finally although some other arches have special logic in this path,
from what I can tell none of x86, arm64, arm and s390 impose any extra
checks other than those in expand_stack().
So drop our complicated logic and like other architectures just let
the stack expand as long as its within the rlimit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20200724092528.1578671-4-mpe@ellerman.id.au
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.
The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.
Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.
The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).
The 2048 byte allowance was correct until 2008 as the signal frame
was:
struct rt_sigframe {
struct ucontext uc; /* 0 1440 */
/* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1440 16 */
unsigned int tramp[6]; /* 1456 24 */
struct siginfo * pinfo; /* 1480 8 */
void * puc; /* 1488 8 */
struct siginfo info; /* 1496 128 */
/* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1624 288 */
/* size: 1920, cachelines: 15, members: 7 */
/* padding: 8 */
};
1920 + 128 = 2048
Then in commit ce48b21007 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */ <--
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1696 16 */
unsigned int tramp[6]; /* 1712 24 */
struct siginfo * pinfo; /* 1736 8 */
void * puc; /* 1744 8 */
struct siginfo info; /* 1752 128 */
/* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1880 288 */
/* size: 2176, cachelines: 17, members: 7 */
/* padding: 8 */
};
2176 + 128 = 2304
At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.
Then in 2010 commit 320b2b8de1 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.
That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */ <--
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[288]; /* 3576 288 */
/* size: 3872, cachelines: 31, members: 8 */
/* padding: 8 */
/* last cacheline: 32 bytes */
};
3872 + 128 = 4000
And commit 573ebfa660 ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[512]; /* 3576 512 */ <--
/* size: 4096, cachelines: 32, members: 8 */
/* padding: 8 */
};
4096 + 128 = 4224
Then finally in 2017, commit 1be7107fbe ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.
Fix it by increasing the allowance to 4224 bytes.
Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.
Fixes: ce48b21007 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
KVM guests have certain restrictions and performance quirks when using
doorbells. This patch moves the EPAPR KVM guest test so it can be shared
with PSERIES, and uses that in doorbell setup code to apply the KVM
guest quirks and improves IPI performance for two cases:
- PowerVM guests may now use doorbells even if they are secure.
- KVM guests no longer use doorbells if XIVE is available.
There is a valid complaint that "KVM guest" is not a very reasonable
thing to test for, it's preferable for the hypervisor to advertise
particular behaviours to the guest so they could change if the
hypervisor implementation or configuration changes. However in this case
we were already assuming a KVM guest worst case, so this patch is about
containing those quirks. If KVM later advertises fast doorbells, we
should test for that and override the quirks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726035155.1424103-4-npiggin@gmail.com
KVM supports msgsndp in guests by trapping and emulating the
instruction, so it was decided to always use XIVE for IPIs if it is
available. However on PowerVM systems, msgsndp can be used and gives
better performance. On large systems, high XIVE interrupt rates can
have sub-linear scaling, and using msgsndp can reduce the load on
the interrupt controller.
So switch to using core local doorbells even if XIVE is available.
This reduces performance for KVM guests with an SMT topology by
about 50% for ping-pong context switching between SMT vCPUs. An
option vector (or dt-cpu-ftrs) could be defined to disable msgsndp
to get KVM performance back.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726035155.1424103-3-npiggin@gmail.com
These are only called in one place for a given platform, so inline
them for performance.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
[mpe: Fix build errors related to KVM]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726035155.1424103-2-npiggin@gmail.com
Commit 9908c826d5 ("powerpc/perf: Add Power10 PMU feature to DT CPU
features") defines MMCRA_BHRB_DISABLE as `0x2000000000UL`. Binutils
version less than 2.28 doesn't support UL suffix.
arch/powerpc/kernel/cpu_setup_power.S: Assembler messages:
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: operand out of range (0x0000002000000000 is not between 0xffffffffffff8000 and 0x000000000000ffff)
Fix this by wrapping it with the `_UL` macro.
Fixes: 9908c826d5 ("Add Power10 PMU feature to DT CPU features")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1595996214-5833-1-git-send-email-atrajeev@linux.vnet.ibm.com
The src_owner field in struct migrate_vma is being used for two purposes,
it acts as a selection filter for which types of pages are to be migrated
and it identifies device private pages owned by the caller.
Split this into separate parameters so the src_owner field can be used
just to identify device private pages owned by the caller of
migrate_vma_setup().
Rename the src_owner field to pgmap_owner to reflect it is now used only
to identify which device private pages to migrate.
Link: https://lore.kernel.org/r/20200723223004.9586-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a secure memslot is dropped, all the pages backed in the secure
device (aka really backed by secure memory by the Ultravisor)
should be paged out to a normal page. Previously, this was
achieved by triggering the page fault mechanism which is calling
kvmppc_svm_page_out() on each pages.
This can't work when hot unplugging a memory slot because the memory
slot is flagged as invalid and gfn_to_pfn() is then not trying to access
the page, so the page fault mechanism is not triggered.
Since the final goal is to make a call to kvmppc_svm_page_out() it seems
simpler to call directly instead of triggering such a mechanism. This
way kvmppc_uvmem_drop_pages() can be called even when hot unplugging a
memslot.
Since kvmppc_uvmem_drop_pages() is already holding kvm->arch.uvmem_lock,
the call to __kvmppc_svm_page_out() is made. As
__kvmppc_svm_page_out needs the vma pointer to migrate the pages,
the VMA is fetched in a lazy way, to not trigger find_vma() all
the time. In addition, the mmap_sem is held in read mode during
that time, not in write mode since the virual memory layout is not
impacted, and kvm->arch.uvmem_lock prevents concurrent operation
on the secure device.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[modified check on the VMA in kvmppc_uvmem_drop_pages]
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[modified the changelog description]
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
kvmppc_svm_page_out() will need to be called by kvmppc_uvmem_drop_pages()
so move it up earlier in this file.
Furthermore it will be interesting to call this function when already
holding the kvm->arch.uvmem_lock, so prefix the original function with __
and remove the locking in it, and introduce a wrapper which call that
function with the lock held.
There is no functional change.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When a memory slot is hot plugged to a SVM, PFNs associated with the
GFNs in that slot must be migrated to the secure-PFNs, aka device-PFNs.
Call kvmppc_uv_migrate_mem_slot() to accomplish this.
Disable page-merge for all pages in the memory slot.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[rearranged the code, and modified the commit log]
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The Ultravisor is expected to explicitly call H_SVM_PAGE_IN for all the
pages of the SVM before calling H_SVM_INIT_DONE. This causes a huge
delay in tranistioning the VM to SVM. The Ultravisor is only interested
in the pages that contain the kernel, initrd and other important data
structures. The rest contain throw-away content.
However if not all pages are requested by the Ultravisor, the Hypervisor
continues to consider the GFNs corresponding to the non-requested pages
as normal GFNs. This can lead to data-corruption and undefined behavior.
In H_SVM_INIT_DONE handler, move all the PFNs associated with the SVM's
GFNs to secure-PFNs. Skip the GFNs that are already Paged-in or Shared
or Paged-in followed by a Paged-out.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
During the life of SVM, its GFNs transition through normal, secure and
shared states. Since the kernel does not track GFNs that are shared, it
is not possible to disambiguate a shared GFN from a GFN whose PFN has
not yet been migrated to a secure-PFN. Also it is not possible to
disambiguate a secure-GFN from a GFN whose GFN has been pagedout from
the ultravisor.
The ability to identify the state of a GFN is needed to skip migration
of its PFN to secure-PFN during ESM transition.
The code is re-organized to track the states of a GFN as explained
below.
************************************************************************
1. States of a GFN
---------------
The GFN can be in one of the following states.
(a) Secure - The GFN is secure. The GFN is associated with
a Secure VM, the contents of the GFN is not accessible
to the Hypervisor. This GFN can be backed by a secure-PFN,
or can be backed by a normal-PFN with contents encrypted.
The former is true when the GFN is paged-in into the
ultravisor. The latter is true when the GFN is paged-out
of the ultravisor.
(b) Shared - The GFN is shared. The GFN is associated with a
a secure VM. The contents of the GFN is accessible to
Hypervisor. This GFN is backed by a normal-PFN and its
content is un-encrypted.
(c) Normal - The GFN is a normal. The GFN is associated with
a normal VM. The contents of the GFN is accesible to
the Hypervisor. Its content is never encrypted.
2. States of a VM.
---------------
(a) Normal VM: A VM whose contents are always accessible to
the hypervisor. All its GFNs are normal-GFNs.
(b) Secure VM: A VM whose contents are not accessible to the
hypervisor without the VM's consent. Its GFNs are
either Shared-GFN or Secure-GFNs.
(c) Transient VM: A Normal VM that is transitioning to secure VM.
The transition starts on successful return of
H_SVM_INIT_START, and ends on successful return
of H_SVM_INIT_DONE. This transient VM, can have GFNs
in any of the three states; i.e Secure-GFN, Shared-GFN,
and Normal-GFN. The VM never executes in this state
in supervisor-mode.
3. Memory slot State.
------------------
The state of a memory slot mirrors the state of the
VM the memory slot is associated with.
4. VM State transition.
--------------------
A VM always starts in Normal Mode.
H_SVM_INIT_START moves the VM into transient state. During this
time the Ultravisor may request some of its GFNs to be shared or
secured. So its GFNs can be in one of the three GFN states.
H_SVM_INIT_DONE moves the VM entirely from transient state to
secure-state. At this point any left-over normal-GFNs are
transitioned to Secure-GFN.
H_SVM_INIT_ABORT moves the transient VM back to normal VM.
All its GFNs are moved to Normal-GFNs.
UV_TERMINATE transitions the secure-VM back to normal-VM. All
the secure-GFN and shared-GFNs are tranistioned to normal-GFN
Note: The contents of the normal-GFN is undefined at this point.
5. GFN state implementation:
-------------------------
Secure GFN is associated with a secure-PFN; also called uvmem_pfn,
when the GFN is paged-in. Its pfn[] has KVMPPC_GFN_UVMEM_PFN flag
set, and contains the value of the secure-PFN.
It is associated with a normal-PFN; also called mem_pfn, when
the GFN is pagedout. Its pfn[] has KVMPPC_GFN_MEM_PFN flag set.
The value of the normal-PFN is not tracked.
Shared GFN is associated with a normal-PFN. Its pfn[] has
KVMPPC_UVMEM_SHARED_PFN flag set. The value of the normal-PFN
is not tracked.
Normal GFN is associated with normal-PFN. Its pfn[] has
no flag set. The value of the normal-PFN is not tracked.
6. Life cycle of a GFN
--------------------
--------------------------------------------------------------
| | Share | Unshare | SVM |H_SVM_INIT_DONE|
| |operation |operation | abort/ | |
| | | | terminate | |
-------------------------------------------------------------
| | | | | |
| Secure | Shared | Secure |Normal |Secure |
| | | | | |
| Shared | Shared | Secure |Normal |Shared |
| | | | | |
| Normal | Shared | Secure |Normal |Secure |
--------------------------------------------------------------
7. Life cycle of a VM
--------------------
--------------------------------------------------------------------
| | start | H_SVM_ |H_SVM_ |H_SVM_ |UV_SVM_ |
| | VM |INIT_START|INIT_DONE|INIT_ABORT |TERMINATE |
| | | | | | |
--------- ----------------------------------------------------------
| | | | | | |
| Normal | Normal | Transient|Error |Error |Normal |
| | | | | | |
| Secure | Error | Error |Error |Error |Normal |
| | | | | | |
|Transient| N/A | Error |Secure |Normal |Normal |
--------------------------------------------------------------------
************************************************************************
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Page-merging of pages in memory-slots associated with a Secure VM
is disabled in H_SVM_PAGE_IN handler.
This operation should have been done the much earlier; the moment the VM
is initiated for secure-transition. Delaying this operation increases
the probability for those pages to acquire new references, making it
impossible to migrate those pages in H_SVM_PAGE_IN handler.
Disable page-migration in H_SVM_INIT_START handling.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Without this fix, git is confused. It generates wrong
function context for code changes in subsequent patches.
Weird, but true.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Note: compat variant of REGSET_TM_CGPR is almost certainly wrong;
it claims to be 48*64bit, but just as compat REGSET_GPR it stores
44*32bit of (truncated) registers + 4 32bit zeros... followed by
48 more 32bit zeroes. Might be too late to change - it's a userland
ABI, after all ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all uses are conditional upon ELF_CORE_COPY_XFPREGS, which has not
been defined on any architecture since 2010
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
skiroot_defconfig fails:
arch/powerpc/kernel/fadump.c:48:17: error: ‘cpus_in_fadump’ defined but not used
48 | static atomic_t cpus_in_fadump;
Fix it by moving the definition into the #ifdef where it's used.
Fixes: ba608c4fa1 ("powerpc/fadump: fix race between pstore write and fadump crash trigger")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727070341.595634-1-mpe@ellerman.id.au
Commit 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the
caller") removed the local_irq_disable from hash_preload, but it was
required for more than just the page table walk: the hash pte busy bit is
effectively a lock which may be taken in interrupt context, and the local
update flag test must not be preempted before it's used.
This solves apparent lockups with perf interrupting __hash_page_64K. If
get_perf_callchain then also takes a hash fault on the same page while it
is already locked, it will loop forever taking hash faults, which looks like
this:
cpu 0x49e: Vector: 100 (System Reset) at [c00000001a4f7d70]
pc: c000000000072dc8: hash_page_mm+0x8/0x800
lr: c00000000000c5a4: do_hash_page+0x24/0x38
sp: c0002ac1cc69ac70
msr: 8000000000081033
current = 0xc0002ac1cc602e00
paca = 0xc00000001de1f280 irqmask: 0x03 irq_happened: 0x01
pid = 20118, comm = pread2_processe
Linux version 5.8.0-rc6-00345-g1fad14f18bc6
49e:mon> t
[c0002ac1cc69ac70] c00000000000c5a4 do_hash_page+0x24/0x38 (unreliable)
--- Exception: 300 (Data Access) at c00000000008fa60 __copy_tofrom_user_power7+0x20c/0x7ac
[link register ] c000000000335d10 copy_from_user_nofault+0xf0/0x150
[c0002ac1cc69af70] c00032bf9fa3c880 (unreliable)
[c0002ac1cc69afa0] c000000000109df0 read_user_stack_64+0x70/0xf0
[c0002ac1cc69afd0] c000000000109fcc perf_callchain_user_64+0x15c/0x410
[c0002ac1cc69b060] c000000000109c00 perf_callchain_user+0x20/0x40
[c0002ac1cc69b080] c00000000031c6cc get_perf_callchain+0x25c/0x360
[c0002ac1cc69b120] c000000000316b50 perf_callchain+0x70/0xa0
[c0002ac1cc69b140] c000000000316ddc perf_prepare_sample+0x25c/0x790
[c0002ac1cc69b1a0] c000000000317350 perf_event_output_forward+0x40/0xb0
[c0002ac1cc69b220] c000000000306138 __perf_event_overflow+0x88/0x1a0
[c0002ac1cc69b270] c00000000010cf70 record_and_restart+0x230/0x750
[c0002ac1cc69b620] c00000000010d69c perf_event_interrupt+0x20c/0x510
[c0002ac1cc69b730] c000000000027d9c performance_monitor_exception+0x4c/0x60
[c0002ac1cc69b750] c00000000000b2f8 performance_monitor_common_virt+0x1b8/0x1c0
--- Exception: f00 (Performance Monitor) at c0000000000cb5b0 pSeries_lpar_hpte_insert+0x0/0x160
[link register ] c0000000000846f0 __hash_page_64K+0x210/0x540
[c0002ac1cc69ba50] 0000000000000000 (unreliable)
[c0002ac1cc69bb00] c000000000073ae0 update_mmu_cache+0x390/0x3a0
[c0002ac1cc69bb70] c00000000037f024 wp_page_copy+0x364/0xce0
[c0002ac1cc69bc20] c00000000038272c do_wp_page+0xdc/0xa60
[c0002ac1cc69bc70] c0000000003857bc handle_mm_fault+0xb9c/0x1b60
[c0002ac1cc69bd50] c00000000006c434 __do_page_fault+0x314/0xc90
[c0002ac1cc69be20] c00000000000c5c8 handle_page_fault+0x10/0x2c
--- Exception: 300 (Data Access) at 00007fff8c861fe8
SP (7ffff6b19660) is in userspace
Fixes: 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the caller")
Reported-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reported-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727060947.10060-1-npiggin@gmail.com
In note_page(), the pg_state is updated the same way in two places.
Add note_page_update_state() to do it.
Also include the display of boundary markers there as it is missing
"no level" leg, leading to a mismatch when the first two markers
are at the same address and the first displayed area uses that
address.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a284a809f01c705bbaab303b06fda216f147a99a.1593429426.git.christophe.leroy@csgroup.eu
When STRICT_KERNEL_RWX is set, we want to set NX bit on vmalloc
segments. But modules require exec.
Use a dedicated segment for modules. There is not much space
above kernel, and we don't waste vmalloc space to do alignment.
Therefore, we take the segment before PAGE_OFFSET for modules.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eb8faba9148b6cf17c696ba776b4e8ee2f6313bf.1593428200.git.christophe.leroy@csgroup.eu
User space stops at TASK_SIZE. At the moment, kernel space starts
at PAGE_OFFSET.
In order to use space between TASK_SIZE and PAGE_OFFSET for modules,
make TASK_SIZE the limit between user and kernel space.
Note that fault.c already considers TASK_SIZE as the boundary between
user and kernel space.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b38b52cd8dabbb56fbd6f9219d6f3cdccbb43b44.1593428200.git.christophe.leroy@csgroup.eu
In order to allow allocation of modules outside of vmalloc space,
use MODULES_VADDR and MODULES_END when MODULES_VADDR is defined.
Redefine module_alloc() when MODULES_VADDR defined.
Unmap corresponding KASAN shadow memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7ecf5fff1eef67d450e73fc412b6ec3818483d75.1593428200.git.christophe.leroy@csgroup.eu
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/papr_scm.c:97:1: warning:
symbol 'papr_nd_regions' was not declared. Should it be static?
arch/powerpc/platforms/pseries/papr_scm.c:98:1: warning:
symbol 'papr_ndr_lock' was not declared. Should it be static?
Those variables are not used outside of papr_scm.c, so this
commit marks them static.
Fixes: 85343a8da2 ("powerpc/papr/scm: Add bad memory ranges to nvdimm bad ranges")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725091949.75234-1-weiyongjun1@huawei.com
Clang's objdump emits slightly different output from GNU's objdump,
causing a list of warnings to be emitted during relocatable builds.
E.g., clang's objdump emits this:
c000000000000004: 2c 00 00 48 b 0xc000000000000030
...
c000000000005c6c: 10 00 82 40 bf 2, 0xc000000000005c7c
while GNU objdump emits:
c000000000000004: 2c 00 00 48 b c000000000000030 <__start+0x30>
...
c000000000005c6c: 10 00 82 40 bne c000000000005c7c <masked_interrupt+0x3c>
Adjust llvm-objdump's output to remove the extraneous '0x' and convert
'bf' and 'bt' to 'bne' and 'beq' resp. to more closely match GNU
objdump's output.
Note that clang's objdump doesn't yet output the relocation symbols on
PPC.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/191c67db31264b69cf6b566fd69851beb3dd0abb.1595630874.git.morbo@google.com
This implements smp_cond_load_relaxed() with the slowpath busy loop
using the preferred SMT priority pattern.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
[mpe: Make it 64-bit only to fix build errors on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-7-npiggin@gmail.com
This brings the behaviour of the uncontended fast path back to roughly
equivalent to simple spinlocks -- a single atomic op with lock hint.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-6-npiggin@gmail.com
This implements the generic paravirt qspinlocks using H_PROD and
H_CONFER to kick and wait.
This uses an un-directed yield to any CPU rather than the directed
yield to a pre-empted lock holder that paravirtualised simple
spinlocks use, that requires no kick hcall. This is something that
could be investigated and improved in future.
Performance results can be found in the commit which added queued
spinlocks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-5-npiggin@gmail.com
These have shown significantly improved performance and fairness when
spinlock contention is moderate to high on very large systems.
With this series including subsequent patches, on a 16 socket 1536
thread POWER9, a stress test such as same-file open/close from all
CPUs gets big speedups, 11620op/s aggregate with simple spinlocks vs
384158op/s (33x faster), where the difference in throughput between
the fastest and slowest thread goes from 7x to 1.4x.
Thanks to the fast path being identical in terms of atomics and
barriers (after a subsequent optimisation patch), single threaded
performance is not changed (no measurable difference).
On smaller systems, performance and fairness seems to be generally
improved. Using dbench on tmpfs as a test (that starts to run into
kernel spinlock contention), a 2-socket OpenPOWER POWER9 system was
tested with bare metal and KVM guest configurations. Results can be
found here:
https://github.com/linuxppc/issues/issues/305#issuecomment-663487453
Observations are:
- Queued spinlocks are equal when contention is insignificant, as
expected and as measured with microbenchmarks.
- When there is contention, on bare metal queued spinlocks have better
throughput and max latency at all points.
- When virtualised, queued spinlocks are slightly worse approaching
peak throughput, but significantly better throughput and max latency
at all points beyond peak, until queued spinlock maximum latency
rises when clients are 2x vCPUs.
The regressions haven't been analysed very well yet, there are a lot
of things that can be tuned, particularly the paravirtualised locking,
but the numbers already look like a good net win even on relatively
small systems.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-4-npiggin@gmail.com
To prepare for queued spinlocks. This is a simple rename except to
update preprocessor guard name and a file reference.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-3-npiggin@gmail.com
These functions will be used by the queued spinlock implementation,
and may be useful elsewhere too, so move them out of spinlock.h.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-2-npiggin@gmail.com
MAX_NUMNODES is a theoretical maximum number of nodes thats is
supported by the kernel. Device tree properties exposes the number of
possible nodes on the current platform. The kernel would detected this
and would use it for most of its resource allocations. If the platform
now increases the nodes to over what was already exposed, then it may
lead to inconsistencies. Hence limit it to the already exposed nodes.
Suggested-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724105809.24733-1-srikar@linux.vnet.ibm.com
Initialize Monitor Mode Control Register 3 (MMCR3)
SPR which is new in power10. For PowerISA v3.1, BHRB disable
is controlled via Monitor Mode Control Register A (MMCRA) bit,
namely "BHRB Recording Disable (BHRBRD)". This patch also initializes
MMCRA BHRBRD to disable BHRB feature at boot for power10.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1595489557-2047-1-git-send-email-atrajeev@linux.vnet.ibm.com
Previously iov->vfs_expanded was used for two purposes.
1) To work out how much we need to multiple the per-VF BAR size to figure
out the total space required for the IOV BAR.
2) To indicate that IOV is not usable with this device (vfs_expanded == 0).
We don't really need the field for either since the multiple in 1) is
always the number PEs supported by the PHB. Similarly, we don't really need
it in 2) either since the IOV data field will be NULL if we can't use IOV
with the device.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-16-oohall@gmail.com
Using single PE BARs to map an SR-IOV BAR is really a choice about what
strategy to use when mapping a BAR. It doesn't make much sense for this to
be a global setting since a device might have one large BAR which needs to
be mapped with single PE windows and another smaller BAR that can be mapped
with a regular segmented window. Make the segmented vs single decision a
per-BAR setting and clean up the logic that decides which mode to use.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-15-oohall@gmail.com
Split up the logic so that we have one branch that handles setting up a
segmented window and another that handles setting up single PE windows for
each VF.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-14-oohall@gmail.com
I want to refactor the loop this code is currently inside of. Hoist it on
out.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-13-oohall@gmail.com
Remove the IODA2 PHB checks. We already assume IODA2 in several places so
there's not much point in wrapping most of the setup and teardown process
in an if block.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-12-oohall@gmail.com
Currently the iov->pe_num_map[] does one of two things depending on
whether single PE mode is being used or not. When it is, this contains an
array which maps a vf_index to the corresponding PE number. When single PE
mode is not being used this contains a scalar which is the base PE for the
set of enabled VFs (for for VFn is base + n).
The array was necessary because when calling pnv_ioda_alloc_pe() there is
no guarantee that the allocated PEs would be contigious. We can now
allocate contigious blocks of PEs so this is no longer an issue. This
allows us to drop the if (single_mode) {} .. else {} block scattered
through the SR-IOV code which is a nice clean up.
This also fixes a bug in pnv_pci_sriov_disable() which is the non-atomic
bitmap_clear() to manipulate the PE allocation map. Other users of the map
assume it will be accessed with atomic ops.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-11-oohall@gmail.com
Rework the PE allocation logic to allow allocating blocks of PEs rather
than individually. We'll use this to allocate contigious blocks of PEs for
the SR-IOVs.
This patch also adds code to pnv_ioda_alloc_pe() and pnv_ioda_reserve_pe() to
use the existing, but unused, phb->pe_alloc_mutex. Currently these functions
use atomic bit ops to release a currently allocated PE number. However,
the pnv_ioda_alloc_pe() wants to have exclusive access to the bit map while
scanning for hole large enough to accomodate the allocation size.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-10-oohall@gmail.com
The sequence required to use the single PE BAR mode is kinda janky and
requires a little explanation. The API was designed with P7-IOC style
windows where the setup process is something like:
1. Configure the window start / end address
2. Enable the window
3. Map the segments of each window to the PE
For Single PE BARs the process is:
1. Set the PE for segment zero on a disabled window
2. Set the range
3. Enable the window
Move the OPAL calls into their own helper functions where the quirks can be
contained.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-9-oohall@gmail.com
No need for the multi-dimensional arrays, just use a bitmap.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-8-oohall@gmail.com
This prevents SR-IOV being used by making the SR-IOV BAR resources
unallocatable. Rename it to reflect what it actually does.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-7-oohall@gmail.com
SR-IOV support on PowerNV is a byzantine maze of hooks. I have no idea
how anyone is supposed to know how it works except through a lot of
stuffering. Write up some docs about the overall story to help out
the next sucker^Wperson who needs to tinker with it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-6-oohall@gmail.com
pci-ioda.c is getting a bit unwieldly due to the amount of stuff jammed in
there. The SR-IOV support can be extracted easily enough and is mostly
standalone, so move it into a separate file.
This patch also moves the PowerNV SR-IOV specific fields from pci_dn and
moves them into a platform specific structure. I'm not sure how they ended
up in there in the first place, but leaking platform specifics into common
code has proven to be a terrible idea so far so lets stop doing that.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-5-oohall@gmail.com
We pre-configure the m64 window for IODA1 as a 1-1 segment-PE mapping,
similar to PHB3. Currently the actual mapping of segments occurs in
pnv_ioda_pick_m64_pe(), but we can move it into pnv_ioda1_init_m64() and
drop the IODA1 specific code paths in the PE setup / teardown.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-4-oohall@gmail.com
There's an optimisation in the PE setup which skips performing DMA
setup for a PE if we only have bridges in a PE. The assumption being
that only "real" devices will DMA to system memory, which is probably
fair. However, if we start off with only bridge devices in a PE then
add a non-bridge device the new device won't be able to use DMA because
we never configured it.
Fix this (admittedly pretty weird) edge case by tracking whether we've done
the DMA setup for the PE or not. If a non-bridge device is added to the PE
(via rescan or hotplug, or whatever) we can set up DMA on demand.
This also means the only remaining user of the old "DMA Weight" code is
the IODA1 DMA setup code that it was originally added for, which is good.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-3-oohall@gmail.com
Currently we have these two functions:
pnv_pci_ioda2_release_dma_pe(), and
pnv_pci_ioda2_release_pe_dma()
The first is used when tearing down VF PEs and the other is used for normal
devices. There's very little difference between the two though. The latter
(non-VF) will skip a call to pnv_pci_ioda2_unset_window() unless
CONFIG_IOMMU_API=y is set. There's no real point in doing this so fold the
two together.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-2-oohall@gmail.com
Add a helper to go from a pci_bus structure to the pnv_phb that hosts
that bus. There's a lot of instances of the following pattern:
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
struct pnv_phb *phb = hose->private_data;
Without any other uses of the pci_controller inside the function. This
is hard to read since it requires you to memorise the contents of the
private data fields and kind of error prone since it involves blindly
assigning a void pointer. Add a helper to make it more concise and
explicit.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-1-oohall@gmail.com
The EEH core has a concept of a "PE tree" to support PowerNV. The PE tree
follows the PCI bus structures because a reset asserted on an upstream
bridge will be propagated to the downstream bridges. On pseries there's a
1-1 correspondence between what the guest sees are a PHB and a PE so the
"tree" is really just a single node.
Current the EEH core is reponsible for setting up this PE tree which it
does by traversing the pci_dn tree. The structure of the pci_dn tree
matches the bus tree on PowerNV which leads to the PE tree being "correct"
this setup method doesn't make a whole lot of sense and it's actively
confusing for the pseries case where it doesn't really do anything.
We want to remove the dependence on pci_dn anyway so this patch move
choosing where to insert a new PE into the platform code rather than
being part of the generic EEH code. For PowerNV this simplifies the
tree building logic and removes the use of pci_dn. For pseries we
keep the existing logic. I'm not really convinced it does anything
due to the 1-1 PE-to-PHB correspondence so every device under that
PHB should be in the same PE, but I'd rather not remove it entirely
until we've had a chance to look at it more deeply.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-14-oohall@gmail.com
This is mostly just to make the subsequent diffs less noisy. No functional
changes.
One thing that needs calling out is the removal of the "config_addr"
variable and replacing it with edev->bdfn. The contents of edev->bdfn are
the same, however it's worth pointing out that what RTAS calls a
"config_addr" isn't the same as the bdfn. The config_addr is supposed to
be: <bus><devfn><reg> with each field being an 8 bit number. Various parts
of the EEH code use BDFN and "config_addr" as interchangeable quantities
even though they aren't really.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-13-oohall@gmail.com
The naming of eeh_{add_to|remove_from}_parent_pe() doesn't really reflect
what they actually do. If the PE referred to be edev->pe_config_addr
already exists under that PHB then the edev is added to that PE. However,
if the PE doesn't exist the a new one is created for the edev.
The bulk of the implementation of eeh_add_to_parent_pe() covers that
second case. Similarly, most of eeh_remove_from_parent_pe() is
determining when it's safe to delete a PE.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-12-oohall@gmail.com
The edev->class_code field is never referenced anywhere except for the
platform specific probe functions. The same information is available in
the pci_dev for PowerNV and in the pci_dn on pseries so we can remove
the field.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-11-oohall@gmail.com
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-9-oohall@gmail.com
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-8-oohall@gmail.com
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-7-oohall@gmail.com
There's a bunch of strange things about this code. First up is that none of
the fields being written to are functional for a VF. The SR-IOV
specification lists then as "Reserved, but OS should preserve" so writing
new values to them doesn't do anything and is clearly wrong from a
correctness perspective.
However, since VFs are designed to be managed by the OS there is an
argument to be made that we should be saving and restoring some parts of
config space. We already sort of do that by saving the first 64 bytes of
config space in the eeh_dev (see eeh_dev->config_space[]). This is
inadequate since it doesn't even consider saving and restoring the PCI
capability structures. However, this is a problem with EEH in general and
that needs to be fixed for non-VF devices too.
There's no real reason to keep around this around so delete it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-6-oohall@gmail.com
This is used in precisely one place which is in pseries specific platform
code. There's no need to have the callback in eeh_ops since the platform
chooses the EEH PE addresses anyway. The PowerNV implementation has always
been a stub too so remove it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-5-oohall@gmail.com
The pci_dn->pe_number field is mainly used to track the IODA PE number of a
device on PowerNV. At some point it grew a user in the pseries SR-IOV
support which muddies the waters a bit, so remove it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-4-oohall@gmail.com
Drivers that do not support the PCI error handling callbacks are handled by
tearing down the device and re-probing them. If the device being removed is
a virtual function then we need to know the VF index so it can be removed
using the pci_iov_{add|remove}_virtfn() API.
Currently this is handled by looking up the pci_dn, and using the vf_index
that was stashed there when the pci_dn for the VF was created in
pcibios_sriov_enable(). We would like to eliminate the use of pci_dn
outside of pseries though so we need to provide the generic EEH code with
some other way to find the vf_index.
The easiest thing to do here is move the vf_index field out of pci_dn and
into eeh_dev. Currently pci_dn and eeh_dev are allocated and initialized
together so this is a fairly minimal change in preparation for splitting
pci_dn and eeh_dev in the future.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-3-oohall@gmail.com
The only thing in this file is eeh_dev_init() which is allocates and
initialises an eeh_dev based on a pci_dn. This is only ever called from
pci_dn.c so move it into there and remove the file.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-2-oohall@gmail.com
This function is a one line wrapper around eeh_phb_pe_create() and despite
the name it doesn't create any eeh_dev structures. Replace it with direct
calls to eeh_phb_pe_create() since that does what it says on the tin
and removes a layer of indirection.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-1-oohall@gmail.com
Power10 has removed 512 bytes boundary from match criteria i.e. the watch
range can cross 512 bytes boundary.
Note: ISA 3.1 Book III 9.4 match criteria includes 512 byte limit but that
is a documentation mistake and hopefully will be fixed in the next version
of ISA. Though, ISA 3.1 change log mentions about removal of 512B boundary:
Multiple DEAW:
Added a second Data Address Watchpoint. [H]DAR is
set to the first byte of overlap. 512B boundary is
removed.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-11-ravi.bangoria@linux.ibm.com
So far Book3S Powerpc supported only one watchpoint. Power10 is
introducing 2nd DAWR. Enable 2nd DAWR support for Power10.
Availability of 2nd DAWR will depend on CPU_FTR_DAWR1.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-10-ravi.bangoria@linux.ibm.com
2nd DAWR can be set/unset using H_SET_MODE hcall with resource value 5.
Enable powervm guest support with that. This has no effect on kvm guest
because kvm will return error if guest does hcall with resource value 5.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-9-ravi.bangoria@linux.ibm.com
Current H_SET_MODE hcall macro name for setting/resetting DAWR0 is
H_SET_MODE_RESOURCE_SET_DAWR. Add suffix 0 to macro name as well.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-8-ravi.bangoria@linux.ibm.com
As per the PAPR, bit 0 of byte 64 in pa-features property indicates
availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Host generally uses "cpu-features",
which masks "pa-features". But "cpu-features" are still not used for
guests and thus this change is mostly applicable for guests only.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-7-ravi.bangoria@linux.ibm.com
CPU_FTR_DAWR is by default enabled for host via CPU_FTRS_DT_CPU_BASE
(controlled by CONFIG_PPC_DT_CPU_FTRS). But cpu-features device-tree
node is not PAPR compatible and thus not yet used by kvm or pHyp
guests. Enable watchpoint functionality on power10 guest (both kvm
and powervm) by adding CPU_FTR_DAWR to CPU_FTRS_POWER10. Note that
this change does not enable 2nd DAWR support.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-5-ravi.bangoria@linux.ibm.com
'ea' returned by analyse_instr() needs to be aligned down to cache
block size for CACHEOP instructions. analyse_instr() does not set
size for CACHEOP, thus size also needs to be calculated manually.
Fixes: 27985b2a64 ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-4-ravi.bangoria@linux.ibm.com
Pedro Miraglia Franco de Carvalho noticed that on p8/p9, DAR value is
inconsistent with different type of load/store. Like for byte,word
etc. load/stores, DAR is set to the address of the first byte of
overlap between watch range and real access. But for quadword load/
store it's sometime set to the address of the first byte of real
access whereas sometime set to the address of the first byte of
overlap. This issue has been fixed in p10. In p10(ISA 3.1), DAR is
always set to the address of the first byte of overlap. Commit 27985b2a64
("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
wrongly assumes that DAR is set to the address of the first byte of
overlap for all load/stores on p8/p9 as well. Fix that. With the fix,
we now rely on 'ea' provided by analyse_instr(). If analyse_instr()
fails, generate event unconditionally on p8/p9, and on p10 generate
event only if DAR is within a DAWR range.
Note: 8xx is not affected.
Fixes: 27985b2a64 ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@br.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-3-ravi.bangoria@linux.ibm.com
Milton Miller reported that we are aligning start and end address to
wrong size SZ_512M. It should be SZ_512. Fix that.
While doing this change I also found a case where ALIGN() comparison
fails. Within a given aligned range, ALIGN() of two addresses does not
match when start address is pointing to the first byte and end address
is pointing to any other byte except the first one. But that's not true
for ALIGN_DOWN(). ALIGN_DOWN() of any two addresses within that range
will always point to the first byte. So use ALIGN_DOWN() instead of
ALIGN().
Fixes: e68ef121c1 ("powerpc/watchpoint: Use builtin ALIGN*() macros")
Reported-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-2-ravi.bangoria@linux.ibm.com
POWER6 only supports AMR update via privileged mode (MSR[PR] = 0,
SPRN_AMR=29) The PR=1 (userspace) alias for that SPR (SPRN_AMR=13) was
only supported from POWER7. Since we don't allow userspace modifying
of AMR value we should disable pkey support on P6 and before.
The hypervisor will still report pkey support via
"ibm,processor-storage-keys". Hence also check for P7 CPU_FTR bit to
decide on pkey support.
Fixes: f491fe3fb4 ("powerpc/book3s64/pkeys: Simplify the key initialization")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726132517.399076-1-aneesh.kumar@linux.ibm.com
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
When I "fixed" the ppc64e build in Nick's recent patch, I typoed the
CONFIG symbol, resulting in one that doesn't exist. Fix it to use the
correct symbol.
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131609.1640533-1-mpe@ellerman.id.au
ppc64_book3e_allmodconfig fails with:
arch/powerpc/lib/test_emulate_step.c: In function 'test_pld':
arch/powerpc/lib/test_emulate_step.c:113:7: error: implicit declaration of function 'cpu_has_feature'
113 | if (!cpu_has_feature(CPU_FTR_ARCH_31)) {
| ^~~~~~~~~~~~~~~
Add an include of cpu_has_feature.h to fix it.
Fixes: b6b54b4272 ("powerpc/sstep: Add tests for prefixed integer load/stores")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724004109.1461709-1-mpe@ellerman.id.au
From Nick's cover letter:
Linux powerpc new system call instruction and ABI
System Call Vectored (scv) ABI
==============================
The scv instruction is introduced with POWER9 / ISA3, it comes with an
rfscv counter-part. The benefit of these instructions is
performance (trading slower SRR0/1 with faster LR/CTR registers, and
entering the kernel with MSR[EE] and MSR[RI] left enabled, which can
reduce MSR updates. The scv instruction has 128 levels (not enough to
cover the Linux system call space).
Assignment and advertisement
----------------------------
The proposal is to assign scv levels conservatively, and advertise
them with HWCAP feature bits as we add support for more.
Linux has not enabled FSCR[SCV] yet, so executing the scv instruction
will cause the kernel to log a "SCV facility unavilable" message, and
deliver a SIGILL with ILL_ILLOPC to the process. Linux has defined a
HWCAP2 bit PPC_FEATURE2_SCV for SCV support, but does not set it.
This change allocates the zero level ('scv 0'), advertised with
PPC_FEATURE2_SCV, which will be used to provide normal Linux system
calls (equivalent to 'sc').
Attempting to execute scv with other levels will cause a SIGILL to be
delivered the same as before, but will not log a "SCV facility
unavailable" message (because the processor facility is enabled).
Calling convention
------------------
The proposal is for scv 0 to provide the standard Linux system call
ABI with the following differences from sc convention[1]:
- LR is to be volatile across scv calls. This is necessary because the
scv instruction clobbers LR. From previous discussion, this should
be possible to deal with in GCC clobbers and CFI.
- cr1 and cr5-cr7 are volatile. This matches the C ABI and would allow
the kernel system call exit to avoid restoring the volatile cr
registers (although we probably still would anyway to avoid
information leaks).
- Error handling: The consensus among kernel, glibc, and musl is to
move to using negative return values in r3 rather than CR0[SO]=1 to
indicate error, which matches most other architectures, and is
closer to a function call.
Notes
-----
- r0,r4-r8 are documented as volatile in the ABI, but the kernel patch
as submitted currently preserves them. This is to leave room for
deciding which way to go with these. Some small benefit was found by
preserving them[1] but I'm not convinced it's worth deviating from
the C function call ABI just for this. Release code should follow
the ABI.
Previous discussions:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/208691.htmlhttps://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209268.html
[1] https://github.com/torvalds/linux/blob/master/Documentation/powerpc/syscall64-abi.rst
[2] https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209263.html
POWER9 onwards the support for the registers HID1, HID4, HID5 has been
receded.
Although mfspr on the above registers worked in Power9, In Power10
simulator is unrecognized. Moving their assignment under the
check for machines lower than Power9
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721153708.89057-4-psampat@linux.ibm.com
Replace the variable name from using "pnv_first_spr_loss_level" to
"deep_spr_loss_state".
pnv_first_spr_loss_level is supposed to be the earliest state that
has OPAL_PM_LOSE_FULL_CONTEXT set, in other places the kernel uses the
"deep" states as terminology. Hence renaming the variable to be coherent
to its semantics.
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721153708.89057-3-psampat@linux.ibm.com
The POWER9 idle driver contains implementation-specific details that
means it is not suitable to run on any processor that implements ISA
v3.0 (e.g., POWER10), so only init the driver when running on a
POWER9.
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
[mpe: Use updated change log from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721153708.89057-2-psampat@linux.ibm.com
hash_low_64.S was removed in commit a43c0eb836 ("powerpc/mm: Convert
4k insert from asm to C") and flush_hash_page() is no longer called
from any assembly routine.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
[mpe: Tweak comment wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721091915.205006-1-santosh@fossix.org
On PAPR+ the hcall() on 0x1B0 is called H_DISABLE_AND_GET, but got
defined as H_DISABLE_AND_GETC instead.
This define was introduced with a typo in commit <b13a96cfb055>
("[PATCH] powerpc: Extends HCALL interface for InfiniBand usage"), and was
later used without having the typo noticed.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200707004812.190765-1-leobras.c@gmail.com
Both the ->dump method and snprintf return an int. So switch to an
int and properly handle errors from ->dump.
Fixes: 5456ffdee6 ("powerpc/spufs: simplify spufs core dumping")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200610085554.5647-1-hch@lst.de
Several device drivers hit EEH(Extended Error handling) when
triggering kdump on Pseries PowerVM. This patch implemented a reset of
the PHBs in pci general code when triggering kdump. PHB reset stop all
PCI transactions from normal kernel. We have tested the patch in
several enviroments:
- direct slot adapters
- adapters under the switch
- a VF adapter in PowerVM
- a VF adapter/adapter in KVM guest.
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
[mpe: Fix broken whitespace, subject & SOB formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594651173-32166-1-git-send-email-wenxiong@linux.vnet.ibm.com
powerpc return from interrupt and return from system call sequences
are context synchronising.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716013522.338318-1-npiggin@gmail.com
This primitive has been renamed, but because it was spelled incorrectly in the
first place it must have escaped the fixup patch. As far as I can tell this
logic is still correct: smp_mb__after_spinlock() uses the default smp_mb()
implementation, which is "sync" rather than "hwsync" but those are the same
(though I'm not that familiar with PowerPC).
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716193820.1141936-1-palmer@dabbelt.com
retrieve prefix instruction operands RA and pc relative bit R values
using macros and adopt it in sstep.c and test_emulate_step.c.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626095158.1031507-4-bala24@linux.ibm.com
testcases for `paddi` instruction to cover the negative case,
if R is equal to 1 and RA is not equal to 0, the instruction
form is invalid.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626095158.1031507-3-bala24@linux.ibm.com
add provision to declare test is a negative scenario, verify
whether emulation fails and avoid executing it.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626095158.1031507-2-bala24@linux.ibm.com
Currently prefixed instructions are dumped as two separate word
instructions. Use mread_instr() so that prefixed instructions are read
as such and update the incrementor in the loop to take this into
account.
'dump_func' is print_insn_powerpc() which comes from ppc-dis.c which is
taken from binutils. When this is updated prefixed instructions will be
disassembled.
Currently dumping prefixed instructions looks like this:
0:mon> di c000000000094168
c000000000094168 0x06000000 .long 0x6000000
c00000000009416c 0x392a0003 addi r9,r10,3
c000000000094170 0x913f0028 stw r9,40(r31)
c000000000094174 0xe93f002a lwa r9,40(r31)
c000000000094178 0x7d234b78 mr r3,r9
c00000000009417c 0x383f0040 addi r1,r31,64
c000000000094180 0xebe1fff8 ld r31,-8(r1)
c000000000094184 0x4e800020 blr
c000000000094188 0x60000000 nop
...
c000000000094190 0x3c4c0121 addis r2,r12,289
c000000000094194 0x38429670 addi r2,r2,-27024
c000000000094198 0x7c0802a6 mflr r0
c00000000009419c 0x60000000 nop
c0000000000941a0 0xe9240100 ld r9,256(r4)
c0000000000941a4 0x39400001 li r10,1
After this it looks like:
0:mon> di c000000000094168
c000000000094168 0x06000000 0x392a0003 .long 0x392a000306000000
c000000000094170 0x913f0028 stw r9,40(r31)
c000000000094174 0xe93f002a lwa r9,40(r31)
c000000000094178 0x7d234b78 mr r3,r9
c00000000009417c 0x383f0040 addi r1,r31,64
c000000000094180 0xebe1fff8 ld r31,-8(r1)
c000000000094184 0x4e800020 blr
c000000000094188 0x60000000 nop
...
c000000000094190 0x3c4c0121 addis r2,r12,289
c000000000094194 0x38429570 addi r2,r2,-27280
c000000000094198 0x7c0802a6 mflr r0
c00000000009419c 0x60000000 nop
c0000000000941a0 0xe9240100 ld r9,256(r4)
c0000000000941a4 0x39400001 li r10,1
c0000000000941a8 0x3d02000b addis r8,r2,11
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602052728.18227-2-jniethe5@gmail.com
There are quite a few places where instructions are printed, this is
done using a '%x' format specifier. With the introduction of prefixed
instructions, this does not work well. Currently in these places,
ppc_inst_val() is used for the value for %x so only the first word of
prefixed instructions are printed.
When the instructions are word instructions, only a single word should
be printed. For prefixed instructions both the prefix and suffix should
be printed. To accommodate both of these situations, instead of a '%x'
specifier use '%s' and introduce a helper, __ppc_inst_as_str() which
returns a char *. The char * __ppc_inst_as_str() returns is buffer that
is passed to it by the caller.
It is cumbersome to require every caller of __ppc_inst_as_str() to now
declare a buffer. To make it more convenient to use __ppc_inst_as_str(),
wrap it in a macro that uses a compound statement to allocate a buffer
on the caller's stack before calling it.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Drop 0x prefix to match most existings uses, especially xmon]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602052728.18227-1-jniethe5@gmail.com
Use the existing support for testing compute type instructions to test
Prefixed Add Immediate (paddi). The R bit of the paddi instruction
controls whether current instruction address is used. Add test cases
for when R=1 and for R=0. paddi has a 34 bit immediate field formed by
concatenating si0 and si1. Add tests for the extreme values of this
field.
Skip the paddi tests if ISA v3.1 is unsupported.
Some of these test cases were added by Balamuruhan S.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix conflicts with ppc-opcode.h changes, squash in .balign]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-5-jniethe5@gmail.com
An a array of struct compute_test's are used to declare tests for
compute instructions. Add a cpu_feature field to struct compute_test as
an optional way to specify a cpu feature that must be present. If not
present then skip the test.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-4-jniethe5@gmail.com
The tests for emulation of compute instructions execute and
emulate an instruction and then compare the results to verify the
emulation. In ISA v3.1 there are instructions that operate relative to
the NIP. Therefore set the NIP in the regs used for the emulated
instruction to the location of the executed instruction so they will
give the same result.
This is a rework of a patch by Balamuruhan S.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-3-jniethe5@gmail.com
Add tests for the prefixed versions of the floating-point load/stores
that are currently tested. This includes the following instructions:
* Prefixed Load Floating-Point Single (plfs)
* Prefixed Load Floating-Point Double (plfd)
* Prefixed Store Floating-Point Single (pstfs)
* Prefixed Store Floating-Point Double (pstfd)
Skip the new tests if ISA v3.10 is unsupported.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix conflicts with ppc-opcode.h changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-2-jniethe5@gmail.com
Add tests for the prefixed versions of the integer load/stores that
are currently tested. This includes the following instructions:
* Prefixed Load Doubleword (pld)
* Prefixed Load Word and Zero (plwz)
* Prefixed Store Doubleword (pstd)
Skip the new tests if ISA v3.1 is unsupported.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix conflicts with ppc-opcode.h changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-1-jniethe5@gmail.com
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu'
structure. For historical reasons, many kvm-related function parameters
retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This
patch does a unified cleanup of these remaining redundant parameters.
[paulus@ozlabs.org - Fixed places that were missed in book3s_interrupts.S]
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Add support for the scv instruction on POWER9 and later CPUs.
For now this implements the zeroth scv vector 'scv 0', as identical to
'sc' system calls, with the exception that LR is not preserved, nor
are volatile CR registers, and error is not indicated with CR0[SO],
but by returning a negative errno.
rfscv is implemented to return from scv type system calls. It can not
be used to return from sc system calls because those are defined to
preserve LR.
getpid syscall throughput on POWER9 is improved by 26% (428 to 318
cycles), largely due to reducing mtmsr and mtspr.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix ppc64e build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611081203.995112-3-npiggin@gmail.com
The scv instruction causes an interrupt which can enter the kernel with
MSR[EE]=1, thus allowing interrupts to hit at any time. These must not
be taken as normal interrupts, because they come from MSR[PR]=0 context,
and yet the kernel stack is not yet set up and r13 is not set to the
PACA).
Treat this as a soft-masked interrupt regardless of the soft masked
state. This does not affect behaviour yet, because currently all
interrupts are taken with MSR[EE]=0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611081203.995112-2-npiggin@gmail.com
PowerISA v3.1 has few updates for the Branch History Rolling
Buffer(BHRB).
BHRB disable is controlled via Monitor Mode Control Register A (MMCRA)
bit, namely "BHRB Recording Disable (BHRBRD)". This field controls
whether BHRB entries are written when BHRB recording is enabled by
other bits. This patch implements support for this BHRB disable bit.
By setting 0b1 to this bit will disable the BHRB and by setting 0b0 to
this bit will have BHRB enabled. This addresses backward
compatibility (for older OS), since this bit will be cleared and
hardware will be writing to BHRB by default.
This patch addresses changes to set MMCRA (BHRBRD) at boot for
power10 (there by the core will run faster) and enable this feature
only on runtime ie, on explicit need from user. Also save/restore
MMCRA in the restore path of state-loss idle state to make sure we
keep BHRB disabled if it was not enabled on request at runtime.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-12-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 introduce filtering support for
PERF_SAMPLE_BRANCH_IND_CALL/COND. The patch adds BHRB filter
support for "ind_call" and "cond" in power10_bhrb_filter_map().
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-11-git-send-email-atrajeev@linux.vnet.ibm.com
Commit bb19af8160 ("powerpc/perf: Prevent kernel address leak to
userspace via BHRB buffer") added a check in bhrb_read() to filter
the kernel address from BHRB buffer. This patch modified it to avoid
that check for PowerISA v3.1 based processors, since PowerISA v3.1
allows only MSR[PR]=1 address to be written to BHRB buffer.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-10-git-send-email-atrajeev@linux.vnet.ibm.com
Base enablement patch to register performance monitoring hardware
support for power10. Patch introduce the raw event encoding format,
defines the supported list of events, config fields for the event
attributes and their corresponding bit values which are exported via
sysfs.
Patch also enhances the support function in isa207_common.c to include
power10 pmu hardware.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-9-git-send-email-atrajeev@linux.vnet.ibm.com
Add Power10 feature function to DT CPU features, along with a Power10
specific init() to initialize PMU SPRs, sets the oprofile_cpu_type and
cpu_features. This will enable performance monitoring unit (PMU) for
Power10 in CPU features with "performance-monitor-power10".
For Power ISA v3.1, BHRB disable is controlled via Monitor Mode
Control Register A (MMCRA) bit, namely "BHRB Recording
Disable (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB
feature at boot for Power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Move MMCRA_BHRB_DISABLE as noted by jpn, drop CPU setup changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-8-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 added three new perfromance
monitoring unit (PMU) speical purpose register (SPR).
They are Monitor Mode Control Register 3 (MMCR3),
Sampled Instruction Event Register 2 (SIER2),
Sampled Instruction Event Register 3 (SIER3).
Patch here adds a new dump function dump_310_sprs
to print these SPR values.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-7-git-send-email-atrajeev@linux.vnet.ibm.com
Power ISA v3.1 has added new performance monitoring unit (PMU) special
purpose registers (SPRs). They are:
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register A (SIER2)
Sampled Instruction Event Register B (SIER3)
Add support to save/restore these new SPRs while entering/exiting
guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3.
Add new SPRs to KVM API documentation.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-6-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 includes new performance monitoring unit(PMU)
special purpose registers (SPRs). They are
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register 2 (SIER2)
Sampled Instruction Event Register 3 (SIER3)
MMCR3 is added for further sampling related configuration
control. SIER2/SIER3 are added to provide additional
information about the sampled instruction.
Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of
these new SPRs, updates the struct thread_struct to include these new
SPRs, include MMCR3 in struct mmcr_regs. This is needed to support
programming of MMCR3 SPR during event_enable/disable. Patch also adds
the sysfs support for the MMCR3 SPR along with SPRN_ macros for these
new pmu SPRs.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Rename to PPMU_ARCH_31 as noted by jpn]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-5-git-send-email-atrajeev@linux.vnet.ibm.com
Events of type PERF_TYPE_HW_CACHE was described for Power PMU
as: int (*cache_events)[type][op][result];
where type, op, result values unpacked from the event attribute config
value is used to generate the raw event code at runtime.
So far the event code values which used to create these cache-related
events were within 32 bit and `int` type worked. In power10,
some of the event codes are of 64-bit value and hence update the
Power PMU cache_events to `u64` type in `power_pmu` struct.
Also propagate this change to existing all PMU driver code paths
which are using ppmu->cache_events.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-4-git-send-email-atrajeev@linux.vnet.ibm.com
Currently `kvm_vcpu_arch` stores all Monitor Mode Control registers
in a flat array in order: mmcr0, mmcr1, mmcra, mmcr2, mmcrs
Split this to give mmcra and mmcrs its own entries in vcpu and
use a flat array for mmcr0 to mmcr2. This patch implements this
cleanup to make code easier to read.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Fix MMCRA/MMCR2 uapi breakage as noted by paulus]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-3-git-send-email-atrajeev@linux.vnet.ibm.com
PowerPC always re-builds DTB even if nothing has been changed.
As for other architectures, arch/*/boot/dts/Makefile builds DTB by
using the dtb-y syntax.
In contrast, arch/powerpc/boot/dts/(fsl/)Makefile does nothing unless
CONFIG_OF_ALL_DTBS is defined. Instead, arch/powerpc/boot/Makefile
builds DTB on demand. You need to add DTB to 'targets' explicitly
so .*.cmd files are included.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
core-book3s currently uses array to store the MMCR registers as part
of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct`
to store mmcr regs instead of array. This will make code easier to read
and reduces chance of any subtle bug that may come in the future, say
when new registers are added. Patch updates all relevant code that was
using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`.
This includes the PMU driver code for supported platforms (power5
to power9) and ISA macros for counter support functions.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com
Compilation error:
arch/powerpc/perf/perf_regs.c:80:undefined reference to `.is_sier_available'
Currently is_sier_available() is part of core-book3s.c, which is added
to build based on CONFIG_PPC_PERF_CTRS.
A config with CONFIG_PERF_EVENTS and without CONFIG_PPC_PERF_CTRS will
have a build break because of missing is_sier_available().
In practice it only breaks when CONFIG_FSL_EMB_PERF_EVENT=n because
that also guards the usage of is_sier_available(). That only happens
with CONFIG_PPC_BOOK3E_64=y and CONFIG_FSL_SOC_BOOKE=n.
Patch adds is_sier_available() in asm/perf_event.h to fix the build
break for configs missing CONFIG_PPC_PERF_CTRS.
Fixes: 333804dc3b ("powerpc/perf: Update perf_regs structure to include SIER")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add detail about CONFIG_FSL_SOC_BOOKE]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200614083604.302611-1-maddy@linux.ibm.com
The subpage_prot syscall was added for specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so disable it by default.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-4-npiggin@gmail.com
ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.
We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).
- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
so applications would get a failure at mmap() time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com
This comment is wrong, we wouldn't use calc_vm_prot_bits() here
because we are being called by calc_vm_prot_bits() to modify its
behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-2-npiggin@gmail.com
Both of those functions are only called from 64-bit only code, so the
stubs should not be needed at all.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200717112714.19304-1-yuehaibing@huawei.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200718103958.5455-1-grandmaster@al2klimov.de
Currently the spu coredump code triggers an RCU warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc3-01755-g7cd49f0b7ec7 #1 Not tainted
-----------------------------
include/linux/fdtable.h:95 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by spu-coredump/1343:
#0: c0000007fa22f430 (sb_writers#2){.+.+}-{0:0}, at: .do_coredump+0x1010/0x13c8
stack backtrace:
CPU: 0 PID: 1343 Comm: spu-coredump Not tainted 5.7.0-rc3-01755-g7cd49f0b7ec7 #1
Call Trace:
.dump_stack+0xec/0x15c (unreliable)
.lockdep_rcu_suspicious+0x120/0x144
.coredump_next_context+0x148/0x158
.spufs_coredump_extra_notes_size+0x54/0x190
.elf_coredump_extra_notes_size+0x34/0x50
.elf_core_dump+0xe48/0x19d0
.do_coredump+0xe50/0x13c8
.get_signal+0x864/0xd88
.do_notify_resume+0x158/0x3c8
.interrupt_exit_user_prepare+0x19c/0x208
interrupt_return+0x14/0x1c0
This comes from fcheck_files() via fcheck().
It's pretty clearly documented that fcheck() must be wrapped with
rcu_read_lock(), adding that fixes the RCU warning.
hch points out that once we've released the RCU read lock the file may
be closed and freed, which would leave us with a pointer to a freed
spu_context.
To avoid that, take a reference to the spu_context while we hold the
RCU read lock, and drop that reference later once we're done with the
context.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508130633.2532759-1-mpe@ellerman.id.au
There is only one caller to this function and the function is wrongly
named. Avoid further confusion w.r.t name and open code this at the
only call site. Also remove read_uamor(). There are no users for
the same after this.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-24-aneesh.kumar@linux.ibm.com
The kvm_vcpu_read_guest/kvm_vcpu_write_guest used for nested guests
eventually call srcu_dereference_check to dereference a memslot and
lockdep produces a warning as neither kvm->slots_lock nor
kvm->srcu lock is held and kvm->users_count is above zero (>100 in fact).
This wraps mentioned VCPU read/write helpers in srcu read lock/unlock as
it is done in other places. This uses vcpu->srcu_idx when possible.
These helpers are only used for nested KVM so this may explain why
we did not see these before.
Here is an example of a warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc3-le_dma-bypass.3.2_a+fstn1 #897 Not tainted
-----------------------------
include/linux/kvm_host.h:633 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-system-ppc/2752:
#0: c000200359016be0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x144/0xd80 [kvm]
stack backtrace:
CPU: 80 PID: 2752 Comm: qemu-system-ppc Not tainted 5.7.0-rc3-le_dma-bypass.3.2_a+fstn1 #897
Call Trace:
[c0002003591ab240] [c000000000b23ab4] dump_stack+0x190/0x25c (unreliable)
[c0002003591ab2b0] [c00000000023f954] lockdep_rcu_suspicious+0x140/0x164
[c0002003591ab330] [c008000004a445f8] kvm_vcpu_gfn_to_memslot+0x4c0/0x510 [kvm]
[c0002003591ab3a0] [c008000004a44c18] kvm_vcpu_read_guest+0xa0/0x180 [kvm]
[c0002003591ab410] [c008000004ff9bd8] kvmhv_enter_nested_guest+0x90/0xb80 [kvm_hv]
[c0002003591ab980] [c008000004fe07bc] kvmppc_pseries_do_hcall+0x7b4/0x1c30 [kvm_hv]
[c0002003591aba10] [c008000004fe5d30] kvmppc_vcpu_run_hv+0x10a8/0x1a30 [kvm_hv]
[c0002003591abae0] [c008000004a5d954] kvmppc_vcpu_run+0x4c/0x70 [kvm]
[c0002003591abb10] [c008000004a56e54] kvm_arch_vcpu_ioctl_run+0x56c/0x7c0 [kvm]
[c0002003591abba0] [c008000004a3ddc4] kvm_vcpu_ioctl+0x4ac/0xd80 [kvm]
[c0002003591abd20] [c0000000006ebb58] ksys_ioctl+0x188/0x210
[c0002003591abd70] [c0000000006ebc28] sys_ioctl+0x48/0xb0
[c0002003591abdb0] [c000000000042764] system_call_exception+0x1d4/0x2e0
[c0002003591abe20] [c00000000000cce8] system_call_common+0xe8/0x214
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
