Commit Graph

79 Commits

Author SHA1 Message Date
Heikki Krogerus
19aab56c7f usb: musb: Fix handling of spurious SESSREQ
Rely on VBUS being valid on top off B device.

Signed-off-by: Heikki Krogerus <heikki.krogerus@nokia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:17:35 +02:00
Ming Lei
b212091474 usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time
musb driver still may write MUSB_DEVCTL register after clock is disabled
in musb_platform_exit, which may cause the kernel oops[1] when musb_hdrc
module is loaded for the 2nd time.

The patch fixes the kernel oops in this case.

[1] kernel oops when loading musb_hdrc module for the 2nd time

[   93.380279] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5
[   93.387847] bus: 'platform': add driver musb_hdrc
[   93.388153] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc
[   93.388183] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc
[   93.405090] HS USB OTG: revision 0x33, sysconfig 0x2010, sysstatus 0x1, intrfsel 0x1, simenable  0x0
[   93.405364] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[   93.405395] musb_hdrc: MHDRC RTL version 1.400
[   93.405426] musb_hdrc: setup fifo_mode 3
[   93.405456] musb_hdrc: 7/31 max ep, 3648/16384 memory
[   93.405487] musb_core_init 1524: musb_hdrc: hw_ep 0shared, max 64
[   93.405487] musb_core_init 1524: musb_hdrc: hw_ep 1tx, doublebuffer, max 512
[   93.405517] musb_core_init 1533: musb_hdrc: hw_ep 1rx, doublebuffer, max 512
[   93.405548] musb_core_init 1524: musb_hdrc: hw_ep 2tx, max 512
[   93.405578] musb_core_init 1533: musb_hdrc: hw_ep 2rx, max 512
[   93.405578] musb_core_init 1524: musb_hdrc: hw_ep 3shared, max 256
[   93.405609] musb_core_init 1524: musb_hdrc: hw_ep 4shared, max 256
[   93.405853] musb_platform_try_idle 133: b_idle inactive, for idle timer for 7 ms
[   93.405944] device: 'gadget': device_add
[   93.406921] PM: Adding info for No Bus:gadget
[   93.406951] musb_init_controller 2136: OTG mode, status 0, dev80
[   93.407379] musb_do_idle 51: musb_do_idle: state=1
[   93.408233] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[   93.416656] driver: 'musb_hdrc': driver_bound: bound to device 'musb_hdrc'
[   93.416687] bus: 'platform': really_probe: bound device musb_hdrc to driver musb_hdrc
[  124.486938] bus: 'platform': remove driver musb_hdrc
[  124.490509] twl4030_usb twl4030_usb: twl4030_phy_suspend
[  124.491424] device: 'gadget': device_unregister
[  124.491424] PM: Removing info for No Bus:gadget
[  124.495269]  gadget: musb_gadget_release
[  124.498992] driver: 'musb_hdrc': driver_release
[  129.569366] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5
[  129.576934] bus: 'platform': add driver musb_hdrc
[  129.577209] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc
[  129.577239] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc
[  129.592651] twl4030_usb twl4030_usb: twl4030_phy_resume
[  129.592681] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab404
[  129.600830] Internal error: : 1028 []
[  129.604858] last sysfs file: /sys/devices/platform/i2c_omap.3/i2c-3/i2c-dev/i2c-3/dev
[  129.613067] Modules linked in: musb_hdrc(+) [last unloaded: musb_hdrc]
[  129.619964] CPU: 0    Not tainted  (2.6.36-next-20101021+ )
[  129.626281] PC is at musb_platform_init+0xb0/0x1c8 [musb_hdrc]
[  129.632415] LR is at mark_held_locks+0x64/0x94
[  129.637084] pc : [<bf032198>]    lr : [<c00ad7c4>]    psr: 20000013
[  129.637084] sp : c6d5fcb0  ip : c6d5fc38  fp : c6d5fcd4
[  129.649139] r10: c6e72180  r9 : fa0ab000  r8 : c05612e8
[  129.654602] r7 : 0000005c  r6 : c0559cc8  r5 : c6e72180  r4 : c0561548
[  129.661468] r3 : 04d60047  r2 : fa0ab000  r1 : c07169d8  r0 : 00000000
[  129.668304] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  129.675811] Control: 10c5387d  Table: 86e4c019  DAC: 00000015
[  129.681823] Process insmod (pid: 554, stack limit = 0xc6d5e2f0)
[  129.688049] Stack: (0xc6d5fcb0 to 0xc6d60000)
[  129.692626] fca0:                                     fa0ab000 c0555c54 c6d5fcd4 c0561548
[  129.701202] fcc0: 00000003 c05612e0 c6d5fe04 c6d5fcd8 bf03140c bf0320f4 c6d5fd9c c6d5fce8
[  129.709808] fce0: c015cb94 c041448c c06d9d10 ffffffff c6d5fd14 c6d5fd00 c00adbec c6d5fd40
[  129.718383] fd00: c015d478 c6d5fdb0 c6d5fd24 c00a9d18 c6d5e000 60000013 bf02a4ac c05612bc
[  129.726989] fd20: c0414fb4 c00a9cf0 c6d5fd54 c6d5fd38 c015bbdc c0244280 c6e8b7b0 c7929330
[  129.735565] fd40: c6d5fdb0 c6d5fdb0 c6d5fd7c c6e7227c c015c010 c015bb90 c015c2ac c6d5fdb0
[  129.744171] fd60: c7929330 c6d5fdb0 c7929330 c6e8b7b0 c6d5fd9c 00000000 c7929330 c6e8b7b0
[  129.752746] fd80: c6d5fdb0 00000000 00000001 00000000 c6d5fde4 c6d5fda0 c015d478 c015cb74
[  129.761322] fda0: c056138c 00000000 c6d5fdcc c6d5fdb8 c7929330 00000000 c056138c c05612e8
[  129.769927] fdc0: 00000000 c05612f0 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fdf4 c05612e8
[  129.778503] fde0: c05612e8 bf02a2e4 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fe14 c6d5fe08
[  129.787109] fe00: c029a398 bf0311c8 c6d5fe4c c6d5fe18 c0299120 c029a384 c7919140 22222222
[  129.795684] fe20: c6d5fe4c c05612e8 c056131c bf02a2e4 c0299278 c06f6e00 c73217c0 00000000
[  129.804290] fe40: c6d5fe6c c6d5fe50 c0299314 c0299020 00000000 c6d5fe70 bf02a2e4 c0299278
[  129.812866] fe60: c6d5fe94 c6d5fe70 c02987d4 c0299284 c7825060 c78c6618 00000000 bf02a2e4
[  129.821441] fe80: c06e4c98 00000000 c6d5fea4 c6d5fe98 c0298ea4 c0298778 c6d5fedc c6d5fea8
[  129.830047] fea0: c0297f84 c0298e8c bf02716c 000b9008 bf02a2e4 bf02a2d0 000b9008 bf02a2e4
[  129.838623] fec0: 00000000 c06f6e00 bf031000 00000000 c6d5fefc c6d5fee0 c0299614 c0297ec0
[  129.847229] fee0: bf02a2d0 000b9008 bf02a388 00000000 c6d5ff0c c6d5ff00 c029a868 c02995a8
[  129.855804] ff00: c6d5ff24 c6d5ff10 c029a88c c029a818 0010281c 000b9008 c6d5ff34 c6d5ff28
[  129.864410] ff20: bf03104c c029a878 c6d5ff7c c6d5ff38 c00463dc bf03100c 00000000 00000000
[  129.872985] ff40: 00000000 0010281c 000b9008 bf02a388 00000000 0010281c 000b9008 bf02a388
[  129.881591] ff60: 00000000 c00521c8 c6d5e000 00000000 c6d5ffa4 c6d5ff80 c00bb9b8 c00463ac
[  129.890167] ff80: c00adc88 c00ada68 00097e8e bebbfcf4 0010281c 00000080 00000000 c6d5ffa8
[  129.898742] ffa0: c0052000 c00bb908 00097e8e bebbfcf4 402c9008 0010281c 000b9008 bebbfe5a
[  129.907348] ffc0: 00097e8e bebbfcf4 0010281c 00000080 00000014 bebbfcf4 bebbfe06 0000005b
[  129.915924] ffe0: bebbf9a0 bebbf990 0001a108 40263ec0 60000010 402c9008 011b0000 0000007c
[  129.924499] Backtrace:
[  129.927185] [<bf0320e8>] (musb_platform_init+0x0/0x1c8 [musb_hdrc]) from [<bf03140c>] (musb_probe+0x250/0xf2c [musb_hdrc])
[  129.938781]  r6:c05612e0 r5:00000003 r4:c0561548
[  129.943695] [<bf0311bc>] (musb_probe+0x0/0xf2c [musb_hdrc]) from [<c029a398>] (platform_drv_probe+0x20/0x24)
[  129.954040] [<c029a378>] (platform_drv_probe+0x0/0x24) from [<c0299120>] (driver_probe_device+0x10c/0x264)
[  129.964172] [<c0299014>] (driver_probe_device+0x0/0x264) from [<c0299314>] (__driver_attach+0x9c/0xa0)
[  129.973968] [<c0299278>] (__driver_attach+0x0/0xa0) from [<c02987d4>] (bus_for_each_dev+0x68/0x94)
[  129.983367]  r7:c0299278 r6:bf02a2e4 r5:c6d5fe70 r4:00000000
[  129.989349] [<c029876c>] (bus_for_each_dev+0x0/0x94) from [<c0298ea4>] (driver_attach+0x24/0x28)
[  129.998565]  r7:00000000 r6:c06e4c98 r5:bf02a2e4 r4:00000000
[  130.004547] [<c0298e80>] (driver_attach+0x0/0x28) from [<c0297f84>] (bus_add_driver+0xd0/0x274)
[  130.013671] [<c0297eb4>] (bus_add_driver+0x0/0x274) from [<c0299614>] (driver_register+0x78/0x158)
[  130.023101] [<c029959c>] (driver_register+0x0/0x158) from [<c029a868>] (platform_driver_register+0x5c/0x60)
[  130.033325]  r7:00000000 r6:bf02a388 r5:000b9008 r4:bf02a2d0
[  130.039276] [<c029a80c>] (platform_driver_register+0x0/0x60) from [<c029a88c>] (platform_driver_probe+0x20/0xa8)
[  130.050018] [<c029a86c>] (platform_driver_probe+0x0/0xa8) from [<bf03104c>] (musb_init+0x4c/0x54 [musb_hdrc])
[  130.060424]  r5:000b9008 r4:0010281c
[  130.064239] [<bf031000>] (musb_init+0x0/0x54 [musb_hdrc]) from [<c00463dc>] (do_one_initcall+0x3c/0x1c0)
[  130.074218] [<c00463a0>] (do_one_initcall+0x0/0x1c0) from [<c00bb9b8>] (sys_init_module+0xbc/0x1d0)
[  130.083709] [<c00bb8fc>] (sys_init_module+0x0/0x1d0) from [<c0052000>] (ret_fast_syscall+0x0/0x3c)
[  130.093109]  r7:00000080 r6:0010281c r5:bebbfcf4 r4:00097e8e
[  130.099090] Code: 0a000046 e3a01001 e12fff33 e59520e4 (e5923404)
[  130.105621] ---[ end trace 1d0bd69deb79164d ]---

Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: stable@kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:16:32 +02:00
Bob Liu
32d5dc9520 USB: musb: pm: don't rely fully on clock support
Since clock support is optional across processors, don't make the whole
musb pm paths depend upon it.  Just conditionalize the clock accesses.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:08:15 +02:00
Grazvydas Ignotas
120d074c58 usb: musb: don't leave PHY enabled on shutdown()
Some actions like musb_platform_exit are only performed on module
removal and not on shutdown, which results in PHY being left enabled
on reboot at least. This is sometimes causing strange failures after
reboot (observed on OMAP3 pandora board), when DEVCTL does not report
VBUS state correctly due to unknown reasons (possibly because of
communication issues between musb IP and PHY). Running
musb_platform_exit before reset seems to resolve that issue.

Move some exit code from musb_remove() to musb_shutdown() so that it
is performed on both module removal and shutdown/reset. Also convert
the host check so that it doesn't need #ifdef.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:48:09 +02:00
Ajay Kumar Gupta
843bb1d0ff USB: musb: AM35x: Workaround for fifo read issue
AM35x supports only 32bit read operations so we need to have
workaround for 8bit and 16bit read operations.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:22:17 -07:00
Sergei Shtylyov
f405387435 USB: MUSB: fix kernel WARNING/oops when unloading module in OTG mode
Since commit 461972d8a4 (musb_core: don't call
musb_platform_exit() twice), unloading the driver module results in a WARNING
"kobject: '(null)' (c73de788): is not initialized, yet kobject_put() is being
called." (or even kernel oops) on e.g. DaVincis, though only in the OTG mode.
There exists dubious and unbalanced put_device() call in musb_free() which
takes place only in the OTG mode.  As this commit caused musb_platform_exit()
to be called (and so unregister the NOP transceiver) before this put_device()
call, this function references already freed memory.

On the other hand, all the glue layers miss the otg_put_transceiver() call,
complementary to the otg_get_transceiver() call that they do.  So, I think
the solution is to get rid of the strange put_device() call, and instead
call otg_put_transceiver() in the glue layers...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:21:58 -07:00
Heikki Krogerus
a6038ee76a usb: musb: ignore spurious SESSREQ interrupts
This will ignore any SESSREQ interrupt if musb is B state.
Charger detection may cause spurious SESSREQ interrupts.

Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:21:55 -07:00
Bob Liu
ae9b2ad2ee usb: musb: Change to direct addr in context save/restore
Since not all platforms are using the same offset 0x10 in
musb_save/restore_context() eg Blackfin the offset is 0x40,
Change the indexed address to direct.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:21:54 -07:00
Ajay Kumar Gupta
d709d22eea USB: musb: fix compilation warning in host only mode
Fixes below compilation warning when host only configuration is
selected.
drivers/usb/musb/musb_core.c: In function 'musb_stage0_irq':
drivers/usb/musb/musb_core.c:711: warning: unused variable 'mbase'

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 14:35:38 -07:00
Mike Frysinger
f2263db74a USB: musb: fix Blackfin ulpi stubs
The new ulpi code defines fallback stubs for the Blackfin arch, but does
so incorrectly leading to a build failure:
drivers/usb/musb/musb_core.c:227: error: 'musb_ulpi_read' undeclared here (not in a function)
drivers/usb/musb/musb_core.c:228: error: 'musb_ulpi_write' undeclared here (not in a function)

Tweak the fallback stubs so that they do work as intended.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:16:07 -07:00
Sergei Shtylyov
7d9645fdca USB: musb_core: make disconnect and suspend interrupts work again
Commit 1c25fda4a0 (usb: musb: handle irqs in the
order dictated by programming guide) forgot to get rid of the old 'STAGE0_MASK'
filter for calling musb_stage0_irq(), so now disconnect and suspend interrupts
are effectively ignored...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:16:06 -07:00
Maulik Mankad
2bb14cbf04 usb: musb: Fix a bug by making suspend interrupt available in device mode
As a part of aligning the ISR code for MUSB with the specs, the
ISR code was re-written. 

See Commit 1c25fda4a0 (usb: musb: handle 
irqs in the order dictated by programming guide)

With this the suspend interrupt came accidently under CONFIG_USB_MUSB_HDRC_HCD.

The fix brings suspend interrupt handling outside 
CONFIG_USB_MUSB_HDRC_HCD.

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: stable <stable@kernel.org> [.34]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:16:05 -07:00
Heikki Krogerus
ffb865b1e4 usb: musb: add ulpi access operations
This adds helper functions for ULPI access, and implements
otg_io_access_ops for musb.

Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:36 -07:00
Felipe Balbi
b0f9da7e02 usb: musb: debugfs: musb_exit_debugfs() can be called on probe
when we fail to probe(), we can call musb_exit_debugfs().
Allow that by removing section annotations.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:35 -07:00
Felipe Balbi
7f7f9e2a5a usb: musb: add debugfs support
for now only a simple register dump entry (which can
be rather useful on debugging) and a way to start
test modes.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:32 -07:00
Maulik Mankad
fb9c58edf1 USB: MUSB: Add OMAP4 support in MUSB driver
This patch adds CONFIG_ARCH_OMAP4 macro within
MUSB driver.

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:32 -07:00
Maulik Mankad
de2e1b0c98 usb: musb: Set transceiver interface type
Program the OTG_INTERFSEL register based on
transcevier type passed from board file.

Adapt signature of musb_platform_init() function
for davinci, blackfin and tusb6010.

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:32 -07:00
Felipe Balbi
e6c213b296 usb: musb: allow board to pass down fifo mode
boards might want to optimize their fifo configuration
to the particular needs of that specific board. Allow
that by moving all related data structures to
<linux/usb/musb.h>

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:31 -07:00
Alan Stern
749da5f82f USB: straighten out port feature vs. port status usage
This patch (as1349b) clears up the confusion in many USB host
controller drivers between port features and port statuses.  In mosty
cases it's true that the status bit is in the position given by the
corresponding feature value, but that's not always true and it's not
guaranteed in the USB spec.

There's no functional change, just replacing expressions of the form
(1 << USB_PORT_FEAT_x) with USB_PORT_STAT_x, which has the same value.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:31 -07:00
Sergei Shtylyov
34e2beb2c8 musb_core: fix musb_init_controller() error cleanup path
This function forgets to call usb_remove_hcd() or musb_gadget_cleanup() iff
sysfs_create_group() fails.

[ felipe.balbi@nokia.com : review the entire error path
	not only when we fail hcd or gadget ]

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 09:25:09 -07:00
Sergei Shtylyov
461972d8a4 musb_core: don't call musb_platform_exit() twice
musb_platform_exit() is called twice from musb_init_controller() iff controller
initialization fails. Move the call (and the DevCtl register writes surrounding
it) from musb_free() to musb_remove().

Fix mispalced and now incorrect 'goto's in musb_init_controller().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 09:25:09 -07:00
Sergei Shtylyov
3d0bfbf259 musb_core: don't prevent disabling clock on driver unload
Resetting 'musb->clock' to NULL in musb_shutdown() prevents musb_platform_exit()
from properly disabling the clock when unloading the driver -- don't do it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 09:25:08 -07:00
Sergei Shtylyov
1fb48f4a96 musb_core: don't touch 'musb->clock' in musb_free()
Remove duplicate/unbalanced calls to clk_disable()/clk_put() in musb_free():

- clk_disable() is called by musb_platform_exit() just prior to this call;
- clk_put() is called by the callers of musb_free() prior to calling it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 09:25:08 -07:00
Ajay Kumar Gupta
5e0e61afa5 musb: save and restore missing bus control register
Added the missing BUS_CONTROL register in musb
save/restore routines.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 09:25:08 -07:00
Felipe Balbi
aa4714560b usb: musb: core: declare mbase only where it's used
... and avoid a compilation if we disable host side
of musb.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:24:14 -07:00
Mike Frysinger
adb3ee421d usb: musb: abstract out ULPI_BUSCONTROL register reads/writes
The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY.
However, it has no ULPI support - so there are no registers at all.
That means accesses to ULPI_BUSCONTROL have to be abstracted away
like other MUSB registers.

This fixes building for Blackfin parts again.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:24:13 -07:00
Linus Torvalds
7f5b09c15a Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits)
  USB: backlight, appledisplay: fix incomplete registration failure handling
  USB: pl2303: remove unnecessary reset of usb_device in urbs
  USB: ftdi_sio: remove obsolete check in unthrottle
  USB: ftdi_sio: remove unused tx_bytes counter
  USB: qcaux: driver for auxiliary serial ports on Qualcomm devices
  USB: pl2303: initial TIOCGSERIAL support
  USB: option: add Longcheer/Longsung vendor ID
  USB: fix I2C API usage in ohci-pnx4008.
  USB: usbmon: mask seconds properly in text API
  USB: sisusbvga: no unnecessary GFP_ATOMIC
  USB: storage: onetouch: unnecessary GFP_ATOMIC
  USB: serial: ftdi: add CONTEC vendor and product id
  USB: remove references to port->port.count from the serial drivers
  USB: tty: Prune uses of tty_request_room in the USB layer
  USB: tty: Add a function to insert a string of characters with the same flag
  USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration()
  USB: tty: kill request_room for USB ACM class
  USB: tty: sort out the request_room handling for whiteheat
  USB: storage: fix misplaced parenthesis
  USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers
  ...
2010-03-03 08:48:58 -08:00
Felipe Balbi
ab3bbfa1af USB: musb: only print info message if probe() is successful
we were printing the info about musb probe too early where
it was still possible for things to go wrong. Move the
down right before the return 0 statement. While at that
also convert pr_info to dev_info.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:45 -08:00
Felipe Balbi
da5108e1a3 USB: musb: unmap base if we can't probe
when probe() fails, we should iounmap() the mapped address.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:43 -08:00
Felipe Balbi
ad517e9ed8 USB: musb: we already tested for dyn_fifo
... and even added a flag to struct musb, so let's
use that.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:39 -08:00
Felipe Balbi
8573e6a673 USB: musb: get rid of omap_readl/writel
we have those addresses already ioremaped, so let's
use our __raw_readl/writel wrappers.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:38 -08:00
Ajay Kumar Gupta
4f712e010b usb: musb: Add context save and restore support
Adding support for MUSB register save and restore during system
suspend and resume.

Changes:
        - Added musb_save/restore_context() functions
        - Added platform specific musb_platform_save/restore_context()
          to handle platform specific jobs.
        - Maintaining BlackFin compatibility by adding read/write
          functions for registers which are not available in BlackFin

Tested system suspend and resume on OMAP3EVM board.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:38 -08:00
Ajay Kumar Gupta
5fc4e77911 usb: musb: Add 'extvbus' in musb_hdrc_platform_data
Some of the board might use external Vbus power supply on musb
interface which would require to program ULPI_BUSCONTROL register.

Adding 'extvbus' flag which can be set from such boards which will
be checked at musb driver files before programming ULPI_BUSCONTROL.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:53:48 -08:00
Ajay Kumar Gupta
51bf0d0e6c usb: musb: save dynfifo in musb struct
Save dynamic FIFO read only information for later uses during
musb_save/restore_context functions.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:53:48 -08:00
Arnaud Mandy
1c25fda4a0 usb: musb: handle irqs in the order dictated by programming guide
MUSB's programming guide dictates how we should handle its
irqs and in which order. Follow that.

Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:53:47 -08:00
Ajay Kumar Gupta
3b151526ed USB: musb: Add new fifo table for a OMAP3 errata
We have observed MSC data read corruption when USB LAN device is
also connected and it's interface is up.

Silicon team has confirmed an errata where in all the active
transfers should use FIFO space either in first 8K or next 8K.
So far we have observed the issue in above use case scenario.

As a workaround to it, adding a new FIFO config (5) fitting well
within first 8K which can be used for such use cases.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:53:41 -08:00
Felipe Balbi
7ed069c12c USB: musb: remove some of the never defined defines
just makes the musb init code a bit cleaner.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:53:29 -08:00
Felipe Balbi
94375751d1 USB: musb: move to sysfs_groups
it's easier to keep up and add more sysfs entries
as necessary.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:53:29 -08:00
Felipe Balbi
b3b1cc3ba6 USB: musb: move two printk to dev_err
trivial cleanup, no functional changes.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:53:29 -08:00
Felipe Balbi
195e9e4691 USB: musb: use resource_size()
it makes ioremap() usage looks cleaner.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:53:28 -08:00
Tony Lindgren
a8eb7ca0cb omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3
Replace ARCH_OMAP34XX with ARCH_OMAP3

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 09:27:02 -08:00
Maulik Mankad
0ea52ff44f USB: musb: Fix array index out of bounds issue
This patch fixes the below array index out of bounds issue.

Buffer overflow, array index of 'aInfo' may be out of
bounds. Array 'aInfo' of size 78 may use index value(s) 6..84

The data stored in 'aInfo' array exceeds the array size of 78.

This patch increases the size of this array to hold the string
correctly without any memory corruption.

This issue was reported by Klockwork tool.

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:34:19 -08:00
Felipe Balbi
cd42fef0a0 USB: musb: do not work if no gadget driver is loaded
On OTG and gadget-only configurations, we need a gadget driver
in order to work properly, so avoid changing operation modes
when there's no gadget driver loaded.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:34:17 -08:00
Felipe Balbi
e3060b175c USB: musb: move musb_remove to __exit
probe() already was on __init, so moving remove() to __exit.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:34:13 -08:00
Alexey Dobriyan
471452104b const: constify remaining dev_pm_ops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:25 -08:00
Anand Gadiyar
32c3b94e2b USB: MUSB: save hardware revision at init
MUSB: save hardware revision at init

This can be used later to flag workarounds for issues affecting
particular revisions. Saving this at init avoids having to
read the HWVERS register multiple times in code.

While at it, use macros to extract the version information
instead of using hardcoded values.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:25 -08:00
Ajay Kumar Gupta
1230435c25 USB: musb: Remove unwanted message in boot log
Removes below unnecessary log of almost 28 lines during boot.

musb_hdrc: hw_ep 0shared, max 64
musb_hdrc: hw_ep 1tx, max 512
musb_hdrc: hw_ep 1rx, max 512
...
...
musb_hdrc: hw_ep 13shared, max 4096
musb_hdrc: hw_ep 14shared, max 1024
musb_hdrc: hw_ep 15shared, max 1024

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-30 16:43:16 -08:00
Ajay Kumar Gupta
c740d0d80d USB: musb: fix put_device() call sequence
Invoke put_device(musb->xceiv->dev) before musb_platform_exit()as
xceiv is getting unregistered in musb_platform_exit().

Fixes put_device() panic when module insert/removal is performed
multiple times.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:33 -07:00
Rafael J. Wysocki
2e6713c766 Merge branch 'master' into for-linus 2009-07-30 19:38:04 +02:00
Ajay Kumar Gupta
2bbff7b742 USB: musb: fix CONFIGDATA register read issue
INDEX register has to be set to '0' before reading
CONFIGDATA register which is only present in TI musb
platforms.

Currently the default register access mode is set to
FLAT_MODE thus INDEX register is not getting set
properly with musb_ep_select() which is just a nop
operation in FLAT_MODE.This invalid register read is
causing module reinset failure.

Fixing the issue by moving INDEX register write part to
musb_read_configdata() function itself.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:11 -07:00