Commit Graph

7764 Commits

Author SHA1 Message Date
Laurent Pinchart
ea8aa4349e [media] v4l: subdev: Control ioctls support
Pass the control-related ioctls to the subdev driver through the control
framework.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:42 -03:00
Laurent Pinchart
3dd5ee0801 [media] v4l: subdev: Uninline the v4l2_subdev_init function
The function isn't small or performance sensitive enough to be inlined.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:42 -03:00
Laurent Pinchart
2096a5dcf9 [media] v4l: subdev: Add device node support
Create a device node named subdevX for every registered subdev.

As the device node is registered before the subdev core::s_config
function is called, return -EGAIN on open until initialization
completes.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:42 -03:00
Laurent Pinchart
fc0a807985 [media] v4l: Share code between video_usercopy and video_ioctl2
The two functions are mostly identical. They handle the copy_from_user
and copy_to_user operations related with V4L2 ioctls and call the real
ioctl handler.

Create a __video_usercopy function that implements the core of
video_usercopy and video_ioctl2, and call that function from both.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:41 -03:00
Justin P. Mattock
b251e61847 [media] drivers:media:cx231xx.h remove one to many l's in the word
The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:41 -03:00
Justin P. Mattock
f41e4e9940 [media] drivers:media:cx23418.h remove one to many l's in the word
The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:41 -03:00
Igor M. Liplianin
050b648e63 [media] cx23885, altera-ci: remove operator return <value> in void procedure
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:39 -03:00
Daniel Drake
0522921c0f [media] via-camera: Add suspend/resume support
Add suspend/resume support to the via-camera driver, so that the video
continues streaming over a suspend-resume cycle.

Originally implemented by Jon Corbet.

[mchehab@redhat.com: fix a small CodingStyle issue]
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:37 -03:00
Paul Cassella
7fd4b41f05 [media] ivtv: yuv: handle get_user_pages() -errno returns
get_user_pages() may return -errno, such as -EFAULT.  So don't blindly use
its return value as an offset into dma->map[] for the next get_user_pages()
call.  Since we'll give up and return an error if either fails, don't even
make the second call if the first failed to give us exactly what we were
looking for.

The old code would also call put_page() on as many elements of dma->map[]
as we'd asked for, regardless of how many were valid.

[Andy Walls modified this patch to return -EFAULT instead of -EINVAL
as Paul's observation "I'm not sure -EINVAL is the best return code vs
-EFAULT or -ENOMEM, [...]" was correct.  The return value bubbles up
as a return code for write(), for which the V4L2 API spec indicates
EINVAL is incorrect and EFAULT is correct.]

Signed-off-by: Paul Cassella <fortytwo-ivtv@maneteren.bigw.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:35 -03:00
Andy Walls
0d44b1235c [media] ivtv: Fix sparse warning regarding a user pointer in ivtv_write_vbi_from_user()
Fix the first, botched attempt at preventing direct use of a user pointer in
ivtv_write_vbi().

Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:35 -03:00
Paul Cassella
793e71b667 [media] ivtv: udma: handle get_user_pages() returning fewer pages than we asked for
get_user_pages() may return fewer page than we ask for.  As we give up and
return an error in this case, we need to put_page() each of the pages we
did get.

[Andy Walls modified the patch, only removing the braces in the 'for'
statement, to eliminate a checkpatch warning.]

Signed-off-by: Paul Cassella <fortytwo-ivtv@manetheren.bigw.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:33 -03:00
Igor M. Liplianin
0cb73639cf [media] cx88: add support for TeVii S464 PCI card
The card uses ds3000 demod from Montage.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:27 -03:00
Mike Isely
19a0a296f2 [media] pvrusb2: Use sysfs_attr_init() where appropriate
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:22 -03:00
Mike Isely
058caa8784 [media] pvrusb2: Minor VBI tweak to help potential CC support
pvrusb2: Declare closed-caption setup for line 21 - this is needed for
sliced VBI capture support.  (However none of that works right now
anyway.)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:22 -03:00
Servaas Vandenberghe
6188a0f151 [media] pvrusb2: width and height maximum values
pvrusb2: The origin of the capability bounds rectangle may differ from
(left=0,top=0) so the calculation should use absolute coordinates,
here below, or use relative coordinates like
cropl_val-cap->bounds.left and cropt_val-cap->bounds.top.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:22 -03:00
Mike Isely
35fa5d4c48 [media] pvrusb2: Fix a few missing default control values, for cropping
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:22 -03:00
Mike Isely
4cfe3319a1 [media] pvrusb2: Minor cosmetic code tweak
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:21 -03:00
Mike Isely
9bf98321b4 [media] pvrusb2: Handle change of mode before handling change of video standard
pvrusb2: Recognize and handle mode change before dealing with changes
related to the video standard.  Even though the video standard should
only matter when in analog mode, doing this way is technically cleaner
in case there's other stuff that might depend on both.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:21 -03:00
Vasiliy Kulikov
14ddc3188d [media] video: sn9c102: world-wirtable sysfs files
Don't allow everybody to change video settings.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:21 -03:00
Lawrence Rust
6951803c24 [media] Add proper audio support for Nova-S Plus with wm8775 ADC
This patch adds audio DMA capture and ALSA mixer elements for the line
input jack of the Hauppauge Nova-S-plus DVB-S PCI card.  The Nova-S-plus
has a WM8775 ADC that is currently not detected.  This patch enables
this chip and exports volume, balance mute and ALC elements for ALSA
mixer controls.

[mchehab@redhat.com: Changed the patch to only talk with wm8775 if board
info says so. Also, added platform_data support, to avoid changing the
behaviour for other boards, and fixed CodingStyle]

[awalls@md.metrocast.net: Changed patch to make the WM8775_GID defintion
bridge driver private and let the bridge driver set the value of
v4l2_subdev.grp_id.]

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
2011-03-21 20:32:19 -03:00
Thomas Weber
d1303567f7 [media] omap24xxcam: Fix compilation
Add linux/sched.h because of missing declaration of TASK_NORMAL.

This patch fixes the following error:

drivers/media/video/omap24xxcam.c: In function
'omap24xxcam_vbq_complete':
drivers/media/video/omap24xxcam.c:415: error: 'TASK_NORMAL' undeclared
(first use in this function)
drivers/media/video/omap24xxcam.c:415: error: (Each undeclared
identifier is reported only once
drivers/media/video/omap24xxcam.c:415: error: for each function it
appears in.)

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:19 -03:00
Peter Huewe
61ca1500c5 [media] video/saa7164: Fix sparse warning: Using plain integer as NULL pointer
This patch fixes the warning "Using plain integer as NULL pointer",
generated by sparse, by replacing
	if (var == 0)
with
	if (!var)
after an allocation
and all other offending 0s with NULL.

KernelVersion: linus' tree-1f0324c

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:19 -03:00
Hans Verkuil
7ee9e64a3d [media] cx18: fix kernel oops when setting MPEG control before capturing
The cxhdl->priv field was not set initially, only after capturing started.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:19 -03:00
Igor M. Liplianin
2f2710bd4e [media] cx23885, altera-ci: enable all PID's less than 0x20 in hardware PID filter
It takes too long time to scan due to low symbol rate PID's
like PAT, PMT, CAT, NIT.
For that matter we enabled permanently all PID's
less 0x20 in hardware PID filter for NetUP Dual DVB-T/C CI RF card
to combine rates.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:18 -03:00
Igor M. Liplianin
702dd7903b [media] cx23885: disable MSI for NetUP cards, otherwise CI is not working
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:18 -03:00
Igor M. Liplianin
10d0dcd73c [media] cx23885: implement num_fds_portb, num_fds_portc parameters for cx23885_board structure
This is needed for multifrontend support.
NetUP Dual DVB-T/C CI RF card has frontends connected to port B & C
Each frontend has two switchable cores - DVB-T & DVB-C

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:18 -03:00
Igor M. Liplianin
557f48d572 [media] cx23885: implement tuner_bus parameter for cx23885_board structure
There is two external I2C buses in cx23885 chip.
Currently, analog tuners supported for second I2C bus only
In NetUP Dual DVB-T/C CI RF card tuners connected to first bus
So, in order to support analog tuners sitting on first bus
we need modifications.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:18 -03:00
Igor M. Liplianin
78db854757 [media] Initial commit to support NetUP Dual DVB-T/C CI RF card
The card based on cx23885 PCI-e brige. Altera FPGA for CI,
multistandard demods stv0367 from STM for QAM & OFDM,  Xcieve xc5000 tuners
and additional cx25840 for second analog input.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:18 -03:00
Igor M. Liplianin
349bcf02e3 [media] Altera FPGA based CI driver module
An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:16 -03:00
Peter Huewe
f72cfd859b [media] video/cx231xx: Fix sparse warning: Using plain integer as NULL pointer
This patch fixes the warning "Using plain integer as NULL pointer",
generated by sparse, by replacing the offending 0s with NULL.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:16 -03:00
Andrew Chew
9bd060e492 [media] V4L: Initial submit of OV9740 driver
This soc_camera driver is for Omnivision's OV9740 sensor.  This initial
submission provides support for YUV422 output at 1280x720 (720p), which is
the sensor's native resolution.  640x480 (VGA) is also supported, with
cropping and scaling performed by the sensor's ISP.

This driver is heavily based off of the existing OV9640 driver.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:16 -03:00
Guennadi Liakhovetski
787d0f9d5c [media] V4l: sh_mobile_ceu_camera: fix cropping offset calculation
Use the correct scales to calculate cropping offsets.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:15 -03:00
Guennadi Liakhovetski
379fa5d356 [media] V4L: mx3_camera: convert to videobuf2
Now that soc-camera supports videobuf API v1 and v2, camera-host drivers
can be converted to videobuf2 individually. This patch converts the
mx3_camera driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:15 -03:00
Guennadi Liakhovetski
a616898d6d [media] V4L: sh_mobile_ceu_camera: convert to videobuf2
Convert the sh_mobile_ceu_camera driver to the videobuf2 API.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:15 -03:00
Guennadi Liakhovetski
592c2aba26 [media] V4L: soc-camera: extend to also support videobuf2
Extend soc-camera core to also support the videobuf2 API.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:15 -03:00
Guennadi Liakhovetski
bd94f58828 [media] V4L: add missing EXPORT_SYMBOL* statements to vb2
videobuf2-memops and videobuf2-core can be compiled as modules, in which
case 3 more symbols from videobuf2-memops.c have to be exported.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:14 -03:00
Guennadi Liakhovetski
353c2129fd [media] V4L: omap1_camera: join split format lines
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:14 -03:00
Alberto Panizzo
a48be1d626 [media] V4L: mx3_camera: fix capture issues for non 8-bit per pixel formats
If the camera was set to output formats like RGB565 YUYV or SBGGR10,
the resulting image was scrambled due to erroneous interpretations of
horizontal parameter's units.

This patch in fourcc_to_ipu_pix, eliminate also the pixel formats mappings
that, first are not used within mainline code and second, standing at
the datasheets, they will not work properly:

The IPU internal bus support only the following data formatting
(44.1.1.3 Data Flows and Formats):
 1 YUV 4:4:4 or RGB-8 bits per color component
 2 YUV 4:4:4 or RGB-10 bits per color component
 3 Generic data (from sensor to the system memory only)

And format conversions are done:
 - from memory: unpacking from other formats to IPU supported ones
 - to memory: packing in the inverse order.

So, assigning a packing/unpacking strategy to the IPU for those formats
will produce a packing to memory and not the inverse.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:14 -03:00
Anatolij Gustschin
44facdc8c4 [media] V4L: mx3_camera: correct 'sizeimage' value reporting
The 'pix->width' field may be updated in mx3_camera_set_fmt() to
fulfill the IPU stride line alignment requirements. If this update
takes place, the 'fmt.pix.sizeimage' field in the struct v4l2_format
stucture returned by VIDIOC_S_FMT is wrong. We need to update the
'pix->sizeimage' field in the mx3_camera_set_fmt() function to fix
this issue.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:14 -03:00
Mathias Krause
5bccd60852 [media] V4L: omap1_camera: fix use after free
Even though clk_put() is a no-op on most architectures it is not for
some ARM implementations. To not fail on those, release the clock timer
before freeing the surrounding structure.

This bug was spotted by the semantic patch tool coccinelle using the
script found at scripts/coccinelle/free/kfree.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:14 -03:00
Alberto Panizzo
48a3c77338 [media] V4L: soc_mediabus: add a method to obtain the number of samples per pixel
Add a function to calculate the number of samples on the media-bus,
required to retrieve one pixel of a certain format.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:13 -03:00
Anatolij Gustschin
7fdbd85bce [media] V4L: soc-camera: start stream after queueing the buffers
Some camera systems have strong requirement for capturing
an exact number of frames after starting the stream and do
not tolerate losing captured frames. By starting the stream
after the videobuf has queued the buffers, we ensure that
no frame will be lost.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:13 -03:00
Qing Xu
ed5b65dc36 [media] V4L: soc-camera: add enum-frame-size ioctl
add vidioc_enum_framesizes implementation, follow default_g_parm()
and g_mbus_fmt() method

Signed-off-by: Qing Xu <qingx@marvell.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:13 -03:00
Hans Verkuil
d63044401a [media] saa7134-empress: add missing MPEG controls
Reported by, and based on a patch from, Martin Dauskardt.

The AUDIO_AC3_BITRATE control is still missing from this list, but such
optional controls are a bit hard to handle. This will be fixed automatically
when we switch to the control framework.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:12 -03:00
Hans Verkuil
7ee40aadab [media] v4l: removal of old, obsolete ioctls
Some ioctl's were defined wrong on 2.6.2 and 2.6.6, using the wrong
type of R/W arguments. They were fixed, but the old ioctl names are
still there, maintained to avoid breaking binary compatibility:

There's no sense on preserving those forever, as it is very doubtful
that someone would try to use a such old binary with a modern kernel.
Removing them will allow us to remove some magic done at the V4L ioctl
handler.

Note that any application compiled with a videodev2.h from 2.6.7 or later
will be using the correct ioctls.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:12 -03:00
Hans de Goede
76fafe78df [media] gspca_cpia1: Don't allow the framerate divisor to go above 2
Having a framerate divisor of 3 is not really necesarry and leads to
various troubles (frames going missing, compression issues) when allowed.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:11 -03:00
Hans de Goede
49b61ec9b5 [media] gspca: Add new vicam subdriver
This is a complete rewrite of the old v4l1 vicam subdriver, featuring
multiple resolutions, gain + exposure control and still has less code.

Oh and it is a v4l2 driver rather then v4l1 ofcourse :)

Many thanks to Devin Heitmueller <dheitmueller@kernellabs.com> for
donating his 3com homeconnect to me, which made this rewrite possible.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:10 -03:00
Hans de Goede
bcc6f66906 [media] gspca_sn9c20x: Add another MSI laptop to the sn9c20x upside down list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:10 -03:00
Hans de Goede
6899a9c777 [media] gspca_sn9c20x: Make buffers slightly larger for JPEG frames
In good lighting conditions (lots of details visible) the current buffers
are sometimes too small.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:10 -03:00
Hans de Goede
b39e0cb901 [media] gspca_sn9c20x: Add LED_REVERSE flag for 0c45:62bb
This fixes the led not working on this camera

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:10 -03:00
Hans de Goede
779b51f7a5 [media] gspca_sn9c20x: Add hflip and vflip controls for the ov7660 sensor
Tested with a camera with usb-id: 0c45:62bb

Also enable dmi based flopped laptop detection for the 0c45:627b ov7660 model.
Some of the MSI laptops with upside down camera have this one instead of the
0c45:624f.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:10 -03:00
Hans de Goede
8bc50f3540 [media] gspca_sn9c20x: Fix colored borders with ov7660 sensor
Tested with a camera with usb-id: 0c45:62bb

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:09 -03:00
Jean-François Moine
c42cedbb65 [media] gspca - ov519: Add the 800x600 resolution for sensors ov2610/2610ae
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:08 -03:00
Jean-François Moine
07c6c9c6d0 [media] gspca - ov519: Add the sensor ov2610ae
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:08 -03:00
Jean-François Moine
20c957b360 [media] gspca - sonixj: The pin S_PWR_DN is inverted for sensor mi0360
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:08 -03:00
Jean-François Moine
d57747f1e7 [media] gspca - ov534: Add saturation control for ov767x
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:08 -03:00
Jean-François Moine
458efe2d55 [media] gspca - ov534: Add the webcam 06f8:3002 and sensor ov767x
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:08 -03:00
Jean-François Moine
228dd2660c [media] gspca - ov534: Use the new control mechanism
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:08 -03:00
Jean-François Moine
062909f649 [media] gspca - sonixj, zc3xx: Let some bandwidth for audio when USB 1.1
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:07 -03:00
Jean-François Moine
5c95606b1d [media] gspca - sonixj: Set both pins for infrared of mt9v111 webcams
This avoids to define the webcam model.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:07 -03:00
Jean-François Moine
336d23ef88 [media] gspca - sonixj: Same init for all bridges but the sn9c102p
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:07 -03:00
Jean-François Moine
e6a92a7445 [media] gspca - sonixj: Simplify GPIO setting when audio present
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:06 -03:00
Jean-François Moine
222036765c [media] gspca - sonixj: Adjust autogain for sensor mt9v111
The gain/expo adjustment was too long.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:06 -03:00
Jean-François Moine
804632201f [media] gspca - sonixj: Fix start sequence of sensor mt9v111
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:06 -03:00
Jean-François Moine
b96cfc33e7 [media] gspca - sonixj: Update the JPEG quality for best image transfer
During image capture, the filling rate of the isoc packets is computed.
It is then used by a work queue to update the current JPEG quality.

Tested-by: Franck Bourdonnec <fbourdonnec@chez.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:06 -03:00
Jean-François Moine
dccdcccdd3 [media] gspca - sonixj: Have the same JPEG quality for encoding and decoding
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:06 -03:00
Jean-François Moine
a4a3076ffc [media] gspca - sonixj: Better scanning of isochronous packets
A marker 'ff ff 00 c4 c4 96' indicates an end of frame.
It is 62 bytes long and may be splitted on 2 packets.
It contains a flag 'USB full' which indicates that the frame is truncated.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:06 -03:00
Jean-François Moine
0f77f40c30 [media] gspca - sonixj: Move the avg lum computation to a separate function
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:05 -03:00
Hans Verkuil
87a0c94ce6 [media] v4l2-ctrls: Fix control enumeration for multiple subdevs with ctrl
v4l2-ctl and qv4l2 enumerate controls using V4L2_CTRL_FLAG_NEXT_CTRL,
falling back to the old method if the flag isn't supported.

The v4l2_subdev_queryctrl function will currently handle that flag, but
for the controls of the subdev only. This isn't right, it should refuse
this flag, otherwise v4l2-ctl will only see the controls of the first
subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:04 -03:00
Mauro Carvalho Chehab
fb8decfabd [media] em28xx: properly handle subdev controls
Subdev controls return codes are evil, as they return -EINVAL to mean
both unsupported and invalid arguments. Due to that, we need to use a
trick to identify what controls are supported by a subdev.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:04 -03:00
Mauro Carvalho Chehab
78e51566f0 [media] em28xx: Fix return value for s_ctrl
On some cases, driver returns 1. This should be OK, but qv4l2 is too
strict about return values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:04 -03:00
Mauro Carvalho Chehab
0e09a3c92b [media] tvp5150: device detection should be done only once
Having the device detection happening at reset is bad, as every time,
it will produce a message like:
	tvp5150 2-005c: tvp5150am1 detected.

This only polutes the log and for an accidental kernel hacker, it looks
like a real problem. So, move those printk's to happen during device
probe.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:04 -03:00
Mauro Carvalho Chehab
550df5a450 [media] tuner-core: Don't touch at standby during tuner_lookup
It makes no sense that tuner_lookup would touch at the standby
state. Remove it.

Thanks-to: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:03 -03:00
Mauro Carvalho Chehab
0eec66c0df [media] tuner-core: Rearrange some functions to better document
Group a few functions together and add/fix comments for each
block of the driver.

This is just a cleanup patch meant to improve driver readability.
No functional changes in this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:03 -03:00
Mauro Carvalho Chehab
a2894e3f8e [media] tuner-core: Improve function documentation
This driver is complex, and used by everyone. Better to have it
properly documented.

No functional changes are done in this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:03 -03:00
Mauro Carvalho Chehab
ad020dc2fe [media] tuner-core: remove usage of DIGITAL_TV
tuner-core has no business to do with digital TV. So, don't use
T_DIGITAL_TV on it, as it has no code to distinguish between
them, and nobody fills T_DIGITAL_TV right.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:03 -03:00
Mauro Carvalho Chehab
0ae79d993c [media] tuner-core: Fix a few comments on it
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:03 -03:00
Mauro Carvalho Chehab
a34ec5f374 [media] tuner-core: dead code removal
Remove the now obsolete set_freq. Also merge set_addr and set_type_addr.

In the past, it used to have two different setup calls, one to set just
the tuner type to any tuner found, and another to set the type only if
the address matches. Those two internal calls were grouped together,
but the functions weren't merged, making the code uglier.

No functional changes are done in this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:02 -03:00
Mauro Carvalho Chehab
900f734b3b [media] tuner-core: Don't use a static var for xc5000_cfg
A static var is evil, especially if a device has two boards with
xc5000. Instead, just like the other drivers, use stack to store
its config during setup.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:02 -03:00
Mauro Carvalho Chehab
7d275bf840 [media] tuner-core: CodingStyle cleanups
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:02 -03:00
Mauro Carvalho Chehab
e2f63d9ba5 [media] tuner-core: do the right thing for suspend/resume
Power down tuners at suspend. At resume, if the tuner is in standby,
calls set_mode, that will turn it on and set the latest frequencies.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:01 -03:00
Mauro Carvalho Chehab
cbde689823 [media] tuner-core: Better implement standby mode
In the past, T_STANDBY were used on devices with a separate radio tuner to
mark a tuner that were disabled. With the time, it got newer meanings.

Also, due to a bug at the logic, the driver might incorrectly return
T_STANDBY to userspace.

So, instead of keeping the abuse, just use a boolean for storing
such information.

We can't remove T_STANDBY yet, as this is used on two other drivers. A
latter patch will address its usage outside tuner-core.

Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:01 -03:00
Mauro Carvalho Chehab
e2d25a2474 [media] tuner-core: Some cleanups at check_mode/set_mode
Properly document those functions and do some cleanups around that.
There's just one behavior change on this patchset: it will now restore
TV frequency when changing from radio to TV mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:01 -03:00
Mauro Carvalho Chehab
9f3f71ef6d [media] tuner-core: Reorganize the functions internally
This is a big patch with no functional changes. It just
rearranges everything inside the driver, and prepares to
break TV and Radio into two separate fops groups.

Currently, it has an heuristics logic to determine if the
call came from radio or video. However, the caller driver
knows for sure, so tuner-core shouldn't try to guess it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:01 -03:00
Mauro Carvalho Chehab
b77bdb0288 [media] tuner-core: move some messages to the proper place
Move the frequency set debug printk's to the code that actually
are changing it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:00 -03:00
Mauro Carvalho Chehab
04f590e82b [media] tuner-core: remove the legacy is_stereo() call
Nobody is using this legacy call. Just remove it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:00 -03:00
Mauro Carvalho Chehab
5620094a2e [media] tuner-core: Remove V4L1/V4L2 API switch
V4L1 was removed. So, the code there is just dead code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:00 -03:00
Mauro Carvalho Chehab
121ec13267 [media] cx88: Don't allow opening a device while it is not ready
After registering the cdev, it would be possible do have an open on it.
In a matter of fact, some versions of udev do this. So, move registration
to the end and protect it with a mutex.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:00 -03:00
Mauro Carvalho Chehab
b618726414 [media] cx88: use unlocked_ioctl for cx88-video.
cx88-video has locks. don't use the locked ioctl version, as
it is not needed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:00 -03:00
Mauro Carvalho Chehab
4e105039da [media] cx231xx: Add support for PV Xcapture USB
Adds support for Pixelviex Xcapture USB grabber device.
This device has one composite and one s-video entry
only, plus a button.

For now, the button is not supported.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:32:00 -03:00
Mauro Carvalho Chehab
38f5ddc1bf [media] cx231xx: Allow some boards to not use I2C port 3
Some devices don't need to use it. So allow to just disable this logic.
Having it enabled on some devices cause power management to complain,
generating error -71.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:59 -03:00
Mauro Carvalho Chehab
2f86138706 [media] cx231xx: Use parameters to describe some board variants
Instead of per-model tests all over the code, use some parameters
at the board entries to describe the model variants for:
	- devices with 417 MPEG encoder;
	- devices that use external AV;
	- devices where vbi VANC endpoint doesn't work;
	- devices with xc5000 that require different IF
	  initialization (and probably will cover also
	  xc3028).
	- devices with xceive tuner that require a reset
	  during init.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:59 -03:00
Mauro Carvalho Chehab
3f25ffa2cd [media] cx231xx: Use a generic check for TUNER_XC5000
The check for xc5000 assumes that the tuner will always
be using the same bus and will have the same address.
As those are configurable via dev->board, it should use,
instead, the values defined there.

Also, a similar type of test will be needed by other
tuners (for example, for TUNER_XC2028)

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:59 -03:00
Mauro Carvalho Chehab
8bb84227d1 [media] cx231xx: Simplify interface checking logic at probe
Just a cleanup patch. Removes one indent level by moving
the return -ENODEV to happen before the device register
logic, if the interface is not the audio/video (int 1).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:59 -03:00
Hans Verkuil
cbfb3daa66 [media] cpia2: convert to video_ioctl2
Unable to test this due to lack of hardware.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:51 -03:00
Hans Verkuil
afa3852161 [media] pwc: convert to video_ioctl2
Tested with a Logitech QuickCam Pro 4000.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:51 -03:00
Hans Verkuil
b577f962d2 [media] pwc: convert to core-assisted locking
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:51 -03:00
Hans Verkuil
5b2830298d [media] vivi: fix compiler warning
drivers/media/video/vivi.c:1059: warning: this decimal constant is unsigned only in ISO C90

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:51 -03:00
Hans Verkuil
7e996afa81 [media] vivi: convert to the control framework and add test controls
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:50 -03:00
Hans Verkuil
0eb73de019 [media] tvp7002: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:50 -03:00
Hans Verkuil
9a775323ee [media] vpx3220: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:50 -03:00
Hans Verkuil
6c45ec718e [media] tvp5150: use the control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:50 -03:00
Hans Verkuil
cf6832afe5 [media] tvp514x: use the control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:50 -03:00
Hans Verkuil
e3d5ef0410 [media] tlv320aic23b: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:50 -03:00
Hans Verkuil
4744ebf631 [media] saa7110: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:50 -03:00
Hans Verkuil
bd84a65aef [media] bt819: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:49 -03:00
Hans Verkuil
ceed52d67e [media] adv7343: use control framework
Also fixed a memory leak in the probe function if an error occurred.
The gain control range was also fixed (a proper range from -64 to 64).

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:49 -03:00
Hans Verkuil
a75b9be1c2 [media] cx18: Use the control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:49 -03:00
Hans Verkuil
34a078da8e [media] cs5345: use the control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:49 -03:00
Mauro Carvalho Chehab
d642f2f3c5 [media] add support for Encore FM3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:49 -03:00
Mauro Carvalho Chehab
99fb079aad [media] saa7134: Properly report when a board doesn't have eeprom
When a device is not detected, the driver prints a warning message.
That's ok, except for the fact that, even on newer devices that have
eeprom but aren't yet supported, it prints a message saying that the
device doesn't have eeprom.

Fix it by having a separate message for devices with eeprom, but not
yet known by the driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:48 -03:00
Pawel Osciak
e007a32526 [media] v4l: vivi: port to videobuf2
Make vivi use videobuf2 in place of videobuf.

Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:48 -03:00
Sylwester Nawrocki
f8e2e3eab8 [media] Add v4l2 subdev driver for NOON010PC30L image sensor
Add I2C/V4L2 subdev driver for Siliconfile NOON010PC30 CIF camera.
The driver implements basic functionality, i.e. CIF/QCIF/QQCIF
resolution and color format selection, automatic/manual color
balance control. Other functions like cropping, rotation/flip,
exposure etc. can be easily implemented if needed.

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:40 -03:00
Sungchun Kang
ba10795ed1 [media] s5p-fimc: fimc_stop_capture bug fix
When is called fimc_stop_capture, it seems that wait_event_timeout
used improperly. It should be wake up by irq handler.

Reviewed-by Jonghun Han <jonghun.han@samsung.com>

Signed-off-by: Sungchun Kang <sungchun.kang@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:40 -03:00
Hyunwoong Kim
5bbe425e57 [media] s5p-fimc: fix MSCTRL.FIFO_CTRL for performance enhancement
This patch fixes the value of FIFO_CTRL in MSCTRL.
Main-scaler has the value to specify a basis FIFO control of input DMA.

The description of FIFO_CTRL has been changed as below.
0 = FIFO Empty (Next burst transaction is possible when FIFO is empty)
1 = FIFO Full (Next burst transaction is possible except Full FIFO)

Value '1' is recommended to enhance the FIMC operation performance.

Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Hyunwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:40 -03:00
Hyunwoong Kim
65777e5c58 [media] s5p-fimc: Support stop_streaming and job_abort
This patch adds callback functions, stop_streaming and job_abort,
to abort or finish any DMA in progress. stop_streaming is called
by videobuf2 framework and job_abort is called by m2m framework.
ST_M2M_PEND state is added to discard the next job.

Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Hyunwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:40 -03:00
Hyunwoong Kim
1b09f292eb [media] s5p-fimc: update checking scaling ratio range
Horizontal and vertical scaling range are according to the following equations.
If (SRC_Width >= 64 x DST_Width) { Exit(-1);  /* Out of Horizontal scale range}
If (SRC_Height >= 64 x DST_Height) { Exit(-1);  /* Out of Vertical scale range}

fimc_check_scaler_ratio() is used to check if horizontal and vertical
scale range are valid or not. To use fimc_check_scaler_ratio,
source and destination format should be set by VIDIOC_S_FMT.
And in case of scaling up, it doesn't have to check the scale range.

Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Hyunwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:40 -03:00
Sylwester Nawrocki
70f66ea2aa [media] s5p-fimc: Move scaler details handling to the register API file
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:39 -03:00
Hyunwoong Kim
b241c6d6f4 [media] s5p-fimc: Configure scaler registers depending on FIMC version
The main scaler has four SFRs for main scaler ratio depending on FIMC version.
FIMC 4.x has only two SFRs and FIMC 5.x has four SFRs for main scaler.
Those are MainHorRatio, MainHorRatio_ext, MainVerRatio and MainverRatio_ext.

The FIMC 5.x has 15 bit resolution for scaling ratio as below.
{MainHorRatio,MainHorRatio_ext} = {[14:6],[5:0]}.
{MainVerRatio,MainVerRatio_ext} = {[14:6],[5:0]}.
MainHorRatio = CISCCTRL[24:16], MainHorRatio_ext = CIEXTEN[15:10]
MainVerRatio = CISCCTRL[8:0],   MainVerRatio_ext = CIEXTEN[5:0]

This patch supports FIMC 4.x and FIMC 5.x using platform_device_id::driver_data.

Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Hyunwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:39 -03:00
Hyunwoong Kim
10038bea7a [media] s5p-fimc: fix the value of YUV422 1-plane formats
Some color formats are mismatched in s5p-fimc driver.
CIOCTRL[1:0], order422_out, should be set 2b'00 not 2b'11
to use V4L2_PIX_FMT_YUYV. Because in V4L2 standard V4L2_PIX_FMT_YUYV means
"start + 0: Y'00 Cb00 Y'01 Cr00 Y'02 Cb01 Y'03 Cr01". According to datasheet
2b'00 is right value for V4L2_PIX_FMT_YUYV.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:39 -03:00
Sylwester Nawrocki
a25be18dfb [media] s5p-fimc: Add control of the external sensor clock
Manage the camera sensor clock in the host driver rather than
leaving this task for sensor drivers. The clock frequency
must be passed in the sensor's and host driver's platform data.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:39 -03:00
Sylwester Nawrocki
ac75934cc6 [media] s5p-fimc: Enable simultaneous rotation and flipping
Map all (0, 90, 180, 270) deg counterclockwise rotation and
horizontal and vertical flip controls to (0, 90) deg rotation,
horizontal and vertical flip transformations available
in the device.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:39 -03:00
Sylwester Nawrocki
d9160afd31 [media] s5p-fimc: Use default input DMA burst count
Increase the input DMA "successive burst count" to default
value 4 to improve DMA performance. Minor cleanup.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:39 -03:00
Sylwester Nawrocki
e9654ef287 [media] s5p-fimc: Enable interworking without subdev s_stream
Prevent VIDIOC_STREAMON failing when s_stream callback is
not implemented by a sensor subdev driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:38 -03:00
Sylwester Nawrocki
3d0ce7ed03 [media] s5p-fimc: Derive camera bus width from mediabus pixelcode
Remove bus_width from s5p_fimc_isp_info data structure.
Determine camera data bus width based on mediabus pixel format.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:38 -03:00
Sylwester Nawrocki
df7e09a351 [media] s5p-fimc: Rename s3c_fimc* to s5p_fimc*
Change s3c_fimc.h header file name to s5p_fimc.h, replace s3c_fimc_*
names with s5p_fimc_*. s3c_fimc need to be reserved for S3C series
and s5p-fimc driver will not cover CAMIF devices in S3C SoC series.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:38 -03:00
Sylwester Nawrocki
8293ebfce2 [media] s5p-fimc: Use v4l core mutex in ioctl and file operations
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:36 -03:00
Sylwester Nawrocki
ef7af59b2c [media] s5p-fimc: Conversion to multiplanar formats
Conversion to multiplanar color formats and minor cleanup.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:36 -03:00
Sylwester Nawrocki
2dab38e227 [media] s5p-fimc: Porting to videobuf 2
Porting to videobuf 2 and minor cleanup.
Separate videobuf_queue_ops are are created for m2m
and capture video nodes.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:36 -03:00
Marek Szyprowski
d80ee38cd8 [media] v4l: mem2mem: port m2m_testdev to vb2
This patch ports mem2mem test device to videobuf2 framework.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:35 -03:00
Marek Szyprowski
908a0d7c58 [media] v4l: mem2mem: port to videobuf2
Port memory-to-memory framework to videobuf2 framework.

Add support for multi-planar Video for Linux 2 API extensions to the
memory-to-memory driver framework.

Based on the original patch written by Pawel Osciak.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:35 -03:00
Mauro Carvalho Chehab
08b99e26a3 [media] vb2 core: Fix a few printk warnings
drivers/media/video/videobuf2-core.c: In function ‘__vb2_perform_fileio’:
drivers/media/video/videobuf2-core.c:1638: warning: format ‘%ld’ expects type ‘long int’, but argument 4 has type ‘size_t’
drivers/media/video/videobuf2-core.c:1697: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘size_t’
drivers/media/video/videobuf2-core.c:1703: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘size_t’

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:34 -03:00
Marek Szyprowski
b25748fe61 [media] v4l: videobuf2: add read() and write() emulator
Add a generic file io (read and write) emulator for videobuf2. It uses
MMAP memory type buffers and generic vb2 calls: req_bufs, qbuf and
dqbuf. Video date is being copied from mmap buffers to userspace with
standard copy_to_user() function. To add support for file io the driver
needs to provide an additional callback - read_setup or write_setup. It
should provide the default number of buffers used by emulator and flags.

With these flags one can detemine the style of read() or write()
emulation. By default 'streaming' style is used. With
VB2_FILEIO_READ_ONCE flag one can select 'one shot' mode for read()
emulator. With VB2_FILEIO_WRITE_IMMEDIATE flag one can select immediate
conversion of write calls to qbuf for write() emulator, so the vb2 will
not wait until each buffer is filled completely before queueing it to
the driver.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:34 -03:00
Andrzej Pietrasiewicz
5ba3f757f0 [media] v4l: videobuf2: add DMA scatter/gather allocator
Add an implementation of DMA scatter/gather allocator and handling
routines for videobuf2.

For mmap operation mode it is implemented on top of
alloc_page + sg_set_page/_free_page.

For userptr operation mode it is implemented on top of
get_user_pages + sg_set_page/put_page.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:34 -03:00
Pawel Osciak
1a758d4e84 [media] v4l: videobuf2: add DMA coherent allocator
Add an implementation of DMA coherent memory allocator and handling
routines for videobuf2, implemented on top of dma_alloc_coherent() call.

Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:34 -03:00
Pawel Osciak
3c18ff06d8 [media] v4l: videobuf2: add vmalloc allocator
Add an implementation of contiguous virtual memory allocator and handling
routines for videobuf2, implemented on top of vmalloc()/vfree() calls.

Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:34 -03:00
Marek Szyprowski
004cc3781c [media] v4l: videobuf2: add generic memory handling routines
Add generic memory handling routines for userspace pointer handling,
contiguous memory verification and mapping.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:34 -03:00
Pawel Osciak
e23ccc0ad9 [media] v4l: add videobuf2 Video for Linux 2 driver framework
Videobuf2 is a Video for Linux 2 API-compatible driver framework for
multimedia devices. It acts as an intermediate layer between userspace
applications and device drivers. It also provides low-level, modular
memory management functions for drivers.

Videobuf2 eases driver development, reduces drivers' code size and aids in
proper and consistent implementation of V4L2 API in drivers.

Videobuf2 memory management backend is fully modular. This allows custom
memory management routines for devices and platforms with non-standard
memory management requirements to be plugged in, without changing the
high-level buffer management functions and API.

The framework provides:
- implementations of streaming I/O V4L2 ioctls and file operations
- high-level video buffer, video queue and state management functions
- video buffer memory allocation and management

Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:34 -03:00
Pawel Osciak
52a3082fea [media] v4l: Add compat functions for the multi-planar API
Add multi-planar ioctl handling to the 32bit compatibility layer.

[mchehab@redhat.com: Merged with a fixup patch from Pawel]
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:33 -03:00
Pawel Osciak
d14e6d76eb [media] v4l: Add multi-planar ioctl handling code
Add multi-planar API core ioctl handling and conversion functions.

[mchehab@redhat.com: CondingStyle fixup]
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:33 -03:00
Pawel Osciak
f8f3914cf9 [media] v4l: Add multi-planar API definitions to the V4L2 API
Multi-planar API is as a backwards-compatible extension of the V4L2 API,
which allows video buffers to consist of one or more planes. Planes are
separate memory buffers; each has its own mapping, backed by usually
separate physical memory buffers.

Many different uses for the multi-planar API are possible, examples
include:
- embedded devices requiring video components to be placed in physically
separate buffers, e.g. for Samsung S3C/S5P SoC series' video codec,
Y and interleaved Cb/Cr components reside in buffers in different
memory banks;
- applications may receive (or choose to store) video data of one video
buffer in separate memory buffers; such data would have to be temporarily
copied together into one buffer before passing it to a V4L2 device;
- applications or drivers may want to pass metadata related to a buffer and
it may not be possible to place it in the same buffer, together with video
data.

[mchehab@redhat.com: CodingStyle fixes]
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21 20:31:33 -03:00
Linus Torvalds
4c5811bf46 Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
  tty: serial: altera_jtaguart: Add device tree support
  tty: serial: altera_uart: Add devicetree support
  dt: eliminate of_platform_driver shim code
  dt: Eliminate of_platform_{,un}register_driver
  dt/serial: Eliminate users of of_platform_{,un}register_driver
  dt/usb: Eliminate users of of_platform_{,un}register_driver
  dt/video: Eliminate users of of_platform_{,un}register_driver
  dt/net: Eliminate users of of_platform_{,un}register_driver
  dt/sound: Eliminate users of of_platform_{,un}register_driver
  dt/spi: Eliminate users of of_platform_{,un}register_driver
  dt: uartlite: merge platform and of_platform driver bindings
  dt: xilinx_hwicap: merge platform and of_platform driver bindings
  ipmi: convert OF driver to platform driver
  leds/leds-gpio: merge platform_driver with of_platform_driver
  dt/sparc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: move of_bus_type infrastructure to ibmebus
  drivercore/dt: add a match table pointer to struct device
  dt: Typo fix.
  altera_ps2: Add devicetree support
  ...
2011-03-16 17:28:10 -07:00
Devin Heitmueller
e3bfeabbf5 [media] cx18: Add support for Hauppauge HVR-1600 models with s5h1411
The newest variants of the HVR-1600 have an s5h1411/tda18271 for the digital
frontend.  Add support for these boards.

Thanks to Hauppauge Computer Works for providing sample hardware.

[awalls@md.metrocast.net: Changed an additional log message to clarify for
the end user that the driver is defaulting to an original HVR-1600 for
unknown model numbers.]

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-02 13:45:56 -03:00
Michael
d213ad0836 [media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
After upgrading the kernel from stock Ubuntu 7.10 to
10.04, with no hardware changes, I started getting the dreaded DMA
TIMEOUT errors, followed by inability to encode until the machine was
rebooted.

I came across a post from Andy in March
(http://www.gossamer-threads.com/lists/ivtv/users/40943#40943) where he
speculates that perhaps the corrective actions being taken after a DMA
ERROR are not sufficient to recover the situation.  After some testing
I suspect that this is indeed the case, and that in fact the corrective
action may be what hangs the card's DMA engine, rather than the
original error.

Specifically these DMA ERROR IRQs seem to present with two different
values in the IVTV_REG_DMASTATUS register: 0x11 and 0x13.  The current
corrective action is to clear that status register back to 0x01 or
0x03, and then issue the next DMA request.  In the case of a 0x13 this
seems to result in a minor glitch in the encoded stream due to the
failed transfer that was not retried, but otherwise things continue OK.
In the case of a 0x11 the card's DMA write engine is never heard from
again, and a DMA TIMEOUT follows shortly after.  0x11 is the killer.

I suspect that the two cases need to be handled differently.  The
difference is in bit 1 (0x02), which is set when the error is about to
be successfully recovered, and clear when things are about to go bad.

Bit 1 of DMASTATUS is described differently in different places either
as a positive "write finished", or an inverted "write busy".  If we
take the first definition, then when an error arises with state 0x11,
it means that the write did not complete.   It makes sense to start a
new transfer, as in the current code.  But if we take the second
definition, then 0x11 means "an error but the write engine is still
busy".  Trying to feed it a new transfer in this situation might not be
a good idea.

As an experiment, I added code to ignore the DMA ERROR IRQ if DMASTATUS
is 0x11.  I.e., don't start a new transfer, don't clear our flags, etc.
The hope was that the card would complete the transfer and issue a ENC
DMA COMPLETE, either successfully or with an error condition there.
However the card still hung.

The only remaining corrective action being taken with a 0x11 status was
then the write back to the status register to clear the error, i.e.
DMASTATUS = DMASTATUS & ~3.  This would have the effect of clearing the
error bit 4, while leaving the lower bits indicating DMA write busy.

Strangely enough, removing this write to the status register solved the
problem!  If the DMA ERROR IRQ with DMASTATUS=0x11 is completely
ignored, with no corrective action at all, then the card will complete
the transfer and issue a new IRQ.  If the status register is written to
when it has the value 0x11, then the DMA engine hangs.  Perhaps it's
illegal to write to
DMASTATUS while the read or write busy bit is set?  At any rate, it
appears that the current corrective action is indeed making things
worse rather than better.

I put together a patch that modifies ivtv_irq_dma_err to do the
following:

- Don't write back to IVTV_REG_DMASTATUS.
- If write-busy is asserted, leave the card alone.  Just extend the
timeout slightly.
- If write-busy is de-asserted, retry the current transfer.

This has completely fixed my DMA TIMEOUT woes.  DMA ERR events still
occur, but now they seem to be correctly handled.  0x11 events no
longer hang the card, and 0x13 events no longer result in a glitch in
the stream, as the failed transfer is retried.  I'm happy.

I've inlined the patch below in case it is of interest.  As described
above, I have a theory about why it works (based on a different
interpretation of bit 1 of DMASTATUS), but I can't guarantee that my
theory is correct.  There may be another explanation, or it may be a
fluke.  Maybe ignoring that IRQ entirely would be equally effective?
Maybe the status register read/writeback sequence is race condition if
the card changes it in the mean time?  Also as I am using a PVR-150
only, I have not been able to test it on other cards, which may be
especially relevant for 350s that support concurrent decoding.
Hopefully the patch does not break the DMA READ path.

Mike

[awalls@md.metrocast.net: Modified patch to add a verbose comment, make minor
brace reformats, and clear the error flags in the IVTV_REG_DMASTATUS iff both
read and write DMA were not in progress.  Mike's conjecture about a race
condition with the writeback is correct; it can confuse the DMA engine.]

[Comment and analysis from the ML post by Michael <mike@rsy.com>]
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-02 13:45:42 -03:00
Sven Barth
1e6406b8f0 [media] cx25840: fix probing of cx2583x chips
Fix the probing of cx2583x chips, because two controls were clustered
that are not created for these chips.

This regression was introduced in 2.6.36.

Signed-off-by: Sven Barth <pascaldragon@googlemail.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-02 13:45:33 -03:00
Andy Walls
593110d143 [media] cx23885: Remove unused 'err:' labels to quiet compiler warning
The previous revert-commit, that affected cx23885-i2c.c, left some
unused labels that the compiler griped about.  Clean them up.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-02 13:45:27 -03:00
Andy Walls
67914b5c40 [media] cx23885: Revert "Check for slave nack on all transactions"
This reverts commit 44835f197b.

With the CX23885 hardware I2C master, checking for I2C slave ACK/NAK
is not valid when the I2C_EXTEND or I2C_NOSTOP bits are set.
Revert the commit that checks for I2C slave ACK/NAK on all transactions,
so that XC5000 tuners work with the CX23885 again.

Thanks go to Mark Zimmerman for reporting and bisecting this problem.

Bisected-by: Mark Zimmerman <markzimm@frii.com>

Reported-by: Mark Zimmerman <markzimm@frii.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-02 13:45:19 -03:00
Grant Likely
1c48a5c93d dt: Eliminate of_platform_{,un}register_driver
Final step to eliminate of_platform_bus_type.  They're all just
platform drivers now.

v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 13:22:46 -07:00
Devin Heitmueller
54ebb8b83f [media] au0828: fix VBI handling when in V4L2 streaming mode
au0828: fix VBI handling when in V4L2 streaming mode

It turns up V4L2 streaming mode (a.k.a mmap) was broken for VBI streaming.
This was causing libzvbi to fall back to V4L1 capture mode, and is a blatent
violation of the V4L2 specification.

Make the implementation work properly in this mode.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-02 12:08:33 -02:00
sensoray-dev
752eb7ae50 [media] s2255drv: firmware re-loading changes
Change for firmware re-loading and updated firmware versions.

Signed-off-by: Dean Anderson <linux-dev@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-02 11:13:37 -02:00
Pawel Osciak
0552774d06 [media] Fix double free of video_device in mem2mem_testdev
video_device is already being freed in video_device.release callback on
release.

Signed-off-by: Pawel Osciak <pawel@osciak.com>
Reported-by: Roland Kletzing <devzero@web.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-02 10:42:48 -02:00
Russell King
bed3c1de66 [media] fix saa7111 non-detection
One saa7111 device is reporting a different ID:

saa7115 0-0024: chip found @ 0x48 (ID 0f7111d0e111111) does not match a known saa711x chip.

As this is for sure a saa7111, change the detection code to also
cover this device.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 14:19:50 -02:00
Jarod Wilson
8df59918b5 [media] ir-kbd-i2c: improve remote behavior with z8 behind usb
Add the same "are you ready?" i2c_master_send() poll command to
get_key_haup_xvr found in lirc_zilog, which is apparently seen in
the Windows driver for the PVR-150 w/a z8. This stabilizes what is
received from both the HD-PVR and HVR-1950, even with their polling
intervals at the default of 100, thus the removal of the custom
260ms polling_interval in pvrusb2-i2c-core.c.

Acked-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Mike Isely <isely@isely.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:19:15 -02:00
Jarod Wilson
7f2a06deaa [media] hdpvr: fix up i2c device registration
We have to actually call i2c_new_device() once for each of the rx and tx
addresses. Also improve error-handling and device remove i2c cleanup.

Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:18:04 -02:00
Jean-François Moine
a5ecdfb3da [media] gspca - zc3xx: Discard the partial frames
In some cases, some frames may not end with the JPEG end of frame.
Being not complete, they are now discarded.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:05:48 -02:00
Jean-François Moine
3d244065cb [media] gspca - zc3xx: Fix bad images with the sensor hv7131r
The problem was introduced by the commit 2af0b4c60c.
Some registers were no more initialized.

Tested-by: <Giovanni Scafora giovanni@archlinux.org>
Tested-by: <Sergey Manucharian sm@ingeniware.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:05:26 -02:00
Jean-François Moine
7c45f2c7fe [media] gspca - zc3xx: Bad delay when given by a table
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:04:25 -02:00
Linus Torvalds
13a3cec844 Merge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits)
  [media] staging/lirc: fix mem leaks and ptr err usage
  [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
  [media] hdpvr: enable IR part
  [media] rc/mceusb: timeout should be in ns, not us
  [media] v4l2-device: fix 'use-after-freed' oops
  [media] v4l2-dev: don't memset video_device.dev
  [media] zoran: use video_device_alloc instead of kmalloc
  [media] w9966: zero device state after a detach
  [media] v4l: Fix a use-before-set in the control framework
  [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
  [media] DocBook/v4l: update V4L2 revision and update copyright years
  [media] DocBook/v4l: fix validation error in dev-rds.xml
  [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
  [media] v4l2-ctrls: fix missing 'read-only' check
  [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
  [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
  [media] lirc_zilog: Update TODO.lirc_zilog
  [media] lirc_zilog: Add Andy Walls to copyright notice and authors list
  [media] lirc_zilog: Remove useless struct i2c_driver.command function
  [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
  ...
2011-01-21 16:50:31 -08:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Jarod Wilson
559d162e1e [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
The current hdpvr code kmalloc's a new buffer for every i2c read and
write. Rather than do that, lets allocate a buffer in the driver's
device struct and just use that every time.

The size I've chosen for the buffer is the maximum size I could
ascertain might be used by either ir-kbd-i2c or lirc_zilog, plus a bit
of padding (lirc_zilog may use up to 100 bytes on tx, rounded that up
to 128).

Note that this might also remedy user reports of very sluggish behavior
of IR receive with hdpvr hardware.

v2: make sure (len <= (dev->i2c_buf)) [Jean Delvare]

Reported-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 12:52:21 -02:00
Jarod Wilson
324b04ba5d [media] hdpvr: enable IR part
A number of things going on here, but the end result is that the IR part
on the hdpvr gets enabled, and can be used with ir-kbd-i2c and/or
lirc_zilog.

First up, there are some conditional build fixes that come into play
whether i2c is built-in or modular. Second, we're swapping out
i2c_new_probed_device() for i2c_new_device(), as in my testing, probing
always fails, but we *know* that all hdpvr devices have a z8 chip at
0x70 and 0x71. Third, we're poking at an i2c address directly without a
client, and writing some magic bits to actually turn on this IR part
(this could use some improvement in the future). Fourth, some of the
i2c_adapter storage has been reworked, as the existing implementation
used to lead to an oops following i2c changes c. 2.6.31.

Earlier editions of this patch have been floating around the 'net for a
while, including being patched into Fedora kernels, and they *do* work.
This specific version isn't yet tested, beyond loading ir-kbd-i2c and
confirming that it does bind to the RX address of the hdpvr.

[mchehab@redhat.com: I2C_CLASS_TV_ANALOG is not defined. Fix compilation bug]
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 12:52:20 -02:00
Hans Verkuil
672dcd5477 [media] v4l2-device: fix 'use-after-freed' oops
Fix a bug in v4l2_device_unregister where the sd pointer can be dereferenced
after it was freed.

Normally the i2c adapter is removed before this function is called. Removing
the adapter will also unregister all subdevs on that adapter, so generally
v4l2_device_unregister has nothing to do. However, in the case of a platform
i2c bus that bus is generally not freed.

In that case, after freeing the i2c subdevice the code will fall into the
second block when it tests if the subdev is a SPI device. But by that time
the subdev is already freed and the kernel oopses.

The fix is trivial: continue with the loop after freeing the i2c or spi
subdevice.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:14 -02:00
Hans Verkuil
46b633779b [media] v4l2-dev: don't memset video_device.dev
Zeroing video_device.dev causes a memory leak if video_set_drvdata
was called before video_register_device was called. video_set_drvdata
calls dev_set_drvdata which allocates video_device.dev.p.

memsetting this will prevent freeing of that memory.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:13 -02:00
Hans Verkuil
6ce3ced4f7 [media] zoran: use video_device_alloc instead of kmalloc
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:12 -02:00
Hans Verkuil
bd5ba3ba2e [media] w9966: zero device state after a detach
After a detach zero the whole device state to ensure a clean slate
on the next attach.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:11 -02:00
Laurent Pinchart
eac9aa005a [media] v4l: Fix a use-before-set in the control framework
v4l2_queryctrl sets the step value based on the control type. That would
be fine if it used the control type stored in the V4L2 kernel control
object, not the one stored in the userspace ioctl structure that has
just been memset to 0. Fix this.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:10 -02:00
Hans Verkuil
829fb2dcb5 [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
When queryctrl is called with a V4L2_CID_PRIVATE_BASE control ID, then
currently it is replaced by the real internal ID. This is not according to
the spec so keep the V4L2_CID_PRIVATE_BASE ID in this case.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:15 -02:00
Hans Verkuil
c959acfddb [media] v4l2-ctrls: fix missing 'read-only' check
VIDIOC_S_CTRL did not check against read-only controls. Even worse, for
controls of type CTRL_CLASS it would cause a kernel oops since those controls
do not have a s_ctrl op.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:14 -02:00
Andy Walls
4999e27a62 [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
When registering an IR Rx device with the I2C subsystem, provide more detailed
information about the IR device and default remote configuration for the IR
driver modules.

Also explicitly register any IR Tx device with the I2C subsystem.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:13 -02:00
Andy Walls
c69a4af6f0 [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
This reverts a portion of commit

	44243fc2ef

A commit for which I errantly recommended that defaults for I2C address
0x71 not be set by ir-kbd-i2c.c

The pvrusb2 and bttv drivers currently rely on ir-kbd-i2c setting
defaults for that address.  Until I can get those bridge drivers fixed
to properly send IR_i2c_init_data for boards with Zilog Z8 chips,
just add back the default settings for I2C address 0x71.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:12 -02:00
Christian Gmeiner
b7eccc46a1 [media] adv7175: support s_power
This patch adds s_power support to adv7175 driver. Power-down is done
by power-down all four DACs.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:55 -02:00
Thadeu Lima de Souza Cascardo
e95342f168 [media] DVB: cx231xx drivers does not use dummy frontend anymore
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:48 -02:00
Tejun Heo
a3bc5e3304 [media] v4l/cx18: update workqueue usage
With cmwq, there's no reason to use separate out_work_queue.  Drop it
and use system_wq instead.  The in_work_queue needs to be ordered so
can't use one of the system wqs; however, as it isn't used to reclaim
memory, allocate the workqueue with alloc_ordered_workqueue() without
WQ_MEM_RECLAIM.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:46 -02:00
Jesper Juhl
fd01ad9894 [media] media, tlg2300: Fix memory leak in alloc_bulk_urbs_generic()
Hi,

While reading
drivers/media/video/tlg2300/pd-video.c::alloc_bulk_urbs_generic() I
noticed that

 - We don't free the memory allocated to 'urb' if the call to
   usb_alloc_coherent() fails.
 - If the 'num' argument to the function is ever <= 0 we'll return an
   uninitialized variable 'i' to the caller.

The following patch addresses both of the above by a) calling
usb_free_urb() when usb_alloc_coherent() fails and by explicitly
initializing 'i' to zero.
I also moved the variables 'mem' and 'urb' inside the for loop. This does
not actually make any difference, it just seemed more correct to me to let
variables exist only in the innermost scope they are used.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:45 -02:00
Jean-François Moine
a63d601803 [media] gspca - sonixj: Add LED (illuminator) control to the webcam 0c45:614a
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:43 -02:00
Jean-François Moine
3afef85bfe [media] gspca - sonixj: Infrared bug fix and enhancement
The infrared was set by sensor write instead of bridge GPIO.
It is now settable by the standard control ILLUMINATOR_1.
A module parameter permits to set the right GPIO bit according
to the StarCam model.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:42 -02:00
Jean-François Moine
14b67c2969 [media] gspca - ov534: Propagate errors to higher level
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:41 -02:00
Jean-François Moine
ddffa49e25 [media] gspca - ov534: Clearer debug messages
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:39 -02:00
Jean-François Moine
fc63de88e0 [media] gspca - ov519: Cleanup source and add a comment
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:38 -02:00
Jean-François Moine
ded5e903b7 [media] gspca: Remove useless instructions
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:37 -02:00
Jean-François Moine
95c967c167 [media] gspca: Remove __devinit, __devinitconst and __devinitdata
__devinit* must not be used in USB drivers.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:35 -02:00
Jean-François Moine
0beb6714e7 [media] gspca: Version change
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:33 -02:00
Hans Verkuil
2a863793be [media] v4l2-ctrls: v4l2_ctrl_handler_setup must set is_new to 1
Renamed has_new to is_new.

Drivers can use the is_new field to determine if a new value was specified
for a control. The v4l2_ctrl_handler_setup() must always set this to 1 since
the setup has to force a full update of all controls.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:32 -02:00
Hans Verkuil
45f6f84af3 [media] v4l2-subdev: add (un)register internal ops
Some subdevs need to call into the board code after they are registered
and have a valid struct v4l2_device pointer. The s_config op was abused
for this, but now that it is removed we need a cleaner way of solving this.

So this patch adds a struct with internal ops that the v4l2 core can call.

Currently only two ops exist: register and unregister. Subdevs can implement
these to call the board code and pass it the v4l2_device pointer, which the
board code can then use to get access to the struct that embeds the
v4l2_device.

It is expected that in the future open and close ops will also be added.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:31 -02:00
Hans Verkuil
3c7c9370fb [media] v4l2-subdev: remove core.s_config and v4l2_i2c_new_subdev_cfg()
The core.s_config op was meant for legacy drivers that needed to work with old
pre-2.6.26 kernels. This is no longer relevant. Unfortunately, this op was
incorrectly called from several drivers.

Replace those occurences with proper i2c_board_info structs and call
v4l2_i2c_new_subdev_board.

After these changes v4l2_i2c_new_subdev_cfg() was no longer used, so remove
that function as well.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:30 -02:00
Mauro Carvalho Chehab
ecb71d262b [media] saa7134: Kworld SBTVD: make both analog and digital to work
There are some weird bugs at tda8290/tda18271 initialization, as it
insits do do analog initialization during DVB frontend attach:

DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)...
mb86a20s: mb86a20s_initfe
tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
tda18271_init: [2-0060|M] error -5 on line 830
tda18271_tune: [2-0060|M] error -5 on line 908
tda18271_write_regs
tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
tda18271c2_rf_tracking_filters_correction: [2-0060|M] error -5 on line 265
tda18271_write_regs
tda18271_write_regs: [2-0060|M] ERROR: idx = 0x25, len = 1, i2c_transfer returned: -5
tda18271_channel_configuration: [2-0060|M] error -5 on line 119
tda18271_set_analog_params: [2-0060|M] error -5 on line 1045
tda18271_set_analog_params: [2-0060|M] error -5 on line 1045
tda829x 2-004b: tda8295 not locked, no signal?
tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate
tda829x 2-004b: tda8295 not locked, no signal?
tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate
mb86a20s_i2c_writereg: writereg error (rc == -5, reg == 0x29, data == 0x33)
mb86a20s: Init failed. Will try again later

The problem is that mb86a20s is only visible if the analog part is disabled.

However, due to a trick at mb86a20s, it will later initialize properly:

mb86a20s: mb86a20s_initfe: Initialization succeded.

This is hacky and ugly. However, I coldn't find any easy way to fix it.
A proper fix would be to have a resource locking schema, used by both
V4L and DVB parts that would block access to analog registers while
digital registers are in use, but this will probably put tda829x into
a dead lock.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:28 -02:00
Mauro Carvalho Chehab
6a58bc0f50 [media] saa7134: Fix digital mode on Kworld SBTVD
This patch fixes digital mode on Kworld SBTVD. Unfortunately, it disables
analog mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:27 -02:00
Mauro Carvalho Chehab
6183040680 [media] saa7134: Fix analog mode for Kworld SBTVD
There were some issues at tda8290 that were preventing this device
to work. Now that those fixes were fixed, we can enable analog
mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:26 -02:00
Mauro Carvalho Chehab
5a85025f7d [media] em28xx: Fix IR support for WinTV USB2
Due to a lack of a break inside the switch, it were getting the
wrong keytable and get_key function.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:19 -02:00
Mauro Carvalho Chehab
e6bcb2f324 [media] ir-kbd-i2c: Make IR debug messages more useful
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:18 -02:00
Hans Verkuil
a1198ccf9c [media] v4l2-ioctl: fix incorrect error code if VIDIOC_DBG_G/S_REGISTER are unsupported
The ioctls VIDIOC_DBG_S_REGISTER and VIDIOC_DBG_G_REGISTER should return -EINVAL
if the driver didn't implement them. Currently they return -EPERM if called as
non-root user. However, this check should only be done if the driver actually
implemented these ioctls. Otherwise, just return -EINVAL as we do with all
unimplemented ioctls.

This bug make the v4l2-compliance test suite fail.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:13 -02:00
Hans de Goede
4c77590225 [media] gspca_sonixb: Fix mirrored image with ov7630
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:12 -02:00
Hans de Goede
e48d38f7f1 [media] gspca_sonixj: Add one more commented out usb-id
While going through windows inf file I found more usb-id, add a comment
with this id for future reference.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:11 -02:00
Hans de Goede
e530a5e3cf [media] gspca_sonixj: Probe sensor type independent of bridge type
Looking at the windows inf file, for usb ids with a sensor type where probing
is needed to determine the type (for example ov7630 or soi768), this is
needed for all bridge variants with a usb id indicating this sensor type.

So do the probing to determine the actual sensor type for types where the
usb-id info is not 100% deterministic, independent of the bridge type.

If you look through the list of currently active usb ids in sonixj, this
effectively only changes the code path for 0c45:60fe (sn9c105 + ov7630) and
0c45:612e (sn9c110 + ov7630), which according to the inf file can have a
soi768 instead of a ov7630 just like the sn9c120 + ov7630 models where we
already probe for a soi7630.

The main reason for this code change is to keep the code paths as bridge
variant independent as possible, so that we don't need a lot of special
per bridge cases, as we enable more usb-ids in the future.

This change makes the 0c45:60fe code path identical to the successfully
tested 0c45:613e, so also make sonixj the default driver for 0c45:60fe.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:10 -02:00
Hans de Goede
4944e27d85 [media] gspca_sonixj: Enable more usb ids when sn9c102 gets compiled too
Both we and the windows driver make no sensor specific differences
(with some exceptions) for different sonixj bridge types. Thus if a
sn9c105 bridge has been successfully tested with a sensor, the same
sensor can be successfully used with a sn9c120 bridge too.

Using this knowledge we can move over most usb-ids too the sonixj
driver when both are compiled.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:08 -02:00
Hans de Goede
69ffd25457 [media] gspca_sonixb: Add usb ids for known sn9c103 cameras
Now that our bridge code is unified for sn9c101/102 and sn9c103 models,
the sn9c103 models should simply work, given that the only difference
in the sn9c103 is audio support and a gamma correction table.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:07 -02:00
Hans de Goede
4e17cd2eac [media] gspca_sonixb: TAS5130C brightness control really is a gain control
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:07 -02:00
Hans de Goede
0d0d7ef71e [media] gspca_sonixb: Fix TAS5110D sensor gain control
Also fix the issue of the image being mirrored.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:06 -02:00
Hans de Goede
f913c001cd [media] gspca_sonixb: Adjust autoexposure window for vga cams so that it is centered
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:05 -02:00
Hans de Goede
0a76cb8cef [media] gspca_sonixb: Refactor to unify bridge handling
Refactor the code to unify how the sn9c101/102 and the sn9c103 bridge
are handled. Also move code which is the same for all sensors from
the per sensor init register settings to a central place.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:03 -02:00
Hans de Goede
a24f0c5c47 [media] sn9c102: Remove not supported and non existing usb ids
The sn9c102 driver claims a number of usb-ids which are for cameras
with sensor types which it does not support. Also it claims a number
of usb-ids which do not exist at all (not present in the windows
drivers .inf files, not known by google).

This patch also fixes the conflict with the gspca_sonixj driver for the
0c45:60c0 and 0c45:60fb usb ids.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:02 -02:00
Hans de Goede
8b064ee19d [media] et61x251: remove wrongly claimed usb ids
The et61x251 driver claims a whole list of usb id's, but it only has
one sensor "module" which does sensor detection based on usb id and that
only supports devices with the 102c:6251 usb id. Remove the usb-ids for
other devices as for those the driver will fail with an unable to determine
sensor type message anyways.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:01 -02:00
Hans de Goede
0d0ae15dde [media] gspca_main: wake wq on streamoff
We check for not streaming as a condition to abort waiting in dqbuf, so
when another thread does a streamoff we should wake the wq.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:00 -02:00
Hans de Goede
ce5610bca7 [media] gspca_main: Allow switching from read to mmap / userptr mode
Some applications (xawtv, qv4l2) mix read and mmap calls. Allow switching
from read mode back to mmap mode (by doing a reqbufs).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:44:59 -02:00
Hans de Goede
ee3629914b [media] gspca_main: Simplify read mode memory type checks
gspca_dev->memory == GSPCA_MEMORY_NO implies gspca_dev->nframes == 0,
so there is no need to check for both in dev_poll. The check in
dev_read also is more complex then needed, as dqbuf which dev_read
calls already does all necessary checks. Moreover dqbuf is holding
the proper locks while checking where as dev_read itself is not.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:44:58 -02:00
Hans de Goede
d642de2ed4 [media] gspca_main: Set memory type to GSPCA_MEMORY_NO on buffer release
Before this patch we were not setting the memory type to GSPCA_MEMORY_NO
when the buffers were released by the app doing a reqbufs 0. Nor would
the memory type be set to GSPCA_MEMORY_NO on device close, as capture_file
already is NULL on device close because of the reqbufs 0. This caused the
following problem:
-app1 does reqbufs USERPTR for 4 buffers
-app1 does reqbufs USERPTR for 0 buffers
-app2 tries to do reqbufs MMAP for 4 buffers
 fails because gspca_dev->memory still is USERPTR

Fixing this also allows an app to switch memory type's by unrequesting
the buffers and re-requesting them of a different type.

This patch also moves the setting of gspca_dev->frsz and gscpa_dev->memory
to after alloc_frame succeeding, so that they are not changed when allocating
fails.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:44:57 -02:00
Hans de Goede
7f6eb118df [media] gspca_main: Remove no longer used users variable
Remove the no longer used / useful users variable, and with that gone
there also is no longer a need to take queue_lock in dev_open.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:44:56 -02:00
Hans de Goede
4a82bc60a9 [media] gspca_main: Update buffer flags even when user_copy fails
Before this patch dqbuf errors out on a failing user_copy (with user pointers)
before updating the buffer flags, causing a successsfully dequeued buffer
to still have the DONE flag, which means that it could no longer be
re-queueud (assuming the app somehow survives the segfault).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:44:55 -02:00
Hans de Goede
27074efa2e [media] gspca_main: Locking fixes 2
Before this patch vidioc_dqbuf is using its own read_lock, where as
other queue related functions use queue_lock. This means that dqbuf is
accessing several variables in a racy manor. The most important one
being fr_o, which may be changed from underneath dqbuf by vidioc_reqbufs
or vidioc_streamoff. Other variables which it accesses unprotected
are gspca_dev->memory, gspca_dev->streaming and gspca_dev->capt_file.

This patch fixes this by changing vidioc_dqbuf to also use the queue_lock.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:44:54 -02:00
Hans de Goede
4e770f7602 [media] gspca_main: Locking fixes 1
The gspca_dev->streaming boolean is protected against multiple access
through gspca_dev->queue_lock everywhere except for 2 places. This patch
fixes this by bringing it under the lock in vidioc_streamoff. And by
removing the check for gspca_dev->streaming in gspca_disconnect,
the destroy_urbs call may be called multiple times (and is protected
by the usb_lock) and calling wake_up_interruptible can also always be done
safely.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:44:53 -02:00
Hans Verkuil
9bfaae24f9 [media] davinci: convert vpif_display to core-assisted locking
vpif_display now uses .unlocked_ioctl instead of .ioctl.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:21 -02:00
Hans Verkuil
46656afa8a [media] davinci: convert vpif_capture to core-assisted locking
Now uses .unlocked_ioctl instead of .ioctl.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:20 -02:00
Mats Randgaard
2c0ddd1774 [media] vpif_cap/disp: Cleanup, improved comments
Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Murali Karicheri <mkaricheri@gmail.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:19 -02:00
Mats Randgaard
c027e165d2 [media] vpif_cap/disp: Added support for DV timings
Added functions to set and get custom DV timings.

Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:17 -02:00
Mats Randgaard
40c8bcea6b [media] vpif_cap/disp: Add support for DV presets
- Added functions to set/get/query/enum DV presets for vpif_caputre and
  vpif_display.
- The format specification table is extended with all the DV formats
  supported by TVP7002.

Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:16 -02:00
Mats Randgaard
aa44440635 [media] vpif: Consolidate formats from capture and display
- The ch_params tables in vpif_capture.c and vpif_display.c are moved to a common
  table in vpif.c. Then it is easier to maintain the table.
- The field "fps" is removed from the struct vpif_channel_config_params because it
  is not used.

Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by : Murali Karicheri <mkaricheri@gmail.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:15 -02:00
Mats Randgaard
7036d6a73c [media] vpif_cap/disp: Add debug functionality
The following functions are added to the drivers:
    - vpif_g_chip_ident
    - vpif_dbg_g_register
    - vpif_dbg_s_register
    - vpif_log_status

Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:14 -02:00
Hans Verkuil
d2db8fee0d [media] cpia2: convert .ioctl to .unlocked_ioctl
Implement core-assisted locking in cpia2.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:12 -02:00
Hans Verkuil
b219ab9cfb [media] bttv: remove obsolete 'no_tda9875' field
Since tda9875 is part of tvaudio this field no longer makes sense. Remove it.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:09 -02:00
Hans Verkuil
f037484337 [media] tda9875: remove duplicate driver
In commit 411674fd18 the tda9875 support was
added to tvaudio. This means that tda9875 is no longer used since mid-2009.

If there are out-of-tree users of this driver, then they can switch to tvaudio
instead.

The original commit message read as follows:

    This change allows bttv to use tvaudio for this device. Since this device
    has the same i2c address as the tda9874 we need to support both in the same
    tvaudio driver. This makes it possible for tvaudio to detect which chip is
    used. Originally the tda9875 was only available in the dedicated tda9875
    driver, but that makes life very hard for bttv since loading tvaudio might
    misdetect a tda9875 as a tda9874.

So there were good reasons for moving the tda9875 code into tvaudio.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:28:08 -02:00
Linus Torvalds
d73b388459 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Report wakeup events before resuming devices
  PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
  PCI: sysfs: Update ROM to include default owner write access
  x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
  x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
  PCI/ACPI: Request _OSC control once for each root bridge (v3)
  PCI: enable pci=bfsort by default on future Dell systems
  PCI/PCIe: Clear Root PME Status bits early during system resume
  PCI: pci-stub: ignore zero-length id parameters
  x86/PCI: irq and pci_ids patch for Intel Patsburg
  PCI: Skip id checking if no id is passed
  PCI: fix __pci_device_probe kernel-doc warning
  PCI: make pci_restore_state return void
  PCI: Disable ASPM if BIOS asks us to
  PCI: Add mask bit definition for MSI-X table
  PCI: MSI: Move MSI-X entry definition to pci_regs.h

Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)
2011-01-14 09:29:05 -08:00
Linus Torvalds
008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Linus Torvalds
23d69b09b7 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)
  usb: don't use flush_scheduled_work()
  speedtch: don't abuse struct delayed_work
  media/video: don't use flush_scheduled_work()
  media/video: explicitly flush request_module work
  ioc4: use static work_struct for ioc4_load_modules()
  init: don't call flush_scheduled_work() from do_initcalls()
  s390: don't use flush_scheduled_work()
  rtc: don't use flush_scheduled_work()
  mmc: update workqueue usages
  mfd: update workqueue usages
  dvb: don't use flush_scheduled_work()
  leds-wm8350: don't use flush_scheduled_work()
  mISDN: don't use flush_scheduled_work()
  macintosh/ams: don't use flush_scheduled_work()
  vmwgfx: don't use flush_scheduled_work()
  tpm: don't use flush_scheduled_work()
  sonypi: don't use flush_scheduled_work()
  hvsi: don't use flush_scheduled_work()
  xen: don't use flush_scheduled_work()
  gdrom: don't use flush_scheduled_work()
  ...

Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c
as per Tejun.
2011-01-07 16:58:04 -08:00
Linus Torvalds
3e5b08cbbf Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits)
  USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  USB: serial: ftdi_sio: add support for TIOCSERGETLSR
  USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()
  usb: ehci-omap: fix tll channel enable mask
  usb: ohci-omap3: fix trivial typo
  USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096
  USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's
  USB: gadget: update ci13xxx to work with g_ether
  USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers
  Revert "USB: musb: pm: don't rely fully on clock support"
  Revert "USB: musb: blackfin: pm: make it work"
  USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
  USB: uas: Ensure we only bind to a UAS interface
  USB: uas: Rename sense pipe and sense urb to status pipe and status urb
  USB: uas: Use kzalloc instead of kmalloc
  USB: uas: Fix up the Sense IU
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  usb: gadget: g_ncm added
  ...

Manually fix up trivial conflicts in USB Kconfig changes in:
	arch/arm/mach-omap2/Kconfig
	arch/sh/Kconfig
	drivers/usb/Kconfig
	drivers/usb/host/ehci-hcd.c
and annoying chip clock data conflicts in:
	arch/arm/mach-omap2/clock3xxx_data.c
	arch/arm/mach-omap2/clock44xx_data.c
2011-01-07 13:16:28 -08:00
Linus Torvalds
9e9bc97367 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (255 commits)
  [media] radio-aimslab.c: Fix gcc 4.5+ bug
  [media] cx25821: Fix compilation breakage due to BKL dependency
  [media] v4l2-compat-ioctl32: fix compile warning
  [media] zoran: fix compiler warning
  [media] tda18218: fix compile warning
  [media] ngene: fix compile warning
  [media] DVB: IR support for TechnoTrend CT-3650
  [media] cx23885, cimax2.c: Fix case of two CAM insertion irq
  [media] ir-nec-decoder: fix repeat key issue
  [media] staging: se401 depends on USB
  [media] staging: usbvideo/vicam depends on USB
  [media] soc_camera: Add the ability to bind regulators to soc_camedra devices
  [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor
  [media] v4l: soc-camera: switch to .unlocked_ioctl
  [media] v4l: ov772x: simplify pointer dereference
  [media] ov9640: fix OmniVision OV9640 sensor driver's priv data retrieving
  [media] ov9640: use macro to request OmniVision OV9640 sensor private data
  [media] ivtv-i2c: Fix two warnings
  [media] staging/lirc: Update lirc TODO files
  [media] cx88: Remove the obsolete i2c_adapter.id field
  ...
2011-01-06 18:32:12 -08:00
Hans Verkuil
36f54ff67b [media] v4l2-compat-ioctl32: fix compile warning
drivers/media/video/v4l2-compat-ioctl32.c: In function 'get_v4l2_format32':
drivers/media/video/v4l2-compat-ioctl32.c:169:2: warning: case value '0' not in enumerated type 'enum v4l2_buf_type'
drivers/media/video/v4l2-compat-ioctl32.c: In function 'put_v4l2_format32':
drivers/media/video/v4l2-compat-ioctl32.c:200:2: warning: case value '0' not in enumerated type 'enum v4l2_buf_type'

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-04 16:47:50 -02:00
Hans Verkuil
1a5e5af0d2 [media] zoran: fix compiler warning
drivers/media/video/zoran/zoran_driver.c: In function 'zoran_dqbuf':
drivers/media/video/zoran/zoran_driver.c:2197:21: warning: 'bs.frame' may be used uninitialized in this function

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-04 16:47:49 -02:00
Justin P. Mattock
eb78bd7d8a media: comment typo fix diable -> disable.
The below patch fixes a typo "diable" to "disable".

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-03 16:03:38 +01:00
Hans Verkuil
8fd0bda511 [media] em28xx: radio_fops should also use unlocked_ioctl
em28xx uses core assisted locking, so it shouldn't use .ioctl.
The .ioctl callback was replaced by .unlocked_ioctl for video nodes,
but not for radio nodes. This is now corrected.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-03 09:52:25 -02:00
Mauro Carvalho Chehab
46e67acd5d [media] wm8775: Revert changeset fcb9757333 to avoid a regression
It seems that cx88 and ivtv use wm8775 on some different modes. The
patch that added support for a board with wm8775 broke ivtv boards with
this device. As we're too close to release 2.6.37, let's just revert
it.

Reported-by: Andy Walls <awalls@md.metrocast.net>
Reported-by: Eric Sharkey <eric@lisaneric.org>
Reported-by: Auric <auric@aanet.com.au>
Reported by: David Gesswein <djg@pdp8online.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-03 09:09:56 -02:00
Andy Walls
f23b7952d3 [media] cx25840: Prevent device probe failure due to volume control ERANGE error
This patch fixes a regression that crept into 2.6.36.

The volume control scale in the cx25840 driver has an unusual mapping
from register values to v4l2 volume control values.  Enforce the mapping
limits, so that the default volume control setting does not fall out of
bounds to prevent the cx25840 module device probe from failing.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-03 09:08:16 -02:00
Igor M. Liplianin
ebce9a3331 [media] cx23885, cimax2.c: Fix case of two CAM insertion irq
For example  boot up with two CAM inserted.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-31 13:46:20 -02:00
Alberto Panizzo
96e442c1b2 [media] soc_camera: Add the ability to bind regulators to soc_camedra devices
In certain machines, camera devices are supplied directly
by a number of regulators. This patch add the ability to drive
these regulators directly by the soc_camera driver.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 22:29:37 -02:00
Alberto Panizzo
3153ac9c62 [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 22:29:34 -02:00
Guennadi Liakhovetski
b6a633c18b [media] v4l: soc-camera: switch to .unlocked_ioctl
Use the V4L mutex infrastructure in soc-camera core and drivers and switch to
.unlocked_ioctl.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 22:29:26 -02:00
Guennadi Liakhovetski
c85bb69af0 [media] v4l: ov772x: simplify pointer dereference
Use a more direct way to obtain a pointer to struct ov772x_priv, where the
subdevice is available.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 22:29:23 -02:00
David Cohen
63c9718c1a [media] ov9640: fix OmniVision OV9640 sensor driver's priv data retrieving
OmniVision OV9640 driver wasn't requesting properly its private data
on I2C remove and video_probe functions. It was retrieving the V4L2
subdev struct address instead of priv struct's one. This patch fixes
such problem.

Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 22:29:21 -02:00
David Cohen
f7b74f76a3 [media] ov9640: use macro to request OmniVision OV9640 sensor private data
This cleanup patch creates macro to request OmniVision OV9640 private
data, which increases readability.

Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 22:29:20 -02:00
Mauro Carvalho Chehab
9804ed9e84 [media] ivtv-i2c: Fix two warnings
Fix two gcc warnings:

drivers/media/video/ivtv/ivtv-i2c.c:170: warning: cast from pointer to integer of different size
drivers/media/video/ivtv/ivtv-i2c.c:171: warning: cast from pointer to integer of different size
$ gcc --version
gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-48)

They seem bogus, but, as the original code also has problems with
LE/BE, just change its implementation to be clear.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 13:06:35 -02:00
Mauro Carvalho Chehab
6a23a520c0 [media] cx88: Remove the obsolete i2c_adapter.id field
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 12:17:19 -02:00
Andy Walls
a9cd591e29 [media] ir-kbd-i2c: Add HD PVR IR Rx support to ir-kbd-i2c
Add HD PVR IR Rx support to ir-kbd-i2c

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 12:17:16 -02:00
Andy Walls
ea6c06033f [media] hdpvr: Add I2C and ir-kdb-i2c registration of the Zilog Z8 IR chip
Adds I2C registration of the Zilog Z8F0811 IR microcontroller for either
lirc_zilog or ir-kbd-i2c to use.  This is a required step in removing
lirc_zilog's use of the deprecated struct i2c_adapter.id field.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 12:17:14 -02:00
Mauro Carvalho Chehab
8a6334fc91 [media] ivtv-i2c: Don't use IR legacy mode for Zilog IR
The Zilog IR entries are already handled by IR new code. So,
remove its usage from the legacy IR support.

Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 12:17:10 -02:00
Mauro Carvalho Chehab
e1e2c57565 [media] ivtv: Add Adaptec Remote Controller
lirc-i2c implements a get key logic for the Adaptec Remote
Controller, at address 0x6b. The only driver that seems to have
an Adaptec device is ivtv:

$ git grep -i adaptec drivers/media
drivers/media/video/cs53l32a.c: * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver.
drivers/media/video/cs53l32a.c: * Audio source switching for Adaptec AVC-2410 added by Trev Jackson
drivers/media/video/cs53l32a.c:   /* Set cs53l32a internal register for Adaptec 2010/2410 setup */
drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2410 card */
drivers/media/video/ivtv/ivtv-cards.c:    { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0093 },
drivers/media/video/ivtv/ivtv-cards.c:    .name = "Adaptec VideOh! AVC-2410",
drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2010 card */
drivers/media/video/ivtv/ivtv-cards.c:    { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0092 },
drivers/media/video/ivtv/ivtv-cards.c:    .name = "Adaptec VideOh! AVC-2010",
drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2410         7 /* Adaptec AVC-2410 */
drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2010         8 /* Adaptec AVD-2010 (No Tuner) */
drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_PCI_ID_ADAPTEC                 0x9005
drivers/media/video/ivtv/ivtv-driver.c:            "\t\t\t 8 = Adaptec AVC-2410\n"
drivers/media/video/ivtv/ivtv-driver.c:            "\t\t\t 9 = Adaptec AVC-2010\n"
drivers/media/video/ivtv/ivtv-i2c.c:              0x6b,   /* Adaptec IR */

There are two Adaptec cards defined there, but AVC-2010 doesn't have a
remote controller. So, the logic at lirc_i2c seems to be for Adaptec AVC-2410.

As we'll remove lirc_i2c from kernel, move the getkey code to ivtv driver, and
use it for AVC-2410.

Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 12:17:08 -02:00
Mauro Carvalho Chehab
1c0eb0ffb0 [media] cx88: Add RC logic for Leadtek PVR 2000
Currently, lirc-i2c has a decoding logic for Leadtek Remote
Control. Move it to cx88, as we intend to remove lirc-i2c.

For now, initialize LIRC remote keytable with RC_MAP_EMPTY, as
we don't know its keymap yet. It would be nice to later check
if is there any file on LIRC userspace with that keytable.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 12:17:06 -02:00
Mauro Carvalho Chehab
b22374544b [media] bttv-input: Add a note about PV951 RC
When comparing lirc-i2c and ir-kbd-i2c/bttv-input logic, a difference
was noticed. As lirc-i2c will be removed soon, store the difference on
a comment inside ir-kbd-i2c, in order to preserve the knowledge we
have about that remote controller.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 12:17:05 -02:00
Hans Verkuil
61ea3aa5bf [media] timblogiw: fix compile warning
Fix 64-bit compile warning:

drivers/media/video/timblogiw.c: In function ‘timblogiw_dma_filter_fn’:
drivers/media/video/timblogiw.c:151: warning: cast from pointer to integer of different size
drivers/media/video/timblogiw.c: In function ‘timblogiw_open’:
drivers/media/video/timblogiw.c:670: warning: cast to pointer from integer of different size

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Richard Rojförs <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 08:02:35 -02:00
Hans Verkuil
657f227105 [media] v4l: fix handling of v4l2_input.capabilities
The v4l core sets the v4l2_input.capabilities field based on the supplied
v4l2_ioctl_ops. However, several drivers do a memset or memcpy of the v4l2_input
struct, thus overwriting that field incorrectly.

Either remove the memset (which is already done by the v4l core), or add the
proper capabilities field in case of a memcpy.

The same is also true for v4l2_output, but that only affected the ivtv driver.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 08:02:29 -02:00
Hans Verkuil
3ea2b673a5 [media] em28xx: fix incorrect s_ctrl error code and wrong call to res_free
Calling subdevs to handle s_ctrl returned a non-zero return code even if
everything went fine.

Calling STREAMOFF if no STREAMON happened earlier would hit a BUG_ON
in res_free.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 08:02:23 -02:00
Hans Verkuil
02ac04805e [media] v4l2-ctrls: only check def for menu, integer and boolean controls
The 'def' field is only valid for menus, integers and booleans.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30 08:02:18 -02:00