The previous behavior was a little unexpected, its properties/problems:
1. It was designed to generate strictly increasing values (no repeats)
2. It had quantization errors when calculating step size. Resulting in
unexpected jumps near the end of some segments.
Example settings:
brightness-levels = <0 1 2 4 8 16 32 64 128 256>;
num-interpolated-steps = <16>;
Whenever num-interpolated-steps was larger than the distance
between 2 consecutive brightness levels the table would get really
discontinuous. The slope of the interpolation would stick with
integers only and if it was 0 the whole line segment would get skipped.
The distances between 1 2 4 and 8 would be 1 (property #1 fighting us),
and only starting with 16 it would start to interpolate properly.
Property #1 is not enough. The goal here is more than just monotonically
increasing. We should still care about the shape of the curve. Repeated
points might be desired if we're in the part of the curve where we want
to go slow (aka slope near 0).
Problem #2 is plainly a bug. Imagine if the 64 entry was 63 instead,
the calculated slope on the 32-63 segment will be almost half as it
should be.
The most expected and simplest algorithm for interpolation is linear
interpolation, which would handle both problems.
Let's just implement that!
Take pairs of points from the brightness-levels array and linearly
interpolate between them. On the X axis (what userspace sees) we'll
now have equally sized intervals (num-interpolated-steps sized,
as opposed to before where we were at the mercy of quantization).
Signed-off-by: Alexandru Stan <amstan@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Tosa backlight driver was converted to use GPIO descriptors
in 0b0cb52bd8
("video: backlight: tosa: Use GPIO lookup table") but
still includes <linux/gpio.h> rather than <linux/gpio/consumer.h>.
Fix it.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Tosa backlight LCDE driver was converted to use GPIO descriptors
in 0b0cb52bd8
("video: backlight: tosa: Use GPIO lookup table") but
still includes <linux/gpio.h> rather than <linux/gpio/consumer.h>.
Fix it.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Kinetic KTD253 backlight driver is controlled with a
single GPIO line, but still supports a range of brightness
settings by sending fast pulses on the line.
This is based off the source code release for the Samsung
GT-S7710 mobile phone.
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When of_property_read_u32_array() returns an error code, a
pairing refcount decrement is needed to keep np's refcount
balanced.
Fixes: f705806c9f ("backlight: Add support Skyworks SKY81452 backlight driver")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some types
of hardware can generate the full range of signals that they're capable
of. The remainder is mostly minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=v6MG
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some
types of hardware can generate the full range of signals that they're
capable of.
The remainder is mostly minor fixes and cleanups"
* tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: bcm-iproc: handle clk_get_rate() return
pwm: Replace HTTP links with HTTPS ones
pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header
pwm: mediatek: Provide missing kerneldoc description for 'soc' arg
pwm: bcm-kona: Remove impossible comparison when validating duty cycle
pwm: bcm-iproc: Remove impossible comparison when validating duty cycle
pwm: iqs620a: Use lowercase hexadecimal literals for consistency
pwm: Convert period and duty cycle to u64
clk: pwm: Use 64-bit division function
backlight: pwm_bl: Use 64-bit division function
pwm: sun4i: Use nsecs_to_jiffies to avoid a division
pwm: sifive: Use 64-bit division macro
pwm: iqs620a: Use 64-bit division
pwm: imx27: Use 64-bit division macro
pwm: imx-tpm: Use 64-bit division macro
pwm: clps711x: Use 64-bit division macro
hwmon: pwm-fan: Use 64-bit division macro
drm/i915: Use 64-bit division macro
There are no external users of of_find_backlight, as they have all
changed to use the managed version. Make of_find_backlight static to
prevent new external users.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There are no external users of backlight_put(). Drop it and open code
the two users in backlight.c.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Introduce the backlight_get_brightness() helper in all
video/backlight/* drivers. This simplifies the code and align the
implementation of the update_status() operation across the different
backlight drivers.
Some of the drivers gains a little extra functionality by the change
as they now respect the fb_blank() ioctl.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use the backlight_is_blank() helper to simplify the code a bit.
The jornada720_bl driver distinguish between backlight off
and brightness set to 0.
Thus this driver turn off backlight only when backlight_is_blank()
returns true.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Introduce the use of backlight_get_brightness() to simplify the
update_status() operation. With the simpler implementation drop the
gpio_backlight_get_next_brightness() helper as it was now a
one-liner.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
cr_bllcd can turn backlight ON or OFF.
Fix semantitics so they equals what we know from gpio-backlight.
brightness == 0 => backlight off
brightness == 1 => backlight on
Use the backlight_get_brightness() helper to simplify the code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Replaces the open-coded checks of the state, with the
backlight_get_brightness() helper. This increases readability of the
code and align the functionality across the drivers.
Furthermore drop the debug prints in update_status().
If we need debug printing then we can add it to the backlight core.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add overview chapter to backlight.c.
Update existing kernel-doc to follow a more consistent style and drop
kernel-doc for deprecated functions.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The backlight_bl driver required initialization using
struct generic_bl_info. As there are no more references
to this struct there is no users left.
So it is safe to delete the driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Increase readability of fb_notifier_callback() by removing
a few indent levels.
No functional change.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Firstly, all lines must begin with a '*'. Secondly, arg descriptions
must be spelt correctly, so fix misspelling of 'gpioD_enable' and
'short_detecTion_threshold'
Fixes the following W=1 kernel build warning(s):
drivers/video/backlight/sky81452-backlight.c:46: warning: bad line: If it is not defined, default name is lcd-backlight.
drivers/video/backlight/sky81452-backlight.c:64: warning: Function parameter or member 'gpiod_enable' not described in 'sky81452_bl_platform_data'
drivers/video/backlight/sky81452-backlight.c:64: warning: Function parameter or member 'short_detection_threshold' not described in 'sky81452_bl_platform_data'
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Fixes W=1 warnings:
drivers/video/backlight/qcom-wled.c:1294:34: warning: ‘wled4_string_cfg’ defined but not used [-Wunused-const-variable=]
1294 | static const struct wled_var_cfg wled4_string_cfg = {
| ^~~~~~~~~~~~~~~~
drivers/video/backlight/qcom-wled.c:1290:34: warning: ‘wled3_string_cfg’ defined but not used [-Wunused-const-variable=]
1290 | static const struct wled_var_cfg wled3_string_cfg = {
| ^~~~~~~~~~~~~~~~
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
unsigned ints 'sources' and 'bank' cannot be less than LM3630A_SINK_0 (0)
and LM3630A_BANK_0 (0) respecitively, so change the logic to only check
for thier two possible valid values.
Fixes W=1 warnings:
drivers/video/backlight/lm3630a_bl.c: In function ‘lm3630a_parse_led_sources’:
drivers/video/backlight/lm3630a_bl.c:394:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
394 | if (sources[i] < LM3630A_SINK_0 || sources[i] > LM3630A_SINK_1)
| ^
drivers/video/backlight/lm3630a_bl.c: In function ‘lm3630a_parse_bank’:
drivers/video/backlight/lm3630a_bl.c:415:11: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
415 | if (bank < LM3630A_BANK_0 || bank > LM3630A_BANK_1)
| ^
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Jeong <gshark.jeong@gmail.com>
Cc: LDD MLP <ldd-mlp@list.ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Kerneldoc syntax is used, but not complete. Descriptions required.
Prevents warnings like:
drivers/video/backlight/backlight.c:329: warning: Function parameter or member 'reason' not described in 'backlight_force_update'
drivers/video/backlight/backlight.c:354: warning: Function parameter or member 'props' not described in 'backlight_device_register'
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jamey Hicks <jamey.hicks@hp.com>
Cc: Andrew Zabolotny <zap@homelink.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Kerneldoc syntax is used, but not complete. Descriptions required.
Prevents warnings like:
drivers/video/backlight/ili922x.c:298: warning: Function parameter or member 'spi' not described in 'ili922x_reg_dump'
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Software Engineering <sbabic@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Kerneldoc is for documenting function arguments and return values.
Prevents warnings like:
drivers/video/backlight/ili922x.c:127: warning: cannot understand function prototype: 'int ili922x_id = 1; '
drivers/video/backlight/ili922x.c:136: warning: cannot understand function prototype: 'struct ili922x '
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Software Engineering <sbabic@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Kerneldoc syntax is used, but not complete. Descriptions required.
Prevents warnings like:
drivers/video/backlight/ili922x.c:116: warning: Function parameter or member 's' not described in 'CHECK_FREQ_REG'
drivers/video/backlight/ili922x.c:116: warning: Function parameter or member 'x' not described in 'CHECK_FREQ_REG'
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Software Engineering <sbabic@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This has been missing since the conversion to 'struct device' in 2007.
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jamey Hicks <jamey.hicks@hp.com>
Cc: Andrew Zabolotny <zap@homelink.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
W=1 kernel build reports:
drivers/video/backlight/lms501kf03.c:96:28: warning: ‘seq_sleep_in’ defined but not used [-Wunused-const-variable=]
96 | static const unsigned char seq_sleep_in[] = {
| ^~~~~~~~~~~~
drivers/video/backlight/lms501kf03.c:92:28: warning: ‘seq_up_dn’ defined but not used [-Wunused-const-variable=]
92 | static const unsigned char seq_up_dn[] = {
| ^~~~~~~~~
Either 'seq_sleep_in' nor 'seq_up_dn' have been used since the
driver first landed in 2013.
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This driver includes <linux/gpio.h> but does not use any
symbols from that file, drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This driver has no in-kernel users. The device can only be populated
by board files since it does not support device tree nor ACPI,
and nothing in the kernel creates a device named "ot200-backlight".
This driver has been in the kernel since 2012. If it is used by
out-of-tree code that code should have been upstreamed by now,
it's been 8 years.
It uses the idiomatic forked GPIO of the CS5535 which combines
pin control and GPIO into its private custom interface, which
causes me a headache because that is not how we do things these
days: we creates separate pin control and GPIO drivers.
Delete this unused driver.
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The only way the platform data for the SKY81452 ever gets populated
is through the device tree.
The MFD device is bothered with this for no reason at all. Just
allocate the platform data in the driver and be happy.
Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The SKY81452 backlight driver just obtains a GPIO (named "gpios"
in the device tree) drives it high and leaves it high until the
driver is removed.
Switch to use GPIO descriptors for this, simple and
straight-forward.
Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Move away from the deprecated API and return the shiny new ERRPTR where
useful.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since the PWM framework is switching struct pwm_state.period's datatype
to u64, prepare for this transition by using div_u64 to handle a 64-bit
dividend instead of a straight division operation.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Use kobj_to_dev() instead of container_of()
Signed-off-by: Wang Qing <wangqing@vivo.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add a way to lookup a backlight device based on its name.
Will be used by a USB display gadget getting the name from configfs.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
PM8150L WLED supports the following:
- Two modulators and each sink can use any of the modulator
- Multiple CABC selection options from which one can be selected/enabled
- Multiple brightness width selection (12 bits to 15 bits)
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add wled_cabc_config, wled_sync_toggle, wled_ovp_fault_status
and wled_ovp_delay and wled_auto_detection_required callback
functions to prepare the driver for adding WLED5 support.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This converts the l4f00242t03 backlight driver to use GPIO
descriptors and switches the two Freescale i.MX boards over
to passing descriptors instead of global GPIO numbers.
We use the typical names "enable" and "reset" as found in
the device tree bindings for panel GPIOs.
This saves a lot of code in the driver and makes it possible
to get rid of the platform data header altogether.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
If probing the LP885x backlight fails after the regulators have been
enabled, then the following warning is seen when releasing the
regulators ...
WARNING: CPU: 1 PID: 289 at drivers/regulator/core.c:2051 _regulator_put.part.28+0x158/0x160
Modules linked in: tegra_xudc lp855x_bl(+) host1x pwm_tegra ip_tables x_tables ipv6 nf_defrag_ipv6
CPU: 1 PID: 289 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200224 #1
Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
...
Call trace:
_regulator_put.part.28+0x158/0x160
regulator_put+0x34/0x50
devm_regulator_release+0x10/0x18
release_nodes+0x12c/0x230
devres_release_all+0x34/0x50
really_probe+0x1c0/0x370
driver_probe_device+0x58/0x100
device_driver_attach+0x6c/0x78
__driver_attach+0xb0/0xf0
bus_for_each_dev+0x68/0xc8
driver_attach+0x20/0x28
bus_add_driver+0x160/0x1f0
driver_register+0x60/0x110
i2c_register_driver+0x40/0x80
lp855x_driver_init+0x20/0x1000 [lp855x_bl]
do_one_initcall+0x58/0x1a0
do_init_module+0x54/0x1d0
load_module+0x1d80/0x21c8
__do_sys_finit_module+0xe8/0x100
__arm64_sys_finit_module+0x18/0x20
el0_svc_common.constprop.3+0xb0/0x168
do_el0_svc+0x20/0x98
el0_sync_handler+0xf4/0x1b0
el0_sync+0x140/0x180
Fix this by ensuring that the regulators are disabled, if enabled, on
probe failure.
Finally, ensure that the vddio regulator is disabled in the driver
remove handler.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
- Switch to GPIO descriptor; pwm_bl, corgi_lcd
-----BEGIN PGP SIGNATURE-----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=LJj4
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Switch pwm_bl and corgi_lcd drivers to use GPIO descriptors"
* tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: corgi: Convert to use GPIO descriptors
backlight: pwm_bl: Switch to full GPIO descriptor
The code in the Corgi backlight driver can be considerably
simplified by moving to GPIO descriptors and lookup tables
from the board files instead of passing GPIO numbers using
the old API.
Make sure to encode inversion semantics for the Akita and
Spitz platforms inside the GPIO lookup table and drop the
custom inversion semantics from the driver.
All in-tree users are converted in this patch.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The PWM backlight still supports passing a enable GPIO line as
platform data using the legacy <linux/gpio.h> API.
It turns out that ever board using this mechanism except one
is pass .enable_gpio = -1. So we drop all these cargo-culted -1's
from all instances of this platform data in the kernel.
The remaning board, Palm TC, is converted to pass a machine
descriptior table with the "enable" GPIO instead, and delete the
platform data entry for enable_gpio and the code handling it
and things should work smoothly with the new API.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge v5.6-rc5 into drm-next
Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkEjOgAKCRDj7w1vZxhR
xeaDAQD+1MludG4RmfQhATe4jTsPC1r2x63OF2CA0ChMGHXJyQEA8qqQ+8y1Cd/u
PZ3PpcTl4qYYHgzJ6FwW7kDPTvlaZQE=
=IJAt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.7:
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan
This patch adds a led-backlight driver (led_bl), which is similar to
pwm_bl except the driver uses a LED class driver to adjust the
brightness in the HW. Multiple LEDs can be used for a single backlight.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fixes coccicheck warning:
./drivers/video/backlight/qcom-wled.c:1104:5-15:
WARNING: Unsigned expression compared with zero: string_len > 0
The unsigned variable string_len is assigned a return value from the call
to of_property_count_elems_of_size(), which may return negative error code.
Fixes: 775d2ffb4a ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133838.13132-1-krzk@kernel.org
The Rohm BD6107 driver can pass a fixed GPIO line using the old
GPIO API using platform data. As there are no in-tree users of this
platform data since 2013, we can convert this to use a GPIO descriptor
and require any out-of-tree consumers to pass the GPIO using
a machine descriptor table instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The driver includes <linux/gpio.h> yet fails to use symbols
from any the header so drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There is a spelling mistake in a dev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The probe function in the gpio-backlight driver is quite short. If we
pull gpio_backlight_initial_power_state() into probe we can drop two
more fields from struct gpio_backlight and shrink the driver code.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Instead of dereferencing pdev each time, use a helper variable for
the associated device pointer.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Now that the last user of platform data (sh ecovec24) defines a proper
GPIO lookup and sets the 'default-on' device property, we can drop the
platform_data-specific GPIO handling and unify a big chunk of code.
The only field used from the platform data is now the fbdev pointer.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The GPIO backlight driver currently requests the line 'as is', without
acively setting its direction. This can lead to problems: if the line
is in input mode by default, we won't be able to drive it later when
updating the status and also reading its initial value doesn't make
sense for backlight setting.
Request the line 'as is' initially, so that we can read its value
without affecting it but then change the direction to output explicitly
when setting the initial brightness.
Also: check the current direction and only read the value if it's output.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Remove a double newline from the driver.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
We no longer use any symbols from of_gpio.h. Remove this include.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The driver should not require a machine specific header. Change
it to pass the GPIO line through a lookup table, and move the
timing generator definitions into the drivers itself.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The auto string detection algorithm checks if the current WLED
sink configuration is valid. It tries enabling every sink and
checks if the OVP fault is observed. Based on this information
it detects and enables the valid sink configuration.
Auto calibration will be triggered when the OVP fault interrupts
are seen frequently thereby it tries to fix the sink configuration.
The auto-detection also kicks in when the connected LED string
of the display-backlight malfunctions (because of damage) and
requires the damaged string to be turned off to prevent the
complete panel and/or board from being damaged.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Handle the short circuit interrupt and check if the short circuit
interrupt is valid. Re-enable the module to check if it goes
away. Disable the module altogether if the short circuit event
persists.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
WLED4 peripheral is present on some PMICs like pmi8998 and
pm660l. It has a different register map and configurations
are also different. Add support for it.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Restructure the driver to add the support for new WLED
peripherals.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Rename the PM8941* references as WLED3 to make the driver
generic and have WLED support for other PMICs. Also rename
"i_boost_limit" and "i_limit" variables to "boost_i_limit"
and "string_i_limit" respectively to resemble the corresponding
register names.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
pm8941-wled.c driver is supporting the WLED peripheral
on pm8941. Rename it to qcom-wled.c so that it can support
WLED on multiple PMICs.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the Kconfig dependency to CONFIG_PREEMPTION.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[Sebastian: +LCD_HP700]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Using a power-of-2 instead of power-of-10 base makes the computations
much cheaper. 2^16 is safe; retval never becomes more than 2^48 +
2^32/2. On a 32 bit platform, the very expensive 64/32 division at the
end of cie1931() instead becomes essentially free (a shift by 32 is
just a register rename).
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
For a fixed small exponent of 3, it is more efficient to simply use
two explicit multiplications rather than calling the int_pow() library
function: Aside from the function call overhead, its implementation
using repeated squaring means it ends up doing four 64x64
multiplications.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
lightness*1000 is nowhere near overflowing 32 bits, so we can just use
an ordinary 32/32 division, which is much cheaper than the 64/32 done
via do_div().
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The "break-even" point for the two formulas is L==8, which is also
what the code actually implements. [Incidentally, at that point one
has Y=0.008856, not 0.08856].
Moreover, all the sources I can find say the linear factor is 903.3
rather than 902.3, which makes sense since then the formulas agree at
L==8, both yielding the 0.008856 figure to four significant digits.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add curly braces to an 'else' branch in pwm_backlight_update_status()
to match the corresponding 'if' branch.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
pwm_backlight_probe() re-assigns pb->levels for every brightness
level. This is not needed and was likely not intended, since
neither side of the assignment changes during the loop. Assign
the field only once.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
For now just enable it in the probe function to allow I2C
access. Disabling also means resetting the register values
to default and according to the datasheet does not give
power savings.
Tested on Kobo Clara HD.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Static structure micro_bl_props, having type backlight_properties, is
used only once, when it is passed as the last argument to function
devm_backlight_device_register(). devm_backlight_device_register() is
defined with its last parameter being declared constant. Hence make
micro_bl_props itself constant as well.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Devicetree aliases are missing, so that module autoloading
does not work properly.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
- Obtain scale type through sysfs
- New Functionality
- Provide Device Tree functionality; rave-sp-backlight
- Calculate if scale type is (non-)linear; pwm_bl
- Fix-ups
- Simplify code; lm3630a_bl
- Trivial rename/whitespace/typo fixes; lms283gf05
- Remove superfluous NULL check; tosa_lcd
- Fix power state initialisation; gpio_backlight
- List supported file; MAINTAINERS
- Bug Fixes
- Kconfig - default to not building unless requested; {LED,BACKLIGHT}_CLASS_DEVICE
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl2JTwMACgkQUa+KL4f8
d2EC7g/+Pliuvx8dgW+MPX8K6cnap+m7xV8Z9OyyEYHroz+MX7TsBGmJeChoOz9K
RoFCap5VCtEEyiobDbe8HKpxivY88CdweegYxxBx+Uo9qJRogDv93kqVz3BmHxBm
v2ShTY+8r2nf6YNN30FXZJSM4WkFqAg2MvM6LXP3R4rPSQ/u2Xp6L5VnzVETl23b
/ZsP71axvwDNpi437ekUSoraUl9GZnHaINc7/0R/SnRPvZ2aakko7IRNYU0z+NQ+
unImiBpFjuC1UXDaebd2Bt9ayrM47QkBGLu6LgOTUSg9tFlosvF6Z3TDLo3L2ptD
Td5SWuTXALFaOv1xmMaylcsA/36D/KRhwnmQMVn/Ld5c/M+l4vOm4YDNgS1G8JY4
i7KzoD7Z2yhyI3OHYoBGXI8+fmj2qQs+VGThtdhb96LlaHVUibfSlA0i5OjeMKO+
ddiTy9ksiH+pBcn0YPvHJRNOI0uVmqBMSPkJ1Bdwz6HS58QcL3LvBzHtMVNoGkCK
iWPPn90hveZmbXAxFIb8a2KRjFz531sReSZh+9dIZ/zOOF5OdyOotMk1zacWCUrt
Jre1paR4W1VPXf4cE3IcpE6dJeA9DN9niz+9bsMgbr6cYG6xhB7xELrTUCXZn5CR
C9tNMWuiqUlv0NZHb7CsifQW1bwzw8hTPhDk9VpBb0cFCucLYV0=
=DSnC
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Core Frameworks
- Obtain scale type through sysfs
New Functionality:
- Provide Device Tree functionality in rave-sp-backlight
- Calculate if scale type is (non-)linear in pwm_bl
Fix-ups:
- Simplify code in lm3630a_bl
- Trivial rename/whitespace/typo fixes in lms283gf05
- Remove superfluous NULL check in tosa_lcd
- Fix power state initialisation in gpio_backlight
- List supported file in MAINTAINERS
Bug Fixes:
- Kconfig - default to not building unless requested in
{LED,BACKLIGHT}_CLASS_DEVICE"
* tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Set scale type for brightness curves specified in the DT
backlight: pwm_bl: Set scale type for CIE 1931 curves
backlight: Expose brightness curve type through sysfs
MAINTAINERS: Add entry for stable backlight sysfs ABI documentation
backlight: gpio-backlight: Correct initial power state handling
video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe
video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}
backlight: lms283gf05: Fix a typo in the description passed to 'devm_gpio_request_one()'
backlight: lm3630a: Switch to use fwnode_property_count_uXX()
backlight: rave-sp: Leave initial state and register with correct device
Check if a brightness curve specified in the device tree is linear or
not and set the corresponding property accordingly. This makes the
scale type available to userspace via the 'scale' sysfs attribute.
To determine if a curve is linear it is compared to a interpolated linear
curve between min and max brightness. The curve is considered linear if
no value deviates more than +/-5% of ${brightness_range} from their
interpolated value.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
For backlight curves calculated with the CIE 1931 algorithm set
the brightness scale type to non-linear. This makes the scale type
available to userspace via the 'scale' sysfs attribute.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Backlight brightness curves can have different shapes. The two main
types are linear and non-linear curves. The human eye doesn't
perceive linearly increasing/decreasing brightness as linear (see
also 88ba95bedb "backlight: pwm_bl: Compute brightness of LED
linearly to human eye"), hence many backlights use non-linear (often
logarithmic) brightness curves. The type of curve currently is opaque
to userspace, so userspace often uses more or less reliable heuristics
(like the number of brightness levels) to decide whether to treat a
backlight device as linear or non-linear.
Export the type of the brightness curve via the new sysfs attribute
'scale'. The value of the attribute can be 'linear', 'non-linear' or
'unknown'. For devices that don't provide information about the scale
of their brightness curve the value of the 'scale' attribute is 'unknown'.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The default-on property - or the def_value via legacy pdata) should be
handled as:
if it is 1, the backlight must be enabled (kept enabled)
if it is 0, the backlight must be disabled (kept disabled)
This only works for the case when default-on is set. If it is not set then
the brightness of the backlight is set to 0. Now if the backlight is
enabled by external driver (graphics) the backlight will stay disabled since
the brightness is configured as 0. The backlight will not turn on.
In order to minimize screen flickering during device boot:
The initial brightness should be set to 1.
If booted in non DT mode or no phandle link to the backlight node:
follow the def_value/default-on to select UNBLANK or POWERDOWN
If in DT boot we have phandle link then leave the GPIO in a state which the
bootloader left it and let the user of the backlight to configure it
further.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
No need to check the argument of i2c_unregister_device() because the
function itself does it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When running "make oldconfig" on a .config where
CONFIG_BACKLIGHT_LCD_SUPPORT is not set, two new config options
("Lowlevel LCD controls" and "Lowlevel Backlight controls") appear, both
defaulting to "m".
Drop the "default m", as options should default to disabled, and because
several driver config options already select LCD_CLASS_DEVICE or
BACKLIGHT_CLASS_DEVICE when needed.
Fixes: 8c5dc8d9f1 ("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The description passed to 'devm_gpio_request_one()' should be related to
LMS283GF05, not LMS285GF05.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use use fwnode_property_count_uXX() directly, that makes code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This way the backlight can be referenced through its device node and
enabling/disabling can be managed through the panel driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There was no users left - so drop the code to support EARLY_EVENT_BLANK.
This patch removes the support in backlight,
and drop the notifier in fbmem.
That EARLY_EVENT_BLANK is not used can be verified that no driver set any of:
lcd_ops.early_set_power()
lcd_ops.r_early_set_power()
Noticed while browsing backlight code for other reasons.
v2:
- Fix changelog to say "EARLY_EVENT_BLANK" (Daniel)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725143224.GB31803@ravnborg.org
- Provide support for ACPI enumeration; gpio_backlight
- Fix-ups
- SPDX fixups; pwm_bl
- Fix linear brightness levels to include number available; pwm_bl
-----BEGIN PGP SIGNATURE-----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=RKbo
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Provide support for ACPI enumeration; gpio_backlight
Fix-ups:
- SPDX fixups; pwm_bl
- Fix linear brightness levels to include number available; pwm_bl"
* tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Fix heuristic to determine number of brightness levels
backlight: gpio_backlight: Enable ACPI enumeration
backlight: pwm_bl: Convert to use SPDX identifier
- remove fbdev notifier usage for fbcon (as prep work to clean up the fbcon
locking), add locking checks in vt/console code and make assorted cleanups
in fbdev and backlight code (Daniel Vetter)
- add COMPILE_TEST support to atmel_lcdfb, da8xx-fb, gbefb, imxfb, pvr2fb and
pxa168fb drivers (me)
- fix DMA API abuse in au1200fb and jz4740_fb drivers (Christoph Hellwig)
- add check for new BGRT status field rotation bits in efifb driver (Hans de
Goede)
- mark expected switch fall-throughs in s3c-fb driver (Gustavo A. R. Silva)
- remove fbdev mxsfb driver in favour of the drm version (Fabio Estevam)
- remove broken rfbi code from omap2fb driver (me)
- misc fixes (Arnd Bergmann, Shobhit Kukreti, Wei Yongjun, me)
- misc cleanups (Gustavo A. R. Silva, Colin Ian King, me)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=W1AD
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v5.3' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
- remove fbdev notifier usage for fbcon (as prep work to clean up the
fbcon locking), add locking checks in vt/console code and make
assorted cleanups in fbdev and backlight code (Daniel Vetter)
- add COMPILE_TEST support to atmel_lcdfb, da8xx-fb, gbefb, imxfb,
pvr2fb and pxa168fb drivers (me)
- fix DMA API abuse in au1200fb and jz4740_fb drivers (Christoph
Hellwig)
- add check for new BGRT status field rotation bits in efifb driver
(Hans de Goede)
- mark expected switch fall-throughs in s3c-fb driver (Gustavo A. R.
Silva)
- remove fbdev mxsfb driver in favour of the drm version (Fabio
Estevam)
- remove broken rfbi code from omap2fb driver (me)
- misc fixes (Arnd Bergmann, Shobhit Kukreti, Wei Yongjun, me)
- misc cleanups (Gustavo A. R. Silva, Colin Ian King, me)
* tag 'fbdev-v5.3' of git://github.com/bzolnier/linux: (62 commits)
video: fbdev: imxfb: fix a typo in imxfb_probe()
video: fbdev: s3c-fb: Mark expected switch fall-throughs
video: fbdev: s3c-fb: fix sparse warnings about using incorrect types
video: fbdev: don't print error message on framebuffer_alloc() failure
video: fbdev: intelfb: return -ENOMEM on framebuffer_alloc() failure
video: fbdev: s3c-fb: return -ENOMEM on framebuffer_alloc() failure
vga_switcheroo: Depend upon fbcon being built-in, if enabled
video: fbdev: omap2: remove rfbi
video: fbdev: atmel_lcdfb: remove redundant initialization to variable ret
video: fbdev-MMP: Use struct_size() in devm_kzalloc()
video: fbdev: controlfb: fix warnings about comparing pointer to 0
efifb: BGRT: Add check for new BGRT status field rotation bits
jz4740_fb: fix DMA API abuse
video: fbdev: pvr2fb: fix link error for pvr2fb_pci_exit
video: fbdev: s3c-fb: add COMPILE_TEST support
video: fbdev: imxfb: fix sparse warnings about using incorrect types
video: fbdev: pvr2fb: fix build warning when compiling as module
fbcon: Export fbcon_update_vcs
backlight: simplify lcd notifier
staging/olpc_dcon: Add drm conversion to TODO
...
With commit 88ba95bedb ("backlight: pwm_bl: Compute brightness of
LED linearly to human eye") the number of set bits (aka hweight())
in the PWM period is used in the heuristic to determine the number
of brightness levels, when the brightness table isn't specified in
the DT. The number of set bits doesn't provide a reliable clue about
the length of the period, instead change the heuristic to:
nlevels = period / fls(period)
Also limit the maximum number of brightness levels to 4096 to avoid
excessively large tables.
With this the number of levels increases monotonically with the PWM
period, until the maximum of 4096 levels is reached:
period (ns) # levels
100 16
500 62
1000 111
5000 416
10000 769
50000 3333
100000 4096
Fixes: 88ba95bedb ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
ACPI allows to enumerate specific devices by using compatible strings.
Enable that enumeration for GPIO based backlight devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reduce size of duplicated comments by switching to use SPDX identifier.
No functional change.
While here, correct MODULE_LICENSE() string to be aligned with license text.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With all the work I've done on replacing fb notifier calls with direct
calls into fbcon the backlight/lcd notifier is the only user left.
It will only receive events now that it cares about, hence we can
remove this check.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-34-daniel.vetter@ffwll.ch
Create a new wrapper function for this, feels like there's some
refactoring room here between the two modes.
v2: backlight notifier is also interested in the mode change event,
it calls lcd->set_mode, of which there are 3 implementations. Thanks
to Maarten for spotting this. So we keep that. We can ditch the differentiation
between mode change and all mode changes (because backlight notifier
doesn't care), and we can drop the FBINFO_MISC_USEREVENT stuff too,
because that's just to prevent recursion between fbmem.c and fbcon.c.
While at it flatten the control flow a bit.
v3: Need to add a static inline to the dummy function.
v4: Add missing #include <fbcon.h> to sh_mob (Sam).
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-29-daniel.vetter@ffwll.ch
This reverts commit 994efacdf9.
The justification is that if hw blanking fails (i.e. fbops->fb_blank)
fails, then we still want to shut down the backlight. Which is exactly
_not_ what fb_blank() does and so rather inconsistent if we end up
with different behaviour between fbcon and direct fbdev usage. Given
that the entire notifier maze is getting in the way anyway I figured
it's simplest to revert this not well justified commit.
v2: Add static inline to the dummy version.
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-25-daniel.vetter@ffwll.ch
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 246 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
publishhed by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 48 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.292339952@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
gpl v2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 19 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141333.108140152@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
