Trace the requested CPUID function instead of the effective function,
e.g. if the requested function is out-of-range and KVM is emulating an
Intel CPU, as the intent of the tracepoint is to show if the output came
from the actual leaf as opposed to the max basic leaf via redirection.
Similarly, leave "found" as is, i.e. report that an entry was found if
and only if the requested entry was found.
Fixes: 43561123ab ("kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[Sean: Drop "found" semantic change, reword changelong accordingly ]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current CPUID 0xd enumeration code does not support supervisor
states, because KVM only supports setting IA32_XSS to zero.
Change it instead to use a new variable supported_xss, to be
set from the hardware_setup callback which is in charge of CPU
capabilities.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle CPUID 0x8000000A in the main switch in __do_cpuid_func() and drop
->set_supported_cpuid() now that both VMX and SVM implementations are
empty. Like leaf 0x14 (Intel PT) and leaf 0x8000001F (SEV), leaf
0x8000000A is is (obviously) vendor specific but can be queried in
common code while respecting SVM's wishes by querying kvm_cpu_cap_has().
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set NRIPS in KVM capabilities if and only if nrips=true, which naturally
incorporates the boot_cpu_has() check, and set nrips_enabled only if the
KVM capability is enabled.
Note, previously KVM would set nrips_enabled based purely on userspace
input, but at worst that would cause KVM to propagate garbage into L1,
i.e. userspace would simply be hosing its VM.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set SVM feature bits in KVM capabilities if and only if nested=true, KVM
shouldn't advertise features that realistically can't be used. Use
kvm_cpu_cap_has(X86_FEATURE_SVM) to indirectly query "nested" in
svm_set_supported_cpuid() in anticipation of moving CPUID 0x8000000A
adjustments into common x86 code.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move host_efer to common x86 code and use it for CPUID's is_efer_nx() to
avoid constantly re-reading the MSR.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop largepages_enabled, kvm_largepages_enabled() and
kvm_disable_largepages() now that all users are gone.
Note, largepages_enabled was an x86-only flag that got left in common
KVM code when KVM gained support for multiple architectures.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop propagating MMU large page support into a memslot's disallow_lpage
now that the MMU's max_page_level handles the scenario where VMX's EPT is
enabled and EPT doesn't support 2M pages.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure the max page level during hardware setup to avoid a retpoline
in the page fault handler. Drop ->get_lpage_level() as the page fault
handler was the last user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Combine kvm_enable_tdp() and kvm_disable_tdp() into a single function,
kvm_configure_mmu(), in preparation for doing additional configuration
during hardware setup. And because having separate helpers is silly.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tweak SVM's logging of NPT enabled/disabled to handle the logging in a
single pr_info() in preparation for merging kvm_enable_tdp() and
kvm_disable_tdp() into a single function.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vmx_pt_mode_is_host_guest() in intel_pmu_refresh() instead of
bouncing through kvm_x86_ops->pt_supported, and remove ->pt_supported()
as the PMU code was the last remaining user.
Opportunistically clean up the wording of a comment that referenced
kvm_x86_ops->pt_supported().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_cpu_cap_has() to check for Intel PT when processing the list of
virtualized MSRs to pave the way toward removing ->pt_supported().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use cpu_has_vmx_rdtscp() directly when computing secondary exec controls
and drop the now defunct vmx_rdtscp_supported().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for MSR_TSC_AUX virtualization via kvm_cpu_cap_has() and drop
->rdtscp_supported().
Note, vmx_rdtscp_supported() needs to hang around a tiny bit longer due
other usage in VMX code.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Perform the capacity checks on the userspace provided kvm_cpuid_array
in the lower __do_cpuid_func() and __do_cpuid_func_emulated().
Pre-checking the array in do_cpuid_func() no longer adds value now that
__do_cpuid_func() has been trimmed down to size, i.e. doesn't invoke a
big pile of retpolined functions before doing anything useful.
Note, __do_cpuid_func() already checks the array capacity via
do_host_cpuid(), "moving" the check to __do_cpuid_func() simply means
removing a WARN_ON().
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for Intel PT using kvm_cpu_cap_has() to pave the way toward
eliminating ->pt_supported().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set emulated and transmuted (set based on other features) feature bits
via kvm_cpu_caps now that the CPUID output for KVM_GET_SUPPORTED_CPUID
is direcly overidden with kvm_cpu_caps.
Note, VMX emulation of UMIP already sets kvm_cpu_caps.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Override CPUID entries with kvm_cpu_caps during KVM_GET_SUPPORTED_CPUID
instead of masking the host CPUID result, which is redundant now that
the host CPUID is incorporated into kvm_cpu_caps at runtime.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mask kvm_cpu_caps based on host CPUID in preparation for overriding the
CPUID results during KVM_GET_SUPPORTED_CPUID instead of doing the
masking at runtime.
Note, masking may or may not be necessary, e.g. the kernel rarely, if
ever, sets real CPUID bits that are not supported by hardware. But, the
code is cheap and only runs once at load, so an abundance of caution is
warranted.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the code for handling stateful CPUID 0x2 and mark the associated
flags as deprecated. WARN if host CPUID 0x2.0.AL > 1, i.e. if by some
miracle a host with stateful CPUID 0x2 is encountered.
No known CPU exists that supports hardware accelerated virtualization
_and_ a stateful CPUID 0x2. Barring an extremely contrived nested
virtualization scenario, stateful CPUID support is dead code.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework CPUID 0x2.0 to be a normal CPUID leaf if it returns "01" in AL,
i.e. EAX & 0xff, as a step towards removing KVM's stateful CPUID code
altogether.
Long ago, Intel documented CPUID 0x2.0 as being a stateful leaf, e.g. a
version of the SDM circa 1995 states:
The least-significant byte in register EAX (register AL) indicates the
number of times the CPUID instruction must be executed with an input
value of 2 to get a complete description of the processors's caches
and TLBs. The Pentium Pro family of processors will return a 1.
A 2000 version of the SDM only updated the paragraph to reference
Intel's new processory family:
The first member of the family of Pentium 4 processors will return a 1.
Fast forward to the present, and Intel's SDM now states:
The least-significant byte in register EAX (register AL) will always
return 01H. Software should ignore this value and not interpret it as
an information descriptor.
AMD's APM simply states that CPUID 0x2 is reserved.
Given that CPUID itself was introduced in the Pentium, odds are good
that the only Intel CPU family that *maybe* implemented a stateful CPUID
was the P5. Which obviously did not support VMX, or KVM.
In other words, KVM's emulation of a stateful CPUID 0x2.0 has likely
been dead code from the day it was introduced. This is backed up by
commit 0fdf8e59fa ("KVM: Fix cpuid iteration on multiple leaves per
eac"), which shows that the stateful iteration code was completely
broken when it was introduced by commit 0771671749 ("KVM: Enhance
guest cpuid management"), i.e. not actually tested.
Annotate all stateful code paths as "unlikely", but defer its removal to
a future patch to simplify reinstating the code if by some miracle there
is someone running KVM on a CPU with a stateful CPUID 0x2.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly handle CPUID 0x7 sub-leaf 1. The kernel is currently aware
of exactly one feature in CPUID 0x7.1, which means there is room for
another 127 features before CPUID 0x7.2 will see the light of day, i.e.
the looping is likely to be dead code for years to come.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the CPUID 0x7 masking back into __do_cpuid_func() now that the
size of the code has been trimmed down significantly.
Tweak the WARN case, which is impossible to hit unless the CPU is
completely broken, to break the loop before creating the bogus entry.
Opportunustically reorder the cpuid_entry_set() calls and shorten the
comment about emulation to further reduce the footprint of CPUID 0x7.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set UMIP in kvm_cpu_caps when it is emulated by VMX, even though the
bit will effectively be dropped by do_host_cpuid(). This allows
checking for UMIP emulation via kvm_cpu_caps instead of a dedicated
kvm_x86_ops callback.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add accessor(s) for KVM cpu caps and use said accessor to detect
hardware support for LA57 instead of manually querying CPUID.
Note, the explicit conversion to bool via '!!' in kvm_cpu_cap_has() is
technically unnecessary, but it gives people a warm fuzzy feeling.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper, kvm_cpu_cap_check_and_set(), to query boot_cpu_has() as
part of setting a KVM cpu capability. VMX in particular has a number of
features that are dependent on both a VMCS capability and kernel
support.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the clearing of the XSAVES CPUID bit into VMX, which has a separate
VMCS control to enable XSAVES in non-root, to eliminate the last ugly
renmant of the undesirable "unsigned f_* = *_supported ? F(*) : 0"
pattern in the common CPUID handling code.
Drop ->xsaves_supported(), CPUID adjustment was the only user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced KVM CPU caps to propagate VMX-only (kernel)
settings to supported CPUID flags.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced KVM CPU caps to propagate SVM-only (kernel)
settings to supported CPUID flags.
Note, there are a few subtleties:
- Setting a flag based on a *different* feature is effectively
emulation, and must be done at runtime via ->set_supported_cpuid().
- CPUID 0x8000000A.EDX is a feature leaf that was previously not
adjusted by kvm_cpu_cap_mask() because all features are hidden by
default.
Opportunistically add a technically unnecessary break and fix an
indentation issue in svm_set_supported_cpuid().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the CPUID masks for KVM_GET_SUPPORTED_CPUID at load time using
what is effectively a KVM-adjusted copy of boot_cpu_data, or more
precisely, the x86_capability array in boot_cpu_data.
In terms of KVM support, the vast majority of CPUID feature bits are
constant, and *all* feature support is known at KVM load time. Rather
than apply boot_cpu_data, which is effectively read-only after init,
at runtime, copy it into a KVM-specific array and use *that* to mask
CPUID registers.
In additional to consolidating the masking, kvm_cpu_caps can be adjusted
by SVM/VMX at load time and thus eliminate all feature bit manipulation
in ->set_supported_cpuid().
Opportunistically clean up a few warts:
- Replace bare "unsigned" with "unsigned int" when a feature flag is
captured in a local variable, e.g. f_nx.
- Sort the CPUID masks by function, index and register (alphabetically
for registers, i.e. EBX comes before ECX/EDX).
- Remove the superfluous /* cpuid 7.0.ecx */ comments.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Call kvm_set_cpu_caps from kvm_x86_ops->hardware_setup due to fixed
GBPAGES patch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invert the handling of XSAVES, i.e. set it based on boot_cpu_has() by
default, in preparation for adding KVM cpu caps, which will generate the
mask at load time before ->xsaves_supported() is ready.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The clearing of the GBPAGE CPUID bit for VMX is wrong; support for 1GB
pages in EPT has no relationship to whether 1GB pages should be marked as
supported in CPUID. This has no ill effect because we're only clearing
the bit, but we're not marking 1GB pages as available when EPT is disabled
(even though they are actually supported thanks to shadowing). Instead,
forcibly enable 1GB pages in the shadow paging case.
This also eliminates an instance of the undesirable "unsigned f_* =
*_supported ? F(*) : 0" pattern in the common CPUID handling code,
and paves the way toward eliminating ->get_lpage_level().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the Processor Trace CPUID adjustment into VMX code to eliminate
an instance of the undesirable "unsigned f_* = *_supported ? F(*) : 0"
pattern in the common CPUID handling code, and to pave the way toward
eventually removing ->pt_supported().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the clearing of the RDTSCP CPUID bit into VMX, which has a separate
VMCS control to enable RDTSCP in non-root, to eliminate an instance of
the undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in the
common CPUID handling code. Drop ->rdtscp_supported() since CPUID
adjustment was the last remaining user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the setting of the PKU CPUID bit into VMX to eliminate an instance
of the undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in
the common CPUID handling code. Drop ->pku_supported(), CPUID
adjustment was the only user.
Note, some AMD CPUs now support PKU, but SVM doesn't yet support
exposing it to a guest.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the CPUID adjustment for UMIP emulation into VMX code to eliminate
an instance of the undesirable "unsigned f_* = *_supported ? F(*) : 0"
pattern in the common CPUID handling code.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the INVPCID CPUID adjustments into VMX to eliminate an instance of
the undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in the
common CPUID handling code. Drop ->invpcid_supported(), CPUID
adjustment was the only user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the MPX CPUID adjustments into VMX to eliminate an instance of the
undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in the
common CPUID handling code.
Note, to maintain existing behavior, VMX must manually check for kernel
support for MPX by querying boot_cpu_has(X86_FEATURE_MPX). Previously,
do_cpuid_7_mask() masked MPX based on boot_cpu_data by invoking
cpuid_mask() on the associated cpufeatures word, but cpuid_mask() runs
prior to executing vmx_set_supported_cpuid().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced cpuid_entry_get_reg() to automatically get
the appropriate register when masking a CPUID entry.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce mutators to modify feature bits in CPUID entries and use the
new mutators where applicable. Using the mutators eliminates the need
to manually specify the register to modify query at no extra cost and
will allow adding runtime consistency checks on the function/index in a
future patch.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce accessors to retrieve feature bits from CPUID entries and use
the new accessors where applicable. Using the accessors eliminates the
need to manually specify the register to be queried at no extra cost
(binary output is identical) and will allow adding runtime consistency
checks on the function and index in a future patch.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace "unsigned" with "unsigned int" to make checkpatch and people
everywhere a little bit happier, and to avoid propagating the filth when
future patches add more cpuid helpers that work with unsigned (ints).
No functional change intended.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the intermediate CPUID output register values from "int" to "u32"
to match both hardware and the storage type in struct cpuid_reg.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the explicit @func param from ->set_supported_cpuid() and instead
pull the CPUID function from the relevant entry. This sets the stage
for hardening guest CPUID updates in future patches, e.g. allows adding
run-time assertions that the CPUID feature being changed is actually
a bit in the referenced CPUID entry.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clear the output regs for the main CPUID 0x14 leaf (index=0) if Intel PT
isn't exposed to the guest. Leaf 0x14 enumerates Intel PT capabilities
and should return zeroes if PT is not supported. Incorrectly reporting
PT capabilities is essentially a cosmetic error, i.e. doesn't negatively
affect any known userspace/kernel, as the existence of PT itself is
correctly enumerated via CPUID 0x7.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose kvm_mpx_supported() as a static inline so that it can be inlined
in kvm_intel.ko.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Query supported_xcr0 when checking for MPX support instead of invoking
->mpx_supported() and drop ->mpx_supported() as kvm_mpx_supported() was
its last user. Rename vmx_mpx_supported() to cpu_has_vmx_mpx() to
better align with VMX/VMCS nomenclature.
Modify VMX's adjustment of xcr0 to call cpus_has_vmx_mpx() (renamed from
vmx_mpx_supported()) directly to avoid reading supported_xcr0 before
it's fully configured.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Test that *all* bits are set. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new global variable, supported_xcr0, to track which xcr0 bits can
be exposed to the guest instead of calculating the mask on every call.
The supported bits are constant for a given instance of KVM.
This paves the way toward eliminating the ->mpx_supported() call in
kvm_mpx_supported(), e.g. eliminates multiple retpolines in VMX's nested
VM-Enter path, and eventually toward eliminating ->mpx_supported()
altogether.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to query which of the (two) supported PT modes is active.
The primary motivation is to help document that there is a third PT mode
(host-only) that's currently not supported by KVM. As is, it's not
obvious that PT_MODE_SYSTEM != !PT_MODE_HOST_GUEST and vice versa, e.g.
that "pt_mode == PT_MODE_SYSTEM" and "pt_mode != PT_MODE_HOST_GUEST" are
two distinct checks.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
