Use sparsemem as the only memory model for UP, SMP and NUMA. Measurements
indicate that DISCONTIGMEM has a higher overhead than sparsemem. And
FLATMEMs benefits are minimal. So I think its best to simply standardize
on sparsemem.
Results of page allocator tests (test can be had via git from slab git
tree branch tests)
Measurements in cycle counts. 1000 allocations were performed and then the
average cycle count was calculated.
Order FlatMem Discontig SparseMem
0 639 665 641
1 567 647 593
2 679 774 692
3 763 967 781
4 961 1501 962
5 1356 2344 1392
6 2224 3982 2336
7 4869 7225 5074
8 12500 14048 12732
9 27926 28223 28165
10 58578 58714 58682
(Note that FlatMem is an SMP config and the rest NUMA configurations)
Memory use:
SMP Sparsemem
-------------
Kernel size:
text data bss dec hex filename
3849268 397739 1264856 5511863 541ab7 vmlinux
total used free shared buffers cached
Mem: 8242252 41164 8201088 0 352 11512
-/+ buffers/cache: 29300 8212952
Swap: 9775512 0 9775512
SMP Flatmem
-----------
Kernel size:
text data bss dec hex filename
3844612 397739 1264536 5506887 540747 vmlinux
So 4.5k growth in text size vs. FLATMEM.
total used free shared buffers cached
Mem: 8244052 40544 8203508 0 352 11484
-/+ buffers/cache: 28708 8215344
2k growth in overall memory use after boot.
NUMA discontig:
text data bss dec hex filename
3888124 470659 1276504 5635287 55fcd7 vmlinux
total used free shared buffers cached
Mem: 8256256 56908 8199348 0 352 11496
-/+ buffers/cache: 45060 8211196
Swap: 9775512 0 9775512
NUMA sparse:
text data bss dec hex filename
3896428 470659 1276824 5643911 561e87 vmlinux
8k text growth. Given that we fully inline virt_to_page and friends now
that is rather good.
total used free shared buffers cached
Mem: 8264720 57240 8207480 0 352 11516
-/+ buffers/cache: 45372 8219348
Swap: 9775512 0 9775512
The total available memory is increased by 8k.
This patch makes sparsemem the default and removes discontig and
flatmem support from x86.
[ akpm@linux-foundation.org: allnoconfig build fix ]
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This makes x86_64's ia32 emulation support share the sources used in the
32-bit kernel for the 32-bit vDSO and much of its setup code.
The 32-bit vDSO mapping now behaves the same on x86_64 as on native 32-bit.
The abi.syscall32 sysctl on x86_64 now takes the same values that
vm.vdso_enabled takes on the 32-bit kernel. That is, 1 means a randomized
vDSO location, 2 means the fixed old address. The CONFIG_COMPAT_VDSO
option is now available to make this the default setting, the same meaning
it has for the 32-bit kernel. (This does not affect the 64-bit vDSO.)
The argument vdso32=[012] can be used on both 32-bit and 64-bit kernels to
set this paramter at boot time. The vdso=[012] argument still does this
same thing on the 32-bit kernel.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make the Kconfig.instrumentation file a bit easier on the eyes, and use
the new ARCH_SUPPORTS_OPROFILE for x86[-64].
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent Kconfig changes in x86 resulted in CONFIG_X86_HT no longer
being set if (X86_32 && MK8).
After grep'ing through the tree I think the problem is that different
places have different assumptions about the semantics of CONFIG_X86_HT,
either:
- hyperthreading or
- multicore
This should be sorted out properly, but until then we should keep the
2.6.23 status quo.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.
For a fix the diffstat is nice:
6 files changed, 3 insertions(+), 36 deletions(-)
The patch reverts these commits:
- 0f855aa64b ("kconfig: add helper to set
config symbol from environment variable")
- 2a113281f5 ("kconfig: use $K64BIT to
set 64BIT with all*config targets")
Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.
With this patch we have following behaviour:
# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch | 32bit | 64bit
=====================================================
./. | 32bit | 64bit
ARCH=x86 | 32bit | 32bit
ARCH=i386 | 32bit | 32bit
ARCH=x86_64 | 64bit | 64bit
The general rule are that ARCH= and native architecture takes
precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says. The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.
This behaviour is consistent with previous behaviour so no
suprises here.
make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".
With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
=> select 64-bit
Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
With this patch we have all the Kconfig file shared
between i386 and x86_64.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Most of the arch settings were equal so combine them
in the first part of Kconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
No functional changes.
A prepatory step towards full unification.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Move all CPU definitions to Kconfig.cpu
Always define X86_MINIMUM_CPU_FAMILY and do the
obvious code cleanup in boot/cpucheck.c
Comments from: Adrian Bunk <bunk@kernel.org> incorporated.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Brian Gerst <bgerst@didntduck.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
This step introduces the file arch/x86/Kconfig
which contains all the menu's from "Power Management"
and below.
The main part of the new Kconfig file is shared
and the remaining i386/x86_64 specific symbols
are covered by dependencies.
A x86_64 allmodconfig build did not show any differences.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
