Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2
The majority of these are USB gadget fixes, but they are all small.
Other than that, some USB host controller fixes, and USB serial driver
fixes for problems reported with them.
Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to
be almost impossible to get right for all of the different platforms
these days.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlGeP/gACgkQMUfUDdst+ykXygCfeIL5/HMREhUSHQgb6IiIDR81
QHAAn0zJfRAyWUz4AtbrRsLSVfk3Q9vm
=DQIq
-----END PGP SIGNATURE-----
Merge tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2
The majority of these are USB gadget fixes, but they are all small.
Other than that, some USB host controller fixes, and USB serial driver
fixes for problems reported with them.
Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems
to be almost impossible to get right for all of the different
platforms these days."
* tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
USB: cxacru: potential underflow in cxacru_cm_get_array()
USB: ftdi_sio: Add support for Newport CONEX motor drivers
USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
usb: ohci: fix goto wrong tag in err case
usb: isp1760-if: fix memleak when platform_get_resource fail
usb: ehci-s5p: fix memleak when fallback to pdata
USB: serial: clean up chars_in_buffer
USB: ti_usb_3410_5052: fix chars_in_buffer overhead
USB: io_ti: fix chars_in_buffer overhead
USB: ftdi_sio: fix chars_in_buffer overhead
USB: ftdi_sio: clean up get_modem_status
USB: serial: add generic wait_until_sent implementation
USB: serial: add wait_until_sent operation
USB: set device dma_mask without reference to global data
USB: Blacklisted Cinterion's PLxx WWAN Interface
usb: option: Add Telewell TW-LTE 4G
USB: EHCI: remove bogus #error
USB: reset resume quirk needed by a hub
USB: usb-stor: realtek_cr: Fix compile error
usb, chipidea: fix link error when USB_EHCI_HCD is a module
...
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The Kconfig symbol USB_OTG_UTILS was removed in the v3.10 merge window,
in commit fd89149875 ("usb: phy: remove CONFIG_USB_OTG_UTILS"). But that
symbol popped up again in a few places. Remove it there too.
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This adds a dwc_platform.ko module that can be loaded by using
compatible = "snps,dwc2" in a device tree.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We were testing qtd->urb pointer for null after we had already
dereferenced it
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few debug messages were missing newlines, add them
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We were testing hsotg pointer for null after we had already
dereferenced it
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before, it was a function that would set all members of a given struct
containing only int members to -1. Now, it is renamed to
dwc_set_all_params and it works only on the dwc2_core_params struct.
This makes sure that all of the slightly dubious casting and assumptions
happen inside the function instead of by the caller.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, it was "dwc_otg", but this does not correspond to the
directory name and might cause confusion with the old out-of-tree
dwc_otg driver of which many versions circulate.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before, this was initialized in pci.c, after the dwc2_hcd_init was
called and the interrupts were enabled. This opened up a small time
window where common interrupts could be triggered, but there was no
handler for them, causing them to keep triggering infinitely and locking
up the machine.
On my RT3052 board this bug could be easily reproduced by hardcoding
the console log level to 8, so that a bunch of debug output from the dwc2
driver was generated inside this time window. This caused the interrupt
lockup to occur almost every time.
By requesting the irq inside dwc2_core_init and by disabling interrupts
before calling dwc2_core_init instead of after, we can be sure the
handler is registered before the interrupts are enabled, which should
close this window.
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems this flag is intended to pass to irq_set_status_flags, not
request_irq, and is not available on all architectures. Its value
corresponds to IRQF_PROBE_SHARED, which shouldn't be needed for this
driver, so removing this flag should be safe.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a config option USB_DWC2_DEBUG_PERIODIC that allows debugging
output be suppressed for periodic transfers. This helps when debugging
non-periodic transfers while there are also periodic transfers going on
(both to make the debug output less polluted and to prevent all CPU time
going to debug messages).
In addition, a debug message from dwc2_hcd_is_status_changed is removed
entirely, since it often floods the log regardless of periodic
transfers.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Cc: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We were setting the DMA masks in dwc2_driver_probe(), but that is
before the driver parameters have been set to their default values.
That meant the DMA masks could be set wrong. Fix it by moving the
DMA mask setting into dwc2_hcd_init(), after the driver parameters
have been set.
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unneeded struct device *dev argument from dwc2_hcd_init()
and dwc2_hcd_remove(), and pass in the value through the hsotg->dev
member instead
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, when an active urb was dequeued, its host channel would
not always be released. There is some special handling for this in
dwc2_hc_chhltd_intr_dma, but when it was the last urb/qtd in its qh, a
safeguard in dwc2_hc_n_intr would short-circuit and prevent the regular
interrupt handlers from running, without releasing the channel.
This is easily triggered when using a 3G modem using the option driver.
Opening and closing any ttyUSBx device will eat up a host channel that
is forever unusable from that point on.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
[paulz@synopsys.com: fixed comment style and added a couple of NULL checks]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc2_hcd_release() calls dwc2_hcd_free() which frees ->core_params
and sets it to NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix some compiler warnings when building for i386 arch. Reported by
Fengguang's build-bot.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the DWC2 Kconfig and Makefile, and modify the staging Kconfig and
Makefile to include them
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains the PCI bus interface "glue" for the DWC2 driver
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains code to support the HCD descriptor DMA mode of
the controller
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These files contain the HCD code, and implement the Linux
hc_driver API. Support for both slave mode and buffer DMA mode
of the controller is included.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The core code provides basic services for accessing and managing
the DWC_otg hardware. These services are used by both the Host
Controller Driver and (in future) the Peripheral Controller Driver.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
