b4bc93bd76d4da32600795cd323c971f00a2e788
13102 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
194dfe88d6 |
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
|
||
|
Linus Torvalds
|
95ab0e8768 |
Merge tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event updates from Ingo Molnar: - Fix address filtering for Intel/PT,ARM/CoreSight - Enable Intel/PEBS format 5 - Allow more fixed-function counters for x86 - Intel/PT: Enable not recording Taken-Not-Taken packets - Add a few branch-types * tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix the build on !CONFIG_PHYS_ADDR_T_64BIT perf: Add irq and exception return branch types perf/x86/intel/uncore: Make uncore_discovery clean for 64 bit addresses perf/x86/intel/pt: Add a capability and config bit for disabling TNTs perf/x86/intel/pt: Add a capability and config bit for event tracing perf/x86/intel: Increase max number of the fixed counters KVM: x86: use the KVM side max supported fixed counter perf/x86/intel: Enable PEBS format 5 perf/core: Allow kernel address filter when not filtering the kernel perf/x86/intel/pt: Fix address filter config for 32-bit kernel perf/core: Fix address filter parser for multiple filters x86: Share definition of __is_canonical_address() perf/x86/intel/pt: Relax address filter validation |
||
|
Linus Torvalds
|
2268735045 |
Merge tag 'x86_misc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov: - Add support for a couple new insn sets to the insn decoder: AVX512-FP16, AMX, other misc insns. - Update VMware-specific MAINTAINERS entries * tag 'x86_misc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Mark VMware mailing list entries as email aliases MAINTAINERS: Add Zack as maintainer of vmmouse driver MAINTAINERS: Update maintainers for paravirt ops and VMware hypervisor interface x86/insn: Add AVX512-FP16 instructions to the x86 instruction decoder perf/tests: Add AVX512-FP16 instructions to x86 instruction decoder test x86/insn: Add misc instructions to x86 instruction decoder perf/tests: Add misc instructions to the x86 instruction decoder test x86/insn: Add AMX instructions to the x86 instruction decoder perf/tests: Add AMX instructions to x86 instruction decoder test |
||
|
Linus Torvalds
|
356a1adca8 |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
|
||
Ian Rogers
|
7bd1da15d2 |
perf parse-events: Ignore case in topdown.slots check
An issue with icelakex metrics:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json?h=perf/core&id=65eab2bc7dab326ee892ec5a4c749470b368b51a#n48
That causes the slots not to be first.
Fixes:
|
||
|
Ian Rogers
|
8b464eac97 |
perf evlist: Avoid iteration for empty evlist.
As seen with 'perf stat --null ..' and reported in:
https://lore.kernel.org/lkml/YjCLcpcX2peeQVCH@kernel.org/
v2. Avoids setting evsel in the empty list case as suggested by Jiri Olsa.
Committer testing:
Before:
$ perf stat --null sleep 1
Segmentation fault (core dumped)
$
After:
$ perf stat --null sleep 1
Performance counter stats for 'sleep 1':
1.010340646 seconds time elapsed
0.001420000 seconds user
0.000000000 seconds sys
$
Fixes:
|
||
Michael Petlan
|
3cf6a32f3f |
perf symbols: Fix symbol size calculation condition
Before this patch, the symbol end address fixup to be called, needed two
conditions being met:
if (prev->end == prev->start && prev->end != curr->start)
Where
"prev->end == prev->start" means that prev is zero-long
(and thus needs a fixup)
and
"prev->end != curr->start" means that fixup hasn't been applied yet
However, this logic is incorrect in the following situation:
*curr = {rb_node = {__rb_parent_color = 278218928,
rb_right = 0x0, rb_left = 0x0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 40, type = 2 '\002',
binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}
*prev = {rb_node = {__rb_parent_color = 278219041,
rb_right = 0x109548b0, rb_left = 0x109547c0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 12, type = 2 '\002',
binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1095486e "optinsn_slot"}
In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.
After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.
Fixes:
|
||
Zhengjun Xing
|
91c9923a47 |
perf parse: Fix event parser error for hybrid systems
This bug happened on hybrid systems when both cpu_core and cpu_atom have the same event name such as "UOPS_RETIRED.MS" while their event terms are different, then during perf stat, the event for cpu_atom will parse fail and then no output for cpu_atom. UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/ It is because event terms in the "head" of parse_events_multi_pmu_add will be changed to event terms for cpu_core after parsing UOPS_RETIRED.MS for cpu_core, then when parsing the same event for cpu_atom, it still uses the event terms for cpu_core, but event terms for cpu_atom are different with cpu_core, the event parses for cpu_atom will fail. This patch fixes it, the event terms should be parsed from the original event. This patch can work for the hybrid systems that have the same event in more than 2 PMUs. It also can work in non-hybrid systems. Before: # perf stat -v -e UOPS_RETIRED.MS -a sleep 1 Using CPUID GenuineIntel-6-97-1 UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ Control descriptor is not initialized UOPS_RETIRED.MS: |
||
Weiguo Li
|
073a15c351 |
perf bench: Fix NULL check against wrong variable
We did a NULL check after "epollfdp = calloc(...)", but we checked "epollfd" instead of "epollfdp". Signed-off-by: Weiguo Li <liwg06@foxmail.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/tencent_B5D64530EB9C7DBB8D2C88A0C790F1489D0A@qq.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Weiguo Li
|
a7a72631f6 |
perf parse-events: Fix NULL check against wrong variable
We did a null check after "tmp->symbol = strdup(...)", but we checked "list->symbol" other than "tmp->symbol". Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Weiguo Li <liwg06@foxmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/tencent_DF39269807EC9425E24787E6DB632441A405@qq.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Alan Kao
|
aec499c75c |
nds32: Remove the architecture
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit RISC target designed by Andes Technologies. Support was added to the kernel in 2016 as the replacement RISC-V based V5 processors were already announced, and maintained by (current or former) Andes employees. As explained by Alan Kao, new customers are now all using RISC-V, and all known nds32 users are already on longterm stable kernels provided by Andes, with no development work going into mainline support any more. While the port is still in a reasonably good shape, it only gets worse over time without active maintainers, so it seems best to remove it before it becomes unusable. As always, if it turns out that there are mainline users after all, and they volunteer to maintain the port in the future, the removal can be reverted. Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/ Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/ Link: https://www.andestech.com/en/products-solutions/andestar-architecture/ Signed-off-by: Alan Kao <alankao@andestech.com> [arnd: rewrite changelog to provide more background] Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Anshuman Khandual
|
cedd3614e5 |
perf: Add irq and exception return branch types
This expands generic branch type classification by adding two more entries there in i.e irq and exception return. Also updates the x86 implementation to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes branch types reported to user space on x86 platform but it should not be a problem. The possible scenarios and impacts are enumerated here. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com |
||
German Gomez
|
13e741b834 |
perf script: Fix error when printing 'weight' field
In SPE traces the 'weight' field can't be printed in 'perf script'
because the 'dummy:u' event doesn't have the WEIGHT attribute set.
Use evsel__do_check_stype(..) to check this field, as it's done with
other fields such as "phys_addr".
Before:
$ perf record -e arm_spe_0// -- sleep 1
$ perf script -F event,ip,weight
Samples for 'dummy:u' event do not have WEIGHT attribute set. Cannot print 'weight' field.
After:
$ perf script -F event,ip,weight
l1d-access: 12 ffffaf629d4cb320
tlb-access: 12 ffffaf629d4cb320
memory: 12 ffffaf629d4cb320
Fixes:
|
||
Alexey Bayduraev
|
69560e366f |
perf data: Fix double free in perf_session__delete()
When perf_data__create_dir() fails, it calls close_dir(), but
perf_session__delete() also calls close_dir() and since dir.version and
dir.nr were initialized by perf_data__create_dir(), a double free occurs.
This patch moves the initialization of dir.version and dir.nr after
successful initialization of dir.files, that prevents double freeing.
This behavior is already implemented in perf_data__open_dir().
Fixes:
|
||
Mark Rutland
|
be9aea7440 |
linkage: remove SYM_FUNC_{START,END}_ALIAS()
Now that all aliases are defined using SYM_FUNC_ALIAS(), remove the old
SYM_FUNC_{START,END}_ALIAS() macros.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220216162229.1076788-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Mark Rutland
|
e0891269a8 |
linkage: add SYM_FUNC_ALIAS{,_LOCAL,_WEAK}()
Currently aliasing an asm function requires adding START and END annotations for each name, as per Documentation/asm-annotations.rst: SYM_FUNC_START_ALIAS(__memset) SYM_FUNC_START(memset) ... asm insns ... SYM_FUNC_END(memset) SYM_FUNC_END_ALIAS(__memset) This is more painful than necessary to maintain, especially where a function has many aliases, some of which we may wish to define conditionally. For example, arm64's memcpy/memmove implementation (which uses some arch-specific SYM_*() helpers) has: SYM_FUNC_START_ALIAS(__memmove) SYM_FUNC_START_ALIAS_WEAK_PI(memmove) SYM_FUNC_START_ALIAS(__memcpy) SYM_FUNC_START_WEAK_PI(memcpy) ... asm insns ... SYM_FUNC_END_PI(memcpy) EXPORT_SYMBOL(memcpy) SYM_FUNC_END_ALIAS(__memcpy) EXPORT_SYMBOL(__memcpy) SYM_FUNC_END_ALIAS_PI(memmove) EXPORT_SYMBOL(memmove) SYM_FUNC_END_ALIAS(__memmove) EXPORT_SYMBOL(__memmove) SYM_FUNC_START(name) It would be much nicer if we could define the aliases *after* the standard function definition. This would avoid the need to specify each symbol name twice, and would make it easier to spot the canonical function definition. This patch adds new macros to allow us to do so, which allows the above example to be rewritten more succinctly as: SYM_FUNC_START(__pi_memcpy) ... asm insns ... SYM_FUNC_END(__pi_memcpy) SYM_FUNC_ALIAS(__memcpy, __pi_memcpy) EXPORT_SYMBOL(__memcpy) SYM_FUNC_ALIAS_WEAK(memcpy, __memcpy) EXPORT_SYMBOL(memcpy) SYM_FUNC_ALIAS(__pi_memmove, __pi_memcpy) SYM_FUNC_ALIAS(__memmove, __pi_memmove) EXPORT_SYMBOL(__memmove) SYM_FUNC_ALIAS_WEAK(memmove, __memmove) EXPORT_SYMBOL(memmove) The reduction in duplication will also make it possible to replace some uses of WEAK with more accurate Kconfig guards, e.g. #ifndef CONFIG_KASAN SYM_FUNC_ALIAS(memmove, __memmove) EXPORT_SYMBOL(memmove) #endif ... which should make it easier to ensure that symbols are neither used nor overidden unexpectedly. The existing SYM_FUNC_START_ALIAS() and SYM_FUNC_START_LOCAL_ALIAS() are marked as deprecated, and will be removed once existing users are moved over to the new scheme. The tools/perf/ copy of linkage.h is updated to match. A subsequent patch will depend upon this when updating the x86 asm annotations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220216162229.1076788-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Zhengjun Xing
|
8a3d2ee0de |
perf evlist: Fix failed to use cpu list for uncore events
The 'perf record' and 'perf stat' commands have supported the option '-C/--cpus' to count or collect only on the list of CPUs provided. Commit |
||
John Garry
|
f268088f65 |
perf test: Skip failing sigtrap test for arm+aarch64
Skip the Sigtrap test for arm + arm64, same as was done for s390 in commit |
||
Arnaldo Carvalho de Melo
|
31ded1535e |
perf bpf: Defer freeing string after possible strlen() on it
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Fixes:
|
||
|
German Gomez
|
047e6032c4 |
perf test: Fix arm64 perf_event_attr tests wrt --call-graph initialization
The struct perf_event_attr is initialised differently in Arm64 when
recording in call-graph fp mode, so update the relevant tests, and add
two extra arm64-only tests.
Before:
$ perf test 17 -v
17: Setup struct perf_event_attr
[...]
running './tests/attr/test-record-graph-default'
expected sample_type=295, got 4391
expected sample_regs_user=0, got 1073741824
FAILED './tests/attr/test-record-graph-default' - match failure
test child finished with -1
---- end ----
After:
[...]
running './tests/attr/test-record-graph-default-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-fp-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-default'
running './tests/attr/test-record-graph-fp'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-fp'
[...]
Fixes:
|
||
James Clark
|
9de0736973 |
perf cs-etm: Fix corrupt inject files when only last branch option is enabled
'perf inject' with Coresight data generates files that cannot be opened when only the last branch option is specified: perf inject -i perf.data --itrace=l -o inject.data perf script -i inject.data 0x33faa8 [0x8]: failed to process type: 9 [Bad address] This is because cs_etm__synth_instruction_sample() is called even when the sample type for instructions hasn't been setup. Last branch records are attached to instruction samples so it doesn't make sense to generate them when --itrace=i isn't specified anyway. This change disables all calls of cs_etm__synth_instruction_sample() unless --itrace=i is specified, resulting in a file with no samples if only --itrace=l is provided, rather than a bad file. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220210200620.1227232-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
0b31ea6613 |
perf cs-etm: No-op refactor of synth opt usage
sample_branches and sample_instructions are already saved in the synth_opts struct. Other usages like synth_opts.last_branch don't save a value, so make this more consistent by always going through synth_opts and not saving duplicate values. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220210200620.1227232-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Changbin Du
|
de9f498d2b |
perf trace: Avoid early exit due SIGCHLD from non-workload processes
The function trace__symbols_init() runs "perf-read-vdso32" and that ends up
with a SIGCHLD delivered to 'perf'. And this SIGCHLD make perf exit early.
'perf trace' should exit only if the SIGCHLD is from our workload process.
So let's use sigaction() instead of signal() to match such condition.
Committer notes:
Use memset to zero the 'struct sigaction' variable as the '= { 0 }'
method isn't accepted in many compiler versions, e.g.:
4 34.02 alpine:3.6 : FAIL clang version 4.0.0 (tags/RELEASE_400/final)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
6 32.60 alpine:3.8 : FAIL gcc version 6.4.0 (Alpine 6.4.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
7 34.82 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220208140725.3947-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Changbin Du
|
fceb62124d |
perf ftrace: system_wide collection is not effective by default
The ftrace.target.system_wide must be set before invoking
evlist__create_maps(), otherwise it has no effect.
Fixes:
|
||
|
Ian Rogers
|
b2b1aa73ad |
perf stat: Fix display of grouped aliased events
An event may have a number of uncore aliases that when added to the
evlist are consecutive.
If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.
The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.
The reordering for groups breaks the assumption and so all counts are
printed.
This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.
Before:
```
$ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1
Performance counter stats for 'system wide':
CPU0 256,866 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 494,413 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 967 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,738 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 285,161 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 429,920 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,443 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 310,753 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 416,657 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,231 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,573 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 416,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 405,966 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,481 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,447 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 312,911 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 408,154 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,086 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,380 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 333,994 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 370,349 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,287 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,335 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 188,107 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 302,423 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 701 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,070 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 307,221 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 383,642 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,036 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,158 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 318,479 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 821,545 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,028 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,550 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 227,618 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 372,272 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 903 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 376,783 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 419,827 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,406 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,453 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 286,583 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 429,956 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 999 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,436 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 313,867 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 370,159 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,114 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 409,111 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,399 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,684 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 365,828 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 376,037 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,378 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,411 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 382,456 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 621,743 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,232 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,316 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 385,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,176 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,268 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 373,588 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 386,163 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,394 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,464 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 381,206 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 546,891 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,266 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,712 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 221,176 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 392,069 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 831 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 355,401 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 705,595 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,235 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,216 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 371,436 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 428,103 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,306 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,442 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 384,352 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 504,200 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,468 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,860 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 228,856 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 287,976 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 832 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,060 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 215,121 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 334,162 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 681 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,026 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 296,179 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 436,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,084 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,525 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 262,296 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 416,573 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 986 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,533 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 285,852 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 359,842 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,073 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,326 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 303,379 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 367,222 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,008 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,156 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 273,487 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 425,449 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 932 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,367 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 297,596 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 414,793 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,140 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,601 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,365 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 360,422 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,342 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 327,196 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 580,858 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,122 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,014 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 296,564 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 452,817 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,087 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,694 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 375,002 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 389,393 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,478 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,540 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 365,213 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 594,685 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,401 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,222 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 1,000,749,060 ns duration_time
1.000749060 seconds time elapsed
```
After:
```
Performance counter stats for 'system wide':
CPU0 20,547,434 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 45,202,862 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 82,001 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 159,688 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 1,000,464,828 ns duration_time
1.000464828 seconds time elapsed
```
Fixes:
|
||
|
German Gomez
|
05b5a9d628 |
perf tools: Apply correct label to user/kernel symbols in branch mode
In branch mode, the branch symbols were being displayed with incorrect
cpumode labels. So fix this.
For example, before:
# perf record -b -a -- sleep 1
# perf report -b
Overhead Command Source Shared Object Source Symbol Target Symbol
0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state
==> 0.08% cmd0 [kernel.kallsyms] [.] psi_group_change [.] psi_group_change
0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change
After:
# perf report -b
Overhead Command Source Shared Object Source Symbol Target Symbol
0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state
0.08% cmd0 [kernel.kallsyms] [k] psi_group_change [k] pei_group_change
0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220126105927.3411216-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Masanari Iida
|
a2887b9b8d |
perf bpf: Fix a typo in bpf_counter_cgroup.c
This patch fixes a spelling typo in error message. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20211225005558.503935-1-standby24x7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Leo Yan
|
bc9c806e52 |
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
For perf recording, it retrieves process info by iterating nodes in proc fs. If we run perf in a non-root PID namespace with command: # unshare --fork --pid perf record -e cycles -a -- test_program ... in this case, unshare command creates a child PID namespace and launches perf tool in it, but the issue is the proc fs is not mounted for the non-root PID namespace, this leads to the perf tool gathering process info from its parent PID namespace. We can use below command to observe the process nodes under proc fs: # unshare --pid --fork ls /proc 1 137 1968 2128 3 342 48 62 78 crypto kcore net uptime 10 138 2 2142 30 35 49 63 8 devices keys pagetypeinfo version 11 139 20 2143 304 36 50 64 82 device-tree key-users partitions vmallocinfo 12 14 2011 22 305 37 51 65 83 diskstats kmsg self vmstat 128 140 2038 23 307 39 52 656 84 driver kpagecgroup slabinfo zoneinfo 129 15 2074 24 309 4 53 67 9 execdomains kpagecount softirqs 13 16 2094 241 31 40 54 68 asound fb kpageflags stat 130 164 2096 242 310 41 55 69 buddyinfo filesystems loadavg swaps 131 17 2098 25 317 42 56 70 bus fs locks sys 132 175 21 26 32 43 57 71 cgroups interrupts meminfo sysrq-trigger 133 179 2102 263 329 44 58 75 cmdline iomem misc sysvipc 134 1875 2103 27 330 45 59 76 config.gz ioports modules thread-self 135 19 2117 29 333 46 6 77 consoles irq mounts timer_list 136 1941 2121 298 34 47 60 773 cpuinfo kallsyms mtd tty So it shows many existed tasks, since unshared command has not mounted the proc fs for the new created PID namespace, it still accesses the proc fs of the root PID namespace. This leads to two prominent issues: - Firstly, PID values are mismatched between thread info and samples. The gathered thread info are coming from the proc fs of the root PID namespace, but samples record its PID from the child PID namespace. - The second issue is profiled program 'test_program' returns its forked PID number from the child PID namespace, perf tool wrongly uses this PID number to retrieve the process info via the proc fs of the root PID namespace. To avoid issues, we need to mount proc fs for the child PID namespace with the option '--mount-proc' when use unshare command: # unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program Conversely, when the proc fs of the root PID namespace is used by child namespace, perf tool can detect the multiple PID levels and nsinfo__is_in_root_namespace() returns false, this patch reports error for this case: # unshare --fork --pid perf record -e cycles -a -- test_program Couldn't synthesize bpf events. Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace. Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command. Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20211224124014.2492751-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ameer Hamza
|
d792a7a94c |
perf session: Check for NULL pointer before dereference
Move NULL pointer check before dereferencing the variable.
Addresses-Coverity: 1497622 ("Derereference before null check")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/20220125121141.18347-1-amhamza.mgc@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Namhyung Kim
|
a663520fcc |
perf annotate: Set error stream of objdump process for TUI
The stderr should be set to a pipe when using TUI. Otherwise it'd print to stdout and break TUI windows with an error message. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220202070828.143303-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Anshuman Khandual
|
ae65b443f0 |
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
This updates branch sample type with missing PERF_SAMPLE_BRANCH_TYPE_SAVE. Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/1643799443-15109-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
100198322b |
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
This new PR_SET_VMA value isn't in sequence with all the other prctl
arguments and instead uses a big, 0x prefixed hex number: 0x53564d41 (S V M A).
This makes it harder to generate a string table as it would be rather
sparse, so make the regexp more stricter to avoid catching those.
A followup patch for 'perf trace' to cope with such oddities will be
needed, but then its a matter for the next merge window.
The next patch will update the prctl.h file to cope with this perf build
warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Here is the output of this script:
$ tools/perf/trace/beauty/prctl_option.sh
static const char *prctl_options[] = {
[1] = "SET_PDEATHSIG",
[2] = "GET_PDEATHSIG",
[3] = "GET_DUMPABLE",
[4] = "SET_DUMPABLE",
[5] = "GET_UNALIGN",
[6] = "SET_UNALIGN",
[7] = "GET_KEEPCAPS",
[8] = "SET_KEEPCAPS",
[9] = "GET_FPEMU",
[10] = "SET_FPEMU",
[11] = "GET_FPEXC",
[12] = "SET_FPEXC",
[13] = "GET_TIMING",
[14] = "SET_TIMING",
[15] = "SET_NAME",
[16] = "GET_NAME",
[19] = "GET_ENDIAN",
[20] = "SET_ENDIAN",
[21] = "GET_SECCOMP",
[22] = "SET_SECCOMP",
[23] = "CAPBSET_READ",
[24] = "CAPBSET_DROP",
[25] = "GET_TSC",
[26] = "SET_TSC",
[27] = "GET_SECUREBITS",
[28] = "SET_SECUREBITS",
[29] = "SET_TIMERSLACK",
[30] = "GET_TIMERSLACK",
[31] = "TASK_PERF_EVENTS_DISABLE",
[32] = "TASK_PERF_EVENTS_ENABLE",
[33] = "MCE_KILL",
[34] = "MCE_KILL_GET",
[35] = "SET_MM",
[36] = "SET_CHILD_SUBREAPER",
[37] = "GET_CHILD_SUBREAPER",
[38] = "SET_NO_NEW_PRIVS",
[39] = "GET_NO_NEW_PRIVS",
[40] = "GET_TID_ADDRESS",
[41] = "SET_THP_DISABLE",
[42] = "GET_THP_DISABLE",
[43] = "MPX_ENABLE_MANAGEMENT",
[44] = "MPX_DISABLE_MANAGEMENT",
[45] = "SET_FP_MODE",
[46] = "GET_FP_MODE",
[47] = "CAP_AMBIENT",
[50] = "SVE_SET_VL",
[51] = "SVE_GET_VL",
[52] = "GET_SPECULATION_CTRL",
[53] = "SET_SPECULATION_CTRL",
[54] = "PAC_RESET_KEYS",
[55] = "SET_TAGGED_ADDR_CTRL",
[56] = "GET_TAGGED_ADDR_CTRL",
[57] = "SET_IO_FLUSHER",
[58] = "GET_IO_FLUSHER",
[59] = "SET_SYSCALL_USER_DISPATCH",
[60] = "PAC_SET_ENABLED_KEYS",
[61] = "PAC_GET_ENABLED_KEYS",
[62] = "SCHED_CORE",
};
static const char *prctl_set_mm_options[] = {
[1] = "START_CODE",
[2] = "END_CODE",
[3] = "START_DATA",
[4] = "END_DATA",
[5] = "START_STACK",
[6] = "START_BRK",
[7] = "BRK",
[8] = "ARG_START",
[9] = "ARG_END",
[10] = "ENV_START",
[11] = "ENV_END",
[12] = "AUXV",
[13] = "EXE_FILE",
[14] = "MAP",
[15] = "MAP_SIZE",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Colin Cross <ccross@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Link: https://lore.kernel.org/lkml/YflZqY0rYQ3d1bKt@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Adrian Hunter
|
cdb63ba98c |
perf/tests: Add AVX512-FP16 instructions to x86 instruction decoder test
The x86 instruction decoder is used for both kernel instructions and user space instructions (e.g. uprobes, perf tools Intel PT), so it is good to update it with new instructions. Add AVX512-FP16 instructions to x86 instruction decoder test. A subsequent patch adds the instructions to the instruction decoder. Reference: Intel AVX512-FP16 Architecture Specification June 2021 Revision 1.0 Document Number: 347407-001US Example: $ perf test -v "x86 instruction decoder" |& grep vfcmaddcph | head -2 Failed to decode: 62 f6 6f 48 56 cb vfcmaddcph %zmm3,%zmm2,%zmm1 Failed to decode: 62 f6 6f 48 56 8c c8 78 56 34 12 vfcmaddcph 0x12345678(%eax,%ecx,8),%zmm2,%zmm1 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20211202095029.2165714-6-adrian.hunter@intel.com |
||
|
Adrian Hunter
|
a6ea1142de |
perf/tests: Add misc instructions to the x86 instruction decoder test
The x86 instruction decoder is used for both kernel instructions and user space instructions (e.g. uprobes, perf tools Intel PT), so it is good to update it with new instructions. Add the following instructions to the x86 instruction decoder test: User Interrupt clui senduipi stui testui uiret Prediction history reset hreset Serialize instruction execution serialize TSX suspend load address tracking xresldtrk xsusldtrk A subsequent patch adds the instructions to the instruction decoder. Reference: Intel Architecture Instruction Set Extensions and Future Features Programming Reference May 2021 Document Number: 319433-044 Example: $ perf test -v "x86 instruction decoder" |& grep -i hreset Failed to decode length (4 vs expected 6): f3 0f 3a f0 c0 00 hreset $0x0 Failed to decode length (4 vs expected 6): f3 0f 3a f0 c0 00 hreset $0x0 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20211202095029.2165714-4-adrian.hunter@intel.com |
||
|
Adrian Hunter
|
4810dd2c94 |
perf/tests: Add AMX instructions to x86 instruction decoder test
The x86 instruction decoder is used for both kernel instructions and user space instructions (e.g. uprobes, perf tools Intel PT), so it is good to update it with new instructions. Add AMX instructions to the x86 instruction decoder test. A subsequent patch adds the instructions to the instruction decoder. Reference: Intel Architecture Instruction Set Extensions and Future Features Programming Reference May 2021 Document Number: 319433-044 Example: $ INSN='ldtilecfg\|sttilecfg\|tdpbf16ps\|tdpbssd\|' $ INSN+='tdpbsud\|tdpbusd\|'tdpbuud\|tileloadd\|' $ INSN+='tileloaddt1\|tilerelease\|tilestored\|tilezero' $ perf test -v "x86 instruction decoder" |& grep -i $INSN Failed to decode: c4 e2 78 49 04 c8 ldtilecfg (%rax,%rcx,8) Failed to decode: c4 c2 78 49 04 c8 ldtilecfg (%r8,%rcx,8) Failed to decode: c4 e2 79 49 04 c8 sttilecfg (%rax,%rcx,8) Failed to decode: c4 c2 79 49 04 c8 sttilecfg (%r8,%rcx,8) Failed to decode: c4 e2 7a 5c d1 tdpbf16ps %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 7b 5e d1 tdpbssd %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 7a 5e d1 tdpbsud %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 79 5e d1 tdpbusd %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 78 5e d1 tdpbuud %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 7b 4b 0c c8 tileloadd (%rax,%rcx,8),%tmm1 Failed to decode: c4 c2 7b 4b 14 c8 tileloadd (%r8,%rcx,8),%tmm2 Failed to decode: c4 e2 79 4b 0c c8 tileloaddt1 (%rax,%rcx,8),%tmm1 Failed to decode: c4 c2 79 4b 14 c8 tileloaddt1 (%r8,%rcx,8),%tmm2 Failed to decode: c4 e2 78 49 c0 tilerelease Failed to decode: c4 e2 7a 4b 0c c8 tilestored %tmm1,(%rax,%rcx,8) Failed to decode: c4 c2 7a 4b 14 c8 tilestored %tmm2,(%r8,%rcx,8) Failed to decode: c4 e2 7b 49 c0 tilezero %tmm0 Failed to decode: c4 e2 7b 49 f8 tilezero %tmm7 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20211202095029.2165714-2-adrian.hunter@intel.com |
||
Minghao Chi
|
f0ac5b8581 |
perf tools: Remove redundant err variable
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
John Garry
|
b4a7276c5e |
perf test: Add parse-events test for aliases with hyphens
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
John Garry
|
34fa67e720 |
perf test: Add pmu-events test for aliases with hyphens
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
John Garry
|
864bc8c905 |
perf parse-events: Support event alias in form foo-bar-baz
Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.
The HiSilicon D06 platform has events in such form:
$ ./perf list sdir-home-migrate
List of pre-defined events (to be used in -e):
uncore hha:
sdir-home-migrate
[Unit: hisi_sccl,hha]
$ sudo ./perf stat -e sdir-home-migrate
event syntax error: 'sdir-home-migrate'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event>event selector. use 'perf list' to list available events
To support, add an extra PMU event symbol type for "baz", and add a new
rule in the bison file.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
German Gomez
|
3606c0e1a1 |
perf evsel: Override attr->sample_period for non-libpfm4 events
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes:
|
||
Lv Ruyi
|
24ead7c254 |
perf cpumap: Remove duplicate include in cpumap.h
Remove all but the first include of stdbool.h from cpumap.h. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cn Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
4402869939 |
perf cpumap: Migrate to libperf cpumap api
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: André Almeida <andrealmeid@collabora.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
1d1d9af254 |
perf python: Fix cpu_map__item() building
Value should be built as an integer.
Switch some uses of perf_cpu_map to use the library API.
Fixes:
|
||
Yao Jin
|
9edcde68d6 |
perf script: Fix printing 'phys_addr' failure issue
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by: German Gomez <german.gomez@arm.com> Signed-off-by: Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
6e10e21915 |
tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
To pick the changes in these csets:
|
||
|
Arnaldo Carvalho de Melo
|
9d5f0c3643 |
perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
Its more intention revealing, and if we're interested in the odd cases
where this may end up truncating we can do debug checks at one
centralized place.
Motivation, of all the container builds, fedora rawhide started
complaining of:
util/machine.c: In function ‘machine__create_modules’:
util/machine.c:1419:50: error: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=]
1419 | snprintf(path, sizeof(path), "%s/%s", dir_name, dent->d_name);
| ^~
In file included from /usr/include/stdio.h:894,
from util/branch.h:9,
from util/callchain.h:8,
from util/machine.c:7:
In function ‘snprintf’,
inlined from ‘maps__set_modules_path_dir’ at util/machine.c:1419:3,
inlined from ‘machine__set_modules_path’ at util/machine.c:1473:9,
inlined from ‘machine__create_modules’ at util/machine.c:1519:7:
/usr/include/bits/stdio2.h:71:10: note: ‘__builtin___snprintf_chk’ output between 2 and 4352 bytes into a destination of size 4096
There are other places where we should use path__join(), but lets get rid of
this one first.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: Link: https://lore.kernel.org/r/YebZKjwgfdOz0lAs@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
0d3d237651 |
perf evlist: No need to setup affinities when disabling events for pid targets
When the target is a pid, not started by 'perf stat' we need to disable the events, and in that case there is no need to setup affinities as we use a dummy CPU map, with just one entry set to -1. So stop doing it to avoid this needless call to sched_getaffinity(): # strace -ke sched_getaffinity perf stat -e cycles -p 241957 sleep 1 <SNIP> sched_getaffinity(0, 512, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]) = 8 > /usr/lib64/libc-2.33.so(sched_getaffinity@@GLIBC_2.3.4+0x1a) [0xe6eea] > /var/home/acme/bin/perf(affinity__setup+0x6a) [0x532a2a] > /var/home/acme/bin/perf(__evlist__disable.constprop.0+0x27) [0x4b9827] > /var/home/acme/bin/perf(cmd_stat+0x29b5) [0x431725] > /var/home/acme/bin/perf(run_builtin+0x6a) [0x4a2cfa] > /var/home/acme/bin/perf(main+0x612) [0x40f8c2] > /usr/lib64/libc-2.33.so(__libc_start_main+0xd4) [0x27b74] > /var/home/acme/bin/perf(_start+0x2d) [0x40fadd] <SNIP> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117160931.1191712-5-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
f350ee9549 |
perf evlist: No need to setup affinities when enabling events for pid targets
When the target is a pid, not started by 'perf stat' we need to enable the events, and in that case there is no need to setup affinities as we use a dummy CPU map, with just one entry set to -1. So stop doing it to avoid this needless call to sched_getaffinity(): # strace -ke sched_getaffinity perf stat -e cycles -p 241957 sleep 1 <SNIP> sched_getaffinity(0, 512, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]) = 8 > /usr/lib64/libc-2.33.so(sched_getaffinity@@GLIBC_2.3.4+0x1a) [0xe6eea] > /var/home/acme/bin/perf(affinity__setup+0x6a) [0x5329ca] > /var/home/acme/bin/perf(__evlist__enable.constprop.0+0x23) [0x4b9693] > /var/home/acme/bin/perf(enable_counters+0x14d) [0x42de5d] > /var/home/acme/bin/perf(cmd_stat+0x2358) [0x4310c8] > /var/home/acme/bin/perf(run_builtin+0x6a) [0x4a2cfa] > /var/home/acme/bin/perf(main+0x612) [0x40f8c2] > /usr/lib64/libc-2.33.so(__libc_start_main+0xd4) [0x27b74] > /var/home/acme/bin/perf(_start+0x2d) [0x40fadd] <SNIP> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117160931.1191712-4-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
49de179577 |
perf stat: No need to setup affinities when starting a workload
I.e. the simple: $ perf stat sleep 1 Uses a dummy CPU map and thus there is no need to setup/cleanup affinities to avoid IPIs, etc. With this we're down to a sched_getaffinity() call, in the libnuma initialization, that probably can be removed in a followup patch. Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117160931.1191712-3-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
1855b796f2 |
perf affinity: Allow passing a NULL arg to affinity__cleanup()
Just like with free(), NULL is checked to avoid having all callers do it. Its convenient for when not using affinity setup/cleanup for dummy CPU maps, i.e. CPU maps for pid targets. Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117160931.1191712-2-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |