On Geminilake, sometimes audio card is not getting
detected after reboot. This is a spurious issue happening on
Geminilake. HW codec and HD audio controller link was going
out of sync for which there was a fix in i915 driver but
was not getting invoked for GLK. Extending this fix to GLK as well.
Tested by Du,Wenkai on GLK board.
Bspec: 21829
v2: Instead of checking GEN9_BC, BXT and GLK macros, use IS_GEN9 macro (Jani N)
Cc: <stable@vger.kernel.org> # b651bd2a3a ("drm/i915/audio: Fix audio enumeration issue on BXT")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: Abhay Kumar <abhay.Kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523989338-29677-1-git-send-email-gaurav.k.singh@intel.com
(cherry picked from commit 8221229046)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We have to cleanup after i915_perf_init(), even on the error path, as it
passes a pointer into the module to the sysfs core. If we fail to
unregister the sysctl table, we leave a dangling pointer which then may
explode anytime later.
Fixes: 9f9b2792b6 ("drm/i915/perf: reuse timestamp frequency from device info")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180414091233.32224-1-chris@chris-wilson.co.uk
(cherry picked from commit 9f172f6fbd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests
on some CI machines I have concluded that: a) the PMU readout of RC6 can
race against runtime PM transitions, and b) there are other reasons than
being runtime suspended which can cause intel_runtime_pm_get_if_in_use to
fail.
Therefore when estimating RC6 the code needs to assert we are indeed in
suspended state, and if not, the best we can do is return the last known
RC6 value.
Without this check we can calculate the estimated value based on un-
initialized or inappropriate internal state, which can result in over-
estimation, or in any case incorrect value being returned.
v2:
* Re-arrange the code a bit to avoid second unlock and return branch.
(Chris Wilson)
v3:
* Insert some strategic blank lines and improve commit msg.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1fe699e301 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410112704.24462-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 2924bdee21)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Along the eb_lookup_vmas() error path, the return value from
kmem_cache_alloc() was freed using kfree(). Fix it to use the proper
kmem_cache_free() instead.
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Xidong Wang <wangxidong_97@163.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180404093824.9313-1-chris@chris-wilson.co.uk
(cherry picked from commit 6be1187dbf)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When cancelling the requests and clearing out the ports following a
successful preemption completion, also clear the active flag. I had
assumed that all preemptions would be followed by an immediate dequeue
(preserving the active user flag), but under rare circumstances we may
be triggering a preemption for the second port only for it to have
completed before the preemotion kicks in; leaving execlists->active set
even though the system is now idle.
We can clear the flag inside the common execlists_cancel_port_requests()
as the other users also expect the semantics of active being cleared.
Fixes: f6322eddaf ("drm/i915/preemption: Allow preemption between submission ports")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180324125829.27026-1-chris@chris-wilson.co.uk
(cherry picked from commit eed7ec52f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Add drm_format_mod update, which is omitted.
Fixes: e546e281("drm/i915/gvt: Dmabuf support for GVT-g")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Much error exist in host dmesg during guest boot up with loca display
enabled.
gvt: vgpu 1: invalid range gmadr 0x0 size 0x0
This error happens when qemu get dmabuf info in case that the virtual
display plane is enabled but its base address is an invalid 0, such
case may be true before guest enable its plane. At this moment, its
state is copied from host where the plane may be enabled.
This patch disable primary/sprite/cursor plane at virtual display
initialization, so intel_vgpu_decode_primary/cursor/sprite could
return early as plane is disabled, then plane base check is skipped and
error message disapper.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Much error message exist in host dmesg when guest boot up with local
display enabled.
[ 167.680011] gvt: vgpu 1: invalid range gmadr 0x0 size 0x0
[ 167.680013] gvt: vgpu 1: invalid gma address: 0
The second error line duplicate with the first error line, so this
patch remove this redundant error message and make the next error
message much clearer.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We have canceled dma map for ppgtt entries. Also we need to do it for
ggtt entries when them are invalidated.
This can fix task hung issue as:
[13517.791767] INFO: task gvt_service_thr:1081 blocked for more than 120 seconds.
[13517.792584] Not tainted 4.14.15+ #3
[13517.793417] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[13517.794267] gvt_service_thr D 0 1081 2 0x80000000
[13517.795132] Call Trace:
[13517.795996] ? __schedule+0x493/0x77b
[13517.796859] schedule+0x79/0x82
[13517.797740] schedule_preempt_disabled+0x5/0x6
[13517.798614] __mutex_lock.isra.0+0x2b5/0x445
[13517.799504] ? __switch_to_asm+0x24/0x60
[13517.800381] ? intel_gvt_cleanup+0x10/0x10
[13517.801261] ? intel_gvt_schedule+0x19/0x2b9
[13517.802107] intel_gvt_schedule+0x19/0x2b9
[13517.802954] ? intel_gvt_cleanup+0x10/0x10
[13517.803824] gvt_service_thread+0xe3/0x10d
[13517.804704] ? wait_woken+0x68/0x68
[13517.805588] kthread+0x118/0x120
[13517.806478] ? kthread_create_on_node+0x3a/0x3a
[13517.807381] ? call_usermodehelper_exec_async+0x113/0x11a
[13517.808307] ret_from_fork+0x35/0x40
v3: split out ggtt reset case.
v2: also unmap ggtt during reset.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
- Mask mode type garbage from userspace (Ville)
Something went wrong on the misc tree side, but I'll pull the patch directly.
* 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc:
drm: Fix uabi regression by allowing garbage mode->type from userspace
GVT-g dispatches request to host i915 and depends on i915 notify
ring interrupt mechanism to check completion of request.
For now MI_USER_INTERRUPT in guest requests is passed through
in GVT-g cmd parser and i915 does not use it, which causes
unnecessary interrupt handling in i915.
On the other hand, if several requests from guest are combined into
one request in and contain MI_USER_INTERRUPT in the middle of
combined request. GVT-g still has to wait on the whole request to
complete to inject user interrupts to guest.
This patch makes all the MI_USER_INTERRUPT nop to save some interrupt
handling.
Here is test result to run glmark2 on guest for 10 seconds:
host master interrupts number is reduced from 16021 to 11162
host user interrupts number is reduced from 7936 to 3536
v2:
- revise commit message. (Kevin)
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1466154 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
- GPUVM support for dGPUs
- KFD events support for dGPUs
- Fix live-lock situation when restoring multiple evicted processes
- Fix VM page table allocation on large-bar systems
- Fix for build failure on frv architecture
* tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Use ordered workqueue to restore processes
drm/amdgpu: Fix acquiring VM on large-BAR systems
drm/amdkfd: Add module option for testing large-BAR functionality
drm/amdkfd: Kmap event page for dGPUs
drm/amdkfd: Add ioctls for GPUVM memory management
drm/amdkfd: Add TC flush on VMID deallocation for Hawaii
drm/amdkfd: Allocate CWSR trap handler memory for dGPUs
drm/amdkfd: Add per-process IDR for buffer handles
drm/amdkfd: Aperture setup for dGPUs
drm/amdkfd: Remove limit on number of GPUs
drm/amdkfd: Populate DRM render device minor
drm/amdkfd: Create KFD VMs on demand
drm/amdgpu: Add kfd2kgd interface to acquire an existing VM
drm/amdgpu: Add helper to turn an existing VM into a compute VM
drm/amdgpu: Fix initial validation of PD BO for KFD VMs
drm/amdgpu: Move KFD-specific fields into struct amdgpu_vm
drm/amdkfd: fix uninitialized variable use
drm/amdkfd: add missing include of mm.h
- Display fixes for booting with MST hub lid closed and display
freezing after hibernation (fd.o bugs 105470 & 105196)
- Fix for a very rare interrupt handling race resulting in GPU hang
* tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Fix hibernation with ACPI S0 target state
drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
drm/i915: Specify which engines to reset following semaphore/event lockups
drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
After
commit dd9f31c7a3
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Aug 16 17:46:07 2017 +0300
drm/i915/gen9+: Set same power state before hibernation image
save/restore
during hibernation/suspend the power domain functionality got disabled,
after which resume could leave it incorrectly disabled if the ACPI
target state was S0 during suspend and i915 was not loaded by the loader
kernel.
This was caused by not considering if we resumed from hibernation as the
condition for power domains reiniting.
Fix this by simply tracking if we suspended power domains during system
suspend and reinit power domains accordingly during resume. This will
result in reiniting power domains always when resuming from hibernation,
regardless of the platform and whether or not i915 is loaded by the
loader kernel.
The reason we didn't catch this earlier is that the enabled/disabled
state of power domains during PMSG_FREEZE/PMSG_QUIESCE is platform
and kernel config dependent: on my SKL the target state is S4
during PMSG_FREEZE and (with the driver loaded in the loader kernel)
S0 during PMSG_QUIESCE. On the reporter's machine it's S0 during
PMSG_FREEZE but (contrary to this) power domains are not initialized
during PMSG_QUIESCE since i915 is not loaded in the loader kernel, or
it's loaded but without the DMC firmware being available.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105196
Reported-and-tested-by: amn-bas@hotmail.com
Fixes: dd9f31c7a3 ("drm/i915/gen9+: Set same power state before hibernation image save/restore")
Cc: amn-bas@hotmail.com
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322143642.26883-1-imre.deak@intel.com
(cherry picked from commit 0f90603c33)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We were relying on the uncached reads when processing the CSB to provide
ourselves with the serialisation with the interrupt handler (so we could
detect new interrupts in the middle of processing the old one). However,
in commit 767a983ab2 ("drm/i915/execlists: Read the context-status HEAD
from the HWSP") those uncached reads were eliminated (on one path at
least) and along with them our serialisation. The result is that we
would very rarely miss notification of a new interrupt and leave a
context-switch unprocessed, hanging the GPU.
Fixes: 767a983ab2 ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321091027.21034-1-chris@chris-wilson.co.uk
(cherry picked from commit 9153e6b7c8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If the GPU is stuck waiting for an event or for a semaphore, we need to
reset the GPU in order to recover. We have to tell the reset routine
which engines we want reset, but we were still using the old interface
and declaring it as "not-fatal".
Fixes: 14b730fcb8 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk
(cherry picked from commit ca98317b89)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If bios sets up an MST output and hardware state readout code sees this is
an SST configuration, when disabling the encoder we end up calling
->post_disable_dp() hook instead of the MST version. Consequently, we write
to the DP_SET_POWER dpcd to set it D3 state. Further along when we try
enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up
the MST hub. This results in continuous link training failures which keep
the system busy delaying boot. We could identify bios MST boot discrepancy
and handle it accordingly but a simple way to solve this is to write to the
DP_SET_POWER dpcd for MST too.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5ea2355a10 ("drm/i915/mst: Use MST sideband message transactions for dpms control")
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit ad260ab32a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Last pull for 4.17. Highlights:
- Vega12 support
- A few more bug fixes and cleanups for powerplay
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (77 commits)
drm/amd/pp: clean header file hwmgr.h
drm/amd/pp: use mlck_table.count for array loop index limit
drm/amdgpu: Add an ATPX quirk for hybrid laptop
drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
drm/amd/pp: Add new asic support in pp_psm.c
drm/amd/pp: Clean up powerplay code on Vega12
drm/amd/pp: Add smu irq handlers for legacy asics
drm/amd/pp: Fix set wrong temperature range on smu7
drm/amdgpu: Don't change preferred domian when fallback GTT v5
drm/amdgpu: Fix NULL ptr on driver unload due to init failure.
drm/amdgpu: fix "mitigate workaround for i915"
drm/amd/pp: Add smu irq handlers in sw_init instand of hw_init
drm/amd/pp: Refine register_thermal_interrupt function
drm/amdgpu: Remove wrapper layer of cgs irq handling
drm/amd/powerplay: Return per DPM level clock
drm/amd/powerplay: Remove the SOC floor voltage setting
drm/amdgpu: no job timeout setting on compute queues
drm/amdgpu: add vega12 pci ids (v2)
drm/amd/powerplay: add the hw manager for vega12 (v4)
drm/amd/powerplay: add the smu manager for vega12 (v4)
...
Restoring multiple processes concurrently can lead to live-locks
where each process prevents the other from validating all its BOs.
v2: fix duplicate check of same variable
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On large-BAR systems the VM page tables for compute are accessed by
the CPU. Always allow CPU access to the page directory so that it can
be used later by the CPU when a VM is converted to a compute VM.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
v2: use temporaries to trivially reduces object size.
The for-loops process data in the mclk_table but use slck_table.count
as the loop index limit. I believe these are cut-n-paste errors from
the previous almost identical loops as indicated by static analysis.
Fix these.
Detected by CoverityScan, CID#1466001 ("Copy-paste error")
Fixes: 5d97cf39ff ("drm/amd/pp: Add and initialize OD_dpm_table for CI/VI.")
Fixes: 5e4d4fbea5 ("drm/amd/pp: Implement edit_dpm_table on smu7")
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apparently xf86-video-vmware leaves the mode->type uninitialized
when feeding the mode to the kernel. Thus we have no choice but
to accept the garbage in. We'll just ignore any of the bits we
don't want. The mode type is just a hint anyway, and more
useful for the kernel->userspace direction.
Reported-by: Thomas Hellstrom <thomas@shipmail.org>
CC: Thomas Hellstrom <thomas@shipmail.org>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: c6ed6dad5c ("drm/uapi: Validate the mode flags/type")
References: https://lists.freedesktop.org/archives/dri-devel/2018-March/170213.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321211246.10152-1-ville.syrjala@linux.intel.com
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The original ast driver cannot display properly if the resolution is 1280x800 and the pixel clock is 83.5MHz.
Here is the update to fix it.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
then we have a couple of error path fixes on the sun4i driver. Still on that
driver there is a clk fix and finally a mmap offset fix on the udl driver.
-----BEGIN PGP SIGNATURE-----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=BdJo
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Main change is a patch to reject getfb call for multiplanar framebuffers,
then we have a couple of error path fixes on the sun4i driver. Still on that
driver there is a clk fix and finally a mmap offset fix on the udl driver.
* tag 'drm-misc-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-misc:
drm: udl: Properly check framebuffer mmap offsets
drm: Reject getfb for multi-plane framebuffers
drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()'
drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()'
drm/sun4i: Fix an error handling path in 'sun4i_drv_bind()'
drm/sun4i: Fix exclusivity of the TCON clocks
GVT regression fix that caused guest VM GPU hang.
Fix for race conditions in declaring GPU wedged (hit in CI).
* tag 'drm-intel-next-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/gvt: force to set all context control bits from guest
drm/i915/gvt: Update PDPs after a vGPU mm object is pinned.
drm/i915/gvt: Invalidate vGPU PPGTT mm objects during a vGPU reset.
drm/i915/kvmgt: Handle kzalloc failure
drm/i915/gvt: fix spelling mistake: "destoried" -> "destroyed"
drm/i915/gvt: Remove reduntant printing of untracked mmio
drm/i915/pmu: Work around compiler warnings on some kernel configs
drm/i915: Only call tasklet_kill() on the first prepare_reset
drm/i915: Wrap engine->schedule in RCU locks for set-wedge protection
drm/i915/icl: do not save DDI A/E sharing bit for ICL
A relative large set of various improvements for vmwgfx. Some of them
have been around for a while, some are relatively new, but functionality
should have been tested in our standalone repo.
* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Bump version patchlevel and date
drm/vmwgfx: use monotonic event timestamps
drm/vmwgfx: Unpin the screen object backup buffer when not used
drm/vmwgfx: Stricter count of legacy surface device resources
drm/vmwgfx: Use kasprintf
drm/vmwgfx: Get rid of the device-private suspended member
drm/vmwgfx: Improve on hibernation
drm/vmwgfx: Avoid pinning fbdev framebuffers
drm/vmwgfx: Fix multiple command buffer context use
drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blits
drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bos
drm/ttm: Export the ttm_k[un]map_atomic_prot API.
drm/ttm: Clean up kmap_atomic_prot selection code
drm/vmwgfx: Cursor update fixes
drm/vmwgfx: Send the correct nonblock option for atomic_commit
drm/vmwgfx: Move the stdu vblank event to atomic function
drm/vmwgfx: Move screen object page flip to atomic function
drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flush
drm/vmwgfx: Move surface copy cmd to atomic function
drm/vmwgfx: Avoid iterating over display unit if crtc is available
Changes this time mostly come down to:
- hook up the DRM GPU scheduler
- prep work for GC7000L support, to be completed in the next cycle
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (22 commits)
drm/etnaviv: bump HW job limit to 4
drm/etnaviv: etnaviv_sched: Staticize functions when possible
drm/etnaviv: add PTA handling to MMUv2
drm/etnaviv: add function to load the initial PTA state
drm/etnaviv: handle security states
drm/etnaviv: add security handling mode enum
drm/etnaviv: add hardware database
drm/etnaviv: add more minor features fields
drm/etnaviv: update hardware headers from rnndb
drm/etnaviv: add support for slave interface clock
drm/etnaviv: split out and optimize MMU fault dumping
drm/etnaviv: remove the need for a gpu-subsystem DT node
dt-bindings: etnaviv: add slave interface clock
drm/etnaviv: use correct format specifier for size_t
drm/etnaviv: replace hangcheck with scheduler timeout
drm/etnaviv: lock BOs after all other submit work is done
drm/etnaviv: move dependency handling to scheduler
drm/etnaviv: hook up DRM GPU scheduler
drm/etnaviv: track fences by IDR instead of seqno
drm/etnaviv: add missing major features field to debugfs
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJasz1XAAoJEPpiX2QO6xPKnQEH/iG0588qoK48QKTJruPe1iBQ
5hR2GhSvecozB9cvXrm/eM2uHvjfgPiXStxIotI7GKgiYZC0hReKlpKDptoCHGVt
8EmA+eGYUaXjau/Qx7xASiOLjF64LwY4UhT2v3H5tcC9NuDayi2x2zPl4GwCrZ+D
mNZ/uh4vz7VonF34aZU+stb5owxfHZgWvOAF3K3Ey60QNFLoUVekLVdZM/Z1VWcK
7nrRpZL6p8v1RCKfXVekveEhF2l5LpNRtWNyHwWqi5nYQ1ArbIadEPAOaHVNoG23
rBdUgEtbyQ5XMfX5vWqo3pgJFqQFdjaqhMXYdDCDNE1Sfl0mdmVzoguYAQcA6Eo=
=2HIN
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-03-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
One fix for DP MST and one fix for GPU reset on hang check.
* tag 'drm-intel-fixes-2018-03-21' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Specify which engines to reset following semaphore/event lockups
drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
Two vmwgfx fixes for 4.16. Both cc'd stable.
* 'vmwgfx-fixes-4.16' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Fix a destoy-while-held mutex problem.
drm/vmwgfx: Fix black screen and device errors when running without fbdev
- fix an array underflow error by reordering the range check before the array
subscript in ipu-prg.
- make some local functions static in ipuv3-plane.
- add a missng header for ipu_planes_assign_pre in ipuv3-plane.
- move arming of the vblank event from atomic_begin to atomic_flush, to avoid
signalling atomic commit completion to userspace before plane atomic_update
has finished, due to a race condition that is likely to be hit on i.MX6QP on
PRE enabled channels.
-----BEGIN PGP SIGNATURE-----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=/nZS
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2018-03-22' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: fixes for early vblank event issue, array underflow error
- fix an array underflow error by reordering the range check before the array
subscript in ipu-prg.
- make some local functions static in ipuv3-plane.
- add a missng header for ipu_planes_assign_pre in ipuv3-plane.
- move arming of the vblank event from atomic_begin to atomic_flush, to avoid
signalling atomic commit completion to userspace before plane atomic_update
has finished, due to a race condition that is likely to be hit on i.MX6QP on
PRE enabled channels.
* tag 'imx-drm-fixes-2018-03-22' of git://git.pengutronix.de/git/pza/linux:
drm/imx: move arming of the vblank event to atomic_flush
drm/imx: ipuv3-plane: Include "imx-drm.h" header file
drm/imx: ipuv3-plane: Make functions static when possible
gpu: ipu-v3: prg: avoid possible array underflow
Trivial fix to spelling mistake in pr_err error message text
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In new asics(vega12), no power state management in driver,
So no need to implement related callback functions.
and add some ps checks in pp_psm.c
Revert "drm/amd/powerplay: add new pp_psm infrastructure for vega12 (v2)"
This reverts commit 7d1a63f3aa331b853e41f92d0e7890ed31de8c13.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the issue thermal irq was always triggered
as GPU under temperature range detected
The low temp in default thermal policy
was set to -273. so need to use int type for the low temp.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add sanity checking
v3: make code open
v4: also handle visible to invisible fallback
v5: Since two fallback cases, re-use goto retry
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM_VMW_EVENT_FENCE_SIGNALED (struct drm_vmw_event_fence) and
DRM_EVENT_VBLANK (struct drm_event_vblank) pass timestamps in 32-bit
seconds/microseconds format.
As of commit c61eef726a ("drm: add support for monotonic vblank
timestamps"), other DRM drivers use monotonic times for drm_event_vblank,
but vmwgfx still uses CLOCK_REALTIME for both events, which suffers from
the y2038/y2106 overflow as well as time jumps.
For consistency, this changes vmwgfx to use ktime_get_ts64 as well,
which solves those problems and avoids the deprecated do_gettimeofday()
function.
This should be transparent to to user space, as long as it doesn't
compare the time against the result of gettimeofday().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
We were relying on the pinned screen object backup buffer to be destroyed
when not used. But if we hold a copy of the atomic state, like when
hibernating, the backup buffer might not be destroyed since it's
refcounted by the atomic state. This causes us to hibernate with a
buffer pinned in VRAM.
Fix this by only having the buffer pinned when it is actually used by a
screen object.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
For legacy surfaces, they were previously registered as device resources
when the driver resources were created. Since they are evictable we instead
register them as device resources once they are created on the device,
just like for guest-backed surfaces. This has implications during
hibernation where we can't hibernate with device resources active.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Use kasprintf instead of combination of kmalloc and sprintf. Also,
remove the local variables used for storing the string length as they
are not required now.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
It was used to early block fbdev dirty processing. Replace it with an
unprotected check of the par->dirty.active field. While this might
race with the vmw_fb_off() function, we do a protected check later so
the race will at worst lead to grabbing and releasing a couple of locks.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Make it possible to hibernate also with masters that don't switch VT at
hibernation time. We save and restore modesetting state unless fbdev is
active and enabled at hibernation time.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
