Because fsverity_descriptor_location.version is constant,
so use macro for better reading.
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Function parameter mode could be TRANS_DIR_INO.
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
One fix for fs/verity/ to strengthen a memory barrier which might be too
weak. This mirrors a similar fix in fs/crypto/.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXyezbRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3geAQCT35f0xoQkOGLZVqHqlymI1otozKGP
N+arximQuWK2WAD/cKgth+/mJUBE2Ygcfef7hnFYD3maK2P6pzW1Q+GREAc=
=FeLN
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity update from Eric Biggers:
"One fix for fs/verity/ to strengthen a memory barrier which might be
too weak. This mirrors a similar fix in fs/crypto/"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: use smp_load_acquire() for ->i_verity_info
Allocate nic_info dynamically - n_entries is not constant.
Attach the tunnel offload info only to the uplink representor.
We expect the "main" netdev to be unregistered in switchdev
mode, and there to be only one uplink representor.
Drop the udp_tunnel_drop_rx_info() call, it was not there until
commit b3c2ed21c0 ("net/mlx5e: Fix VXLAN configuration restore after function reload")
so the device doesn't need it, and core should handle reloads and
reset just fine.
v2:
- don't drop the ndos on reprs, and register info on uplink repr.
v4:
- Move netdev tunnel structure handling to en_main.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5 has the IANA VXLAN port (4789) hard coded by the device,
instead of being added dynamically when tunnels are created.
To support this add a workaround flag to struct udp_tunnel_nic_info.
Skipping updates for the port is fairly trivial, dumping the hard
coded port via ethtool requires some code duplication. The port
is not a part of any real table, we dump it in a special table
which has no tunnel types supported and only one entry.
This is the last known workaround / hack needed to convert
all drivers to the new infra.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The DR TX state machine supports the following order:
modify header, push vlan and encapsulation.
Instead fs_dr would pass:
push vlan, modify header and encapsulation.
The above caused the rule creation to fail on invalid action
sequence provided error.
Fixes: 6a48faeeca ("net/mlx5: Add direct rule fs_cmd implementation")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently PF and VF representor netdevice carrier is always controlled
by controlling the representor netdevice device state as up/down.
Representor netdevice state change undergoes one or more txq/rxq
destroy/create commands to firmware, skb and its rx buffer allocation,
health reporters creation and more.
Due to this limitation users do not have the ability to just change
the carrier of the non uplink representors without modifying the
device state.
In one use case when the eswitch physical port carrier is down/up,
user needs to update the VF link state to same as physical port
carrier.
Example of updating VF representor carrier state:
$ ip link set enp0s8f0npf0vf0 carrier off
$ ip link set enp0s8f0npf0vf0 carrier on
This enhancement results into VF link state change which is
represented by the VF representor netdevice carrier.
This enables users to modify the representor carrier without modifying
the representor netdevice state.
A simple test is run using [1] to calculate the time difference between
updating carrier vs updating device state (to update just the carrier)
with one VF to simulate 255 VFs.
Time taken to update the carrier using device up/down:
$ time ./calculate.sh dev enp0s8f0npf0vf0
real 0m30.913s
user 0m0.200s
sys 0m11.168s
Time taken to update just the carrier using carrier iproute2 command:
$ time ./calculate.sh carrier enp0s8f0npf0vf0
real 0m2.142s
user 0m0.160s
sys 0m2.021s
Test shows that its better to use carrier on/off user interface to notify
link up/down event to VF compare to device up/down interface, because
carrier user interface delivers the same event 15 times faster.
[1] https://github.com/paravmellanox/myscripts/blob/master/calculate_carrier_time.sh
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This release, we add support for inline encryption via the blk-crypto
framework which was added in 5.8. Now when an ext4 or f2fs filesystem
is mounted with '-o inlinecrypt', the contents of encrypted files will
be encrypted/decrypted via blk-crypto, instead of directly using the
crypto API. This model allows taking advantage of the inline encryption
hardware that is integrated into the UFS or eMMC host controllers on
most mobile SoCs. Note that this is just an alternate implementation;
the ciphertext written to disk stays the same.
(This pull request does *not* include support for direct I/O on
encrypted files, which blk-crypto makes possible, since that part is
still being discussed.)
Besides the above feature update, there are also a few fixes and
cleanups, e.g. strengthening some memory barriers that may be too weak.
All these patches have been in linux-next with no reported issues. I've
also tested them with the fscrypt xfstests, as usual. It's also been
tested that the inline encryption support works with the support for
Qualcomm and Mediatek inline encryption hardware that will be in the
scsi pull request for 5.9. Also, several SoC vendors are already using
a previous, functionally equivalent version of these patches.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXye2EBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK0veAQCKEnwvy+M6s2/QWhC9vo01rABMtt7h
VRAAKPiFzLNH3AD/dCnZNsFUzk3x0ZyiU1YRW3FvlxFOaEO7Ea0Pt/pyyQ0=
=g9FK
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release, we add support for inline encryption via the blk-crypto
framework which was added in 5.8.
Now when an ext4 or f2fs filesystem is mounted with '-o inlinecrypt',
the contents of encrypted files will be encrypted/decrypted via
blk-crypto, instead of directly using the crypto API. This model
allows taking advantage of the inline encryption hardware that is
integrated into the UFS or eMMC host controllers on most mobile SoCs.
Note that this is just an alternate implementation; the ciphertext
written to disk stays the same.
(This pull request does *not* include support for direct I/O on
encrypted files, which blk-crypto makes possible, since that part is
still being discussed.)
Besides the above feature update, there are also a few fixes and
cleanups, e.g. strengthening some memory barriers that may be too
weak.
All these patches have been in linux-next with no reported issues.
I've also tested them with the fscrypt xfstests, as usual. It's also
been tested that the inline encryption support works with the support
for Qualcomm and Mediatek inline encryption hardware that will be in
the scsi pull request for 5.9. Also, several SoC vendors are already
using a previous, functionally equivalent version of these patches"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: don't load ->i_crypt_info before it's known to be valid
fscrypt: document inline encryption support
fscrypt: use smp_load_acquire() for ->i_crypt_info
fscrypt: use smp_load_acquire() for ->s_master_keys
fscrypt: use smp_load_acquire() for fscrypt_prepared_key
fscrypt: switch fscrypt_do_sha256() to use the SHA-256 library
fscrypt: restrict IV_INO_LBLK_* to AES-256-XTS
fscrypt: rename FS_KEY_DERIVATION_NONCE_SIZE
fscrypt: add comments that describe the HKDF info strings
ext4: add inline encryption support
f2fs: add inline encryption support
fscrypt: add inline encryption support
fs: introduce SB_INLINECRYPT
-----BEGIN PGP SIGNATURE-----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=HNGC
-----END PGP SIGNATURE-----
Merge tag 'for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"We don't have any big feature updates this time, there are lots of
small enhacements or fixes. A highlight perhaps is the parallel fsync
performance improvements, numbers below.
Regarding the dio/iomap that was reverted last time, the required API
changes are likely to land in the upcoming cycle, the btrfs part will
be updated afterwards.
User visible changes:
- new mount option rescue= to group all recovery-related mount
options so we don't have many specific options, currently
introducing only aliases for existing options, future extensions
are in development to allow read-only mount with partially damaged
structures:
- usebackuproot is an alias for rescue=usebackuproot
- nologreplay is an alias for rescue=nologreplay
- start deprecation of mount option inode_cache, removal scheduled to
v5.11
- removed deprecated mount options alloc_start and subvolrootid
- device stats corruption counter gets incremented when a checksum
mismatch is found
- qgroup information exported in /sys/fs/btrfs/<UUID>/qgroups/<id>
using sysfs
- add link /sys/fs/btrfs/<UUID>/bdi pointing to the associated
backing dev info
- FS_INFO ioctl enhancements:
- add flags to request/describe newly added items
- new item: numeric checksum type and checksum size
- new item: generation
- new item: metadata_uuid
- seed device: with one new read-write device added, print the new
device information in /proc/mounts
- balance: detect cancellation by Ctrl-C in existing cancellation
points
Performance improvements:
- optimized versions of various helpers on little-endian
architectures, where we don't have to do LE/BE conversion from
on-disk format
- tree-log/fsync optimizations leading to lower max latency reported
by dbench, reduced by about 12%
- all chunk tree leaves are prefetched at mount time, can improve
mount time on large (terabyte-sized) filesystems
- speed up parallel fsync of files with reflinked/deduped extents,
with jobs 16 to 1024 the throughput gets improved roughly by 50% on
average and runtime decreased roughly by 30% on average, notable
outlier is 128 jobs with +121.2% on throughput and -54.6% runtime
- another speed up of parallel fsync, reduce number of checksum tree
lookups and contention, the improvements start to show up with 2
tasks with +20% throughput and -16% runtime up to 64 with +200%
throughput and -66% runtime
Core:
- umount-time qgroup leak checker
- qgroups
- add a way to unreserve partial range after failure, avoiding
some EDQUOT errors
- improved flushing logic when EDQUOT is hit
- possible EINTR interruption caused by failed reservations after
transaction start is better handled and documented
- transaction abort errors are unified to EROFS in case it's not the
original reason of abort or we don't have other way to determine
the reason
Fixes:
- make truncate succeed on a NOCOW file even if data space is
exhausted
- fix cancelling balance on filesystem with exhausted metadata space
- anon block device:
- preallocate anon bdev when subvolume is created to report
failure early
- shorten time the anon bdev id is allocated
- don't allocate anon bdev for internal roots
- minor memory leak in ref-verify
- refuse invalid combinations of compression and NOCOW file flags
- lockdep fixes, updating the device locks
- remove obsolete fallback logic for block group profile adjustments
when switching from 1 to more devices, causing allocation of
unwanted block groups
Other cleanups, refactoring, simplifications:
- conversions from struct inode to struct btrfs_inode in internal
functions
- removal of unused struct members"
* tag 'for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (151 commits)
btrfs: do not set the full sync flag on the inode during page release
btrfs: release old extent maps during page release
btrfs: fix race between page release and a fast fsync
btrfs: open-code remount flag setting in btrfs_remount
btrfs: if we're restriping, use the target restripe profile
btrfs: don't adjust bg flags and use default allocation profiles
btrfs: fix lockdep splat from btrfs_dump_space_info
btrfs: move the chunk_mutex in btrfs_read_chunk_tree
btrfs: open device without device_list_mutex
btrfs: sysfs: use NOFS for device creation
btrfs: return EROFS for BTRFS_FS_STATE_ERROR cases
btrfs: document special case error codes for fs errors
btrfs: don't WARN if we abort a transaction with EROFS
btrfs: reduce contention on log trees when logging checksums
btrfs: remove done label in writepage_delalloc
btrfs: add comments for btrfs_reserve_flush_enum
btrfs: relocation: review the call sites which can be interrupted by signal
btrfs: avoid possible signal interruption of btrfs_drop_snapshot() on relocation tree
btrfs: relocation: allow signal to cancel balance
btrfs: raid56: remove out label in __raid56_parity_recover
...
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXxp/7yAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0keXAQDcGHPuKqZupIm6
YRKskWPg9IDeuA7E/Edeey1BksjU8gEAqf1ghVyFM0Tzhd8uWiy2PGwZOvb5MyX8
wL3dCnv3VwA=
=Yg1/
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v5.9' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"An issue was fixed with the TPM space buffer size. The buffer is used
to store in-TPM objects while swapped out of the TPM for a /dev/tpmrm0
session. The code incorrectly used PAGE_SIZE, which obviously can
vary. With these changes the buffer has a fixed size of 16 kB.
In addition, this contains support for acquiring TPM even log from
TPM2 ACPI table. This method is used by QEMU in particular"
* tag 'tpmdd-next-v5.9' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Add support for event log pointer found in TPM2 ACPI table
acpi: Extend TPM2 ACPI table with missing log fields
tpm: Unify the mismatching TPM space buffer sizes
tpm: Require that all digests are present in TCG_PCR_EVENT2 structures
High order memory stuff within trace could introduce OOM, use kvzalloc instead.
Please find the bellowing for the call stack we run across in an android system.
The scenario happens when traced_probes is woken up to get a large quantity of
trace even if free memory is even higher than watermark_low.
traced_probes invoked oom-killer: gfp_mask=0x140c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null), order=2, oom_score_adj=-1
traced_probes cpuset=system-background mems_allowed=0
CPU: 3 PID: 588 Comm: traced_probes Tainted: G W O 4.14.181 #1
Hardware name: Generic DT based system
(unwind_backtrace) from [<c010d824>] (show_stack+0x20/0x24)
(show_stack) from [<c0b2e174>] (dump_stack+0xa8/0xec)
(dump_stack) from [<c027d584>] (dump_header+0x9c/0x220)
(dump_header) from [<c027cfe4>] (oom_kill_process+0xc0/0x5c4)
(oom_kill_process) from [<c027cb94>] (out_of_memory+0x220/0x310)
(out_of_memory) from [<c02816bc>] (__alloc_pages_nodemask+0xff8/0x13a4)
(__alloc_pages_nodemask) from [<c02a6a1c>] (kmalloc_order+0x30/0x48)
(kmalloc_order) from [<c02a6a64>] (kmalloc_order_trace+0x30/0x118)
(kmalloc_order_trace) from [<c0223d7c>] (tracing_buffers_open+0x50/0xfc)
(tracing_buffers_open) from [<c02e6f58>] (do_dentry_open+0x278/0x34c)
(do_dentry_open) from [<c02e70d0>] (vfs_open+0x50/0x70)
(vfs_open) from [<c02f7c24>] (path_openat+0x5fc/0x169c)
(path_openat) from [<c02f75c4>] (do_filp_open+0x94/0xf8)
(do_filp_open) from [<c02e7650>] (do_sys_open+0x168/0x26c)
(do_sys_open) from [<c02e77bc>] (SyS_openat+0x34/0x38)
(SyS_openat) from [<c0108bc0>] (ret_fast_syscall+0x0/0x28)
Link: https://lkml.kernel.org/r/1596155265-32365-1-git-send-email-zhaoyang.huang@unisoc.com
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When we loose a device for whatever reason while (re)scanning zones, we
trip over a NULL pointer in blk_revalidate_zone_cb, like in the following
log:
sd 0:0:0:0: [sda] 3418095616 4096-byte logical blocks: (14.0 TB/12.7 TiB)
sd 0:0:0:0: [sda] 52156 zones of 65536 logical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] REPORT ZONES start lba 1065287680 failed
sd 0:0:0:0: [sda] REPORT ZONES: Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda] Sense Key : 0xb [current]
sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x6
sda: failed to revalidate zones
sd 0:0:0:0: [sda] 0 4096-byte logical blocks: (0 B/0 B)
sda: detected capacity change from 14000519643136 to 0
==================================================================
BUG: KASAN: null-ptr-deref in blk_revalidate_zone_cb+0x1b7/0x550
Write of size 8 at addr 0000000000000010 by task kworker/u4:1/58
CPU: 1 PID: 58 Comm: kworker/u4:1 Not tainted 5.8.0-rc1 #692
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Workqueue: events_unbound async_run_entry_fn
Call Trace:
dump_stack+0x7d/0xb0
? blk_revalidate_zone_cb+0x1b7/0x550
kasan_report.cold+0x5/0x37
? blk_revalidate_zone_cb+0x1b7/0x550
check_memory_region+0x145/0x1a0
blk_revalidate_zone_cb+0x1b7/0x550
sd_zbc_parse_report+0x1f1/0x370
? blk_req_zone_write_trylock+0x200/0x200
? sectors_to_logical+0x60/0x60
? blk_req_zone_write_trylock+0x200/0x200
? blk_req_zone_write_trylock+0x200/0x200
sd_zbc_report_zones+0x3c4/0x5e0
? sd_dif_config_host+0x500/0x500
blk_revalidate_disk_zones+0x231/0x44d
? _raw_write_lock_irqsave+0xb0/0xb0
? blk_queue_free_zone_bitmaps+0xd0/0xd0
sd_zbc_read_zones+0x8cf/0x11a0
sd_revalidate_disk+0x305c/0x64e0
? __device_add_disk+0x776/0xf20
? read_capacity_16.part.0+0x1080/0x1080
? blk_alloc_devt+0x250/0x250
? create_object.isra.0+0x595/0xa20
? kasan_unpoison_shadow+0x33/0x40
sd_probe+0x8dc/0xcd2
really_probe+0x20e/0xaf0
__driver_attach_async_helper+0x249/0x2d0
async_run_entry_fn+0xbe/0x560
process_one_work+0x764/0x1290
? _raw_read_unlock_irqrestore+0x30/0x30
worker_thread+0x598/0x12f0
? __kthread_parkme+0xc6/0x1b0
? schedule+0xed/0x2c0
? process_one_work+0x1290/0x1290
kthread+0x36b/0x440
? kthread_create_worker_on_cpu+0xa0/0xa0
ret_from_fork+0x22/0x30
==================================================================
When the device is already gone we end up with the following scenario:
The device's capacity is 0 and thus the number of zones will be 0 as well. When
allocating the bitmap for the conventional zones, we then trip over a NULL
pointer.
So if we encounter a zoned block device with a 0 capacity, don't dare to
revalidate the zones sizes.
Fixes: 6c6b354914 ("block: set the zone size in blk_revalidate_disk_zones atomically")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Andrii Nakryiko says:
====================
It's pretty common for applications to want to parse raw (binary) BTF data
from file, as opposed to parsing it from ELF sections. It's also pretty common
for tools to not care whether given file is ELF or raw BTF format. This patch
series exposes internal raw BTF parsing API and adds generic variant of BTF
parsing, which will efficiently determine the format of a given fail and will
parse BTF appropriately.
Patches #2 and #3 removes re-implementations of such APIs from bpftool and
resolve_btfids tools.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use generic libbpf API to parse BTF data from file, instead of re-implementing
it in bpftool.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200802013219.864880-3-andriin@fb.com
Add public APIs to parse BTF from raw data file (e.g.,
/sys/kernel/btf/vmlinux), as well as generic btf__parse(), which will try to
determine correct format, currently either raw or ELF.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200802013219.864880-2-andriin@fb.com
Lenovo ThinkStation P620 is like other TRX40 boards, is equipped with
two USB audio cards.
USB device (17aa:104d) provides functionality for Internal Speaker and
Front Headset. It's UAC v2, so it supports insertion control (jack
detection). However, when trying to get the connector status of the
speaker, an error occurs:
[ 5.787405] usb 3-1: cannot get connectors status: req = 0x81, wValue = 0x200, wIndex = 0x1000, type = 0
Since the insertion control works perfectly for the headset, the error
for speaker is probably casued by connecting internally. So let's relax
the error for a bit if it's a speaker, and always reports it's connected.
USB device (17aa:1046) is for rear Line-in, Line-out and Microphone.
The insertion control works for all three jacks. However, there's an
Function Unit that doesn't work:
[ 5.905415] usb 3-6: cannot get ctl value: req = 0x83, wValue = 0xc00, wIndex = 0x1300, type = 4
[ 5.905418] usb 3-6: 19:0: cannot get min/max values for control 12 (id 19)
So turn off the FU to avoid the error.
Also, add specific card name for both devices, so userspace can easily
indentify both cards.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200803142612.17156-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In case of btf_id does not exist, a negative error code -ENOENT
should be returned.
Fixes: c93cc69004 ("bpftool: add ability to dump BTF types")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200802111540.5384-1-tianjia.zhang@linux.alibaba.com
The '&&' command seems to have a bad effect when $(cmd_$(1)) exits with
non-zero effect: the command failure is masked (despite `set -e`) and all but
the first command of $(dep-cmd) is executed (successfully, as they are mostly
printfs), thus overall returning 0 in the end.
This means in practice that despite compilation errors, tools's build Makefile
will return success. We see this very reliably with libbpf's Makefile, which
doesn't get compilation error propagated properly. This in turns causes issues
with selftests build, as well as bpftool and other projects that rely on
building libbpf.
The fix is simple: don't use &&. Given `set -e`, we don't need to chain
commands with &&. The shell will exit on first failure, giving desired
behavior and propagating error properly.
Fixes: 275e2d9559 ("tools build: Move dependency copy into function")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20200731024244.872574-1-andriin@fb.com
Add Kishon Vijay Abraham I as MAINTAINER for TI J721E SoC PCIe.
Link: https://lore.kernel.org/r/20200722110317.4744-16-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Add J721E in pci_device_id table so that pci-epf-test can be used
for testing PCIe EP in J721E.
Link: https://lore.kernel.org/r/20200722110317.4744-15-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add support for PCIe controller in J721E SoC. The controller uses the
Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller
will work in both host mode and device mode.
Some of the features of the controller are:
*) Supports both RC mode and EP mode
*) Supports MSI and MSI-X support
*) Supports upto GEN3 speed mode
*) Supports SR-IOV capability
*) Ability to route all transactions via SMMU (support will be added
in a later patch).
Link: https://lore.kernel.org/r/20200722110317.4744-14-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
It's expected that erofs_workgroup_unfreeze_final() won't
be used in other places. Let's fold it to simplify the code.
Link: https://lore.kernel.org/r/20200729180235.25443-1-hsiangkao@redhat.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Each ondisk inode should be aligned with inode slot boundary
(32-byte alignment) because of nid calculation formula, so all
compact inodes (32 byte) cannot across page boundary. However,
extended inode is now 64-byte form, which can across page boundary
in principle if the location is specified on purpose, although
it's hard to be generated by mkfs due to the allocation policy
and rarely used by Android use case now mainly for > 4GiB files.
For now, only two fields `i_ctime_nsec` and `i_nlink' couldn't
be read from disk properly and cause out-of-bound memory read
with random value.
Let's fix now.
Fixes: 431339ba90 ("staging: erofs: add inode operations")
Cc: <stable@vger.kernel.org> # 4.19+
Link: https://lore.kernel.org/r/20200729175801.GA23973@xiangao.remote.csb
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713130944.34419-1-grandmaster@al2klimov.de
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
The biggest changes here one again come from Mormioto-san who has
continued his dilligent work cleaning up long standing issues in the
APIs, it's particularly nice to see the transition from digital_mute()
to mute_stream() finally completed. There's also been a lot of work on
the x86 code again, this time a big focus has been on cleaning up some
issues identified by various static tests, and on the Freescale systems.
Otherwise the biggest thing has been a lot of driver additions:
- Convert users of digital_mute() to mute_stream().
- Simplify I/O helper functions.
- Add a helper for getting the RTD from a substream.
- Many, many fixes and cleanups to the x86 code.
- New drivers for Freescale MQS and i.MX6sx, Intel KeemBay I2S, Maxim
MAX98360A and MAX98373 Soundwire, several Mediatek boards, nVidia
Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries boards (some
of the first phones I worked on!) and TI J721e EVM.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl8n96MTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0FApB/sFAbX/RWXiH5fBRQnGsfvLznORx9pA
90xR+BgpybawRgTk4Bi87sY5lBI44S4OwUqqI58D+/GD7uchgY2Z2m+4flF9GbDU
VTOvChqL0ZpDh2Crr2+BkSlVjZsA3h0e86W/0qoq3/q4dgb7ZfcLJ2w7A+UDq+kP
tKKqi3mTxXuM78N3Vp8/IobIRpo/fi3Oy2aB+WOiAUD6rV88yzx+QgNkvzwvTcpm
y8ejr2zYPYLHLshUh2S7HJaGyX7NjggGVaUolJtfGT+ArAP6j3JIxikC3Mr9TImd
qaX2BsHNE1XARK8KQXA5qTP7++RlewSSxblpoVRFZwV70On9/L5W4GPp
=OO0s
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.9
The biggest changes here one again come from Mormioto-san who has
continued his dilligent work cleaning up long standing issues in the
APIs, it's particularly nice to see the transition from digital_mute()
to mute_stream() finally completed. There's also been a lot of work on
the x86 code again, this time a big focus has been on cleaning up some
issues identified by various static tests, and on the Freescale systems.
Otherwise the biggest thing has been a lot of driver additions:
- Convert users of digital_mute() to mute_stream().
- Simplify I/O helper functions.
- Add a helper for getting the RTD from a substream.
- Many, many fixes and cleanups to the x86 code.
- New drivers for Freescale MQS and i.MX6sx, Intel KeemBay I2S, Maxim
MAX98360A and MAX98373 Soundwire, several Mediatek boards, nVidia
Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries boards (some
of the first phones I worked on!) and TI J721e EVM.
Pull MD fixes from Song.
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid5: Allow degraded raid6 to do rmw
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
raid5: don't duplicate code for different paths in handle_stripe
raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
md: print errno in super_written
md/raid5: remove the redundant setting of STRIPE_HANDLE
md: register new md sysfs file 'uuid' read-only
md: fix max sectors calculation for super 1.0
Minor conflict in tools/perf/arch/arm/util/auxtrace.c as one fix there
was cherry-picked for the last perf/urgent pull req to Linus, so was
already there.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Add infrastructure to allow DT irqchip platform drivers to
be built as modules
- Allow qcom-pdc, mtk-cirq and mtk-sysirq to be built as module
- Fix ACPI probing to avoid abusing function pointer casting
- Allow bcm7120-l2 and brcmstb-l2 to be used as wake-up sources
- Teach NXP's IMX INTMUX some power management
- Allow stm32-exti to be used as a hierarchical irqchip
- Let stm32-exti use the hw spinlock API in its full glory
- A couple of GICv4.1 fixes
- Tons of cleanups (mtk-sysirq, aic5, bcm7038-l1, imx-intmux,
brcmstb-l2, ativic32, ti-sci-inta, lonsoon, MIPS GIC, GICv3)
-----BEGIN PGP SIGNATURE-----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=hgPS
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Add infrastructure to allow DT irqchip platform drivers to
be built as modules
- Allow qcom-pdc, mtk-cirq and mtk-sysirq to be built as module
- Fix ACPI probing to avoid abusing function pointer casting
- Allow bcm7120-l2 and brcmstb-l2 to be used as wake-up sources
- Teach NXP's IMX INTMUX some power management
- Allow stm32-exti to be used as a hierarchical irqchip
- Let stm32-exti use the hw spinlock API in its full glory
- A couple of GICv4.1 fixes
- Tons of cleanups (mtk-sysirq, aic5, bcm7038-l1, imx-intmux,
brcmstb-l2, ativic32, ti-sci-inta, lonsoon, MIPS GIC, GICv3)
Initialising the value before using it is generally regarded as a good
idea so do that.
Fixes: 4c51f3e1e8 ("powerpc/powernv/sriov: Make single PE mode a per-BAR setting")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803075408.132601-1-oohall@gmail.com
Some of our tests use VSX or newer VMX instructions, so need to be
skipped on older CPUs to avoid SIGILL'ing.
Similarly TAR was added in v2.07, and the PMU event used in the stcx
fail test only works on Power8 or later.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803020719.96114-1-mpe@ellerman.id.au
The assembler says:
arch/powerpc/kernel/head_40x.S:623: Warning: invalid register expression
It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.
Fix it to use a literal 0, the generated code is identical.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722022422.825197-1-mpe@ellerman.id.au
The comment for function filemap_check_wb_err accidentally refers to
it as filemap_check_wb_error.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
All the LEDs in the queue are RGB, so they should not use multi for
their color.
Make sure we don't add such LED by mistake (and make it part of ABI).
Signed-off-by: Pavel Machek <pavel@ucw.cz>
In gfs2_glock_poke, make sure gfs2_holder_uninit is called on the local
glock holder. Without that, we're leaking a glock and a pid reference.
Fixes: 9e8990dea9 ("gfs2: Smarter iopen glock waiting")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Multicolor is a bit too abstract. Yes, we can have
Green-Magenta-Ultraviolet LED, but so far all the LEDs we support are
RGB, and not even RGB-White or RGB-Yellow variants emerged.
Multicolor is not a good fit for RGB LED. It does not really know
about LED color. In particular, there's no way to make LED "white".
Userspace is interested in knowing "this LED can produce arbitrary
color", which not all multicolor LEDs can.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Pass a pointer to the existing glock holder from
gfs2_file_{read,write}_iter to gfs2_file_direct_{read,write}
to save some stack space.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, three flags were not represented in the glock output.
This patch adds them in:
c - GLF_INODE_CREATING
P - GLF_PENDING_DELETE
x - GLF_FREEING (both f and F are already used)
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
* pm-sleep:
PM: sleep: spread "const char *" correctness
PM: hibernate: fix white space in a few places
freezer: Add unsafe version of freezable_schedule_timeout_interruptible() for NFS
PM: sleep: core: Emit changed uevent on wakeup_sysfs_add/remove
* pm-domains:
PM: domains: Restore comment indentation for generic_pm_domain.child_links
PM: domains: Fix up terminology with parent/child
* powercap:
powercap: Add Power Limit4 support
powercap: idle_inject: Replace play_idle() with play_idle_precise() in comments
powercap: intel_rapl: add support for Sapphire Rapids
* pm-tools:
pm-graph v5.7 - important s2idle fixes
cpupower: Replace HTTP links with HTTPS ones
cpupower: Fix NULL but dereferenced coccicheck errors
cpupower: Fix comparing pointer to 0 coccicheck warns
* pm-cpufreq: (24 commits)
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported
cpufreq: intel_pstate: Clean up aperf_mperf_shift description
cpufreq: powernv: Make some symbols static
cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused
cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift()
cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused
cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused
cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues
cpufreq: pasemi: Include header file for {check,restore}_astate prototypes
cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block
cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status
cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks
cpufreq: Replace HTTP links with HTTPS ones
cpufreq: intel_pstate: Fix static checker warning for epp variable
cpufreq: Remove the weakly defined cpufreq_default_governor()
cpufreq: Specify default governor on command line
...
* pm-cpuidle:
cpuidle: ACPI: fix 'return' with no value build warning
intel_idle: Customize IceLake server support
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
cpuidle: psci: Split into two separate build objects
intel_idle: Eliminate redundant static variable
* pm-em:
OPP: refactor dev_pm_opp_of_register_em() and update related drivers
Documentation: power: update Energy Model description
PM / EM: change name of em_pd_energy to em_cpu_energy
PM / EM: remove em_register_perf_domain
PM / EM: add support for other devices than CPUs in Energy Model
PM / EM: update callback structure and add device pointer
PM / EM: introduce em_dev_register_perf_domain function
PM / EM: change naming convention from 'capacity' to 'performance'
* pm-core:
mmc: jz4740: Use pm_ptr() macro
PM: Make *_DEV_PM_OPS macros use __maybe_unused
PM: core: introduce pm_ptr() macro
mac80211.h says: Beacon filter support is advertised with the
IEEE80211_VIF_BEACON_FILTER interface capability. The driver needs to
enable beacon filter support whenever power save is enabled, that is
IEEE80211_CONF_PS is set. When power save is enabled, the stack will
not check for beacon loss and the driver needs to notify about loss
of beacons with ieee80211_beacon_loss().
Some controllers may want to dynamically enable the beacon filter
capabilities on power save entry (CONF_PS) and disable it on exit.
This is the case for the wcn36xx driver which only supports beacon
filtering in PS mode (no CONNECTION_MONITOR support).
When the mac80211 beacon monitor timer expires, the beacon filter
flag must be checked again in case it as been changed in between
(e.g. vif moved to PS mode).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1592471863-31402-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
