Commit Graph

2490 Commits

Author SHA1 Message Date
Aneesh Kumar K.V
103a8542cb powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
If the hypervisor doesn't support hugepages, the kernel ends up allocating a large
number of page table pages. The early page table allocation was wrongly
setting the max memblock limit to ppc64_rma_size with radix translation
which resulted in boot failure as shown below.

Kernel panic - not syncing:
early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff
 CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2
 Call Trace:
 [c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable)
 [c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418
 [c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec
 [c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4
 [c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c
 [c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170

This was because the kernel was checking for the radix feature before we enable the
feature via mmu_features. This resulted in the kernel using hash restrictions on
radix.

Rework the early init code such that the kernel boot with memblock restrictions
as imposed by hash. At that point, the kernel still hasn't finalized the
translation the kernel will end up using.

We have three different ways of detecting radix.

1. dt_cpu_ftrs_scan -> used only in case of PowerNV
2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan
3. CAS -> Where we negotiate with hypervisor about the supported translation.

We look at 1 or 2 early in the boot and after that, we look at the CAS vector to
finalize the translation the kernel will use. We also support a kernel command
line option (disable_radix) to switch to hash.

Update the memblock limit after mmu_early_init_devtree() if the kernel is going
to use radix translation. This forces some of the memblock allocations we do before
mmu_early_init_devtree() to be within the RMA limit.

Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Reported-by: Shirisha Ganta <shiganta@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200828100852.426575-1-aneesh.kumar@linux.ibm.com
2020-08-28 20:14:45 +10:00
Shawn Anastasio
12564485ed Revert "powerpc/64s: Remove PROT_SAO support"
This reverts commit 5c9fa16e8a.

Since PROT_SAO can still be useful for certain classes of software,
reintroduce it. Concerns about guest migration for LPARs using SAO
will be addressed next.

Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io
2020-08-24 14:12:53 +10:00
Christophe Leroy
541cebb51f powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
In is_module_segment(), when VMALLOC_END is over 0xf0000000,
ALIGN(VMALLOC_END, SZ_256M) has value 0.

In that case, addr >= ALIGN(VMALLOC_END, SZ_256M) is always
true then is_module_segment() always returns false.

Use (ALIGN(VMALLOC_END, SZ_256M) - 1) which will have
value 0xffffffff and will be suitable for the comparison.

Fixes: c496433197 ("powerpc/32s: Only leave NX unset on segments used for modules")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/09fc73fe9c7423c6b4cf93f93df9bb0ed8eefab5.1597994047.git.christophe.leroy@csgroup.eu
2020-08-21 23:30:25 +10:00
Christophe Leroy
7bee31ad8e powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
When MODULES_VADDR is defined, is_module_segment() shall check the
address against it instead of checking agains VMALLOC_START.

Fixes: 6ca055322d ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/07884ed033c31e074747b7eb8eaa329d15db07ec.1596641219.git.christophe.leroy@csgroup.eu
2020-08-18 13:40:15 +10:00
Aneesh Kumar K.V
1e4e4bcaf7 powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
IS_ENABLED() instead of #ifdef still requires variable declaration.
In this specific case, default_uamor is declared in asm/pkeys.h which
is only included if PPC_MEM_KEYS is enabled.

arch/powerpc/mm/book3s64/hash_utils.c: In function ‘hash__early_init_mmu_secondary’:
arch/powerpc/mm/book3s64/hash_utils.c:1119:21: error: ‘default_uamor’ undeclared (first use in this function)
 1119 |   mtspr(SPRN_UAMOR, default_uamor);
      |                     ^~~~~~~~~~~~~

Fixes: 6553fb799f ("powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200817103301.158836-1-aneesh.kumar@linux.ibm.com
2020-08-17 23:33:00 +10:00
Linus Torvalds
7fca4dee61 powerpc fixes for 5.9 #2
One fix for a boot crash on some platforms introduced by the recent pkey
 refactoring.
 
 Thanks to:
   Christian Zigotzky, Aneesh Kumar K.V.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl82hVUTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgI5GEACaEJDAJimcb7zqMJ7dQZR1hr5CoU50
 r7LIa0BTDDwP4gTfj+CrCp3XCZvTHeYFoYKMgQ2TU9qW/viF6DrXAoufLPQ8Ftyf
 sFSHvA7olz1ztPwAVLM4HkF61BsMCvrqMCRoDe3NRTWyLD7Ufs4dtiV1GtrjMSZt
 vQtXs0OWXhNas9hPnt4GR9ZgTSQQxp/VsgiwkhpLsW8dVUXQ12kcHjjKgD6qmXy3
 LXdK5NNvHKZ632shwIHHOp0gMd016AqwZAIKGtSD7A8ZRRVMX8StQw8W+pPKRCSA
 dksHtOUrM4reDx7B00Ce84rNkr2r+gOSzzOyIhnhcMbxhLj6lyb4PkXsCS1D+lB0
 c0IbAti7IJaPOIDVG+sjpMR7IetyAtGLRioLMeOcyQmd+C27DEy/NbUzl1yJF8LK
 htR0XvJNmBgJ3QPhyWw3NpcdLMYsnGZ6rJdHp0XnrXn9ngR1zb8xQU8BdaP/DtKd
 xeAwNBeiQ7EPeEWv67KXJUJYsEKSKSjZNdUyY6W8m9/qwOHrUrvbBnYzuVD1e4eE
 ELB1GF5DO10EeYdqFEhhnGUJIwjA7M3SU30LI5DO9x8ikiMCRoI0vLgT4eWU+aTe
 aRVYfQ750ZlYEGvDhvWKlpcvgRcdtT2rgnqrysyjkJ9bf24/prXa0MSfhwvPipXA
 A4gY681C1/2IOA==
 =d4vU
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
 "One fix for a boot crash on some platforms introduced by the recent
  pkey refactoring.

  Thanks to Christian Zigotzky and Aneesh Kumar K.V"

* tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)
2020-08-14 13:40:27 -07:00
Peter Xu
a2beb5f1ef mm: clean up the last pieces of page fault accountings
Here're the last pieces of page fault accounting that were still done
outside handle_mm_fault() where we still have regs==NULL when calling
handle_mm_fault():

arch/powerpc/mm/copro_fault.c:   copro_handle_mm_fault
arch/sparc/mm/fault_32.c:        force_user_fault
arch/um/kernel/trap.c:           handle_page_fault
mm/gup.c:                        faultin_page
                                 fixup_user_fault
mm/hmm.c:                        hmm_vma_fault
mm/ksm.c:                        break_ksm

Some of them has the issue of duplicated accounting for page fault
retries.  Some of them didn't do the accounting at all.

This patch cleans all these up by letting handle_mm_fault() to do per-task
page fault accounting even if regs==NULL (though we'll still skip the perf
event accountings).  With that, we can safely remove all the outliers now.

There's another functional change in that now we account the page faults
to the caller of gup, rather than the task_struct that passed into the gup
code.  More information of this can be found at [1].

After this patch, below things should never be touched again outside
handle_mm_fault():

  - task_struct.[maj|min]_flt
  - PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]

[1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-25-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:04 -07:00
Peter Xu
428fdc0944 mm/powerpc: use general page fault accounting
Use the general page fault accounting by passing regs into
handle_mm_fault().

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200707225021.200906-17-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:03 -07:00
Peter Xu
bce617edec mm: do page fault accounting in handle_mm_fault
Patch series "mm: Page fault accounting cleanups", v5.

This is v5 of the pf accounting cleanup series.  It originates from Gerald
Schaefer's report on an issue a week ago regarding to incorrect page fault
accountings for retried page fault after commit 4064b98270 ("mm: allow
VM_FAULT_RETRY for multiple times"):

  https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/

What this series did:

  - Correct page fault accounting: we do accounting for a page fault
    (no matter whether it's from #PF handling, or gup, or anything else)
    only with the one that completed the fault.  For example, page fault
    retries should not be counted in page fault counters.  Same to the
    perf events.

  - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf
    event is used in an adhoc way across different archs.

    Case (1): for many archs it's done at the entry of a page fault
    handler, so that it will also cover e.g.  errornous faults.

    Case (2): for some other archs, it is only accounted when the page
    fault is resolved successfully.

    Case (3): there're still quite some archs that have not enabled
    this perf event.

    Since this series will touch merely all the archs, we unify this
    perf event to always follow case (1), which is the one that makes most
    sense.  And since we moved the accounting into handle_mm_fault, the
    other two MAJ/MIN perf events are well taken care of naturally.

  - Unify definition of "major faults": the definition of "major
    fault" is slightly changed when used in accounting (not
    VM_FAULT_MAJOR).  More information in patch 1.

  - Always account the page fault onto the one that triggered the page
    fault.  This does not matter much for #PF handlings, but mostly for
    gup.  More information on this in patch 25.

Patchset layout:

Patch 1:     Introduced the accounting in handle_mm_fault(), not enabled.
Patch 2-23:  Enable the new accounting for arch #PF handlers one by one.
Patch 24:    Enable the new accounting for the rest outliers (gup, iommu, etc.)
Patch 25:    Cleanup GUP task_struct pointer since it's not needed any more

This patch (of 25):

This is a preparation patch to move page fault accountings into the
general code in handle_mm_fault().  This includes both the per task
flt_maj/flt_min counters, and the major/minor page fault perf events.  To
do this, the pt_regs pointer is passed into handle_mm_fault().

PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault
handlers.

So far, all the pt_regs pointer that passed into handle_mm_fault() is
NULL, which means this patch should have no intented functional change.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com
Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:02 -07:00
Aneesh Kumar K.V
6553fb799f powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)
On p6 and before we should avoid updating UAMOR SPRN. This resulted
in boot failure on Nemo board.

Fixes: 269e829f48 ("powerpc/book3s64/pkey: Disable pkey on POWER6 and before")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810102623.685083-1-aneesh.kumar@linux.ibm.com
2020-08-10 23:07:21 +10:00
Linus Torvalds
81e11336d9 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - a few MM hotfixes

 - kthread, tools, scripts, ntfs and ocfs2

 - some of MM

Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
  mm: vmscan: consistent update to pgrefill
  mm/vmscan.c: fix typo
  khugepaged: khugepaged_test_exit() check mmget_still_valid()
  khugepaged: retract_page_tables() remember to test exit
  khugepaged: collapse_pte_mapped_thp() protect the pmd lock
  khugepaged: collapse_pte_mapped_thp() flush the right range
  mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
  mm: thp: replace HTTP links with HTTPS ones
  mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
  mm/page_alloc.c: skip setting nodemask when we are in interrupt
  mm/page_alloc: fallbacks at most has 3 elements
  mm/page_alloc: silence a KASAN false positive
  mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
  mm/page_alloc.c: simplify pageblock bitmap access
  mm/page_alloc.c: extract the common part in pfn_to_bitidx()
  mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
  mm/shuffle: remove dynamic reconfiguration
  mm/memory_hotplug: document why shuffle_zone() is relevant
  mm/page_alloc: remove nr_free_pagecache_pages()
  mm: remove vm_total_pages
  ...
2020-08-07 11:39:33 -07:00
Mike Rapoport
c89ab04feb mm/sparse: cleanup the code surrounding memory_present()
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent
functions that call memory_present() for each region in memblock.memory:
sparse_memory_present_with_active_regions() and membocks_present().

Moreover, all architectures have a call to either of these functions
preceding the call to sparse_init() and in the most cases they are called
one after the other.

Mark the regions from memblock.memory as present during sparce_init() by
making sparse_init() call memblocks_present(), make memblocks_present()
and memory_present() functions static and remove redundant
sparse_memory_present_with_active_regions() function.

Also remove no longer required HAVE_MEMORY_PRESENT configuration option.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:27 -07:00
Anshuman Khandual
56993b4e14 mm/sparsemem: enable vmem_altmap support in vmemmap_alloc_block_buf()
There are many instances where vmemap allocation is often switched between
regular memory and device memory just based on whether altmap is available
or not.  vmemmap_alloc_block_buf() is used in various platforms to
allocate vmemmap mappings.  Lets also enable it to handle altmap based
device memory allocation along with existing regular memory allocations.
This will help in avoiding the altmap based allocation switch in many
places.  To summarize there are two different methods to call
vmemmap_alloc_block_buf().

vmemmap_alloc_block_buf(size, node, NULL)   /* Allocate from system RAM */
vmemmap_alloc_block_buf(size, node, altmap) /* Allocate from altmap */

This converts altmap_alloc_block_buf() into a static function, drops it's
entry from the header and updates Documentation/vm/memory-model.rst.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jia He <justin.he@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Link: http://lkml.kernel.org/r/1594004178-8861-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:27 -07:00
Mike Rapoport
ca15ca406f mm: remove unneeded includes of <asm/pgalloc.h>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"

Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table.  These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.

In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>

In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.

This patch (of 8):

In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory.  Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.

As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.

The process was somewhat automated using

	sed -i -E '/[<"]asm\/pgalloc\.h/d' \
                $(grep -L -w -f /tmp/xx \
                        $(git grep -E -l '[<"]asm/pgalloc\.h'))

where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.

[rppt@linux.ibm.com: fix powerpc warning]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Linus Torvalds
25d8d4eeca powerpc updates for 5.9
- Add support for (optionally) using queued spinlocks & rwlocks.
 
  - Support for a new faster system call ABI using the scv instruction on Power9
    or later.
 
  - Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
    Power10 and future processors, leaving us with no way to implement the
    functionality it requests. This risks breaking userspace, though we believe
    it is unused in practice.
 
  - A bug fix for, and then the removal of, our custom stack expansion checking.
    We now allow stack expansion up to the rlimit, like other architectures.
 
  - Remove the remnants of our (previously disabled) topology update code, which
    tried to react to NUMA layout changes on virtualised systems, but was prone
    to crashes and other problems.
 
  - Add PMU support for Power10 CPUs.
 
  - A change to our signal trampoline so that we don't unbalance the link stack
    (branch return predictor) in the signal delivery path.
 
  - Lots of other cleanups, refactorings, smaller features and so on as usual.
 
 Thanks to:
   Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
   Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
   Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
   Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
   Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
   Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
   Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
   Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
   Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
   RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
   Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
   Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
   O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
   Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
   Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
   Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
   Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
   Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
   YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl8tOxATHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgDQfEAClXHWf6hnxB84bEu39D51NkVotL1IG
 BRWFvyix+xHuUkHIouBPAAMl6ngY5X6wkYd+Z+CY9zHNtdSDoVlJE30YXdMQA/dE
 L/rYxR1884yGR/uU/3wusboO68ReXwcKQPmKOymUfh0zH7ujyJsSWLpXFK1YDC5d
 2TVVTi0Q+P5ucMHDh0L+AHirIxZvtZSp43+J7xLtywsj+XAxJWCTGo5WCJbdgbCA
 Qbv3aOkVyUa3EgsbdM/STPpv82ebqT+PHxeSIO4Jw6ZODtKRH0R5YsWCApuY9eZ+
 ebY9RLmgv9ZAhJqB2fv9A5NDcMoGpZNmjM7HrWpXwULKQpkBGHCzJ9FcSdHVMOx8
 nbVMFjt4uzLwV1w8lFYslQ2tNH/uH2o9BlryV1RLpiiKokDAJO/NOsWN9y0u/I4J
 EmAM5DSX2LgVvvas96IlGK8KX4xkOkf8FLX/H5UDvvAfloH8J4CZXk/CWCab/nqY
 KEHPnMmYvQZ1w9SzyZg9sO/1p6Bl1Gmm75Jv2F1lBiRW/42VcGBI/qLsJ4lC59Fc
 KbwufYNYYG38wbxDLW1HAPJhRonxIcaZj3EEqk7aTiLZ55nNbu8e2k32CpNXTGqt
 npOhzJHimcq7L6+878ZW+xpbZwogIEUdRSsmwb6aT8za3ShnYwSA2Q3LYxh9xyGH
 j3GifvPq6Efp3Q==
 =QMY1
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Add support for (optionally) using queued spinlocks & rwlocks.

 - Support for a new faster system call ABI using the scv instruction on
   Power9 or later.

 - Drop support for the PROT_SAO mmap/mprotect flag as it will be
   unsupported on Power10 and future processors, leaving us with no way
   to implement the functionality it requests. This risks breaking
   userspace, though we believe it is unused in practice.

 - A bug fix for, and then the removal of, our custom stack expansion
   checking. We now allow stack expansion up to the rlimit, like other
   architectures.

 - Remove the remnants of our (previously disabled) topology update
   code, which tried to react to NUMA layout changes on virtualised
   systems, but was prone to crashes and other problems.

 - Add PMU support for Power10 CPUs.

 - A change to our signal trampoline so that we don't unbalance the link
   stack (branch return predictor) in the signal delivery path.

 - Lots of other cleanups, refactorings, smaller features and so on as
   usual.

Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.

* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
  selftests/powerpc: Fix pkey syscall redefinitions
  powerpc: Fix circular dependency between percpu.h and mmu.h
  powerpc/powernv/sriov: Fix use of uninitialised variable
  selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
  powerpc/40x: Fix assembler warning about r0
  powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
  powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
  cpuidle: pseries: Fixup exit latency for CEDE(0)
  cpuidle: pseries: Add function to parse extended CEDE records
  cpuidle: pseries: Set the latency-hint before entering CEDE
  selftests/powerpc: Fix online CPU selection
  powerpc/perf: Consolidate perf_callchain_user_[64|32]()
  powerpc/pseries/hotplug-cpu: Remove double free in error path
  powerpc/pseries/mobility: Add pr_debug() for device tree changes
  powerpc/pseries/mobility: Set pr_fmt()
  powerpc/cacheinfo: Warn if cache object chain becomes unordered
  powerpc/cacheinfo: Improve diagnostics about malformed cache lists
  powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
  powerpc/cacheinfo: Set pr_fmt()
  powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
  ...
2020-08-07 10:33:50 -07:00
Vladis Dronov
aff779515a powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
Certain warnings are emitted for powerpc code when building with a gcc-10
toolset:

    WARNING: modpost: vmlinux.o(.text.unlikely+0x377c): Section mismatch in
    reference from the function remove_pmd_table() to the function
    .meminit.text:split_kernel_mapping()
    The function remove_pmd_table() references
    the function __meminit split_kernel_mapping().
    This is often because remove_pmd_table lacks a __meminit
    annotation or the annotation of split_kernel_mapping is wrong.

Add the appropriate __init and __meminit annotations to make modpost not
complain. In all the cases there are just a single callsite from another
__init or __meminit function:

__meminit remove_pagetable() -> remove_pud_table() -> remove_pmd_table()
__init prom_init() -> setup_secure_guest()
__init xive_spapr_init() -> xive_spapr_disabled()

Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200729133741.62789-1-vdronov@redhat.com
2020-07-30 10:50:07 +10:00
Hari Bathini
adfefc609e powerpc/drmem: Make LMB walk a bit more flexible
Currently, numa & prom are the only users of drmem LMB walk code.
Loading kdump with kexec_file also needs to walk the drmem LMBs to
setup the usable memory ranges for kdump kernel. But there are couple
of issues in using the code as is. One, walk_drmem_lmb() code is built
into the .init section currently, while kexec_file needs it later.
Two, there is no scope to pass data to the callback function for
processing and/or erroring out on certain conditions.

Fix that by, moving drmem LMB walk code out of .init section, adding
scope to pass data to the callback function and bailing out when an
error is encountered in the callback function.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602282727.575379.3979857013827701828.stgit@hbathini
2020-07-29 23:47:54 +10:00
Aneesh Kumar K.V
bf6b7661f4 powerpc/book3s64/radix: Add kernel command line option to disable radix GTSE
This adds a kernel command line option that can be used to disable GTSE support.
Disabling GTSE implies kernel will make hcalls to invalidate TLB entries.

This was done so that we can do VM migration between configs that enable/disable
GTSE support via hypervisor. To migrate a VM from a system that supports
GTSE to a system that doesn't, we can boot the guest with
radix_hcall_invalidate=on, thereby forcing the guest to use hcalls for TLB
invalidates.

The check for hcall availability is done in pSeries_setup_arch so that
the panic message appears on the console. This should only happen on
a hypervisor that doesn't force the guest to hash translation even
though it can't handle the radix GTSE=0 request via CAS. With
radix_hcall_invalidate=on if the hypervisor doesn't support hcall_rpt_invalidate
hcall it should force the LPAR to hash translation.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727085908.420806-1-aneesh.kumar@linux.ibm.com
2020-07-29 21:09:37 +10:00
Aneesh Kumar K.V
ef26b76d1a powerpc/hugetlb/cma: Allocate gigantic hugetlb pages using CMA
commit: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
added support for allocating gigantic hugepages using CMA. This patch
enables the same for powerpc

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713150749.25245-1-aneesh.kumar@linux.ibm.com
2020-07-29 21:09:37 +10:00
Michael Ellerman
07e571ea59 powerpc/64e: Drop dead BOOK3E_MMU_TLB_STATS code
This code was merged 11 years ago in commit 13363ab9b9 ("powerpc:
Add definitions used by exception handling on 64-bit Book3E") but was
never able to be built because CONFIG_BOOK3E_MMU_TLB_STATS never
existed. Remove it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-4-mpe@ellerman.id.au
2020-07-29 21:08:12 +10:00
Bharata B Rao
55548a86eb powerpc/mm: Limit resize_hpt_for_hotplug() call to hash guests only
During memory hotplug and unplug, resize_hpt_for_hotplug() gets called
for both hash and radix guests but it should be called only for hash
guests. Though the call does nothing in the radix guest case, it is
cleaner to push this call into hash specific memory hotplug routines.

Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727095704.1432916-1-bharata@linux.ibm.com
2020-07-29 21:02:12 +10:00
Michael Ellerman
773b3e53df powerpc/mm: Remove custom stack expansion checking
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.

The logic aims to prevent userspace from doing bad accesses below the
stack pointer. However as long as the stack is < 1MB in size, we allow
all accesses without further checks. Adding some debug I see that I
can do a full kernel build and LTP run, and not a single process has
used more than 1MB of stack. So for the majority of processes the
logic never even fires.

We also recently found a nasty bug in this code which could cause
userspace programs to be killed during signal delivery. It went
unnoticed presumably because most processes use < 1MB of stack.

The generic mm code has also grown support for stack guard pages since
this code was originally written, so the most heinous case of the
stack expanding into other mappings is now handled for us.

Finally although some other arches have special logic in this path,
from what I can tell none of x86, arm64, arm and s390 impose any extra
checks other than those in expand_stack().

So drop our complicated logic and like other architectures just let
the stack expand as long as its within the rlimit.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20200724092528.1578671-4-mpe@ellerman.id.au
2020-07-29 21:02:12 +10:00
Michael Ellerman
63dee5df43 powerpc: Allow 4224 bytes of stack expansion for the signal frame
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.

The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.

The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.

Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.

The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).

The 2048 byte allowance was correct until 2008 as the signal frame
was:

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1440 */
        /* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
        long unsigned int          _unused[2];           /*  1440    16 */
        unsigned int               tramp[6];             /*  1456    24 */
        struct siginfo *           pinfo;                /*  1480     8 */
        void *                     puc;                  /*  1488     8 */
        struct siginfo     info;                         /*  1496   128 */
        /* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
        char                       abigap[288];          /*  1624   288 */

        /* size: 1920, cachelines: 15, members: 7 */
        /* padding: 8 */
};

1920 + 128 = 2048

Then in commit ce48b21007 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1696 */	<--
        /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
        long unsigned int          _unused[2];           /*  1696    16 */
        unsigned int               tramp[6];             /*  1712    24 */
        struct siginfo *           pinfo;                /*  1736     8 */
        void *                     puc;                  /*  1744     8 */
        struct siginfo     info;                         /*  1752   128 */
        /* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
        char                       abigap[288];          /*  1880   288 */

        /* size: 2176, cachelines: 17, members: 7 */
        /* padding: 8 */
};

2176 + 128 = 2304

At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.

Then in 2010 commit 320b2b8de1 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.

That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1696 */
        /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
        struct ucontext    uc_transact;                  /*  1696  1696 */	<--
        /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
        long unsigned int          _unused[2];           /*  3392    16 */
        unsigned int               tramp[6];             /*  3408    24 */
        struct siginfo *           pinfo;                /*  3432     8 */
        void *                     puc;                  /*  3440     8 */
        struct siginfo     info;                         /*  3448   128 */
        /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
        char                       abigap[288];          /*  3576   288 */

        /* size: 3872, cachelines: 31, members: 8 */
        /* padding: 8 */
        /* last cacheline: 32 bytes */
};

3872 + 128 = 4000

And commit 573ebfa660 ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1696 */
        /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
        struct ucontext    uc_transact;                  /*  1696  1696 */
        /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
        long unsigned int          _unused[2];           /*  3392    16 */
        unsigned int               tramp[6];             /*  3408    24 */
        struct siginfo *           pinfo;                /*  3432     8 */
        void *                     puc;                  /*  3440     8 */
        struct siginfo     info;                         /*  3448   128 */
        /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
        char                       abigap[512];          /*  3576   512 */	<--

        /* size: 4096, cachelines: 32, members: 8 */
        /* padding: 8 */
};

4096 + 128 = 4224

Then finally in 2017, commit 1be7107fbe ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.

Fix it by increasing the allowance to 4224 bytes.

Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.

Fixes: ce48b21007 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
2020-07-29 21:02:12 +10:00
Nicholas Piggin
909adfc66b powerpc/64s/hash: Fix hash_preload running with interrupts enabled
Commit 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the
caller") removed the local_irq_disable from hash_preload, but it was
required for more than just the page table walk: the hash pte busy bit is
effectively a lock which may be taken in interrupt context, and the local
update flag test must not be preempted before it's used.

This solves apparent lockups with perf interrupting __hash_page_64K. If
get_perf_callchain then also takes a hash fault on the same page while it
is already locked, it will loop forever taking hash faults, which looks like
this:

  cpu 0x49e: Vector: 100 (System Reset) at [c00000001a4f7d70]
      pc: c000000000072dc8: hash_page_mm+0x8/0x800
      lr: c00000000000c5a4: do_hash_page+0x24/0x38
      sp: c0002ac1cc69ac70
     msr: 8000000000081033
    current = 0xc0002ac1cc602e00
    paca    = 0xc00000001de1f280   irqmask: 0x03   irq_happened: 0x01
      pid   = 20118, comm = pread2_processe
  Linux version 5.8.0-rc6-00345-g1fad14f18bc6
  49e:mon> t
  [c0002ac1cc69ac70] c00000000000c5a4 do_hash_page+0x24/0x38 (unreliable)
  --- Exception: 300 (Data Access) at c00000000008fa60 __copy_tofrom_user_power7+0x20c/0x7ac
  [link register   ] c000000000335d10 copy_from_user_nofault+0xf0/0x150
  [c0002ac1cc69af70] c00032bf9fa3c880 (unreliable)
  [c0002ac1cc69afa0] c000000000109df0 read_user_stack_64+0x70/0xf0
  [c0002ac1cc69afd0] c000000000109fcc perf_callchain_user_64+0x15c/0x410
  [c0002ac1cc69b060] c000000000109c00 perf_callchain_user+0x20/0x40
  [c0002ac1cc69b080] c00000000031c6cc get_perf_callchain+0x25c/0x360
  [c0002ac1cc69b120] c000000000316b50 perf_callchain+0x70/0xa0
  [c0002ac1cc69b140] c000000000316ddc perf_prepare_sample+0x25c/0x790
  [c0002ac1cc69b1a0] c000000000317350 perf_event_output_forward+0x40/0xb0
  [c0002ac1cc69b220] c000000000306138 __perf_event_overflow+0x88/0x1a0
  [c0002ac1cc69b270] c00000000010cf70 record_and_restart+0x230/0x750
  [c0002ac1cc69b620] c00000000010d69c perf_event_interrupt+0x20c/0x510
  [c0002ac1cc69b730] c000000000027d9c performance_monitor_exception+0x4c/0x60
  [c0002ac1cc69b750] c00000000000b2f8 performance_monitor_common_virt+0x1b8/0x1c0
  --- Exception: f00 (Performance Monitor) at c0000000000cb5b0 pSeries_lpar_hpte_insert+0x0/0x160
  [link register   ] c0000000000846f0 __hash_page_64K+0x210/0x540
  [c0002ac1cc69ba50] 0000000000000000 (unreliable)
  [c0002ac1cc69bb00] c000000000073ae0 update_mmu_cache+0x390/0x3a0
  [c0002ac1cc69bb70] c00000000037f024 wp_page_copy+0x364/0xce0
  [c0002ac1cc69bc20] c00000000038272c do_wp_page+0xdc/0xa60
  [c0002ac1cc69bc70] c0000000003857bc handle_mm_fault+0xb9c/0x1b60
  [c0002ac1cc69bd50] c00000000006c434 __do_page_fault+0x314/0xc90
  [c0002ac1cc69be20] c00000000000c5c8 handle_page_fault+0x10/0x2c
  --- Exception: 300 (Data Access) at 00007fff8c861fe8
  SP (7ffff6b19660) is in userspace

Fixes: 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the caller")
Reported-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reported-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727060947.10060-1-npiggin@gmail.com
2020-07-27 17:02:09 +10:00
Christophe Leroy
e54e30bca4 powerpc/ptdump: Refactor update of pg_state
In note_page(), the pg_state is updated the same way in two places.

Add note_page_update_state() to do it.

Also include the display of boundary markers there as it is missing
"no level" leg, leading to a mismatch when the first two markers
are at the same address and the first displayed area uses that
address.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a284a809f01c705bbaab303b06fda216f147a99a.1593429426.git.christophe.leroy@csgroup.eu
2020-07-27 00:01:31 +10:00
Christophe Leroy
846feeace5 powerpc/ptdump: Refactor update of st->last_pa
st->last_pa is always updated in note_page() so it can
be done outside the if/elseif/else block.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/610d6b1a60ad0bedef865a90153c1110cfaa507e.1593429426.git.christophe.leroy@csgroup.eu
2020-07-27 00:01:30 +10:00
Christophe Leroy
6ca055322d powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX
When STRICT_KERNEL_RWX is set, we want to set NX bit on vmalloc
segments. But modules require exec.

Use a dedicated segment for modules. There is not much space
above kernel, and we don't waste vmalloc space to do alignment.
Therefore, we take the segment before PAGE_OFFSET for modules.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eb8faba9148b6cf17c696ba776b4e8ee2f6313bf.1593428200.git.christophe.leroy@csgroup.eu
2020-07-27 00:01:30 +10:00
Christophe Leroy
f1a1f7a15e powerpc/32s: Kernel space starts at TASK_SIZE
Kernel space starts at TASK_SIZE. Select kernel page table
when address is over TASK_SIZE.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/893425e32cd0a003539573b2d115e0ffa98bc26c.1593428200.git.christophe.leroy@csgroup.eu
2020-07-27 00:01:30 +10:00
Christophe Leroy
b6be1bb7f7 powerpc/32: Set user/kernel boundary at TASK_SIZE instead of PAGE_OFFSET
User space stops at TASK_SIZE. At the moment, kernel space starts
at PAGE_OFFSET.

In order to use space between TASK_SIZE and PAGE_OFFSET for modules,
make TASK_SIZE the limit between user and kernel space.

Note that fault.c already considers TASK_SIZE as the boundary between
user and kernel space.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b38b52cd8dabbb56fbd6f9219d6f3cdccbb43b44.1593428200.git.christophe.leroy@csgroup.eu
2020-07-27 00:01:30 +10:00
Christophe Leroy
c496433197 powerpc/32s: Only leave NX unset on segments used for modules
Instead of leaving NX unset on all segments above the start
of vmalloc space, only leave NX unset on segments used for
modules.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7172c0f5253419315e434a1816ee3d6ed6505bc0.1593428200.git.christophe.leroy@csgroup.eu
2020-07-27 00:01:30 +10:00
Christophe Leroy
7fbc22ce29 powerpc: Use MODULES_VADDR if defined
In order to allow allocation of modules outside of vmalloc space,
use MODULES_VADDR and MODULES_END when MODULES_VADDR is defined.

Redefine module_alloc() when MODULES_VADDR defined.
Unmap corresponding KASAN shadow memory.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7ecf5fff1eef67d450e73fc412b6ec3818483d75.1593428200.git.christophe.leroy@csgroup.eu
2020-07-27 00:01:30 +10:00
Srikar Dronamraju
dbce456280 powerpc/numa: Limit possible nodes to within num_possible_nodes
MAX_NUMNODES is a theoretical maximum number of nodes thats is
supported by the kernel. Device tree properties exposes the number of
possible nodes on the current platform. The kernel would detected this
and would use it for most of its resource allocations. If the platform
now increases the nodes to over what was already exposed, then it may
lead to inconsistencies. Hence limit it to the already exposed nodes.

Suggested-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724105809.24733-1-srikar@linux.vnet.ibm.com
2020-07-26 23:34:25 +10:00
Aneesh Kumar K.V
269e829f48 powerpc/book3s64/pkey: Disable pkey on POWER6 and before
POWER6 only supports AMR update via privileged mode (MSR[PR] = 0,
SPRN_AMR=29) The PR=1 (userspace) alias for that SPR (SPRN_AMR=13) was
only supported from POWER7. Since we don't allow userspace modifying
of AMR value we should disable pkey support on P6 and before.

The hypervisor will still report pkey support via
"ibm,processor-storage-keys". Hence also check for P7 CPU_FTR bit to
decide on pkey support.

Fixes: f491fe3fb4 ("powerpc/book3s64/pkeys: Simplify the key initialization")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726132517.399076-1-aneesh.kumar@linux.ibm.com
2020-07-26 23:34:18 +10:00
Santosh Sivaraj
69507b984d powerpc/mm/hash64: Remove comment that is no longer valid
hash_low_64.S was removed in commit a43c0eb836 ("powerpc/mm: Convert
4k insert from asm to C") and flush_hash_page() is no longer called
from any assembly routine.

Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
[mpe: Tweak comment wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721091915.205006-1-santosh@fossix.org
2020-07-23 17:43:35 +10:00
Nicholas Piggin
5c9fa16e8a powerpc/64s: Remove PROT_SAO support
ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.

We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).

- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
  so applications would get a failure at mmap() time.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com
2020-07-22 00:01:25 +10:00
Aneesh Kumar K.V
482b9b3948 powerpc/book3s64/pkeys: Remove is_pkey_enabled()
There is only one caller to this function and the function is wrongly
named. Avoid further confusion w.r.t name and open code this at the
only call site. Also remove read_uamor(). There are no users for
the same after this.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-24-aneesh.kumar@linux.ibm.com
2020-07-22 00:01:22 +10:00
Aneesh Kumar K.V
e0d8e991be powerpc/book3s64/kuap: Move UAMOR setup to key init function
UAMOR values are not application-specific. The kernel initializes
its value based on different reserved keys. Remove the thread-specific
UAMOR value and don't switch the UAMOR on context switch.

Move UAMOR initialization to key initialization code and remove
thread_struct.uamor because it is not used anymore.

Before commit: 4a4a5e5d2a ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
we used to update uamor based on key allocation and free.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-20-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:59 +10:00
Aneesh Kumar K.V
000a42b35a powerpc/book3s64/keys/kuap: Reset AMR/IAMR values on kexec
As we kexec across kernels that use AMR/IAMR for different purposes
we need to ensure that new kernels get kexec'd with a reset value
of AMR/IAMR. For ex: the new kernel can use key 0 for kernel mapping and the old
AMR value prevents access to key 0.

This patch also removes reset if IAMR and AMOR in kexec_sequence. Reset of AMOR
is not needed and the IAMR reset is partial (it doesn't do the reset
on secondary cpus) and is redundant with this patch.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-19-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:59 +10:00
Aneesh Kumar K.V
7cdd3745f2 powerpc/book3s64/keys: Print information during boot.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-18-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:59 +10:00
Aneesh Kumar K.V
f7045a4511 powerpc/book3s64/pkeys: Use MMU_FTR_PKEY instead of pkey_disabled static key
Instead of pkey_disabled static key use mmu feature MMU_FTR_PKEY.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-17-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:59 +10:00
Aneesh Kumar K.V
2daf298de7 powerpc/book3s64/pkeys: Use pkey_execute_disable_supported
Use pkey_execute_disable_supported to check for execute key support instead
of pkey_disabled.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-16-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:59 +10:00
Aneesh Kumar K.V
e10cc8715d powerpc/book3s64/kuep: Add MMU_FTR_KUEP
This will be used to enable/disable Kernel Userspace Execution
Prevention (KUEP).

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-15-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:58 +10:00
Aneesh Kumar K.V
d3cd91fb8d powerpc/book3s64/pkeys: Add MMU_FTR_PKEY
Parse storage keys related device tree entry in early_init_devtree
and enable MMU feature MMU_FTR_PKEY if pkeys are supported.

MMU feature is used instead of CPU feature because this enables us
to group MMU_FTR_KUAP and MMU_FTR_PKEY in asm feature fixup code.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-14-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:58 +10:00
Aneesh Kumar K.V
3e4352aeb8 powerpc/book3s64/pkeys: Mark all the pkeys above max pkey as reserved
The hypervisor can return less than max allowed pkey (for ex: 31) instead
of 32. We should mark all the pkeys above max allowed as reserved so
that we avoid the allocation of the wrong pkey(for ex: key 31 in the above
case) by userspace.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-13-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:58 +10:00
Aneesh Kumar K.V
3c8ab47362 powerpc/book3s64/pkeys: Make initial_allocation_mask static
initial_allocation_mask is not used outside this file.
Also mark reserved_allocation_mask and initial_allocation_mask __ro_after_init;

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-12-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:58 +10:00
Aneesh Kumar K.V
c529afd7cb powerpc/book3s64/pkeys: Convert pkey_total to num_pkey
num_pkey now represents max number of keys supported such that we return
to userspace 0 - num_pkey - 1.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-11-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:58 +10:00
Aneesh Kumar K.V
a4678d4b47 powerpc/book3s64/pkeys: Simplify pkey disable branch
Make the default value FALSE (pkey enabled) and set to TRUE when we
find the total number of keys supported to be zero.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-10-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:58 +10:00
Aneesh Kumar K.V
718d9b3801 powerpc/book3s64/pkeys: Prevent key 1 modification from userspace.
Key 1 is marked reserved by ISA. Setup uamor to prevent userspace modification
of the same.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-8-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:58 +10:00
Aneesh Kumar K.V
f491fe3fb4 powerpc/book3s64/pkeys: Simplify the key initialization
Add documentation explaining the execute_only_key. The reservation and initialization mask
details are also explained in this patch.

No functional change in this patch.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-7-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:57 +10:00
Aneesh Kumar K.V
1f404058e2 powerpc/book3s64/pkeys: Explain key 1 reservation details
This explains the details w.r.t key 1.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-6-aneesh.kumar@linux.ibm.com
2020-07-20 22:57:57 +10:00