The xilinx dma driver uses the consistent allocations, so for correct
operation also set the DMA mask for coherent APIs. It fixes the below
kernel crash with dmatest client when DMA IP is configured with 64-bit
address width and linux is booted from high (>4GB) memory.
Call trace:
[ 489.531257] dma_alloc_from_pool+0x8c/0x1c0
[ 489.535431] dma_direct_alloc+0x284/0x330
[ 489.539432] dma_alloc_attrs+0x80/0xf0
[ 489.543174] dma_pool_alloc+0x160/0x2c0
[ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180
[ 489.551524] dmatest_func+0x3cc/0x114c
[ 489.555266] kthread+0x124/0x130
[ 489.558486] ret_from_fork+0x10/0x3c
[ 489.562051] ---[ end trace 248625b2d596a90a ]---
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Harini Katakam <harini.katakam@xilinx.com>
Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Various DMA users call the dmaengine_slave_config() and expect it to
succeed, but that can only succeed if .device_config is implemented.
Add empty device_config function rather than patching all the places
which use dmaengine_slave_config().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210804195140.61396-1-marex@denx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When user calls dmaengine_terminate_sync, the driver will clean up any
remaining descriptors for all the pending or active transfers that had
previously been submitted. However, this might happen whilst the tasklet is
invoking the DMA callback for the last finished transfer, so by the time it
returns and takes over the channel's spinlock, the list of completed
descriptors it was traversing is no longer valid. This leads to a
read-after-free situation.
Fix it by signalling whether a user-triggered termination has happened by
means of a boolean variable.
Signed-off-by: Adrian Larumbe <adrian.martinezlarumbe@imgtec.com>
Link: https://lore.kernel.org/r/20210706234338.7696-3-adrian.martinezlarumbe@imgtec.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New drivers/devices
- Support for QCOM SM8250 GPI DMA
- removal of shdma-of driver and binding
Updates:
- arm-pl08x yaml binding move
- altera-msgdma gained DT support
- removal of imx-sdma platform data support
- idxd and xilinx driver updates
-----BEGIN PGP SIGNATURE-----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=yltL
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"This time around we have a smaller pull request than usual and this
includes code removal, so should be good!
New drivers/devices
- Support for QCOM SM8250 GPI DMA
- removal of shdma-of driver and binding
Updates:
- arm-pl08x yaml binding move
- altera-msgdma gained DT support
- removal of imx-sdma platform data support
- idxd and xilinx driver updates"
* tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (22 commits)
dmaengine: imx-sdma: Remove platform data header
dmaengine: xilinx: dpdma: Fix spacing around addr[i-1]
dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t
dmaengine: altera-msgdma: add OF support
MAINTAINERS: add entry for Altera mSGDMA
dt-bindings: dma: add schema for altera-msgdma
dmaengine: xilinx: dpdma: fix kernel-doc
dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy()
dmaengine: sh: Remove unused shdma-of driver
dt-bindings: dmaengine: Remove SHDMA Device Tree bindings
dmaengine: qcom: gpi: Add SM8250 compatible
dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250
dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tail
dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors
dmaengine: hsu: Account transferred bytes
dmaengine: Move kdoc description of struct dma_chan_percpu closer to it
dmaengine: xilinx: dpdma: Print debug message when losing vsync race
dmaengine: xilinx: dpdma: Print channel number in kernel log messages
dt-bindings: dma: convert arm-pl08x to yaml
dmaengine: idxd: remove devm allocation for idxd->int_handles
...
Fix function name in xilinx/xilinx_dpdma.c comment to remove
a warning found by kernel-doc.
drivers/dma/xilinx/xilinx_dpdma.c:935: warning: expecting prototype for
xilinx_dpdma_chan_no_ostand(). Prototype was for
xilinx_dpdma_chan_notify_no_ostand() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1623222893-123227-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The hardware retrigger is inherently racy with the vsync interrupt. This
isn't an issue as the hardware provides a way to detect a race loss and
handle it correctly. When debugging issues related to this, it's useful
to get a notification of the race loss. Add a debug message to do so.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Link: https://lore.kernel.org/r/20210520152420.23986-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To ease debugging, add the channel number to all kernel log messages
related to a particular channel.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Link: https://lore.kernel.org/r/20210520152420.23986-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
While the descriptor ID is stored in a 32-bit field in the hardware
descriptor, only 16 bits are used by the hardware and are reported
through the XILINX_DPDMA_CH_DESC_ID register. Failure to handle the
wrap-around results in a descriptor ID mismatch after 65536 frames. Fix
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Link: https://lore.kernel.org/r/20210520152420.23986-5-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20210517081826.1564698-4-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Xilinx dmaengine driver uses a tasklet to process completed
descriptors and execute their callbacks.
Currently consumers of the DMA channel have to no method of synchronization
against this tasklet when using the Xilinx dmaengine drivers. This can lead
to race conditions when the consumer frees resources that are accessed in
the callback before the tasklet has finished running.
It is not enough to just call dmaengine_terminal_all() since on a
multi-processor system the tasklet can run concurrently to it and might
call the callback after dmaengine_terminate_all() has already finished.
To mitigate this issue implement the synchronize() callback for the driver,
which will wait until the tasklet has finished.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210313125311.4823-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The active descriptor pointer is accessed from different contexts,
including different interrupt handlers, and its access must be protected
by the channel's lock. This wasn't done in the done IRQ handler. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210307040629.29308-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When multiple channels are part of a video group, the transfer is
triggered only when all channels in the group are ready. The logic to do
so is incorrect, as it causes the descriptors for all channels but the
last one in a group to not being pushed to the hardware. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210307040629.29308-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use GFP_NOWAIT allocation in xilinx_dma_alloc_tx_descriptor().
This is necessary for compatibility with ALSA, which calls
dmaengine_prep_dma_cyclic() from an atomic context.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210129170800.31857-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In xilinx_dma_child_probe function, the nr_channels variable is
passed to of_property_read_u32() which expects an u32 return value
pointer. Modify the nr_channels variable type from int to u32 to
fix the incompatible parameter coverity warning.
Addresses-Coverity: Event incompatible_param.
Fixes: 1a9e7a03c7 ("dmaengine: vdma: Add support for mulit-channel dma mode")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SG capability is inherently present with Multichannel DMA operation.
The register used to check for this capability with other DMA driver types
is not defined for MCDMA.
Fixes: 6ccd692bfb ("dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support")
Signed-off-by: Matthew Murrian <matthew.murrian@goctsi.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1604473206-32573-4-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Several code sections incorrectly use struct xilinx_axidma_tx_segment
instead of struct xilinx_aximcdma_tx_segment when operating as
Multichannel DMA. As their structures are similar, this just works.
Fixes: 6ccd692bfb ("dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support")
Signed-off-by: Matthew Murrian <matthew.murrian@goctsi.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1604473206-32573-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The xilinx_dma_poll_timeout macro is sometimes called while holding a
spinlock (see xilinx_dma_issue_pending() for an example) this means we
shouldn't sleep when polling the dma channel registers. To address it
in xilinx poll timeout macro use readl_poll_timeout_atomic instead of
readl_poll_timeout variant.
Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1604473206-32573-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit f19a11d40a ("dmaengine: xilinx: convert tasklets to use new
tasklet_setup() API") updated driver to use new tasklet_setup() API but
missed to update the documentation for the tasklet function.
Fixes: f19a11d40a ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API")
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20201007083113.567559-5-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit f19a11d40a ("dmaengine: xilinx: convert tasklets to use new
tasklet_setup() API") updated driver to use new tasklet_setup() API but
missed to update the documentation for the tasklet function.
Fixes: f19a11d40a ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API")
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20201007083113.567559-4-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20201006050458.221329-2-allen.lkml@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200831103542.305571-33-allen.lkml@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828152637.16903-3-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sparse tool complains as follows:
drivers/dma/xilinx/xilinx_dpdma.c:349:37: warning:
symbol 'dpdma_debugfs_reqs' was not declared. Should it be static?
This variable is not used outside of xilinx_dpdma.c, so this commit
marks it static.
Fixes: 1d220435ca ("dmaengine: xilinx: dpdma: Add debugfs support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200818112217.43816-1-weiyongjun1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the struct xilinx_dpdma_chan desc field to fix a kerneldoc
undocumented member warning (which can be reproduced by compiling with
W=1).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200722161747.30048-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
xilinx_dpdma_sw_desc_set_dma_addrs() documentation is missing describing
'xdev', so add it
drivers/dma/xilinx/xilinx_dpdma.c:313: warning: Function parameter or
member 'xdev' not described in 'xilinx_dpdma_sw_desc_set_dma_addrs'
Link: https://lore.kernel.org/r/20200718135201.191881-2-vkoul@kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
xilinx_dpdma_config() channel id is unsigned int and compares with
ZYNQMP_DPDMA_VIDEO0 which is zero, so remove this comparison
drivers/dma/xilinx/xilinx_dpdma.c:1073:15: warning: comparison of
unsigned expression in ‘>= 0’ is always true [-Wtype-limits] if
(chan->id >= ZYNQMP_DPDMA_VIDEO0 && chan->id <= ZYNQMP_DPDMA_VIDEO2)
Link: https://lore.kernel.org/r/20200718135201.191881-1-vkoul@kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ZynqMP DisplayPort subsystem includes a DMA engine called DPDMA with
6 DMa channels (4 for display and 2 for audio). This driver exposes the
DPDMA through the dmaengine API, to be used by audio (ALSA) and display
(DRM) drivers for the DisplayPort subsystem.
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Tejas Upadhyay <tejasu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200717013337.24122-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA transfer might finish just after checking the state with
dma_cookie_status, but before the lock is acquired. Not checking
for an empty list in xilinx_dma_tx_status may result in reading
random data or data corruption when desc is written to. This can
be reliably triggered by using dma_sync_wait to wait for DMA
completion.
Signed-off-by: Sebastian von Ohr <vonohr@smaract.com>
Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20200303130518.333-1-vonohr@smaract.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In overlay application we noticed that dma channel node probe order is
inverted i.e s2mm channel is probed first followed by mm2s channel. The
reason for this inversion is fdtoverlay utility which uses a function
called fdt_add_subnode(*). It stores the subnodes after the properties,
this has the effect of inserting the new subnode before any others and
the end result is a reversal.
Because of this inverted channel probe order, the node probed first is
assigned a '0' index instead of Channel ID should be '0' for tx and '1'
for rx and dmatest client using the DT convention fails in dma transfer
as channel are swapped.
To fix above behavior and make channel assignment index independent
of probe order, always assign mm2s channel at '0' index and the s2mm
channel at IP specific fixed offset derived from the max_channels
count.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1580388865-9960-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extend dma_config structure to store the max channel count. This input is
used to populate dma device channel nodes at the fixed offset. It serves
as a preparatory patch for removing dma channel DT node order dependency,
added in the subsequent commit.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1580388865-9960-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reset DMA channel after stop to ensure that pending transfers and FIFOs
in the datapath are flushed or completed. It also cleanup the terminate
path and removes stop for the cyclic mode as after the reset stop is not
required. This fixes intermittent data verification failure when xilinx
dma test the client is stressed and loaded/unloaded multiple times.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1580283909-32678-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since the dma engine expects the burst length register content as
power of 2 value, the burst length needs to be converted first.
Additionally add a burst length range check to avoid corrupting unrelated
register bits.
Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
Link: https://lore.kernel.org/r/20200115102249.24398-1-matthias.fend@wolfvision.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for AXI Multichannel Direct Memory Access (AXI MCDMA)
core, which is a soft Xilinx IP core that provides high-bandwidth
direct memory access between memory and AXI4-Stream target peripherals.
The AXI MCDMA core provides scatter-gather interface with multiple
independent transmit and receive channels. The driver supports
device_prep_slave_sg slave transfer mode.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571763622-29281-7-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extend dma_config structure to store irq routine handle. It enables runtime
handler selection based on xdma_ip_type and serves as preparatory patch for
adding MCDMA IP support.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Suggested-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/1571763622-29281-6-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The AXI DMA multichannel support is deprecated in the IP and it is no
longer actively supported. For multichannel support, refer to the AXI
multichannel direct memory access IP product guide(PG228) and MCDMA
driver. So inline with it remove axidma multichannel support from
from the driver.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571763622-29281-5-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Whenever we reset the channel, we need to clear desc_pendingcount
along with desc_submitcount. Otherwise when a new transaction is
submitted, the irq coalesce level could be programmed to an incorrect
value in the axidma case.
This behavior can be observed when terminating pending transactions
with xilinx_dma_terminate_all() and then submitting new transactions
without releasing and requesting the channel.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-8-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver should not run out of tx segments in normal operation. But,
if the user attempts to prepare a transaction with a large sg list,
the driver may not have enough free segments to accommodate the request.
Log a message at the debug level to inform the user in case they are
experiencing issues.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-7-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Take advantage of dmaengine_desc_get_callback_invoke which allows either
a callback or callback_result to be specified. This can be useful when
using the AXI DMA transfer unknown quantities of data where the residue
contained in the result can be used to calculate the number of bytes
transferred.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-6-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
