Commit Graph

251 Commits

Author SHA1 Message Date
Linus Torvalds
c103b21c20 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
 "The first part makes sure we don't hold up umount with pending async
  requests.  In addition to being a cleanup, this is a small behavioral
  change (for the better) and unlikely to break anything.

  The second part prepares for a cleanup of the fuse device I/O code by
  adding a helper for simple request submission, with some savings in
  line numbers already realized"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: use file_inode() in fuse_file_fallocate()
  fuse: introduce fuse_simple_request() helper
  fuse: reduce max out args
  fuse: hold inode instead of path after release
  fuse: flush requests on umount
  fuse: don't wake up reserved req in fuse_conn_kill()
2014-12-17 09:41:32 -08:00
Miklos Szeredi
1c68271cf1 fuse: use file_inode() in fuse_file_fallocate()
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12 10:04:51 +01:00
Miklos Szeredi
7078187a79 fuse: introduce fuse_simple_request() helper
The following pattern is repeated many times:

	req = fuse_get_req_nopages(fc);
	/* Initialize req->(in|out).args */
	fuse_request_send(fc, req);
	err = req->out.h.error;
	fuse_put_request(req);

Create a new replacement helper:

	/* Initialize args */
	err = fuse_simple_request(fc, &args);

In addition to reducing the code size, this will ease moving from the
complex arg-based to a simpler page-based I/O on the fuse device.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12 09:49:05 +01:00
Miklos Szeredi
baebccbe99 fuse: hold inode instead of path after release
path_put() in release could trigger a DESTROY request in fuseblk.  The
possible deadlock was worked around by doing the path_put() with
schedule_work().

This complexity isn't needed if we just hold the inode instead of the path.
Since we now flush all requests before destroying the super block we can be
sure that all held inodes will be dropped.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12 09:49:04 +01:00
Al Viro
a455589f18 assorted conversions to %p[dD]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-19 13:01:20 -05:00
Miklos Szeredi
2c80929c4c fuse: honour max_read and max_write in direct_io mode
The third argument of fuse_get_user_pages() "nbytesp" refers to the number of
bytes a caller asked to pack into fuse request. This value may be lesser
than capacity of fuse request or iov_iter.  So fuse_get_user_pages() must
ensure that *nbytesp won't grow.

Now, when helper iov_iter_get_pages() performs all hard work of extracting
pages from iov_iter, it can be done by passing properly calculated
"maxsize" to the helper.

The other caller of iov_iter_get_pages() (dio_refill_pages()) doesn't need
this capability, so pass LONG_MAX as the maxsize argument here.

Fixes: c9c37e2e63 ("fuse: switch to iov_iter_get_pages()")
Reported-by: Werner Baumann <werner.baumann@onlinehome.de>
Tested-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26 21:16:51 -04:00
Al Viro
c7f3888ad7 switch iov_iter_get_pages() to passing maximal number of pages
... instead of maximal size.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07 14:40:11 -04:00
Linus Torvalds
0b632204c7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
 "This contains miscellaneous fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: replace count*size kzalloc by kcalloc
  fuse: release temporary page if fuse_writepage_locked() failed
  fuse: restructure ->rename2()
  fuse: avoid scheduling while atomic
  fuse: handle large user and group ID
  fuse: inode: drop cast
  fuse: ignore entry-timeout on LOOKUP_REVAL
  fuse: timeout comparison fix
2014-07-15 08:57:17 -07:00
Fabian Frederick
f2b3455e47 fuse: replace count*size kzalloc by kcalloc
kcalloc manages count*sizeof overflow.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-07-14 16:30:25 +02:00
Maxim Patlasov
27f1b36326 fuse: release temporary page if fuse_writepage_locked() failed
tmp_page to be freed if fuse_write_file_get() returns NULL.

Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-07-14 16:17:57 +02:00
Linus Torvalds
16b9057804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "This the bunch that sat in -next + lock_parent() fix.  This is the
  minimal set; there's more pending stuff.

  In particular, I really hope to get acct.c fixes merged this cycle -
  we need that to deal sanely with delayed-mntput stuff.  In the next
  pile, hopefully - that series is fairly short and localized
  (kernel/acct.c, fs/super.c and fs/namespace.c).  In this pile: more
  iov_iter work.  Most of prereqs for ->splice_write with sane locking
  order are there and Kent's dio rewrite would also fit nicely on top of
  this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
  lock_parent: don't step on stale ->d_parent of all-but-freed one
  kill generic_file_splice_write()
  ceph: switch to iter_file_splice_write()
  shmem: switch to iter_file_splice_write()
  nfs: switch to iter_splice_write_file()
  fs/splice.c: remove unneeded exports
  ocfs2: switch to iter_file_splice_write()
  ->splice_write() via ->write_iter()
  bio_vec-backed iov_iter
  optimize copy_page_{to,from}_iter()
  bury generic_file_aio_{read,write}
  lustre: get rid of messing with iovecs
  ceph: switch to ->write_iter()
  ceph_sync_direct_write: stop poking into iov_iter guts
  ceph_sync_read: stop poking into iov_iter guts
  new helper: copy_page_from_iter()
  fuse: switch to ->write_iter()
  btrfs: switch to ->write_iter()
  ocfs2: switch to ->write_iter()
  xfs: switch to ->write_iter()
  ...
2014-06-12 10:30:18 -07:00
Mel Gorman
2457aec637 mm: non-atomically mark page accessed during page cache allocation where possible
aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after.  Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage.  The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.

The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page.  This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.

The primary APIs of concern in this care are the following and are used
by most filesystems.

	find_get_page
	find_lock_page
	find_or_create_page
	grab_cache_page_nowait
	grab_cache_page_write_begin

All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not.  Then
old API is preserved but is basically a thin wrapper around this core
function.

Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job.  There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted.  This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change.  It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.

The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations.  The size of the
file is 1/10th physical memory to avoid dirty page balancing.  In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO.  The sync results are expected to be
more stable.  The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.

The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts.  Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison.  As async results were variable
do to writback timings, I'm only reporting the maximum figures.  The sync
results were stable enough to make the mean and stddev uninteresting.

The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.

async dd
                                    3.15.0-rc3            3.15.0-rc3
                                       vanilla           accessed-v2
ext3    Max      elapsed     13.9900 (  0.00%)     11.5900 ( 17.16%)
tmpfs	Max      elapsed      0.5100 (  0.00%)      0.4900 (  3.92%)
btrfs   Max      elapsed     12.8100 (  0.00%)     12.7800 (  0.23%)
ext4	Max      elapsed     18.6000 (  0.00%)     13.3400 ( 28.28%)
xfs	Max      elapsed     12.5600 (  0.00%)      2.0900 ( 83.36%)

The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.

        samples percentage
ext3       86107    0.9783  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext3       23833    0.2710  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3        5036    0.0573  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4       64566    0.8961  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext4        5322    0.0713  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4        2869    0.0384  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs        62126    1.7675  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
xfs         1904    0.0554  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs          103    0.0030  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs      10655    0.1338  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
btrfs       2020    0.0273  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs        587    0.0079  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs      59562    3.2628  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
tmpfs       1210    0.0696  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs         94    0.0054  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed

[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:10 -07:00
Jeff Layton
130d1f956a locks: ensure that fl_owner is always initialized properly in flock and lease codepaths
Currently, the fl_owner isn't set for flock locks. Some filesystems use
byte-range locks to simulate flock locks and there is a common idiom in
those that does:

    fl->fl_owner = (fl_owner_t)filp;
    fl->fl_start = 0;
    fl->fl_end = OFFSET_MAX;

Since flock locks are generally "owned" by the open file description,
move this into the common flock lock setup code. The fl_start and fl_end
fields are already set appropriately, so remove the unneeded setting of
that in flock ops in those filesystems as well.

Finally, the lease code also sets the fl_owner as if they were owned by
the process and not the open file description. This is incorrect as
leases have the same ownership semantics as flock locks. Set them the
same way. The lease code doesn't actually use the fl_owner value for
anything, so this is more for consistency's sake than a bugfix.

Reported-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (Staging portion)
Acked-by: J. Bruce Fields <bfields@fieldses.org>
2014-06-02 08:09:29 -04:00
Al Viro
62a8067a7f bio_vec-backed iov_iter
New variant of iov_iter - ITER_BVEC in iter->type, backed with
bio_vec array instead of iovec one.  Primitives taught to deal
with such beasts, __swap_write() switched to using that kind
of iov_iter.

Note that bio_vec is just a <page, offset, length> triple - there's
nothing block-specific about it.  I've left the definition where it
was, but took it from under ifdef CONFIG_BLOCK.

Next target: ->splice_write()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:39:45 -04:00
Al Viro
84c3d55cc4 fuse: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:39:41 -04:00
Al Viro
37c20f16e7 fuse_file_aio_read(): convert to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:37:57 -04:00
Al Viro
0c949334a9 iov_iter_truncate()
Now It Can Be Done(tm) - we don't need to do iov_shorten() in
generic_file_direct_write() anymore, now that all ->direct_IO()
instances are converted to proper iov_iter methods and honour
iter->count and iter->iov_offset properly.

Get rid of count/ocount arguments of generic_file_direct_write(),
while we are at it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:54 -04:00
Al Viro
f67da30c1d new helper: iov_iter_npages()
counts the pages covered by iov_iter, up to given limit.
do_block_direct_io() and fuse_iter_npages() switched to
it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:52 -04:00
Al Viro
c9c37e2e63 fuse: switch to iov_iter_get_pages()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:51 -04:00
Al Viro
d22a943f44 fuse: pull iov_iter initializations up
... to fuse_direct_{read,write}().  ->direct_IO() path uses the
iov_iter passed by the caller instead.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:51 -04:00
Al Viro
71d8e532b1 start adding the tag to iov_iter
For now, just use the same thing we pass to ->direct_IO() - it's all
iovec-based at the moment.  Pass it explicitly to iov_iter_init() and
account for kvec vs. iovec in there, by the same kludge NFS ->direct_IO()
uses.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:49 -04:00
Al Viro
23faa7b8db fuse_file_aio_write(): merge initializations of iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:48 -04:00
Al Viro
a6cbcd4a4a get rid of pointless iov_length() in ->direct_IO()
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:45 -04:00
Al Viro
d8d3d94b80 pass iov_iter to ->direct_IO()
unmodified, for now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:44 -04:00
Al Viro
cb66a7a1f1 kill generic_segment_checks()
all callers of ->aio_read() and ->aio_write() have iov/nr_segs already
checked - generic_segment_checks() done after that is just an odd way
to spell iov_length().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:43 -04:00
Al Viro
f8579f8673 generic_file_direct_write(): switch to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:42 -04:00
Maxim Patlasov
ab9e13f7c7 fuse: allow ctime flushing to userspace
The patch extends fuse_setattr_in, and extends the flush procedure
(fuse_flush_times()) called on ->write_inode() to send the ctime as well as
mtime.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28 14:19:24 +02:00
Miklos Szeredi
1e18bda86e fuse: add .write_inode
...and flush mtime from this.  This allows us to use the kernel
infrastructure for writing out dirty metadata (mtime at this point, but
ctime in the next patches and also maybe atime).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28 14:19:23 +02:00
Miklos Szeredi
22401e7b7a fuse: clean up fsync
Don't need to start I/O twice (once without i_mutex and one within).

Also make sure that even if the userspace filesystem doesn't support FSYNC
we do all the steps other than sending the message.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28 14:19:23 +02:00
Miklos Szeredi
93d2269d2f fuse: fuse: fallocate: use file_update_time()
in preparation for getting rid of FUSE_I_MTIME_DIRTY.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28 14:19:22 +02:00
Maxim Patlasov
75caeecdf9 fuse: update mtime on open(O_TRUNC) in atomic_o_trunc mode
In case of fc->atomic_o_trunc is set, fuse does nothing in
fuse_do_setattr() while handling open(O_TRUNC). Hence, i_mtime must be
updated explicitly in fuse_finish_open(). The patch also adds extra locking
encompassing open(O_TRUNC) operation to avoid races between the truncation
and updating i_mtime.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28 14:19:22 +02:00
Miklos Szeredi
aeb4eb6b55 fuse: fix mtime update error in fsync
Bad case of shadowing.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28 14:19:21 +02:00
Miklos Szeredi
4adb83029d fuse: check fallocate mode
Don't allow new fallocate modes until we figure out what (if anything) that
takes.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28 14:19:21 +02:00
Linus Torvalds
5166701b36 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The first vfs pile, with deep apologies for being very late in this
  window.

  Assorted cleanups and fixes, plus a large preparatory part of iov_iter
  work.  There's a lot more of that, but it'll probably go into the next
  merge window - it *does* shape up nicely, removes a lot of
  boilerplate, gets rid of locking inconsistencie between aio_write and
  splice_write and I hope to get Kent's direct-io rewrite merged into
  the same queue, but some of the stuff after this point is having
  (mostly trivial) conflicts with the things already merged into
  mainline and with some I want more testing.

  This one passes LTP and xfstests without regressions, in addition to
  usual beating.  BTW, readahead02 in ltp syscalls testsuite has started
  giving failures since "mm/readahead.c: fix readahead failure for
  memoryless NUMA nodes and limit readahead pages" - might be a false
  positive, might be a real regression..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  kill generic_file_buffered_write()
  ocfs2_file_aio_write(): switch to generic_perform_write()
  ceph_aio_write(): switch to generic_perform_write()
  xfs_file_buffered_aio_write(): switch to generic_perform_write()
  export generic_perform_write(), start getting rid of generic_file_buffer_write()
  generic_file_direct_write(): get rid of ppos argument
  btrfs_file_aio_write(): get rid of ppos
  kill the 5th argument of generic_file_buffered_write()
  kill the 4th argument of __generic_file_aio_write()
  lustre: don't open-code kernel_recvmsg()
  ocfs2: don't open-code kernel_recvmsg()
  drbd: don't open-code kernel_recvmsg()
  constify blk_rq_map_user_iov() and friends
  lustre: switch to kernel_sendmsg()
  ocfs2: don't open-code kernel_sendmsg()
  take iov_iter stuff to mm/iov_iter.c
  process_vm_access: tidy up a bit
  ...
2014-04-12 14:49:50 -07:00
Kirill A. Shutemov
f1820361f8 mm: implement ->map_pages for page cache
filemap_map_pages() is generic implementation of ->map_pages() for
filesystems who uses page cache.

It should be safe to use filemap_map_pages() for ->map_pages() if
filesystem use filemap_fault() for ->fault().

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ning Qu <quning@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:53 -07:00
Rajat Jain
f3846266f5 fuse: fix "uninitialized variable" warning
Fix the following warning:

In file included from include/linux/fs.h:16:0,
                 from fs/fuse/fuse_i.h:13,
                 from fs/fuse/file.c:9:
fs/fuse/file.c: In function 'fuse_file_poll':
include/linux/rbtree.h:82:28: warning: 'parent' may be used
uninitialized in this function [-Wmaybe-uninitialized]
fs/fuse/file.c:2592:27: note: 'parent' was declared here

Signed-off-by: Rajat Jain <rajatxjain@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:51 +02:00
Pavel Emelyanov
4d99ff8f12 fuse: Turn writeback cache on
Introduce a bit kernel and userspace exchange between each-other on
the init stage and turn writeback on if the userspace want this and
mount option 'allow_wbcache' is present (controlled by fusermount).

Also add each writable file into per-inode write list and call the
generic_file_aio_write to make use of the Linux page cache engine.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:50 +02:00
Pavel Emelyanov
ea8cd33390 fuse: Fix O_DIRECT operations vs cached writeback misorder
The problem is:

1. write cached data to a file
2. read directly from the same file (via another fd)

The 2nd operation may read stale data, i.e. the one that was in a file
before the 1st op. Problem is in how fuse manages writeback.

When direct op occurs the core kernel code calls filemap_write_and_wait
to flush all the cached ops in flight. But fuse acks the writeback right
after the ->writepages callback exits w/o waiting for the real write to
happen. Thus the subsequent direct op proceeds while the real writeback
is still in flight. This is a problem for backends that reorder operation.

Fix this by making the fuse direct IO callback explicitly wait on the
in-flight writeback to finish.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:50 +02:00
Maxim Patlasov
fe38d7df23 fuse: fuse_flush() should wait on writeback
The aim of .flush fop is to hint file-system that flushing its state or caches
or any other important data to reliable storage would be desirable now.
fuse_flush() passes this hint by sending FUSE_FLUSH request to userspace.
However, dirty pages and pages under writeback may be not visible to userspace
yet if we won't ensure it explicitly.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:50 +02:00
Pavel Emelyanov
6b12c1b37e fuse: Implement write_begin/write_end callbacks
The .write_begin and .write_end are requiered to use generic routines
(generic_file_aio_write --> ... --> generic_perform_write) for buffered
writes.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:49 +02:00
Maxim Patlasov
482fce55d2 fuse: restructure fuse_readpage()
Move the code filling and sending read request to a separate function. Future
patches will use it for .write_begin -- partial modification of a page
requires reading the page from the storage very similarly to what fuse_readpage
does.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:49 +02:00
Pavel Emelyanov
e7cc133c37 fuse: Flush files on wb close
Any write request requires a file handle to report to the userspace. Thus
when we close a file (and free the fuse_file with this info) we have to
flush all the outstanding dirty pages.

filemap_write_and_wait() is enough because every page under fuse writeback
is accounted in ff->count. This delays actual close until all fuse wb is
completed.

In case of "write cache" turned off, the flush is ensured by fuse_vma_close().

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:49 +02:00
Maxim Patlasov
b0aa760652 fuse: Trust kernel i_mtime only
Let the kernel maintain i_mtime locally:
 - clear S_NOCMTIME
 - implement i_op->update_time()
 - flush mtime on fsync and last close
 - update i_mtime explicitly on truncate and fallocate

Fuse inode flag FUSE_I_MTIME_DIRTY serves as indication that local i_mtime
should be flushed to the server eventually.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:48 +02:00
Pavel Emelyanov
8373200b12 fuse: Trust kernel i_size only
Make fuse think that when writeback is on the inode's i_size is always
up-to-date and not update it with the value received from the userspace.
This is done because the page cache code may update i_size without letting
the FS know.

This assumption implies fixing the previously introduced short-read helper --
when a short read occurs the 'hole' is filled with zeroes.

fuse_file_fallocate() is also fixed because now we should keep i_size up to
date, so it must be updated if FUSE_FALLOCATE request succeeded.

Signed-off-by: Maxim V. Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:48 +02:00
Pavel Emelyanov
a92adc824e fuse: Prepare to handle short reads
A helper which gets called when read reports less bytes than was requested.
See patch "trust kernel i_size only" for details.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:47 +02:00
Pavel Emelyanov
650b22b941 fuse: Linking file to inode helper
When writeback is ON every writeable file should be in per-inode write list,
not only mmap-ed ones. Thus introduce a helper for this linkage.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:47 +02:00
Al Viro
5cb6c6c7eb generic_file_direct_write(): get rid of ppos argument
always equal to &iocb->ki_pos.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:35 -04:00
Al Viro
9e8c2af96e callers of iov_copy_from_user_atomic() don't need pagecache_disable()
... it does that itself (via kmap_atomic())

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:20 -04:00
Linus Torvalds
bf3d846b78 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "Assorted stuff; the biggest pile here is Christoph's ACL series.  Plus
  assorted cleanups and fixes all over the place...

  There will be another pile later this week"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits)
  __dentry_path() fixes
  vfs: Remove second variable named error in __dentry_path
  vfs: Is mounted should be testing mnt_ns for NULL or error.
  Fix race when checking i_size on direct i/o read
  hfsplus: remove can_set_xattr
  nfsd: use get_acl and ->set_acl
  fs: remove generic_acl
  nfs: use generic posix ACL infrastructure for v3 Posix ACLs
  gfs2: use generic posix ACL infrastructure
  jfs: use generic posix ACL infrastructure
  xfs: use generic posix ACL infrastructure
  reiserfs: use generic posix ACL infrastructure
  ocfs2: use generic posix ACL infrastructure
  jffs2: use generic posix ACL infrastructure
  hfsplus: use generic posix ACL infrastructure
  f2fs: use generic posix ACL infrastructure
  ext2/3/4: use generic posix ACL infrastructure
  btrfs: use generic posix ACL infrastructure
  fs: make posix_acl_create more useful
  fs: make posix_acl_chmod more useful
  ...
2014-01-28 08:38:04 -08:00
Steven Whitehouse
9fe55eea7e Fix race when checking i_size on direct i/o read
So far I've had one ACK for this, and no other comments. So I think it
is probably time to send this via some suitable tree. I'm guessing that
the vfs tree would be the most appropriate route, but not sure that
there is one at the moment (don't see anything recent at kernel.org)
so in that case I think -mm is the "back up plan". Al, please let me
know if you will take this?

Steve.

---------------------

Following on from the "Re: [PATCH v3] vfs: fix a bug when we do some dio
reads with append dio writes" thread on linux-fsdevel, this patch is my
current version of the fix proposed as option (b) in that thread.

Removing the i_size test from the direct i/o read path at vfs level
means that filesystems now have to deal with requests which are beyond
i_size themselves. These I've divided into three sets:

 a) Those with "no op" ->direct_IO (9p, cifs, ceph)
These are obviously not going to be an issue

 b) Those with "home brew" ->direct_IO (nfs, fuse)
I've been told that NFS should not have any problem with the larger
i_size, however I've added an extra test to FUSE to duplicate the
original behaviour just to be on the safe side.

 c) Those using __blockdev_direct_IO()
These call through to ->get_block() which should deal with the EOF
condition correctly. I've verified that with GFS2 and I believe that
Zheng has verified it for ext4. I've also run the test on XFS and it
passes both before and after this change.

The part of the patch in filemap.c looks a lot larger than it really is
- there are only two lines of real change. The rest is just indentation
of the contained code.

There remains a test of i_size though, which was added for btrfs. It
doesn't cause the other filesystems a problem as the test is performed
after ->direct_IO has been called. It is possible that there is a race
that does matter to btrfs, however this patch doesn't change that, so
its still an overall improvement.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-26 08:26:42 -05:00