Pass dev_priv to intel_setup_outputs() and functions called by it, since
those are all intel i915 specific functions. Also, in the majority of
the functions dev_priv is used more often than dev. In the rare cases
where there are a few calls back into drm core, a local dev variable was
added.
v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Add the tracking required to enable debugobjects for fences to improve
error detection in BAT. The debugobject interface lets us track the
lifetime and phases of the fences even while being embedded into larger
structs, i.e. to check they are not used after they have been released.
v2: Don't populate the stubs, debugobjects checks for a NULL pointer and
treats it equivalently.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-4-chris@chris-wilson.co.uk
Currently, we have an active reference for the request until it is
retired. Though it cannot be retired before it has been executed by
hardware, the request may be completed before we have finished
processing the execute fence, i.e. we may continue to process that fence
as we free the request.
Fixes: 5590af3e11 ("drm/i915: Drive request submission through fence callbacks")
Fixes: 23902e49c9 ("drm/i915: Split request submit/execute phase into two")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-3-chris@chris-wilson.co.uk
Before we return the request back to the kmem_cache after a failed
i915_gem_request_alloc(), we should assert that it has not been added to
any global state tracking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-2-chris@chris-wilson.co.uk
While we will check that the request is completed prior to being
retired, by placing an assert that the request is complete at the
entrypoint of the function we can more clearly document the function's
preconditions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-1-chris@chris-wilson.co.uk
Show the last submitted seqno to the engine, not the overall next seqno,
as this is more pertinent information when inspecting the pageflip and
whether the CS or display engine stalled.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124144750.2610-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rename i915_gem_timeline member 'next_seqno' into 'seqno' as
the variable is pre-increment. We've already had two bugs due
to the confusing name, second is fixed as follow-up patch.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124144750.2610-1-chris@chris-wilson.co.uk
Need to be careful to release struct_mutext when request alloc
failed and take consistent handling for return status as with
normal go out path. Ensure to check correct workload request in
complete path too.
v2: Add Fixes note
Fixes: 90d27a1b18 ("drm/i915/gvt: fix deadlock in workload_thread")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Some monitors will have noise or even no sound after
applying the patch 6014ac12.
In patch 6014ac12, it will reset the cts value to 0 for HDMI.
However, we need to disable Enable CTS or M Prog bit. This is
the initial setting after HW reset.
Fixes: 6014ac122e ("drm/i915/audio: set proper N/M in modeset")
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478853988-139842-1-git-send-email-libin.yang@intel.com
As i915.enable_cmd_parser is an unsafe option, make it read-only at
runtime. Now that it is constant, we can use the value determined during
initialisation as to whether we need the cmdparser at execbuffer time.
v2: Remove the inline for its single user, it is clear enough (and
shorter) without!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124125851.6615-1-chris@chris-wilson.co.uk
The i915_next_seqno read value is to be the next seqno used by the
kernel. However, in the conversion to atomics ops for gt.next_seqno, in
commit 28176ef4cf ("drm/i915: Reserve space in the global seqno during
request allocation"), this was changed from a post-increment to a
pre-increment. This increment was missed from the value reported by
debugfs, so in effect it was reporting the current seqno (last
assigned), not the next seqno.
Fixes: 28176ef4cf ("drm/i915: Reserve space in the global seqno during request allocation")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81209
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124094752.19129-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
No sense in keeping the cmd_descriptor and cmd_table structs in
i915_drv.h, now that they are no longer referenced externally.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479942147-9837-1-git-send-email-matthew.auld@intel.com
Doing cmd_header >> 29 to extract our 3-bit client value where we know
cmd_header is a u32 shouldn't then also require the use of a mask. So
remove the redundant operation and get rid of INSTR_CLIENT_MASK now that
there are no longer any users.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479163174-29686-1-git-send-email-matthew.auld@intel.com
i915_hws_info() has not been kept upto date (missing new engines) and so
I consider it to be unused. HWS is included in the error state, which
would be an avenue to retrieving it if required in future (possibly via
i915_engine_info). As it is currently oopsing with an rpm testcase, just
remove it.
Fixes: 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98838
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124093401.18852-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
For 64bit bar while reading the higher 32bit the value should be returned
directly.
In the current implementation the higher 32bit value was discarded and not
written to the cfg space of vgpu which lead to an incorrect bar size.
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
In all cases we can now obtain the relevant crtc_state/conn_state
from the relevant callbacks, which means all the ->config accesses
can be removed and the code cleaned up.
Changes since v1:
- cstate -> crtc_state
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8b02a6b4-606a-e43a-b357-ad17f491525b@linux.intel.com
[mlankhorst: Reinstate missing comment]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
A modeset on one pipe can update dev_priv->atomic_cdclk_freq without
actually touching the hardware, in which case we won't force a modeset
on all the pipes, and thus won't lock any of the other pipes either.
That means a parallel plane update on another pipe could be looking at
a stale dev_priv->atomic_cdcdlk_freq and thus fail to notice when the
plane configuration is invalid, or potentially reject a valid update.
To overcome this we must protect writes to atomic_cdclk_freq with
all the crtc locks, and thus for reads any single crtc lock will
be sufficient protection.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we end up not recomputing the cdclk, we need to populate
intel_state->cdclk with the "atomic_cdclk_freq" instead of the
current cdclk_freq. When no pipes are active, the actual cdclk_freq
may be lower than what the configuration of the planes and
pipes would require from the point of view of the software state.
This fixes bogus WARNS from skl_max_scale() which is trying to check
the plane software state against the cdclk frequency. So any time
it got called during DPMS off for instance, we might have tripped
the warn if the current mode would have required a higher than
minimum cdclk.
v2: Drop the dev_cdclk stuff (Maarten)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: bruno.pagani@ens-lyon.org
Cc: Daniel J Blueman <daniel.blueman@gmail.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Joseph Yasi <joe.yasi@gmail.com> (v1)
Cc: stable@vger.kernel.org
Fixes: 1a617b7765 ("drm/i915: Keep track of the cdclk as if all crtc's were active.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98214
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-2-git-send-email-ville.syrjala@linux.intel.com
Let's try not to abuse plane->plane for sprites on VLV/CHV and instead
use plane->id. Since out watermark structures aren't entirely plane type
agnostic (for now) and start indexing sprites from 0 we'll add a small
helper to convert between the two bases.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-7-git-send-email-ville.syrjala@linux.intel.com
Use intel_plane->id to derive the VLV/CHV sprite register offsets
instead of abusing plane->plane which is really meant to for
primary planes only.
v2: Convert assert_sprites_disabled() over as well
v3: Rename the reg macro parameter to 'plane_id' as well (Paulo)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-6-git-send-email-ville.syrjala@linux.intel.com
Replace the intel_plane->plane and hardcoded 0 usage in the SKL plane
code with intel_plane->id.
This should make the SKL "primary" and "sprite" code virtually
identical, so the next logical step would likely be dropping one
of the copies.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-5-git-send-email-ville.syrjala@linux.intel.com
Nuke skl_wm_plane_id() and just use the new intel_plane->id.
v2: Convert skl_write_plane_wm() as well
v3: Convert skl_pipe_wm_get_hw_state() correctly
v4: Rebase due to changes in the wm code
Drop the cursor FIXME from the total data rate calc (Paulo)
Use the "[PLANE:%d:%s]" format in debug print (Paulo)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude <cpaul@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Lyude <lyude@redhat.com>
Add a mask of which planes are available for each pipe. This doesn't
quite work for old platforms with dynamic plane<->pipe assignment, but
as we don't support that sort of stuff (yet) we can get away with it.
The main use I have for this is the for_each_plane_id_on_crtc() macro
for iterating over all possible planes on the crtc. I suppose we could
not add the mask, and instead iterate by comparing intel_plane->pipe
but then we'd need a local intel_plane variable which is just
unnecessary clutter in some cases. But I'm not hung up on this, so if
people prefer the other option I could be convinced to use it.
v2: Use BIT() in the iterator macro too (Paulo)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-3-git-send-email-ville.syrjala@linux.intel.com
As I told people in [1] we really should not be confusing enum plane
as a per-pipe plane identifier. Looks like that happened nonetheless, so
let's fix it up by splitting the two into two enums.
We'll also want something we just directly pass to various register
offset macros and whatnot on SKL+. So let's make this new thing work for that.
Currently we pass intel_plane->plane for the "sprites" and just a
hardcoded zero for the "primary" planes. We want to get rid of that
hardocoding so that we can share the same code for all planes (apart
from the legacy cursor of course).
[1] https://lists.freedesktop.org/archives/intel-gfx/2015-September/076082.html
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-2-git-send-email-ville.syrjala@linux.intel.com
Someone forgot to make skl_write_{plane,cursor}_wm() static when
removing the prototypes from the header. Sparse isn't pleased.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: e62929b3f6 ("drm/i915/gen9+: Program watermarks as a separate step during evasion, v3.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479846113-24745-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Lyude <lyude@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
All callers asked for a forced change but the function ignored this
parameter. It doesn't seem to be necessary to force the change in any
case so let's just remove the parameter.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-5-git-send-email-imre.deak@intel.com
Some LSPCON adaptors may return an incorrect LSPCON mode right after
waking from DP Sleep state. This is the case at least for the ParadTech
PS175 adaptor, both when waking because of exiting the DP Sleep to
active state, or due to any other AUX CH transfer. We can determine the
current expected mode based on whether the DPCD area is accessible,
since according to the LSPCON spec this area is only accesible
in PCON mode.
This wait will avoid us trying to change the mode, while the current
expected mode hasn't settled yet and start link training before the
adaptor thinks it's in PCON mode after waking from DP Sleep state.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-4-git-send-email-imre.deak@intel.com
Some LSPCON adaptors won't properly wake up in response to an AUX
request after the adaptor was placed to a DP Sink Sleep state (via
writing 0x2 to DP_SET_POWER). Based on the DP 1.4 specification 5.2.5,
the sink may place the AUX CH into a low-power state while in Sleep
state, but should wake it up in response to an AUX request within 1-20ms
(answering with AUX defers while waking it up). As opposed to this at
least the ParadTech PS175 adaptor won't fully wake in response to the
first I2C-over-AUX access and will occasionally ignore the offset in I2C
messages. This can result in accessing the DDC register at offset 0
regardless of the specified offset and the LSPCON detection failing.
To fix this do an initial dummy read from the DPCD area. The PS175 will
defer this access until it's fully woken (taking ~150ms) making sure the
following I2C-over-AUX accesses will work correctly.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=98353
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-2-git-send-email-imre.deak@intel.com
Initiate param.primary to 1. We should be primary currently.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
In order to prevent a race between the old callback submitting an
incomplete request and i915_gem_set_wedged() installing its nop handler,
we must ensure that the swap occurs when the machine is idle
(stop_machine).
v2: move context lost from out of BKL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-4-chris@chris-wilson.co.uk
Since the submit/execute split in commit d55ac5bf97 ("drm/i915: Defer
transfer onto execution timeline to actual hw submission") the
global seqno advance was deferred until the submit_request callback.
After wedging the GPU, we were installing a nop_submit_request handler
(to avoid waking up the dead hw) but I had missed converting this over
to the new scheme. Under the new scheme, we have to explicitly call
i915_gem_submit_request() from the submit_request handler to mark the
request as on the hardware. If we don't the request is always pending,
and any waiter will continue to wait indefinitely and hangcheck will not
be able to resolve the lockup.
References: https://bugs.freedesktop.org/show_bug.cgi?id=98748
Testcase: igt/gem_eio/in-flight
Fixes: d55ac5bf97 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-3-chris@chris-wilson.co.uk
If the gpu reset fails and the machine is terminally wedged, further
hangchecks achieve nothing but noise. Disable them, with a corollary
that we re-enable hangchecking after a successful GPU reset in case the
user is artificially bringing the machine back to life through the debug
interface.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-2-chris@chris-wilson.co.uk
When a user context is closed, it's file_priv backpointer is replaced by
ERR_PTR(-EBADF); be careful not to chase this invalid pointer after a
hang and a GPU reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b083a0870c ("drm/i915: Add per client max context ban limit")
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-1-chris@chris-wilson.co.uk
In particular this tries to capture for posterity some of the early
challenges we had with using the core perf infrastructure in case we
ever want to revisit adapting perf for device metrics.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-12-robert@sixbynine.org
This adds 'compute', 'compute extended', 'memory reads', 'memory writes'
and 'sampler balance' metric sets for Haswell.
The code is auto generated from an XML description of metric sets,
currently maintained in gputop, ref:
https://github.com/rib/gputop
> gputop-data/oa-*.xml
> scripts/i915-perf-kernelgen.py
$ make -C gputop-data -f Makefile.xml
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-11-robert@sixbynine.org
The maximum OA sampling frequency is now configurable via a
dev.i915.oa_max_sample_rate sysctl parameter.
Following the precedent set by perf's similar
kernel.perf_event_max_sample_rate the default maximum rate is 100000Hz
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-10-robert@sixbynine.org
Consistent with the kernel.perf_event_paranoid sysctl option that can
allow non-root users to access system wide cpu metrics, this can
optionally allow non-root users to access system wide OA counter metrics
from Gen graphics hardware.
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-9-robert@sixbynine.org
Each metric set is given a sysfs entry like:
/sys/class/drm/card0/metrics/<guid>/id
This allows userspace to enumerate the specific sets that are available
for the current system. The 'id' file contains an unsigned integer that
can be used to open the associated metric set via
DRM_IOCTL_I915_PERF_OPEN. The <guid> is a globally unique ID for a
specific OA unit register configuration that can be reliably used by
userspace as a key to lookup corresponding counter meta data and
normalization equations.
The guid registry is currently maintained as part of gputop along with
the XML metric set descriptions and code generation scripts, ref:
https://github.com/rib/gputop
> gputop-data/guids.xml
> scripts/update-guids.py
> gputop-data/oa-*.xml
> scripts/i915-perf-kernelgen.py
$ make -C gputop-data -f Makefile.xml SYSFS=1 WHITELIST=RenderBasic
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-8-robert@sixbynine.org
Gen graphics hardware can be set up to periodically write snapshots of
performance counters into a circular buffer via its Observation
Architecture and this patch exposes that capability to userspace via the
i915 perf interface.
v2:
Make sure to initialize ->specific_ctx_id when opening, without
relying on _pin_notify hook, in case ctx already pinned.
v3:
Revert back to pinning ctx upfront when opening stream, removing
need to hook in to pinning and to update OACONTROL on the fly.
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-7-robert@sixbynine.org
Adds a static OA unit, MUX + B Counter configuration for basic render
metrics on Haswell. This is auto generated from an XML
description of metric sets, currently maintained in gputop, ref:
https://github.com/rib/gputop
> gputop-data/oa-*.xml
> scripts/i915-perf-kernelgen.py
$ make -C gputop-data -f Makefile.xml SYSFS=0 WHITELIST=RenderBasic
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-6-robert@sixbynine.org
Being able to program OACONTROL from a non-privileged batch buffer is
not sufficient to be able to configure the OA unit. This was originally
allowed to help enable Mesa to expose OA counters via the
INTEL_performance_query extension, but the current implementation based
on programming OACONTROL via a batch buffer isn't able to report useable
data without a more complete OA unit configuration. Mesa handles the
possibility that writes to OACONTROL may not be allowed and so only
advertises the extension after explicitly testing that a write to
OACONTROL succeeds. Based on this; removing OACONTROL from the whitelist
should be ok for userspace.
Removing this simplifies adding a new kernel api for configuring the OA
unit without needing to consider the possibility that userspace might
trample on OACONTROL state which we'd like to start managing within
the kernel instead. In particular running any Mesa based GL application
currently results in clearing OACONTROL when initializing which would
disable the capturing of metrics.
v2:
This bumps the command parser version from 8 to 9, as the change is
visible to userspace.
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108125148.25007-1-robert@sixbynine.org
check_cmd() is checking whether a command adheres to certain
restrictions that ensure it's safe to execute within a privileged batch
buffer. Returning false implies a privilege problem, not that the
command is invalid.
The distinction makes the difference between allowing the buffer to be
executed as an unprivileged batch buffer or returning an EINVAL error to
userspace without executing anything.
In a case where userspace may want to test whether it can successfully
write to a register that needs privileges the distinction may be
important and an EINVAL error may be considered fatal.
In particular this is currently true for Mesa, which includes a test for
whether OACONTROL can be written too, but Mesa treats any error when
flushing a batch buffer as fatal, calling exit(1).
As it is currently Mesa can gracefully handle a failure to write to
OACONTROL if the command parser is disabled, but if we were to remove
OACONTROL from the parser's whitelist then the returned EINVAL would
break Mesa applications as they attempt an OACONTROL write.
This bumps the command parser version from 7 to 8, as the change is
visible to userspace.
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-4-robert@sixbynine.org
OACONTROL changes quite a bit for gen8, with some bits split out into a
per-context OACTXCONTROL register. Rename now before adding more gen7 OA
registers
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-3-robert@sixbynine.org
Adds base i915 perf infrastructure for Gen performance metrics.
This adds a DRM_IOCTL_I915_PERF_OPEN ioctl that takes an array of uint64
properties to configure a stream of metrics and returns a new fd usable
with standard VFS system calls including read() to read typed and sized
records; ioctl() to enable or disable capture and poll() to wait for
data.
A stream is opened something like:
uint64_t properties[] = {
/* Single context sampling */
DRM_I915_PERF_PROP_CTX_HANDLE, ctx_handle,
/* Include OA reports in samples */
DRM_I915_PERF_PROP_SAMPLE_OA, true,
/* OA unit configuration */
DRM_I915_PERF_PROP_OA_METRICS_SET, metrics_set_id,
DRM_I915_PERF_PROP_OA_FORMAT, report_format,
DRM_I915_PERF_PROP_OA_EXPONENT, period_exponent,
};
struct drm_i915_perf_open_param parm = {
.flags = I915_PERF_FLAG_FD_CLOEXEC |
I915_PERF_FLAG_FD_NONBLOCK |
I915_PERF_FLAG_DISABLED,
.properties_ptr = (uint64_t)properties,
.num_properties = sizeof(properties) / 16,
};
int fd = drmIoctl(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m);
Records read all start with a common { type, size } header with
DRM_I915_PERF_RECORD_SAMPLE being of most interest. Sample records
contain an extensible number of fields and it's the
DRM_I915_PERF_PROP_SAMPLE_xyz properties given when opening that
determine what's included in every sample.
No specific streams are supported yet so any attempt to open a stream
will return an error.
v2:
use i915_gem_context_get() - Chris Wilson
v3:
update read() interface to avoid passing state struct - Chris Wilson
fix some rebase fallout, with i915-perf init/deinit
v4:
s/DRM_IORW/DRM_IOW/ - Emil Velikov
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-2-robert@sixbynine.org
If we have a bad client submitting unfavourably across different
contexts, creating new ones, the per context scoring of badness
doesn't remove the root cause, the offending client.
To counter, keep track of per client context bans. Deny access if
client is responsible for more than 3 context bans in
it's lifetime.
v2: move ban check to context create ioctl (Chris)
v3: add commentary about hangs needed to reach client ban (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Now when driver has per context scoring of 'hanging badness'
and also subsequent hangs during short windows are allowed,
if there is progress made in between, it does not make sense
to expose a ban timing window as a context parameter anymore.
Let the scoring be the sole indicator for ban policy and substitute
ban period context parameter as a boolean to get/set context
bannable property.
v2: allow non root to opt into being banned (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
As hangcheck score was removed, the active decay of score
was removed also. This removed feature for hangcheck to detect
if the gpu client was accidentally or maliciously causing intermittent
hangs. Reinstate the scoring as a per context property, so that if
one context starts to act unfavourably, ban it.
v2: ban_period_secs as a gate to score check (Chris)
v3: decay in proper spot. scores as tunables (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Hangcheck state accumulation has gained more steps
along the years, like head movement and more recently the
subunit inactivity check. As the subunit sampling is only
done if the previous state check showed inactivity, we
have added more stages (and time) to reach a hang verdict.
Asymmetric engine states led to different actual weight of
'one hangcheck unit' and it was demonstrated in some
hangs that due to difference in stages, simpler engines
were accused falsely of a hang as their scoring was much
more quicker to accumulate above the hang treshold.
To completely decouple the hangcheck guilty score
from the hangcheck period, convert hangcheck score to a
rough period of inactivity measurement. As these are
tracked as jiffies, they are meaningful also across
reset boundaries. This makes finding a guilty engine
more accurate across multi engine activity scenarios,
especially across asymmetric engines.
We lose the ability to detect cross batch malicious attempts
to hinder the progress. Plan is to move this functionality
to be part of context banning which is more natural fit,
later in the series.
v2: use time_before macros (Chris)
reinstate the pardoning of moving engine after hc (Chris)
v3: avoid global state for per engine stall detection (Chris)
v4: take timeline last retirement into account (Chris)
v5: do debug print on pardoning, split out retirement timestamp (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
In order to simplify hangcheck state keeping, split hangcheck
per engine loop in three phases: state load, action, state save.
Add few more hangcheck actions to separate between seqno, head
and subunit movements. This helps to gather all the hangcheck
actions under a single switch umbrella.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Better to use num_scaler itself while printing scaler_info.
This fixes a bug of printing information for the missing
second scaler on pipe C for SKL platform.
Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479664226-22307-1-git-send-email-sunil.kamath@intel.com
When unloading the module, it is expected that we have finished
executing all requests and so the signal threads should be idle. Add a
warning in case there are any residual requests in the signaler rbtrees
at that point.
v2: We can also warn if there are any waiters
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161121110759.22896-1-chris@chris-wilson.co.uk
Currently we only clflush the scanout if it is in the CPU domain. Also
flush if we have a pending CPU clflush. We also want to treat the
dirtyfb path similar, and flush any pending writes there as well.
v2: Only send the fb flush message if flushing the dirt on flip
v3: Make flush-for-flip and dirtyfb look more alike since they serve
similar roles as end-of-frame marker.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2
Link: http://patchwork.freedesktop.org/patch/msgid/20161118211747.25197-1-chris@chris-wilson.co.uk
On the DMA mapping error path, sg may be NULL (it has already been
marked as the last scatterlist entry), and we should avoid dereferencing
it again.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e227330223 ("drm/i915: avoid leaking DMA mappings")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20161114112930.2033-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
When gathering the pages from our backing storage we expect get_pages()
to either give us our sg_table or an err ptr. However when gathering our
fake pages for stolen memory we may return NULL in the event of a
failure. To prevent any funny business we should therefore return the
proper err ptr value.
Fixes: 03ac84f183 ("drm/i915: Pass around sg_table to get_pages/put_pages backend")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479488536-6168-1-git-send-email-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Since we can retire requests from multiple paths, we cannot assume that
i915_gem_retire_requests() is the sole path on which we can transition
to gt.active_requests == 0. A consequence of this is that we would skip
the function if we had already retired all the requests and not
scheduled the idle worker.
This is fallout from changing the routine from considering active_engines
(for which it was the only consumer) to active_requests.
v2: Move kicking the idle working to i915_gem_request_retire() otherwise
we could postpone the idle callback everytime we called retire_requests
even though we did no work.
v3: We only need to move the idle work kicking!
v4: Drop the BUG_ON(!awake) as we may be called from the shrinker in the
middle of constructing a request before we have marked the device awake.
v5: Add a BUG_ON() for active_requests underflow upon retirement (Joonas)
Fixes: 28176ef4cf ("drm/i915: Reserve space in the global seqno during request allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115164620.17185-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
I tried to avoid having to track the write for every VMA by only
tracking writes to the ggtt. However, for the purposes of frontbuffer
tracking this is insufficient as we need to invalidate around writes not
just to the the ggtt but all aliased ppgtt views of the framebuffer. By
moving the critical section to the object and only doing so for
framebuffer writes we can reduce the tracking even further by only
watching framebuffers and not vma.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161116190704.5293-1-chris@chris-wilson.co.uk
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We already have an i915_address_space_init, so for symmetry we should
also have a _fini, plus we already open code it twice. This then also
fixes a bug where we leak the timeline for the ggtt vm.
v2: don't forget about the struct_mutex for the ggtt path.
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161117210411.14044-1-chris@chris-wilson.co.uk
We should never be called via obj->ops->release() on anything other than
a fully formed stolen object, so raise that to an assert. In the process
tidy up a comment and variable no longer used outside of a conditional
BUG.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161117155846.4631-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Kernel pointer does not sound like an useful thing to log and
pipe name is already contained in the crtc name.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We don't spam the debug when we create a normal object, nor when we
allocate their pages. Yet we do for stolen objects, and since these are
quite frequently used (at least once per context), the resulting spam
floods the dmesg in CI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We use DRM_DEBUG() when reporting on user actions, to try and keep
intentional errors out of the CI dmesg. Demote the debug from
i915_gem_open() similarly so that it is only apparent with drm.debug & 1
like its brethren.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161109104507.21228-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
It looks to me skl_update_scaler will already log interesting
debug messages when the state transitions or there is an error.
In this case it feels we can remove the two unconditional
debug messages which happen immediately before calling
skl_update_scaler. This way we get rid of the sole debug
message when switching virtual terminals for example.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479376805-5087-1-git-send-email-tvrtko.ursulin@linux.intel.com
Plus a trickle of function prototype changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
And as usual a little bit of cascaded function prototype changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
A bunch of source files with just a few instances of the
incorrect INTEL_INFO use.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
And a little bit of function prototype changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
And a little bit of function prototype changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
And a little bit of cascaded function prototype changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
And a little bit of cascaded function prototype changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
And a little bit of cascaded function prototype changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Started with removing INTEL_INFO(dev) and cascaded into a quite
big trickle of function prototype changes. Still, I think it is
for the better.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Plus a small cascade of function prototype changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
From Zhenyu Wang:
gvt-next-2016-11-17
- Fix lock order issue found in guest stress test
- Fix several MMIO handlers to correct behavior
- Fix crash for vgpu execlist reset and memleak
- Fix a possible conflict for unresolved vfio mdev dependency
- other misc fixes
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tvrtko needs
commit b3c11ac267
Author: Eric Engestrom <eric@engestrom.ch>
Date: Sat Nov 12 01:12:56 2016 +0000
drm: move allocation out of drm_get_format_name()
to be able to apply his patches without conflicts.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Commit 0dd356bb6f ("drm/i915: Eliminate Gen9 special case")
accidentaly dropped a MMIO range between 0xc000 to 0xcfff out
of the blitter forcewake domain. Fix it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 0dd356bb6f ("drm/i915: Eliminate Gen9 special case")
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479373363-16528-1-git-send-email-tvrtko.ursulin@linux.intel.com
It has been suggested that having per-plane modifiers is making life
more difficult for userspace, so let's just retire modifier[1-3] and
use modifier[0] to apply to the entire framebuffer.
Obviosuly this means that if individual planes need different tiling
layouts and whatnot we will need a new modifier for each combination
of planes with different tiling layouts.
For a bit of extra backwards compatilbilty the kernel will allow
non-zero modifier[1+] but it require that they will match modifier[0].
This in case there's existing userspace out there that sets
modifier[1+] to something non-zero with planar formats.
Mostly a cocci job, with a bit of manual stuff mixed in.
@@
struct drm_framebuffer *fb;
expression E;
@@
- fb->modifier[E]
+ fb->modifier
@@
struct drm_framebuffer fb;
expression E;
@@
- fb.modifier[E]
+ fb.modifier
Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Cc: dczaplejewicz@collabora.co.uk
Suggested-by: Kristian Høgsberg <hoegsberg@gmail.com>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479295996-26246-1-git-send-email-ville.syrjala@linux.intel.com
This is essentially the same thing as duplicating DIDL now that the
connector list has the ACPI device IDs.
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Tested-by: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/ea0a052fa99a4cb56b559a815866434bcfef853d.1479295490.git.jani.nikula@intel.com
The graphics driver is supposed to define the DIDL, which are used for
_DOD, not the BIOS. Restore that behaviour.
This is basically a revert of
commit 3143751ff5
Author: Zhang Rui <rui.zhang@intel.com>
Date: Mon Mar 29 15:12:16 2010 +0800
drm/i915: set DIDL using the ACPI video output device _ADR method return.
which went out of its way to cater to a specific BIOS, setting up DIDL
based on _ADR method. Perhaps that approach worked on that specific
machine, but on the machines I checked the _ADR method invents the
device identifiers out of thin air if DIDL has not been set. The source
for _ADR is also supposed to be the DIDL set by the driver, not the
other way around.
With this, we'll also limit the number of outputs to what the driver
actually has.
A side effect of this change is that the DIDL, and by proxy CADL, will
be initialized in the order of the connector list. That, in turn, has
internal panels in front, ensuring they're included in the DIDL and CADL
lists. Hopefully this ensures the BIOS does not block backlight hotkey
events, thinking the internal panel is off.
v2: do not set ACPI_DEVICE_ID_SCHEME in the device id (Peter Wu)
v3: Rebase
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Tested-by: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-and-tested-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9660d29cf310c17bbf4d58c0e09d5b047446e2d5.1479295490.git.jani.nikula@intel.com
For a single_port_submission context, GVT expects that it can only be
submitted to port 0, and there shouldn't be any other context in port 1
at the same time. This is required by GVT-g context to have an opportunity
to save/restore some non-hw context render registers.
This patch is to workaround GVT-g.
v2: optimized code by following Chris's advice, and added more comments to
explain the patch.
v3: followed the coding style.
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479305104-17049-1-git-send-email-min.he@intel.com
Instead of partially depending on vfio pin/unpin pages interface if
mdev is available, which would result in failure if vfio is not
on. But replace with a wrapper which need to be fixed till mdev
support got fully merged.
Cc: Jike Song <jike.song@intel.com>
Cc: Xiaoguang Chen <xiaoguang.chen@intel.com>
Reviewed-by: Xiaoguang Chen <Xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We no longer cater for pre-production revisions of Skylake.
Fixes: d4362225e8 ("drm/i915/gvt: update misc ctl regs base on stepping info")
Cc: Ping Gao <ping.a.gao@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: <intel-gfx@lists.freedesktop.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Avoid requiring struct_mutex for exclusive access to the temporary
dfs_link inside the i915_dependency as not all callers may want to touch
struct_mutex. So rather than force them to take a highly contended
lock, introduce a local lock for the execlists schedule operation.
Reported-by: David Weinehall <david.weinehall@linux.intel.com>
Fixes: 9a151987d7 ("drm/i915: Add execution priority boosting for mmioflips")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161116152721.11053-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Decoupled MMIO is an alternative way to access forcewake domain
registers, which requires less cycles for a single read/write and
avoids frequent software forcewake.
This certainly gives advantage over the forcewake as this new
mechanism “decouples” CPU cycles and allow them to complete even
when GT is in a CPD (frequency change) or C6 state.
This can co-exist with forcewake and we will continue to use forcewake
as appropriate. E.g. 64-bit register writes to avoid writing 2 dwords
separately and land into funny situations.
v2:
- Moved platform check out of the function and got rid of duplicate
functions to find out decoupled power domain (Chris)
- Added a check for forcewake already held and skipped decoupled
access (Chris)
- Skipped writing 64 bit registers through decoupled MMIO (Chris)
v3:
- Improved commit message with more info on decoupled mmio (Tvrtko)
- Changed decoupled operation to enum and used u32 instead of
uint_32 data type for register offset (Tvrtko)
- Moved HAS_DECOUPLED_MMIO to device info (Tvrtko)
- Added lookup table for converting fw_engine to pd_engine (Tvrtko)
- Improved __gen9_decoupled_read and __gen9_decoupled_write
routines (Tvrtko)
v4:
- Fixed alignment and variable names (Chris)
- Write GEN9_DECOUPLED_REG0_DW1 register in just one go (Zhe Wang)
v5:
- Changed HAS_DECOUPLED_MMIO() argument name to dev_priv (Tvrtko)
- Sanitize info->had_decoupled_mmio at init (Chris)
Signed-off-by: Zhe Wang <zhe1.wang@intel.com>
Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479230360-22395-1-git-send-email-praveen.paneri@intel.com
With the s390 special case of a yielding cpu_relax() implementation gone,
we can now remove all users of cpu_relax_lowlatency() and replace them
with cpu_relax().
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1477386195-32736-5-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT
port information apparently didn't survive the reality of buggy VBTs.
In this particular case we have a machine with a natice HDMI port, but
the VBT tells us it's a DP++ port based on its capabilities.
The dvo_port information in VBT does claim that we're dealing with a
HDMI port though, but we have other machines which do the same even
when they actually have DP++ ports. So that piece of information alone
isn't sufficient to tell the two apart.
After staring at a bunch of VBTs from various machines, I have to
conclude that the only other semi-reliable clue we can use is the
presence of the AUX channel in the VBT. On this particular machine
AUX channel is specified as zero, whereas on some of the other machines
which listed the DP++ port as HDMI have a non-zero AUX channel.
I've also seen VBTs which have dvo_port a DP but have a zero AUX
channel. I believe those we need to treat as DP ports, so we'll limit
the AUX channel check to just the cases where dvo_port is HDMI.
If we encounter any more serious failures with this heuristic I think
we'll have to have to throw it out entirely. But that could mean that
there is a risk of type 1 DVI dongle users getting greeted by a
black screen, so I'd rather not go there unless absolutely necessary.
v2: Remove the duplicate PORT_A check (Daniel)
Fix some typos in the commit message
Cc: Daniel Otero <daniel.otero@outlook.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Otero <daniel.otero@outlook.com>
Fixes: d61992565b ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 7a17995a3d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch will fix warning log print during command scan caused by
empty workload (ring head equals tail). This patch avoid going into
real scan process if workload is empty. It's guest's responsibility
to make sure if an empty workload is proper to submit to HW.
[v2] modify the patch description. It's a fix, not a w/a.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
By popular DRM demand, introduce mutex_trylock_recursive() to fix up the
two GEM users.
Without this it is very easy for these drivers to get stuck in
low-memory situations and trigger OOM. Work is in progress to remove the
need for this in at least i915.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jason Low <jason.low2@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Terry Rudd <terry.rudd@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <Will.Deacon@arm.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
dev_priv->hw_ddb is only used by skl_update_crtcs, but the ddb
allocation for each pipe is calculated in crtc_state.
We can rid of the global member by looking at crtc_state.
Do this by saving all active old ddb allocations from the old crtc_state
in an array, and then point them to the new allocation every time we update
a crtc.
This will allow us to keep track of the intermediate ddb allocations,
which is what hw_ddb was previously used for. With hw_ddb gone all
SKL-style watermark values are properly maintained only in crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-5-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
This is the last bit required for making nonblocking modesets work
correctly. The state in intel_crtc->hw_ddb is updated in the
nonblocking part of a nonblocking commit.
This means that even attempting a commit before a nonblocking modeset
completes will fail, because intel_crtc->hw_ddb still has stale values.
The stale values are 0 if the crtc is being enabled resulting in a
failure during atomic check, but it may also result in double use of
ddb allocations.
Fix this by explicitly copying the ddb allocation from the old state.
This has to be done explicitly, because a modeset that doesn't change
active pipes, or a modeset converted to a fastset will will clear the
current state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-4-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
The watermark updates for SKL style watermarks are no longer done
in the plane callbacks, but are now called in a separate watermark
update function that's called during the same vblank evasion,
before the plane updates.
This also gets rid of the global skl_results, which was required for
keeping track of the current atomic commit.
Changes since v1:
- Move line unwrap to correct patch. (Lyude)
- Make sure we don't regress ILK watermarks. (Matt)
- Rephrase commit message. (Matt)
Changes since v2:
- Fix disable watermark check to use the correct way to determine single
step watermark support.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-3-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Small whitespace fix in skl_initial_wm]
Allow the driver to write watermarks during atomic evasion.
This will make it possible to write the watermarks in a cleaner
way on gen9+.
intel_atomic_state is not used here yet, but will be used when
we program all watermarks as a separate step during evasion.
This also writes linetime all the time, while before it was only
done during plane updates. This looks like this could be a bugfix,
but I'm not sure what it affects.
Changes since v1:
- Add comment about atomic evasion to commit message.
- Unwrap I915_WRITE call. (Lyude)
Changes since v2:
- Rename atomic_evade_watermarks to atomic_update_watermarks. (Ville)
- Add line wraps where appropriate, fix grammar in commit message. (Matt)
Changes since v3:
- Actually fix commit message. (Matt)
- Line wrap calls to watermark update functions. (Matt)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-2-git-send-email-maarten.lankhorst@linux.intel.com
Commit 6b5e90f58c ("drm/i915/scheduler: Boost priorities for flips")
added priority boosting for the modern atomic pageflips (and modesets),
but we should do the same for existing users of mmioflips (we don't yet
need to consider csflips as they are not used by execlists and so do not
have any support for a scheduler).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115092249.18356-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Boost the priority of any rendering required to show the next pageflip
as we want to avoid missing the vblank by being delayed by invisible
workload. We prioritise avoiding jank and jitter in the GUI over
starving background tasks.
v2: Descend dma_fence_array when boosting priorities.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-10-chris@chris-wilson.co.uk
In order to support userspace defining different levels of importance to
different contexts, and in particular the preferred order of execution,
store a priority value on each context. By default, the kernel's
context, which is used for idling and other background tasks, is given
minimum priority (i.e. all user contexts will execute before the kernel).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-9-chris@chris-wilson.co.uk
Track the priority of each request and use it to determine the order in
which we submit requests to the hardware via execlists.
The priority of the request is determined by the user (eventually via
the context) but may be overridden at any time by the driver. When we set
the priority of the request, we bump the priority of all of its
dependencies to match - so that a high priority drawing operation is not
stuck behind a background task.
When the request is ready to execute (i.e. we have signaled the submit
fence following completion of all its dependencies, including third
party fences), we put the request into a priority sorted rbtree to be
submitted to the hardware. If the request is higher priority than all
pending requests, it will be submitted on the next context-switch
interrupt as soon as the hardware has completed the current request. We
do not currently preempt any current execution to immediately run a very
high priority request, at least not yet.
One more limitation, is that this is first implementation is for
execlists only so currently limited to gen8/gen9.
v2: Replace recursive priority inheritance bumping with an iterative
depth-first search list.
v3: list_next_entry() for walking lists
v4: Explain how the dfs solves the recursion problem with PI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-8-chris@chris-wilson.co.uk
The scheduler needs to know the dependencies of each request for the
lifetime of the request, as it may choose to reschedule the requests at
any time and must ensure the dependency tree is not broken. This is in
additional to using the fence to only allow execution after all
dependencies have been completed.
One option was to extend the fence to support the bidirectional
dependency tracking required by the scheduler. However the mismatch in
lifetimes between the submit fence and the request essentially meant
that we had to build a completely separate struct (and we could not
simply reuse the existing waitqueue in the fence for one half of the
dependency tracking). The extra dependency tracking simply did not mesh
well with the fence, and keeping it separate both keeps the fence
implementation simpler and allows us to extend the dependency tracking
into a priority tree (whilst maintaining support for reordering the
tree).
To avoid the additional allocations and list manipulations, the use of
the priotree is disabled when there are no schedulers to use it.
v2: Create a dedicated slab for i915_dependency.
Rename the lists.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-7-chris@chris-wilson.co.uk
Defer the transfer from the client's timeline onto the execution
timeline from the point of readiness to the point of actual submission.
For example, in execlists, a request is finally submitted to hardware
when the hardware is ready, and only put onto the hardware queue when
the request is ready. By deferring the transfer, we ensure that the
timeline is maintained in retirement order if we decide to queue the
requests onto the hardware in a different order than fifo.
v2: Rebased onto distinct global/user timeline lock classes.
v3: Play with the position of the spin_lock().
v4: Nesting finally resolved with distinct sw_fence lock classes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-4-chris@chris-wilson.co.uk
In order to support deferred scheduling, we need to differentiate
between when the request is ready to run (i.e. the submit fence is
signaled) and when the request is actually run (a new execute fence).
This is typically split between the request itself wanting to wait upon
others (for which we use the submit fence) and the CPU wanting to wait
upon the request, for which we use the execute fence to be sure the
hardware is ready to signal completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-3-chris@chris-wilson.co.uk
In order to simplify the lockdep annotation, as they become more complex
in the future with deferred execution and multiple paths through the
same functions, create a separate lockclass for the user timeline and
the hardware execution timeline.
We should only ever be locking the user timeline and the execution
timeline in parallel so we only need to create two lock classes, rather
than a separate class for every timeline.
v2: Rename the lock classes to be more consistent with other lockdep.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-2-chris@chris-wilson.co.uk
Localise the static struct lock_class_key to the caller of
i915_sw_fence_init() so that we create a lock_class instance for each
unique sw_fence rather than all sw_fences sharing the same
lock_class. This eliminate some lockdep false positive when using fences
from within fence callbacks.
For the relatively small number of fences currently in use [2], this adds
160 bytes of unused text/code when lockdep is disabled. This seems
quite high, but fully reducing it via ifdeffery is also quite ugly.
Removing the #fence strings saves 72 bytes with just a single #ifdef.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-1-chris@chris-wilson.co.uk
On pre-gen4 we connect plane A to pipe B and vice versa to get an FBC
capable plane feeding the LVDS port by default. We have the logic for
the plane swapping duplicated in many places. Let's remove a bit of the
duplication by having the crtc look up the thing from the primary plane.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478616439-10150-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The primary and sprite planes on CHV pipe B support horizontal
mirroring. Expose it to the world.
Sadly the hardware ignores the mirror bit when the rotate bit is
set, so we'll have to reject the 180+X case.
v2: Drop the BIT()
v3: Pass dev_priv instead of dev to IS_CHERRYVIEW()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-4-git-send-email-ville.syrjala@linux.intel.com
Move the plane control register rotation setup away from the
coordinate munging code. This will result in neater looking
code once we add reflection support for CHV.
v2: Drop the BIT(), drop some usless parens,
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-3-git-send-email-ville.syrjala@linux.intel.com
Using == to check for 180 degree rotation only works as long as the
reflection bits aren't set. That will change soon enough for CHV, so
let's stop doing things the wrong way.
v2: Drop the BIT()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-2-git-send-email-ville.syrjala@linux.intel.com
It only has two checks now, so it makes sense to just move the code to
the caller.
Also take this opportunity to make no_fbc_reason make more sense: now
we'll only list "no suitable CRTC for FBC" instead of maybe giving a
reason why the last CRTC we checked was not selected, and we'll more
consistently set the reason (e.g., if no primary planes are visible).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-5-git-send-email-paulo.r.zanoni@intel.com
When supplying a view to vma_compare() it is required that the supplied
i915_address_space is the global GTT. I tested the VMA instead (which is
the current position in the rbtree and maybe from any address space).
(This reapplies commit a44342acde ("drm/i915: Fix test on inputs for
vma_compare()") as it was lost in the vma split)
Reported-by: Matthew Auld <matthew.auld@intel.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98579
Fixes: db6c2b4151 ("drm/i915: Store the vma in an rbtree...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161103200852.23431-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: b42fe9ca0a ("drm/i915: Split out i915_vma.c")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The previous spec version said "double Ytile planes minimum lines",
and I interpreted this as referring to what the spec calls "Y tile
minimum", but in fact it was referring to what the spec calls "Minimum
Scanlines for Y tile". I noticed that Mahesh Kumar had a different
interpretation, so I sent and email to the spec authors and got
clarification on the correct meaning. Also, BSpec was updated and
should be clear now.
Fixes: ee3d532fcb ("drm/i915/gen9: unconditionally apply the memory bandwidth WA")
Cc: stable@vger.kernel.org
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478636531-6081-1-git-send-email-paulo.r.zanoni@intel.com
My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT
port information apparently didn't survive the reality of buggy VBTs.
In this particular case we have a machine with a natice HDMI port, but
the VBT tells us it's a DP++ port based on its capabilities.
The dvo_port information in VBT does claim that we're dealing with a
HDMI port though, but we have other machines which do the same even
when they actually have DP++ ports. So that piece of information alone
isn't sufficient to tell the two apart.
After staring at a bunch of VBTs from various machines, I have to
conclude that the only other semi-reliable clue we can use is the
presence of the AUX channel in the VBT. On this particular machine
AUX channel is specified as zero, whereas on some of the other machines
which listed the DP++ port as HDMI have a non-zero AUX channel.
I've also seen VBTs which have dvo_port a DP but have a zero AUX
channel. I believe those we need to treat as DP ports, so we'll limit
the AUX channel check to just the cases where dvo_port is HDMI.
If we encounter any more serious failures with this heuristic I think
we'll have to have to throw it out entirely. But that could mean that
there is a risk of type 1 DVI dongle users getting greeted by a
black screen, so I'd rather not go there unless absolutely necessary.
v2: Remove the duplicate PORT_A check (Daniel)
Fix some typos in the commit message
Cc: Daniel Otero <daniel.otero@outlook.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Otero <daniel.otero@outlook.com>
Fixes: d61992565b ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The term "preliminary hardware support" has always caused confusion both
among users and developers. It has always been about preliminary driver
support for new hardware, and not so much about preliminary hardware. Of
course, initially both the software and hardware are in early stages,
but the distinction becomes more clear when the user picks up production
hardware and an older kernel to go with it, with just the early support
we had for the hardware at the time the kernel was released. The user
has to specifically enable the alpha quality *driver* support for the
hardware in that specific kernel version.
Rename preliminary_hw_support to alpha_support to emphasize that the
module parameter, config option, and flag are about software, not about
hardware. Improve the language in help texts and debug logging as well.
This appears to be a good time to do the change, as there are currently
no platforms with preliminary^W alpha support.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477909108-18696-1-git-send-email-jani.nikula@intel.com
Since there's no opregion in vgpu so clear the opregion bits in case
guest access it.
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add more MMIO regs with command access flag for whitelist as they are
accessed by command.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Static checker gave warning on:
drivers/gpu/drm/i915/gvt/edid.c:506 intel_gvt_i2c_handle_aux_ch_write()
warn: odd binop '0x0 & 0xff'
We try to return ACK for I2C reply which is defined with 0. Remove
bit shift which caused misleading bit op.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Gvt gdrst handler handle_device_reset() invoke function
setup_vgpu_mmio() to reset mmio status. In this case,
the virtual mmio memory has been allocated already. The
new allocation just cause old mmio memory leakage.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We initiate vgpu->workload_q_head via for_each_engine
macro which may skip unavailable engines. So we should
follow this rule anywhere. The function
intel_vgpu_reset_execlist is not aware of this. Kernel
crash when touch a uninitiated vgpu->workload_q_head[x].
Let's fix it by using for_each_engine_masked and skip
unavailable engine ID. Meanwhile rename ring_bitmap to
general name engine_mask.
v2: remove unnecessary engine activation check (zhenyu)
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Emulate right behavior for tlb_control, set to ZERO upon write.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It's a classical abba type deadlock when using 2 mutex objects, which
are gvt.lock(a) and drm.struct_mutex(b). Deadlock happens in threads:
1. intel_gvt_create/destroy_vgpu: P(a)->P(b)
2. workload_thread: P(b)->P(a)
Fix solution is align the lock acquire sequence in both threads. This
patch choose to adjust the sequence in workload_thread function.
This fixed lockup symptom for guest-reboot stress test.
v2: adjust sequence in workload_thread based on zhenyu's suggestion.
adjust sequence in create/destroy_vgpu function.
v3: fix to still require struct_mutex for dispatch_workload()
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
[zhenyuw: fix unused variables warnings.]
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The function's behaviour was changed in 90844f0004, without changing
its signature, causing people to keep using it the old way without
realising they were now leaking memory.
Rob Clark also noticed it was also allocating GFP_KERNEL memory in
atomic contexts, breaking them.
Instead of having to allocate GFP_ATOMIC memory and fixing the callers
to make them cleanup the memory afterwards, let's change the function's
signature by having the caller take care of the memory and passing it to
the function.
The new parameter is a single-field struct in order to enforce the size
of its buffer and help callers to correctly manage their memory.
Fixes: 90844f0004 ("drm: make drm_get_format_name thread-safe")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com> (vmwgfx)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161112011309.9799-1-eric@engestrom.ch
When we release the shmem backing storage, we make sure that the pages
are coherent with the cpu cache. However, our clflush routine was
skipping the flush as the object had no pages at release time. Fix this by
explicitly flushing the sg_table we are decoupling.
Fixes: 03ac84f183 ("drm/i915: Pass around sg_table to get_pages/put_pages backend")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161111145809.9701-2-chris@chris-wilson.co.uk
After this patch only conversion of INTEL_INFO(p)->gen to
INTEL_GEN(dev_priv) remains before the __I915__ macro can
be removed.
v2: Tidy vlv_compute_wm. (David Weinehall)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.
v2: Keep original order. (Ville Syrjala)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
As a side product, had to split two other files;
- i915_gem_fence_reg.h
- i915_gem_object.h (only parts that needed immediate untanglement)
I tried to move code in as big chunks as possible, to make review
easier. i915_vma_compare was moved to a header temporarily.
v2:
- Use i915_gem_fence_reg.{c,h}
v3:
- Rebased
v4:
- Fix building when DEBUG_GEM is enabled by reordering a bit.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478861034-30643-1-git-send-email-joonas.lahtinen@linux.intel.com
Once we've determined that the sink is MST capable we never end up
running through the full detect cycle again, despite getting HPDs.
Fix tht by ripping out the incorrect piece of code responsible.
This got broken when I moved the long HPD handling to the ->detect()
hook, but failed to remove the leftover code.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Rui Tiago Matos <tiagomatos@gmail.com>
Tested-by: Rui Tiago Matos <tiagomatos@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
References: https://bugs.freedesktop.org/show_bug.cgi?id=98306
Fixes: 1015811609 ("drm/i915: Move long hpd handling into the hotplug work")
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477057478-29328-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 1aab956c7b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the passed in plane_state instead of plane->state in
vlv_update_plane(). Currently the two are one and the same, but if we
start queuing up multiple plane updates they might not be.
Looks like this was rebase fail on my part.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 8d0deca8c6 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 11df4d95b3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On LLC, or even snooped, machines rendering via the GPU ends up in the CPU
cache. This cacheline dirt also needs to be flushed to main memory when
moving to an incoherent domain, such as the display's scanout engine.
Mostly, this happens because either the object is marked as dirty from
its first use or is avoided by setting the object into the display
domain from the start.
v2: Treat WT as not requiring a clflush prior to use on the display
engine as well.
Fixes: 0f71979ab7 ("drm/i915: Performed deferred clflush inside set-cache-level")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95414
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk
(cherry picked from commit 7aa6ca61ee)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- better atomic state debugging from Rob
- fence prep from gustavo
- sumits flushed out his backlog of pending dma-buf/fence patches from
various people
- drm_mm leak debugging plus trying to appease Kconfig (Chris)
- a few misc things all over
* tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits)
drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT
drm/i915: Restrict DRM_DEBUG_MM automatic selection
drm: Restrict stackdepot usage to builtin drm.ko
drm/msm: module param to dump state on error irq
drm/msm/mdp5: add atomic_print_state support
drm/atomic: add debugfs file to dump out atomic state
drm/atomic: add new drm_debug bit to dump atomic state
drm: add helpers to go from plane state to drm_rect
drm: add helper for printing to log or seq_file
drm: helper macros to print composite types
reservation: revert "wait only with non-zero timeout specified (v3)" v2
drm/ttm: fix ttm_bo_wait
dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)
dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)
drm/amdgpu: add the interface of waiting multiple fences (v4)
dma-buf: return index of the first signaled fence (v2)
MAINTAINERS: update Sync File Framework files
dma-buf/sw_sync: put fence reference from the fence creation
dma-buf/sw_sync: mark sync_timeline_create() static
drm: Add stackdepot include for DRM_DEBUG_MM
...
Zhenyu Wang writes:
gvt-next-kvmgt-framework
This adds initial KVMGT framework based on GVT-g MPT(Mediated Passthrough) interface.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
At the moment we allocate enough sg table entries assuming we
will not be able to do any coalescing. But since in practice
we most often can, and more so very effectively, this ends up
wasting a lot of memory.
A simple and effective way of trimming the over-allocated
entries is to copy the table over to a new one allocated to the
exact size.
Experiments on my freshly logged and idle desktop (KDE) showed
that by doing this we can save approximately 1 MiB of RAM, or
when running a typical benchmark like gl_manhattan I have
even seen a 6 MiB saving.
More complicated techniques such as only copying the last used
page and freeing the rest are left to the reader.
v2:
* Update commit message.
* Use temporary sg_table on stack. (Chris Wilson)
v3:
* Commit message update.
* Comment added.
* Replace memcpy with copy assignment.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478704423-7447-1-git-send-email-tvrtko.ursulin@linux.intel.com
KVMGT is the MPT implementation based on VFIO/KVM. It provides
a kvmgt_mpt ops to gvt for vGPU access mediation, e.g. to
mediate and emulate the MMIO accesses, to inject interrupts
to vGPU user, to intercept the GTT writing and replace it with
DMA-able address, to write-protect guest PPGTT table for
shadowing synchronization, etc. This patch provides the MPT
implementation for GVT, not yet functional due to theabsence
of mdev.
It's built as kvmgt.ko, depends on vfio.ko, kvm.ko and mdev.ko,
and being required by i915.ko. To not introduce hard dependency
in i915.ko, we used indirect symbol reference. But that means
users have to include kvmgt.ko into init ramdisk if their
i915.ko is included.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
There are currently 4 methods in intel_gvt_io_emulation_ops
to emulate CFG/MMIO reading/writing for intel vGPU. A possibly
better scope is: add 3 more methods for vgpu create/destroy/reset
respectively, and rename the ops to 'intel_gvt_ops', then pass
it to the MPT module (say the future kvmgt) to use: they are
all methods for external usage.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Hypervisors are different, the MPT ops is a only superset of
all possibly supported hypervisors. There might be other way
out of the MPT to achieve same target. e.g. vfio-based kvmgt
won't provide map_gfn_to_mfn method to establish guest EPT
mapping for aperture, since it will be done in QEMU/KVM, MMIO
is also trapped elsewhere, etc.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
GVT host needs init/exit hooks to do some initialization/cleanup
work, e.g.: vfio mdev host device register/unregister.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Current GVT contains some obsolete logic originally cooked to
support the old, non-vfio kvmgt, which is actually workarounds.
We don't support that anymore, so it's safe to remove it and
make a better framework.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
By providing predefined vGPU types, users can choose which type a vgpu
to create and use, without specifying detailed parameters.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
kmap_atomic doesn't allow sleep until unmapped. However,
it's necessary to allow sleep during reading/writing guest
memory, so use kmap instead.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
On guest writing a PPGTT entry, if it contains value and the old
entry is valid, gvt will read it and find & free the corresponding
old data for it. However, with the KVM write protection provided
by page_track, the guest entry will be written with new value
before gvt handling. To avoid that, we should use the shadow
entry instead.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When we need to reset the global seqno on wraparound, we have to wait
until the current rbtrees are drained (or otherwise the next waiter will
be out of sequence). The current mechanism to kick and spin until
complete, may exit too early as it would break if the target thread was
currently running. Instead, we must wake up the threads, but keep
spinning until the trees have been deleted.
In order to appease Tvrtko, busy spin rather than yield().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108143719.32215-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
All of this state should be updated as soon as possible. It shouldn't be
done later because then future updates may not depend on it.
Changes since v1:
- Move the modeset update to before drm_atomic_state_get. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-10-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
drm_select_eld requires mode_config.mutex and connection_mutex
because it looks at the connector list and at the legacy encoders.
This is not required, because when we call audio_codec_enable we know
which connector it was called for, so pass the state.
This also removes having to look at crtc->config.
Changes since v1:
- Use intel_crtc->pipe instead of drm_crtc_index. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-8-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The newly added assert_kernel_context_is_current introduces a warning
when built with W=1:
drivers/gpu/drm/i915/i915_gem.c: In function ‘assert_kernel_context_is_current’:
drivers/gpu/drm/i915/i915_gem.c:4417:63: error: suggest braces around empty body in an ‘else’ statement [-Werror=empty-body]
Changing the GEM_BUG_ON() macro from an empty definition to "do { } while (0)"
makes the macro more robust to use and avoids the warning.
Fixes: 3033acab07 ("drm/i915: Queue the idling context switch after all other timelines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108135834.2166677-1-arnd@arndb.de
gvt-next-2016-11-07
- Fix regression from e95433c73a
- Some MMIO handler fixes
- Add better handling for guest reset control
- stratch page table tree for shadow ppgtt
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The code to determine the primary plane offset for gen2/3 looks
different than the code for gen4+, but in fact it's doing the same
thing. Let's make it uniform. Allows us to eliminate the 'obj' from
the list of local variables as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Use the passed in plane_state instead of plane->state in
vlv_update_plane(). Currently the two are one and the same, but if we
start queuing up multiple plane updates they might not be.
Looks like this was rebase fail on my part.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 8d0deca8c6 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We always flush the chipset prior to executing with the GPU, so we can
skip the flush during ordinary domain management.
This should help mitigate some of the potential performance regressions,
but likely trivial, from doing the flush unconditionally before execbuf
introduced in commit dcd79934b0 ("drm/i915: Unconditionally flush any
chipset buffers before execbuf")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161106130001.9509-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Get rid of sloppy inline functions now that we don't have more users:
i915_gem_request_get_seqno
i915_gem_request_get_engine
v2:
- request->engine is always non-NULL (Chris)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478589108-3702-1-git-send-email-joonas.lahtinen@linux.intel.com
A frequent issue that arises on shutdown is the drm_mm range manager
complaining of a leak. To aide debugging those, drm can now track the
allocation callsite and print those for the leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161029184214.17329-2-chris@chris-wilson.co.uk
On LLC, or even snooped, machines rendering via the GPU ends up in the CPU
cache. This cacheline dirt also needs to be flushed to main memory when
moving to an incoherent domain, such as the display's scanout engine.
Mostly, this happens because either the object is marked as dirty from
its first use or is avoided by setting the object into the display
domain from the start.
v2: Treat WT as not requiring a clflush prior to use on the display
engine as well.
Fixes: 0f71979ab7 ("drm/i915: Performed deferred clflush inside set-cache-level")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95414
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk
Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)
v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.
v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well
Reported-by: Luis Botello <luis.botello.ortega@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d53 ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 767a222e47)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Norbert Preining <preining@logic.at>
Tested-by: Norbert Preining <preining@logic.at>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 03af84fe7f ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a83a ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 0ef723cbce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.
v2: Move drm_device to drm_i915_private conversion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: stable@vger.kernel.org
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com
(cherry picked from commit 9c75402418)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."
Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.
v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
Retain the set cdclk across modesets (Ville)
Cc: stable@vger.kernel.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com
(cherry picked from commit b30ce9e055)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
One of the CI machines began to run into issues with the hpd poller
suddenly waking up in the midst of the late suspend phase. It looks like
this is getting caused by the fact we now deinitialize power wells in
late suspend, which means that intel_hpd_poll_init() gets called in late
suspend causing polling to get re-enabled. So, when deinitializing power
wells on valleyview we now refrain from enabling polling in the midst of
suspend.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040
Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Petry Latvala <petri.latvala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com
(cherry picked from commit b64b540931)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.
I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.
v2: Include a commit message, include a debug message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
(cherry picked from commit e4ab73a132)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During resume we will reset the SW/HW tracking for each ring head/tail
pointers and so are not prepared to replay any pending requests (as
opposed to GPU reset time). Add an assert for this both to the suspend
and the resume code.
v2:
- Check for ELSP port idle already during suspend and check !gt.awake
during resume. (Chris)
v3:
- Move the !gt.awake check to i915_gem_resume().
v4:
- s/intel_lr_engines_idle/intel_execlists_idle/ (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-4-git-send-email-imre.deak@intel.com
We assume that the GPU is idle once receiving the seqno via the last
request's user interrupt. In execlist mode the corresponding context
completed interrupt can be delayed though and until this latter
interrupt arrives we consider the request to be pending on the ELSP
submit port. This can cause a problem during system suspend where this
last request will be seen by the resume code as still pending. Such
pending requests are normally replayed after a GPU reset, but during
resume we reset both SW and HW tracking of the ring head/tail pointers,
so replaying the pending request with its stale tail pointer will leave
the ring in an inconsistent state. A subsequent request submission can
lead then to the GPU executing from uninitialized area in the ring
behind the above stale tail pointer.
Fix this by making sure any pending request on the ELSP port is
completed before suspending. I used a polling wait since the completion
time I measured was <1ms and since normally we only need to wait during
system suspend. GPU idling during runtime suspend is scheduled with a
delay (currently 50-100ms) after the retirement of the last request at
which point the context completed interrupt must have arrived already.
The chance of this bug was increased by
commit 1c777c5d1d
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Oct 12 17:46:37 2016 +0300
drm/i915/hsw: Fix GPU hang during resume from S3-devices state
but it could happen even without the explicit GPU reset, since we
disable interrupts afterwards during the suspend sequence.
v2:
- Do an unlocked poll-wait first. (Chris)
v3-4:
- s/intel_lr_engines_idle/intel_execlists_idle/ and move
i915.enable_execlists check to the new helper. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98470
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-3-git-send-email-imre.deak@intel.com
There is a small race where a new request can be submitted and retired
after the idle worker started to run which leads to idling the GPU too
early. Fix this by deferring the idling to the pending instance of the
worker.
This scenario was pointed out by Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-2-git-send-email-imre.deak@intel.com
Atm, in case an idle work handler is already pending but haven't yet
started to run, retiring a new request will not extend the active period
as required, rather simply leaves the pending idle work to be scheduled
at the original expiration time. This may lead to idling the GPU too
early. Fix this by using the delayed-work scheduler alternative which
makes sure the handler's expiration time is extended in this case.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Requested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-1-git-send-email-imre.deak@intel.com
Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)
v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.
v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well
Reported-by: Luis Botello <luis.botello.ortega@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d53 ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com
When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Norbert Preining <preining@logic.at>
Tested-by: Norbert Preining <preining@logic.at>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 03af84fe7f ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a83a ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
All the unused entries in the page table tree(PML4E->PDPE->PDE->PTE)
should point to scratch page table/scratch page to avoid page walk error
due to the page prefetching.
When removing an entry in shadow PPGTT, it need map to scratch page
also, the older implementation use single scratch page to assign to all
level entries, it doesn't align the page walk behavior when removed
entry is in PML, PDP, PD. To avoid potential page walk error this patch
implement a scratch page tree to replace the single scratch page.
v2: more details in commit message address Kevin's comments.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When SW wishes to reset the render engine, it will program
engine's reset control register and wait response from HW.
We need emulate the behavior of this register so guest i915
driver could walk through the engine reset flow. The registers
are not emulated in gvt yet, this patch add the emulation
logic.
v2: add more desc info in commit message.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
From commit e95433c73a, workload status setting
was changed to only capture on error path, but we need to set it properly in
normal path too, otherwise we'll fail to complete workload which could lead
guest VM vGPU reset.
v2: uses braces and add Fixes tag.
Fixes: e95433c73a ("drm/i915: Rearrange i915_wait_request() accounting with callers")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Misc ctl related registers are for WA purpose, should detect the
stepping info first before updating HW value.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Need a explicit write_vreg in TLB MMIO write handler, beside that
TLB vreg should update correspondingly following HW status to do
correct emulation.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Missing write_vreg in DMA_CTRL write handler would make obsolete
value return when read vreg.
v2: get data from vreg after updating it.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Remove the variable 'execlist' as it's unused in function
vgpu_has_pending_workload.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is to fix smatch warning on
drivers/gpu/drm/i915/gvt/cmd_parser.c:1421 cmd_handler_mi_op_2f()
warn: shift has higher precedence than mask
We need bits 20-19 mask for data size.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Now that we don't run the connector reprobing from i915_drm_resume(), we
need to make it so we don't have to wait for reprobing to finish so that
we actually speed things up. In order to do this, we need to make sure
that i915_drm_resume() doesn't get blocked by i915_hpd_poll_init_work()
while trying to acquire the mode_config lock that
drm_kms_helper_poll_enable() needs to acquire.
The easiest way to do this is to just enable polling before hpd. This
shouldn't break anything since at that point we have everything else we
need for polling enabled.
As well, this should result in a rather significant improvement in how
quickly we can resume the system.
Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
Weine's investigation on benchmarking the suspend/resume process pointed
out a lot of the time in suspend/resume is being spent reprobing. While
the reprobing process is a lengthy one for good reason, we don't need to
hold up the entire suspend/resume process while we wait for it to
finish. Luckily as it turns out, we already trigger a full connector
reprobe in i915_hpd_poll_init_work(), so we can just ditch reprobing in
i915_drm_resume() entirely.
This won't lead to less time spent resuming just yet since now the
bottleneck will be waiting for the mode_config lock in
drm_kms_helper_poll_enable(), since that will be held as long as
i915_hpd_poll_init_work() is reprobing all of the connectors. But we'll
address that in the next patch.
Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.
v2: Move drm_device to drm_i915_private conversion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: stable@vger.kernel.org
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."
Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.
v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
Retain the set cdclk across modesets (Ville)
Cc: stable@vger.kernel.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com
commit bc0629a767 ("drm/i915: Track pages pinned due to swizzling
quirk") fixed one problem, but revealed a whole lot more. The root cause
of the pin count mismatch for the swizzle quirk (for L-shaped memory on
gen3/4) was that we were incrementing the pages_pin_count upon getting
the backing pages but then overwriting the pages_pin_count to set it to
1 afterwards. With a little bit of adjustment to satisfy the GEM_BUG_ON
sanitychecks, the fix is to replace the explicit atomic_set with an
atomic_inc.
v2: Consistently use atomics (not mix atomics and helpers) within the
lowlevel get_pages routines. This makes the atomic operations much
clearer.
Fixes: 1233e2db19 ("drm/i915: Move object backing storage manipulation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161104103001.27643-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When supplying a view to vma_compare() it is required that the supplied
i915_address_space is the global GTT. I tested the VMA instead (which is
the current position in the rbtree and maybe from any address space).
Reported-by: Matthew Auld <matthew.auld@intel.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98579
Fixes: db6c2b4151 ("drm/i915: Store the vma in an rbtree...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161103200852.23431-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Move has_64bit_reloc into dev_priv->info. This will make it visible
in the feature listing debug output.
v2:
- Keep the struct member to keep GCC fragile but happy (Chris)
v3:
- More detailed commit message (Chris)
- Include forgotten CHV and BXT (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478162386-5018-1-git-send-email-joonas.lahtinen@linux.intel.com
Mike Krinkin reported hangs in the DRM code and bisected it to:
3ab7c086d5 ("locking/drm: Kill mutex trickery")
Hugh Dickins observed:
"i915_gem_shrinker_lock() is broken: but copy the pattern from
msm_gem_shrinker_lock() and it's okay - patch below."
Pick up the fix in isolation to make sure the bug is fixed, cleanup
patch will follow up.
Originally-From: Hugh Dickins <hughd@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: chris@chris-wilson.co.uk
Cc: jason.low2@hpe.com
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1610301645180.28429@eggly.anvils
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Create new file for hangcheck specific code, intel_hangcheck.c,
and move all related code in it.
v2: s/intel_engine_hangcheck/intel_engine (Chris)
No functional changes.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478018583-5816-1-git-send-email-mika.kuoppala@intel.com
Comparing pte index to a number of entries is wrong
when clearing a range of pte entries. Use end marker
of 'one past' to correctly point adequate number of
ptes to the scratch page.
v2: assert early instead of warning late (Chris)
v3: removed consts (Joonas)
Fixes: d209b9c3cd ("drm/i915/gtt: Split gen8_ppgtt_clear_pte_range")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98282
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Commit 1bec9b0bda ("drm/i915/shrinker: Only shmemfs objects
are backed by swap") stopped considering the userptr objects
in shrinker callbacks.
Restore that so idle userptr objects can be discarded in order
to free up memory.
One change further to what was introduced in 1bec9b0bda is
to start considering userptr objects in oom but that should
also be a correct thing to do.
v2: Introduce I915_GEM_OBJECT_IS_SHRINKABLE. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1bec9b0bda ("drm/i915/shrinker: Only shmemfs objects are backed by swap")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478011450-6634-1-git-send-email-tvrtko.ursulin@linux.intel.com
Replace the open coded dev_priv->pipe_to_crtc_mapping[] usage with
intel_get_crtc_for_pipe().
Mostly done with coccinelle, with a few manual tweaks
@@
expression E1, E2;
@@
(
- E1->pipe_to_crtc_mapping[E2]
+ intel_get_crtc_for_pipe(E1, E2)
|
- E1->plane_to_crtc_mapping[E2]
+ intel_get_crtc_for_plane(E1, E2)
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-12-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
For legacy contexts we employ an optimisation to only flush the context
when binding into the global GTT. This avoids stalling on the GPU when
reloading an active context. Wrap this detail up into a helper and
export it for a potential third user. (Longer term, context pinning
needs to be reworked as the current handling of switch context pins too
late and so risks eviction and corrupting the request. Plans, plans,
plans.)
v2: Expand the comment explaining the optimisation for avoiding the
stall on active contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161030132820.32163-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
There's no need to keep a duplicate skl_pipe_wm around any more,
everything can be discovered from crtc_state, which we pass around
correctly now even in case of plane disable.
The copy in intel_crtc->wm.skl.active is equal to
crtc_state->wm.skl.optimal after the atomic commit completes.
It's useful for two-step watermark programming, but not required for
gen9+ which does it in a single step. We can pull the old allocation
from old_crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-9-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Move calculating minimum allocations to a helper, which cleans up the
code some more. The cursor is still allocated in advance because it
doesn't count towards data rate and should always be reserved.
changes since v1:
- Change comment to have a extra opening line. (Matt)
- Rebase to remove unused plane->pipe == pipe, handled by the iterator
now. (Paulo)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-7-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
It's only used in one function, and can be calculated without caching it
in the global struct by using drm_atomic_crtc_state_for_each_plane_state.
There are loops over all planes, including planes that don't exist.
This is harmless, because data_rate will always be 0 for them and we
never program them when updating watermarks.
Changes since v1:
- Rename rate back to data_rate, and change array name to
plane_data_rate. (Matt)
- Remove whitespace. (Paulo)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-5-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Using for_each_intel_plane_on_crtc will allow us to find all allocations
that may have changed, not just the one added by the atomic state.
This will print changes to plane allocations for crtc's when some
planes are not added to the atomic state.
Changes since v1:
- Rephrase commit message. (Ville)
- Use plane->base.id and plane->name to kill off cursor special
case. (Ville)
- Add intel_crtc to prevent a line wrap. (Paulo)
- Line wrap debug messages.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/c9f7dc1a-d23a-7c16-b2b7-1c23dd07ed35@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
I'm planning on getting rid of all obj->state dereferences,
and replace thhem with accessor functions.
Remove this one early, they're equivalent because removed
planes are already part of the state, else they could not
have been removed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Caching is not required, drm_atomic_crtc_state_for_each_plane_state can
be used to inspect the states of all planes assigned to the CRTC even
if they are not part of _state, so we can just recalculate every time.
Changes since v1:
- Remove plane->pipe checks, they're implied by the macros.
- Split unrelated changes to a separate commit.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
The shrinker may appear to recurse into obj->mm.lock as the shrinker may
be called from a direct reclaim path whilst handling get_pages. We
filter out recursing on the same obj->mm.lock by inspecting
obj->mm.pages, but we do want to take the lock on a second object in
order to reap their pages. lockdep spots the recursion on the same
lockclass and needs annotation to avoid a false positive. To keep the
two paths distinct, create an enum to indicate which subclass of
obj->mm.lock we are using. This removes the false positive and avoids
masking real bugs.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101121134.27504-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
With full-ppgtt one of the main bottlenecks is the lookup of the VMA
underneath the object. For execbuf there is merit in having a very fast
direct lookup of ctx:handle to the vma using a hashtree, but that still
leaves a large number of other lookups. One way to speed up the lookup
would be to use a rhashtable, but that requires extra allocations and
may exhibit poor worse case behaviour. An alternative is to use an
embedded rbtree, i.e. no extra allocations and deterministic behaviour,
but at the slight cost of O(lgN) lookups (instead of O(1) for
rhashtable). The major of such tree will be very shallow and so not much
slower, and still scales much, much better than the current unsorted
list.
v2: Bump vma_compare() to return a long, as we return the result of
comparing two pointers.
References: https://bugs.freedesktop.org/show_bug.cgi?id=87726
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101115400.15647-1-chris@chris-wilson.co.uk
If we have a tiled object and an unknown CPU swizzle pattern, we pin the
pages to prevent the object from being swapped out (and us corrupting
the contents as we do not know the access pattern and so cannot convert
it to linear and back to tiled on reuse). This requires us to remember
to drop the extra pinning when freeing the object, or else we trigger
warnings about the pin leak. In commit fbbd37b36f ("drm/i915: Move
object release to a freelist + worker"), the object free path was
deferred to a worker, but the unpinning of the quirk, along with marking
the object as reclaimable, was left on the immediate path (so that if
required we could reclaim the pages under memory pressure as early as
possible). However, this split introduced a bug where the pages were no
longer being unpinned if they were marked as unneeded.
[ 231.800401] WARNING: CPU: 1 PID: 90 at drivers/gpu/drm/i915/i915_gem.c:4275 __i915_gem_free_objects+0x326/0x3c0 [i915]
[ 231.800403] WARN_ON(i915_gem_object_has_pinned_pages(obj))
[ 231.800405] Modules linked in:
[ 231.800406] snd_hda_intel i915 snd_hda_codec_generic mei_me snd_hda_codec coretemp snd_hwdep mei lpc_ich snd_hda_core snd_pcm e1000e ptp pps_core [last unloaded: i915]
[ 231.800426] CPU: 1 PID: 90 Comm: kworker/1:4 Tainted: G U 4.9.0-rc2-CI-CI_DRM_1780+ #1
[ 231.800428] Hardware name: LENOVO 7465CTO/7465CTO, BIOS 6DET44WW (2.08 ) 04/22/2009
[ 231.800456] Workqueue: events __i915_gem_free_work [i915]
[ 231.800459] ffffc9000034fc80 ffffffff8142dd65 ffffc9000034fcd0 0000000000000000
[ 231.800465] ffffc9000034fcc0 ffffffff8107e4e6 000010b300000001 0000000000001000
[ 231.800469] ffff88011d3db740 ffff880130ef0000 0000000000000000 ffff880130ef5ea0
[ 231.800474] Call Trace:
[ 231.800479] [<ffffffff8142dd65>] dump_stack+0x67/0x92
[ 231.800484] [<ffffffff8107e4e6>] __warn+0xc6/0xe0
[ 231.800487] [<ffffffff8107e54a>] warn_slowpath_fmt+0x4a/0x50
[ 231.800491] [<ffffffff811d12ac>] ? kmem_cache_free+0x2dc/0x340
[ 231.800520] [<ffffffffa009ef36>] __i915_gem_free_objects+0x326/0x3c0 [i915]
[ 231.800548] [<ffffffffa009effe>] __i915_gem_free_work+0x2e/0x50 [i915]
[ 231.800552] [<ffffffff8109c27c>] process_one_work+0x1ec/0x6b0
[ 231.800555] [<ffffffff8109c1f6>] ? process_one_work+0x166/0x6b0
[ 231.800558] [<ffffffff8109c789>] worker_thread+0x49/0x490
[ 231.800561] [<ffffffff8109c740>] ? process_one_work+0x6b0/0x6b0
[ 231.800563] [<ffffffff8109c740>] ? process_one_work+0x6b0/0x6b0
[ 231.800566] [<ffffffff810a2aab>] kthread+0xeb/0x110
[ 231.800569] [<ffffffff810a29c0>] ? kthread_park+0x60/0x60
[ 231.800573] [<ffffffff818164a7>] ret_from_fork+0x27/0x40
Moving to a separate flag for tracking the quirked pin is overkill for
the bug (since we only have to interchange the two tests in
i915_gem_free_object) but it does reduce a complicated test on all
objects and provide a sanitycheck for uncommon code paths.
Fixes: fbbd37b36f ("drm/i915: Move object release to a freelist + worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101100317.11129-2-chris@chris-wilson.co.uk
During shrinking, we walk over the list of objects searching for
victims. Any that are not removed are put back into the global list.
Currently, they are put back in order (at the front) which means they
will be first to be scanned again. If we instead move them to the rear
of the list, we will scan new potential victims on the next pass and
waste less time rescanning unshrinkable objects. Normally the lists are
kept in rough order to shrinking (with object least frequently used at
the start), by moving just scanned objects to the rear we are
acknowledging that they are still in use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-3-chris@chris-wilson.co.uk
Due to the plane->index not getting readjusted in drm_plane_cleanup(),
we can't continue initialization of some plane/crtc init fails.
Well, we sort of could I suppose if we left all initialized planes on
the list, but that would expose those planes to userspace as well.
But for crtcs the situation is even worse since we assume that
pipe==crtc index occasionally, so we can't really deal with a partially
initialize set of crtcs.
So seems safest to just abort the entire thing if anything goes wrong.
All the failure paths here are kmalloc()s anyway, so it seems unlikely
we'd get very far if these start failing.
v2: Add (enum plane) case to silence gcc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
One of the CI machines began to run into issues with the hpd poller
suddenly waking up in the midst of the late suspend phase. It looks like
this is getting caused by the fact we now deinitialize power wells in
late suspend, which means that intel_hpd_poll_init() gets called in late
suspend causing polling to get re-enabled. So, when deinitializing power
wells on valleyview we now refrain from enabling polling in the midst of
suspend.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040
Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Petry Latvala <petri.latvala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com
With the infrastructure converted over to tracking multiple timelines in
the GEM API whilst preserving the efficiency of using a single execution
timeline internally, we can now assign a separate timeline to every
context with full-ppgtt.
v2: Add a comment to indicate the xfer between timelines upon submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-35-chris@chris-wilson.co.uk
Defer the assignment of the global seqno on a request to its submission.
In the next patch, we will only allocate the global seqno at that time,
here we are just enabling the wait-for-submission before wait-for-seqno
paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-34-chris@chris-wilson.co.uk
A restriction on our global seqno is that they cannot wrap, and that we
cannot use the value 0. This allows us to detect when a request has not
yet been submitted, its global seqno is still 0, and ensures that
hardware semaphores are monotonic as required by older hardware. To
meet these restrictions when we defer the assignment of the global
seqno, we must check that we have an available slot in the global seqno
space during request construction. If that test fails, we wait for all
requests to be completed and reset the hardware back to 0.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-33-chris@chris-wilson.co.uk
This will be used for communicating issues with this context to
userspace, so we want to identify the parent process and the individual
context. Note that the name isn't quite unique, it makes the presumption
of there only being a single device fd per process.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-31-chris@chris-wilson.co.uk
Currently we try to reduce the number of synchronisations (now the
number of requests we need to wait upon) by noting that if we have
earlier waited upon a request, all subsequent requests in the timeline
will be after the wait. This only applies to requests in this timeline,
as other timelines will not be ordered by that waiter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-30-chris@chris-wilson.co.uk
Move the actual emission of the breadcrumb for closing the request from
i915_add_request() to the submit callback. (It can be moved later when
required.) This allows us to defer the allocation of the global_seqno
from request construction to actual submission, allowing us to emit the
requests out of order (wrt to the order of their construction, they
still will only be executed one all of their dependencies are resolved
including that all earlier requests on their timeline have been
submitted.) We have to specialise how we then emit the request in order
to write into the preallocated space, rather than at the tail of the
ringbuffer (which will have been advanced by the addition of new
requests).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-29-chris@chris-wilson.co.uk
In the next patch, we will use deferred breadcrumb emission. That requires
reserving sufficient space in the ringbuffer to emit the breadcrumb, which
first requires us to know how large the breadcrumb is.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-28-chris@chris-wilson.co.uk
Now that the emission of the request tail and its submission to hardware
are two separate steps, engine->emit_request() is confusing.
engine->emit_request() is called to emit the breadcrumb commands for the
request into the ring, name it such (engine->emit_breadcrumb).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-27-chris@chris-wilson.co.uk
Though we will have multiple timelines, we still have a single timeline
of execution. This we can use to provide an execution and retirement order
of requests. This keeps tracking execution of requests simple, and vital
for preserving a single waiter (i.e. so that we can order the waiters so
that only the earliest to wakeup need be woken). To accomplish this we
distinguish the seqno used to order requests per-context (external) and
that used internally for execution.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-26-chris@chris-wilson.co.uk
In future patches, we will no longer be able to wait on a static global
seqno and instead have to break our wait up into phases. First we wait
for the global seqno assignment (upon submission to hardware), and once
submitted we wait for the hardware to complete.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-25-chris@chris-wilson.co.uk
Before suspend, we wait for the switch to the kernel context. In order
for all the other context images to be complete upon suspend, that
switch must be the last operation by the GPU (i.e. this idling request
must not overtake any pending requests). To make this request execute last,
we make it depend on every other inflight request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-24-chris@chris-wilson.co.uk
Our timelines are more than just a seqno. They also provide an ordered
list of requests to be executed. Due to the restriction of handling
individual address spaces, we are limited to a timeline per address
space but we use a fence context per engine within.
Our first step to introducing independent timelines per context (i.e. to
allow each context to have a queue of requests to execute that have a
defined set of dependencies on other requests) is to provide a timeline
abstraction for the global execution queue.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-23-chris@chris-wilson.co.uk
After combining the dma-buf reservation object and the GEM reservation
object, we lost the ability to do a nonblocking wait on the i915 request
(as we blocked upon the reservation object during prepare_fb). We can
instead convert the reservation object into a fence upon which we can
asynchronously wait (including a forced timeout in case the DMA fence is
never signaled).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-22-chris@chris-wilson.co.uk
In preparation to support many distinct timelines, we need to expand the
activity tracking on the GEM object to handle more than just a request
per engine. We already use the struct reservation_object on the dma-buf
to handle many fence contexts, so integrating that into the GEM object
itself is the preferred solution. (For example, we can now share the same
reservation_object between every consumer/producer using this buffer and
skip the manual import/export via dma-buf.)
v2: Reimplement busy-ioctl (by walking the reservation object), postpone
the ABI change for another day. Similarly use the reservation object to
find the last_write request (if active and from i915) for choosing
display CS flips.
Caveats:
* busy-ioctl: busy-ioctl only reports on the native fences, it will not
warn of stalls (in set-domain-ioctl, pread/pwrite etc) if the object is
being rendered to by external fences. It also will not report the same
busy state as wait-ioctl (or polling on the dma-buf) in the same
circumstances. On the plus side, it does retain reporting of which
*i915* engines are engaged with this object.
* non-blocking atomic modesets take a step backwards as the wait for
render completion blocks the ioctl. This is fixed in a subsequent
patch to use a fence instead for awaiting on the rendering, see
"drm/i915: Restore nonblocking awaits for modesetting"
* dynamic array manipulation for shared-fences in reservation is slower
than the previous lockless static assignment (e.g. gem_exec_lut_handle
runtime on ivb goes from 42s to 66s), mainly due to atomic operations
(maintaining the fence refcounts).
* loss of object-level retirement callbacks, emulated by VMA retirement
tracking.
* minor loss of object-level last activity information from debugfs,
could be replaced with per-vma information if desired
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-21-chris@chris-wilson.co.uk
Having moved the locked phase of freeing an object to a separate worker,
we can now declare to the core that we only need the unlocked variant of
driver->gem_free_object, and can use the simple unreference internally.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-20-chris@chris-wilson.co.uk
We want to hide the latency of releasing objects and their backing
storage from the submission, so we move the actual free to a worker.
This allows us to switch to struct_mutex freeing of the object in the
next patch.
Furthermore, if we know that the object we are dereferencing remains valid
for the duration of our access, we can forgo the usual synchronisation
barriers and atomic reference counting. To ensure this we defer freeing
an object til after an RCU grace period, such that any lookup of the
object within an RCU read critical section will remain valid until
after we exit that critical section. We also employ this delay for
rate-limiting the serialisation on reallocation - we have to slow down
object creation in order to prevent resource starvation (in particular,
files).
v2: Return early in i915_gem_tiling() ioctl to skip over superfluous
work on error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-19-chris@chris-wilson.co.uk
We only need struct_mutex within pwrite for a brief window where we need
to serialise with rendering and control our cache domains. Elsewhere we
can rely on the backing storage being pinned, and forgive userspace any
races against us.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-17-chris@chris-wilson.co.uk
We only need struct_mutex within pread for a brief window where we need
to serialise with rendering and control our cache domains. Elsewhere we
can rely on the backing storage being pinned, and forgive userspace any
races against us.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-16-chris@chris-wilson.co.uk
Break the allocation of the backing storage away from struct_mutex into
a per-object lock. This allows parallel page allocation, provided we can
do so outside of struct_mutex (i.e. set-domain-ioctl, pwrite, GTT
fault), i.e. before execbuf! The increased cost of the atomic counters
are hidden behind i915_vma_pin() for the typical case of execbuf, i.e.
as the object is typically bound between execbufs, the page_pin_count is
static. The cost will be felt around set-domain and pwrite, but offset
by the improvement from reduced struct_mutex contention.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-14-chris@chris-wilson.co.uk
The plan is to move obj->pages out from under the struct_mutex into its
own per-object lock. We need to prune any assumption of the struct_mutex
from the get_pages/put_pages backends, and to make it easier we pass
around the sg_table to operate on rather than indirectly via the obj.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-13-chris@chris-wilson.co.uk
The plan is to make obtaining the backing storage for the object avoid
struct_mutex (i.e. use its own locking). The first step is to update the
API so that normal users only call pin/unpin whilst working on the
backing storage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-12-chris@chris-wilson.co.uk
A while ago we switched from a contiguous array of pages into an sglist,
for that was both more convenient for mapping to hardware and avoided
the requirement for a vmalloc array of pages on every object. However,
certain GEM API calls (like pwrite, pread as well as performing
relocations) do desire access to individual struct pages. A quick hack
was to introduce a cache of the last access such that finding the
following page was quick - this works so long as the caller desired
sequential access. Walking backwards, or multiple callers, still hits a
slow linear search for each page. One solution is to store each
successful lookup in a radix tree.
v2: Rewrite building the radixtree for clarity, hopefully.
v3: Rearrange execbuf to avoid calling i915_gem_object_get_sg() from
within an atomic section and so relax the allocation context to a simple
GFP_KERNEL and mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-10-chris@chris-wilson.co.uk
The golden render state is constant, but we recreate the batch setting
it up for every new context. If we keep that batch in a volatile cache
we can safely reuse it whenever we need to initialise a new context. We
mark the pages as purgeable and use the shrinker to recover pages from
the batch whenever we face memory pressues, recreating that batch afresh
on the next new context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtien@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-8-chris@chris-wilson.co.uk
Quite a few of our objects used for internal hardware programming do not
benefit from being swappable or from being zero initialised. As such
they do not benefit from using a shmemfs backing storage and since they
are internal and never directly exposed to the user, we do not need to
worry about providing a filp. For these we can use an
drm_i915_gem_object wrapper around a sg_table of plain struct page. They
are not swap backed and not automatically pinned. If they are reaped
by the shrinker, the pages are released and the contents discarded. For
the internal use case, this is fine as for example, ringbuffers are
pinned from being written by a request to be read by the hardware. Once
they are idle, they can be discarded entirely. As such they are a good
match for execlist ringbuffers and a small variety of other internal
objects.
In the first iteration, this is limited to the scratch batch buffers we
use (for command parsing and state initialisation).
v2: Allocate physically contiguous pages, where possible.
v3: Reduce maximum order on subsequent requests following an allocation
failure.
v4: Fix up mismatch between swiotlb segment size and page count (it
counts in 2k units, not 4k pages)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
Our low-level wait routine has evolved from our generic wait interface
that handled unlocked, RPS boosting, waits with time tracking. If we
push our GEM fence tracking to use reservation_objects (required for
handling multiple timelines), we lose the ability to pass the required
information down to i915_wait_request(). However, if we push the extra
functionality from i915_wait_request() to the individual callsites
(i915_gem_object_wait_rendering and i915_gem_wait_ioctl) that make use
of those extras, we can both simplify our low level wait and prepare for
extending the GEM interface for use of reservation_objects.
v2: Rewrite i915_wait_request() kerneldocs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-4-chris@chris-wilson.co.uk
We only need the active reference to keep the object alive after the
handle has been deleted (so as to prevent a synchronous gem_close). Why
then pay the price of a kref on every execbuf when we can insert that
final active ref just in time for the handle deletion?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-6-chris@chris-wilson.co.uk
Since we only use the more generic unlocked variant, just rename it as
the normal i915_gem_active_wait(). The temporary cost is that we need to
always acquire the reference in a RCU safe manner, but the benefit is
that we will combine the common paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-5-chris@chris-wilson.co.uk
The throttle-ioctl never touches the struct_mutex. It does, however, as
part of its ABI report whether the hardware is terminally wedged. For
that purposes, it only has to report the current state and not incur the
cost of checking/waiting every invocation, as we do not have to wait for
a reset before waiting on a request to ensure completion (that is baked
into the wait request implementation).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-3-chris@chris-wilson.co.uk
In forthcoming patches, we want to be able to dynamically allocate the
wait_queue_t used whilst awaiting. This is more convenient if we extend
the i915_sw_fence_await_sw_fence() to perform the allocation for us if
we pass in a gfp mask as an alternative than a preallocated struct.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-2-chris@chris-wilson.co.uk
We will need to wait on DMA completion (as signaled via struct fence)
before executing our i915_gem_request. Therefore we want to expose a
method for adding the await on the fence itself to the request.
v2: Add a comment detailing a failure to handle a signal-on-any
fence-array.
v3: Pretend that magic numbers don't exist.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-1-chris@chris-wilson.co.uk
We are not allowed to touch the GTT entries underneath an atomic section,
as they take a rpm wakelock (which is illegal from atomic context) and
in the near future acquiring the DMA address for a page within an object
may sleep for an allocation. This makes the current shortcircuit in
relocation_iomap() for performing a second relocation on an adjacent page
illegal, and we need to release the atomic iomapping, lookup the DMA,
insert it into the GTT before reentering the atomic iomap section.
As it happens, this is precisely what we do on if we are using an
iomapping over the full object and not just a single page and by
removing the shortcut, we do the right thing.
Fixes: 9c870d0367 ("drm/i915: Use RPM as the barrier for controlling...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028142756.3850-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
This macro's name is a bit misleading; it doesn't actually iterate over
all planes since it omits the cursor plane. Its only uses are in gen9
code which is using it to iterate over the universal planes (which we
treat as primary+sprites); in these cases the legacy cursor registers
are programmed independently if necessary. The macro's iterator value
(0 for primary plane, spritenum+1 for each secondary plane) also isn't
meaningful outside the gen9 context where the hardware considers them to
all be "universal" planes that follow this numbering.
This is just a renaming/clarification patch with no functional change.
However it will make the subsequent patches more clear.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477522291-10874-2-git-send-email-matthew.d.roper@intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Pass the framebuffer size in .16 fixed point coordinates to
drm_rect_rotate() since that's what the source coordinates are as well
at this stage. We used to do this part of the computation in integer
coordinates, but that got changed when moving the computation to
happen in the check phase of the operation. Unfortunately I forgot
to shift up the fb width and height appropriately.
With the bogus size we ended up with some negative fb offset, which when
added to the vma offset caused out scanout to start at an offset earlier
than we inteded. Eg. when testing on my SKL I saw a row of incorrect
tiles at the top of my screen.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: b63a16f6cd ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit da064b47c0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Objects can have multiple VMAs used for display in which
case assertion that objects must not be pinned for display
more times than the current VMA is incorrect.
v2: Commit message update. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 058d88c433 ("drm/i915: Track pinned VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 3299e7e434)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We do not need to set up a fence for the rotated view.
Display does not need it and no one can access it.
v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 05a20d098d ("drm/i915: Move map-and-fenceable tracking to the VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 07ee2bce6a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Broadwell and newer actually compress up to 2560 lines instead of 2048
(as documented in the FBC_CTL page). If we don't take this into
consideration we end up reserving too little stolen memory for the
CFB, so we may allocate something else (such as a ring) right after
what we reserved, and the hardware will overwrite it with the contents
of the CFB when FBC is active, causing GPU hangs. Another possibility
is that the CFB may be allocated at the very end of the available
space, so the CFB will overlap the reserved stolen area, leading to
FIFO underruns.
This bug has always been a problem on BDW (the only affected platform
where FBC is enabled by default), but it's much easier to reproduce
since the following commit:
commit c58b735fc7
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Aug 18 17:16:57 2016 +0100
drm/i915: Allocate rings from stolen
Of course, you can only reproduce the bug if your screen is taller
than 2048 lines.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213
Fixes: a98ee79317 ("drm/i915/fbc: enable FBC by default on HSW and BDW")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 79f2624b1b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The previous code would wait for fences on the framebuffer from the old
plane state to complete, rather than the new, so you would see tearing
everywhere. Fix this to wait on the new state before we make it active.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 94f050246b ("drm/i915: nonblocking commit")
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com
(cherry picked from commit 2d2c5ad83f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that we use the AUX and GMBUS assignment from VBT for all ports,
let's clean up the sanitization of the port information a bit.
Previosuly we only did this for port E, and only complained about a
non-standard assignment for the other ports. But as we know that
non-standard assignments are a fact of life, let's expand the
sanitization to all the ports.
v2: Include a commit message, fix up the comments a bit
v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (v2)
(cherry picked from commit 9454fa871e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The VBT provides the platform a way to mix and match the DDI ports vs.
AUX channels. Currently we only trust the VBT for DDI E, which has no
corresponding AUX channel of its own. However it is possible that some
board might use some non-standard DDI vs. AUX port routing even for
the other ports. Perhaps for signal routing reasons or something,
So let's generalize this and trust the VBT for all ports.
For now we'll limit this to DDI platforms, as we trust the VBT a bit
more there anyway when it comes to the DDI ports. I've structured
the code in a way that would allow us to easily expand this to
other platforms as well, by simply filling in the ddi_port_info.
v2: Drop whitespace changes, keep MISSING_CASE() for unknown
aux ch assignment, include a commit message, include debug
message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
(cherry picked from commit 8f7ce038f1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Luckily, the necessary adjustments for when we're using the scaler are
exactly the same as the ones needed on ILK+, so just reuse the
function we already have.
v2: Invert the patch order so stable backports get easier.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit cfd7e3a202)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently the display INIT power domain disabling/enabling happens in a
mismatched way in the suspend/resume_early hooks respectively. This can
leave display power wells incorrectly disabled in the resume hook if the
suspend sequence is aborted for some reason resulting in the
suspend/resume hooks getting called but the suspend_late/resume_early
hooks being skipped. In particular this change fixes "Unclaimed read
from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()->
intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set
to devices.
Fixes: 85e9067933 ("drm/i915: disable power wells on suspend")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 4c494a5769)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We want to read 3 bytes here, but because the parenthesis are in the
wrong place we instead read:
sizeof(intel_dp->edp_dpcd) == sizeof(intel_dp->edp_dpcd)
which is one byte.
Fixes: fe5a66f91c ("drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161013085508.GJ16198@mwanda
(cherry picked from commit f7170e2eb8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix sparse warning:
drivers/gpu/drm/i915/intel_device_info.c:195:31: warning: Variable
length array is used.
In truth the array does have constant length, but sparse is too dumb to
realize. This is a bit ugly, but silence the warning no matter what.
Fixes: 91bedd34ab ("drm/i915/bdw: Check for slice, subslice and EU count for BDW")
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit ff64aa1e63)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix sparse warnings:
drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol
'i915_driver_load' was not declared. Should it be static?
drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol
'i915_driver_unload' was not declared. Should it be static?
drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops'
was not declared. Should it be static?
Fixes: 42f5551d27 ("drm/i915: Split out the PCI driver interface to i915_pci.c")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com
(cherry picked from commit efab0698f9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
These static helper functions are required to be used during
fallback link rate implemnetation so they need to be placed at the top
of the file.
v3:
* Add cleanup to other patch (Mika Kahola)
v2:
* Dont move around functions declared in intel_drv.h (Rodrigo Vivi)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477524358-16563-4-git-send-email-manasi.d.navare@intel.com
The port registers related to the phys in broxton map to different
channels and specific phys. Make that mapping explicit.
v2: Pass enum dpio_phy to macros instead of mmio base. (Imre)
v3: Fix typo in macros. (Imre)
v4: Also change variables from u32 to enum dpio_phy. (Imre)
Remove leftovers from previous version. (Imre)
v5: Actually git add the changes.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476863940-6019-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Use struct bxt_ddi_phy_info to hold information of where the Rcomp
resistor is located, instead of hard coding it in the init sequence.
Note that this moves the enabling of the phy with the Rcomp resistor out
of the power well enable code. That should be safe since
bxt_ddi_phy_init() is called while the power domains lock is held, and
that is the only way that function gets called, so there is no
possibility of a concurrent phy enable caused by a power domain get
call.
v2: Replace comment about lock with lockdep_assert_held() (Imre)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/62d209950ad48484564f3e793cf247cf62572a39.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
Backmerge latest drm-next to pull in the s/fence/dma_fence/ rework,
needed before we merge more i915 fencing patches.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
gvt-next-2016-10-27
- Resolve current left build issue with ACPI=n and 32bit kernel
- TLB workaround from Arkadiusz
- vGPU reset fix from Ping
- workload scheduler nesting sleep fix from Changbin
- more misc fixes for sparse warnings and cleanups
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We cannot use blocking method mutex_lock inside a wait loop.
Here we invoke pick_next_workload() which needs acquire a
mutex in our "condition" experssion. Then we go into a another
of the going-to-sleep sequence and changing the task state.
This is a dangerous. Let's rewrite the wait sequence to avoid
nested sleeping.
v2: fix do...while loop exit condition (zhenyu)
v3: rebase to gvt-staging branch
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
throw error message in elsp emulation handler basing on execlist
submit result. guest will trigger tdr process for recovering, gvt
just follow guest's desire.
v2: populate error to top of mmio emulation logic, comments from
zhenyu
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Full vGPU reset need to release all the shadow PPGGT pages to avoid
unnecessary write-protect and also should re-initialize pvinfo after
resetting vregs to keep pvinfo correct.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Currently, for display there is only one DMC image for KBL.
Remove the stepping_info table for KBL and use the no_stepping_info
array for loading the firmware.
v2: Removed the block of code as pointed out by Rodrigo to make the
loads as generic as possible.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477355301-7035-1-git-send-email-anusha.srivatsa@intel.com
Pass the framebuffer size in .16 fixed point coordinates to
drm_rect_rotate() since that's what the source coordinates are as well
at this stage. We used to do this part of the computation in integer
coordinates, but that got changed when moving the computation to
happen in the check phase of the operation. Unfortunately I forgot
to shift up the fb width and height appropriately.
With the bogus size we ended up with some negative fb offset, which when
added to the vma offset caused out scanout to start at an offset earlier
than we inteded. Eg. when testing on my SKL I saw a row of incorrect
tiles at the top of my screen.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: b63a16f6cd ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Comment mentioned use of intel_uncore_forcewake_irq{unlock, lock}
functions which are nonexistent (and never were).
The description was also incomplete and could cause confusion. Updated
comment is more elaborate on usage and caveats.
v2: mention __locked variant of intel_uncore_forcewake_{get,put} instead
of plain ones
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilsono.c.uk>
[Mika: removed two superfluous lines on comment noted by Chris]
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477399682-3133-1-git-send-email-arkadiusz.hiler@intel.com
On my APL the LSPCON firmware resumes in PCON mode as opposed to the
expected LS mode. It also appears to be in a state where AUX DPCD reads
will succeed but return garbage recovering only after a few hundreds of
milliseconds. After the recovery time DPCD reads will result in the
correct values and things will continue to work. If I2C over AUX is
attempted during this recovery time (implying an AUX write transaction)
the firmware won't recover and will stay in this broken state.
As a workaround check if the firmware is in PCON state after resume and
if so wait until the correct DPCD values are returned. For this we
compare the branch descriptor with the one we cached during init time.
If the firmware was in the LS state, we skip the w/a and continue as
before.
v2:
- Use the DP descriptor value cached in intel_dp. (Jani)
- Get to intel_dp using container_of(), instead of a cached ptr.
(Shashank)
- Use usleep_range() instead of msleep().
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98353
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-9-git-send-email-imre.deak@intel.com
We can use the container_of() magic to get to the DDC adapter, so no
need for caching a pointer to it. We'll also need to get at the intel_dp
ptr in the following patch, so add a helper that can be used for both
purposes.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-8-git-send-email-imre.deak@intel.com
As for external DP sink and branch devices read and print the DP
descriptor for eDP and LSPCON devices as well to aid debugging.
v2:
- Split out this change to a separate patch. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-7-git-send-email-imre.deak@intel.com
All types of DP devices (eDP, DP sink, DP branch) will fail their probe
if the start of DPCD can't be read. The LSPCON PCON functionality also
depends on accessing this area, so fail the probe if the read fails.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-6-git-send-email-imre.deak@intel.com
Extend the branch/sink descriptor info with the missing device ID
field. While at it also read out all the descriptor registers in one
transfer and make the debug print more compact.
v2: (Jani)
- Cache the descriptor in intel_dp.
- Split out this change into a separate patch.
v3: (Jani)
- Fix return value check of __intel_dp_read_desc().
- Use %pE instead of %s to print the device ID.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477401159-15098-1-git-send-email-imre.deak@intel.com
There are two separate sets of DPCD registers for the DP OUI - as well as
for the device ID and HW/SW revision - based on whether the given DP
device is a branch or a sink. Currently we print both branch and sink
OUIs, for consistency print only the one that corresponds to the
probed device.
v2:
- Split out this change into a separate patch. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-4-git-send-email-imre.deak@intel.com
Performing DPCD AUX reads based on debug settings may introduce obscure
bugs in other places that depend on the read being done (or being not
done). To reduce the uncertainty perform the reads unconditionally.
Cc: Mika Kahola <mika.kahola@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-3-git-send-email-imre.deak@intel.com
This check is open-coded in a few places, so it makes sense to simplify
things by having a helper for it similar to the rest of DPCD feature
helpers.
v2: (Jani)
- Move the helper to drm_dp_helper.h.
- Split out this change to a separate patch.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-2-git-send-email-imre.deak@intel.com
When modeset occurs and the LS_CLK is set to some special values in DP
mode, the N/M need to be set manually if audio is playing. Otherwise the
first several seconds may be silent in audio playback.
The relationship of Maud and Naud is expressed in the following
equation:
Maud/Naud = 512 * fs / f_LS_Clk
Please refer VESA DisplayPort Standard spec for details.
v2 by Jani:
- organize Maud/Naud table according to DP 1.4 spec
- add 64k and 128k audio rates
- update HSW_AUD_M_CTS_ENABLE register when Maud not found
- remove extra checks for port clock
- simplify Maud/Naud lookup
- reset patch author back to Libin
Cc: "Zhang, Keqiao" <keqiao.zhang@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: "Lin, Mengdong" <mengdong.lin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477407258-30599-3-git-send-email-jani.nikula@intel.com
The array contains the crtc clock, rely on that. While at it, debug log
the HDMI N value or automatic mode.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: "Lin, Mengdong" <mengdong.lin@intel.com>
Cc: Libin Yang <libin.yang@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477407258-30599-2-git-send-email-jani.nikula@intel.com
Once we've determined that the sink is MST capable we never end up
running through the full detect cycle again, despite getting HPDs.
Fix tht by ripping out the incorrect piece of code responsible.
This got broken when I moved the long HPD handling to the ->detect()
hook, but failed to remove the leftover code.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Rui Tiago Matos <tiagomatos@gmail.com>
Tested-by: Rui Tiago Matos <tiagomatos@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
References: https://bugs.freedesktop.org/show_bug.cgi?id=98306
Fixes: 27d4efc559 ("drm/i915: Move long hpd handling into the hotplug work")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477057478-29328-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Objects can have multiple VMAs used for display in which
case assertion that objects must not be pinned for display
more times than the current VMA is incorrect.
v2: Commit message update. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 058d88c433 ("drm/i915: Track pinned VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com
We do not need to set up a fence for the rotated view.
Display does not need it and no one can access it.
v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 05a20d098d ("drm/i915: Move map-and-fenceable tracking to the VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The current_vgpu will set to NULL after stopping the scheduler when
the reset is triggered by current vgpu, so here need change the
judgement condition for current vgpu detection.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The emulation handler for MMIO GDRST miss vreg write in it, as result
the vreg cannot update correspondingly.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Like other routines, intel_gvt_hypervisor_detect_host returns 0
for success.
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are
pinned in mappable aperture portion of GGTT and for ringbuffer pages
allocated from Stolen memory, access can only be done through GMADR BAR.
In case of GuC based submission, updates done in ringbuffer via GMADR
may not get committed to memory by the time the Command streamer starts
reading them, resulting in fetching of stale data.
For Host based submission, such problem is not there as the write to Ring
Tail or ELSP register happens from the Host side prior to submission.
Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already
enforces the ordering between outstanding GMADR writes & new GTTMADR access.
MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to
registers within GT is contained within GT, so ordering is not enforced
resulting in a race, which can manifest in form of a hang.
To ensure the flush of in-flight GMADR writes, a POSTING READ is done to
GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(),
which takes care of GMADR writes from User space to GEM buffers, but not the
ringbuffer writes from KMD.
This WA is needed on all recent HW.
v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie
in any forcewake domain range and so the overhead of spinlock & search
in the forcewake table is avoidable. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413323-1880-1-git-send-email-akash.goel@intel.com
As well as knowing when the error occurred, it is more interesting to me
to know how long after booting the error occurred, and for good measure
record the time since last hw initialisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161025121602.1457-1-chris@chris-wilson.co.uk
Poking at lock internals is not cool. Since I'm going to change the
implementation this will break, take it out.
Tested-by: Jason Low <jason.low2@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The GuC log buffer flush work item has to do a register access to send the
ack to GuC and this work item, if not synced before suspend, can potentially
get executed after the GFX device is suspended. This work item function uses
rpm get/put calls around the Hw access, which covers the rpm suspend case
but for system suspend a sync would be required as kernel can potentially
schedule the work items even after some devices, including GFX, have been
put to suspend. But sync has to be done only for the system suspend case,
as sync along with rpm get/put can cause a deadlock for rpm suspend path.
To have the sync, but like a NOOP, for rpm suspend path also this work
item could have been queued from the irq handler only when the device is
runtime active & kept active while that work item is pending or getting
executed but an interrupt can come even after the device is out of use and
so can potentially lead to missing of this work item.
By marking the workqueue, dedicated for handling GuC log buffer flush
interrupts, as freezable we don't have to bother about flushing of this
work item from the suspend hooks, the pending work item if any will be
either executed before the suspend or scheduled later on resume. This way
the handling of log buffer flush work item can be kept same between system
suspend & rpm suspend.
Suggested-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
As per the current i915 Driver load sequence, debugfs registration is done
at the end and so the relay channel debugfs file is also created after that
but the GuC firmware is loaded much earlier in the sequence.
As a result Driver could miss capturing the boot-time logs of GuC firmware
if there are flush interrupts from the GuC side.
Relay has a provision to support early logging where initially only relay
channel can be created, to have buffers for storing logs, and later on
channel can be associated with a debugfs file at appropriate time.
Have availed that, which allows Driver to capture boot time logs also,
which can be collected once Userspace comes up.
v2:
- Remove the couple of FIXMEs, as now the relay channel will be created
early before enabling the flush interrupts, so no possibility of relay
channel pointer being modified & read at the same time from 2 different
execution contexts.
- Rebase.
v3:
- Add a comment to justiy setting 'is_global' before the NULL check on the
parent directory dentry pointer.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
To ensure that we always get the up-to-date data from log buffer, its
better to access the buffer through an uncached CPU mapping. Also the way
buffer is accessed from GuC & Host side, manually doing cache flush may
not be effective always if cached CPU mapping is used. In order to avoid
any performance drop & have fast reads from the GuC log buffer, used SSE4.1
movntdqa based memcpy function i915_memcpy_from_wc, as copying using
movntqda from WC type memory is almost as fast as reading from WB memory.
This way log buffer sampling time will not get increased and so would be
able to deal with the flush interrupt storm when GuC is generating logs at
a very high rate.
Ideally SSE 4.1 should be present on all chipsets supporting GuC based
submisssions, but if not then logging will not be enabled.
v2: Rebase.
v3: Squash the WC type vmalloc mapping patch with this patch. (Chris)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
This patch provides debugfs interface i915_guc_output_control for
on the fly enabling/disabling of logging in GuC firmware and controlling
the verbosity level of logs.
The value written to the file, should have bit 0 set to enable logging and
bits 4-7 should contain the verbosity info.
v2: Add a forceful flush, to collect left over logs, on disabling logging.
Useful for Validation.
v3: Besides minor cleanup, implement read method for the debugfs file and
set the guc_log_level to -1 when logging is disabled. (Tvrtko)
v4: Minor cleanup & rebase. (Tvrtko)
v5:
- Lock struct_mutex after the NULL check for guc log buffer vma. (Chris)
- Rebase.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC firmware sends a flush interrupt to Host when the log buffer is half
full and at that time only it updates the log buffer state.
But in certain cases, as described below, it could be useful to have all
that even when log buffer is only partially full. For that there is a force
log buffer flush Host2GuC action supported by GuC firmware.
For Validation requirements, a forceful flush is needed to collect the
left over logs on disabling logging. The same can be done before proceeding
with GPU/GuC reset as there could be some data in log buffer which is yet
to be captured and those logs would be particularly useful to understand
that why the reset was initiated.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Added the dump of GuC log buffer to i915 error state, as the contents of
GuC log buffer would also be useful to determine that why the GPU reset
was triggered.
v2:
- For uniformity use existing helper function print_error_obj() to
dump out contents of GuC log buffer, pretty printing is better left
to userspace. (Chris)
- Skip the dumping of GuC log buffer when logging is disabled as it
won't be of any use.
- Rebase.
v3: Rebase.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In cases where GuC generate logs at a very high rate, correspondingly
the rate of flush interrupts is also very high.
So far total 8 pages were allocated for storing both ISR & DPC logs.
As per the half-full draining protocol followed by GuC, by doubling
the number of pages, the frequency of flush interrupts can be cut down
to almost half, which then helps in reducing the logging overhead.
So now allocating 8 pages apiece for ISR & DPC logs.
This also helps in reducing the output log file size, apart from
reducing the flush interrupt count. With the original settings,
44 KB was needed for one snapshot. With modified settings, 76 KB is
needed for a snapshot which will be equivalent to 2 snapshots of the
original setting. So 12KB saving, every 88 KB, over the original setting.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC firmware sends an interrupt to flush the log buffer when it becomes
half full, so Driver doesn't really need to sample the complete buffer
and can just copy only the newly written data by GuC into the local
buffer, i.e. as per the read & write pointer values.
Moreover the flush interrupt would generally come for one type of log
buffer, when it becomes half full, so at that time the other 2 types of
log buffer would comparatively have much lesser unread data in them.
In case of overflow reported by GuC, Driver do need to copy the entire
buffer as the whole buffer would contain the unread data.
v2: Rebase.
v3: Fix the blooper of doing the copy twice. (Tvrtko)
v4: Add curlies for 'else' case also, matching the 'if'. (Tvrtko)
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC firmware sends an interrupt to flush the log buffer when it
becomes half full. GuC firmware also tracks how many times the
buffer overflowed.
It would be useful to maintain a statistics of how many flush
interrupts were received and for which type of log buffer,
along with the overflow count of each buffer type.
Augmented i915_log_info debugfs to report back these statistics.
v2:
- Update the logic to detect multiple overflows between the 2
flush interrupts and also log a message for overflow (Tvrtko)
- Track the number of times there was no free sub buffer to capture
the GuC log buffer. (Tvrtko)
v3:
- Fix the printf field width for overflow counter, set it to 10 as per the
max value of u32, which takes 10 digits in decimal form. (Tvrtko)
v4:
- Move the log buffer overflow handling to a new function for better
readability. (Tvrtko)
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
With the addition of new Host2GuC actions related to GuC logging, there
is a need of a lock to serialize them, as they can execute concurrently
with each other and also with other existing actions.
v2: Use mutex in place of spinlock to serialize, as sleep can happen
while waiting for the action's response from GuC. (Tvrtko)
v3: To conform to the general rules, acquire mutex before taking the
forcewake. (Tvrtko)
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the
User to capture GuC firmware logs. Availed relay framework to implement
the interface, where Driver will have to just use a relay API to store
snapshots of the GuC log buffer in the buffer managed by relay.
The snapshot will be taken when GuC firmware sends a log buffer flush
interrupt and up to four snapshots could be stored in the relay buffer.
The relay buffer will be operated in a mode where it will overwrite the
data not yet collected by User.
Besides mmap method, through which User can directly access the relay
buffer contents, relay also supports the 'poll' method. Through the 'poll'
call on log file, User can come to know whenever a new snapshot of the
log buffer is taken by Driver, so can run in tandem with the Driver and
capture the logs in a sustained/streaming manner, without any loss of data.
v2: Defer the creation of relay channel & associated debugfs file, as
debugfs setup is now done at the end of i915 Driver load. (Chris)
v3:
- Switch to no-overwrite mode for relay.
- Fix the relay sub buffer switching sequence.
v4:
- Update i915 Kconfig to select RELAY config. (TvrtKo)
- Log a message when there is no sub buffer available to capture
the GuC log buffer. (Tvrtko)
- Increase the number of relay sub buffers to 8 from 4, to have
sufficient buffering for boot time logs
v5:
- Fix the alignment, indentation issues and some minor cleanup. (Tvrtko)
- Update the comment to elaborate on why a relay channel has to be
associated with the debugfs file. (Tvrtko)
v6:
- Move the write to 'is_global' after the NULL check on parent directory
dentry pointer. (Tvrtko)
v7: Add a BUG_ON to validate relay buffer allocation size. (Chris)
Testcase: igt/tools/intel_guc_logger
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC ukernel sends an interrupt to Host to flush the log buffer
and expects Host to correspondingly update the read pointer
information in the state structure, once it has consumed the
log buffer contents by copying them to a file or buffer.
Even if Host couldn't copy the contents, it can still update the
read pointer so that logging state is not disturbed on GuC side.
v2:
- Use a dedicated workqueue for handling flush interrupt. (Tvrtko)
- Reduce the overall log buffer copying time by skipping the copy of
crash buffer area for regular cases and copying only the state
structure data in first page.
v3:
- Create a vmalloc mapping of log buffer. (Chris)
- Cover the flush acknowledgment under rpm get & put.(Chris)
- Revert the change of skipping the copy of crash dump area, as
not really needed, will be covered by subsequent patch.
v4:
- Destroy the wq under the same condition in which it was created,
pass dev_piv pointer instead of dev to newly added GuC function,
add more comments & rename variable for clarity. (Tvrtko)
v5:
- Allocate & destroy the dedicated wq, for handling flush interrupt,
from the setup/teardown routines of GuC logging. (Chris)
- Validate the log buffer size value retrieved from state structure
and do some minor cleanup. (Tvrtko)
- Fix error/warnings reported by checkpatch. (Tvrtko)
- Rebase.
v6:
- Remove the interrupts_enabled check from guc_capture_logs_work, need
to process that last work item also, queued just before disabling the
interrupt as log buffer flush interrupt handling is a bit different
case where GuC is actually expecting an ACK from host, which should be
provided to keep the logging going.
Sync against the work will be done by caller disabling the interrupt.
- Don't sample the log buffer size value from state structure, directly
use the expected value to move the pointer & do the copy and that cannot
go wrong (out of bounds) as Driver only allocated the log buffer and the
relay buffers. Driver should refrain from interpreting the log packet,
as much possible and let Userspace parser detect the anomaly. (Chris)
v7:
- Use switch statement instead of 'if else' for retrieving the GuC log
buffer size. (Tvrtko)
- Refactored the log buffer copying function and shortended the name of
couple of variables for better readability. (Tvrtko)
v8:
- Make the dedicated wq as a high priority one to further reduce the
turnaround time of handing log buffer flush event from GuC.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
There are certain types of interrupts which Host can receive from GuC.
GuC ukernel sends an interrupt to Host for certain events, like for
example retrieve/consume the logs generated by ukernel.
This patch adds support to receive interrupts from GuC but currently
enables & partially handles only the interrupt sent by GuC ukernel.
Future patches will add support for handling other interrupt types.
v2:
- Use common low level routines for PM IER/IIR programming (Chris)
- Rename interrupt functions to gen9_xxx from gen8_xxx (Chris)
- Replace disabling of wake ref asserts with rpm get/put (Chris)
v3:
- Update comments for more clarity. (Tvrtko)
- Remove the masking of GuC interrupt, which was kept masked till the
start of bottom half, its not really needed as there is only a
single instance of work item & wq is ordered. (Tvrtko)
v4:
- Rebase.
- Rename guc_events to pm_guc_events so as to be indicative of the
register/control block it is associated with. (Chris)
- Add handling for back to back log buffer flush interrupts.
v5:
- Move the read & clearing of register, containing Guc2Host message
bits, outside the irq spinlock. (Tvrtko)
v6:
- Move the log buffer flush interrupt related stuff to the following
patch so as to do only generic bits in this patch. (Tvrtko)
- Rebase.
v7:
- Remove the interrupts_enabled check from gen9_guc_irq_handler, want to
process that last interrupt also before disabling the interrupt, sync
against the work queued by irq handler will be done by caller disabling
the interrupt.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
So far PM IER/IIR/IMR registers were being used only for Turbo related
interrupts. But interrupts coming from GuC also use the same set.
As a precursor to supporting GuC interrupts, added new low level routines
so as to allow sharing the programming of PM IER/IIR/IMR registers between
Turbo & GuC.
Also similar to PM IMR, maintaining a bitmask for PM IER register, to allow
easy sharing of it between Turbo & GuC without involving a rmw operation.
v2:
- For appropriateness & avoid any ambiguity, rename old functions
enable/disable pm_irq to mask/unmask pm_irq and rename new functions
enable/disable pm_interrupts to enable/disable pm_irq. (Tvrtko)
- Use u32 in place of uint32_t. (Tvrtko)
v3:
- Rename the fields pm_irq_mask & pm_ier_mask and do some cleanup. (Chris)
- Rebase.
v4: Fix the inadvertent disabling of User interrupt for VECS ring causing
failure for certain IGTs.
v5: Use dev_priv with HAS_VEBOX macro. (Tvrtko)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
So far there were 2 fields related to GuC logs in 'intel_guc' structure.
For the support of capturing GuC logs & storing them in a local buffer,
multiple new fields would have to be added. This warrants a separate
structure to contain the fields related to GuC logging state.
Added a new structure 'intel_guc_log' and instance of it inside
'intel_guc' structure.
v2: Rebase.
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The first page of the GuC log buffer contains state info or meta data
which is required to parse the logs contained in the subsequent pages.
The structure representing the state info is added to interface file
as Driver would need to handle log buffer flush interrupts from GuC.
Added an enum for the different message/event types that can be send
by the GuC ukernel to Host.
Also added 2 new Host to GuC action types to inform GuC when Host has
flushed the log buffer and forcefuly cause the GuC to send a new
log buffer flush interrupt.
v2:
- Make documentation of log buffer state structure more elaborate &
rename LOGBUFFERFLUSH action to LOG_BUFFER_FLUSH for consistency.(Tvrtko)
v3: Add GuC log buffer layout diagram for more clarity.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
GuC Log buffer allocation was tied up with verbosity level module param
i915.guc_log_level. User would be given a provision to enable firmware
logging at runtime, through a host2guc action, and not necessarily during
Driver load time. But the address of log buffer can be passed only in
init params, at firmware load time, so GuC has to be reset and firmware
needs to be reloaded to pass the log buffer address at runtime.
To avoid reset of GuC & reload of firmware, allocation of log buffer will
be done always but logging would be enabled initially on GuC side based on
the value of module parameter guc_log_level.
v2: Update commit message to describe the constraint with allocation of
log buffer at runtime. (Tvrtko)
v3: Rebase.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Backmerge because Chris Wilson needs the very latest&greates of
Gustavo Padovan's sync_file work, specifically the refcounting changes
from:
commit 30cd85dd6e
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date: Wed Oct 19 15:48:32 2016 -0200
dma-buf/sync_file: hold reference to fence when creating sync_file
Also good to sync in general since git tends to get confused with the
cherry-picking going on.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This check is open-coded in a few places, so it makes sense to simplify
things by having a helper for it similar to the rest of DPCD feature
helpers.
v2: (Jani)
- Move the helper to drm_dp_helper.h.
- Split out this change to a separate patch.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-2-git-send-email-imre.deak@intel.com
- first slice of the gvt device model (Zhenyu et al)
- compression support for gpu error states (Chris)
- sunset clause on gpu errors resulting in dmesg noise telling users
how to report them
- .rodata diet from Tvrtko
- switch over lots of macros to only take dev_priv (Tvrtko)
- underrun suppression for dp link training (Ville)
- lspcon (hmdi 2.0 on skl/bxt) support from Shashank Sharma, polish
from Jani
- gen9 wm fixes from Paulo&Lyude
- updated ddi programming for kbl (Rodrigo)
- respect alternate aux/ddc pins (from vbt) for all ddi ports (Ville)
* tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (227 commits)
drm/i915: Update DRIVER_DATE to 20161024
drm/i915: Stop setting SNB min-freq-table 0 on powersave setup
drm/i915/dp: add lane_count check in intel_dp_check_link_status
drm/i915: Fix whitespace issues
drm/i915: Clean up DDI DDC/AUX CH sanitation
drm/i915: Respect alternate_ddc_pin for all DDI ports
drm/i915: Respect alternate_aux_channel for all DDI ports
drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7
drm/i915: KBL - Recommended buffer translation programming for DisplayPort
drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup
drm/i915: Add a sunset clause to GPU hang logging
drm/i915: Stop reporting error details in dmesg as well as the error-state
drm/i915/gvt: do not ignore return value of create_scratch_page
drm/i915/gvt: fix spare warnings on odd constant _Bool cast
drm/i915/gvt: mark symbols static where possible
drm/i915/gvt: fix sparse warnings on different address spaces
drm/i915/gvt: properly access enabled intel_engine_cs
drm/i915/gvt: Remove defunct vmap_batch()
drm/i915/gvt: Use common mapping routines for shadow_bb object
drm/i915/gvt: Use common mapping routines for indirect_ctx object
...
First -misc pull for 4.10:
- drm_format rework from Laurent
- reservation patches from Chris that missed 4.9.
- aspect ratio support in infoframe helpers and drm mode/edid code
(Shashank Sharma)
- rotation rework from Ville (first parts at least)
- another attempt at the CRC debugfs interface from Tomeu
- piles and piles of misc patches all over
* tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (55 commits)
drm: Use u64 for intermediate dotclock calculations
drm/i915: Use the per-plane rotation property
drm/omap: Use per-plane rotation property
drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0
drm/atmel-hlcdc: Use per-plane rotation property
drm/arm: Use per-plane rotation property
drm: Add support for optional per-plane rotation property
drm/atomic: Reject attempts to use multiple rotation angles at once
drm: Add drm_rotation_90_or_270()
dma-buf/sync_file: hold reference to fence when creating sync_file
drm/virtio: kconfig: Fixup white space.
drm/fence: release fence reference when canceling event
drm/i915: Handle early failure during intel_get_load_detect_pipe
drm/fb_cma_helper: do not free fbdev if there is none
drm: fix sparse warnings on undeclared symbols in crc debugfs
gpu: Remove depends on RESET_CONTROLLER when not a provider
i915: don't call drm_atomic_state_put on invalid pointer
drm: Don't export the drm_fb_get_bpp_depth() function
drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()
drm: vmwgfx: Replace drm_fb_get_bpp_depth() with drm_format_info()
...
Linux PCI driver saves the msi and msix capability offset
in pci_dev->msi_cap and pci_dev->msix_cap. We can use msi_cap
in pci_dev directly, no need hardcode.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Macro set_mask_bits() is ready for us, just invoke it and remove
our write_bits().
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It is better to use %p format for void pointers instead of casting them
because a void* is not necessary a 64 bits value.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Since ioread32 returns a 32-bit value, it is impossible to left-shift
this value by 32 bits (it produces a compilation error). Casting the
return value of ioread32 fix this issue.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Broadwell and newer actually compress up to 2560 lines instead of 2048
(as documented in the FBC_CTL page). If we don't take this into
consideration we end up reserving too little stolen memory for the
CFB, so we may allocate something else (such as a ring) right after
what we reserved, and the hardware will overwrite it with the contents
of the CFB when FBC is active, causing GPU hangs. Another possibility
is that the CFB may be allocated at the very end of the available
space, so the CFB will overlap the reserved stolen area, leading to
FIFO underruns.
This bug has always been a problem on BDW (the only affected platform
where FBC is enabled by default), but it's much easier to reproduce
since the following commit:
commit c58b735fc7
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Aug 18 17:16:57 2016 +0100
drm/i915: Allocate rings from stolen
Of course, you can only reproduce the bug if your screen is taller
than 2048 lines.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213
Fixes: a98ee79317 ("drm/i915/fbc: enable FBC by default on HSW and BDW")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com
At the moment, we have dependency on the RPM as a barrier itself in both
i915_gem_release_all_mmaps() and i915_gem_restore_fences().
i915_gem_restore_fences() is also called along !runtime pm paths, but we
can move the markup of lost fences alongside releasing the mmaps into a
common i915_gem_runtime_suspend(). This has the advantage of locating
all the tricky barrier dependencies into one location.
v2: Just mark the fence as invalid (fence->dirty) so that upon waking we
will be sure to clear the fence after use, or restore it to the correct
value before use. This makes sure that if the fence is left intact
across the sleep, we do not leave it pointing to a region of GTT for the
next unsuspecting user.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Imre Deak <imre.deak@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-5-chris@chris-wilson.co.uk
We only used the RPM sequence checking inside the lowlevel GTT
accessors, when we had to rely on callers taking the wakeref on our
behalf. Now that we take the RPM wakeref inside the GTT management
routines themselves, we can forgo the sanitycheck of the callers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-4-chris@chris-wilson.co.uk
Now that we have reduced the access to the list to either (a) under the
struct_mutex whilst holding the RPM wakeref (so that concurrent writers to
the list are serialised by struct_mutex) and (b) under the atomic
runtime suspend (which cannot run concurrently with any other accessor due
to the atomic nature of the runtime suspend) we can remove the extra
locking around the list itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-3-chris@chris-wilson.co.uk
We can remove the false coupling between RPM and struct mutex by the
observation that we can use the RPM wakeref as the barrier around user
mmap access. That is as we tear down the user's PTE atomically from
within rpm suspend and then to fault in new PTE requires the rpm
wakeref, means that no user access is possible through those PTE without
RPM being awake. Having made that observation, we can then remove the
presumption of having to take rpm outside of struct_mutex and so allow
fine grained acquisition of a wakeref around hw access rather than
having to remember to acquire the wakeref early on.
v2: Rejig placement of the new intel_runtime_pm_get() to be as tight
as possible around the GTT pread/pwrite.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-2-chris@chris-wilson.co.uk
We want to decouple RPM and struct_mutex, but currently RPM has to walk
the list of bound objects and remove userspace mmapping before we
suspend (otherwise userspace may continue to access the GTT whilst it is
powered down). This currently requires the struct_mutex to walk the
bound_list, but if we move that to a separate list and lock we can take
the first step towards removing the struct_mutex.
v2: Split runtime suspend unmapping vs regular unmapping, to make the
locking (and barriers) clearer. Add the object to the userfault_list
prior to inserting the first PTE, the race between add/revoke depends
upon struct_mutex for regular unmappings and rpm for runtime-suspend.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-1-chris@chris-wilson.co.uk
The previous code would wait for fences on the framebuffer from the old
plane state to complete, rather than the new, so you would see tearing
everywhere. Fix this to wait on the new state before we make it active.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 94f050246b ("drm/i915: nonblocking commit")
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com
When invalidating RCS TLB the device can enter RC6 state interrupting
the process, therefore the need for render forcewake for the whole
procedure.
This WA is needed for all production SKL SKUs.
v2: reworked putting and getting forcewake with help of Mika Kuoppala
v3: use I915_READ_FW and I915_WRITE_FW as we are handling forcewake on
in the code path
References: HSD#2136899, HSD#1404391274
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We currently don't support GVT-g driver on i386 kernel.
Add explicit dependence on 64bit kernel.
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The min-freq-table is an array of values that match each CPU frequency to
an equivalent GPU frequency. Setting a single value of 0 on init is both
illegal (generates an error from the PCU) and nonsensical. Let's see if
we survive without that error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021205531.8651-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
On certain platforms not all planes support the same set of
rotations/reflections, so let's use the per-plane property
for this.
This is already a problem on SKL when we use the legay cursor plane
as it only supports 0|180 whereas the universal planes support
0|90|180|270, and it will be a problem on CHV soon.
v2: Use drm_plane_create_rotation_property() helper
v3: Drop the BIT(), use INTEL_GEN()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-12-git-send-email-ville.syrjala@linux.intel.com
We have intel_rotation_90_or_270() in i915 to check if the rotation is
90 or 270 degrees. Similar checks are elsewhere in drm, so let's move
the helper into a central place and use it everwhere.
v2: Drop the BIT()
Convert all new intel_rotation_90_or_270() calls
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
Currently it's entirely possible to go through the link training step
without first determining the lane_count, which is silly since we end up
doing a bunch of aux transfers of size = 0, as highlighted by
WARN_ON(!msg->buffer != !msg->size), and can only ever result in a
'failed to update link training' message. This can be observed during
intel_dp_long_pulse where we can do the link training step, but before
we have had a chance to set the link params. To avoid this we add an
extra check for the lane_count in intel_dp_check_link_status, which
should prevent us from doing the link training step prematurely.
v2: add WARN_ON_ONCE and FIXME comment (Ville)
References: https://bugs.freedesktop.org/show_bug.cgi?id=97344
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476912593-10019-1-git-send-email-matthew.auld@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Now that we use the AUX and GMBUS assignment from VBT for all ports,
let's clean up the sanitization of the port information a bit.
Previosuly we only did this for port E, and only complained about a
non-standard assignment for the other ports. But as we know that
non-standard assignments are a fact of life, let's expand the
sanitization to all the ports.
v2: Include a commit message, fix up the comments a bit
v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (v2)
The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.
I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.
v2: Include a commit message, include a debug message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
The VBT provides the platform a way to mix and match the DDI ports vs.
AUX channels. Currently we only trust the VBT for DDI E, which has no
corresponding AUX channel of its own. However it is possible that some
board might use some non-standard DDI vs. AUX port routing even for
the other ports. Perhaps for signal routing reasons or something,
So let's generalize this and trust the VBT for all ports.
For now we'll limit this to DDI platforms, as we trust the VBT a bit
more there anyway when it comes to the DDI ports. I've structured
the code in a way that would allow us to easily expand this to
other platforms as well, by simply filling in the ddi_port_info.
v2: Drop whitespace changes, keep MISSING_CASE() for unknown
aux ch assignment, include a commit message, include debug
message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Dropping WA because it was for early steppings.
It is fixed in newer preproduction and all production revisions.
v2: add references, updated commit message
References: HSD#2126385, HSD#2131381, BSID#0764
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476977460-28088-1-git-send-email-arkadiusz.hiler@intel.com
According to spec: "KBL re-uses SKL values, except where
specific KBL values are listed."
And recently spec has changed adding different table for Display Port only.
But for all SKUs (H,S,U,Y) we have slightly different values.
v2: Fix wrong condition spotted by Jani.
v3: Fix 7th entry of KBL H and S table - by Manasi.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476806256-13318-1-git-send-email-rodrigo.vivi@intel.com
No functional change.
Only moving this fixup block out of ddi_translation definitions
so we can split skl and kbl cleanly.
v2: Remove useless comment. (Ville)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475258757-29540-1-git-send-email-rodrigo.vivi@intel.com
gvt-next-fix-2016-10-20
This contains fix for first pull request.
- clean up header mess between i915 core and gvt
- new MAINTAINERS item
- new kernel-doc section
- fix compiling warnings
- gvt gem fix series from Chris
- fix for i915 intel_engine_cs change
- some sparse fixes from Changbin
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
If the kernel is old, more than a few releases old, chances are that the
user is using an old kernel for a good reason, despite there being GPU
hangs. After 180days since driver release stop suggesting that they
should send those reports upstream.
[Since Daniel acked this I expect he will pick up the dim patch to
automatically update the DRIVER_TIMESTAMP everytime we tag a new
release.]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014134428.29582-1-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As we already capture all the information from the registers into the
error-state, also dumping that to dmesg just generates noise that upsets
CI and users alike (and doesn't provide us with any more information).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161019125203.28851-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Function create_scratch_page() may fail in some cases.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The function return values should has type int if it return
a integer value.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Mark all local functions & variables as static.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add proper __iomem annotation for pointers obtained via ioremap().
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Switch to use new for_each_engine() helper to properly access
enabled intel_engine_cs as i915 core has changed that to be
dynamic managed. At GVT-g init time would still depend on ring
mask to determine engine list as it's earlier.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This code was removed from i915_cmd_parser.c but still an obsolete
version wound up being duplicated into gvt/cmd_parser.c. Good riddance.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We have the ability to map an object, so use it rather than opencode it
badly. Note that the object remains permanently pinned, this is poor
practise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We have the ability to map an object, so use it rather than opencode it
badly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
For whatever reason, the gvt scheduler runs synchronously. At the very
least, lets run synchronously without holding the struct_mutex.
v2: cut'n'paste mutex_lock instead of unlock.
Replace long hold of struct_mutex with a mutex to serialise the worker
threads.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The kthread will not be interrupted, don't even bother checking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The workload took a pointer to the request, and even waited upon,
without holding a reference on the request. Take that reference
explicitly and fix up the error path following request allocation that
missed flushing the request.
v2: [zhenyuw]
- drop request put in error path for dispatch, as main thread
caller will handle it identically to a real request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Unpinning the pages prior to the object being release from the GPU may
allow the GPU to read and write into system pages (i.e. use after free
by the hw).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The purpose of returning the just-pinned VMA is so that we can use the
information within, like its address. Also it should be tracked and used
as the cookie to unpin...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
On failure from i915_gem_object_create(), we need to check for an error
pointer not NULL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Manipulating the fence_list requires the runtime wakelock, as does
writing to the fence registers. Acquire a wakelock for the former, and
assert that the device is awake for the latter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Update with brief overview and reference for more detailed
arch design documents.
Add new section for Intel GVT-g host support.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
i915 core should only call functions and structures exposed through
intel_gvt.h. Remove internal gvt.h and i915_pvinfo.h.
Change for internal intel_gvt structure as private handler which
not requires to expose gvt internal structure for i915 core.
v2: Fix per Chris's comment
- carefully handle dev_priv->gvt assignment
- add necessary bracket for macro helper
- forward declartion struct intel_gvt
- keep free operation within same file handling alloc
v3: fix use after free and remove intel_gvt.initialized
v4: change to_gvt() to an inline
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Wrapping strings is against the guidelines in Documentation/CodingStyle,
chapter 2.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-11-git-send-email-cpaul@redhat.com
Thanks to Paulo Zanoni for indirectly pointing this out.
Looks like we never actually added any code for checking whether or not
we actually wrote watermark levels properly. Let's fix that.
Changes since v1:
- Use %u instead of %d when printing WM state mismatches
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-10-git-send-email-cpaul@redhat.com
Helper we're going to be using for implementing verification of the wm
levels in skl_verify_wm_level().
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-9-git-send-email-cpaul@redhat.com
There's not much of a reason this should have the locations to read out
the hardware state hardcoded, so allow the caller to specify the
location and add this function to intel_drv.h. As well, we're going to
need this function to be reusable for the next patch.
Changes since v1:
- Fix accidental behavior change in the code that Paulo pointed out
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-8-git-send-email-cpaul@redhat.com
Finally, add some debugging output for ddb changes in the atomic debug
output. This makes it a lot easier to spot bugs from incorrect ddb
allocations.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476480722-13015-7-git-send-email-cpaul@redhat.com
Now that we've make skl_wm_levels make a little more sense, we can
remove all of the redundant wm information. Up until now we'd been
storing two copies of all of the skl watermarks: one being the
skl_pipe_wm structs, the other being the global wm struct in
drm_i915_private containing the raw register values. This is confusing
and problematic, since it means we're prone to accidentally letting the
two copies go out of sync. So, get rid of all of the functions
responsible for computing the register values and just use a single
helper, skl_write_wm_level(), to convert and write the new watermarks on
the fly.
Changes since v1:
- Fixup skl_write_wm_level()
- Fixup skl_wm_level_from_reg_val()
- Don't forget to copy *active to intel_crtc->wm.active.skl
Changes since v2:
- Fix usage of wrong cstate
Changes since v3 (by Paulo):
- Rebase
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v2)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476814189-6062-1-git-send-email-paulo.r.zanoni@intel.com
The STOP_MACHINE kconfig symbol was removed upstream after making
stop_machine() always work, commit 86fffe4a61 ("kernel: remove
stop_machine() Kconfig dependency"), and was removed from i915's Kconfig
in commit 21fabbebff ("drm/i915: Remove select to deleted
STOP_MACHINE from Kconfig").
However, I accidentally reintroduced the select when rebasing an older
commit that also was dependent upon a working stop_machine.
Fixes: 9f267eb8d2 ("drm/i915: Stop the machine whilst capturing...")
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161019180635.27459-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This removes the 'write' and 'force' from get_user_pages_remote() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes sparse warning:
drivers/gpu/drm/i915/intel_lspcon.c:30:22: warning: symbol
'lspcon_get_current_mode' was not declared. Should it be static?
Fixes: dbe9e61b8e ("drm/i915: Add lspcon support for I915 driver")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476789711-19697-2-git-send-email-jani.nikula@intel.com
After printing our welcome message to the user, also include
supplementary details on what debugging is enabled (useful for us to
sanity check what extra safeguards are on for any random kernel).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014132707.29039-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com
The introduction of reference counting on the state structures caused
sanitize_watermarks() in i915 to break in the error handling case,
as pointed out by gcc -Wmaybe-uninitialized
drivers/gpu/drm/i915/intel_display.c: In function ‘intel_modeset_init’:
include/drm/drm_atomic.h:224:2: error: ‘state’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
This changes the function back to only drop the reference count
when it was successfully allocated first.
Fixes: 0853695c3b ("drm: Add reference counting to drm_atomic_state")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018151652.2690201-1-arnd@arndb.de
When handling execbuf relocations, we play a delicate dance with
pagefault. We first try to access the user pages underneath our
struct_mutex. However, if those pages were inside a GEM object, we may
trigger a pagefault and deadlock as i915_gem_fault() tries to
recursively acquire struct_mutex. Instead, we choose to disable
pagefaulting around the copy_from_user whilst inside the struct_mutex
and handle the EFAULT by falling back to a copy outside the
struct_mutex.
We however presumed that disabling pagefaults would be expensive. It is
just an operation on the local current task. Cheap enough that we can
restrict the disable/enable to the critical section around the copy, and
so avoid having to handle the atomic sections within the relocation
handling itself.
v2: Just illustrate the broken error handling rather than argue why it
is safer to ignore it, for now.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018120251.25043-4-chris@chris-wilson.co.uk
The scattergather list uses a 32bit size counter, we should avoid
exceeding it.
v2: Also we should use unsigned int to match sg->length.
Fixes: 871dfbd67d ("drm/i915: Allow compaction upto SWIOTLB max segment size")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018120251.25043-3-chris@chris-wilson.co.uk
In many places, we try to count pages using a 32 bit integer. That
implies if we are asked to create an object larger than 43bits, we will
subtly crash much later. Catch this on the boundary, and add a warning
to remind ourselves later on our exabyte systems.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018120251.25043-2-chris@chris-wilson.co.uk
Internally we allow for using more objects than a single process can
allocate, i.e. we allow for a 64bit GPU address space even on a 32bit
system. Using size_t may oveerflow.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018120251.25043-1-chris@chris-wilson.co.uk
We used to call skl_pipe_pixel_rate(), which used to be a single
one-line return, but now we're calling ilk_pipe_pixel_rate() which is
not as simple, so it's better to just call it once and store the
computed value for reuse.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-2-git-send-email-paulo.r.zanoni@intel.com
i915.enable_guc_loading/submission=2 forces the usage of GuC.
For platforms that do not have a GuC, asking the kernel to use a GuC
should not result in an error state. Do extra checks to see if the
platform even has a GuC or not, regardless of the kernel parameter.
v2: Based on Rodrigo's patch and Paulo's suggestion(Paulo, Rodrigo)
v3: Correct the Indentation(Jani, Paulo)
v4: Added the blank line(Jani, Paulo)
v5 (from Paulo): Remove the extra blank line.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97573
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Zanoni Paulo <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476488825-5673-1-git-send-email-anusha.srivatsa@intel.com
As per the software design, we are driving lspcon in
PCON mode. But while resuming from suspend, lspcon can go
in LS mode (which is its default operating mode on power on)
This patch adds a resume function for lspcon, which makes sure
its operating in PCON mode, post resume.
V2: Address review comments from Imre
- move lspcon_resume call to encoder->reset()
- use early returns
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-6-git-send-email-shashank.sharma@intel.com
This patch adds initialization code for lspcon.
What we are doing here is:
- Check if lspcon is configured in VBT for this port
- If lspcon is configured, initialize it and configure it
as DP port.
V2: Addressed Ville's review comments:
- Not adding AVI IF functions for LSPCON display now.
This part will be added once the dig_port level AVI-IF series
gets merged.
V3: Rebase
V4: Rebase
V5: Rebase
V6: Rebase
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-5-git-send-email-shashank.sharma@intel.com
Many GEN9 boards come with on-board lspcon cards.
Fot these boards, VBT configuration should properly point out
if a particular port contains lspcon device, so that driver can
initialize it properly.
This patch adds a utility function, which checks the VBT flag
for lspcon bit, and tells us if a port is configured to have a
lspcon device or not.
V2: Fixed review comments from Ville
- Do not forget PORT_D while checking lspcon for GEN9
V3: Addressed review comments from Rodrigo
- Create a HAS_LSPCON() macro for better use case handling.
- Do not dump warnings for non-gen-9 platforms, it will be noise.
V4: Rebase
V5: Rebase
V6: Pass dev_priv to HAS_LSPCON() macro
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-4-git-send-email-shashank.sharma@intel.com
This patch adds a new file, to accommodate lspcon support
for I915 driver. These functions probe, detect, initialize
and configure an on-board lspcon device during the driver
init time.
Also, this patch adds a small structure for lspcon device,
which will provide the runtime status of the device.
V2: addressed ville's review comments
- Clean the leftover macros from previous patch set
V3: Rebase
V4: addressed ville's review comments
- make internal functions static
- remove lspcon_detect_identifier, make it inline with lspcon_probe
- remove is_lspcon_active function
- remove force check while setting a lspcon mode
V5: Rebase
V6: Pass dev_priv to IS_GEN9 check
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-3-git-send-email-shashank.sharma@intel.com
GMBUS is part of the display engine, and thus has no need for
forcewake. Let's not bother trying to grab it then.
I don't recall if the display engine suffers from system hangs
due to multiple accesses to the same "cacheline" in mmio space.
I hope not since we're no longer protected by the uncore lock
since commit 4e6c2d58ba ("drm/i915: Take forcewake once for
the entire GMBUS transaction")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476272687-15070-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Zhenyu Wang writes:
This is first pull request to merge GVT-g device model in i915
which contains core GVT-g device model work to virtualize GPU
resources. This tries to add feature of Intel GVT-g technology
for full GPU virtualization. This version will support KVM based
virtualization solution named as KVMGT.
More background is on official project home: https://01.org/igvt-g
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
drm_atomic_state has a complicated single owner model that tracks the
single reference from allocation through to destruction on another
thread - or perhaps on a local error path. We can simplify this tracking
by using reference counting (at a cost of a few more atomics). This is
even more beneficial when the lifetime of the state becomes more
convoluted than being passed to a single worker thread for the commit.
v2: Double check !intel atomic_commit functions for missing gets
v3: Update kerneldocs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
This function is a wreck, let's help it get its life back together and
cleanup all of the copy pasta here.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Having skl_wm_level contain all of the watermarks for each plane is
annoying since it prevents us from having any sort of object to
represent a single watermark level, something we take advantage of in
the next commit to cut down on all of the copy paste code in here.
Changes since v1:
- Style nitpicks
- Fix accidental usage of i vs. PLANE_CURSOR
- Split out skl_pipe_wm_active_state simplification into separate patch
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Next part of cleaning up the watermark code for skl. This is easy, since
it seems that we never actually needed to keep track of the linetime in
the skl_wm_values struct anyway.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
First part of cleaning up all of the skl watermark code. This moves the
structures for storing the ddb allocations of each pipe into
intel_crtc_state, along with moving the structures for storing the
current ddb allocations active on hardware into intel_crtc.
Changes since v1:
- Don't replace alloc->start = alloc->end = 0;
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
I have re-ordered some struct members in patch:
commit 44a655cae3
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Thu Oct 13 11:09:23 2016 +0100
drm/i915: Shrink cxsr_latency_table
but that particular one is not initialized with named
initializers which broke it.
Move the bitfields back at the beginning. Space saving
is still there.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 44a655cae3 ("drm/i915: Shrink cxsr_latency_table")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476453302-7580-1-git-send-email-tvrtko.ursulin@linux.intel.com
Since "Dynamic page table allocations" were introduced, our page tables
can grow (being dynamically allocated) with address space range usage.
Unfortunately, their lifetime is bound to vm. This is not a huge problem
when we're not using softpin - drm_mm is creating an upper bound on used
range by causing addresses for our VMAs to eventually be reused.
With softpin, long lived contexts can drain the system out of memory
even with a single "small" object. For example:
bo = bo_alloc(size);
while(true)
offset += size;
exec(bo, offset);
Will cause us to create new allocations until all memory in the system
is used for tracking GPU pages (even though almost all PTEs in this vm
are pointing to scratch).
Let's free unused page tables in clear_range to prevent this - if no
entries are used, we can safely free it and return this information to
the caller (so that higher-level entry is pointing to scratch).
v2: Document return value and free semantics (Joonas)
v3: No newlines in vars block (Joonas)
v4: Drop redundant local 'reduce' variable
v5: Handle CI fail with enable_ppgtt=2
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-3-git-send-email-michal.winiarski@intel.com
Let's use more top-down approach, where each gen8_ppgtt_clear_* function
is responsible for clearing the struct passed as an argument and calling
relevant clear_range functions on lower-level tables.
Doing this rather than operating on PTE ranges makes the implementation
of shrinking page tables quite simple.
v2: Drop min when calculating num_entries, no negation in 48b ppgtt
check, no newlines in vars block (Joonas)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-2-git-send-email-michal.winiarski@intel.com
We never used any invalid ptes, those were put in place for
a possibility of doing gpu faults. However our batchbuffers are not
restricted in length, so everything needs to be pointing to something
and thus out-of-bounds is pointing to scratch.
Remove the valid flag as it is always true.
v2: Expand commit msg, patch reorder (Mika)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-1-git-send-email-michal.winiarski@intel.com
Currently the display INIT power domain disabling/enabling happens in a
mismatched way in the suspend/resume_early hooks respectively. This can
leave display power wells incorrectly disabled in the resume hook if the
suspend sequence is aborted for some reason resulting in the
suspend/resume hooks getting called but the suspend_late/resume_early
hooks being skipped. In particular this change fixes "Unclaimed read
from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()->
intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set
to devices.
Fixes: 85e9067933 ("drm/i915: disable power wells on suspend")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com
Saves 944 bytes of .rodata strings and 128 bytes of .text.
v2: Add parantheses around dev_priv. (Ville Syrjala)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Saves 864 bytes of .rodata strings and ~100 of .text.
v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Saves 1392 bytes of .rodata strings.
Also change a few function/macro prototypes in i915_gem_gtt.c
from dev to dev_priv where it made more sense to do so.
v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Mention function prototype changes. (David Weinehall)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Saves 1016 bytes of .rodata strings and couple hundred of .text.
v2: Add parantheses around dev_priv. (Ville Syrjala)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
