If CONFIG_REGMAP_SLIMBUS is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-,
will be failed, like this:
sound/soc/codecs/wcd934x.o: In function `wcd934x_codec_probe':
wcd934x.c:(.text+0x3310): undefined reference to `__regmap_init_slimbus'
make: *** [vmlinux] Error 1
Add select REGMAP_SLIMBUS to config SND_SOC_WCD934X.
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926074042.13297-1-renzhijie2@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pcm_pointer callback for mt8195 to support read
host position from DSP
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220924033559.26599-3-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pcm_hw_params callback for mt8195 to support continue
update dma host position
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220924033559.26599-2-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use __GFP_RETRY_MAYFAIL instead of __GFP__NORETRY in
snd_dma_dev_alloc(), snd_dma_wc_alloc() and friends, to allocate pages
for device memory. The MAYFAIL flag retains the semantics of not
triggering the OOM killer, but lowers the risk of alloc failure.
MAYFAIL flag was added in commit dcda9b0471 ("mm, tree wide: replace
__GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic").
This change addresses recurring failures with SOF audio driver in test
cases where a system suspend-resume stress test is run, combined with an
active high memory-load use-case. The failure typically shows up as:
[ 379.480229] sof-audio-pci-intel-tgl 0000:00:1f.3: booting DSP firmware
[ 379.484803] sof-audio-pci-intel-tgl 0000:00:1f.3: error: memory alloc failed: -12
[ 379.484810] sof-audio-pci-intel-tgl 0000:00:1f.3: error: dma prepare for ICCMAX stream failed
Multiple fixes to reduce the memory usage of DSP boot have been
identified in SOF driver, but even with those fixes, debug on affected
systems has shown that even a single page alloc may fail with
__GFP_NORETRY. When this occurs, system is under significant load on
physical memory, but a lot of reclaimable pages are available, so the
system has not run out of memory. With __GFP_RETRY_MAYFAIL, the errors
are not hit in these stress tests.
The alloc failure is severe as audio capability is completely lost if
alloc failure is hit at system resume.
An alternative solution was considered where the resources for DSP boot
would be kept allocated until driver is unbound. This would avoid the
allocation failure, but consume memory that is only needed temporarily
at probe and resume time. It seems better to not hang on to the memory,
but rather work a bit harder for allocating the pages at resume.
BugLink: https://github.com/thesofproject/linux/issues/3844
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220923153501.3326041-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current hardware has up to 4 converters. Save little space.
The limit 8 is enough even for a more improved hardware.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220923082236.61024-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
On Intel platforms the registers for DSP communications are used differently,
the IPC dump information is not correct since important registers are not
printed and existing ones are used a bit differently for IPC4.
As a last step, enable the IPC timeout 'handling' and allow the printout of
the now usefull IPC dump.
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support for SM8450 and SC8280XP SoC and also some of
the fixes requried to get stable audio on X13s.
Tested SmartSpeakers and Headset on SM8450 MTP and
Lenovo Thinkpad X13s.
There are currently no users of this driver's platform data in the
mainline kernel, so let's drop it.
Newer devices should use DT, ACPI, or static software properties to
describe the hardware.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220920025804.1788667-1-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary dev_set_drvdata() in skl_remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220916140757.681414-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If clk_hw_register() fails, the corresponding clk should not be
unregistered.
To handle errors from loops, clean up partial iterations before doing the
goto. So add a clk_hw_unregister().
Then use a while (--i >= 0) loop in the unwind section.
Fixes: 78013a1cf2 ("ASoC: da7219: Fix clock handling around codec level probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/e4acceab57a0d9e477a8d5890a45c5309e553e7c.1663875789.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver uses two statically ininitialized struct dma_slave_config,
but only one of them is initialized to zero. Initialize config_be to
zero as well to make sure that no fields are filled with random values.
Let the compiler do this instead of explicitly calling memset() which
makes it easier to read.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663928147-10106-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 944c517b8c ("ASoC: fsl_audmix: make clock and
output src write only").
There is error after making clock and output src write only
$amixer -c imxaudmix cset numid=1 1
amixer: Cannot read the given element from control sysdefault:3
Which is worse than before, so let's revert the change.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1662446961-20799-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series includes fixes for suspend/resume and module
loading/unloading for the MTL platform.
Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>:
This series allows the headphone and headset mic jack status to be
handled separately by userspace on MT8192, MT8195 and MT8186.
Changes based on commit d0508b4f16 ("ASoC: rk3399_gru_sound: Add DAPM
pins, kcontrols for jack detection"). Found while searching for an
alternative for JackSwitch [1].
[1] https://lore.kernel.org/all/b98a8a77-7652-1995-27ba-eb7b6d30202a@gmail.com/
Nícolas F. R. A. Prado (6):
ASoC: mediatek: mt8192-mt6359: Expose individual headset jack pins
ASoC: mediatek: mt8195: Expose individual headset jack pins
ASoC: mediatek: mt8186-da7219: Add headset widgets with switches
ASoC: mediatek: mt8186-da7219: Expose individual headset jack pins
ASoC: mediatek: mt8186-rt5682: Add headset widgets with switches
ASoC: mediatek: mt8186-rt5682: Expose individual headset jack pins
.../mt8186/mt8186-mt6366-da7219-max98357.c | 25 +++++++++++++++++--
.../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 25 +++++++++++++++++--
.../mt8192/mt8192-mt6359-rt1015-rt5682.c | 17 +++++++++++--
sound/soc/mediatek/mt8195/mt8195-mt6359.c | 17 +++++++++++--
4 files changed, 76 insertions(+), 8 deletions(-)
--
2.37.3
It can help debugging IPC timeout issues (like we do with IPC3) if we
dump the IPC and DSP information.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware register dump is IPC3 specific, it is not available for other
IPC versions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
The existing code was printing registers relevant for IPC3, which is not
even supported on MTL.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS VA Macro now has soundwire master to deal with access to
analog mic in low power island use cases.
This is added after sc8280xp, add support for this.
Along with this also add compatibles for sm8450 and sc8280xp.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-13-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
WSA883x does support clock stop, so remove code that reset
the Codec during runtime pm suspend and add flag to mark
clock stop support.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
tx_macro_tx_mixer_put() and tx_macro_dec_mode_put() currently returns zero
eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
Fixes: d207bdea0c ("ASoC: codecs: lpass-tx-macro: add dapm widgets and route")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
currently active_decimator[] is unsigned long however we store negative
values when there is no decimator setup -1.
This is first bug, and the second bug is that we do not check if the decimator
is valid before writing to register using decimator as offset in
CDC_TXn_TX_PATH_CTL()
Fix these both by making active_decimator as integer array and adding check
in tx_macro_digital_mute() before accessing CDC_TXn_TX_PATH_CTL() register.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset soundwire block on frame sync generation clock reset.
Without this we are hitting read/write timeouts randomly during
runtime pm. Along with this remove a swr_reset redundant flag.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset soundwire block on frame sync generation clock reset.
Without this we are hitting read/write timeouts randomly during
runtime pm. Along with this remove a swr_reset redundant flag.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset soundwire block on frame sync generation clock reset.
Without this we are hitting read/write timeouts randomly during
runtime pm.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 3989ade2d1 ("ASoC: soc.h: remove num_cpus/codecs"), the
following build error occurs:
sound/soc/intel/boards/sof_da7219_max98373.c:198:27: error: no member named 'num_codecs' in 'struct snd_soc_pcm_runtime'
for (j = 0; j < runtime->num_codecs; j++) {
~~~~~~~ ^
1 error generated.
This conversion was missed by the aforementioned change. Do it now to
fix the build error.
Fixes: 3989ade2d1 ("ASoC: soc.h: remove num_cpus/codecs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922153752.336193-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The imx_pcm_dma_params_init_data() are no longer used since
commit c31da0b196 ("ASoC: imx-ssi: Remove unused driver"),
and the function is used to initialize some members of
"struct imx_dma_data", it's more readable to assign the value
directly, imx_pcm_dma_params_init_data is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220923090355.507648-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return val of snd_sof_dsp_read() right before polling the same
register is not used, so remove the redundant call.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the disabling of interrupts and powering down the DSP has been
abstracted, re-use the common ops for PM for MTL as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the IP-specific ops for disabling interrupts and powering down the
DSP in hda_suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable the IPC and SDW interrupts in the disable_interrupts op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable the IPC and SDW nterrupts in the disable_interrupts op for
cavs platforms.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequence for disabling DSP interrupts varies between different IP
versions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use power_down_dsp op to differentiate power down sequences in platforms.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For MTL platform, dsp cores need to go power down first then dsp subsystem
also need to set power down.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_power_down_dsp is set for power_down_dsp op for all HDA platforms.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP core power down sequences are different between cavs platforms and MTL.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8186-rt5682 driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DAPM widgets for headphones and headset microphone, with matching
switches, to allow toggling these paths based on the jack connection
status.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-6-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The da7219 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8186-da7219 driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-5-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DAPM widgets for headphones and headset microphone, with matching
switches, to allow toggling these paths based on the jack connection
status.
Note that differently from others (mt8192, mt8195 and mt8186-rt5682),
the widget here is named "Headphones" (with an 's'), since "Headphone
Switch" was already registered by da7219.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8195 ASoC driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-3-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8192-mt6359 driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-2-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: 20aedafdf4 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Per discussion on the alsa-devel mailing list [1], the legacy PIN to PCM
device mapping is obsolete nowadays. The maximum number of the simultaneously
usable PCM devices is equal to the HDMI codec converters.
Remove the extra PCM devices (beyond the detected converters) and force
the use of the dynamic PCM device allocation. The legacy code is removed.
I believe that all HDMI codecs have the jack sensing feature. Move the check
to the codec probe function and print a warning, if a codec without this
feature is detected.
[1] https://lore.kernel.org/alsa-devel/2f37e0b2-1e82-8c0b-2bbd-1e5038d6ecc6@perex.cz/
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220922084017.25925-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return the value dsp_allocate_ports() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220922112846.236987-1-ye.xingchen@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These two missed IDs need to be added for dynamic selection of drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922100014.27080-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few device specific fixes, nothing too large, and a new device
ID for a Dell laptop.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmMsRdEACgkQJNaLcl1U
h9Bd0gf/enmy6oEPGp20ZPEltavSm+rJLusK4bcjY31DiOniixeMEXIhr/NsdVji
o6F3mPJUeSAQBK0djCFDImPwDYxmBPrDEGnUqivguwTbdETh4iu+JPksO69pwf+b
nJMwl3AzRau3RiBgsPm5Ng85zy8RQ7Fd/Fftko1/eqm6ze2bvA5u4FWKgxOSjvq5
P2Lv9HRHICndSD1wNTa5IwaPgeS6E85sd4TVChQtVC5Vs/aXUl0rFAbBDlY2XsvC
a7/kTm4e/pvMXpQAoyZlk3zjAXRXnNTRGRNdte40YSByEs30gC8+g9mUBJBJgCCq
kQR2CgUGMUL6oanvPx9Ronqk268NEg==
=wfZR
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.0-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.0
A few device specific fixes, nothing too large, and a new device
ID for a Dell laptop.
Add IDs for RPL-M and RPL-PX
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922100254.27159-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just sort ADL PCI IDs by increasing order.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922100254.27159-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF CI tests report failures with the following error thrown
kernel: es8316 i2c-ESSX8336:00: Unable to sync registers 0x0-0x1. -121
ES8336 only supports I2C read/write one byte a time, so we do need to
set the .use_single_read and .use_single_write flags to avoid this
sync issue.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: FRED OH <fred.oh@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220922095912.27010-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
add pcm_pointer callback for mt8186 to support read
host position from DSP
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220921120239.31934-1-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocated ida needs to be freed up if the IPC message fails since
next time when we try again to set up the widget we are going to try to
allocate another ID and given enough tries, we are going to run out of
unique IDs.
Fixes: 711d0427c7 ("ASoC: SOF: ipc4-topology: move ida allocate/free to widget_setup/free")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220921112751.9253-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is useful for the debugging to print also the used HDA codec NIDs
used for the given HDMI device. With the dynamic converter assignment
the converter NID is changed dynamically.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220921093349.82680-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just fix compile error without any logic changes.
sound/soc/sunxi/sun50i-dmic.c:62:1: error: ‘static’ is not at beginning of declaration [-Werror=old-style-declaration]
62 | const static struct dmic_rate dmic_rate_s[] = {
| ^~~~~
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20220921033819.2188233-1-zengheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset was submitted earlier in April 2022 as part of the
"ASoC: SOF: add INTEL_IPC4 plumbing" series. As requested the SKL/KBL
support is moved to a different series.
This update adds minor style fixes and the ops that were missing at
the time. SKL and KBL daily tests have been running for several months
and helped identify missing sequences in the SOF driver for HDaudio
links, or platform differences that the driver did not account for
(number of pipelines, etc).
Note that this capability is not recommended for any distribution, it
is ONLY for SOF IPC4 CI tests on HDaudio devices, we will not extend
this SKL/KBL support for I2S devices based on ES8336 or Chromebooks
which are ONLY supported by the AVS driver.
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
This series consists of
1.Make ACP core code generic for newer SOC transition
2.Add support for Rembrandt plaform
3.Adding amd HS functionality to the sof core
4.increase SRAM inbox and outbox size to 1024
Merge series from Mario Limonciello <mario.limonciello@amd.com>:
Another model from ASUS and Lenovo have been identified that
don't include anything in ACPI tables to indicate they require the
ACP6x DMIC driver to be loaded.
This series adds them both to the quirk list.
After commit bfc5e8b860 ("ASoC: rt5682s: Reduce coupling of
Micbias and Vref2 settings"), the return of rt5682s_probe()
can be simplified. No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220920151413.3455255-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
2 patches from Rander required to enable mixing usages with multiple
pipelines.
Lenovo Yoga Slim 7 Pro X has an ACP DMIC that isn't specified in the
ASL or existing quirk list. Add it to the quirk table to let DMIC
work on these systems.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216299
Tested-by: Sebastian S <iam@decentr.al>
Reported-and-tested-by: Travis Glenn Hansen <travisghansen@yahoo.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220920201436.19734-3-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASUS Zenbook S 13 OLED (UM5302TA) needs this quirk to get the built-in
microphone working properly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216270
Signed-off-by: Xiaoyan Li <lxy.lixiaoyan@gmail.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220920201436.19734-2-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Increase inbox and outbox mailbox size from 512 to 1024 to
support thirdparty DTS integration ipc tx/rx messages communication.
This is done through firmware window get info.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-5-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add I2S HS control instance to the sof core.
This will help the amd topology to use the I2S HS Dai.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-4-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pci driver and platform driver to enable SOF support on ACP6x
architecture based Rembrandt platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-3-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Newer AMD SOC differs slightly in terms of few registers offset and
configuration. Add offsets into chip_info struct to make core ACP
code more generic and resusable on newer SOC.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-2-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We fixed the bug introduced by the patch for managing the shared
clocks at the commit 809f44a0cc ("ALSA: usb-audio: Clear fixed clock
rate at closing EP"), but it was merely a workaround. By this change,
the clock reference rate is cleared at each EP close, hence the still
remaining EP may need a re-setup of rate unnecessarily.
This patch introduces the proper refcounting for the clock reference
object so that the clock setup is done only when needed.
Fixes: 809f44a0cc ("ALSA: usb-audio: Clear fixed clock rate at closing EP")
Fixes: c11117b634 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Link: https://lore.kernel.org/r/20220920181126.4912-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a second attempt to fix the bug appearing on Android with the
recent kernel; the first try was ff878b408a and reverted at commit
79764ec772.
The details taken from the v1 patch:
One of the former changes for the endpoint management was the more
consistent setup of endpoints at hw_params.
snd_usb_endpoint_configure() is a single function that does the full
setup, and it's called from both PCM hw_params and prepare callbacks.
Although the EP setup at the prepare phase is usually skipped (by
checking need_setup flag), it may be still effective in some cases
like suspend/resume that requires the interface setup again.
As it's a full and single setup, the invocation of
snd_usb_endpoint_configure() includes not only the USB interface setup
but also the buffer release and allocation. OTOH, doing the buffer
release and re-allocation at PCM prepare phase is rather superfluous,
and better to be done only in the hw_params phase.
For those optimizations, this patch splits the endpoint setup to two
phases: snd_usb_endpoint_set_params() and snd_usb_endpoint_prepare(),
to be called from hw_params and from prepare, respectively.
Note that this patch changes the driver operation slightly,
effectively moving the USB interface setup again to PCM prepare stage
instead of hw_params stage, while the buffer allocation and such
initializations are still done at hw_params stage.
And, the change of the USB interface setup timing (moving to prepare)
gave an interesting "fix", too: it was reported that the recent
kernels caused silent output at the beginning on playbacks on some
devices on Android, and this change casually fixed the regression.
It seems that those devices are picky about the sample rate change (or
the interface change?), and don't follow the too immediate rate
changes.
Meanwhile, Android operates the PCM in the following order:
- open, then hw_params with the possibly highest sample rate
- close without prepare
- re-open, hw_params with the normal sample rate
- prepare, and start streaming
This procedure ended up the hw_params twice with different rates, and
because the recent kernel did set up the sample rate twice one and
after, it screwed up the device. OTOH, the earlier kernels didn't set
up the USB interface at hw_params, hence this problem didn't appear.
Now, with this patch, the USB interface setup is again back to the
prepare phase, and it works around the problem automagically.
Although we should address the sample rate problem in a more solid
way in future, let's keep things working as before for now.
***
What's new in the take#2 patch:
- The regression caused by the v1 patch (bko#216500) was due to the
missing check of need_setup flag at hw_params. Now the check is
added, and the snd_usb_endpoint_set_params() call is skipped when
the running EP is re-opened.
- There was another bug in v1 where the clock reference rate wasn't
updated at hw_params phase, which may lead to a lack of the proper
hw constraints when an application doesn't issue the prepare but
only the hw_params call. This patch fixes it as well by tracking
the clock rate change in the prepare callback with a new flag
"need_update" for the clock reference object, just like others.
- The configure_endpoints() are simplified and folded back into
snd_usb_pcm_prepare().
Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Fixes: ff878b408a ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare")
Reported-by: chihhao chen <chihhao.chen@mediatek.com>
Link: https://lore.kernel.org/r/87e6d6ae69d68dc588ac9acc8c0f24d6188375c3.camel@mediatek.com
Link: https://lore.kernel.org/r/20220901124136.4984-1-tiwai@suse.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216500
Link: https://lore.kernel.org/r/20220920181106.4894-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cppcheck warning:
sound/soc/sof/ipc4-topology.c:1533:12: style: Variable 'pipeline' is
assigned a value that is never used. [unreadVariable]
pipeline = pipe_widget->private;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220920145405.2089147-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If multiple pipeline are mixed into one, we can't unprepare
the widget used by other pipelines. This patch checks use_count
to address this case.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920150107.2090695-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Playback can't work after the first try sometimes. The reason is that
some widgets don't have ipc_unprepare ops and driver will jump
to sink_prepare so miss to set prepare state to false. Next
time these widgets will not be prepared and it will result to
error with different format of audio file since the last setting
is not applicable.
This patch makes sure that widget prepare state will be cleared
to false when it is unprepared.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920150107.2090695-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ops and ops_init for SKL and KBL.
Tested on Dell XPS-13-9350 and KBL NUC.
Note: currently only SOF_IPC4_MTRACE_INTEL_CAVS_2 type is supported by
the ipc4-mtrace driver, which is used by CAVS 2.x platforms (ICL, TGL,
ADL) and ACE (MTL).
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation of the IPCv4 IPC support, this patch adds
support for SkyLake and KabyLake boot and descriptors
used when probing the PCI driver.
The work was initially contributed in 2018 by Liam Girdwood and Zhu
Yingjiang, and abandoned due to firmware signature issues. With the
upcoming support of IPC v4, and hence the Intel closed-source
firmware, it's time to re-add this capability.
The SKL ops will be added in the next patch.
Tested with the IPC4 and closed-source firmware on Dell XPS 9350
and KBL NUC with HDaudio codecs. The SSP and DMIC interfaces are not
supported at this time.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the SkyLake and KabyLake code loader on
top of the SOF IPC4.
The work was initially contributed in 2018 by Liam Girdwood and Zhu
Yingjiang, and abandoned due to firmware signature issues. With the
existing support of IPC v4, it's time to re-add this capability.
This patch uses the newly added FSR (Firmware State Register)
definitions for DSP state handling and targeting, ass well as new
state definition for SKL which indicates that the firmware has been
started (similar to FW_ENTERED on other platforms).
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation of the IPCv4 IPC support, this patch adds exposes
two functions required by the SKL/KBL boot and code loader.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 32eeeed963.
As the fix for endpoint configuration split is reverted at next, do
another revert here for a clean patch application.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit ff878b408a.
Unfortunately the recent fix seems bringing another regressions with
PulseAudio / pipewire, at least for Steinberg and MOTU devices.
As a temporary solution, do a straight revert. The issue for Android
will be revisited again later by another different fix (if any).
Fixes: ff878b408a ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216500
Link: https://lore.kernel.org/r/20220920113929.25162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return the value inb() directly instead of storing it in another redundant
variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220920064605.215318-1-ye.xingchen@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Martin Povišer <povik+lin@cutebit.org>:
there's a CS42L83 headphone jack codec found in Apple computers (in the
recent 'Apple Silicon' ones as well as in earlier models, one example
[1]). The part isn't publicly documented, but it appears almost
identical to CS42L42, for which we have a driver in kernel. This series
adapts the CS42L42 driver to the new part, and makes one change in
anticipation of a machine driver for the Apple computers.
Patch 1 adds new compatible to the cs42l42 schema.
Patches 2 to 7 are taken from Richard's recent series [2] adding
soundwire support to cs42l42. They are useful refactorings to build on
in the later patches, and also this way our work doesn't diverge.
(I fixed missing free_irq path in cs42l42_init, did
s/Soundwire/SoundWire/ in changelogs, rebased.)
Patch 8 exports some regmap-related symbols from cs42l42.c so they can
be used to create cs42l83 regmap in cs42l83-i2c.c later.
Patch 9 is the cs42l83 support proper.
Patch 10 implements 'set_bclk_ratio' on the cs42l42 core. This will be
called by the upcoming ASoC machine driver for 'Apple Silicon' Macs.
(We have touched on this change to be made in earlier discussion, see
[3] and replies.)
Patch 11 brings cs42l42-i2c.c in sync with cs42l83-i2c.c on
dev_err_probe() usage.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset solves a known issue with ES8336 platforms wrt MCLK
selection. Most of the devices use the MCLK0 signal, but some devices
do use the MCLK1 signal.
The MCLK is defined in the topology, it would be a nightmare to
generate more topology files just for one MCLK difference. With a
minor extension to the intel-nhlt library, the MCLK information can be
found by parsing the NHLT table, and we can override the mclk_id at
boot time.
The only known issues for this platform remain the detection of GPIO
and microphone connections, currently only possible with manual
quirks.
Thanks to Eugene J. Markow for testing this patchset.
