xt_compat_match/target_from_user doesn't check that zeroing the area
to start of next rule won't write past end of allocated ruleset blob.
Remove this code and zero the entire blob beforehand.
Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com
Reported-by: Andy Nguyen <theflow@google.com>
Fixes: 9fa492cdc1 ("[NETFILTER]: x_tables: simplify compat API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add missing 't' in attrtype.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit fee2d54641 ("net: phy: marvell: mv88e6390 temperature
sensor reading"), Linux reports the temperature of Topaz hwmon as
constant -75°C.
This is because switches from the Topaz family (88E6141 / 88E6341) have
the address of the temperature sensor register different from Peridot.
This address is instead compatible with 88E1510 PHYs, as was used for
Topaz before the above mentioned commit.
Create a new mapping table between switch family and PHY ID for families
which don't have a model number. And define PHY IDs for Topaz and Peridot
families.
Create a new PHY ID and a new PHY driver for Topaz's internal PHY.
The only difference from Peridot's PHY driver is the HWMON probing
method.
Prior this change Topaz's internal PHY is detected by kernel as:
PHY [...] driver [Marvell 88E6390] (irq=63)
And afterwards as:
PHY [...] driver [Marvell 88E6341 Family] (irq=63)
Signed-off-by: Pali Rohár <pali@kernel.org>
BugLink: https://github.com/globalscaletechnologies/linux/issues/1
Fixes: fee2d54641 ("net: phy: marvell: mv88e6390 temperature sensor reading")
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
A pre-release silicon erratum workaround where wq reset does not clear
WQCFG registers was leaked into upstream code. Use wq reset command
instead of blasting the MMIO region. This also address an issue where
we clobber registers in future devices.
Fixes: da32b28c95 ("dmaengine: idxd: cleanup workqueue config after disabling")
Reported-by: Shreenivaas Devarajan <shreenivaas.devarajan@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add disabling/clearing of MSIX permission entries on device shutdown to
mirror the enabling of the MSIX entries on probe. Current code left the
MSIX enabled and the pasid entries still programmed at device shutdown.
Fixes: 8e50d39265 ("dmaengine: idxd: Add shared workqueue support")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824457969.882533.6020239898682672311.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
. fix pfn offset (stops booting on some platforms)
-----BEGIN PGP SIGNATURE-----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=UoDX
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-for-v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"Some m68k platforms with a non-zero memory base fail to boot with the
recent flatmem changes.
This is a single regression fix to the pfn offset for that case"
* tag 'm68knommu-for-v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: fix flatmem memory model setup
The entry from EL0 code checks the TFSRE0_EL1 register for any
asynchronous tag check faults in user space and sets the
TIF_MTE_ASYNC_FAULT flag. This is not done atomically, potentially
racing with another CPU calling set_tsk_thread_flag().
Replace the non-atomic ORR+STR with an STSET instruction. While STSET
requires ARMv8.1 and an assembler that understands LSE atomics, the MTE
feature is part of ARMv8.5 and already requires an updated assembler.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 637ec831ea ("arm64: mte: Handle synchronous and asynchronous tag check faults")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Will Deacon <will@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210409173710.18582-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
After the recently added commit fe0f1e3bfd ("drm/i915: Shut down
displays gracefully on reboot"), the DSI panel on a Cherry Trail based
Predia Basic tablet would no longer properly light up after reboot.
I've managed to reproduce this without rebooting by doing:
chvt 3; echo 1 > /sys/class/graphics/fb0/blank;\
echo 0 > /sys/class/graphics/fb0/blank
Which rapidly turns the panel off and back on again.
The vlv_dsi.c code uses an intel_dsi_msleep() helper for the various delays
used for panel on/off, since starting with MIPI-sequences version >= 3 the
delays are already included inside the MIPI-sequences.
The problems exposed by the "Shut down displays gracefully on reboot"
change, show that using this helper for the panel_pwr_cycle_delay is
not the right thing to do. This has not been noticed until now because
normally the panel never is cycled off and directly on again in quick
succession.
Change the msleep for the panel_pwr_cycle_delay to a normal msleep()
call to avoid the panel staying black after a quick off + on cycle.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: fe0f1e3bfd ("drm/i915: Shut down displays gracefully on reboot")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325114823.44922-1-hdegoede@redhat.com
(cherry picked from commit 2878b29fc2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Don't zero out the watermarks for the Y plane since we've already
computed them when computing the UV plane's watermarks (since the
UV plane always appears before ethe Y plane when iterating through
the planes).
This leads to allocating no DDB for the Y plane since .min_ddb_alloc
also gets zeroed. And that of course leads to underruns when scanning
out planar formats.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: dbf71381d7 ("drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm code")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327005945.4929-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit f99b805fb9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks like that there actually are another subset of laptops on the market
that don't support the Intel HDR backlight interface, but do advertise
support for the VESA DPCD backlight interface despite the fact it doesn't
seem to work.
Note though I'm not entirely clear on this - on one of the machines where
this issue was observed, I also noticed that we appeared to be rejecting
the VBT defined backlight frequency in
intel_dp_aux_vesa_calc_max_backlight(). It's noted in this function that:
/* Use highest possible value of Pn for more granularity of brightness
* adjustment while satifying the conditions below.
* ...
* - FxP is within 25% of desired value.
* Note: 25% is arbitrary value and may need some tweak.
*/
So it's possible that this value might just need to be tweaked, but for now
let's just disable the VESA backlight interface unless it's specified in
the VBT just to be safe. We might be able to try enabling this again by
default in the future.
Fixes: 2227816e64 ("drm/i915/dp: Allow forcing specific interfaces through enable_dpcd_backlight")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/3169
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318170204.513000-1-lyude@redhat.com
(cherry picked from commit 9e2eb6d538)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently psw_idle does not allocate a stack frame and does not
save its r14 and r15 into the save area. Even though this is valid from
call ABI point of view, because psw_idle does not make any calls
explicitly, in reality psw_idle is an entry point for controlled
transition into serving interrupts. So, in practice, psw_idle stack
frame is analyzed during stack unwinding. Depending on build options
that r14 slot in the save area of psw_idle might either contain a value
saved by previous sibling call or complete garbage.
[task 0000038000003c28] do_ext_irq+0xd6/0x160
[task 0000038000003c78] ext_int_handler+0xba/0xe8
[task *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs
([task 0000038000003dd8] 0x0)
[task 0000038000003e10] default_idle_call+0x42/0x148
[task 0000038000003e30] do_idle+0xce/0x160
[task 0000038000003e70] cpu_startup_entry+0x36/0x40
[task 0000038000003ea0] arch_call_rest_init+0x76/0x80
So, to make a stacktrace nicer and actually point for the real caller of
psw_idle in this frequently occurring case, make psw_idle save its r14.
[task 0000038000003c28] do_ext_irq+0xd6/0x160
[task 0000038000003c78] ext_int_handler+0xba/0xe8
[task *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs
([task 0000038000003dd8] arch_cpu_idle+0x3c/0xd0)
[task 0000038000003e10] default_idle_call+0x42/0x148
[task 0000038000003e30] do_idle+0xce/0x160
[task 0000038000003e70] cpu_startup_entry+0x36/0x40
[task 0000038000003ea0] arch_call_rest_init+0x76/0x80
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently when interrupt arrives to cpu while in kernel context
INT_HANDLER macro (used for ext_int_handler and io_int_handler)
allocates new stack frame and pt_regs on the kernel stack and
sets up the backchain to jump over the pt_regs to the frame which has
been interrupted. This is not ideal to two reasons:
1. This hides the fact that kernel stack contains interrupt frame in it
and hence breaks arch_stack_walk_reliable(), which needs to know that to
guarantee "reliability" and checks that there are no pt_regs on the way.
2. It breaks the backchain unwinder logic, which assumes that the next
stack frame after an interrupt frame is reliable, while it is not.
In some cases (when r14 contains garbage) this leads to early unwinding
termination with an error, instead of marking frame as unreliable
and continuing.
To address that, only set backchain to 0.
Fixes: 56e62a7370 ("s390: convert to generic entry")
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210409082805.23643-1-dinghao.liu@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the first list_for_each_entry() macro of dma_async_device_register,
it gets the chan from list and calls __dma_async_device_channel_register
(..,chan). We can see that chan->local is allocated by alloc_percpu() and
it is freed chan->local by free_percpu(chan->local) when
__dma_async_device_channel_register() failed.
But after __dma_async_device_channel_register() failed, the caller will
goto err_out and freed the chan->local in the second time by free_percpu().
The cause of this problem is forget to set chan->local to NULL when
chan->local was freed in __dma_async_device_channel_register(). My
patch sets chan->local to NULL when the callee failed to avoid double free.
Fixes: d2fb0a0438 ("dmaengine: break out channel registration")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210331014458.3944-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some architectures do not provide devm_*() APIs. Hence make the driver
dependent on HAVE_IOMEM.
Fixes: dbde5c2934 ("dw_dmac: use devm_* functions to simplify code")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210324141757.24710-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
WQ size can only be changed when the device is disabled. Current code
allows change when device is enabled but wq is disabled. Change the check
to detect device state.
Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The operation capability register is 256bits. The current output only
prints out the first 64bits. Fix to output the entire 256bits. The current
code omits operation caps from IAX devices.
Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Current code blindly writes over the SWERR and the OVERFLOW bits. Write
back the bits actually read instead so the driver avoids clobbering the
OVERFLOW bit that comes after the register is read.
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161352082229.3511254.1002151220537623503.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure
is large enough to include IPv4 or IPv6 header, and reject if not. The
geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet.
Fixes a KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+2e406a9ac75bb71d4b7a@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the probe fails, we must disable the regulator that was previously
enabled.
This patch is a follow-up to commit ac88c531a5
("net: davicom: Fix regulator not turned off on failed probe") which missed
one case.
Fixes: 7994fe55a4 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update maintainer entry for freescale fec driver.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Detected a broken boot on mcf54415, likely introduced from
commit 4bfc848e09
("m68k/mm: enable use of generic memory_model.h for !DISCONTIGMEM")
Fix ARCH_PFN_OFFSET to be a pfn.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
-----BEGIN PGP SIGNATURE-----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=MuRt
-----END PGP SIGNATURE-----
Merge tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more patch that we'd like to get to 5.12 before release.
It's changing where and how the superblock is stored in the zoned
mode. It is an on-disk format change but so far there are no
implications for users as the proper mkfs support hasn't been merged
and is waiting for the kernel side to settle.
Until now, the superblocks were derived from the zone index, but zone
size can differ per device. This is changed to be based on fixed
offset values, to make it independent of the device zone size.
The work on that got a bit delayed, we discussed the exact locations
to support potential device sizes and usecases. (Partially delayed
also due to my vacation.) Having that in the same release where the
zoned mode is declared usable is highly desired, there are userspace
projects that need to be updated to recognize the feature. Pushing
that to the next release would make things harder to test"
* tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: move superblock logging zone location
ambiguous/confusing kernel log message.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=y7/k
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixlets from Ingo Molnar:
"Two minor fixes: one for a Clang warning, the other improves an
ambiguous/confusing kernel log message"
* tag 'locking-urgent-2021-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Address clang -Wformat warning printing for %hd
lockdep: Add a missing initialization hint to the "INFO: Trying to register non-static key" message
again.
- A fix for the CE collector to return the proper return values to its
callers which are used to convey what the collector has done with the
error address.
-----BEGIN PGP SIGNATURE-----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=aV+H
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the vDSO exception handling return path to disable interrupts
again.
- A fix for the CE collector to return the proper return values to its
callers which are used to convey what the collector has done with the
error address.
* tag 'x86_urgent_for_v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Correct exc_general_protection() and math_error() return paths
RAS/CEC: Correct ce_add_elem()'s returned values
Pull percpu fix from Dennis Zhou:
"This contains a fix for sporadically failing atomic percpu
allocations.
I only caught it recently while I was reviewing a new series [1] and
simultaneously saw reports by btrfs in xfstests [2] and [3].
In v5.9, memcg accounting was extended to percpu done by adding a
second type of chunk. I missed an interaction with the free page float
count used to ensure we can support atomic allocations. If one type of
chunk has no free pages, but the other has enough to satisfy the free
page float requirement, we will not repopulate the free pages for the
former type of chunk. This led to the sporadically failing atomic
allocations"
Link: https://lore.kernel.org/linux-mm/20210324190626.564297-1-guro@fb.com/ [1]
Link: https://lore.kernel.org/linux-mm/20210401185158.3275.409509F4@e16-tech.com/ [2]
Link: https://lore.kernel.org/linux-mm/CAL3q7H5RNBjCi708GH7jnczAOe0BLnacT9C+OBgA-Dx9jhB6SQ@mail.gmail.com/ [3]
* 'for-5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: make pcpu_nr_empty_pop_pages per chunk type
Seven fixes all in drivers. The hpsa three are the most extensive and
the most problematic: it's a packed structure misalignment that oopses
on ia64 but looks like it would also oops on quite a few non-x86
architectures. The pm80xx is a regression and the rest are bug fixes
for patches in the misc tree.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYHHkmSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishY4jAQCkSkE5
KBpRtx/62/7CxiUDzY5O0+XPHPzz8E/fuvQ0VwD9GC9C68M7Brij+JJYLV6OofcY
weRtt2h6JSJ+1ncWdno=
=ys05
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes, all in drivers.
The hpsa three are the most extensive and the most problematic: it's a
packed structure misalignment that oopses on ia64 but looks like it
would also oops on quite a few non-x86 architectures.
The pm80xx is a regression and the rest are bug fixes for patches in
the misc tree"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state
scsi: target: iscsi: Fix zero tag inside a trace event
scsi: pm80xx: Fix chip initialization failure
scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs
scsi: ufs: core: Fix task management request completion timeout
scsi: hpsa: Add an assert to prevent __packed reintroduction
scsi: hpsa: Fix boot on ia64 (atomic_t alignment)
scsi: hpsa: Use __packed on individual structs, not header-wide
Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.
Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.
The per-net hook unregister function uses call_rcu instead.
Fixes: b9e69e1273 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.
Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.
Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().
Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.
This can only happens on module removal, not during netns exit.
The new function expects the table name, not the table struct.
This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.
The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.
Fixes: aee12a0a37 ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix an oops triggered by ptrace when CONFIG_PPC_FPU_REGS=n.
Fix an oops on sigreturn when the VDSO is unmapped on 32-bit.
Fix vdso_wrapper.o not being rebuilt everytime vdso.so is rebuilt.
Thanks to Christophe Leroy.
-----BEGIN PGP SIGNATURE-----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=gIsc
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some some more powerpc fixes for 5.12:
- Fix an oops triggered by ptrace when CONFIG_PPC_FPU_REGS=n
- Fix an oops on sigreturn when the VDSO is unmapped on 32-bit
- Fix vdso_wrapper.o not being rebuilt everytime vdso.so is rebuilt
Thanks to Christophe Leroy"
* tag 'powerpc-5.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: Make sure vdso_wrapper.o is rebuilt everytime vdso.so is rebuilt
powerpc/signal32: Fix Oops on sigreturn with unmapped VDSO
powerpc/ptrace: Don't return error when getting/setting FP regs without CONFIG_PPC_FPU_REGS
Here is a single driver core fix for 5.12-rc7 to resolve a reported
problem that caused some devices to lockup when booting. It has been in
linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYHGihQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yki5wCfV6muXNlv6rawPeEwzfht6zrXrwYAoMOFRAu9
8UvfWwATJf32xphrHZDy
=RAWf
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for 5.12-rc7 to resolve a reported
problem that caused some devices to lockup when booting. It has been
in linux-next with no reported issues"
* tag 'driver-core-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix locking bug in deferred_probe_timeout_work_func()
Here are a few small USB and Thunderbolt driver fixes for 5.12-rc7 for
reported issues:
- thunderbolt leaks and off-by-one fix
- cdnsp deque fix
- usbip fixes for syzbot-reported issues.
all have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYHGiGA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSDgCfa1jQ40rNFkf749XtvgbYGmjCfSwAoKPc4A7N
2Fc6WE1+fDR1l9JfERJ7
=qk3Z
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a few small USB and Thunderbolt driver fixes for 5.12-rc7 for
reported issues:
- thunderbolt leaks and off-by-one fix
- cdnsp deque fix
- usbip fixes for syzbot-reported issues
All have been in linux-next with no reported problems"
* tag 'usb-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usbip: synchronize event handler with sysfs code paths
usbip: vudc synchronize sysfs code paths
usbip: stub-dev synchronize sysfs code paths
usbip: add sysfs_lock to synchronize sysfs code paths
thunderbolt: Fix off by one in tb_port_find_retimer()
thunderbolt: Fix a leak in tb_retimer_add()
usb: cdnsp: Fixes issue with dequeuing requests after disabling endpoint
Pull i2c fixes from Wolfram Sang:
"A mixture of driver and documentation bugfixes for I2C"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: mention Oleksij as maintainer of the binding docs
i2c: exynos5: correct top kerneldoc
i2c: designware: Adjust bus_freq_hz when refuse high speed mode set
i2c: hix5hd2: use the correct HiSilicon copyright
i2c: gpio: update email address in binding docs
i2c: imx: drop me as maintainer of binding docs
i2c: stm32f4: Mundane typo fix
I2C: JZ4780: Fix bug for Ingenic X1000.
i2c: turn recovery error on init to debug
Moves the location of the superblock logging zones. The new locations of
the logging zones are now determined based on fixed block addresses
instead of on fixed zone numbers.
The old placement method based on fixed zone numbers causes problems when
one needs to inspect a file system image without access to the drive zone
information. In such case, the super block locations cannot be reliably
determined as the zone size is unknown. By locating the superblock logging
zones using fixed addresses, we can scan a dumped file system image without
the zone information since a super block copy will always be present at or
after the fixed known locations.
Introduce the following three pairs of zones containing fixed offset
locations, regardless of the device zone size.
- primary superblock: offset 0B (and the following zone)
- first copy: offset 512G (and the following zone)
- Second copy: offset 4T (4096G, and the following zone)
If a logging zone is outside of the disk capacity, we do not record the
superblock copy.
The first copy position is much larger than for a non-zoned filesystem,
which is at 64M. This is to avoid overlapping with the log zones for
the primary superblock. This higher location is arbitrary but allows
supporting devices with very large zone sizes, plus some space around in
between.
Such large zone size is unrealistic and very unlikely to ever be seen in
real devices. Currently, SMR disks have a zone size of 256MB, and we are
expecting ZNS drives to be in the 1-4GB range, so this limit gives us
room to breathe. For now, we only allow zone sizes up to 8GB. The
maximum zone size that would still fit in the space is 256G.
The fixed location addresses are somewhat arbitrary, with the intent of
maintaining superblock reliability for smaller and larger devices, with
the preference for the latter. For this reason, there are two superblocks
under the first 1T. This should cover use cases for physical devices and
for emulated/device-mapper devices.
The superblock logging zones are reserved for superblock logging and
never used for data or metadata blocks. Note that we only reserve the
two zones per primary/copy actually used for superblock logging. We do
not reserve the ranges of zones possibly containing superblocks with the
largest supported zone size (0-16GB, 512G-528GB, 4096G-4112G).
The zones containing the fixed location offsets used to store
superblocks on a non-zoned volume are also reserved to avoid confusion.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In case a platform doesn't provide explicit flush-hints but provides an
explicit flush callback via ND_REGION_ASYNC region flag, then
nvdimm_has_flush() still returns '0' indicating that writes do not
require flushing. This happens on PPC64 with patch at [1] applied, where
'deep_flush' of a region was denied even though an explicit flush
function was provided.
Fix this by adding a condition to nvdimm_has_flush() to test for the
ND_REGION_ASYNC flag on the region and see if a 'region->flush' callback
is assigned.
Link: http://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87 [1]
Fixes: c5d4355d10 ("libnvdimm: nd_region flush callback support")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Link: https://lore.kernel.org/r/20210402092555.208590-1-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
release.
- Two clk framework fixes for a long standing issue in
clk_notifier_{register,unregister}() where we used a
pointer that was for a struct containing a list head
when there was no container struct
- A compile warning fix for socfpga that's good to have
- A double free problem with devm registered fixed factor clks
- One last fix to the Qualcomm camera clk driver to use the
right clk ops so clks don't get stuck and stop working
because the firmware takes them for a ride.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmBxArIRHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSUKHhAAwlYpfIY69a8LJIwRvqRkgrdRL7xZ4L/4
K7fB2bPMt+C8BD/hoPURGPRtg3CYJySYf7aQ9JsknmA7+ZXU+EawOsYylhjsYED5
pfjdsbGGZJGXZyXXSfmspg5IrRGIE7B0vwMOsG58zp60lCpuKbVsjVr3OsEBb797
eFf2mim+AIzh9G2/HUk//KJjLCFDbP6tdi3L3nQ8XKOjEC46nKDN4jSNFldYckvC
NRRxiUR2q5Jvf4mK0H1pekBT4t/KuWpAupeW85Y4aLSiP2v+PE9zW8WqWszB5b1O
Ln/8FTMvANnqiRufkpOqUbp+gMuNx/0MqipE6GpoLzIpg1vGsAYHxASNOIA/7RLX
LnDytcZHjHtJ5xmbw/wDCIus6a80yeQYCMY30nvA+vEd8f6PSt1WV2ISG9HQVmeh
+1jOBfMDeK6dYIwcU/d2/aMoNT8V625OisWrfNCIpoaRXo1g9340qn03mpw24VlZ
6r2/roVK8jdGnrNft4z5hnLeq5kcjuzxGyzjJTnBIqC5v7ZT+HUOh6raNSQJyIes
7BdndOinZr0To/WQZ4p2yLfUrCXUxqy88nYukJUC49Iu4Ai6VhTA+Bdg3vEI4w9l
yz6RbuccIgLR1goLVTFVE00hgz42iMgz0QqzWkZfMDEr8WuJCPQD0WVJ4CdlWor1
+Ya2VYFP1AE=
=YRHd
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here's the latest pile of clk driver and clk framework fixes for this
release:
- Two clk framework fixes for a long standing issue in
clk_notifier_{register,unregister}() where we used a pointer that
was for a struct containing a list head when there was no container
struct
- A compile warning fix for socfpga that's good to have
- A double free problem with devm registered fixed factor clks
- One last fix to the Qualcomm camera clk driver to use the right clk
ops so clks don't get stuck and stop working because the firmware
takes them for a ride"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fixed: fix double free in resource managed fixed-factor clock
clk: fix invalid usage of list cursor in unregister
clk: fix invalid usage of list cursor in register
clk: qcom: camcc: Update the clock ops for the SC7180
clk: socfpga: fix iomem pointer cast on 64-bit
Merge misc fixes from Andrew Morton:
"14 patches.
Subsystems affected by this patch series: mm (kasan, gup, pagecache,
and kfence), MAINTAINERS, mailmap, nds32, gcov, ocfs2, ia64, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS
kfence, x86: fix preemptible warning on KPTI-enabled systems
lib/test_kasan_module.c: suppress unused var warning
kasan: fix conflict with page poisoning
fs: direct-io: fix missing sdio->boundary
ia64: fix user_stack_pointer() for ptrace()
ocfs2: fix deadlock between setattr and dio_end_io_write
gcov: re-fix clang-11+ support
nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff
mm/gup: check page posion status for coredump.
.mailmap: fix old email addresses
mailmap: update email address for Jordan Crouse
treewide: change my e-mail address, fix my name
MAINTAINERS: update CZ.NIC's Turris information
mac80211, wireless, and bpf trees. No scary regressions here
or in the works, but small fixes for 5.12 changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params
from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding
the rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related
tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool
memory model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SHL0
-----END PGP SIGNATURE-----
Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees.
No scary regressions here or in the works, but small fixes for 5.12
changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt"
* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
net: fix hangup on napi_disable for threaded napi
net: hns3: Trivial spell fix in hns3 driver
lan743x: fix ethernet frame cutoff issue
net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
net: dsa: lantiq_gswip: Don't use PHY auto polling
net: sched: sch_teql: fix null-pointer dereference
ipv6: report errors for iftoken via netlink extack
net: sched: fix err handler in tcf_action_init()
net: sched: fix action overwrite reference counting
Revert "net: sched: bump refcount for new action in ACT replace mode"
ice: fix memory leak of aRFS after resuming from suspend
i40e: Fix sparse warning: missing error code 'err'
i40e: Fix sparse error: 'vsi->netdev' could be null
i40e: Fix sparse error: uninitialized symbol 'ring'
i40e: Fix sparse errors in i40e_txrx.c
i40e: Fix parameters in aq_get_phy_register()
nl80211: fix beacon head validation
bpf, x86: Validate computation of branch displacements for x86-32
bpf, x86: Validate computation of branch displacements for x86-64
...
-----BEGIN PGP SIGNATURE-----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=EbJ/
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two minor fixups for the reissue logic, and one for making sure that
unbounded work is canceled on io-wq exit"
* tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block:
io-wq: cancel unbounded works on io-wq destroy
io_uring: fix rw req completion
io_uring: clear F_REISSUE right after getting it
When LATENCYTOP, LOCKDEP, or FAULT_INJECTION_STACKTRACE_FILTER is
enabled and ARCH_WANT_FRAME_POINTERS is disabled, Kbuild gives a warning
such as:
WARNING: unmet direct dependencies detected for FRAME_POINTER
Depends on [n]: DEBUG_KERNEL [=y] && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS [=n] || MCOUNT [=n]
Selected by [y]:
- LATENCYTOP [=y] && DEBUG_KERNEL [=y] && STACKTRACE_SUPPORT [=y] && PROC_FS [=y] && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM && !ARC && !X86
Depending on ARCH_WANT_FRAME_POINTERS causes a recursive dependency
error. ARCH_WANT_FRAME_POINTERS is to be selected by the architecture,
and is not supposed to be overridden by other config options.
Link: https://lkml.kernel.org/r/20210329165329.27994-1-julianbraha@gmail.com
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On systems with KPTI enabled, we can currently observe the following
warning:
BUG: using smp_processor_id() in preemptible
caller is invalidate_user_asid+0x13/0x50
CPU: 6 PID: 1075 Comm: dmesg Not tainted 5.12.0-rc4-gda4a2b1a5479-kfence_1+ #1
Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012
Call Trace:
dump_stack+0x7f/0xad
check_preemption_disabled+0xc8/0xd0
invalidate_user_asid+0x13/0x50
flush_tlb_one_kernel+0x5/0x20
kfence_protect+0x56/0x80
...
While it normally makes sense to require preemption to be off, so that
the expected CPU's TLB is flushed and not another, in our case it really
is best-effort (see comments in kfence_protect_page()).
Avoid the warning by disabling preemption around flush_tlb_one_kernel().
Link: https://lore.kernel.org/lkml/YGIDBAboELGgMgXy@elver.google.com/
Link: https://lkml.kernel.org/r/20210330065737.652669-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Local `unused' is intentionally unused - it is there to suppress
__must_check warnings.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/202104050216.HflRxfJm-lkp@intel.com
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When page poisoning is enabled, it accesses memory that is marked as
poisoned by KASAN, which leas to false-positive KASAN reports.
Suppress the reports by adding KASAN annotations to unpoison_page()
(poison_page() already has them).
Link: https://lkml.kernel.org/r/2dc799014d31ac13fd97bd906bad33e16376fc67.1617118501.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I encountered a hung task issue, but not a performance one. I run DIO
on a device (need lba continuous, for example open channel ssd), maybe
hungtask in below case:
DIO: Checkpoint:
get addr A(at boundary), merge into BIO,
no submit because boundary missing
flush dirty data(get addr A+1), wait IO(A+1)
writeback timeout, because DIO(A) didn't submit
get addr A+2 fail, because checkpoint is doing
dio_send_cur_page() may clear sdio->boundary, so prevent it from missing
a boundary.
Link: https://lkml.kernel.org/r/20210322042253.38312-1-jack.qiu@huawei.com
Fixes: b1058b9812 ("direct-io: submit bio after boundary buffer is added to it")
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
