Use READ_ONCE() to tell the compiler to not optimse away the read of
xprt->xpt_flags in svc_xprt_release_slot().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Two and a half years ago, the client was changed to use gathered
Send for larger inline messages, in commit 655fec6987 ("xprtrdma:
Use gathered Send for large inline messages"). Several fixes were
required because there are a few in-kernel device drivers whose
max_sge is 3, and these were broken by the change.
Apparently my memory is going, because some time later, I submitted
commit 25fd86eca1 ("svcrdma: Don't overrun the SGE array in
svc_rdma_send_ctxt"), and after that, commit f3c1fd0ee2 ("svcrdma:
Reduce max_send_sges"). These too incorrectly assumed in-kernel
device drivers would have more than a few Send SGEs available.
The fix for the server side is not the same. This is because the
fundamental problem on the server is that, whether or not the client
has provisioned a chunk for the RPC reply, the server must squeeze
even the most complex RPC replies into a single RDMA Send. Failing
in the send path because of Send SGE exhaustion should never be an
option.
Therefore, instead of failing when the send path runs out of SGEs,
switch to using a bounce buffer mechanism to handle RPC replies that
are too complex for the device to send directly. That allows us to
remove the max_sge check to enable drivers with small max_sge to
work again.
Reported-by: Don Dutile <ddutile@redhat.com>
Fixes: 25fd86eca1 ("svcrdma: Don't overrun the SGE array in ...")
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When using Kerberos with v4.20, I've observed frequent connection
loss on heavy workloads. I traced it down to the client underrunning
the GSS sequence number window -- NFS servers are required to drop
the RPC with the low sequence number, and also drop the connection
to signal that an RPC was dropped.
Bisected to commit 918f3c1fe8 ("SUNRPC: Improve latency for
interactive tasks").
I've got a one-line workaround for this issue, which is easy to
backport to v4.20 while a more permanent solution is being derived.
Essentially, tk_owner-based sorting is disabled for RPCs that carry
a GSS sequence number.
Fixes: 918f3c1fe8 ("SUNRPC: Improve latency for interactive ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
According to RFC2203, the RPCSEC_GSS sequence numbers are bounded to
an upper limit of MAXSEQ = 0x80000000. Ensure that we handle that
correctly.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When we resend a request, ensure that the 'rq_bytes_sent' is reset
to zero.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Init missing debug member magic with CRED_MAGIC.
Signed-off-by: Santosh kumar pradhan <santoshkumar.pradhan@wdc.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After receiving data into the page cache, we need to call flush_dcache_page()
for the architectures that define it.
Fixes: 277e4ab7d5 ("SUNRPC: Simplify TCP receive code by switching...")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The clean up is handled by the caller, rpcrdma_buffer_create(), so this
call to rpcrdma_sendctxs_destroy() leads to a double free.
Fixes: ae72950abf ("xprtrdma: Add data structure to manage RDMA Send arguments")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This should return -ENOMEM if __alloc_workqueue_key() fails, but it
returns success.
Fixes: 6d2d0ee27c ("xprtrdma: Replace rpcrdma_receive_wq with a per-xprt workqueue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
"Several fixes here. Basically split down the line between newly
introduced regressions and long existing problems:
1) Double free in tipc_enable_bearer(), from Cong Wang.
2) Many fixes to nf_conncount, from Florian Westphal.
3) op->get_regs_len() can throw an error, check it, from Yunsheng
Lin.
4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman
driver, from Scott Wood.
5) Inifnite loop in fib_empty_table(), from Yue Haibing.
6) Use after free in ax25_fillin_cb(), from Cong Wang.
7) Fix socket locking in nr_find_socket(), also from Cong Wang.
8) Fix WoL wakeup enable in r8169, from Heiner Kallweit.
9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani.
10) Fix ptr_ring wrap during queue swap, from Cong Wang.
11) Missing shutdown callback in hinic driver, from Xue Chaojing.
12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano
Brivio.
13) BPF out of bounds speculation fixes from Daniel Borkmann"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
ipv6: Consider sk_bound_dev_if when binding a socket to an address
ipv6: Fix dump of specific table with strict checking
bpf: add various test cases to selftests
bpf: prevent out of bounds speculation on pointer arithmetic
bpf: fix check_map_access smin_value test when pointer contains offset
bpf: restrict unknown scalars of mixed signed bounds for unprivileged
bpf: restrict stack pointer arithmetic for unprivileged
bpf: restrict map value pointer arithmetic for unprivileged
bpf: enable access to ax register also from verifier rewrite
bpf: move tmp variable into ax register in interpreter
bpf: move {prev_,}insn_idx into verifier env
isdn: fix kernel-infoleak in capi_unlocked_ioctl
ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error
net/hamradio/6pack: use mod_timer() to rearm timers
net-next/hinic:add shutdown callback
net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT
ip: validate header length on virtual device xmit
tap: call skb_probe_transport_header after setting skb->dev
ptr_ring: wrap back ->producer in __ptr_ring_swap_queue()
net: rds: remove unnecessary NULL check
...
Note that there is a conflict with the rdma tree in this pull request, since
we delete a file that has been changed in the rdma tree. Hopefully that's
easy enough to resolve!
We also were unable to track down a maintainer for Neil Brown's changes to
the generic cred code that are prerequisites to his RPC cred cleanup patches.
We've been asking around for several months without any response, so
hopefully it's okay to include those patches in this pull request.
Stable bugfixes:
- xprtrdma: Yet another double DMA-unmap # v4.20
Features:
- Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG
- Per-xprt rdma receive workqueues
- Drop support for FMR memory registration
- Make port= mount option optional for RDMA mounts
Other bugfixes and cleanups:
- Remove unused nfs4_xdev_fs_type declaration
- Fix comments for behavior that has changed
- Remove generic RPC credentials by switching to 'struct cred'
- Fix crossing mountpoints with different auth flavors
- Various xprtrdma fixes from testing and auditing the close code
- Fixes for disconnect issues when using xprtrdma with krb5
- Clean up and improve xprtrdma trace points
- Fix NFS v4.2 async copy reboot recovery
-----BEGIN PGP SIGNATURE-----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=DvVW
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- xprtrdma: Yet another double DMA-unmap # v4.20
Features:
- Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG
- Per-xprt rdma receive workqueues
- Drop support for FMR memory registration
- Make port= mount option optional for RDMA mounts
Other bugfixes and cleanups:
- Remove unused nfs4_xdev_fs_type declaration
- Fix comments for behavior that has changed
- Remove generic RPC credentials by switching to 'struct cred'
- Fix crossing mountpoints with different auth flavors
- Various xprtrdma fixes from testing and auditing the close code
- Fixes for disconnect issues when using xprtrdma with krb5
- Clean up and improve xprtrdma trace points
- Fix NFS v4.2 async copy reboot recovery"
* tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
sunrpc: convert to DEFINE_SHOW_ATTRIBUTE
sunrpc: Add xprt after nfs4_test_session_trunk()
sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFS
sunrpc: handle ENOMEM in rpcb_getport_async
NFS: remove unnecessary test for IS_ERR(cred)
xprtrdma: Prevent leak of rpcrdma_rep objects
NFSv4.2 fix async copy reboot recovery
xprtrdma: Don't leak freed MRs
xprtrdma: Add documenting comment for rpcrdma_buffer_destroy
xprtrdma: Replace outdated comment for rpcrdma_ep_post
xprtrdma: Update comments in frwr_op_send
SUNRPC: Fix some kernel doc complaints
SUNRPC: Simplify defining common RPC trace events
NFS: Fix NFSv4 symbolic trace point output
xprtrdma: Trace mapping, alloc, and dereg failures
xprtrdma: Add trace points for calls to transport switch methods
xprtrdma: Relocate the xprtrdma_mr_map trace points
xprtrdma: Clean up of xprtrdma chunk trace points
xprtrdma: Remove unused fields from rpcrdma_ia
xprtrdma: Cull dprintk() call sites
...
NFSv4.2 client, and cleaning up some convoluted backchannel server code
in the process. Otherwise, miscellaneous smaller bugfixes and cleanup.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcLR3nAAoJECebzXlCjuG+oyAQALrPSTH9Qg2AwP2eGm+AevUj
u/VFmimImIO9dYuT02t4w42w4qMIQ0/Y7R0UjT3DxG5Oixy/zA+ZaNXCCEKwSMIX
abGF4YalUISbDc6n0Z8J14/T33wDGslhy3IQ9Jz5aBCDCocbWlzXvFlmrowbb3ak
vtB0Fc3Xo6Z/Pu2GzNzlqR+f69IAmwQGJrRrAEp3JUWSIBKiSWBXTujDuVBqJNYj
ySLzbzyAc7qJfI76K635XziULR2ueM3y5JbPX7kTZ0l3OJ6Yc0PtOj16sIv5o0XK
DBYPrtvw3ZbxQE/bXqtJV9Zn6MG5ODGxKszG1zT1J3dzotc9l/LgmcAY8xVSaO+H
QNMdU9QuwmyUG20A9rMoo/XfUb5KZBHzH7HIYOmkfBidcaygwIInIKoIDtzimm4X
OlYq3TL/3QDY6rgTCZv6n2KEnwiIDpc5+TvFhXRWclMOJMcMSHJfKFvqERSv9V3o
90qrCebPA0K8Dnc0HMxcBXZ+0TqZ2QeXp/wfIjibCXqMwlg+BZhmbeA0ngZ7x7qf
2F33E9bfVJjL+VI5FcVYQf43bOTWZgD6ZKGk4T7keYl0CPH+9P70bfhl4KKy9dqc
GwYooy/y5FPb2CvJn/EETeILRJ9OyIHUrw7HBkpz9N8n9z+V6Qbp9yW7LKgaMphW
1T+GpHZhQjwuBPuJhDK0
=dRLp
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Thanks to Vasily Averin for fixing a use-after-free in the
containerized NFSv4.2 client, and cleaning up some convoluted
backchannel server code in the process.
Otherwise, miscellaneous smaller bugfixes and cleanup"
* tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux: (25 commits)
nfs: fixed broken compilation in nfs_callback_up_net()
nfs: minor typo in nfs4_callback_up_net()
sunrpc: fix debug message in svc_create_xprt()
sunrpc: make visible processing error in bc_svc_process()
sunrpc: remove unused xpo_prep_reply_hdr callback
sunrpc: remove svc_rdma_bc_class
sunrpc: remove svc_tcp_bc_class
sunrpc: remove unused bc_up operation from rpc_xprt_ops
sunrpc: replace svc_serv->sv_bc_xprt by boolean flag
sunrpc: use-after-free in svc_process_common()
sunrpc: use SVC_NET() in svcauth_gss_* functions
nfsd: drop useless LIST_HEAD
lockd: Show pid of lockd for remote locks
NFSD remove OP_CACHEME from 4.2 op_flags
nfsd: Return EPERM, not EACCES, in some SETATTR cases
sunrpc: fix cache_head leak due to queued request
nfsd: clean up indentation, increase indentation in switch statement
svcrdma: Optimize the logic that selects the R_key to invalidate
nfsd: fix a warning in __cld_pipe_upcall()
nfsd4: fix crash on writing v4_end_grace before nfsd startup
...
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Multipathing: In case of NFSv3, rpc_clnt_test_and_add_xprt() adds
the xprt to xprt switch (i.e. xps) if rpc_call_null_helper() returns
success. But in case of NFSv4.1, it needs to do EXCHANGEID to verify
the path along with check for session trunking.
Add the xprt in nfs4_test_session_trunk() only when
nfs4_detect_session_trunking() returns success. Also release refcount
hold by rpc_clnt_setup_test_and_add_xprt().
Signed-off-by: Santosh kumar pradhan <santoshkumar.pradhan@wdc.com>
Tested-by: Suresh Jayaraman <suresh.jayaraman@wdc.com>
Reported-by: Aditya Agnihotri <aditya.agnihotri@wdc.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
It's OK to sleep here, we just don't want to recurse into the filesystem
as a writeout could be waiting on this.
Future work: the documentation for GFP_NOFS says "Please try to avoid
using this flag directly and instead use memalloc_nofs_{save,restore} to
mark the whole scope which cannot/shouldn't recurse into the FS layer
with a short explanation why. All allocation requests will inherit
GFP_NOFS implicitly."
But I'm not sure where to do this. Should the workqueue be arranging
that for us in the case of workqueues created with WQ_MEM_RECLAIM?
Reported-by: Trond Myklebust <trondmy@hammer.space>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we ignore the error we'll hit a null dereference a little later.
Reported-by: syzbot+4b98281f2401ab849f4b@syzkaller.appspotmail.com
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If a reply has been processed but the RPC is later retransmitted
anyway, the req->rl_reply field still contains the only pointer to
the old rpcrdma rep. When the next reply comes in, the reply handler
will stomp on the rl_reply field, leaking the old rep.
A trace event is added to capture such leaks.
This problem seems to be worsened by the restructuring of the RPC
Call path in v4.20. Fully addressing this issue will require at
least a re-architecture of the disconnect logic, which is not
appropriate during -rc.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Defensive clean up. Don't set frwr->fr_mr until we know that the
scatterlist allocation has succeeded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make a note of the function's dependency on an earlier ib_drain_qp.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit 7c8d9e7c88 ("xprtrdma: Move Receive posting to
Receive handler"), rpcrdma_ep_post is no longer responsible for
posting Receive buffers. Update the documenting comment to reflect
this change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit f287762308 ("xprtrdma: Chain Send to FastReg WRs") was
written before commit ce5b371782 ("xprtrdma: Replace all usage of
"frmr" with "frwr""), but was merged afterwards. Thus it still
refers to FRMR and MWs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up some warnings observed when building with "make W=1".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These are rare, but can be helpful at tracking down DMAR and other
problems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Name them "trace_xprtrdma_op_*" so they can be easily enabled as a
group. No trace point is added where the generic layer already has
observability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The mr_map trace points were capturing information about the previous
use of the MR rather than about the segment that was just mapped.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The chunk-related trace points capture nearly the same information
as the MR-related trace points.
Also, rename them so globbing can be used to enable or disable
these trace points more easily.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. The last use of these fields was in commit 173b8f49b3
("xprtrdma: Demote "connect" log messages") .
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Remove dprintk() call sites that report rare or impossible
errors. Leave a few that display high-value low noise status
information.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: There's little chance of contention between the use of
rb_lock and rb_reqslock, so merge the two. This avoids having to
take both in some (possibly future) cases.
Transport tear-down is already serialized, thus there is no need for
locking at all when destroying rpcrdma_reqs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For better observability of parsing errors, return the error code
generated in the decoders to the upper layer consumer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit ffe1f0df58 ("rpcrdma: Merge svcrdma and xprtrdma
modules into one"), the forward and backchannel components are part
of the same kernel module. A separate request_module() call in the
backchannel code is no longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 431f6eb357 ("SUNRPC: Add a label for RPC calls that require
allocation on receive") didn't update similar logic in rpc_rdma.c.
I don't think this is a bug, per-se; the commit just adds more
careful checking for broken upper layer behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Place the associated RPC transaction's XID in the upper 32 bits of
each RDMA segment's rdma_offset field. There are two reasons to do
this:
- The R_key only has 8 bits that are different from registration to
registration. The XID adds more uniqueness to each RDMA segment to
reduce the likelihood of a software bug on the server reading from
or writing into memory it's not supposed to.
- On-the-wire RDMA Read and Write requests do not otherwise carry
any identifier that matches them up to an RPC. The XID in the
upper 32 bits will act as an eye-catcher in network captures.
Suggested-by: Tom Talpey <ttalpey@microsoft.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Now that there is only FRWR, there is no need for a memory
registration switch. The indirect calls to the memreg operations can
be replaced with faster direct calls.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
FMR is not supported on most recent RDMA devices. It is also less
secure than FRWR because an FMR memory registration can expose
adjacent bytes to remote reading or writing. As discussed during the
RDMA BoF at LPC 2018, it is time to remove support for FMR in the
NFS/RDMA client stack.
Note that NFS/RDMA server-side uses either local memory registration
or FRWR. FMR is not used.
There are a few Infiniband/RoCE devices in the kernel tree that do
not appear to support MEM_MGT_EXTENSIONS (FRWR), and therefore will
not support client-side NFS/RDMA after this patch. These are:
- mthca
- qib
- hns (RoCE)
Users of these devices can use NFS/TCP on IPoIB instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some devices advertise a large max_fast_reg_page_list_len
capability, but perform optimally when MRs are significantly smaller
than that depth -- probably when the MR itself is no larger than a
page.
By default, the RDMA R/W core API uses max_sge_rd as the maximum
page depth for MRs. For some devices, the value of max_sge_rd is
1, which is also not optimal. Thus, when max_sge_rd is larger than
1, use that value. Otherwise use the value of the
max_fast_reg_page_list_len attribute.
I've tested this with CX-3 Pro, FastLinq, and CX-5 devices. It
reproducibly improves the throughput of large I/Os by several
percent.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
With certain combinations of krb5i/p, MR size, and r/wsize, I/O can
fail with EMSGSIZE. This is because the calculated value of
ri_max_segs (the max number of MRs per RPC) exceeded
RPCRDMA_MAX_HDR_SEGS, which caused Read or Write list encoding to
walk off the end of the transport header.
Once that was addressed, the ro_maxpages result has to be corrected
to account for the number of MRs needed for Reply chunks, which is
2 MRs smaller than a normal Read or Write chunk.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Transport disconnect processing does a "wake pending tasks" at
various points.
Suppose an RPC Reply is being processed. The RPC task that Reply
goes with is waiting on the pending queue. If a disconnect wake-up
happens before reply processing is done, that reply, even if it is
good, is thrown away, and the RPC has to be sent again.
This window apparently does not exist for socket transports because
there is a lock held while a reply is being received which prevents
the wake-up call until after reply processing is done.
To resolve this, all RPC replies being processed on an RPC-over-RDMA
transport have to complete before pending tasks are awoken due to a
transport disconnect.
Callers that already hold the transport write lock may invoke
->ops->close directly. Others use a generic helper that schedules
a close when the write lock can be taken safely.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After thinking about this more, and auditing other kernel ULP imple-
mentations, I believe that a DISCONNECT cm_event will occur after a
fatal QP event. If that's the case, there's no need for an explicit
disconnect in the QP event handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To address a connection-close ordering problem, we need the ability
to drain the RPC completions running on rpcrdma_receive_wq for just
one transport. Give each transport its own RPC completion workqueue,
and drain that workqueue when disconnecting the transport.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Divide the work cleanly:
- rpcrdma_wc_receive is responsible only for RDMA Receives
- rpcrdma_reply_handler is responsible only for RPC Replies
- the posted send and receive counts both belong in rpcrdma_ep
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The recovery case in frwr_op_unmap_sync needs to DMA unmap each MR.
frwr_release_mr does not DMA-unmap, but the recycle worker does.
Fixes: 61da886bf7 ("xprtrdma: Explicitly resetting MRs is ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
While chasing yet another set of DMAR fault reports, I noticed that
the frwr recycler conflates whether or not an MR has been DMA
unmapped with frwr->fr_state. Actually the two have only an indirect
relationship. It's in fact impossible to guess reliably whether the
MR has been DMA unmapped based on its fr_state field, especially as
the surrounding code and its assumptions have changed over time.
A better approach is to track the DMA mapping status explicitly so
that the recycler is less brittle to unexpected situations, and
attempts to DMA-unmap a second time are prevented.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.20
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Al Viro mentioned (Message-ID
<20170626041334.GZ10672@ZenIV.linux.org.uk>)
that there is probably a race condition
lurking in accesses of sk_stamp on 32-bit machines.
sock->sk_stamp is of type ktime_t which is always an s64.
On a 32 bit architecture, we might run into situations of
unsafe access as the access to the field becomes non atomic.
Use seqlocks for synchronization.
This allows us to avoid using spinlocks for readers as
readers do not need mutual exclusion.
Another approach to solve this is to require sk_lock for all
modifications of the timestamps. The current approach allows
for timestamps to have their own lock: sk_stamp_lock.
This allows for the patch to not compete with already
existing critical sections, and side effects are limited
to the paths in the patch.
The addition of the new field maintains the data locality
optimizations from
commit 9115e8cd2a ("net: reorganize struct sock for better data
locality")
Note that all the instances of the sk_stamp accesses
are either through the ioctl or the syscall recvmsg.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting to
get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5,
qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use write()
for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into
a big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and sysfs
files
- First steps toward removing 'uobject' from the view of the drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlwhV2oACgkQOG33FX4g
mxpF8A/9EkRCg6wCDC59maA53b5PjuNmD//9hXbycQPQSlxntI2PyYtxrzBqc0+2
yIaFFMehL41XNN6y1zfkl7ndl62McCH2TpiidU8RyTxVw/e3KsDD5sU6++atfHRo
M82RNfedDtxPG8TcCPKVLof6JHADApGSR1r4dCYfAnu7KFMyvlLmeYyx4r/2E6yC
iQPmtKVOdbGkuWGeX+brGEA0vg7FUOAvaysnxddjyh9hyem4h0SUR3Af/Ik0N5ME
PYzC+hMKbkPVBLoCWyg7QwUaqK37uWwguMQLtI2byF7FgbiK/lBQt6TsidR4Fw3p
EalL7uqxgCTtLYh918vxLFjdYt6laka9j7xKCX8M8d06sy/Lo8iV4hWjiTESfMFG
usqs7D6p09gA/y1KISji81j6BI7C92CPVK2drKIEnfyLgY5dBNFcv9m2H12lUCH2
NGbfCNVaTQVX6bFWPpy2Bt2y/Litsfxw5RviehD7jlG0lQjsXGDkZzsDxrMSSlNU
S79iiTJyK4kUZkXzrSSlN58pLBlbupJwm5MDjKmM+irsrsCHjGIULvc902qtnC3/
8ImiTtW6XvqLbgWXyy2Th8/ZgRY234p1ybhog+DFaGKUch0XqB7VXTV2OZm0GjcN
Fp4PUeBt+/gBgYqjpuffqQc1rI4uwXYSoz7wq9RBiOpw5zBFT1E=
=T0p1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting
to get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4,
mlx5, qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use
write() for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into a
big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page
tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and
sysfs files
- First steps toward removing 'uobject' from the view of the drivers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits)
RDMA/srpt: Use kmem_cache_free() instead of kfree()
RDMA/mlx5: Signedness bug in UVERBS_HANDLER()
IB/uverbs: Signedness bug in UVERBS_HANDLER()
IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported
IB/umad: Start using dev_groups of class
IB/umad: Use class_groups and let core create class file
IB/umad: Refactor code to use cdev_device_add()
IB/umad: Avoid destroying device while it is accessed
IB/umad: Simplify and avoid dynamic allocation of class
IB/mlx5: Fix wrong error unwind
IB/mlx4: Remove set but not used variable 'pd'
RDMA/iwcm: Don't copy past the end of dev_name() string
IB/mlx5: Fix long EEH recover time with NVMe offloads
IB/mlx5: Simplify netdev unbinding
IB/core: Move query port to ioctl
RDMA/nldev: Expose port_cap_flags2
IB/core: uverbs copy to struct or zero helper
IB/rxe: Reuse code which sets port state
IB/rxe: Make counters thread safe
IB/mlx5: Use the correct commands for UMEM and UCTX allocation
...
_svc_create_xprt() returns positive port number
so its non-zero return value is not an error
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Force bc_svc_process() to generate debug message after processing errors
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
xpo_prep_reply_hdr are not used now.
It was defined for tcp transport only, however it cannot be
called indirectly, so let's move it to its caller and
remove unused callback.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove svc_xprt_class svc_rdma_bc_class and related functions.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove svc_xprt_class svc_tcp_bc_class and related functions
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_serv-> sv_bc_xprt is netns-unsafe and cannot be used as pointer.
To prevent its misuse in future it is replaced by new boolean flag.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
if node have NFSv41+ mounts inside several net namespaces
it can lead to use-after-free in svc_process_common()
svc_process_common()
/* Setup reply header */
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp); <<< HERE
svc_process_common() can use incorrect rqstp->rq_xprt,
its caller function bc_svc_process() takes it from serv->sv_bc_xprt.
The problem is that serv is global structure but sv_bc_xprt
is assigned per-netnamespace.
According to Trond, the whole "let's set up rqstp->rq_xprt
for the back channel" is nothing but a giant hack in order
to work around the fact that svc_process_common() uses it
to find the xpt_ops, and perform a couple of (meaningless
for the back channel) tests of xpt_flags.
All we really need in svc_process_common() is to be able to run
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr()
Bruce J Fields points that this xpo_prep_reply_hdr() call
is an awfully roundabout way just to do "svc_putnl(resv, 0);"
in the tcp case.
This patch does not initialiuze rqstp->rq_xprt in bc_svc_process(),
now it calls svc_process_common() with rqstp->rq_xprt = NULL.
To adjust reply header svc_process_common() just check
rqstp->rq_prot and calls svc_tcp_prep_reply_hdr() for tcp case.
To handle rqstp->rq_xprt = NULL case in functions called from
svc_process_common() patch intruduces net namespace pointer
svc_rqst->rq_bc_net and adjust SVC_NET() definition.
Some other function was also adopted to properly handle described case.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: stable@vger.kernel.org
Fixes: 23c20ecd44 ("NFS: callback up - users counting cleanup")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
1/ discard 'struct unx_cred'. We don't need any data that
is not already in 'struct rpc_cred'.
2/ Don't keep these creds in a hash table. When a credential
is needed, simply allocate it. When not needed, discard it.
This can easily be faster than performing a lookup on
a shared hash table.
As the lookup can happen during write-out, use a mempool
to ensure forward progress.
This means that we cannot compare two credentials for
equality by comparing the pointers, but we never do that anyway.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This now always just does get_rpccred(), so we
don't need an operation pointer to know to do that.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
SUNRPC has two sorts of credentials, both of which appear as
"struct rpc_cred".
There are "generic credentials" which are supplied by clients
such as NFS and passed in 'struct rpc_message' to indicate
which user should be used to authorize the request, and there
are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS
which describe the credential to be sent over the wires.
This patch replaces all the generic credentials by 'struct cred'
pointers - the credential structure used throughout Linux.
For machine credentials, there is a special 'struct cred *' pointer
which is statically allocated and recognized where needed as
having a special meaning. A look-up of a low-level cred will
map this to a machine credential.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
NFS needs to know when a credential is about to expire so that
it can modify write-back behaviour to finish the write inside the
expiry time.
It currently uses functions in SUNRPC code which make use of a
fairly complex callback scheme and flags in the generic credientials.
As I am working to discard the generic credentials, this has to change.
This patch moves the logic into NFS, in part by finding and caching
the low-level credential in the open_context. We then make direct
cred-api calls on that.
This makes the code much simpler and removes a dependency on generic
rpc credentials.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The credential passed in rpc_message.rpc_cred is always a
generic credential except in one instance.
When gss_destroying_context() calls rpc_call_null(), it passes
a specific credential that it needs to destroy.
In this case the RPC acts *on* the credential rather than
being authorized by it.
This special case deserves explicit support and providing that will
mean that rpc_message.rpc_cred is *always* generic, allowing
some optimizations.
So add "tk_op_cred" to rpc_task and "rpc_op_cred" to the setup data.
Use this to pass the cred down from rpc_call_null(), and have
rpcauth_bindcred() notice it and bind it in place.
Credit to kernel test robot <fengguang.wu@intel.com> for finding
a bug in earlier version of this patch.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In almost all cases the credential stored in rpc_message.rpc_cred
is a "generic" credential. One of the two expections is when an
AUTH_NULL credential is used such as for RPC ping requests.
To improve consistency, don't pass an explicit credential in
these cases, but instead pass NULL and set a task flag,
similar to RPC_TASK_ROOTCREDS, which requests that NULL credentials
be used by default.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When NFS creates a machine credential, it is a "generic" credential,
not tied to any auth protocol, and is really just a container for
the princpal name.
This doesn't get linked to a genuine credential until rpcauth_bindcred()
is called.
The lookup always succeeds, so various places that test if the machine
credential is NULL, are pointless.
As a step towards getting rid of generic credentials, this patch gets
rid of generic machine credentials. The nfs_client and rpc_client
just hold a pointer to a constant principal name.
When a machine credential is wanted, a special static 'struct rpc_cred'
pointer is used. rpcauth_bindcred() recognizes this, finds the
principal from the client, and binds the correct credential.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The cred is a machine_cred iff ->principal is set, so there is no
need for the extra flag.
There is one case which deserves some
explanation. nfs4_root_machine_cred() calls rpc_lookup_machine_cred()
with a NULL principal name which results in not getting a machine
credential, but getting a root credential instead.
This appears to be what is expected of the caller, and is
clearly the result provided by both auth_unix and auth_gss
which already ignore the flag.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We can use cred->groupinfo (from the 'struct cred') instead.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The SUNRPC credential framework was put together before
Linux has 'struct cred'. Now that we have it, it makes sense to
use it.
This first step just includes a suitable 'struct cred *' pointer
in every 'struct auth_cred' and almost every 'struct rpc_cred'.
The rpc_cred used for auth_null has a NULL 'struct cred *' as nothing
else really makes sense.
For rpc_cred, the pointer is reference counted.
For auth_cred it isn't. struct auth_cred are either allocated on
the stack, in which case the thread owns a reference to the auth,
or are part of 'struct generic_cred' in which case gc_base owns the
reference, and "acred" shares it.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we want /proc/sys/sunrpc the current kernel also drags in other debug
features which we don't really want. Instead, we should always show the
following entries:
/proc/sys/sunrpc/udp_slot_table_entries
/proc/sys/sunrpc/tcp_slot_table_entries
/proc/sys/sunrpc/tcp_max_slot_table_entries
/proc/sys/sunrpc/min_resvport
/proc/sys/sunrpc/max_resvport
/proc/sys/sunrpc/tcp_fin_timeout
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Over the years, xprt_connect_status() has been superseded by
call_connect_status(), which now handles all the errors that
xprt_connect_status() does and more. Since the latter converts
all errors that it doesn't recognise to EIO, then it is time
for it to be retired.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that
we don't have races between the (asynchronous) socket setup code and
tasks in xprt_connect().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
When the socket is closed, we need to call xprt_disconnect_done() in order
to clean up the XPRT_WRITE_SPACE flag, and wake up the sleeping tasks.
However, we also want to ensure that we don't wake them up before the socket
is closed, since that would cause thundering herd issues with everyone
piling up to retransmit before the TCP shutdown dance has completed.
Only the task that holds XPRT_LOCKED needs to wake up early in order to
allow the close to complete.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Reported-by: Scott Mayhew <smayhew@redhat.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Make all the required change to start use the ib_device_ops structure.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Several conflicts, seemingly all over the place.
I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.
The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.
The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.
cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.
__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy. Or at least I think it was :-)
Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.
The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.
Signed-off-by: David S. Miller <davem@davemloft.net>
If the connection is broken, then xs_tcp_state_change() will take care
of scheduling the socket close as soon as appropriate. xs_read_stream()
just needs to report the error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that we do not exit the socket read callback without clearing
XPRT_SOCK_DATA_READY.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When discarding message data from the stream, we're better off using
the discard iterator, since that will work with non-TCP streams.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the allocator fails before it has reached the target number of pages,
then we need to recheck that we're not seeking past the page buffer.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The RPC code is occasionally hanging when the receive code fails to
empty the socket buffer due to a partial read of the data. When we
convert that to an EAGAIN, it appears we occasionally leave data in the
socket. The fix is to just keep reading until the socket returns
EAGAIN/EWOULDBLOCK.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Cristian Marussi <cristian.marussi@arm.com>
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
After commit d202cce896, an expired cache_head can be removed from the
cache_detail's hash.
However, the expired cache_head may be waiting for a reply from a
previously submitted request. Such a cache_head has an increased
refcounter and therefore it won't be freed after cache_put(freeme).
Because the cache_head was removed from the hash it cannot be found
during cache_clean() and can be leaked forever, together with stalled
cache_request and other taken resources.
In our case we noticed it because an entry in the export cache was
holding a reference on a filesystem.
Fixes d202cce896 ("sunrpc: never return expired entries in sunrpc_cache_lookup")
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: stable@kernel.org # 2.6.35
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If an asynchronous connection attempt completes while another task is
in xprt_connect(), then the call to rpc_sleep_on() could end up
racing with the call to xprt_wake_pending_tasks().
So add a second test of the connection state after we've put the
task to sleep and set the XPRT_CONNECTING flag, when we know that there
can be no asynchronous connection attempts still in progress.
Fixes: 0b9e794313 ("SUNRPC: Move the test for XPRT_CONNECTING into...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we retransmit an RPC request, we currently end up clobbering the
value of req->rq_rcv_buf.bvec that was allocated by the initial call to
xprt_request_prepare(req).
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
call_encode can be invoked more than once per RPC call. Ensure that
each call to gss_wrap_req_priv does not overwrite pointers to
previously allocated memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a task failed to get the write lock in the call to xprt_connect(), then
it will be queued on xprt->sending. In that case, it is possible for it
to get transmitted before the call to call_connect_status(), in which
case it needs to be handled by call_transmit_status() instead.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
o Select the R_key to invalidate while the CPU cache still contains
the received RPC Call transport header, rather than waiting until
we're about to send the RPC Reply.
o Choose Send With Invalidate if there is exactly one distinct R_key
in the received transport header. If there's more than one, the
client will have to perform local invalidation after it has
already waited for remote invalidation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently netdev_rx_csum_fault() only shows a device name,
we need more information about the skb for debugging csum
failures.
Sample output:
ens3: hw csum failure
dev features: 0x0000000000014b89
skb len=84 data_len=0 pkt_type=0 gso_size=0 gso_type=0 nr_frags=0 ip_summed=0 csum=0 csum_complete_sw=0 csum_valid=0 csum_level=0
Note, I use pr_err() just to be consistent with the existing one.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Highlights include:
Stable fixes:
- Don't exit the NFSv4 state manager without clearing NFS4CLNT_MANAGER_RUNNING
Bugfixes:
- Fix an Oops when destroying the RPCSEC_GSS credential cache
- Fix an Oops during delegation callbacks
- Ensure that the NFSv4 state manager exits the loop on SIGKILL
- Fix a bogus get/put in generic_key_to_expire()
-----BEGIN PGP SIGNATURE-----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=AstN
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Don't exit the NFSv4 state manager without clearing
NFS4CLNT_MANAGER_RUNNING
Bugfixes:
- Fix an Oops when destroying the RPCSEC_GSS credential cache
- Fix an Oops during delegation callbacks
- Ensure that the NFSv4 state manager exits the loop on SIGKILL
- Fix a bogus get/put in generic_key_to_expire()"
* tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix an Oops during delegation callbacks
SUNRPC: Fix a bogus get/put in generic_key_to_expire()
SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cache
NFSv4: Ensure that the state manager exits the loop on SIGKILL
NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING
Commit 07d02a67b7 causes a use-after free in the RPCSEC_GSS credential
destroy code, because the call to get_rpccred() in gss_destroying_context()
will now always fail to increment the refcount.
While we could just replace the get_rpccred() with a refcount_set(), that
would have the unfortunate consequence of resurrecting a credential in
the credential cache for which we are in the process of destroying the
RPCSEC_GSS context. Rather than do this, we choose to make a copy that
is never added to the cache and use that to destroy the context.
Fixes: 07d02a67b7 ("SUNRPC: Simplify lookup code")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
There is no need to have the '__be32 *p' variable static since new value
always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When truncating the encode buffer, the page_ptr is getting
advanced, causing the next page to be skipped while encoding.
The page is still included in the response, so the response
contains a page of bogus data.
We need to adjust the page_ptr backwards to ensure we encode
the next page into the correct place.
We saw this triggered when concurrent directory modifications caused
nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting
call to xdr_truncate_encode() corrupted the READDIR reply.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
sunrpc patches from nfs tree conflict with calling conventions change done
in iov_iter work. Trivial fixup...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The seq_send & seq_send64 fields in struct krb5_ctx are used as
atomically incrementing counters. This is implemented using cmpxchg() &
cmpxchg64() to implement what amount to custom versions of
atomic_fetch_inc() & atomic64_fetch_inc().
Besides the duplication, using cmpxchg64() has another major drawback in
that some 32 bit architectures don't provide it. As such commit
571ed1fd23 ("SUNRPC: Replace krb5_seq_lock with a lockless scheme")
resulted in build failures for some architectures.
Change seq_send to be an atomic_t and seq_send64 to be an atomic64_t,
then use atomic(64)_* functions to manipulate the values. The atomic64_t
type & associated functions are provided even on architectures which
lack real 64 bit atomic memory access via CONFIG_GENERIC_ATOMIC64 which
uses spinlocks to serialize access. This fixes the build failures for
architectures lacking cmpxchg64().
A potential alternative that was raised would be to provide cmpxchg64()
on the 32 bit architectures that currently lack it, using spinlocks.
However this would provide a version of cmpxchg64() with semantics a
little different to the implementations on architectures with real 64
bit atomics - the spinlock-based implementation would only work if all
access to the memory used with cmpxchg64() is *always* performed using
cmpxchg64(). That is not currently a requirement for users of
cmpxchg64(), and making it one seems questionable. As such avoiding
cmpxchg64() outside of architecture-specific code seems best,
particularly in cases where atomic64_t seems like a better fit anyway.
The CONFIG_GENERIC_ATOMIC64 implementation of atomic64_* functions will
use spinlocks & so faces the same issue, but with the key difference
that the memory backing an atomic64_t ought to always be accessed via
the atomic64_* functions anyway making the issue moot.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 571ed1fd23 ("SUNRPC: Replace krb5_seq_lock with a lockless scheme")
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
already supported COPY, by copying a limited amount of data and then
returning a short result, letting the client resend. The asynchronous
protocol should offer better performance at the expense of some
complexity.
The other highlight is Trond's work to convert the duplicate reply cache
to a red-black tree, and to move it and some other server caches to RCU.
(Previously these have meant taking global spinlocks on every RPC.)
Otherwise, some RDMA work and miscellaneous bugfixes.
-----BEGIN PGP SIGNATURE-----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=TTo0
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Olga added support for the NFSv4.2 asynchronous copy protocol. We
already supported COPY, by copying a limited amount of data and then
returning a short result, letting the client resend. The asynchronous
protocol should offer better performance at the expense of some
complexity.
The other highlight is Trond's work to convert the duplicate reply
cache to a red-black tree, and to move it and some other server caches
to RCU. (Previously these have meant taking global spinlocks on every
RPC)
Otherwise, some RDMA work and miscellaneous bugfixes"
* tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linux: (30 commits)
lockd: fix access beyond unterminated strings in prints
nfsd: Fix an Oops in free_session()
nfsd: correctly decrement odstate refcount in error path
svcrdma: Increase the default connection credit limit
svcrdma: Remove try_module_get from backchannel
svcrdma: Remove ->release_rqst call in bc reply handler
svcrdma: Reduce max_send_sges
nfsd: fix fall-through annotations
knfsd: Improve lookup performance in the duplicate reply cache using an rbtree
knfsd: Further simplify the cache lookup
knfsd: Simplify NFS duplicate replay cache
knfsd: Remove dead code from nfsd_cache_lookup
SUNRPC: Simplify TCP receive code
SUNRPC: Replace the cache_detail->hash_lock with a regular spinlock
SUNRPC: Remove non-RCU protected lookup
NFS: Fix up a typo in nfs_dns_ent_put
NFS: Lockless DNS lookups
knfsd: Lockless lookup of NFSv4 identities.
SUNRPC: Lockless server RPCSEC_GSS context lookup
knfsd: Allow lockless lookups of the exports
...
In call_xpt_users(), we delete the entry from the list, but we
do not reinitialise it. This triggers the list poisoning when
we later call unregister_xpt_user() in nfsd4_del_conns().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since commit ffe1f0df58 ("rpcrdma: Merge svcrdma and xprtrdma
modules into one"), the forward and backchannel components are part
of the same kernel module. A separate try_module_get() call in the
backchannel code is no longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Similar to a change made in the client's forward channel reply
handler: The xprt_release_rqst_cong() call is not necessary.
Also, release xprt->recv_lock when taking xprt->transport_lock
to avoid disabling and enabling BH's while holding another
spin lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no need to request a large number of send SGEs because the
inline threshold already constrains the number of SGEs per Send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use the fact that the iov iterators already have functionality for
skipping a base offset.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that the reader functions are all RCU protected, use a regular
spinlock rather than a reader/writer lock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up the cache code by removing the non-RCU protected lookup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use RCU protection for looking up the RPCSEC_GSS context.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Convert structs ip_map and unix_gid to use RCU protected lookups.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Instead of the reader/writer spinlock, allow cache lookups to use RCU
for looking up entries. This is more efficient since modifications can
occur while other entries are being looked up.
Note that for now, we keep the reader/writer spinlock until all users
have been converted to use RCU-safe freeing of their cache entries.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Highlights include:
Stable fixes:
- Fix the NFSv4.1 r/wsize sanity checking
- Reset the RPC/RDMA credit grant properly after a disconnect
- Fix a missed page unlock after pg_doio()
Features and optimisations:
- Overhaul of the RPC client socket code to eliminate a locking bottleneck
and reduce the latency when transmitting lots of requests in parallel.
- Allow parallelisation of the RPCSEC_GSS encoding of an RPC request.
- Convert the RPC client socket receive code to use iovec_iter() for
improved efficiency.
- Convert several NFS and RPC lookup operations to use RCU instead of
taking global locks.
- Avoid the need for BH-safe locks in the RPC/RDMA back channel.
Bugfixes and cleanups:
- Fix lock recovery during NFSv4 delegation recalls
- Fix the NFSv4 + NFSv4.1 "lookup revalidate + open file" case.
- Fixes for the RPC connection metrics
- Various RPC client layer cleanups to consolidate stream based sockets
- RPC/RDMA connection cleanups
- Simplify the RPC/RDMA cleanup after memory operation failures
- Clean ups for NFS v4.2 copy completion and NFSv4 open state reclaim.
-----BEGIN PGP SIGNATURE-----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=Fn8z
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.20-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix the NFSv4.1 r/wsize sanity checking
- Reset the RPC/RDMA credit grant properly after a disconnect
- Fix a missed page unlock after pg_doio()
Features and optimisations:
- Overhaul of the RPC client socket code to eliminate a locking
bottleneck and reduce the latency when transmitting lots of
requests in parallel.
- Allow parallelisation of the RPCSEC_GSS encoding of an RPC request.
- Convert the RPC client socket receive code to use iovec_iter() for
improved efficiency.
- Convert several NFS and RPC lookup operations to use RCU instead of
taking global locks.
- Avoid the need for BH-safe locks in the RPC/RDMA back channel.
Bugfixes and cleanups:
- Fix lock recovery during NFSv4 delegation recalls
- Fix the NFSv4 + NFSv4.1 "lookup revalidate + open file" case.
- Fixes for the RPC connection metrics
- Various RPC client layer cleanups to consolidate stream based
sockets
- RPC/RDMA connection cleanups
- Simplify the RPC/RDMA cleanup after memory operation failures
- Clean ups for NFS v4.2 copy completion and NFSv4 open state
reclaim"
* tag 'nfs-for-4.20-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (97 commits)
SUNRPC: Convert the auth cred cache to use refcount_t
SUNRPC: Convert auth creds to use refcount_t
SUNRPC: Simplify lookup code
SUNRPC: Clean up the AUTH cache code
NFS: change sign of nfs_fh length
sunrpc: safely reallow resvport min/max inversion
nfs: remove redundant call to nfs_context_set_write_error()
nfs: Fix a missed page unlock after pg_doio()
SUNRPC: Fix a compile warning for cmpxchg64()
NFSv4.x: fix lock recovery during delegation recall
SUNRPC: use cmpxchg64() in gss_seq_send64_fetch_and_inc()
xprtrdma: Squelch a sparse warning
xprtrdma: Clean up xprt_rdma_disconnect_inject
xprtrdma: Add documenting comments
xprtrdma: Report when there were zero posted Receives
xprtrdma: Move rb_flags initialization
xprtrdma: Don't disable BH's in backchannel server
xprtrdma: Remove memory address of "ep" from an error message
xprtrdma: Rename rpcrdma_qp_async_error_upcall
xprtrdma: Simplify RPC wake-ups on connect
...
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.
Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.
Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>
We no longer need to worry about whether or not the entry is hashed in
order to figure out if the contents are valid. We only care whether or
not the refcount is non-zero.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable bugfixes:
- Reset credit grant properly after a disconnect
Other bugfixes and cleanups:
- xprt_release_rqst_cong is called outside of transport_lock
- Create more MRs at a time and toss out old ones during recovery
- Various improvements to the RDMA connection and disconnection code:
- Improve naming of trace events, functions, and variables
- Add documenting comments
- Fix metrics and stats reporting
- Fix a tracepoint sparse warning
-----BEGIN PGP SIGNATURE-----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=SxSD
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.20-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFS RDMA client updates for Linux 4.20
Stable bugfixes:
- Reset credit grant properly after a disconnect
Other bugfixes and cleanups:
- xprt_release_rqst_cong is called outside of transport_lock
- Create more MRs at a time and toss out old ones during recovery
- Various improvements to the RDMA connection and disconnection code:
- Improve naming of trace events, functions, and variables
- Add documenting comments
- Fix metrics and stats reporting
- Fix a tracepoint sparse warning
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Commits ffb6ca33b0 and e08ea3a96f prevent setting xprt_min_resvport
greater than xprt_max_resvport, but may also break simple code that sets
one parameter then the other, if the new range does not overlap the old.
Also it looks racy to me, unless there's some serialization I'm not
seeing. Granted it would probably require malicious privileged processes
(unless there's a chance these might eventually be settable in unprivileged
containers), but still it seems better not to let userspace panic the
kernel.
Simpler seems to be to allow setting the parameters to whatever you want
but interpret xprt_min_resvport > xprt_max_resvport as the empty range.
Fixes: ffb6ca33b0 "sunrpc: Prevent resvport min/max inversion..."
Fixes: e08ea3a96f "sunrpc: Prevent rexvport min/max inversion..."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The newly introduced gss_seq_send64_fetch_and_inc() fails to build on
32-bit architectures:
net/sunrpc/auth_gss/gss_krb5_seal.c:144:14: note: in expansion of macro 'cmpxchg'
seq_send = cmpxchg(&ctx->seq_send64, old, old + 1);
^~~~~~~
arch/x86/include/asm/cmpxchg.h:128:3: error: call to '__cmpxchg_wrong_size' declared with attribute error: Bad argument size for cmpxchg
__cmpxchg_wrong_size(); \
As the message tells us, cmpxchg() cannot be used on 64-bit arguments,
that's what cmpxchg64() does.
Fixes: 571ed1fd23 ("SUNRPC: Replace krb5_seq_lock with a lockless scheme")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: Use the appropriate C macro instead of open-coding
container_of() .
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: fill in or update documenting comments for transport
switch entry points.
For xprt_rdma_allocate:
The first paragraph is no longer true since commit 5a6d1db455
("SUNRPC: Add a transport-specific private field in rpc_rqst").
The second paragraph is no longer true since commit 54cbd6b0c6
("xprtrdma: Delay DMA mapping Send and Receive buffers").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To show that a caller did attempt to allocate and post more Receive
buffers, the trace point in rpcrdma_post_recvs() should report when
rpcrdma_post_recvs() was invoked but no new Receive buffers were
posted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: rb_flags might be used for other things besides
RPCRDMA_BUF_F_EMPTY_SCQ, so initialize it in a generic spot
instead of in a send-completion-queue-related helper.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This is a trivial split into lookup and insert functions, no change in
behavior.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Avoid taking the global auth_domain_lock in most lookups of the auth domain
by adding an RCU protected lookup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Module removal is RCU safe by design, so we really have no need to
lock the 'authtab[]' array.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: This code was copied from xprtsock.c and
backchannel_rqst.c. For rpcrdma, the backchannel server runs
exclusively in process context, thus disabling bottom-halves is
unnecessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Replace the hashed memory address of the target rpcrdma_ep
with the server's IP address and port. The server address is more
useful in an administrative error message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Use a function name that is consistent with the RDMA core
API and with other consumers. Because this is a function that is
invoked from outside the rpcrdma.ko module, add an appropriate
documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently, when a connection is established, rpcrdma_conn_upcall
invokes rpcrdma_conn_func and then
wake_up_all(&ep->rep_connect_wait). The former wakes waiting RPCs,
but the connect worker is not done yet, and that leads to races,
double wakes, and difficulty understanding how this logic is
supposed to work.
Instead, collect all the "connection established" logic in the
connect worker (xprt_rdma_connect_worker). A disconnect worker is
retained to handle provider upcalls safely.
Fixes: 254f91e2fa ("xprtrdma: RPC/RDMA must invoke ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Eliminate the FALLTHROUGH into the default arm to make the
switch easier to understand.
Also, as long as I'm here, do not display the memory address of the
target rpcrdma_ep. A hashed memory address is of marginal use here.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Since commit 173b8f49b3 ("xprtrdma: Demote "connect" log messages")
there has been no need to initialize connstat to zero. In fact, in
this code path there's now no reason not to set rep_connected
directly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The convention throughout other parts of xprtrdma is to
name variables of type struct rpcrdma_xprt "r_xprt", not "xprt".
This convention enables the use of the name "xprt" for a "struct
rpc_xprt" type variable, as in other parts of the RPC client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Use a function name that is consistent with the RDMA core
API and with other consumers. Because this is a function that is
invoked from outside the rpcrdma.ko module, add an appropriate
documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The way connection-oriented transports report connect_time is wrong:
it's supposed to be in seconds, not in jiffies.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For TCP, the logic in xprt_connect_status is currently never invoked
to record a successful connection. Commit 2a4919919a ("SUNRPC:
Return EAGAIN instead of ENOTCONN when waking up xprt->pending")
changed the way TCP xprt's are awoken after a connect succeeds.
Instead, change connection-oriented transports to bump connect_count
and compute connect_time the moment that XPRT_CONNECTED is set.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up the names of trace events related to MRs so that it's
easy to enable these with a glob.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When a memory operation fails, the MR's driver state might not match
its hardware state. The only reliable recourse is to dereg the MR.
This is done in ->ro_recover_mr, which then attempts to allocate a
fresh MR to replace the released MR.
Since commit e2ac236c0b ("xprtrdma: Allocate MRs on demand"),
xprtrdma dynamically allocates MRs. It can add more MRs whenever
they are needed.
That makes it possible to simply release an MR when a memory
operation fails, instead of "recovering" it. It will automatically
be replaced by the on-demand MR allocator.
This commit is a little larger than I wanted, but it replaces
->ro_recover_mr, rb_recovery_lock, rb_recovery_worker, and the
rb_stale_mrs list with a generic work queue.
Since MRs are no longer orphaned, the mrs_orphaned metric is no
longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some devices require more than 3 MRs to build a single 1MB I/O.
Ensure that rpcrdma_mrs_create() will add enough MRs to build that
I/O.
In a subsequent patch I'm changing the MR recovery logic to just
toss out the MRs. In that case it's possible for ->send_request to
loop acquiring some MRs, not getting enough, getting called again,
recycling the previous MRs, then not getting enough, lather rinse
repeat. Thus first we need to ensure enough MRs are created to
prevent that loop.
I'm "reusing" ia->ri_max_segs. All of its accessors seem to want the
maximum number of data segments plus two, so I'm going to bake that
into the initial calculation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
On a fresh connection, an RPC/RDMA client is supposed to send only
one RPC Call until it gets a credit grant in the first RPC Reply
from the server [RFC 8166, Section 3.3.3].
There is a bug in the Linux client's credit accounting mechanism
introduced by commit e7ce710a88 ("xprtrdma: Avoid deadlock when
credit window is reset"). On connect, it simply dumps all pending
RPC Calls onto the new connection.
Servers have been tolerant of this bad behavior. Currently no server
implementation ever changes its credit grant over reconnects, and
servers always repost enough Receives before connections are fully
established.
To correct this issue, ensure that the client resets both the credit
grant _and_ the congestion window when handling a reconnect.
Fixes: e7ce710a88 ("xprtrdma: Avoid deadlock when credit ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit ce7c252a8c ("SUNRPC: Add a separate spinlock to
protect the RPC request receive list") the RPC/RDMA reply handler
has been calling xprt_release_rqst_cong without holding
xprt->transport_lock.
I think the only way this call is ever made is if the credit grant
increases and there are RPCs pending. Current server implementations
do not change their credit grant during operation (except at
connect time).
Commit e7ce710a88 ("xprtrdma: Avoid deadlock when credit window is
reset") added the ->release_rqst call because UDP invokes
xprt_adjust_cwnd(), which calls __xprt_put_cong() after adjusting
xprt->cwnd. Both xprt_release() and ->xprt_release_xprt already wake
another task in this case, so it is safe to remove this call from
the reply handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Module removal is RCU safe by design, so we really have no need to
lock the auth_flavors[] array. Substitute a lockless scheme to
add/remove entries in the array, and then use rcu.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a bvec array to struct xdr_buf, and have the client allocate it
when we need to receive data into pages.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the RPC call relies on the receive call allocating pages as buffers,
then let's label it so that we
a) Don't leak memory by allocating pages for requests that do not expect
this behaviour
b) Can optimise for the common case where calls do not require allocation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We no longer need priority semantics on the xprt->sending queue, because
the order in which tasks are sent is now dictated by their position in
the send queue.
Note that the backlog queue remains a priority queue, meaning that
slot resources are still managed in order of task priority.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix up the priority queue to not batch by owner, but by queue, so that
we allow '1 << priority' elements to be dequeued before switching to
the next priority queue.
The owner field is still used to wake up requests in round robin order
by owner to avoid single processes hogging the RPC layer by loading the
queues.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the server is slow, we can find ourselves with quite a lot of entries
on the receive queue. Converting the search from an O(n) to O(log(n))
can make a significant difference, particularly since we have to hold
a number of locks while searching.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Treat socket write space handling in the same way we now treat transport
congestion: by denying the XPRT_LOCK until the transport signals that it
has free buffer space.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The theory was that we would need to grab the socket lock anyway, so we
might as well use it to gate the allocation of RPC slots for a TCP
socket.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Rather than forcing each and every RPC task to grab the socket write
lock in order to send itself, we allow whichever task is holding the
write lock to attempt to drain the entire transmit queue.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Avoid memory starvation by giving RPCs that are tagged with the
RPC_TASK_SWAPPER flag the highest priority.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Both RDMA and UDP transports require the request to get a "congestion control"
credit before they can be transmitted. Right now, this is done when
the request locks the socket. We'd like it to happen when a request attempts
to be transmitted for the first time.
In order to support retransmission of requests that already hold such
credits, we also want to ensure that they get queued first, so that we
don't deadlock with requests that have yet to obtain a credit.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
One of the intentions with the priority queues was to ensure that no
single process can hog the transport. The field task->tk_owner therefore
identifies the RPC call's origin, and is intended to allow the RPC layer
to organise queues for fairness.
This commit therefore modifies the transmit queue to group requests
by task->tk_owner, and ensures that we round robin among those groups.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Remove the checks for whether or not we need to transmit, and whether
or not a reply has been received. Those are already handled in
call_transmit() itself.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When we shift to using the transmit queue, then the task that holds the
write lock will not necessarily be the same as the one being transmitted.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix up the back channel code to recognise that it has already been
transmitted, so does not need to be called again.
Also ensure that we set req->rq_task.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When storing a struct rpc_rqst on the slot allocation list, we currently
use the same field 'rq_list' as we use to store the request on the
receive queue. Since the structure is never on both lists at the same
time, this is OK.
However, for clarity, let's make that a union with different names for
the different lists so that we can more easily distinguish between
the two states.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Allow the caller in clnt.c to call into the code to wait for a reply
after calling xprt_transmit(). Again, the reason is that the backchannel
code does not need this functionality.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Separate out the action of adding a request to the reply queue so that the
backchannel code can simply skip calling it altogether.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Rather than waking up the entire queue of RPC messages a second time,
just wake up the task that was put to sleep.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When asked to wake up an RPC task, it makes sense to test whether or not
the task is still queued.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a helper that will wake up a task that is sleeping on a specific
queue, and will set the value of task->tk_status. This is mainly
intended for use by the transport layer to notify the task of an
error condition.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the previous message was only partially transmitted, we need to close
the socket in order to avoid corruption of the message stream. To do so,
we currently hijack the unlocking of the socket in order to schedule
the close.
Now that we track the message offset in the socket state, we can move
that kind of checking out of the socket lock code, which is needed to
allow messages to remain queued after dropping the socket lock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Rather than resetting state variables in socket state_change() callback,
do it in the sunrpc TCP connect function itself.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Since we will want to introduce similar TCP state variables for the
transmission of requests, let's rename the existing ones to label
that they are for the receive side.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently, we grab the socket bit lock before we allow the message
to be XDR encoded. That significantly slows down the transmission
rate, since we serialise on a potentially blocking operation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a message has been encoded using RPCSEC_GSS, the server is
maintaining a window of sequence numbers that it considers valid.
The client should normally be tracking that window, and needs to
verify that the sequence number used by the message being transmitted
still lies inside the window of validity.
So far, we've been able to assume this condition would be realised
automatically, since the client has been encoding the message only
after taking the socket lock. Once we change that condition, we
will need the explicit check.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable bufixes:
- v3.17+: Fix an off-by-one in bl_map_stripe()
- v4.9+: NFSv4 client live hangs after live data migration recovery
- v4.18+: xprtrdma: Fix disconnect regression
- v4.14+: Fix locking in pnfs_generic_recover_commit_reqs
- v4.9+: Fix a sleep in atomic context in nfs4_callback_sequence()
Features:
- Add support for asynchronous server-side COPY operations
Other bugfixes and cleanups:
- Optitmizations and fixes involving NFS v4.1 / pNFS layout handling
- Optimize lseek(fd, SEEK_CUR, 0) on directories to avoid locking
- Immediately reschedule writeback when the server replies with an error
- Fix excessive attribute revalidation in nfs_execute_ok()
- Add error checking to nfs_idmap_prepare_message()
- Use new vm_fault_t return type
- Return a delegation when reclaiming one that the server has recalled
- Referrals should inherit proto setting from parents
- Make rpc_auth_create_args a const
- Improvements to rpc_iostats tracking
- Fix a potential reference leak when there is an error processing a callback
- Fix rmdir / mkdir / rename nlink accounting
- Fix updating inode change attribute
- Fix error handling in nfsn4_sp4_select_mode()
- Use an appropriate work queue for direct-write completion
- Don't busy wait if NFSv4 session draining is interrupted
-----BEGIN PGP SIGNATURE-----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=8+9t
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"These patches include adding async support for the v4.2 COPY
operation. I think Bruce is planning to send the server patches for
the next release, but I figured we could get the client side out of
the way now since it's been in my tree for a while. This shouldn't
cause any problems, since the server will still respond with
synchronous copies even if the client requests async.
Features:
- Add support for asynchronous server-side COPY operations
Stable bufixes:
- Fix an off-by-one in bl_map_stripe() (v3.17+)
- NFSv4 client live hangs after live data migration recovery (v4.9+)
- xprtrdma: Fix disconnect regression (v4.18+)
- Fix locking in pnfs_generic_recover_commit_reqs (v4.14+)
- Fix a sleep in atomic context in nfs4_callback_sequence() (v4.9+)
Other bugfixes and cleanups:
- Optimizations and fixes involving NFS v4.1 / pNFS layout handling
- Optimize lseek(fd, SEEK_CUR, 0) on directories to avoid locking
- Immediately reschedule writeback when the server replies with an
error
- Fix excessive attribute revalidation in nfs_execute_ok()
- Add error checking to nfs_idmap_prepare_message()
- Use new vm_fault_t return type
- Return a delegation when reclaiming one that the server has
recalled
- Referrals should inherit proto setting from parents
- Make rpc_auth_create_args a const
- Improvements to rpc_iostats tracking
- Fix a potential reference leak when there is an error processing a
callback
- Fix rmdir / mkdir / rename nlink accounting
- Fix updating inode change attribute
- Fix error handling in nfsn4_sp4_select_mode()
- Use an appropriate work queue for direct-write completion
- Don't busy wait if NFSv4 session draining is interrupted"
* tag 'nfs-for-4.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (54 commits)
pNFS: Remove unwanted optimisation of layoutget
pNFS/flexfiles: ff_layout_pg_init_read should exit on error
pNFS: Treat RECALLCONFLICT like DELAY...
pNFS: When updating the stateid in layoutreturn, also update the recall range
NFSv4: Fix a sleep in atomic context in nfs4_callback_sequence()
NFSv4: Fix locking in pnfs_generic_recover_commit_reqs
NFSv4: Fix a typo in nfs4_init_channel_attrs()
NFSv4: Don't busy wait if NFSv4 session draining is interrupted
NFS recover from destination server reboot for copies
NFS add a simple sync nfs4_proc_commit after async COPY
NFS handle COPY ERR_OFFLOAD_NO_REQS
NFS send OFFLOAD_CANCEL when COPY killed
NFS export nfs4_async_handle_error
NFS handle COPY reply CB_OFFLOAD call race
NFS add support for asynchronous COPY
NFS COPY xdr handle async reply
NFS OFFLOAD_CANCEL xdr
NFS CB_OFFLOAD xdr
NFS: Use an appropriate work queue for direct-write completion
NFSv4: Fix error handling in nfs4_sp4_select_mode()
...
missing Chuck's fixes for the problem with callbacks over GSS from
multi-homed servers, and a smaller fix from Laura Abbott.
-----BEGIN PGP SIGNATURE-----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=JnLK
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.19-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Chuck Lever fixed a problem with NFSv4.0 callbacks over GSS from
multi-homed servers.
The only new feature is a minor bit of protocol (change_attr_type)
which the client doesn't even use yet.
Other than that, various bugfixes and cleanup"
* tag 'nfsd-4.19-1' of git://linux-nfs.org/~bfields/linux: (27 commits)
sunrpc: Add comment defining gssd upcall API keywords
nfsd: Remove callback_cred
nfsd: Use correct credential for NFSv4.0 callback with GSS
sunrpc: Extract target name into svc_cred
sunrpc: Enable the kernel to specify the hostname part of service principals
sunrpc: Don't use stack buffer with scatterlist
rpc: remove unneeded variable 'ret' in rdma_listen_handler
nfsd: use true and false for boolean values
nfsd: constify write_op[]
fs/nfsd: Delete invalid assignment statements in nfsd4_decode_exchange_id
NFSD: Handle full-length symlinks
NFSD: Refactor the generic write vector fill helper
svcrdma: Clean up Read chunk path
svcrdma: Avoid releasing a page in svc_xprt_release()
nfsd: Mark expected switch fall-through
sunrpc: remove redundant variables 'checksumlen','blocksize' and 'data'
nfsd: fix leaked file lock with nfs exported overlayfs
nfsd: don't advertise a SCSI layout for an unsupported request_queue
nfsd: fix corrupted reply to badly ordered compound
nfsd: clarify check_op_ordering
...
During review, it was found that the target, service, and srchost
keywords are easily conflated. Add an explainer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv4.0 callback needs to know the GSS target name the client used
when it established its lease. That information is available from
the GSS context created by gssproxy. Make it available in each
svc_cred.
Note this will also give us access to the real target service
principal name (which is typically "nfs", but spec does not require
that).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A multi-homed NFS server may have more than one "nfs" key in its
keytab. Enable the kernel to pick the key it wants as a machine
credential when establishing a GSS context.
This is useful for GSS-protected NFSv4.0 callbacks, which are
required by RFC 7530 S3.3.3 to use the same principal as the service
principal the client used when establishing its lease.
A complementary modification to rpc.gssd is required to fully enable
this feature.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
rdma.git merge resolution for the 4.19 merge window
Conflicts:
drivers/infiniband/core/rdma_core.c
- Use the rdma code and revise with the new spelling for
atomic_fetch_add_unless
drivers/nvme/host/rdma.c
- Replace max_sge with max_send_sge in new blk code
drivers/nvme/target/rdma.c
- Use the blk code and revise to use NULL for ib_post_recv when
appropriate
- Replace max_sge with max_recv_sge in new blk code
net/rds/ib_send.c
- Use the net code and revise to use NULL for ib_post_recv when
appropriate
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltwm2geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGITkH/iSzkVhT2OxHoir0
mLVzTi7/Z17L0e/ELl7TvAC0iLFlWZKdlGR0g3b4/QpXLPmNK4HxiDRTQuWn8ke0
qDZyDq89HqLt+mpeFZ43PCd9oqV8CH2xxK3iCWReqv6bNnowGnRpSStlks4rDqWn
zURC/5sUh7TzEG4s997RrrpnyPeQWUlf/Mhtzg2/WvK2btoLWgu5qzjX1uFh3s7u
vaF2NXVJ3X03gPktyxZzwtO1SwLFS1jhwUXWBZ5AnoJ99ywkghQnkqS/2YpekNTm
wFk80/78sU+d91aAqO8kkhHj8VRrd+9SGnZ4mB2aZHwjZjGcics4RRtxukSfOQ+6
L47IdXo=
=sJkt
-----END PGP SIGNATURE-----
Merge tag 'v4.18' into rdma.git for-next
Resolve merge conflicts from the -rc cycle against the rdma.git tree:
Conflicts:
drivers/infiniband/core/uverbs_cmd.c
- New ifs added to ib_uverbs_ex_create_flow in -rc and for-next
- Merge removal of file->ucontext in for-next with new code in -rc
drivers/infiniband/core/uverbs_main.c
- for-next removed code from ib_uverbs_write() that was modified
in for-rc
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
