Commit Graph

60450 Commits

Author SHA1 Message Date
Tanmay Upadhyay
4c22ea8f44 ARM: pxa168/gplugd: free correct GPIO
Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11 10:10:43 +08:00
Tanmay Upadhyay
3647a40f36 ARM: pxa168/gplugd: get rid of mfp-gplugd.h
Move definitions from mfp-gplugd.h to mfp-pxa168.h as they aren't
gplugD specific.

Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11 10:10:43 +08:00
Lennert Buytenhek
392ba787bc ARM: pxa: fix logic error in PJ4 iWMMXt handling
This got added in:

	commit ef6c84454f
	Author: Haojian Zhuang <haojian.zhuang@marvell.com>
	Date:   Wed Nov 24 11:54:25 2010 +0800

	    ARM: pxa: add iwmmx support for PJ4

which does:

-       mrc     p15, 0, r2, c15, c1, 0
-       orr     r2, r2, #0x3                    @ enable access to CP0 and CP1
-       mcr     p15, 0, r2, c15, c1, 0
+       @ enable access to CP0 and CP1
+       XSC(mrc p15, 0, r2, c15, c1, 0)
+       XSC(orr r2, r2, #0x3)
+       XSC(mcr p15, 0, r2, c15, c1, 0)

but then later does:

-       mrc     p15, 0, r4, c15, c1, 0
-       orr     r4, r4, #0x3                    @ enable access to CP0 and CP1
-       mcr     p15, 0, r4, c15, c1, 0
+       @ enable access to CP0 and CP1
+       XSC(mrc p15, 0, r4, c15, c1, 0)
+       XSC(orr r4, r4, #0xf)
+       XSC(mcr p15, 0, r4, c15, c1, 0)

Signed-off-by: Lennert Buytenhek <buytenh@laptop.org>
Acked-by Haojian <haojian.zhuang@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11 10:10:26 +08:00
Linus Torvalds
068ef73912 Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: drop experimental status for ARM_PATCH_PHYS_VIRT
  ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correct
  ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned access model
  ARM: 7010/1: mm: fix invalid loop for poison_init_mem
  ARM: 7005/1: freshen up mm/proc-arm946.S
  dmaengine: PL08x: Fix trivial build error
  ARM: Fix build error for SMP=n builds
2011-08-10 17:37:17 -07:00
Andy Lutomirski
3ae36655b9 x86-64: Rework vsyscall emulation and add vsyscall= parameter
There are three choices:

vsyscall=native: Vsyscalls are native code that issues the
corresponding syscalls.

vsyscall=emulate (default): Vsyscalls are emulated by instruction
fault traps, tested in the bad_area path.  The actual contents of
the vsyscall page is the same as the vsyscall=native case except
that it's marked NX.  This way programs that make assumptions about
what the code in the page does will not be confused when they read
that code.

vsyscall=none: Trying to execute a vsyscall will segfault.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/8449fb3abf89851fd6b2260972666a6f82542284.1312988155.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10 19:26:46 -05:00
Andy Lutomirski
fce8dc0642 x86-64: Wire up getcpu syscall
getcpu is available as a vdso entry and an emulated vsyscall.
Programs that for some reason don't want to use the vdso should
still be able to call getcpu without relying on the slow emulated
vsyscall.  It costs almost nothing to expose it as a real syscall.

We also need this for the following patch in vsyscall=native mode.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/6b19f55bdb06a0c32c2fa6dba9b6f222e1fde999.1312988155.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10 19:26:46 -05:00
Andy Lutomirski
f3fb5b7bb7 x86: Remove unnecessary compile flag tweaks for vsyscall code
As of commit 98d0ac38ca
Author: Andy Lutomirski <luto@mit.edu>
Date:   Thu Jul 14 06:47:22 2011 -0400

    x86-64: Move vread_tsc and vread_hpet into the vDSO

user code no longer directly calls into code in arch/x86/kernel/, so
we don't need compile flag hacks to make it safe.  All vdso code is
in the vdso directory now.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/835cd05a4c7740544d09723d6ba48f4406f9826c.1312988155.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10 18:55:29 -05:00
Linus Torvalds
a0c49b6b67 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Really fix build without CONFIG_PCI
  powerpc: Fix build without CONFIG_PCI
  powerpc/4xx: Fix build of PCI code on 405
  powerpc/pseries: Simplify vpa deregistration functions
  powerpc/pseries: Cleanup VPA registration and deregistration errors
  powerpc/pseries: Fix kexec on recent firmware versions
  MAINTAINERS: change maintainership of mpc5xxx
  powerpc: Make KVM_GUEST default to n
  powerpc/kvm: Fix build errors with older toolchains
  powerpc: Lack of ibm,io-events not that important!
  powerpc: Move kdump default base address to half RMO size on 64bit
  powerpc/perf: Disable pagefaults during callchain stack read
  ppc: Remove duplicate definition of PV_POWER7
  powerpc: pseries: Fix kexec on machines with more than 4TB of RAM
  powerpc: Jump label misalignment causes oops at boot
  powerpc: Clean up some panic messages in prom_init
  powerpc: Fix device tree claim code
  powerpc: Return the_cpu_ spec from identify_cpu
  powerpc: mtspr/mtmsr should take an unsigned long
2011-08-10 12:36:45 -07:00
Linus Walleij
ac9cf9ff4f mach-sa1100: fix PCI build problem
The PCI nanoengine driver in the SA1100 machine probably has not
been building for some time. It probably dragged hardware.h
in implicitly and now it doesn't anymore. After this an SA1100
build selecting all system variants will build successfully.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-10 16:00:48 +00:00
Benjamin Herrenschmidt
a85fe3fce8 powerpc: Really fix build without CONFIG_PCI
Brown paper bag day, previous commit wouldn't work very well with modules
enabled. Move the exports into the ifdef.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-11 01:15:44 +10:00
Hemant Pedanekar
e9d0b97eef omap: timer: Set dmtimer used as clocksource in autoreload mode
If CONFIG_OMAP_32K_TIMER is not selected and dmtimer is used as clocksource, the
timer stops counting once overflow occurs as it was not set in autoreload mode.
This results into timekeeping failure: for example, 'sleep 1' at the shell after
the timer counter overflow would hang.

This patch sets up autoreload when starting the clocksource timer which fixes
the above issue.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10 07:36:45 -07:00
Johan Hovold
133e6b55b1 OMAP3: am3517crane: remove NULL board_mux from board file
Since 7203f8a48b (arm: mach-omap2: remove
NULL board_mux from board files) NULL board_mux is defined in mux.h.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10 04:54:48 -07:00
Thomas Meyer
dccb3b0eb6 arm: mach-omap2: mux: use kstrdup()
Use kstrdup rather than duplicating its implementation

The semantic patch that makes this output is available
in scripts/coccinelle/api/kstrdup.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10 04:53:28 -07:00
Maxin John
ae65eb729d arch:arm:plat-omap:iovmm: remove unused variable 'va'
The pointer "va" returned from "phys_to_virt(pa)" is never used in
"sgtable_fill_kmalloc()".So,it is safe to remove this set-but-unused variable.

Signed-off-by: Maxin B. John <maxin.john@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10 04:17:16 -07:00
Oleg Drokin
1d08fd9f6a Update Nook Color machine 3284 to common Encore name
Machine database already updated:
http://www.arm.linux.org.uk/developer/machines/list.php?id=3284

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10 03:41:05 -07:00
Raphaël Assénat
5686c4f825 am3505/3517: Various platform defines for UART4
Add missing definitions for the AM3505/3517 UART4 such
as DMAs, INTs and base address.

Signed-of-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10 03:38:07 -07:00
Tony Lindgren
58cf5e7fd5 Merge branch 'for_3.1/pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into fixes 2011-08-10 03:36:42 -07:00
Russell King
4eb979d4d1 ARM: drop experimental status for ARM_PATCH_PHYS_VIRT
This has now been well tested, and several platforms are now selecting
this directly.  It's time to drop its experimental status.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-10 10:33:29 +01:00
Paul Walmsley
c9a48c2aac OMAP: hwmod: fix build break on non-OMAP4 multi-OMAP2 builds
Builds for multi-OMAP2 (e.g., OMAP2420 with OMAP2430) with
CONFIG_ARCH_OMAP4=n fail with the following errors:

arch/arm/mach-omap2/built-in.o: In function `_enable_module':
arch/arm/mach-omap2/omap_hwmod.c:701: undefined reference to `omap4_cminst_module_enable'
arch/arm/mach-omap2/built-in.o: In function `_disable_module':
arch/arm/mach-omap2/omap_hwmod.c:726: undefined reference to `omap4_cminst_module_disable'
arch/arm/mach-omap2/built-in.o: In function `_wait_target_disable':
arch/arm/mach-omap2/omap_hwmod.c:1179: undefined reference to `omap4_cminst_wait_module_idle'

This is probably due to the preprocessor directives in
arch/arm/plat-omap/include/plat/cpu.h that convert some cpu_is_omap*()
expressions from preprocessor directives into something that is only
resolvable during runtime, if multiple OMAP2 build targets are
selected.

Thanks to Tony Lindgren <tony@atomide.com> for reporting.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10 02:20:43 -07:00
Peter Ujfalusi
d12d1fcafa OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds
Commit b22f954 (OMAP4: Move common twl6030 configuration to twl-common)
caused compile failures for code for OMAP arch which is not selected by
the config.

Fixes issues like:
With CONFIG_ARCH_OMAP3=y and CONFIG_ARCH_OMAP4=n, I'm getting this:

arch/arm/mach-omap2/built-in.o:(.data+0xf99c): undefined reference to `omap4430_phy_init'
arch/arm/mach-omap2/built-in.o:(.data+0xf9a0): undefined reference to `omap4430_phy_exit'
arch/arm/mach-omap2/built-in.o:(.data+0xf9a4): undefined reference to `omap4430_phy_power'
arch/arm/mach-omap2/built-in.o:(.data+0xf9a8): undefined reference to `omap4430_phy_set_clk'
arch/arm/mach-omap2/built-in.o:(.data+0xf9ac): undefined reference to `omap4430_phy_suspend'

Fix the problem by moving the code to ifdef sections for omap3 and omap4.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10 02:09:19 -07:00
Tony Luck
88ff987758 [IA64] fix "allnoconfig" build
Link errors:
arch/ia64/kernel/built-in.o: In function `arch_setup_dmar_msi':
(.text+0x35972): undefined reference to `dmar_msi_write'
... and more ...

because allnoconfig has CONFIG_DMAR=y due to the "select DMAR"
in arch/ia64/Kconfig under config IA64_GENERIC.

Drop that select, but add CONFIG_DMAR=y to generic_defconfig so
we keep testbuilding the DMAR code.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-08-09 12:36:00 -07:00
Youquan Song
a34668f6be perf, x86: Add model 45 SandyBridge support
Add support to Romely-EP SandyBridge.

Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Anhua Xu <anhua.xu@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312264895-2010-1-git-send-email-youquan.song@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-09 11:58:06 +02:00
Dave Martin
2102a65e69 ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correct
With the UM_SIGNAL alignment fault mode, no siginfo structure is
passed to userspace.

POSIX specifies how siginfo_t should be populated for alignment
faults, so this patch does just that:

  * si_signo = SIGBUS
  * si_code = BUS_ADRALN
  * si_addr = misaligned data address at which access was attempted

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-09 08:42:39 +01:00
Dave Martin
088c01f1e3 ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned access model
Currently, it's possible to set the kernel to ignore alignment
faults when changing the alignment fault handling mode at runtime
via /proc/sys/alignment, even though this is undesirable on ARMv6
and above, where it can result in infinite spins where an un-fixed-
up instruction repeatedly faults.

In addition, the kernel clobbers any alignment mode specified on
the command-line if running on ARMv6 or above.

This patch factors out the necessary safety check into a couple of
new helper functions, and checks and modifies the fault handling
mode as appropriate on boot and on writes to /proc/cpu/alignment.

Prior to ARMv6, the behaviour is unchanged.

For ARMv6 and above, the behaviour changes as follows:

  * Attempting to ignore faults on ARMv6 results in the mode being
    forced to UM_FIXUP instead.  A warning is printed if this
    happened as a result of a write to /proc/cpu/alignment.  The
    user's UM_WARN bit (if present) is still honoured.

  * An alignment= argument from the kernel command-line is now
    honoured, except that the kernel will modify the specified mode
    as described above.  This is allows modes such as UM_SIGNAL and
    UM_WARN to be active immediately from boot, which is useful for
    debugging purposes.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-09 08:42:39 +01:00
Jamie Iles
bf912d99e9 ARM: 7010/1: mm: fix invalid loop for poison_init_mem
poison_init_mem() used a loop of:

	while ((count = count - 4))

which has 2 problems - an off by one error so that we do one less word
than we should, and the other is that if count == 0 then we loop forever
and poison too much.  On a platform with HAVE_TCM=y but nothing in the
TCM's, this caused corruption and the platform failed to boot.

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-09 08:42:38 +01:00
Brian S. Julin
7760d54600 ARM: 7005/1: freshen up mm/proc-arm946.S
The file mm/proc-arm946.S contains a typo and is missing a structure
member in __arm946_proc_info.  The former prevents compilation
and the latter causes problems during boot.  It is likely this
file was manually copied from a similar file and not tested, then
later updates to the *_proc_info structures missed this file.

This patch will apply (with offset) with or without the
recent macro unification work that has been done in this directory.
This was verified against linux-next/stable last week.

See arm-linux-kernel thread:
http://lists.arm.linux.org.uk/lurker/message/20110718.103237.0106d468.en.html

Signed-off-by: Brian S. Julin <bri@abrij.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-09 08:42:38 +01:00
Arnaud Patard (Rtp)
d9c927833a iMX: Fix build for iMX53
Commit fad107086d fixed the wrong test for MX51
as the MX51 addresses are wrong for MX50 and MX53 but now it's MX51 only,
UART_PADDR is not defined anymore when building for MX50/MX53.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Tested-by: Steev Klimaszewski <steev@genesi-usa.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-08 08:38:45 +02:00
Ben Dooks
546fb6cbde ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage
irq_to_gpio() is being called on a GPIO so change to using
gpio_to_irq() instead.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-08 08:24:16 +02:00
Sascha Hauer
1a43f20124 Merge commit 'v3.1-rc1' into imx-fixes 2011-08-08 08:22:41 +02:00
Mark Brown
a9ba615134 ASoC: Rename WM8915 to WM8996
For marketing reasons the part will be called WM8996. In order to avoid
user confusion rename the driver to reflect this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-08 14:30:37 +09:00
Linus Torvalds
9e23311345 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix build with DEBUG_PAGEALLOC enabled.
2011-08-07 15:52:19 -07:00
Linus Torvalds
f23c126bfa arm: remove stale export of 'sha_transform'
The generic library code already exports the generic function, this was
left-over from the ARM-specific version that just got removed.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07 15:49:11 -07:00
Linus Torvalds
4d4487140d arm: remove "optimized" SHA1 routines
Since commit 1eb19a12bd ("lib/sha1: use the git implementation of
SHA-1"), the ARM SHA1 routines no longer work.  The reason? They
depended on the larger 320-byte workspace, and now the sha1 workspace is
just 16 words (64 bytes).  So the assembly version would overwrite the
stack randomly.

The optimized asm version is also probably slower than the new improved
C version, so there's no reason to keep it around.  At least that was
the case in git, where what appears to be the same assembly language
version was removed two years ago because the optimized C BLK_SHA1 code
was faster.

Reported-and-tested-by: Joachim Eastwood <manabian@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07 14:07:03 -07:00
Linus Torvalds
45a05f9488 Merge branch 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set
  xen: Fix misleading WARN message at xen_release_chunk
  xen: Fix printk() format in xen/setup.c
  xen/tracing: it looks like we wanted CONFIG_FTRACE
  xen/self-balloon: Add dependency on tmem.
  xen/balloon: Fix compile errors - missing header files.
  xen/grant: Fix compile warning.
  xen/pciback: remove duplicated #include
2011-08-06 12:22:30 -07:00
David S. Miller
0785a8e87b sparc: Fix build with DEBUG_PAGEALLOC enabled.
arch/sparc/mm/init_64.c:1622:22: error: unused variable '__swapper_4m_tsb_phys_patch_end' [-Werror=unused-variable]
arch/sparc/mm/init_64.c:1621:22: error: unused variable '__swapper_4m_tsb_phys_patch' [-Werror=unused-variable]

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-06 05:26:35 -07:00
Jack Steiner
05e33fc20e x86, UV: Remove UV delay in starting slave cpus
Delete the 10 msec delay between the INIT and SIPI when starting
slave cpus. I can find no requirement for this delay. BIOS also
has similar code sequences without the delay.

Removing the delay reduces boot time by 40 sec. Every bit helps.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20110805140900.GA6774@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-05 23:48:34 +02:00
Paul Fox
a3ea14df0e x86, olpc: Wait for last byte of EC command to be accepted
When executing EC commands, only waiting when there are still
more bytes to write is usually fine. However, if the system
suspends very quickly after a call to olpc_ec_cmd(), the last
data byte may not yet be transferred to the EC, and the command
will not complete.

This solves a bug where the SCI wakeup mask was not correctly
written when going into suspend.

It means that sometimes, on XO-1.5 (but not XO-1), the
devices that were marked as wakeup sources can't wake up
the system. e.g. you ask for wifi wakeups, suspend, but then
incoming wifi frames don't wake up the system as they should.

Signed-off-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-05 23:47:55 +02:00
Colin Cross
98333b3dda OMAP2+: PM: SmartReflex: use put_sync_suspend for IRQ-safe disabling
omap_sr_disable_reset_volt is called with irqs off in omapx_enter_sleep,
as part of idle sequence, this eventually calls sr_disable and
pm_runtime_put_sync. pm_runtime_put_sync calls rpm_idle, which will
enable interrupts in order to call the callback. In this short interval
when interrupts are enabled, scenarios such as the following can occur:
while interrupts are enabled, the timer interrupt that is supposed to
wake the device out of idle occurs and is acked, so when the CPU finally
goes to off, the timer is already gone, missing a wakeup event.

Further, as the documentation for runtime states:"
 However, subsystems can use the pm_runtime_irq_safe() helper function
 to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume()
 callbacks should be invoked in atomic context with interrupts disabled
 (->runtime_idle() is still invoked the default way)."

Hence, replace pm_runtime_put_sync with pm_runtime_put_sync_suspend
to invoke the suspend handler and shut off the fclk for SmartReflex
module instead of using the idle handler in interrupt disabled context.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Colin Cross <ccross@google.com>
[khilman@ti.com: minor Subject edits]
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-05 11:54:59 -07:00
Kevin Hilman
8c7f65943d OMAP3: beagle: don't touch omap_device internals
Board code should not touch omap_device internals.  To get the MPU/IVA devices,
use existing APIs: omap2_get_mpu_device(), omap2_get_iva_device().

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-05 11:54:58 -07:00
Kevin Hilman
b66a4026d4 OMAP1: enable GENERIC_IRQ_CHIP
OMAP1 needs this also since GPIO driver (common for all OMAPs) is
being converted to use generic IRQ chip.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-05 11:54:56 -07:00
Nishanth Menon
e13d8f3839 OMAP3+: SR: ensure pm-runtime callbacks can be invoked with IRQs disabled
SmartReflex should be disabled while entering low power mode due to
a) SmartReflex values are not defined for retention voltage, further
b) with SmartReflex enabled, if CPU enters lower c-states, FSM will try
to bump the voltage to current OPP's voltage for which it has entered c-state;
hence SmartReflex needs to be disabled for MPU, CORE and IVA voltage
domains in idle path before enabling auto retention voltage achievement
on the device.

However, since the current pm_runtime setup for SmartReflex devices are
setup to allow callbacks to be invoked with interrupts enabled, calling
SmartReflex enable/disable from other contexts such as idle paths
where preemption is disabled causes warnings such as the following
indicating of a potential race.
[   82.023895] [<c04d079c>] (__irq_svc+0x3c/0x120) from [<c04d0484>] (_raw_spin_unlock_irq+0x28/0x2c)
[   82.023895] [<c04d0484>] (_raw_spin_unlock_irq+0x28/0x2c) from [<c0323234>] (rpm_callback+0x4c/0x68)
[   82.023956] [<c0323234>] (rpm_callback+0x4c/0x68) from [<c0323f7c>] (rpm_resume+0x338/0x53c)
[   82.023956] [<c0323f7c>] (rpm_resume+0x338/0x53c) from [<c03243f4>] (__pm_runtime_resume+0x48/0x60)
[   82.023986] [<c03243f4>] (__pm_runtime_resume+0x48/0x60) from [<c008aee0>] (sr_enable+0xa8/0x19c)
[   82.023986] [<c008aee0>] (sr_enable+0xa8/0x19c) from [<c008b2fc>] (omap_sr_enable+0x50/0x90)
[   82.024017] [<c008b2fc>] (omap_sr_enable+0x50/0x90) from [<c00888c0>] (omap4_enter_sleep+0x138/0x168)

Instead, we use pm_runtime_irq_safe to tell the PM core that callbacks can be
invoked in interrupt disabled contexts.

Acked-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
[khilman@ti.com: minor changelog edits]
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-05 11:54:55 -07:00
Kevin Hilman
44e51b2922 OMAP2+: Kconfig: don't select PM in OMAP2PLUS_TYPICAL
CONFIG_PM is no longer a user-selectable Kconfig option.  Rather it is
automatically enabled if either CONFIG_SUSPEND or CONFIG_RUNTIME_PM is
enabled, so having a 'select PM' here is redunant when 'select
CONFIG_PM_RUNTIME' is present.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-05 11:54:53 -07:00
Linus Torvalds
8cd290a07d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Size mondo queues more sanely.
  sparc: Access kernel TSB using physical addressing when possible.
  sparc: Fix __atomic_add_unless() return value.
  sparc: use kbuild-generic support for true asm-generic header files
  sparc: Use popc when possible for ffs/__ffs/ffz.
  sparc: Set reboot-cmd using reboot data hypervisor call if available.
  sparc: Add some missing hypervisor API groups.
  sparc: Use hweight64() in popc emulation.
  sparc: Use popc if possible for hweight routines.
  sparc: Minor tweaks to Niagara page copy/clear.
  sparc: Sanitize cpu feature detection and reporting.
2011-08-05 06:42:36 -10:00
Jason Liu
e1b96ada65 ARM: iMX5: Don't enable DPLL if it already enabled
If the DPLL is already enabled, don't try to enable it again.
Since write to the DPLL control register will make the DPLL
reset and which will cause some issues when some child module
are sourced from this DPLL.

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-05 18:10:19 +02:00
Konrad Rzeszutek Wilk
c00c8aa2d9 xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set
with CONFIG_XEN and CONFIG_FTRACE set we get this:

arch/x86/xen/trace.c:22: error: ‘__HYPERVISOR_console_io’ undeclared here (not in a function)
arch/x86/xen/trace.c:22: error: array index in initializer not of integer type
arch/x86/xen/trace.c:22: error: (near initialization for ‘xen_hypercall_names’)
arch/x86/xen/trace.c:23: error: ‘__HYPERVISOR_physdev_op_compat’ undeclared here (not in a function)

Issue was that the definitions of __HYPERVISOR were not pulled
if CONFIG_XEN_PRIVILEGED_GUEST was not set.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-05 09:43:02 -04:00
David S. Miller
961f65fc41 sparc: Size mondo queues more sanely.
There is currently no upper limit on the mondo queue sizes we'll use,
which guarentees that we'll eventually his page allocation limits, and
thus allocation failures, due to MAX_ORDER.

Cap the sizes sanely, current limits are:

CPU  MONDO	2 * max_possible_cpus
DEV  MONDO	256 (basically NR_IRQS)
RES  MONDO	128
NRES MONDO	4

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-05 02:38:27 -07:00
David S. Miller
9076d0e7e0 sparc: Access kernel TSB using physical addressing when possible.
On sun4v this is basically required since we point the hypervisor and
the TSB walking hardware at these tables using physical addressing
too.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-05 00:53:57 -07:00
Benjamin Herrenschmidt
81210c2062 powerpc: Fix build without CONFIG_PCI
Commit fea80311a9
"iomap: make IOPORT/PCI mapping functions conditional"

Broke powerpc build without CONFIG_PCI as we would still define
pci_iomap(), which overlaps with the new empty inline in the headers.

Make our implementation conditional on CONFIG_PCI

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 16:01:20 +10:00
Benjamin Herrenschmidt
883a805d61 powerpc/4xx: Fix build of PCI code on 405
Commit 112d1fe9f7
"powerpc/4xx: Add check_link to struct ppc4xx_pciex_hwops" inadvertently
broke 405 builds due to some functions being over protected by an
ifdef CONFIG_44x.

Move them back out.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 15:59:40 +10:00
Anton Blanchard
598c8231ab powerpc/pseries: Simplify vpa deregistration functions
The VPA, SLB shadow and DTL degistration functions do not need an
address, so simplify things and remove it.

Also cleanup pseries_kexec_cpu_down a bit by storing the cpu IDs
in local variables.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:58 +10:00
Anton Blanchard
711ef84e80 powerpc/pseries: Cleanup VPA registration and deregistration errors
Make the VPA, SLB shadow and DTL registration and deregistration
functions print consistent messages on error. I needed the firmware
error code while chasing a kexec bug but we weren't printing it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:57 +10:00
Anton Blanchard
b1301797f3 powerpc/pseries: Fix kexec on recent firmware versions
Recent versions of firmware will fail to unmap the virtual processor
area if we have a dispatch trace log registered. This causes kexec
to fail.

If a trace log is registered this patch unregisters it before the
SLB shadow and virtual processor areas, fixing the problem.

The address argument is ignored by firmware on unregister so we
may as well remove it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:57 +10:00
Anton Blanchard
643ba4e307 powerpc: Make KVM_GUEST default to n
KVM_GUEST adds a 1 MB array to the kernel (kvm_tmp) which grew
my kernel enough to cause it to fail to boot.

Dynamically allocating or reducing the size of this array is a
good idea, but in the meantime I think it makes sense to make
KVM_GUEST default to n in order to minimise surprises.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:57 +10:00
Nishanth Aravamudan
2c740c5841 powerpc/kvm: Fix build errors with older toolchains
On a box with gcc 4.3.2, I see errors like:

arch/powerpc/kvm/book3s_hv_rmhandlers.S:1254: Error: Unrecognized opcode: stxvd2x
arch/powerpc/kvm/book3s_hv_rmhandlers.S:1316: Error: Unrecognized opcode: lxvd2x

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:56 +10:00
Anton Blanchard
53876e387d powerpc: Lack of ibm,io-events not that important!
The ibm,io-events code is a bit verbose with its error messages.
Reverse the reporting so we only print when we successfully enable
I/O event interrupts.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:56 +10:00
Anton Blanchard
8aa6d35929 powerpc: Move kdump default base address to half RMO size on 64bit
We are seeing boot failures on some very large boxes even with
commit b5416ca9f8 (powerpc: Move kdump default base address to
64MB on 64bit).

This patch halves the RMO so both kernels get about the same
amount of RMO memory. On large machines this region will be
at least 256MB, so each kernel will get 128MB.

We cap it at 256MB (small SLB size) since some early allocations need
to be in the bolted SLB region. We could relax this on machines with
1TB SLBs in a future patch.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:56 +10:00
David Ahern
b59a1bfcc2 powerpc/perf: Disable pagefaults during callchain stack read
Panic observed on an older kernel when collecting call chains for
the context-switch software event:

 [<b0180e00>]rb_erase+0x1b4/0x3e8
 [<b00430f4>]__dequeue_entity+0x50/0xe8
 [<b0043304>]set_next_entity+0x178/0x1bc
 [<b0043440>]pick_next_task_fair+0xb0/0x118
 [<b02ada80>]schedule+0x500/0x614
 [<b02afaa8>]rwsem_down_failed_common+0xf0/0x264
 [<b02afca0>]rwsem_down_read_failed+0x34/0x54
 [<b02aed4c>]down_read+0x3c/0x54
 [<b0023b58>]do_page_fault+0x114/0x5e8
 [<b001e350>]handle_page_fault+0xc/0x80
 [<b0022dec>]perf_callchain+0x224/0x31c
 [<b009ba70>]perf_prepare_sample+0x240/0x2fc
 [<b009d760>]__perf_event_overflow+0x280/0x398
 [<b009d914>]perf_swevent_overflow+0x9c/0x10c
 [<b009db54>]perf_swevent_ctx_event+0x1d0/0x230
 [<b009dc38>]do_perf_sw_event+0x84/0xe4
 [<b009dde8>]perf_sw_event_context_switch+0x150/0x1b4
 [<b009de90>]perf_event_task_sched_out+0x44/0x2d4
 [<b02ad840>]schedule+0x2c0/0x614
 [<b0047dc0>]__cond_resched+0x34/0x90
 [<b02adcc8>]_cond_resched+0x4c/0x68
 [<b00bccf8>]move_page_tables+0xb0/0x418
 [<b00d7ee0>]setup_arg_pages+0x184/0x2a0
 [<b0110914>]load_elf_binary+0x394/0x1208
 [<b00d6e28>]search_binary_handler+0xe0/0x2c4
 [<b00d834c>]do_execve+0x1bc/0x268
 [<b0015394>]sys_execve+0x84/0xc8
 [<b001df10>]ret_from_syscall+0x0/0x3c

A page fault occurred walking the callchain while creating a perf
sample for the context-switch event. To handle the page fault the
mmap_sem is needed, but it is currently held by setup_arg_pages.
(setup_arg_pages calls shift_arg_pages with the mmap_sem held.
shift_arg_pages then calls move_page_tables which has a cond_resched
at the top of its for loop - hitting that cond_resched is what caused
the context switch.)

This is an extension of Anton's proposed patch:
https://lkml.org/lkml/2011/7/24/151
adding case for 32-bit ppc.

Tested on the system that first generated the panic and then again
with latest kernel using a PPC VM. I am not able to test the 64-bit
path - I do not have H/W for it and 64-bit PPC VMs (qemu on Intel)
is horribly slow.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:56 +10:00
Peter Zijlstra
501d238633 ppc: Remove duplicate definition of PV_POWER7
One definition of PV_POWER7 seems enough to me.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:55 +10:00
Anton Blanchard
bed9a31527 powerpc: pseries: Fix kexec on machines with more than 4TB of RAM
On a box with 8TB of RAM the MMU hashtable is 64GB in size. That
means we have 4G PTEs. pSeries_lpar_hptab_clear was using a signed
int to store the index which will overflow at 2G.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:55 +10:00
Anton Blanchard
c113a3aee2 powerpc: Jump label misalignment causes oops at boot
I hit an oops at boot on the first instruction of timer_cpu_notify:

NIP [c000000000722f88] .timer_cpu_notify+0x0/0x388

The code should look like:

c000000000722f78:       eb e9 00 30     ld      r31,48(r9)
c000000000722f7c:       2f bf 00 00     cmpdi   cr7,r31,0
c000000000722f80:       40 9e ff 44     bne+    cr7,c000000000722ec4
c000000000722f84:       4b ff ff 74     b       c000000000722ef8

c000000000722f88 <.timer_cpu_notify>:
c000000000722f88:       7c 08 02 a6     mflr    r0
c000000000722f8c:       2f a4 00 07     cmpdi   cr7,r4,7
c000000000722f90:       fb c1 ff f0     std     r30,-16(r1)
c000000000722f94:       fb 61 ff d8     std     r27,-40(r1)

But the oops output shows:

eb61ffd8 eb81ffe0 eba1ffe8 ebc1fff0 7c0803a6 ebe1fff8 4e800020
00000000 ebe90030 c0000000 00ad0a28 00000000 2fa40007 fbc1fff0 fb61ffd8

So we scribbled over our instructions with c000000000ad0a28, which
is an address inside the jump_table ELF section.

It turns out the jump_table section is only aligned to 8 bytes but
we are aligning our entries within the section to 16 bytes. This
means our entries are offset from the table:

c000000000acd4a8 <__start___jump_table>:
        ...
c000000000ad0a10:       c0 00 00 00     lfs     f0,0(0)
c000000000ad0a14:       00 70 cd 5c     .long 0x70cd5c
c000000000ad0a18:       c0 00 00 00     lfs     f0,0(0)
c000000000ad0a1c:       00 70 cd 90     .long 0x70cd90
c000000000ad0a20:       c0 00 00 00     lfs     f0,0(0)
c000000000ad0a24:       00 ac a4 20     .long 0xaca420

And the jump table sort code gets very confused and writes into the
wrong spot. Remove the alignment, and also remove the padding since
we it saves some space and we shouldn't need it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:55 +10:00
Anton Blanchard
fbafd72815 powerpc: Clean up some panic messages in prom_init
Add a newline to the panic messages in make_room. Also fix a
comment that suggested our chunk size is 4Mb. It's 1MB.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:55 +10:00
Anton Blanchard
966728dd88 powerpc: Fix device tree claim code
I have a box that fails in OF during boot with:

DEFAULT CATCH!, exception-handler=fff00400
at   %SRR0: 49424d2c4c6f6768   %SRR1: 800000004000b002

ie "IBM,Logh". OF got corrupted with a device tree string.

Looking at make_room and alloc_up, we claim the first chunk (1 MB)
but we never claim any more. mem_end is always set to alloc_top
which is the top of our available address space, guaranteeing we will
never call alloc_up and claim more memory.

Also alloc_up wasn't setting alloc_bottom to the bottom of the
available address space.

This doesn't help the box to boot, but we at least fail with
an obvious error. We could relocate the device tree in a future
patch.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:54 +10:00
Scott Wood
26ee97672e powerpc: Return the_cpu_ spec from identify_cpu
Commit af9eef3c7b caused cpu_setup to see
the_cpu_spec, rather than the source struct.  However, on 32-bit, the
return value of identify_cpu was being used for feature fixups, and
identify_cpu was returning the source struct.  So if cpu_setup patches
the feature bits, the update won't affect the fixups.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:54 +10:00
Scott Wood
326ed6a9bc powerpc: mtspr/mtmsr should take an unsigned long
Add a cast in case the caller passes in a different type, as it would
if mtspr/mtmsr were functions.

Previously, if a 64-bit type was passed in on 32-bit, GCC would bind the
constraint to a pair of registers, and would substitute the first register
in the pair in the asm code.  This corresponds to the upper half of the
64-bit register, which is generally not the desired behavior.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:54 +10:00
Linus Torvalds
8b6b462812 Merge branch 'fixefi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'fixefi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  efi: Fix argument types for SetVariable() for ia64
2011-08-04 16:44:23 -10:00
David Brown
cbc158d6bf cpuidle: Consistent spelling of cpuidle_idle_call()
Commit a0bfa13738 mispells
cpuidle_idle_call() on ARM and SH code.  Fix this to be consistent.

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: x86@kernel.org
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
[ Also done by Mark Brown - th ebug has been around forever, and was
  noticed in -next, but the idle tree never picked it up. Bad bad bad ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-04 16:35:34 -10:00
Andy Lutomirski
c149a665ac x86-64: Add vsyscall:emulate_vsyscall trace event
Vsyscall emulation is slow, so make it easy to track down.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/cdaad7da946a80b200df16647c1700db3e1171e9.1312378163.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04 16:13:53 -07:00
Andy Lutomirski
318f5a2a67 x86-64: Add user_64bit_mode paravirt op
Three places in the kernel assume that the only long mode CPL 3
selector is __USER_CS.  This is not true on Xen -- Xen's sysretq
changes cs to the magic value 0xe033.

Two of the places are corner cases, but as of "x86-64: Improve
vsyscall emulation CS and RIP handling"
(c9712944b2), vsyscalls will segfault
if called with Xen's extra CS selector.  This causes a panic when
older init builds die.

It seems impossible to make Xen use __USER_CS reliably without
taking a performance hit on every system call, so this fixes the
tests instead with a new paravirt op.  It's a little ugly because
ptrace.h can't include paravirt.h.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/f4fcb3947340d9e96ce1054a432f183f9da9db83.1312378163.git.luto@mit.edu
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04 16:13:49 -07:00
Andy Lutomirski
5d5791af4c x86-64, xen: Enable the vvar mapping
Xen needs to handle VVAR_PAGE, introduced in git commit:
9fd67b4ed0
x86-64: Give vvars their own page

Otherwise we die during bootup with a message like:

(XEN) mm.c:940:d10 Error getting mfn 1888 (pfn 1e3e48) from L1 entry
      8000000001888465 for l1e_owner=10, pg_owner=10
(XEN) mm.c:5049:d10 ptwr_emulate: could not get_page_from_l1e()
[    0.000000] BUG: unable to handle kernel NULL pointer dereference at (null)
[    0.000000] IP: [<ffffffff8103a930>] xen_set_pte+0x20/0xe0

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/4659478ed2f3480938f96491c2ecbe2b2e113a23.1312378163.git.luto@mit.edu
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04 16:13:47 -07:00
Andy Lutomirski
f670bb760e x86-64: Work around gold bug 13023
Gold has trouble assigning numbers to the location counter inside of
an output section description.  The bug was triggered by
9fd67b4ed0, which consolidated all of
the vsyscall sections into a single section.  The workaround is IMO
still nicer than the old way of doing it.

This produces an apparently valid kernel image and passes my vdso
tests on both GNU ld version 2.21.51.0.6-2.fc15 20110118 and GNU
gold (version 2.21.51.0.6-2.fc15 20110118) 1.10 as distributed by
Fedora 15.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/0b260cb806f1f9a25c00ce8377a5f035d57f557a.1312378163.git.luto@mit.edu
Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04 16:13:38 -07:00
Andy Lutomirski
9c40818da5 x86-64: Move the "user" vsyscall segment out of the data segment.
The kernel's loader doesn't seem to care, but gold complains.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/f0716870c297242a841b949953d80c0d87bf3d3f.1312378163.git.luto@mit.edu
Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04 16:13:35 -07:00
Andy Lutomirski
1bdfac19b3 x86-64: Pad vDSO to a page boundary
This avoids an information leak to userspace.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/a63380a3c58a0506a2f5a18ba1b12dbde1f25e58.1312378163.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04 16:13:34 -07:00
H. Peter Anvin
17b0436077 Merge commit 'v3.0' into x86/vdso 2011-08-04 16:13:20 -07:00
Matthew Garrett
1eb9a4b8a3 efi: Fix argument types for SetVariable() for ia64
The spec says this takes uint32 for attributes, not uintn.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-08-04 16:03:50 -07:00
Igor Mammedov
98f531da84 xen: Fix misleading WARN message at xen_release_chunk
WARN message should not complain
 "Failed to release memory %lx-%lx err=%d\n"
                           ^^^^^^^
about range when it fails to release just one page,
instead it should say what pfn is not freed.

In addition line:
 printk(KERN_INFO "xen_release_chunk: looking at area pfn %lx-%lx: "
 ...
 printk(KERN_CONT "%lu pages freed\n", len);
will be broken if WARN in between this line is fired. So fix it
by using a single printk for this.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-04 15:31:29 -04:00
Igor Mammedov
8f3c5883d8 xen: Fix printk() format in xen/setup.c
Use correct format specifier for unsigned long.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-04 15:31:28 -04:00
Jeremy Fitzhardinge
1e9ea2656b xen/tracing: it looks like we wanted CONFIG_FTRACE
Apparently we wanted CONFIG_FTRACE rather the CONFIG_FUNCTION_TRACER.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-04 15:31:27 -04:00
Linus Torvalds
455ce9d841 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] wire up sendmmsg syscall
  [PARISC] fix return type of __atomic64_add_return
  [PARISC] Fix futex support
2011-08-04 06:36:20 -10:00
Linus Torvalds
447e1363bc Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] signal: use set_restore_sigmask() helper
  [S390] smp: remove pointless comments in startup_secondary()
  [S390] qdio: Use kstrtoul_from_user
  [S390] sclp_async: Use kstrtoul_from_user
  [S390] exec: remove redundant set_fs(USER_DS)
  [S390] cpu hotplug: on cpu start wait until being marked active
  [S390] signal: convert to use set_current_blocked()
  [S390] asm offsets: fix coding style
  [S390] Add support for IBM zEnterprise 114
  [S390] dasd: check if raw track access is supported
  [S390] Use diagnose 308 for system reset
  [S390] Export store_status() function
  [S390] dasd: use vmalloc for statistics input buffer
  [S390] Add PSW restart shutdown trigger
  [S390] missing return in page_table_alloc_pgste
  [S390] qdio: 2nd stage retry on SIGA-W busy conditions
2011-08-04 06:35:51 -10:00
Josip Rodin
a61b582954 sparc: Fix __atomic_add_unless() return value.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-04 02:47:40 -07:00
Sam Ravnborg
fabb5bd96d sparc: use kbuild-generic support for true asm-generic header files
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-04 01:35:12 -07:00
Linus Torvalds
33f35f2a4e x86: don't include xen/xen.h in <asm/io.h> unless XEN is enabled
Dmitry Kasatkin reports:
  "kernel-devel package with kernel headers have no <include/xen>
   directory if XEN is disabled.  Modules which inclide asm/io.h won't
   compile.

   XEN related content is behind the CONFIG_XEN flag in the io.h.  And
   <xen/xen.h> should be also behind CONFIG_XEN flag."

So move the include of <xen/xen.h> down into the section that is
conditional on CONFIG_XEN.

Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 22:00:38 -10:00
Linus Torvalds
35e51fe82d Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  cpuidle: stop depending on pm_idle
  x86 idle: move mwait_idle_with_hints() to where it is used
  cpuidle: replace xen access to x86 pm_idle and default_idle
  cpuidle: create bootparam "cpuidle.off=1"
  mrst_pmu: driver for Intel Moorestown Power Management Unit
2011-08-03 21:54:15 -10:00
Linus Torvalds
c0c770e610 Merge branch 'apei-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'apei-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI, APEI, EINJ Param support is disabled by default
  APEI GHES: 32-bit buildfix
  ACPI: APEI build fix
  ACPI, APEI, GHES: Add hardware memory error recovery support
  HWPoison: add memory_failure_queue()
  ACPI, APEI, GHES, Error records content based throttle
  ACPI, APEI, GHES, printk support for recoverable error via NMI
  lib, Make gen_pool memory allocator lockless
  lib, Add lock-less NULL terminated single list
  Add Kconfig option ARCH_HAVE_NMI_SAFE_CMPXCHG
  ACPI, APEI, Add WHEA _OSC support
  ACPI, APEI, Add APEI bit support in generic _OSC call
  ACPI, APEI, GHES, Support disable GHES at boot time
  ACPI, APEI, GHES, Prevent GHES to be built as module
  ACPI, APEI, Use apei_exec_run_optional in APEI EINJ and ERST
  ACPI, APEI, Add apei_exec_run_optional
  ACPI, APEI, GHES, Do not ratelimit fatal error printk before panic
  ACPI, APEI, ERST, Fix erst-dbg long record reading issue
  ACPI, APEI, ERST, Prevent erst_dbg from loading if ERST is disabled
2011-08-03 21:53:27 -10:00
Russell King
20feaab032 ARM: Fix build error for SMP=n builds
Unfortunately, the module fixups cause the kernel to fail to build
when SMP is not enabled.  Fix this by removing the reference to
fixup_smp on non-SMP fixup kernels, but ensuring that if we do have
the SMP fixup section, we refuse to load the module.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-04 08:24:29 +01:00
WANG Cong
1646ec9db7 cris: add missing declaration of kgdb_init() and breakpoint()
Fix:

  arch/cris/arch-v10/kernel/irq.c:239: error: implicit declaration of function 'kgdb_init'
  arch/cris/arch-v10/kernel/irq.c:240: error: implicit declaration of function 'breakpoint'

Declare these two functions.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:22 -10:00
WANG Cong
b4bc281266 cris: fix the prototype of sync_serial_ioctl()
Fix:

  arch/cris/arch-v10/drivers/sync_serial.c:961: error: conflicting types for 'sync_serial_ioctl'

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:22 -10:00
WANG Cong
4b851d8819 cris: fix a build error in sync_serial_open()
Fix:

  arch/cris/arch-v10/drivers/sync_serial.c:628: error: 'ret' undeclared (first use in this function)

'ret' should be 'err'.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:21 -10:00
WANG Cong
d4969213f9 cris: fix a build error in kernel/fork.c
Fix this error:

  kernel/fork.c:267: error: implicit declaration of function 'alloc_thread_info_node'

This is due to renaming alloc_thread_info() to alloc_thread_info_node().

[akpm@linux-foundation.org: coding-style fixes]
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:21 -10:00
Len Brown
a0bfa13738 cpuidle: stop depending on pm_idle
cpuidle users should call cpuidle_call_idle() directly
rather than via (pm_idle)() function pointer.

Architecture may choose to continue using (pm_idle)(),
but cpuidle need not depend on it:

  my_arch_cpu_idle()
	...
	if(cpuidle_call_idle())
		pm_idle();

cc: Kevin Hilman <khilman@deeprootsystems.com>
cc: Paul Mundt <lethal@linux-sh.org>
cc: x86@kernel.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-03 19:06:37 -04:00
Len Brown
4bfc8288bc x86 idle: move mwait_idle_with_hints() to where it is used
...and make it static

no functional change

cc: x86@kernel.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-03 19:06:36 -04:00
Len Brown
d91ee5863b cpuidle: replace xen access to x86 pm_idle and default_idle
When a Xen Dom0 kernel boots on a hypervisor, it gets access
to the raw-hardware ACPI tables.  While it parses the idle tables
for the hypervisor's beneift, it uses HLT for its own idle.

Rather than have xen scribble on pm_idle and access default_idle,
have it simply disable_cpuidle() so acpi_idle will not load and
architecture default HLT will be used.

cc: xen-devel@lists.xensource.com
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-03 19:06:36 -04:00
Len Brown
6dccf9c508 mrst_pmu: driver for Intel Moorestown Power Management Unit
The Moorestown (MRST) Power Management Unit (PMU) driver
directs the SOC power states in the "Langwell" south complex (SCU).

It hooks pci_platform_pm_ops[] and thus observes all PCI ".set_state"
requests.  For devices in the SC, the pmu driver translates those
PCI requests into the appropriate commands for the SCU.

The PMU driver helps implement S0i3, a deep system idle power idle state.
Entry into S0i3 is via cpuidle, just like regular processor c-states.
S0i3 depends on pre-conditions including uni-processor, graphics off,
and certain IO devices in the SC must be off.  If those pre-conditions
are met, then the PMU allows cpuidle to enter S0i3, otherwise such requests
are demoted, either to Atom C4 or Atom C6.

This driver is based on prototype work by Bruce Flemming,
Illyas Mansoor, Rajeev D. Muralidhar, Vishwesh M. Rudramuni,
Hari Seshadri and Sujith Thomas.  The current driver also
includes contributions from H. Peter Anvin, Arjan van de Ven,
Kristen Accardi, and Yong Wang.

Thanks for additional review feedback from Alan Cox and Randy Dunlap.

Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-03 19:06:12 -04:00
Len Brown
d0e323b470 Merge branch 'apei' into apei-release
Some trivial conflicts due to other various merges
adding to the end of common lists sooner than this one.

	arch/ia64/Kconfig
	arch/powerpc/Kconfig
	arch/x86/Kconfig
	lib/Kconfig
	lib/Makefile

Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-03 11:30:42 -04:00
Huang Ying
df013ffb81 Add Kconfig option ARCH_HAVE_NMI_SAFE_CMPXCHG
cmpxchg() is widely used by lockless code, including NMI-safe lockless
code.  But on some architectures, the cmpxchg() implementation is not
NMI-safe, on these architectures the lockless code may need a
spin_trylock_irqsave() based implementation.

This patch adds a Kconfig option: ARCH_HAVE_NMI_SAFE_CMPXCHG, so that
NMI-safe lockless code can depend on it or provide different
implementation according to it.

On many architectures, cmpxchg is only NMI-safe for several specific
operand sizes. So, ARCH_HAVE_NMI_SAFE_CMPXCHG define in this patch
only guarantees cmpxchg is NMI-safe for sizeof(unsigned long).

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Richard Henderson <rth@twiddle.net>
CC: Mikael Starvik <starvik@axis.com>
Acked-by: David Howells <dhowells@redhat.com>
CC: Yoshinori Sato <ysato@users.sourceforge.jp>
CC: Tony Luck <tony.luck@intel.com>
CC: Hirokazu Takata <takata@linux-m32r.org>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Michal Simek <monstr@monstr.eu>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
CC: Kyle McMartin <kyle@mcmartin.ca>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Chen Liqin <liqin.chen@sunplusct.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Ingo Molnar <mingo@redhat.com>
CC: Chris Zankel <chris@zankel.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-03 11:12:37 -04:00
Heiko Carstens
9e8ed3ae92 [S390] signal: use set_restore_sigmask() helper
We should call set_restore_sigmask() instead of directly setting
TIF_RESTORE_SIGMASK. This change should have been done three years
earlier... see 4e4c22 "signals: add set_restore_sigmask".

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 16:44:21 +02:00
Heiko Carstens
b7f275042f [S390] smp: remove pointless comments in startup_secondary()
Remove pointless comments in startup_secondary(). There is not too much
value in having comments like e.g. "call cpu notifiers" just before a
call to notify_cpu*().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 16:44:21 +02:00
Mathias Krause
ada5ed5484 [S390] exec: remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so those calls to
set_fs(USER_DS) are redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 16:44:20 +02:00
Heiko Carstens
cc34321d58 [S390] cpu hotplug: on cpu start wait until being marked active
This is the same as fd8a7de1 "x86: cpu-hotplug: Prevent softirq wakeup
on wrong CPU".
Unlike on x86 this doesn't fix a bug on s390 since we do not have
threaded interrupt handlers. However we want to keep the same
initialization order like on x86. This should prevent bugs caused by
code which assumes (and relies on) the init order is the same on each
architecture.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 16:44:20 +02:00
Heiko Carstens
391c62feb1 [S390] signal: convert to use set_current_blocked()
Convert to use set_current_blocked() like x86.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 16:44:20 +02:00