Pull ARM fix from Russell King:
"It was noticed that one of Julien's patches contained an error, this
fixes that up"
* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc
c2856ae2f3 ("blk-mq: quiesce queue before freeing queue") has
already fixed this race, however the implied synchronize_rcu()
in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
performance regression.
Then 1311326cf4 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
tried to quiesce queue for avoiding unnecessary synchronize_rcu()
only when queue initialization is done, because it is usual to see
lots of inexistent LUNs which need to be probed.
However, turns out it isn't safe to quiesce queue only when queue
initialization is done. Because when one SCSI command is completed,
the user of sending command can be waken up immediately, then the
scsi device may be removed, meantime the run queue in scsi_end_request()
is still in-progress, so kernel panic can be caused.
In Red Hat QE lab, there are several reports about this kind of kernel
panic triggered during kernel booting.
This patch tries to address the issue by grabing one queue usage
counter during freeing one request and the following run queue.
Fixes: 1311326cf4 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
Cc: Andrew Jones <drjones@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: stable <stable@vger.kernel.org>
Cc: jianchao.wang <jianchao.w.wang@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to
fall into an endless loop in the discard code. The test is creating
a device that is exactly 2^32 sectors in size to test mkfs boundary
conditions around the 32 bit sector overflow region.
mkfs issues a discard for the entire device size by default, and
hence this throws a sector count of 2^32 into
blkdev_issue_discard(). It takes the number of sectors to discard as
a sector_t - a 64 bit value.
The commit ba5d73851e ("block: cleanup __blkdev_issue_discard")
takes this sector count and casts it to a 32 bit value before
comapring it against the maximum allowed discard size the device
has. This truncates away the upper 32 bits, and so if the lower 32
bits of the sector count is zero, it starts issuing discards of
length 0. This causes the code to fall into an endless loop, issuing
a zero length discards over and over again on the same sector.
Fixes: ba5d73851e ("block: cleanup __blkdev_issue_discard")
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Killed pointless WARN_ON().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Register DBUF_CTL_S2 is read and it's value is not used. As
there is no explanation why we should prime the hardware with
read, remove it as spurious.
Fixes: aa9664ffe8 ("drm/i915/icl: Enable 2nd DBuf slice only when needed")
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109140924.2663-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 8577c319b6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The bootloader may pass physical address of the boot parameters structure
to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in
the arch/xtensa/kernel/head.S is supposed to map that physical address to
the virtual address in the configured virtual memory layout.
This code haven't been updated when additional 256+256 and 512+512
memory layouts were introduced and it may produce wrong addresses when
used with these layouts.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When VPHN function is not supported and during cpu hotplug event,
kernel prints message 'VPHN function not supported. Disabling
polling...'. Currently it prints on every hotplug event, it floods
dmesg when a KVM guest tries to hotplug huge number of vcpus, let's
just print once and suppress further kernel prints.
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 95ffe19420 ("selinux: refactor mls_context_to_sid() and make
it stricter") inadvertently changed how we handle labels that did not
contain MLS information. This patch restores the proper behavior in
mls_context_to_sid() and adds a comment explaining the proper
behavior to help ensure this doesn't happen again.
Fixes: 95ffe19420 ("selinux: refactor mls_context_to_sid() and make it stricter")
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In the initial commit [1], I added differential output of the codec as
separate `+` and `-` widgets:
OUTL+
OUTR+
OUTL-
OUTR-
Later, in the commit [2], I added a device tree property to configure the
output as single-ended or differential. Having this property, the `+` and
`-` separation in widgets seems for me confusing. There are no functional
benefits in such separation, so I find reasonable to get rid of it:
OUTL
OUTR
The new naming is more friendly for sound cards, and is better aligned with
other codec drivers in kernel.
Renaming the output widgets now should not be a problem from the backwards-
compatibility perspective, as the driver for PCM3060 is added into the
mainline very recently, and did not yet appear in any releases.
[1] commit 6ee47d4a8d ("ASoC: pcm3060: Add codec driver")
[2] commit a78c62de00d5 ("ASoC: pcm3060: Add DT property for single-ended
output")
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>
Frontend dai_link id is used for closing ADM sessions.
During concurrent usecase when one session is closed,
it closes other ADM session associated with other usecase
too. Dai_link->id should always point to Frontend dai id.
Set cpu_dai id as dai_link id to fix the issue.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
sun8i-codec misses a route from ADC to AIF1 Slot 0 ADC. Add it
to the driver to avoid adding it to every dts.
Fixes: eda85d1fee ("ASoC: sun8i-codec: Add ADC support for a33")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the server sends a CB_GETATTR or a CB_RECALL while the filesystem is
being unmounted, then we can Oops when releasing the inode in
nfs4_callback_getattr() and nfs4_callback_recall().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
On systems with IMA-appraisal enabled with a policy requiring file
signatures, the "good" signature values are stored on the filesystem as
extended attributes (security.ima). Signature verification failure
would normally be limited to just a particular file (eg. executable),
but during boot signature verification failure could result in a system
hang.
Defining and requiring a new public_key_signature field requires all
callers of asymmetric signature verification to be updated to reflect
the change. This patch updates the integrity asymmetric_verify()
caller.
Fixes: 82f94f2447 ("KEYS: Provide software public key query function [ver #2]")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comments with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comments with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Replace the whole switch statement with a for loop. This makes the
code clearer and easy to read.
This also addresses the following Coverity warnings:
Addresses-Coverity-ID: 115090 ("Missing break in switch")
Addresses-Coverity-ID: 115091 ("Missing break in switch")
Addresses-Coverity-ID: 114700 ("Missing break in switch")
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
[daniel.thompson@linaro.org: Tiny grammar change in description]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
gcc 8.1.0 warns with:
kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’:
kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
strncpy(prefix_name, name, strlen(name)+1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/debug/kdb/kdb_support.c:239:31: note: length computed here
Use strscpy() with the destination buffer size, and use ellipses when
displaying truncated symbols.
v2: Use strscpy()
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Since commit ad67b74d24 ("printk: hash addresses printed with %p"),
all pointers printed with %p are printed with hashed addresses
instead of real addresses in order to avoid leaking addresses in
dmesg and syslog. But this applies to kdb too, with is unfortunate:
Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry
kdb> ps
15 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr Pid Parent [*] cpu State Thread Command
0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh
0x(ptrval) 1 0 0 0 S 0x(ptrval) init
0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp
0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp
0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0
0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H
0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0
0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq
0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt
The whole purpose of kdb is to debug, and for debugging real addresses
need to be known. In addition, data displayed by kdb doesn't go into
dmesg.
This patch replaces all %p by %px in kdb in order to display real
addresses.
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
On a powerpc 8xx, 'btc' fails as follows:
Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0x0
when booting the kernel with 'debug_boot_weak_hash', it fails as well
Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0xba99ad80
On other platforms, Oopses have been observed too, see
https://github.com/linuxppc/linux/issues/139
This is due to btc calling 'btt' with %p pointer as an argument.
This patch replaces %p by %px to get the real pointer value as
expected by 'btt'
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
On certain platforms, Display HDMI HDA codec was not going to sleep state
after the use when links are powered down after turning off the display
power. As per the HW recommendation, links are powered down before turning
off the display power to ensure that the codec goes to sleep state.
This patch was updated from an earlier version submitted upstream [1]
which conflicted with the changes merged for HDaudio codec support
with the Intel DSP.
[1] https://patchwork.kernel.org/patch/10540213/
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stack memory isn't DMA-safe so it isn't safe to use either
regmap_raw_read or regmap_bulk_read to read into stack memory.
The two functions to read the scratch registers were using
stack memory and regmap_raw_read. It's not worth allocating
memory just for this trivial read, and it isn't time-critical.
A simple regmap_read for each register is sufficient.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing prepare_sleve_config that is needed for
setup the DMA slave channel for I2S.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
selinux_sctp_bind_connect() must verify if the address buffer has
sufficient length before accessing the 'sa_family' field. See
__sctp_connect() for a similar check.
The length of the whole address ('len') is already checked in the
callees.
Reported-by: Qian Cai <cai@gmx.us>
Fixes: d452930fd3 ("selinux: Add SCTP support")
Cc: <stable@vger.kernel.org> # 4.17+
Cc: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Qian Cai <cai@gmx.us>
Signed-off-by: Paul Moore <paul@paul-moore.com>
We accidentially set the huge flag on the parent instead of the childs.
This caused some VM faults under memory pressure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the clk value should be tranferred to MHz first and
then transfer to uint16. otherwise, the clock value
will be truncated.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The bug limits the IH ring wptr address to 40bit. When the system memory
is bigger than 1TB, the bus address is more than 40bit, this causes the
interrupt cannot be handled and cleared correctly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes:
arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:23:27: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:104:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:146:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:190:60: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:214:24: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:236:23: note: format string is defined here
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Fixes the following build error from tinyconfig:
riscv64-unknown-linux-gnu-ld: kernel/sched/fair.o: in function `.L8':
fair.c:(.text+0x70): undefined reference to `__lshrti3'
riscv64-unknown-linux-gnu-ld: kernel/time/clocksource.o: in function `.L0 ':
clocksource.c:(.text+0x334): undefined reference to `__lshrti3'
Fixes: 7f47c73b35 ("RISC-V: Build tishift only on 64-bit")
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Building kernel 4.20 for Fedora as RPM fails, because riscv is missing
vdso_install target in arch/riscv/Makefile.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Replace 8 spaces with tab to match styling.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The printk timestamps are very useful information to visually see
where kernel is spending time during boot. It also helps us see
the timing of hotplug events at runtime.
This patch enables printk timestamps in RISC-V defconfig so that
we have it enabled by default (similar to other architectures
such as x86_64, arm64, etc).
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Commit 07d02a67b7 causes a use-after free in the RPCSEC_GSS credential
destroy code, because the call to get_rpccred() in gss_destroying_context()
will now always fail to increment the refcount.
While we could just replace the get_rpccred() with a refcount_set(), that
would have the unfortunate consequence of resurrecting a credential in
the credential cache for which we are in the process of destroying the
RPCSEC_GSS context. Rather than do this, we choose to make a copy that
is never added to the cache and use that to destroy the context.
Fixes: 07d02a67b7 ("SUNRPC: Simplify lookup code")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we exit the NFSv4 state manager due to a umount, then we can end up
leaving the NFS4CLNT_MANAGER_RUNNING flag set. If another mount causes
the nfs4_client to be rereferenced before it is destroyed, then we end
up never being able to recover state.
Fixes: 47c2199b6e ("NFSv4.1: Ensure state manager thread dies on last ...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.15+
In XGMI configuration, the FB region covers vram region from peer
device, adjust system aperture to cover all of them
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
med_power_with_dipm still causes freezes after updating the firmware to
the latest version (DXT04L5Q).
Set model_rev to NULL and blacklist the device.
Cc: stable@vger.kernel.org
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to copy the io priority, too; otherwise the clone will run
with a different priority than the original one.
Fixes: 43b62ce3ff ("block: move bio io prio to a new field")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixed up subject, and ordered stores.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When copying to the latency type, we should be passing LATENCY_TYPE_LEN,
not DOMAIN_LEN (this isn't a problem in practice because we only pass
"total" or "I/O"). Fix it by changing all of the strlcpy() calls to use
sizeof().
Fixes: 6c3b7af1c9 ("kyber: add tracepoints")
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In my haste to remove irq_port[] I accidentally changed the
way we deal with hpd pins that are shared by multiple encoders
(DP and HDMI for pre-DDI platforms). Previously we would only
handle such pins via ->hpd_pulse(), but now we queue up the
hotplug work for the HDMI encoder directly. Worse yet, we now
count each hpd twice and this increment the hpd storm count
twice as fast. This can lead to spurious storms being detected.
Go back to the old way of doing things, ie. delegate to
->hpd_pulse() for any pin which has an encoder with that hook
implemented. I don't really like the idea of adding irq_port[]
back so let's loop through the encoders first to check if we
have an encoder with ->hpd_pulse() for the pin, and then go
through all the pins and decided on the correct course of action
based on the earlier findings.
I have occasionally toyed with the idea of unifying the pre-DDI
HDMI and DP encoders into a single encoder as well. Besides the
hotplug processing it would have the other benefit of preventing
userspace from trying to enable both encoders at the same time.
That is simply illegal as they share the same clock/data pins.
We have some testcases that will attempt that and thus fail on
many older machines. But for now let's stick to fixing just the
hotplug code.
Cc: stable@vger.kernel.org # 4.19+
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: b6ca3eee18 ("drm/i915: Nuke dev_priv->irq_port[]")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108200424.28371-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit 5a3aeca97a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To enable DC5/6 power well 2 has to be disabled as for previous
platforms, so fix things up.
Bspec: 4234
Fixes: 67ca07e7ac ("drm/i915/icl: Add power well support")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102182200.17219-1-imre.deak@intel.com
(cherry picked from commit a33e1ece77)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This hasn't caused any issues yet that I'm aware of, but as Ville
Syrjälä pointed out - we need to make sure that
intel_connector->mst_port is set before initializing MST connectors,
since in theory we could potentially check intel_connector->mst_port in
i915_hpd_poll_init_work() after registering the connector but before
having written it's value.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-2-lyude@redhat.com
(cherry picked from commit 66a5ab1034)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Exercising the gpu reloc path strenuously revealed an issue where the
updated relocations (from MI_STORE_DWORD_IMM) were not being observed
upon execution. After some experiments with adding pipecontrols (a lot
of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe
controls or even the current on), it was discovered that we merely
needed to delay the EMIT_INVALIDATE by several flushes. It is important
to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that
needs the delay as opposed to what one might first expect -- that the
delay is required for the TLB invalidation to take effect (one presumes
to purge any CS buffers) as opposed to a delay after flushing to ensure
the writes have landed before triggering invalidation.
Testcase: igt/gem_tiled_fence_blits
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk
(cherry picked from commit 55f99bf2a9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We need to call pci_iounmap() instead of iounmap() for the regions
obtained via pci_iomap() call for some archs that need special
treatment.
Fixes: aa31704fd8 ("ALSA: hda/ca0132: Add PCI region2 iomap for SBZ")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In big.Little systems, some CPUs require the Spectre workarounds in
paths such as the context switch, but other CPUs do not. In order
to handle these differences, we need per-CPU vtables.
We are unable to use the kernel's per-CPU variables to support this
as per-CPU is not initialised at times when we need access to the
vtables, so we have to use an array indexed by logical CPU number.
We use an array-of-pointers to avoid having function pointers in
the kernel's read/write .data section.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
