In many places, ioremap_prot() and __ioremap() can be replaced with
higher level functions like ioremap(), ioremap_coherent(),
ioremap_cache(), ioremap_wc() ...
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ioremap_prot() with flag set to 0 relies on a hack in
__ioremap_caller() which adds PAGE_KERNEL flags when the
handed flags don't look like a valid set of flags
(ie don't include _PAGE_PRESENT)
The intention being to map cached memory, use ioremap_cache() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
_PAGE_NO_CACHE is a platform specific flag. In addition, this flag
is misleading because one would think it requests a noncached page
whereas a noncached page is _PAGE_NO_CACHE | _PAGE_GUARDED
_PAGE_NO_CACHE alone means write combined noncached page, so lets
use ioremap_wc() instead.
_PAGE_WRITETHRU is also platform specific flag. Use ioremap_wt()
instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Other arches have ioremap_wt() to map IO areas write-through.
Implement it on PPC as well in order to avoid drivers using
__ioremap(_PAGE_WRITETHRU)
Also implement ioremap_coherent() to avoid drivers using
__ioremap(_PAGE_COHERENT)
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Live Partition Migrations require all the present CPUs to execute the
H_JOIN call, and hence rtas_ibm_suspend_me() onlines any offline CPUs
before initiating the migration for this purpose.
The commit 85a88cabad
("powerpc/pseries: Disable CPU hotplug across migrations")
disables any CPU-hotplug operations once all the offline CPUs are
brought online to prevent any further state change. Once the
CPU-Hotplug operation is disabled, the code assumes that all the CPUs
are online.
However, there is a minor window in rtas_ibm_suspend_me() between
onlining the offline CPUs and disabling CPU-Hotplug when a concurrent
CPU-offline operations initiated by the userspace can succeed thereby
nullifying the the aformentioned assumption. In this unlikely case
these offlined CPUs will not call H_JOIN, resulting in a system hang.
Fix this by verifying that all the present CPUs are actually online
after CPU-Hotplug has been disabled, failing which we restore the
state of the offline CPUs in rtas_ibm_suspend_me() and return an
-EBUSY.
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently on POWER9 SMT8 cores systems, in sysfs, we report the
shared_cache_map for L1 caches (both data and instruction) to be the
cpu-ids of the threads in SMT8 cores. This is incorrect since on
POWER9 SMT8 cores there are two groups of threads, each of which
shares its own L1 cache.
This patch addresses this by reporting the shared_cpu_map correctly in
sysfs for L1 caches.
Before the patch
/sys/devices/system/cpu/cpu0/cache/index0/shared_cpu_map : 000000ff
/sys/devices/system/cpu/cpu0/cache/index1/shared_cpu_map : 000000ff
/sys/devices/system/cpu/cpu1/cache/index0/shared_cpu_map : 000000ff
/sys/devices/system/cpu/cpu1/cache/index1/shared_cpu_map : 000000ff
After the patch
/sys/devices/system/cpu/cpu0/cache/index0/shared_cpu_map : 00000055
/sys/devices/system/cpu/cpu0/cache/index1/shared_cpu_map : 00000055
/sys/devices/system/cpu/cpu1/cache/index0/shared_cpu_map : 000000aa
/sys/devices/system/cpu/cpu1/cache/index1/shared_cpu_map : 000000aa
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 SMT8 cores consist of two groups of threads, where threads in
each group shares L1-cache. The scheduler is not aware of this
distinction as the current sched-domain hierarchy has all the threads
of the core defined at the SMT domain.
SMT [Thread siblings of the SMT8 core]
DIE [CPUs in the same die]
NUMA [All the CPUs in the system]
Due to this, we can observe run-to-run variance when we run a
multi-threaded benchmark bound to a single core based on how the
scheduler spreads the software threads across the two groups in the
core.
We fix this in this patch by defining each group of threads which
share L1-cache to be the SMT level. The group of threads in the SMT8
core is defined to be the CACHE level. The sched-domain hierarchy
after this patch will be :
SMT [Thread siblings in the core that share L1 cache]
CACHE [Thread siblings that are in the SMT8 core]
DIE [CPUs in the same die]
NUMA [All the CPUs in the system]
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On IBM POWER9, the device tree exposes a property array identifed by
"ibm,thread-groups" which will indicate which groups of threads share
a particular set of resources.
As of today we only have one form of grouping identifying the group of
threads in the core that share the L1 cache, translation cache and
instruction data flow.
This patch adds helper functions to parse the contents of
"ibm,thread-groups" and populate a per-cpu variable to cache
information about siblings of each CPU that share the L1, traslation
cache and instruction data-flow.
It also defines a new global variable named "has_big_cores" which
indicates if the cores on this configuration have multiple groups of
threads that share L1 cache.
For each online CPU, it maintains a cpu_smallcore_mask, which
indicates the online siblings which share the L1-cache with it.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If GCC is not built with glibc support then we must explicitly tell it
which register to use for TLS mode stack protector, otherwise it will
error out and the cc-option check will fail.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 6c1719942e ("powerpc/of: Remove useless register save/restore
when calling OF back") removed the saving of srr0 and srr1 when calling
into OpenFirmware. Commit e31aa453bb ("powerpc: Use LOAD_REG_IMMEDIATE
only for constants on 64-bit") did the same for rtas.
This means we don't need to save the extra stack space and can use
the common SWITCH_FRAME_SIZE.
There were already no users of _SRR0 and _SRR1 so we can remove them
too.
Link: https://github.com/linuxppc/linux/issues/83
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powerpc mobility code may receive RTAS requests to perform PRRN
(Platform Resource Reassignment Notification) topology changes at any
time, including during LPAR migration operations.
In some configurations where the affinity of CPUs or memory is being
changed on that platform, the PRRN requests may apply or refer to
outdated information prior to the complete update of the device-tree.
This patch changes the duration for which topology updates are
suppressed during LPAR migrations from just the rtas_ibm_suspend_me()
/ 'ibm,suspend-me' call(s) to cover the entire migration_store()
operation to allow all changes to the device-tree to be applied prior
to accepting and applying any PRRN requests.
For tracking purposes, pr_info notices are added to the functions
start_topology_update() and stop_topology_update() of 'numa.c'.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ever since commit 15a3204d24 ("powerpc/64s: Set assembler machine type
to POWER4") we force -mpower4 to be passed to the assembler
irrespective of the CFLAGS used (for Book3s 64).
When building a powerpc64 kernel with clang, clang will not add -many
to the assembler flags, so any instructions that the compiler has
generated that are not available on power4 will cause an error:
/usr/bin/as -a64 -mppc64 -mlittle-endian -mpower8 \
-I ./arch/powerpc/include -I ./arch/powerpc/include/generated \
-I ./include -I ./arch/powerpc/include/uapi \
-I ./arch/powerpc/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi -I arch/powerpc -I arch/powerpc \
-maltivec -mpower4 -o init/do_mounts.o /tmp/do_mounts-3b0a3d.s
/tmp/do_mounts-51ce54.s:748: Error: unrecognized opcode: `isel'
GCC does include -many, so the GCC driven gas call will succeed:
as -v -I ./arch/powerpc/include -I ./arch/powerpc/include/generated -I
./include -I ./arch/powerpc/include/uapi
-I ./arch/powerpc/include/generated/uapi -I ./include/uapi
-I ./include/generated/uapi -I arch/powerpc -I arch/powerpc
-a64 -mpower8 -many -mlittle -maltivec -mpower4 -o init/do_mounts.o
Note that isel is power7 and above for IBM CPUs. GCC only generates it
for Power9 and above, but the above test was run against the clang
generated assembly.
Peter Bergner explains:
When using -many -mpower4, gas will first try and find a matching
power4 mnemonic and failing that, it will then allow any valid
mnemonic that gas knows about. GCC's use of -many predates me
though.
IIRC, Alan looked at trying to remove it, but I forget why he
didn't. Could be either a gcc or gas issue at the time. I'm not sure
whether issue still exists or not. He and I have modified how gas
works internally a fair amount since he tried removing gcc use of
-many.
I will also note that when using -many, gas will choose the first
mnemonic that matches in the mnemonic table and we have (mostly)
sorted the table so that server mnemonics show up earlier in the
table than other mnemonics, so they'll be seen/chosen first.
By explicitly setting -many we can build with Clang and GCC while
retaining the -mpower4 option.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The variable 'aa_index' is defined as an unsigned value in
update_lmb_associativity_index(), but find_aa_index() may return -1
when dlpar_clone_property() fails. So change find_aa_index() to return
a bool, which indicates whether 'aa_index' was found or not.
Fixes: c05a5a4096 ("powerpc/pseries: Dynamic add entires to associativity lookup array")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Nathan Fontenot nfont@linux.vnet.ibm.com>
[mpe: Tweak changelog, rename is_found to just found]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rather than mixing "if (state)" blocks and gotos, convert entirely to
"if (state)" blocks to make the state machine behaviour clearer.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The wait_state member of eeh_ops does not need to be platform
dependent; it's just logic around eeh_ops.get_state(). Therefore,
merge the two (slightly different!) platform versions into a new
function, eeh_wait_state() and remove the eeh_ops member.
While doing this, also correct:
* The wait logic, so that it never waits longer than max_wait.
* The wait logic, so that it never waits less than
EEH_STATE_MIN_WAIT_TIME.
* One call site where the result is treated like a bit field before
it's checked for negative error values.
* In pseries_eeh_get_state(), rename the "state" parameter to "delay"
because that's what it is.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, eeh_pe_state_mark() marks a PE (and it's children) with a
state and then performs additional processing if that state included
EEH_PE_ISOLATED.
The state parameter is always a constant at the call site, so
rearrange eeh_pe_state_mark() into two functions and just call the
appropriate one at each site.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The function eeh_pe_state_mark_with_cfg() just performs the work of
eeh_pe_state_mark() and then, conditionally, the work of
eeh_pe_state_clear(). However it is only ever called with a constant
state such that the condition is always true, so replace it by direct
calls.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the call to eeh_dev_to_pe() up, so that later it's clear that
"pe" isn't NULL.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Change the name of the fields in eeh_rmv_data to clarify their usage.
Change "edev_list" to "removed_vf_list" because it does not contain
generic edevs, but rather only edevs that contain virtual functions
(which need to be removed during recovery).
Similarly, change "removed" to "removed_dev_count" because it is a
count of any removed devices, not just those in the above list.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instances of struct eeh_pe are placed in a tree structure using the
fields "child_list" and "child", so place these next to each other
in the definition.
The field "child" is a list entry, so remove the unnecessary and
misleading use of the list initializer, LIST_HEAD(), on it.
The eeh_dev struct contains two list entry fields, called "list" and
"rmv_list". Rename them to "entry" and "rmv_entry" and, as above, stop
initializing them with LIST_HEAD().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove the unnecessary cast through void * on the first parameter and
remove the unused second parameter (always NULL).
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 'bus' member of struct eeh_dev is assigned to once but never used,
so remove it.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently a flag, EEH_POSTPONED_PROBE, is used to prevent an incorrect
message "EEH: No capable adapters found" from being displayed during
the boot of powernv systems.
It is necessary because, on powernv, the call to eeh_probe_devices()
made from eeh_init() is too early and EEH can't yet be enabled. A
second call is made later from eeh_pnv_post_init(), which succeeds.
(On pseries, the first call succeeds because PCI devices are set up
early enough and no second call is made.)
This can be simplified by moving the early call to eeh_probe_devices()
from eeh_init() (where it's seen by both platforms) to
pSeries_final_fixup(), so that each platform only calls
eeh_probe_devices() once, at a point where it can succeed.
This is slightly later in the boot sequence, but but still early
enough and it is now in the same place in the sequence for both
platforms (the pcibios_fixup hook).
The display of the message can be cleaned up as well, by moving it
into eeh_probe_devices().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.
However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.
The clear statement was added by commit 807a827d4e ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If a device is removed during EEH processing (either by a driver's
handler or as part of recovery), it can lead to a null dereference
in eeh_pe_report_edev().
To handle this, skip devices that have been removed.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If an error occurs during an unplug operation, it's possible for
eeh_dump_dev_log() to be called when edev->pdn is null, which
currently leads to dereferencing a null pointer.
Handle this by skipping the error log for those devices.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The boot wrapper is currently built with -Os. By building with O2 we
can meaningfully reduce the time decompressing the kernel.
I tested by comparing 10 runs of each option in Qemu and on hardware.
The kernel is compressed with KERNEL_XZ built with GCC 8.2.0-7ubuntu1.
The values are counts of the timebase.
Qemu TCG powernv Power8:
Os O2 O3
median 10221123889 6201518438 6568186825
stddev 1361267211 429090641 657930076
improvement 39.33% 35.74%
Palmetto Power8:
Os O2 O3
median 50279 50599 35790
stddev 992144533 627130655 623721078
improvement 36.79% 37.13%
Romulus Power9:
Os O2 O3
median 670312391 454733720 448881398
stddev 157569 107276 108760
improvement 32.16% 33.03%
TCG was quite noisy, with every few runs producing an outlier. Even so,
O2 is faster than O3. On hardware the numbers were less noisy and O3 is
slightly faster than O2.
The wrapper size increases when moving from Os. Comparing zImage.epapr
to the existing Os build using bloat-o-meter:
Before=43401, After=56837 (13KB), chg +30.96%
Before=43401, After=64305 (20KB), chg +48.16%
I chose O2 for a balance between Qemu and hardware speed up.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This will avoid auto-vectorisation when building with higher
optimisation levels.
We don't know if the machine can support VSX and even if it's present
it's probably not going to be enabled at this point in boot.
These flag were both added prior to GCC 4.6 which is the minimum
compiler version supported by upstream, thanks to Segher for the
details.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As of commit 10c77dba40 ("powerpc/boot: Fix build failure in 32-bit
boot wrapper") the opal code is hidden behind CONFIG_PPC64_BOOT_WRAPPER,
but the boot wrapper avoids include/linux, so it does not get the normal
Kconfig flags.
We can drop the guard entirely as in commit f8e8e69cea ("powerpc/boot:
Only build OPAL code when necessary") the makefile only includes opal.c
in the build if CONFIG_PPC64_BOOT_WRAPPER is set.
Fixes: 10c77dba40 ("powerpc/boot: Fix build failure in 32-bit boot wrapper")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the wrapper is built without including anything in
$(src)/include/, which means there are no CONFIG_ symbols defined.
This means the platform specific serial drivers were never enabled.
We now copy the definitions into the boot directory, so any C file can
now include autoconf.h to depend on configuration options.
Fixes: 866bfc75f4 ("powerpc: conditionally compile platform-specific serial drivers")
Signed-off-by: Joel Stanley <joel@jms.id.au>
[mpe: Fix to use $(objtree) to find autoconf.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently when we get an unknown RTAS event it prints the type as
"Unknown" and no other useful information. Add the raw type code to the
log message so that we have something to work off.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powerpc kernel uses setjmp which causes a warning when building
with clang:
In file included from arch/powerpc/xmon/xmon.c:51:
./arch/powerpc/include/asm/setjmp.h:15:13: error: declaration of
built-in function 'setjmp' requires inclusion of the header <setjmp.h>
[-Werror,-Wbuiltin-requires-header]
extern long setjmp(long *);
^
./arch/powerpc/include/asm/setjmp.h:16:13: error: declaration of
built-in function 'longjmp' requires inclusion of the header <setjmp.h>
[-Werror,-Wbuiltin-requires-header]
extern void longjmp(long *, long);
^
This *is* the header and we're not using the built-in setjump but
rather the one in arch/powerpc/kernel/misc.S. As the compiler warning
does not make sense, it for the files where setjmp is used.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[mpe: Move subdir-ccflags in xmon/Makefile to not clobber -Werror]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The "count < sizeof(struct os_area_db)" comparison is type promoted to
size_t so negative values of "count" are treated as very high values
and we accidentally return success instead of a negative error code.
This doesn't really change runtime much but it fixes a static checker
warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On a Power9 box we get a few screens full of these on boot. Drop
them to pr_debug.
[ 5.993645] nest_centaur6_imc performance monitor hardware support registered
[ 5.993728] nest_centaur7_imc performance monitor hardware support registered
[ 5.996510] core_imc performance monitor hardware support registered
[ 5.996569] nest_mba0_imc performance monitor hardware support registered
[ 5.996631] nest_mba1_imc performance monitor hardware support registered
[ 5.996685] nest_mba2_imc performance monitor hardware support registered
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
instructions_to_print var is assigned value 16 and there is no
way to change it.
This patch replaces it by a constant.
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When two processes crash at the same time, we sometimes encounter
interleaving in the middle of a line:
init[1]: segfault (11) at 0 nip 0 lr 0 code 1
init[1]: code: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
init[74]: segfault (11) at 10a74 nip 1000c198 lr 100078c8 code 1 in sh[10000000+14000]
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
init[1]: code: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
init[74]: code: 90010024 bf61000c 91490a7c 3fa01002 3be00000 7d3e4b78 3bbd0c20 3b600000
init[74]: code: 3b9d0040 7c7fe02e 2f830000 419e0028 <89230000> 2f890000 41be001c 4b7f6e79
This patch fixes it by preparing complete lines in a buffer and
printing it at once.
Fixes: 88b0fe1757 ("powerpc: Add show_user_instructions()")
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Use seq_buf_printf() not seq_buf_puts() which doesn't NULL terminate]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As spotted by sparse:
arch/powerpc/kernel/process.c:1302:6: warning: symbol 'show_user_instructions' was not declared. Should it be static?
Fixes: 88b0fe1757 ("powerpc: Add show_user_instructions()")
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the following warnings, which are leftovers
from when __get_user() was replaced by probe_kernel_address().
arch/powerpc/kernel/process.c:1287:22: warning: incorrect type in argument 2 (different address spaces)
arch/powerpc/kernel/process.c:1287:22: expected void const *src
arch/powerpc/kernel/process.c:1287:22: got unsigned int [noderef] <asn:1>*<noident>
arch/powerpc/kernel/process.c:1319:21: warning: incorrect type in argument 2 (different address spaces)
arch/powerpc/kernel/process.c:1319:21: expected void const *src
arch/powerpc/kernel/process.c:1319:21: got unsigned int [noderef] <asn:1>*<noident>
Fixes: 7b051f665c ("powerpc: Use probe_kernel_address in show_instructions")
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add missing severity level to log messages.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Modifying the request queue or changing the current state requires
mutual exclusion. Use local_irq_disable() consistently for this
rather than disabling the ADB interrupt. This simplifies the locking
scheme and brings via-macii into line with the other ADB drivers.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The BUG_ON assertions I added to the via-macii driver over a decade ago
haven't fired AFAIK. Some can never fire (by inspection). One assertion
checks for a NULL pointer, but that would merely substitute a BUG crash
for an Oops crash. Remove the pointless BUG_ON assertions and replace
the others with a WARN_ON and an array bounds check.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make the reset operation synchronous, like the other ADB drivers.
The reset request is static data but callers may not know that.
This way the struct is not in use when the reset method returns.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Avoid the KERN_CONT problem by avoiding message fragments. The problem
arises during async ADB bus probing, when ADB messages may get mixed up
with other messages. See also, commit 4bcc595ccd ("printk: reinstate
KERN_CONT for printing continuation lines").
Remove a number of printk() continuation lines by logging handler
changes in adb_try_handler_change() instead.
This patch addresses the problematic use of "\n" at the beginning of
pr_cont() messages, which got overlooked in commit f2be629568
("macintosh/adb: Properly mark continued kernel messages").
That commit also changed printk(KERN_DEBUG ...) to pr_debug(...), which
hinders work on low-level ADB driver bugs. Revert that change.
Cc: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
